embedded IPsec - IPsec library

00001 
00005 /**************************/
00006 /* inbound configurations */
00007 /**************************/
00008 
00009 /* SAD configuartion data */
00010 sad_entry inbound_sad_config[IPSEC_MAX_SAD_ENTRIES] = {
00011         SAD_ENTRY(      192,168,1,3, 255,255,255,255, 
00012                                 0x1002, 
00013                                 IPSEC_PROTO_ESP, IPSEC_TUNNEL, 
00014                                 IPSEC_3DES, 
00015                                 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67,
00016                                 0,  
00017                                 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
00018                           ),
00019           EMPTY_SAD_ENTRY,
00020           EMPTY_SAD_ENTRY,
00021           EMPTY_SAD_ENTRY,
00022           EMPTY_SAD_ENTRY
00023 
00024 };
00025 
00026 /* SPD configuration data */
00027 spd_entry inbound_spd_config[IPSEC_MAX_SAD_ENTRIES] = {
00028 /*            source                            destination                       protocol          ports         policy          SA pointer 
00029  *            address          network          address          network                            src    dest                              */
00030         SPD_ENTRY(  192,168,1,5,     255,255,255,255, 192,168,1,3,     255,255,255,255, 0,                              0,     0,     POLICY_APPLY,   &inbound_sad_config[0]),
00031         EMPTY_SPD_ENTRY,
00032         EMPTY_SPD_ENTRY,
00033         EMPTY_SPD_ENTRY,
00034         EMPTY_SPD_ENTRY
00035 };
00036 
00037 
00038 /***************************/
00039 /* outbound configurations */
00040 /***************************/
00041 
00042 /* SAD configuartion data */
00043 sad_entry outbound_sad_config[IPSEC_MAX_SAD_ENTRIES] = {
00044         SAD_ENTRY(      192,168,1,5, 255,255,255,255, 
00045                                 0x1002, 
00046                                 IPSEC_PROTO_ESP, IPSEC_TUNNEL, 
00047                                 IPSEC_3DES, 
00048                                 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67,
00049                                 0,  
00050                                 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
00051                   ),
00052         EMPTY_SAD_ENTRY,
00053         EMPTY_SAD_ENTRY,                          
00054         EMPTY_SAD_ENTRY,
00055         EMPTY_SAD_ENTRY
00056 };
00057 
00058 /* SPD configuration data */
00059 spd_entry outbound_spd_config[IPSEC_MAX_SPD_ENTRIES] = {
00060 /*            source                            destination                       protocol          ports         policy          SA pointer 
00061  *            address          network          address          network                            src    dest                              */
00062         SPD_ENTRY(  192,168,1,3,     255,255,255,255, 192,168,1,5,     255,255,255,255, 0,                              0,     0,     POLICY_APPLY,   &outbound_sad_config[0]),
00063         EMPTY_SPD_ENTRY,
00064         EMPTY_SPD_ENTRY,
00065         EMPTY_SPD_ENTRY,
00066         EMPTY_SPD_ENTRY
00067 };
00068
source code documentation

keil_1002_esp_3des.h
