ISerialPort Interface

All SerialPort objects in SerialPortNET implement this interface.

Namespace: SerialPortNET
Assembly: SerialPortNET (in SerialPortNET.dll) Version: 1.0.0.0 (1.0.0.0)

Syntax

public interface ISerialPort : IDisposable

Public Interface ISerialPort
	Inherits IDisposable

public interface class ISerialPort : IDisposable

type ISerialPort =  
    interface
        interface IDisposable
    end

The ISerialPort type exposes the following members.

Properties

	Name	Description
	BaudRate	Gets or sets the serial baud rate.
	BytesToRead	Gets the number of bytes of data in the receive buffer.
	BytesToWrite	Gets the number of bytes of data in the send buffer.
	DataBits	Gets or sets the standard length of data bits per byte.
	DtrControl	Gets or sets a value that enables the Data Terminal Ready (DTR) signal during serial communication.
	IsOpen	Gets a value indicating the open or closed status of the SerialPort object.
	IsRunning	Gets a value indicating the running status of the SerialPort object.
	Parity	Gets or sets the parity-checking protocol.
	PortName	Gets or sets the port for communications, including but not limited to all available COM ports.
	ReceivedBytesThreshold	Gets or sets the number of bytes in the internal input buffer before a DataReceived event occurs.
	StopBits	Gets or sets the standard number of stop bits per byte.

Methods

	Name	Description
	Close	Closes this serial port instance.
	Dispose	Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources. (Inherited from IDisposable.)
	Open	Opens the port.
	Read	Reads a number of bytes from the SerialPort input buffer and writes those bytes into a byte array at the specified offset.
	ReadAll	Reads all bytes from the SerialPort input buffer.
	RunAsync	Run asynchronous operation.
	StopAsync	Stop the asynchronous operation.
	Write	Writes a specified number of bytes to the serial port using data from a buffer.
	WriteAll	Writes all bytes to the serial port.

Events

	Name	Description
	DataReceived	If RunAsync() is called, this event is raised when new data is available in the input buffer of the serial port.