{ "product": "YSK Server", "tagline": "以 AI 為核心、安全優先的 Linux 伺服器管理平台", "company": "YSK Limited", "agents": { "title": "人工智能代理運行時", "body": "OpenClaw／Hermes／IonClaw 的安裝與監督；所有工具呼叫須經允許清單與審批。", "status": { "running": "運行中", "activating": "啟動中", "stuck": "啟動卡住", "connected": "上線", "registered": "僅登記", "stale": "逾時", "disconnected": "離線", "not_installed": "未安裝", "failed": "失敗", "error": "失敗", "unknown": "未探測", "fallback": "未知" }, "cmdStatus": { "queued": "已排隊", "acked": "已確認", "done": "已完成", "error": "錯誤" }, "activatingStuckHint": "啟動超過 5 分鐘，已當失敗。請查日誌。", "noOnlineAgents": "無上線代理", "journal": "日誌", "writeUnit": "寫入服務單元", "writeUnitConfirm": "把 {{kind}} 的 systemd 服務單元寫入 /etc/systemd。服務不會啟動或啟用。", "liveN": "{{count}} 上線", "registeredOnly": "僅登記", "awaitProbe": "待探測", "runtimes": "運行時", "running": "運行中", "liveAgents": "上線代理", "fleet": "機群", "aiTasks": "人工智能任務", "expBanner": "實驗功能。", "expBody": "登記 ≠ 上線。真實運維請用命令列：", "expDocs": "儲存庫文件：", "expEdge": "邊緣節點：", "expPayload": "指令負載示例：", "fleetCan": "機群能做什麼", "fleetCanDesc": "不是空殼列表 — 以下是控制面對邊緣節點的真實能力", "capRegister": "登記", "capRegisterD": "寫入控制面清單（狀態「僅登記」）— 不代表進程已跑", "capCommand": "下指令", "capCommandD": "命令列預設（就緒檢查 / 主機 / 專案…）或自訂；邊緣 提取 後跑 ysk-server 並 回報", "capHistory": "指令紀錄", "capHistoryD": "queued / done / error、exit code、pretty JSON result", "capDelete": "刪除", "capDeleteD": "移除 工作階段 與相關訊息", "capStatus": "狀態", "capStatusD": "僅登記 → 上線（心跳）→ 逾時（>60s 無心跳）→ 離線（已斷線／再無心跳）", "statusFlowTitle": "狀態流程", "statusFlow": "僅登記 → 上線 → 逾時（>60s）→ 離線。篩選「離線」即已斷線。", "colSession": "工作階段 UUID", "copySession": "複製 session UUID，供叢集／CLI --session 使用", "staleFor": "逾時 {{age}}", "commandTitle": "把指令排入此工作階段", "historyTitleShort": "開啟指令紀錄（唯讀）", "fleetTitle": "機群（{{count}}）", "fleetDesc": "控制面登記清單 · 登記 ≠ 節點已上線", "registerPlus": "+ 登記代理", "colId": "識別碼", "colStatus": "狀態", "colGroup": "群組", "colLastSeen": "最後上線", "command": "下指令", "history": "紀錄", "emptyAgents": "尚未登記代理", "emptyAgentsDesc": "用列表右上角登記，或等邊緣進程自行 登記", "historyTitle": "指令紀錄 · {{id}}", "historyDesc": "已排隊的指令會等待節點提取；完成或錯誤即為回報。命令列結果含結束代碼與 JSON（約四秒自動重新整理）。", "refreshHistory": "重新整理紀錄", "colTime": "時間", "finishedAt": "完成 {{at}}", "colCommand": "指令", "colResult": "結果摘要", "colExit": "結束代碼", "hasResult": "有結果", "emptyCmds": "尚未有指令", "emptyCmdsDesc": "按「下指令」排隊；邊緣 代理 未上線時會一直 已排隊", "edgeOnlineTitle": "邊緣 代理 如何真正上線", "edgeOnlineDesc": "面板完成登記後，節點須運行外連迴圈，才會送出心跳並提取指令。", "controlPlaneApi": "控制面 介面：", "controlPlaneHint": "（需網絡可達；生產請改成實際面板地址）", "queueNote": "未有邊緣進程時，「下指令」仍然有效：會入佇列（已排隊），等 代理 上線再消化。", "runtimeTitle": "人工智能 運行時", "runtimeDesc": "探測路徑與 服務單元；安裝會嘗試 啟用 系統服務（需系統變更與管理員權限）", "emptyRuntime": "尚未有探測結果", "emptyRuntimeDesc": "按重新整理載入運行時清單，或逐個探測", "pathExists": "已存在", "pathMissing": "尚未安裝", "unitUnknown": "{{unit}} · 未知", "unitFallback": "服務單元", "path": "路徑", "probe": "探測", "install": "安裝", "recentOps": "最近操作", "registerTitle": "登記 代理", "registerDesc": "只寫入控制面清單；不等於節點已上線", "register": "登記", "agentId": "代理 識別碼", "agentIdHint": "唯一 識別碼，例如 邊緣-1 或 office-gateway", "group": "群組", "groupHint": "用於分區／列表篩選", "registerNote": "狀態會顯示「僅登記」。節點跑 外連 代理 並 心跳 後才變「上線」。", "cmdTitle": "下指令 · {{id}}", "cmdTitlePlain": "下指令", "cmdDesc": "寫入佇列；邊緣 代理 提取 後執行並 回報（未上線會一直 已排隊）", "enqueue": "排隊", "cmdPreset": "指令（命令列 優先）", "cmdTypeAria": "指令類型", "customCli": "自訂 命令列", "cliArgs": "命令列 參數", "cliArgsHint": "無須寫入 ysk-server；例如：logs journal --unit nginx.service", "cmdNote": "邊緣 ysk-server 代理收到命令列 JSON 後，會在本機執行命令列（自動加上 --json）。變更系統仍須在邊緣開啟系統變更權限。完成後請在「紀錄」查看結束代碼與 JSON。", "resultTitle": "指令結果 · 結束 {{code}}", "resultTitlePlain": "指令結果", "codeComment": "# 概念：register → heartbeat 迴圈 → 拉指令 → ack\n# 函式庫：ysk-server-core runOutboundAgent / agentCycle", "resultOuter": "外層：邊緣回報（結束代碼／錯誤輸出）。內層結果：", "deleteTitle": "刪除 {{id}}？", "deleteTitlePlain": "刪除 代理？", "deleteDesc": "相關指令紀錄一併移除。", "fact": { "kind": "類型", "name": "名稱", "status": "狀態", "unitActive": "服務", "unitName": "單元", "pathExists": "路徑存在", "installPath": "安裝路徑" }, "installBlocked": "無法在管理面板完成安裝", "registeredMsg": "已登記 {{id}}（僅控制面；節點需跑 外連 代理 並 心跳 先算上線）", "registerFailed": "登記失敗", "removedFleet": "已刪除機群登記", "enqueuedMsg": "已排隊指令 {{id}}…（節點 提取 後先執行）", "enqueueFailed": "下指令失敗", "loadCommandsFailed": "載入指令失敗", "probedMsg": "已探測 {{kind}}", "probeFailed": "探測失敗", "wroteUnitMsg": "已寫入 {{kind}} 服務設定", "writeFailed": "寫入失敗", "installedMsg": "已安裝 {{kind}}", "installIncomplete": "安裝未完成", "badgeDryRun": "計劃模式（預覽試行）", "badgeBlocked": "已阻擋", "labelStderr": "標準錯誤", "labelAckCli": "確認 + CLI JSON", "labelStdoutBody": "命令列 標準輸出內容", "resultOuterHint": "外層結果為命令列 --json 的標準輸出。", "noteAllowlist": "代理工具呼叫必須通過允許清單。", "noteRbacCap": "代理角色權限上限為低寫入。" }, "ai": { "status": { "completed": "已完成", "done": "已完成", "executed": "已執行", "failed": "失敗", "error": "錯誤", "rejected": "已拒絕", "pending": "待處理", "planned": "待審批", "approved": "已批准", "running": "執行中", "cancelled": "已取消" }, "activeCount": "{{count}} 進行中", "taskCount": "{{count}} 任務", "tasks": "任務", "active": "進行中", "tasksTab": "任務 ({{count}})", "playbooksTab": "劇本 ({{count}})", "queueTitle": "任務佇列", "queueSub": "點選查看計劃與步驟 · 終態不顯示多餘操作", "createTaskPlus": "+ 建立任務", "emptyTasks": "尚未有任務", "emptyTasksDesc": "用列表右上角建立任務，或從劇本庫一鍵產生", "browsePlaybooks": "瀏覽劇本", "noPrompt": "（無提示）", "stepsOf": "步驟 {{done}}/{{total}}", "noPlanSummary": "（無計劃摘要）", "pipelineAria": "任務階段", "phase": { "plan": "計劃", "approve": "審批", "run": "執行", "done": "完成" }, "approveRun": "批准並執行", "cancelTask": "取消任務", "terminalHint": "任務已終結，可建立新任務或執行劇本", "stepsTitle": "步驟（{{count}}）", "noSteps": "尚未產生步驟", "needsApproval": "需審批", "noApproval": "免審批", "reject": "拒絕", "selectTask": "選擇任務", "selectTaskDesc": "左側點一筆任務查看計劃與步驟", "playbooksTitle": "劇本庫", "playbooksSub": "預設操作組合 · 執行後會建立任務並切到任務分頁", "countItems": "{{count}} 個", "searchPh": "名稱 / 說明", "noPlaybooks": "無符合劇本", "noPlaybooksDesc": "改關鍵字或清空搜尋", "run": "執行", "createTitle": "建立 人工智能 任務", "createDesc": "產生計劃 ≠ 已執行。工具只會在 允許清單 內。", "generatePlan": "產生計劃", "promptLabel": "自然語言指令", "promptHint": "例如：檢查主機負載並回報；或 nginx 狀態", "promptPh": "描述想做的事…", "createHint": "下一步：在任務詳情按「批准並執行」，或拒絕個別步驟。" }, "apache": { "pageDesc": "Apache 站點（PHP 專案 + 獨立站）", "pillSites": "{{count}} 站點", "pillSitesSplit": "{{n}} 站點 · 殘留 {{leftover}}", "listTitle": "站點（{{count}}）", "emptyTitle": "未有站點", "createSite": "+ 建立站點", "createTitle": "建立站點", "editTitle": "編輯站點", "deleteTitle": "刪除站點？", "deleteDesc": "刪除此 Apache 站點？", "stopSites": "將有 {{n}} 個站點停止回應 HTTP。", "colServerName": "域名", "colSource": "來源", "colKind": "類型", "colTarget": "目標", "colStatus": "狀態", "filterSource": "來源篩選", "sourceAll": "全部", "sourceProject": "專案", "sourceStandalone": "獨立", "sourceArtifact": "磁碟", "sourceOrphan": "殘留", "orphanSite": "來源專案已不存在", "openProject": "開啟專案", "kindLabel": "類型", "kindProxy": "反代", "kindStatic": "靜態", "kindPhp": "PHP", "upstreamLabel": "上游", "rootLabel": "根目錄", "sslLabel": "SSL", "apply": "套用", "notInstalled": "未安裝 Apache", "globalSettings": "全域設定", "siteSettings": "站點設定", "saveApply": "儲存並套用", "settingsSaved": "已儲存", "setGzip": "Gzip 壓縮", "setShowVersion": "顯示版本", "setHttp2": "HTTP/2", "setBody": "Body 上限", "setKeepalive": "保活", "setAccessLog": "訪問日誌", "logOn": "開", "logOff": "關", "setForceHttps": "強制 HTTPS", "setHsts": "HSTS", "setIndexes": "目錄列表", "bodyInherit": "跟隨全域", "conflict": "域名衝突", "conflictHint": "同一域名有多個來源。請保留專案／獨立站列，並移除磁碟殘留。", "removeArtifact": "移除殘留", "removeArtifactTitle": "移除殘留 conf？", "removeArtifactDesc": "刪除此未認領的 Apache conf（面板 dataDir），並在可能時停用系統副本。不會刪除專案。", "removeArtifactHint": "刪除此磁碟殘留 conf，不會刪除專案。", "previewConf": "預覽 conf", "cleanupConflicts": "清理衝突殘留", "cleanupConflictsTitle": "清理全部衝突殘留？", "cleanupConflictsDesc": "移除所有與專案或獨立站 ServerName 衝突的磁碟 conf。專案列會保留。", "artifactRemovedOk": "已移除殘留 conf", "sslTerminatedUpstream": "由前置 Nginx 終止 TLS" }, "applyStatus": { "draft": "草稿", "written": "已寫入管理檔", "planned": "處理中", "applied": "已套用到系統", "failed": "失敗", "pendingExecute": "待系統權限", "uploaded": "已上傳", "issued": "已簽發", "missing": "檔案缺失" }, "audit": { "recent": "最近稽核", "lastN": "最近 {{n}} 筆", "actions": { "protection.change": "防護設定變更", "auth.locale": "介面語言變更", "auth.login": "登入", "auth.logout": "登出", "system.firewall.allow_port": "防火牆允許埠", "system.firewall.deny": "防火牆拒絕 IP", "system.firewall.apply": "防火牆套用", "project.deploy": "專案部署", "project.create": "建立專案", "project.delete": "刪除專案", "ssl.request": "申請 SSL", "ssl.upload": "上載 SSL", "system.firewall.enable": "防火牆啟用／停用", "system.firewall.delete_rule": "刪除防火牆規則", "system.firewall.delete_deny": "移除永久拒 IP", "db.adminer.apply": "資料庫管理專案", "project.goLive": "專案上線", "project.publish": "發佈 Nginx", "project.suspend": "暫停專案", "software.install": "安裝軟件", "software.update": "更新軟件", "backup.restore": "還原備份", "backup.run": "執行備份", "backup.delete": "刪除備份" } }, "backups": { "settingsSaved": "已儲存備份設定", "saveFailed": "儲存失敗", "downloadStarted": "已開始下載 {{name}}", "nothingToDo": "無事可做", "tarOkSideFail": "封存成功，但附屬步驟有問題", "success": "成功", "hasFailures": "有失敗", "notYet": "尚未", "enabled": "已啟用", "needPassword": "缺少密碼", "off": "關閉", "lastRun": "上次 {{label}}", "backupFiles": "備份檔", "projects": "專案", "lastAll": "上次全部", "latestFile": "最新備份檔", "remote": "遠端", "withBackups": "有備份專案", "ops": "操作", "remoteExclude": "遠端 / 排除", "about": "說明", "noBackups": "尚無備份", "noBackupsDesc": "執行「備份所有專案」或於專案詳情 備份", "goOps": "去操作", "projectShort": "專案", "download": "下載", "preview": "預覽", "restoreWeb": "還原網站檔案", "restoreFull": "完整還原", "restoreFullTitle": "用此封存覆寫專案檔案與資料庫 — 請輸入檔名確認", "restoreWebTitle": "只還原此封存的網站檔案", "previewTitle": "預覽還原，不寫入", "partialSkipped": "部分成功 — 有專案被略過", "delete": "刪除", "opsTitle": "操作", "opsHint": "0 個專案或全部略過 = 成功；真正有試過備而失敗先算失敗", "noProjects": "（沒有專案）", "successRatio": "· {{ok}}/{{total}} 成功", "summary": "摘要{{extra}}", "backupFailed": "備份失敗", "backupDone": "備份完成", "backupAll": "備份所有專案", "controlPlane": "備份控制平面", "controlPlaneDone": "控制平面備份完成", "cronCmd": "指令：ysk-server backup all --data-dir …", "cronHint": "schedule 帶 安裝=是 且 系統變更權限已開啟 時會寫入 主機 定時工作表；否則只寫 managed 檔", "dailyCronRegistered": "已登記每日 03:00 排程", "registerDailyCron": "登記每日排程（含安裝）", "resticNeedConfig": "請先在「遠端／排除」啟用 Restic 並設定 密碼", "resticFailed": "Restic 失敗", "resticDone": "Restic 增量完成", "resticOnly": "只跑 Restic 增量", "listSnapshots": "列出 Restic 快照", "lastAllDetail": "上次全部備份明細", "time": "時間", "result": "結果", "nothingZero": "無事可做（0 專案）", "notes": "備註", "status": "狀態", "skipped": "略過", "failed": "失敗", "lastNoProjects": "上次沒有專案需要備份。", "noPerProject": "沒有 per-project results。", "remoteSide": "遠端／Restic 副步驟", "step": "步驟", "remoteStep": "遠端", "restoreProjectId": "還原用 projectId（可空=全部 列表）", "needProjectOrTag": "請填 projectId 或 快照 需有 project: 標籤", "dryRunDone": "預覽試行完成（未寫入檔案）", "allSuccess": "全部成功", "failOrSkip": "有失敗／略過", "noteN": "備註 {{n}}", "enableRemote": "啟用遠端推送", "targetKind": "目標類型", "remoteKindAria": "遠端目標類型", "localPath": "本機路徑", "host": "主機", "port": "埠", "username": "用戶名", "password": "密碼", "passwordSshHint": "可留空，改用主機 遠端登入金鑰", "savedLeaveEmpty": "已儲存則留空", "s3Bucket": "儲存桶 路徑", "region": "區域", "endpointOptional": "端點（可選）", "localMirror": "本機鏡像路徑", "remotePath": "遠端路徑", "remotePathHint": "相對遠端用戶家目錄（或 SFTP chroot）。「.」即該家目錄。", "resticTitle": "Restic 增量備份", "resticDesc": "可選：系統路徑須有 Restic 指令。啟用後必須設定密碼（不會使用預設密碼）。", "enableRestic": "啟用 Restic", "repoPath": "儲存庫 路徑", "repoPassword": "儲存庫 密碼", "repoPassSaved": "已儲存；留空＝不改。啟用後必填。", "repoPassRequired": "啟用 Restic 時必填（不會使用預設密碼）", "savedPlaceholder": "已儲存（留空不改）", "required": "必填", "s3RepoUrl": "或 S3 儲存庫 URL", "excludeTitle": "排除規則", "excludeSub": "封存 排除路徑，每行一個 萬用字元", "excludeList": "排除清單", "saveAll": "儲存全部設定", "restoreFailed": "還原失敗", "previewDone": "預覽完成", "restoreDone": "還原完成", "previewQ": "預覽備份內容？", "restoreWebQ": "選擇性還原 (網站)？", "restoreFullQ": "完整還原？", "previewDesc": "只列出 {{name}} 內容，不會改檔。", "restoreWebDesc": "將 {{name}} 解壓到專案 主目錄（較保守）。", "restoreFullDesc": "完整 封存 還原 {{name}}，可能覆蓋現有檔案。", "restore": "還原", "cancel": "取消", "deleteFailed": "刪除失敗", "deleted": "已刪除", "deleteTitle": "移至回收區？", "deleteDesc": "將 {{name}} 移至回收區。7 日後永久刪除。", "tabTrash": "回收區", "trashTitle": "回收區（{{count}}）", "trashSub": "刪除的備份會在此保留 7 日，之後永久移除。", "trashEmpty": "回收區是空的", "trashEmptyDesc": "刪除的備份檔會在此保留 7 日。", "trashRestore": "還原", "trashPurge": "永久刪除", "trashEmptyAll": "清空回收區", "trashExpires": "到期 {{at}}", "trashPurgeTitle": "永久刪除此備份？", "trashPurgeDesc": "永久刪除 {{name}}。無法復原。", "trashEmptyTitle": "清空回收區？", "trashEmptyDescConfirm": "永久刪除 {{count}} 個備份檔。請輸入件數確認。", "trashRestored": "已從回收區還原", "trashPurged": "已永久刪除", "trashedOk": "已移至回收區", "resticSafeTitle": "Restic 還原到安全目錄？", "resticSafeDesc": "還原 {{snapshot}} 到專案 {{project}} 的 .Restic-還原-* 目錄", "resticRestoreDone": "Restic 還原完成", "overwriteTitle": "危險：覆寫 主目錄", "overwriteDesc": "將覆寫專案 {{project}} 的 主目錄。輸入 OVERWRITE 確認。", "confirmString": "確認字串", "overwriteHome": "覆寫 主目錄", "resticOverwriteDone": "Restic 覆寫 主目錄 完成", "opsResult": "操作結果", "filesTitle": "備份檔案 ({{count}})", "filesSub": "備份檔存在面板資料目錄。下載需登入；還原可先預覽，或只還原網站，或完整還原。", "backupAllBtn": "全部備份", "yes": "是", "no": "否", "safeDir": "安全目錄", "remotePushTitle": "遠端推送目標", "remotePushSub": "本地 封存 成功後可推送到 SFTP、本機路徑或 S3", "accessKey": "存取金鑰", "secretKey": "密鑰", "overwriteConfirmHint": "輸入 OVERWRITE 確認覆寫", "testRemote": "測試目的地", "testRemoteHint": "會連線遠端主機並寫入測試檔，並非只讀探測。", "testRemoteDone": "遠端探測完成", "testRemoteFailed": "遠端探測失敗", "resticRepoPh": "面板資料目錄／restic 庫", "testDisabledHint": "請先開啟遠端推送才可測試。", "identityId": "出站 SSH 身份", "identityHint": "優先使用。與 /security SSH 同一金鑰庫。密碼需 sshpass。", "identityNone": "無 — 用密碼或本機預設金鑰", "skippedListHint": "以下專案被略過：", "skippedPendingOs": "已略過 — 待建立系統用戶（主目錄不存在）", "goLogs": "開啟日誌", "goAbout": "備份說明", "previewListingTitle": "封存內容", "restoreNamedDesc": "將 {{name}} 還原到專案 {{project}}。", "overwriteNamedDesc": "用快照 {{snapshot}} 覆寫專案 {{project}} 的檔案。", "resticSafeNamed": "將專案 {{project}} 的快照 {{snapshot}} 還原到安全目錄。" }, "btTracker": { "title": "BT追蹤器", "sub": "檔案分享 BitTorrent／WebTorrent", "pageDesc": "檔案分享 BitTorrent／WebTorrent", "status": "狀態", "running": "運行中", "stopped": "已停止", "installed": "已安裝", "start": "啟動", "stop": "停止", "stopTitle": "停止 Tracker — 會中斷做種與下載", "stopDesc": "運行中的 Torrent 會停止 announce。對等節點會斷線，直至再次啟動。", "fillPublicHost": "使用 {{host}}", "fillPublicHostTitle": "把目前面板主機名填入公開 announce 主機", "refresh": "重新整理", "settings": "設定", "httpPort": "HTTP／WS 埠", "udpPort": "UDP 埠", "listenHost": "監聽", "listenHostHint": "0.0.0.0 會聽全部位址。若不必對外，請改綁 127.0.0.1。", "listenAllWarn": "Tracker 正綁定全部位址。防火牆關閉時等同對公網開放。可改綁 127.0.0.1，或在防火牆限制該埠。", "bindLoopback": "只綁 127.0.0.1", "bindAll": "0.0.0.0（全部）", "wsEnabled": "WebSocket", "wsEnabledHint": "", "autostart": "開機自啟", "autostartHint": "", "publicAnnounceHost": "公開主機", "publicAnnounceHostHint": "", "maxSeeds": "做種上限", "seederPorts": "Peer 埠", "seederPortMin": "Peer 埠起始", "seederPortMax": "Peer 埠結束", "seederPortsHint": "本機做種使用的埠範圍（含上下限，常見 6881–6889）。", "saveSettings": "儲存", "applyHint": "", "torrents": "Torrent", "torrentsEmpty": "暫無 Torrent", "torrentsEmptyHint": "加入 .torrent，或於「檔案」建立 BT 分享", "torrentsDesc": "", "colName": "名稱", "colHash": "哈希值", "colSeeds": "種子", "colLeechers": "下載", "colStatus": "狀態", "announceUrls": "宣告", "announceDesc": "", "copy": "複製", "copied": "已複製", "statsTorrents": "Torrent", "statsLibrary": "資料庫", "statsLibraryHint": "面板資料庫／檔案分享的 Torrent 列", "statsTrackerLeftover": "Tracker 雜湊不在資料庫", "statsTrackerLeftoverHint": "本機 Tracker 有 announce、但不在 Torrent 資料庫列的雜湊。清單見 Tracker 分頁。", "leftoverHashesTitle": "Tracker 殘留雜湊", "publicHostMissingLive": "Tracker 已在聽，但未設定公開 announce 主機。外網對等節點找不到此種子。", "leftoverHashesHint": "唯讀。這些 announce 不是資料庫或分享列。", "statsPeers": "同行", "statsAnnounces": "Announce", "statsAnnouncesHint": "Tracker 行程收到的 announce 次數", "statsJobs": "任務", "openShares": "分享", "needExecute": "需要 YSK_EXECUTE 綁定埠", "guideTitle": "說明", "guideBody": "BT 分享會產生 .torrent 並經此 Tracker 交換 peers。", "restoreSeeds": "重新做種", "restoreSeedsHint": "重啟本機做種", "restoredCount": "已重新做種 {{seeded}}／{{attempted}} 個 Torrent", "portInvalid": "請輸入 1 至 65535 的埠號。", "extraTrackerRequired": "請填寫公佈網址。", "stopPort": "Tracker 埠 {{port}} 將停止監聽。", "stopPid": "行程 PID {{pid}} 將結束。", "swarmLeftoverUnlisted": "另有 {{count}} 個殘留 announce 未列雜湊。", "bundledNote": "", "stackTitle": "軟件", "jobs": "任務", "jobsEmpty": "無任務", "jobsEmptyHint": "", "jobsDesc": "", "colJob": "任務", "colShare": "分享", "colJobStatus": "狀態", "colEnqueued": "時間", "refreshJobs": "重新整理", "tabOverview": "概覽", "tabTorrents": "Torrent", "tabJobs": "任務", "tabSettings": "設定", "tabAbout": "關於", "heroRunning": "運行中", "heroStopped": "已停止", "heroRunningSub": "", "heroStoppedSub": "", "live": "即時", "liveOff": "閒置", "quickStart": "步驟", "quickStartDesc": "", "step1Title": "公開主機", "step1Hint": "", "step2Title": "啟動", "step2Hint": "", "step3Title": "BT 分享", "step3Hint": "", "stepDone": "完成", "stepTodo": "待辦", "networkCard": "網絡", "networkCardDesc": "", "seederCard": "做種", "seederCardDesc": "", "lifecycleCard": "生命週期", "lifecycleCardDesc": "", "pid": "PID", "port": "埠", "announceHost": "主機", "goSettings": "設定", "searchTorrents": "搜尋…", "filterAll": "全部", "filterSeeding": "做種", "filterOther": "其他", "noMatch": "無符合項目", "seedStatusSeeding": "做種中", "seedStatusPending": "處理中", "seedStatusError": "錯誤", "seedStatusStopped": "已停止", "seedStatusNone": "無", "notesTitle": "備註", "exposureTitle": "網絡存取", "protoHttp": "HTTP", "protoWs": "WS", "protoUdp": "UDP協定", "saveOk": "已儲存", "saveOkRestart": "已儲存 — 請重啟 Tracker 套用埠", "startedOk": "已啟動", "stoppedOk": "已停止", "restoredOk": "重新做種完成", "httpPortHint": "", "udpPortHint": "", "udpPortOff": "關閉", "udpPortSameHttp": "同 HTTP（{{port}}）", "udpPortClassic": "6969", "portSuggest8000": "8000", "announceHostUnset": "未設定", "tabTrackers": "Tracker", "addTorrent": "加入 Torrent", "addTorrentTitle": "加入 Torrent", "addTorrentHint": "上傳 .torrent 或貼上 magnet。讀取後才選擇儲存位置。檔案未齊會用 WebTorrent 下載，齊了就做種。", "dropTorrent": "將 .torrent 拖放到此處", "chooseFile": "或選擇檔案", "magnetLabel": "磁鐵連結", "magnetPlaceholder": "magnet:?xt=urn:btih:…", "inspect": "讀取", "extraTrackersPreview": "將額外向 {{n}} 個常用 Tracker announce", "saveLocation": "儲存位置", "saveRootPublic": "公用檔案", "newFolder": "新資料夾", "destPreview": "將寫入", "startDownload": "開始下載", "filterDownloading": "下載中", "filterPaused": "已暫停", "filterError": "錯誤", "emptyDrop": "將 .torrent 拖放到此處，或選擇檔案", "emptyHint": "加入 .torrent 或 magnet。讀取後才選擇儲存位置；檔案已齊就直接做種。引擎是 WebTorrent。", "pause": "暫停", "resume": "繼續", "openFolder": "開啟資料夾", "remove": "移除", "removeKeep": "移除並保留檔案", "removeDelete": "移除並刪除檔案", "removeConfirm": "要從資料庫移除此 Torrent？", "kindShare": "分享", "filesInTorrent": "個檔案", "extraTrackersDesc": "這裏是額外 announce。資料庫下載／做種與檔案 BT 分享都會一併通知這些 Tracker。不會取代 .torrent 原有清單，亦不會令本機 Tracker 對外開放。", "extraTrackersEmpty": "未有常用 Tracker。加入 http(s)／udp／ws(s) announce URL 才可靠外站尋找 peers。", "extraTrackerAdd": "加入", "extraTrackerUrl": "公佈網址", "extraTrackerApply": "套用到現有做種", "extraTrackerApplyOk": "已套用常用 Tracker", "extraEnabled": "啟用", "extraTrackerBad": "URL 必須以 http://、https://、udp://、ws:// 或 wss:// 開頭", "extraTrackerDup": "清單已有此 URL", "extraTrackerLimit": "最多 32 個常用 Tracker", "addOk": "已加入資料庫", "savedTo": "儲存", "folderEmpty": "沒有子資料夾", "needTorrentFile": "請選擇 .torrent 檔", "torrentTooBig": ".torrent 大於 8 MiB", "seedStatusDownloading": "下載中", "seedStatusChecking": "檢查中", "seedStatusPaused": "已暫停", "seedStatusQueued": "排隊中", "swarmLeftover": "Tracker 紀錄另有 {{count}} 個 announce（不是資料庫 Torrent 列；來源不同）", "addSourceSection": "來源", "addSourceFile": "檔案", "addSourceMagnet": "磁鐵連結", "previewSection": "預覽", "saveRoot": "根目錄", "clearFile": "清除檔案", "extraTrackersTitle": "額外 announce", "extraTrackersEmptyTitle": "尚未加入額外 announce", "extraEnabledCount": "{{count}} 條已啟用", "extraApplyHint": "至少啟用一條才可套用到現有做種", "destMode": "此資料夾的用法", "seedExisting": "使用現有檔案做種", "downloadNewFolder": "下載到新資料夾", "destFileConflict": "此處已有檔案 {{name}}。請另選資料夾；若檔案就是此 Torrent 的內容，請選「使用現有檔案做種」。", "waitingPeers": "正在等待 peers。若檔案已在此主機，請重新加入並選「使用現有檔案做種」。" }, "catalog": { "sw": { "vsftpd": "vsftpd（FTPS）", "db_util": "db-util（FTP 用戶資料庫）", "nginx": "Nginx", "certbot": "Certbot (Let's Encrypt)", "mysql_client": "MySQL／MariaDB 客戶端", "mysql_server": "MySQL 伺服器", "mariadb_server": "MariaDB 伺服器", "postgresql_client": "PostgreSQL 客戶端", "postgresql": "PostgreSQL 伺服器", "redis_tools": "Redis 客戶端", "redis_server": "Redis 伺服器", "ufw": "UFW 防火牆", "fail2ban": "fail2ban", "postfix": "Postfix", "dovecot": "Dovecot", "opendkim": "OpenDKIM", "pdns_server": "PowerDNS", "git": "git", "node": "Node.js", "php": "PHP", "python": "Python", "go": "Go", "rust": "Rust", "chromium": "Chromium / Chrome" }, "php": { "session": "工作階段", "opcache": "OPcache" } }, "cdn": { "fromProjectOk": "已從專案建立 CDN 站點 — 請套用 edges / DNS", "fromProjectUpdated": "已更新專案綁定的 CDN 站點", "fromProjectFailed": "from-project 失敗", "nodeUpdated": "節點已更新", "nodeCreated": "節點已建立", "saveFailed": "儲存失敗", "geoMapInvalid": "geoMap JSON 無效，例：{\"hkg\":[\"node-識別碼\"]}", "siteUpdated": "站點已更新", "siteCreated": "站點已建立", "probeOnline": "探活成功（online）", "probeOffline": "探活失敗（offline）", "probeFailed": "探活失敗", "batchProbeOk": "全部節點探活完成", "batchProbePartial": "部分／全部節點不健康", "batchProbeFailed": "批次探活失敗", "drainingSet": "已設為 draining", "drainCleared": "已解除 drain", "confirmDeleteNode": "確定刪除此 CDN 節點？", "nodeDeleted": "已刪除節點", "deleteFailed": "刪除失敗", "confirmDeleteSite": "確定刪除此 CDN 站點？", "siteDeleted": "已刪除站點", "blocked": "已封鎖（需系統變更權限）", "previewRender": "預覽渲染（{{status}}）hash={{hash}}", "fanoutDone": "Fan-out 完成（{{status}}）", "purgeDone": "清除 完成（{{status}}）", "dnsSyncDone": "DNS 同步完成（{{status}}）", "sslDone": "SSL 操作完成（{{status}}）", "confWritten": "已寫入 設定檔（{{status}}）", "partialFail": "未全部成功（{{status}}）— 見 notes", "statNodes": "節點", "hitNoStats": "尚無邊緣統計", "loopbackOriginBlocked": "不會把回環 origin {{url}} 寫到遠端邊緣。請先改成可達的 origin。", "applyFailedHint": "套用失敗", "applyFailedNoNote": "沒有存下失敗原因。請再套用一次以記錄錯誤。", "applyStatus": { "draft": "草稿", "planned": "已計劃", "applying": "套用中", "applied": "已套用", "failed": "失敗", "partial": "部分成功" }, "statSites": "站點", "statSitesCount": "站點 {{n}}", "cacheMethod": { "none": "無法估計", "access_log": "存取日誌", "cache_dir": "快取目錄", "log_format": "需設定日誌格式" }, "geoMapLabel": "地區對照（JSON）", "statApplyFailed": "套用失敗", "pillNodesSites": "節點 {{n}} · 站點 {{s}}", "statOnline": "線上", "statOnlineOf": "線上 {{n}}/{{total}}", "colRegion": "區域", "statDraining": "排空中 {{n}}", "statHit": "命中率", "localTest": "本機／測試", "hitUnknown": "未知", "lastHealthHint": "上次探活 {{at}} · {{ok}}", "lastHealthNever": "尚未探活 — 請按「探活」", "lastHealthFail": "探活失敗", "healthLoopNeedSites": "請先新增站點", "nodeStatus": { "online": "在線", "offline": "離線", "draining": "排空中", "unknown": "未知" }, "recentNotes": "最近記錄", "previewOnlyNote": "本次僅預覽，未寫入邊緣。", "statByRegion": "區域：", "statByApply": "套用狀態：", "col": { "origin": "來源站", "edges": "邊緣數", "apply": "套用狀態", "dns": "DNS", "edgesOnline": "邊緣 線上／已套用", "dnsRr": "CDN DNS 記錄" }, "mode": { "origin_pull": "回源拉取", "reverse_proxy": "反向代理", "static_edge": "靜態邊緣" }, "dnsStrategy": { "multi_a": "多 A 記錄", "cname": "CNAME", "geo": "地區" }, "edgesOnlineApplied": "線上 {{online}}/{{total}} · 已套用 {{applied}}", "hitMiss": "命中 {{hits}}／未命中 {{misses}}", "cacheBytes": "快取約 {{n}} B", "hitRateUnknown": "找不到含快取狀態的存取日誌，也沒有快取目錄，因此無法估算命中率。", "edgeConfPreview": "Nginx 邊緣 設定檔 預覽", "tabs": { "nodes": "節點", "sites": "站點", "dashboard": "儀表", "about": "說明" }, "nodesTitle": "CDN 節點（{{count}}）", "nodesDesc": "登記控制面／來源站／邊緣／DNS。探活會更新狀態。", "offlineHint": "離線／探活失敗。若是測試殘留，可刪除此節點。", "colName": "名稱", "colRole": "角色", "colStatus": "狀態", "clearDrain": "解除 drain", "drain": "排空流量", "drainTitle": "停止向此邊緣派新流量", "drainDesc": "Drain「{{name}}」？現有連線會待完結。", "drainLastTitle": "這是最後一個邊緣 — Drain 後所有站點沒有邊緣可用", "drainLastDesc": "「{{name}}」是唯一邊緣。Drain 後所有站點沒有邊緣。", "clearDrainTitle": "恢復此邊緣接收新流量", "clearDrainDesc": "解除「{{name}}」的 drain？", "deleteNodeTitle": "刪除此 CDN 邊緣", "deleteLastNodeTitle": "刪除最後一個邊緣 — 所有站點將沒有邊緣", "purge": "清除", "previewTitle": "預覽 nginx 設定（不寫檔）", "writeConfTitle": "寫入邊緣 nginx 設定檔", "applyEdgesTitle": "套用此站點到邊緣（會寫 nginx）", "purgeTitle": "清除邊緣快取", "dnsSyncTitle": "寫入 CDN DNS 記錄", "probeDnsTitle": "探測邊緣與 DNS（唯讀）", "distSslTitle": "把 TLS 材料複製到邊緣", "leIssueTitle": "申請 Let’s Encrypt 憑證並分發", "deleteSiteTitle": "刪除此 CDN 站點", "siteOpConfirmGeneric": "對「{{name}}」執行此操作？", "siteOpConfirmDesc": "站點「{{name}}」· {{action}}。可能改動 nginx、DNS 或憑證。", "siteOpConfirm": { "apply": "套用此站點到邊緣？", "render": "寫入此站點的 nginx 設定？", "purge": "清除此站點快取？", "dns-sync": "同步此站點 DNS？", "dist": "分發 TLS 到邊緣？", "issue": "申請 Let’s Encrypt 並分發？" }, "emptyNodesTitle": "尚未登記 CDN 節點", "emptyNodesDesc": "請使用右上角「+ 新增節點」登記 邊緣，再建立站點。", "sitesTitle": "CDN 站點（{{count}}）", "sitesDesc": "域名 + origin + edges + cache + multi-A DNS。套用 edges / DNS 同步 / 清除。", "healthLoopOk": "全部站點健康迴圈完成", "healthLoopPartial": "健康迴圈部分失敗", "healthLoopFailed": "health-loop 失敗", "colDomain": "域名", "colMode": "模式", "emptySitesTitle": "尚未有 CDN 站點", "emptySitesDesc": "請用表格右上角「+ 新增站點」建立站點。", "emptySitesNoEdge": "尚無 邊緣：先到「節點」分頁，用表格右上角「+ 新增節點」登記，再回來建立站點。", "dashboardTitle": "CDN 儀表", "updatedAt": "更新於 {{at}}", "dashboardEmpty": "尚未載入儀表", "siteStatus": "站點狀態", "cacheHitEstimate": "快取命中率粗估", "dashboardNotes": "儀表 notes", "editNode": "編輯 CDN 節點", "addNode": "新增 CDN 節點", "nodeAddrHint": "至少填 IPv4 / IPv6 / healthUrl / baseUrl 其中一項", "sshHostHint": "可空＝用 IPv4；127.0.0.1＝本機 local 套用", "sshHostPlaceholder": "留空用 public IPv4", "sshUser": "遠端登入 用戶", "fleetHint": "僅填 機群、無 遠端登入 時：fan-out 會入佇列給 代理（ysk-server 代理 loop），已排隊 ≠ 已 重新載入", "fleetPlaceholder": "Agents 頁面 工作階段 UUID", "editSite": "編輯 CDN 站點", "addSite": "新增 CDN 站點", "originHint": "origin 先支援 URL；project 綁定後續強化", "commaSeparated": "逗號分隔", "originUrl": "邊緣 回源地址", "edgeNodes": "邊緣 節點", "cache": "快取", "dnsPolicy": "DNS 策略", "dnsPolicyHint": "multi_a=多 IP；failover=只寫最健康一顆", "zoneOptional": "可空＝依域名自動匹配 zone", "sslMode": "SSL 模式", "sslModeHint": "上載＝SSL 頁已有憑證；le_http01＝邊緣 ACME", "leEmailOptional": "LE 電郵（可選）", "leEmailHint": "簽發時預填", "shieldHint": "非 shield 邊緣 經此節點回源", "geoMapHint": "strategy=geo 時用，例 {\"hkg\":[\"id1\"],\"nrt\":[\"id2\"]}", "geoSubdomain": "geo 子域名", "addNodeBtn": "+ 新增節點", "addSiteBtn": "+ 新增站點", "probeAll": "全部探活", "healthLoop": "健康迴圈", "setDraining": "設 draining", "fromProjectUpdatedAlt": "已更新專案綁定的 CDN 站點", "refresh": "重新整理", "closePreview": "關閉預覽", "probe": "探活", "preview": "預覽", "writeConf": "寫入 設定檔", "applyEdges": "套用 edges", "dnsSync": "DNS 同步", "probeDns": "探活+DNS", "distSsl": "分發 SSL", "leIssue": "LE 簽發", "reaggregate": "重新彙總", "createEdgeFirst": "請先建立 邊緣 節點", "enableProxyCache": "啟用 proxy_cache", "autoMatch": "（自動匹配）", "none": "（無）", "writeRegionDns": "寫入 region 子域名 A/AAAA（如 hkg）", "workflowHint": "流程：寫入 設定檔 → 套用 edges → 探活+DNS → SSL。專案一鍵：/cdn?fromProject=專案識別碼", "healthLoopAll": "全站健康迴圈", "deleteNodeDesc": "將刪除 CDN 節點「{{name}}」。", "deleteSiteDesc": "將刪除 CDN 站點「{{name}}」。", "deleteSiteC1": "站點政策與邊緣關聯", "deleteSiteC2": "已下發的 nginx 設定需另行清理或重新套用", "statOffline": "離線 {{n}}", "statHitRate": "命中率 {{v}}" }, "cli": { "unknownCommand": "未知命令：{{command}}\n執行 `{{cli}} help`", "usagePrefix": "用法：", "security": { "help": "用法：ysk-伺服器安全狀態\n ysk-server 安全會話清單|撤銷|撤銷-其他 [--user U]\n ysk-server 安全性 api 金鑰清單|建立|刪除 …", "sessionsHelp": "用法：ysk-server 安全會話清單 [--user U]\n ysk-server 安全會話撤銷 --id PREFIX [--user U]\n ysk-伺服器安全會話撤銷其他 [--user U] [--keep-token T]", "apiKeysHelp": "用法：ysk-server 安全 api 金鑰列表\n ysk-server security api-keys create --name N [--user U] [--scope full|read]\n ysk-伺服器安全 API 金鑰刪除 --id KEY_ID", "noUser": "找不到用戶。請先建立管理員，或傳入 --user <名稱或識別碼>。", "tokenOnce": "權杖 只顯示一次 — 請妥善保存", "sessionRevokeUsage": "用法：ysk-server 安全會話撤銷 --id [--user U]", "apiKeyDeleteUsage": "用法：ysk-server security api-keys delete --id KEY_ID" }, "help": { "blurb": "控制平面 命令列 — 人工智能 代理 請優先用 --json。\n文件：docs/代理/README.md · docs/cli/reference.md · docs/代理/commands.json", "main": "YSK Server 命令列。指令與旗標一律為英文；--locale 只翻譯說明文字。\n\n{{product}} ({{cli}}) v{{version}}\n\nControl plane CLI — prefer --json for AI agents.\nDocs: docs/agent/README.md · docs/cli/reference.md · docs/agent/commands.json\n\nUsage:\n {{cli}} [options]\n\nCommands:\n setup Init dataDir + admin\n update Self-update check/apply\n serve HTTP API + Web UI\n system unit-install Install ysk-server.service [--enable]\n stack plans|bundles|status|install|uninstall\n tools List tools; tools run --tool [--dry-run]\n ask NL → AI plan [--execute]\n projects list|get|create|deploy|stop|health|backup|template\n users list|create|totp\n packages list\n rbac list|show\n audit list\n backup all|list|status|restore|delete|schedule|control-plane|settings|restic\n templates App templates\n hosting nginx|dns|db|firewall helpers\n dns zone|zones|lookup|ddns\n logs sources|query|journal|overview\n host overview|metrics (read-only)\n nginx status|list|test|sync\n ssl list|get (certificates)\n db-cluster list|get|create|plan (HA plan-first)\n ssh-key list|create|import|public|export|install|delete (SSH identity vault)\n ssh-2fa list|enroll|confirm|install|pam|retire (SSH login TOTP ≠ panel 2FA)\n services Host service matrix (systemctl probe)\n defense | protection status|ban|unban|whitelist\n security status|sessions|api-keys (2FA flags · session revoke · API keys)\n cdn nodes|sites|render|apply|purge|probe|dashboard|health-loop|from-project\n agents runtimes|fleet list|commands|register (panel + edge)\n agent run Outbound fleet poller (experimental)\n store status|export|import|migrate (json|sqlite|postgres document backends)\n files list|read|write|mkdir|rm|stat|rename|copy|move|chmod|trash|shares (sandbox)\n cron list|create|update|delete|enable|disable|run|install|status|host\n email domains|mailboxes|deliverability|bootstrap|dns (panel parity)\n health Local mode snapshot or --url http://host:port/health\n notifications list\n readiness | doctor Production readiness (honest)\n migrate inventory|host|post|status|resume|orphan-homes (full host migrate)\n vpn WireGuard / OpenVPN\n vnc accounts|clients|share\n apache sites|settings\n network ifaces|exposure|real-ip\n real-ip CDN Real IP\n updates inventory|apply\n software list|install|uninstall\n db MySQL / MariaDB / PostgreSQL\n redis status|keys|get|set\n ftp accounts|status\n runtimes list|install\n bt-tracker status|settings\n validators list|chains|disk|get|checklist (Beta)\n docker status|ps|images|compose|prune (engine)\n version | help\n\nGlobal:\n --json JSON stdout (AI)\n --data-dir PATH also --data-dir=PATH or YSK_DATA_DIR\n --config PATH\n --locale CODE CLI language (default en). Also YSK_LOCALE.\n Codes: en zh-HK zh-CN ja ko hi es ar fr bn pt id ur\n --limit N --offset N Slice large JSON lists (software / updates / host metrics / rbac)\n --help | --version\n\nExit: 0 ok · 1 error · 2 validation · 3 blocked · 4 not found · 5 host error\n\nSafety:\n Dangerous ops default to dry-run (plan only).\n Pass --execute (alias --apply) + env YSK_EXECUTE=1 to mutate host.\n Command names and flags are always English. --locale only translates messages.\n\nExamples:\n {{cli}} readiness --json\n {{cli}} host --json\n {{cli}} nginx status --json\n {{cli}} ssl list --json\n {{cli}} projects get --id UUID --json\n {{cli}} defense ban --ip 1.2.3.4 --json # dry-run plan\n {{cli}} projects list --json\n {{cli}} --locale=zh-HK help\n {{cli}} logs query --source journal: --lines 100 --json\n {{cli}} tools --json" }, "usage": { "tools": { "run": { "--tool": { "name": { "--arg": { "cd327c": "用法： ysk-server tools run --tool <名稱> [--arg 金鑰=val] [--預覽試行]" } } } } }, "email": { "domains": { "list": { "create": { "get": { "b94a62": "用法： ysk-server 電郵 domains 列表|建立|get …" } } }, "create": { "--domain": { "example": { "bd4036": "用法： ysk-server 電郵 domains 建立 --網域 example.com --ip A.B.C.D" } } } }, "mailboxes": { "list": { "create": { "42b26c": "用法： ysk-server 電郵 mailboxes 列表|建立 …" } }, "create": { "--domain": { "example": { "7227f3": "用法： ysk-server 電郵 mailboxes 建立 --網域 example.com --local 用戶 [--密碼 P]" } } } }, "dns": { "--domain": { "example": { "com": { "26b806": "用法： ysk-server 電郵 dns --網域 example.com" } } } }, "sub": { "--data-dir": { "path": { "--json": { "73dad0": "用法： ysk-server 電郵 [--data-dir 路徑] [--json]\n domains 列表|建立|get [--q TEXT]\n 建立 --網域 example.com --ip A.B.C.D\n get --網域 example.com | --識別碼 UUID\n mailboxes 列表|建立 [--網域 D | --識別碼 domainId]\n 建立 --網域 D --local 用戶 [--密碼 P]\n deliverability --網域 D | --識別碼 UUID\n deliverability-overview\n 初始化 --網域 D --ip A.B.C.D [--安裝]\n dns --網域 D | --識別碼 UUID # DNS bundle for 面板\nAlso: hosting 電郵-套用|電郵-mailbox|電郵-deliverability (aliases)" } } } }, "deliverability": { "--domain": { "example": { "com": { "b0dff0": "用法： ysk-server 電郵 deliverability --網域 example.com" } } } }, "bootstrap": { "--domain": { "example": { "com": { "affc8d": "用法： ysk-server 電郵 初始化 --網域 example.com --ip 1.2.3.4 [--安裝]" } } } } }, "cron": { "delete": { "--id": { "job": { "id": { "f6aafe": "用法： ysk-server 定時工作 delete --識別碼 JOB_ID" } } } }, "sub": { "--id": { "job": { "id": { "99cfdf": "用法： ysk-server 定時工作 {{sub}} --識別碼 JOB_ID" } } }, "--data-dir": { "path": { "--json": { "0349e6": "用法： ysk-server cron [--data-dir PATH] [--json]\n list [--project-id ID] [--q TEXT]\n create --schedule \"0 3 * * *\" --command CMD [--project-id ID] [--user USER]\n update --id JOB_ID [--schedule S] [--command CMD] [--user USER] [--project-id ID] [--enable|--disable]\n delete --id JOB_ID\n enable|disable --id JOB_ID\n run --id JOB_ID # run-now (needs YSK_EXECUTE=1)\n install # load managed crontab (needs EXECUTE)\n status # probe managed file vs host crontab\n host [list] [--user USER] [--jobs-only]\n host edit --user USER --old-schedule S --old-command C --schedule S --command C --execute\n host disable|enable|delete|adopt --user USER --old-schedule S --old-command C --execute\n host run --user USER --command C --execute\n誠實：未設定 YSK_EXECUTE=1 時，install 與 host 寫入會封鎖。\n" } } } }, "run": { "--id": { "job": { "id": { "a0a97f": "用法： ysk-server 定時工作 run --識別碼 JOB_ID" } } } }, "create": { "--schedule": { "0": { "3": { "9a8328": "用法： ysk-server 定時工作 建立 --schedule \"0 3 * * *\" --command CMD [--project-識別碼 識別碼] [--用戶 用戶]" } } } } }, "files": { "stat": { "--path": { "rel": { "17c8f2": "用法： ysk-server 檔案 stat --路徑 REL" } } }, "read": { "--path": { "rel": { "e35f8d": "用法： ysk-server 檔案 read --路徑 REL" } } }, "mkdir": { "--path": { "rel": { "ae0438": "用法： ysk-server 檔案 mkdir --路徑 REL" } } }, "rm": { "--path": { "rel": { "--permanent": { "fe2051": "用法： ysk-server 檔案 rm --路徑 REL [--permanent]" } } } }, "rename": { "--from": { "rel": { "--to": { "35a260": "用法： ysk-server 檔案 rename --from REL --to REL" } } } }, "copy": { "--from": { "rel": { "--to": { "5337f4": "用法： ysk-server 檔案 copy --from REL --to REL" } } } }, "move": { "--from": { "rel": { "--to": { "75cf5d": "用法： ysk-server 檔案 move --from REL --to REL" } } } }, "chmod": { "--path": { "rel": { "--mode": { "39f983": "用法： ysk-server 檔案 chmod --路徑 REL --模式 644" } } } }, "trash": { "restore": { "--id": { "trash": { "c89ce9": "用法： ysk-server 檔案 trash 還原 --識別碼 TRASH_ID" } } }, "list": { "restore": { "purge": { "ef063d": "用法： ysk-server 檔案 trash 列表|還原|清除" } } } }, "shares": { "list": { "ac342c": "用法： ysk-server 檔案 shares 列表" } }, "webdav": { "status": { "token": { "disable": { "f8e94b": "用法： ysk-server 檔案 webdav 狀態|權杖|停用" } } } }, "sub": { "--root": { "public": { "project": { "42ebd4": "用法： ysk-server 檔案 [--管理員 public|project:識別碼] [--data-dir 路徑] [--json]\n 列表 [--路徑 DIR] [--q TEXT] [--sort 名稱|size|mtime] [--order asc|desc]\n stat --路徑 REL\n read --路徑 REL\n write --路徑 REL --content TEXT | --檔案 LOCAL\n mkdir --路徑 REL\n rm --路徑 REL [--permanent]\n rename --from REL --to REL\n copy --from REL --to REL\n move --from REL --to REL\n chmod --路徑 REL --模式 644\n trash 列表|還原|清除 [--識別碼 TRASH_ID]\n shares 列表\n favorites 列表\n 上載 --dir REL --檔案 LOCAL [--檔案 LOCAL2…]\n webdav 狀態|權杖|停用\nSandbox: only public 檔案 管理員 or project 主目錄 (路徑-constrained)." } } } }, "write": { "--path": { "rel": { "--content": { "0addb1": "用法： ysk-server 檔案 write --路徑 REL --content TEXT | --檔案 LOCAL" } } } }, "upload": { "--dir": { "rel": { "--file": { "f8c3bf": "用法： ysk-server 檔案 上載 --dir REL --檔案 LOCAL [--檔案 LOCAL2…]" } } } } }, "store": { "import": { "--in": { "file": { "json": { "5b6fdd": "用法： ysk-server store import --in FILE.json" } } } }, "sub": { "--data-dir": { "path": { "--json": { "d580e4": "用法： ysk-server store [--data-dir PATH] [--json]\n status Show backend kind + counts\n export --out FILE.json Dump document snapshot\n import --in FILE.json Overwrite snapshot from file\n migrate --to sqlite|json [--out PATH]\n Copy current store into another backend file\nEnv: YSK_STORE=json|sqlite|postgres YSK_DATABASE_URL=postgres://…\nHonesty: document-blob backends (not full relational schema yet)." } } } }, "migrate": { "--to": { "json": { "sqlite": { "1c52a3": "用法： ysk-server store migrate --to json|sqlite [--out PATH]\n (postgres: export JSON then import under YSK_DATABASE_URL)" } } } } }, "cdn": { "nodes": { "delete": { "--id": { "node": { "0c6a1e": "用法： ysk-server cdn nodes delete --識別碼 NODE_ID" } } }, "drain": { "--id": { "node": { "a8aa81": "用法： ysk-server cdn nodes drain --識別碼 NODE_ID [--off]" } } }, "list": { "upsert": { "delete": { "52549e": "用法： ysk-server cdn nodes 列表|upsert|delete|探測|drain …" } } }, "upsert": { "--name": { "name": { "8f6f39": "用法： ysk-server cdn nodes upsert --名稱 名稱 [--識別碼 識別碼] [--base-url U] [--機群-代理-識別碼 S] [--ssh-主機 H] [--region R]" } } } }, "sites": { "get": { "--id": { "site": { "3c3c35": "用法： ysk-server cdn sites get --識別碼 SITE_ID" } } }, "delete": { "--id": { "site": { "51ef8f": "用法： ysk-server cdn sites delete --識別碼 SITE_ID" } } }, "list": { "get": { "upsert": { "609da6": "用法： ysk-server cdn sites 列表|get|upsert|delete …" } } }, "upsert": { "--name": { "n": { "6ebb75": "用法： ysk-server cdn sites upsert --名稱 N --domains a.com,b.com [--邊緣-識別碼 識別碼]… [--origin-url U] [--origin-project 識別碼]" } } } }, "render": { "--site-id": { "id": { "--dry-run": { "2149eb": "用法： ysk-server cdn render --site-識別碼 識別碼 [--預覽試行]" } } } }, "apply": { "--site-id": { "id": { "--edge-id": { "a527b3": "用法： ysk-server cdn 套用 --site-識別碼 識別碼 [--邊緣-識別碼 邊緣]" } } } }, "purge": { "--site-id": { "id": { "--edge-id": { "bc08ec": "用法： ysk-server cdn 清除 --site-識別碼 識別碼 [--邊緣-識別碼 邊緣]" } } } }, "dns-sync": { "--site-id": { "id": { "--apply-zone": { "343068": "用法： ysk-server cdn dns-同步 --site-識別碼 識別碼 [--套用-zone]" } } } }, "sub": { "--data-dir": { "path": { "--json": { "092842": "用法： ysk-server cdn [--data-dir 路徑] [--json]\n nodes 列表|upsert|delete|探測|drain\n sites 列表|upsert|delete|get\n render --site-識別碼 識別碼 [--預覽試行]\n 套用 --site-識別碼 識別碼 [--邊緣-識別碼 識別碼] # fan-out (機群 queue 成功 without 執行)\n 清除 --site-識別碼 識別碼 [--邊緣-識別碼 識別碼]\n dns-同步 --site-識別碼 識別碼 [--套用-zone]\n 探測 | dashboard | health-loop [--套用-zone]\n from-project --project-識別碼 識別碼 [--邊緣-識別碼 識別碼…]\nHonesty: apply_status 已寫入/已排隊 ≠ 邊緣 nginx 已套用 until 代理 回報 / 執行 重新載入." } } } }, "from-project": { "--project-id": { "id": { "--edge-id": { "a96f42": "用法： ysk-server cdn from-project --project-識別碼 識別碼 [--邊緣-識別碼 識別碼]…" } } } } }, "agents": { "fleet": { "remove": { "--session": { "session": { "1827fe": "用法： ysk-server agents 機群 remove --工作階段 SESSION_ID" } } }, "register": { "--id": { "agent": { "209b2d": "用法： ysk-server agents 機群 登記 --識別碼 AGENT_ID [--group g] [--邊緣]" } } }, "commands": { "--session": { "session": { "f8067c": "用法： ysk-server agents 機群 commands --工作階段 SESSION_ID" } } } }, "register": { "--id": { "agent": { "id": { "3c4477": "用法： ysk-server agents 登記 --識別碼 AGENT_ID [--group g]" } } } }, "commands": { "--session": { "session": { "id": { "e620d2": "用法： ysk-server agents commands --工作階段 SESSION_ID" } } } }, "runtimes": { "probe": { "fleet": { "list": { "261fa4": "用法： ysk-server agents [運行時s|探測|機群 列表|機群 登記|機群 commands|登記|commands]" } } } } }, "agent": { "run": { "--control-plane": { "url": { "--id": { "cfefbe": "用法： ysk-server 代理 run --control-plane URL --識別碼 AGENT_ID [--group g]" } } } } }, "ask": { "check": { "system": { "info": { "b0c781": "用法： ysk-server ask \"check system info\"" } } } }, "backup": { "delete": { "--project-id": { "id": { "--name": { "d66c29": "用法： ysk-server backup delete --project-識別碼 識別碼 --名稱 ARCHIVE" } } } }, "restic": { "list": { "run": { "restore": { "10402b": "用法： ysk-server backup Restic 列表|run|還原 …" } } }, "restore": { "--project-id": { "id": { "a8f133": "用法： ysk-server backup Restic 還原 --project-識別碼 識別碼 --快照 SNAP [--預覽試行] [--overwrite-主目錄 --confirm PHRASE]" } } } }, "sub": { "--data-dir": { "path": { "--json": { "777243": "用法： ysk-server backup [--data-dir 路徑] [--json]\n all 備份 all project homes (+ remote/Restic side when configured)\n 列表 [--project-識別碼 識別碼] [--q TEXT]\n 狀態 Last run + schedule 探測\n 還原 --project-識別碼 識別碼 --名稱 ARCHIVE [--模式 full|網站|預覽試行]\n delete --project-識別碼 識別碼 --名稱 ARCHIVE\n schedule [--定時工作 \"0 3 * * *\"] [--安裝]\n control-plane 快照 ysk.json + config.json\n control-plane-還原 --名稱 ARCHIVE [--模式 預覽試行|full] [--confirm 還原-CONTROL-PLANE]\n settings [get|set] Remote / exclusions / Restic\n set --remote-kind local|sftp|s3 --remote-路徑 P [--remote-主機 H] …\n set --exclude a,b,c | --exclusions-檔案 檔案\n set --Restic-啟用 --Restic-密碼 P [--Restic-儲存庫 路徑]\n set --from-json 檔案 # full patch {remote?,exclusions?,Restic?}\n Restic 列表|run|還原 Incremental Restic helpers" } } } }, "control-plane-restore": { "--name": { "archive": { "--mode": { "316a76": "用法： ysk-server backup control-plane-還原 --名稱 ARCHIVE [--模式 預覽試行|full] [--confirm 還原-CONTROL-PLANE]" } } } }, "restore": { "--project-id": { "id": { "--name": { "bc7041": "用法： ysk-server backup 還原 --project-識別碼 識別碼 --名稱 ARCHIVE [--模式 full|網站|預覽試行]" } } } } }, "packages": { "list": { "--q": { "text": { "b8e16b": "用法： ysk-server 套件 列表 [--q text]" } } } }, "projects": { "stop": { "--id": { "projectid": { "b15409": "用法： ysk-server 專案 stop --識別碼 " } } }, "backup": { "--id": { "projectid": { "e62846": "用法： ysk-server 專案 備份 --識別碼 " } } }, "health": { "--id": { "projectid": { "e816ec": "用法： ysk-server 專案 health --識別碼 " } } }, "isolation": { "provision": { "--id": { "projectid": { "5aff44": "用法： ysk-server 專案 isolation provision --識別碼 \n ysk-server 專案 isolation provision-all [--limit 20]" } } }, "backfill-owners": { "--owner-user-id": { "id": { "8691da": "用法： ysk-server 專案 isolation backfill-owners --owner-用戶-識別碼 <識別碼>" } } }, "list": { "provision": { "provision-all": { "8e9da3": "用法： ysk-server 專案 isolation 列表|provision|provision-all|backfill-owners" } } } }, "get": { "--id": { "projectid": { "name": { "b0d532": "用法： ysk-server 專案 get --識別碼 [--json]" } } } }, "create": { "--name": { "name": { "--domain": { "66e857": "用法： ysk-server projects create --name [--domain d] [--runtime node|php|static|python|go|rust] [--template id] [--git-url URL] [--branch B] [--create-dns] [--create-mail] [--server-ip A.B.C.D] [--server-ipv6 ADDR]" } } } }, "deploy": { "--id": { "projectid": { "--entry": { "339111": "用法： ysk-server 專案 deploy --識別碼 [--entry f] [--埠 N] [--fpm|--builtin] [--重新載入]" } } } }, "git-deploy": { "--id": { "id": { "--git-url": { "a513f5": "用法： ysk-server 專案 git-deploy --識別碼 識別碼 [--git-url URL] [--branch|--ref main] [--no-redeploy] [--depth 1] [--entry f]" } } } }, "template": { "--id": { "projectid": { "--template": { "591ce4": "用法： ysk-server 專案 template --識別碼 --template <識別碼> [--force]" } } } }, "list": { "get": { "create": { "deploy": { "253b48": "用法： ysk-server projects list|get|create|deploy|git-deploy|git|stop|backup|template|ftp|health [options]\n deploy --id UUID [--entry f] [--port N] [--fpm|--builtin] [--reload]\n git-deploy --id UUID [--git-url URL] [--branch|--ref B] [--no-redeploy]\n git status|log|fetch|checkout|reset|auth|hook|deploy --id UUID [--ref R] [--unshallow] [--yes]\n git auth --id UUID --token T|--deploy-key|--pin-host\n git hook --id UUID --enable|--rotate|--disable\n ftp --id UUID --password P [--user NAME] [--home app|root]\n" } } } } }, "cli": { "name": { "db-cluster": { "get": { "--id": { "00f803": "用法： {{CLI_NAME}} db-叢集 get --識別碼 UUID [--json]" } }, "plan": { "--id": { "483f52": "用法： {{CLI_NAME}} db-叢集 計劃 --識別碼 UUID [--json]" } }, "artifacts": { "--id": { "6b33c4": "用法： {{CLI_NAME}} db-叢集 artifacts --識別碼 UUID [--json]" } }, "bundle": { "--id": { "94ed27": "用法： {{CLI_NAME}} db-叢集 bundle --識別碼 UUID [--json]" } }, "delete": { "--id": { "3de0e4": "用法： {{CLI_NAME}} db-叢集 delete --識別碼 UUID [--json]" } }, "create": { "--name": { "e3b733": "用法： {{CLI_NAME}} db-叢集 建立 --名稱 N --engine mariadb --kind mariadb-galera --member 主機=role[:access] ..." } }, "apply": { "--id": { "4cddb8": "用法： {{CLI_NAME}} db-叢集 套用 --識別碼 UUID [--執行] [--初始化] [--json]" } }, "probe": { "--id": { "22870c": "用法： {{CLI_NAME}} db-叢集 探測 --識別碼 UUID [--peers] [--json]" } }, "install-peers": { "--id": { "600b02": "用法： {{CLI_NAME}} db-叢集 安裝-peers --識別碼 UUID [--執行] [--no-重新啟動] [--identity 識別碼] [--json]" } }, "push": { "--id": { "697080": "用法： {{CLI_NAME}} db-叢集 推送 --識別碼 UUID [--member 識別碼] [--identity 識別碼] [--執行] [--json]" } }, "fleet": { "--id": { "239462": "用法： {{CLI_NAME}} db-叢集 機群 --識別碼 UUID [--op 套用|探測|計劃] [--執行] [--邊緣-執行] [--json]" } }, "list": { "get": { "3b9cfa": "用法： {{CLI_NAME}} db-叢集 列表|get|建立|計劃|套用|探測|安裝-peers|artifacts|bundle|推送|機群|overview|delete [--peers] [--執行] [--json]" } } }, "ssh-key": { "get": { "--id": { "292716": "用法： {{CLI_NAME}} ssh-金鑰 get --識別碼 UUID [--json]" } }, "public": { "--id": { "525d7d": "用法： {{CLI_NAME}} ssh-金鑰 public --識別碼 UUID" } }, "export": { "--id": { "0a6d81": "用法： {{CLI_NAME}} ssh-金鑰 export --識別碼 UUID [--out 路徑] [--json]" } }, "delete": { "--id": { "a6e2f2": "用法： {{CLI_NAME}} ssh-金鑰 delete --識別碼 UUID [--json]" } }, "create": { "--name": { "8b1d79": "用法： {{CLI_NAME}} ssh-金鑰 建立 --名稱 N [--algo ed25519|rsa-4096] [--purpose 用戶|面板|unbound] [--project 識別碼] [--用戶 U] [--主目錄 路徑] [--reveal] [--json]" } }, "import": { "--name": { "6eb800": "用法： {{CLI_NAME}} ssh-金鑰 匯入 --名稱 N --檔案 路徑 [--purpose 面板|用戶] [--json]" } }, "install": { "--id": { "b99c56": "用法： {{CLI_NAME}} ssh-金鑰 安裝 --識別碼 UUID [--執行] [--json]" } }, "test": { "--id": { "e1aed3": "用法： {{CLI_NAME}} ssh-金鑰 test --識別碼 UUID --目標 用戶@主機[:埠] [--執行] [--json]" } }, "rotate": { "--id": { "9c3224": "用法： {{CLI_NAME}} ssh-金鑰 rotate --識別碼 UUID [--reveal] [--json]" } }, "authorize-self": { "--id": { "b7ea2e": "用法： {{CLI_NAME}} ssh-金鑰 authorize-self --識別碼 UUID [--json]" } }, "uninstall": { "--id": { "afcba0": "用法： {{CLI_NAME}} ssh-金鑰 卸載 --識別碼 UUID [--執行] [--json]" } }, "list": { "get": { "2c92c6": "用法： {{CLI_NAME}} ssh-金鑰 列表|get|建立|匯入|public|export|安裝|test|rotate|authorize-self|卸載|delete [--json]" } } }, "ssh-2fa": { "reveal": { "--id": { "a6c27f": "用法： {{CLI_NAME}} ssh-2fa reveal --識別碼 UUID [--json]" } }, "retire": { "--id": { "6e1fa3": "用法： {{CLI_NAME}} ssh-2fa retire --識別碼 UUID [--json]" } }, "enroll": { "--user": { "081432": "用法： {{CLI_NAME}} ssh-2fa enroll --用戶 LINUX|--project 識別碼 [--主目錄 路徑] [--from-面板] [--json]" } }, "confirm": { "--id": { "9ee8a2": "用法： {{CLI_NAME}} ssh-2fa confirm --識別碼 UUID --code 123456 [--json]" } }, "install": { "--id": { "dace06": "用法： {{CLI_NAME}} ssh-2fa 安裝 --識別碼 UUID [--執行] [--json]" } }, "uninstall": { "--id": { "0bb464": "用法： {{CLI_NAME}} ssh-2fa 卸載 --識別碼 UUID [--執行] [--json]" } }, "list": { "enroll": { "802ed0": "用法： {{CLI_NAME}} ssh-2fa 列表|enroll|confirm|安裝|卸載|pam|reveal|retire [--json]" } } }, "ssl": { "list": { "get": { "79c232": "用法： {{CLI_NAME}} ssl 列表|get --網域 X [--json]" } }, "get": { "--domain": { "91c444": "用法： {{CLI_NAME}} ssl get --網域 example.com [--json]" } } }, "dns": { "zone": { "--zone": { "ad30fa": "用法： {{CLI_NAME}} dns zone --zone example.com --ip A.B.C.D [--ipv6 X:X::X] [--validate] [--重新載入]" } }, "zones": { "zone": { "5b8bda": "用法： {{CLI_NAME}} dns zones|zone --zone X --ip A.B.C.D [--ipv6 …] [--json]" } } }, "nginx": { "status": { "list": { "d67a16": "用法： {{CLI_NAME}} nginx 狀態|列表|test|同步 [--執行] [--json]" } } }, "host": { "overview": { "metrics": { "93c828": "用法： {{CLI_NAME}} 主機 overview|metrics|network [--路徑 /] [--json]" } } }, "logs": { "sources": { "overview": { "79058c": "用法： {{CLI_NAME}} 日誌 sources|overview|units|系統日誌|query [--source 識別碼] [--json]" } } }, "services": { "sub": { "--unit": { "4fe3fa": "用法： {{CLI_NAME}} services {{sub}} --unit <系統服務-服務單元> [--執行] [--json]" } }, "matrix": { "start": { "4f3a35": "用法： {{CLI_NAME}} services matrix|start|stop|重新啟動|重新載入 --unit 名稱 [--執行] [--json]" } } }, "defense": { "ban": { "--ip": { "cc22de": "用法： {{CLI_NAME}} defense 封鎖 --ip [--method fail2ban|ufw|both] [--reason t] [--執行]" } }, "unban": { "--ip": { "46aa23": "用法： {{CLI_NAME}} defense unban --ip [--method fail2ban|ufw|both] [--執行]" } }, "whitelist": { "--action": { "c1cbdf": "用法： {{CLI_NAME}} defense whitelist --action 列表|add|remove [--ip IP]" } }, "status": { "bans": { "a8d96b": "用法： {{CLI_NAME}} defense 狀態|bans|suspects|封鎖|unban|whitelist|stack-套用|fail2ban|firewall|timeline|預設方案s [--json]\n bans [--q text] [--source fail2ban|面板|ufw|auto]\n suspects [--q text]\n stack-套用 [--執行] # UFW + fail2ban + current 預設方案\n fail2ban | firewall # deep probes (honest)\n timeline [--limit N] [--q text]\n 預設方案s # 列表 + active預設方案" } } } } }, "system": { "unit-install": { "--enable": { "--data-dir": { "path": { "33daa1": "用法： ysk-server system 服務單元-安裝 [--啟用] [--data-dir 路徑]" } } } } }, "users": { "create": { "--username": { "u": { "--password": { "7145c7": "用法： ysk-server users 建立 --username --密碼

[--role operator|viewer|管理員] [--套件-識別碼 識別碼] [--locale zh-HK]" } } } }, "list": { "--q": { "text": { "--role": { "544685": "用法： ysk-server users 列表 [--q text] [--role 管理員|operator|viewer]\n ysk-server users 建立 --username u --密碼 p [--role operator]" } } } } }, "rbac": { "list": { "policies": { "330ade": "用法： ysk-server rbac 列表|policies\n ysk-server rbac show --role operator\n ysk-server rbac audit # route→cap sample matrix" } } }, "hosting": { "postgres-provision": { "--db": { "name": { "--user": { "2c8889": "用法： ysk-server hosting postgres-provision --db 名稱 --用戶 U --密碼 P(min8) [--執行]\n 預設 預覽試行 (no 主機 change). Pass --執行 + 系統變更權限已開啟 to 套用." } } } }, "mysql-provision": { "--db": { "name": { "--user": { "fc25aa": "用法： ysk-server hosting mysql-provision --db 名稱 --用戶 U --密碼 P(min8) [--執行]\n 預設 預覽試行 (no 主機 change). Pass --執行 + 系統變更權限已開啟 to 套用." } } } }, "dns-zone": { "--zone": { "example": { "com": { "bdaa0d": "用法： ysk-server hosting dns-zone --zone example.com --ip A.B.C.D [--ipv6 X:X::X] [--validate] [--重新載入]" } } } }, "powerdns-load": { "--zone": { "example": { "com": { "dba49c": "用法： ysk-server hosting powerdns-load --zone example.com --ip A.B.C.D [--ipv6 X:X::X] [--load|--執行]" } } } }, "email-apply": { "--domain": { "example": { "com": { "37d350": "用法： ysk-server hosting 電郵-套用 --網域 example.com [--安裝|--執行]" } } } }, "email-mailbox": { "--domain": { "x": { "--local": { "3d9be3": "用法： ysk-server hosting 電郵-mailbox --網域 X --local 用戶 [--密碼 P] [--ip A.B.C.D]" } } } }, "ftps-apply": { "--domain": { "files": { "example": { "284a7c": "用法： ysk-server hosting ftps-套用 --網域 檔案.example.com [--安裝|--執行]" } } } }, "webmail-apply": { "--domain": { "webmail": { "example": { "2ad5b5": "用法： ysk-server hosting webmail-套用 --網域 webmail.example.com [--下載]" } } } }, "public-files": { "--domain": { "files": { "example": { "0e9013": "用法： ysk-server hosting public-檔案 --網域 檔案.example.com [--重新載入]" } } } }, "email-deliverability": { "--domain": { "example": { "com": { "8774a4": "用法： ysk-server hosting 電郵-deliverability --網域 example.com\n ysk-server hosting 電郵-deliverability --識別碼 " } } } }, "email-bootstrap": { "--domain": { "example": { "com": { "796da5": "用法： ysk-server hosting 電郵-初始化 --網域 example.com --ip 1.2.3.4 [--管理員 postmaster] [--密碼 P] [--安裝]" } } } } }, "migrate": { "post": { "--job": { "id": { "--data-dir": { "6a73cd": "用法： ysk-server migrate post --job <識別碼> --data-dir 路徑 --執行" } } } }, "host": { "--target": { "root": { "new": { "3e94a2": "用法： ysk-server migrate 主機 --目標 管理員@NEW_IP [--identity-檔案 路徑|--identity-識別碼 識別碼] [--密碼] --執行 --data-dir 路徑" } } } } }, "x": { "972912": "用法：\n ysk-server migrate inventory [--data-dir PATH] --json\n ysk-server migrate host --target root@IP [--identity-file PATH|--identity-id ID|--password PW] --execute [--maintenance] [--force-wipe-target]\n ysk-server migrate post --job ID --data-dir PATH --execute # 在目標機\n ysk-server migrate status [--job ID]\n ysk-server migrate resume --job ID --execute\n ysk-server migrate orphan-homes [--data-dir PATH] --json\n ysk-server migrate orphan-homes --path /home/ysk-server-UUID --confirm PATH --execute\n" }, "hostingHelp": "用法：ysk-server hosting \n 危險操作預設 預覽試行；加 --執行（+ 系統變更權限已開啟）才真正套用\n nginx | nginx-同步 [--執行]\n redis-provision | postgres-provision | mysql-provision [--執行]\n dns-zone --zone X --ip A.B.C.D [--ipv6 X:X::X] [--validate] [--重新載入]\n dns-zones | powerdns-狀態 | powerdns-安裝 [--安裝|--執行]\n powerdns-load --zone X --ip A.B.C.D [--load|--執行]\n 電郵-套用 --網域 X [--安裝|--執行]\n 電郵-mailbox --網域 X --local 用戶 [--密碼 P] [--ip A.B.C.D] [--system]\n ftps-套用 --網域 X [--安裝|--執行]\n 運行時s | 運行時-安裝 --kind node|php|python|go|rust --version V [--安裝|--執行]\n dovecot-passdb --網域 X | --all\n webmail-套用 --網域 webmail.example.com [--下載]\n public-檔案 --網域 檔案.example.com [--重新載入]\n 電郵-初始化 --網域 example.com --ip A.B.C.D [--安裝|--執行]\n 電郵-deliverability --網域 example.com # PTR/DNSBL/warmup 誠實報告\n firewall-套用 [--smtp] [--執行]", "logsQuery": "用法：{{CLI_NAME}} 日誌 query --source <識別碼> [--lines N] [--grep G] [--since 1h] [--priority err]\n source 例：系統日誌: 系統日誌:nginx.service 檔案:syslog project:\n {{CLI_NAME}} 日誌 sources --json\n {{CLI_NAME}} 日誌 系統日誌 [--unit nginx.service] --json" }, "msg": { "domain": { "missing": { "pass": { "5be09b": "缺少域名 — 請傳 --ip 以先建立域名" } } }, "--root": { "must": { "be": { "a84834": "--root 必須是 public 或 project:\n" } } }, "need": { "--content": { "or": { "4d7001": "需要 --content 或 --file\n" } }, "at": { "least": { "7d311a": "至少需要一個 --member HOST[=role][:access]\n" } } }, "action": { "must": { "be": { "ba14c1": "action 必須是 list|add|remove\n" } } }, "use": { "ysk-server": { "backup": { "ca67f4": "請用：ysk-server backup control-plane-restore --name ARCHIVE（不要用 restore --project-id control-plane）\n" } } }, "new": { "domain": { "requires": { "986b78": "新網域需要 --ip A.B.C.D（不要用佔位預設）\n" } } }, "import-sync": { "prefers": { "fleet": { "4d7590": "import-sync 優先用 fleet clusterSync payload；或 --file snapshot.json\n" } } }, "security": { "control": { "plane": { "f59a63": "安全：控制平面綁定公開位址 (0.0.0.0/::)。建議 127.0.0.1 + 反向代理 / UFW。\n" } } } }, "err": { "unknown": { "email": { "sub": { "sub": { "e37257": "未知 電郵 子命令： {{sub}}\n執行： ysk-server 電郵 help" } } }, "cron": { "sub": { "sub": { "e1a9ed": "未知 定時工作 子命令： {{sub}}\n執行： ysk-server 定時工作 help" } } }, "files": { "sub": { "sub": { "07ad7e": "未知 檔案 子命令： {{sub}}\n執行： ysk-server 檔案 help" } } }, "store": { "sub": { "sub": { "b7a083": "未知 store 子命令： {{sub}}\n執行： ysk-server store help" } } }, "cdn": { "subcommand": { "sub": { "76664f": "未知 cdn 子命令： {{sub}}\n執行： ysk-server cdn help" } } }, "backup": { "subcommand": { "sub": { "4092ad": "未知 備份 子命令： {{sub}}\n執行： ysk-server backup help" } } } } }, "setup": { "dryRunOk": "{{product}} setup 預覽試行 成功", "dryRunNext": "再次執行時請去掉 --預覽試行，以寫入設定並初始化資料庫", "weakPassword": "管理員密碼過弱或仍為預設。請傳入強密碼 --管理員-密碼（最少 8 位，勿用 管理員／常見預設），或本機開發設 YSK_ALLOW_INSECURE_DEFAULTS=1。", "weakPasswordShort": "已拒絕過弱或預設管理員密碼", "nextStart": "啟動（介面 + Web UI）：{{cli}} serve --config {{configPath}}", "nextOpen": "開啟 http://{{host}}:{{port}}/ 並以 {{user}} 登入", "nextUnit": "系統服務單元 範本：{{unitPath}}", "nextInstall": "安裝 服務單元（管理員權限與系統變更權限）：{{cli}} system 服務單元-安裝 --啟用 --data-dir {{dataDir}}", "nextExecute": "生產主機變更需要 系統變更權限已開啟 與管理員權限", "nextGolive": "上線：docs/deploy/go-live.md + ysk-server 就緒檢查 --json", "secPassword": "安全：請立即更改管理員密碼（初始化 使用了弱／預設密碼）", "sec2fa": "安全：請在「帳號安全 → 帳戶」啟用管理員 雙重驗證", "secListen": "安全：正在監聽所有介面 — 請放防火牆／反向代理之後；管理建議 127.0.0.1 + 遠端登入 tunnel", "ok": "{{product}} setup 完成（資料庫已初始化）", "okInsecure": "{{product}} setup 完成（資料庫已初始化）［不安全 初始化 — 請改密碼］" } }, "common": { "all": "全部", "cancel": "取消", "confirm": "確認", "refresh": "重新整理", "loading": "載入中…", "save": "儲存", "apply": "套用", "close": "關閉", "copy": "複製", "copied": "已複製", "expandAll": "全部展開", "collapseAll": "全部摺疊", "empty": "無資料", "back": "返回", "showTechnical": "顯示技術詳情", "hideTechnical": "隱藏技術詳情", "needExecute": "需開啟系統變更權限", "needRoot": "需系統管理員權限", "needExecuteRoot": "需系統變更權限與系統管理員", "writtenOnly": "已寫入管理檔，未套用到系統", "applyToLive": "套用後才生效", "saveDraft": "儲存草稿", "languageName": "繁體中文", "languageNative": "繁體中文", "language": "語言", "switchLanguage": "切換語言", "showPassword": "顯示", "hidePassword": "隱藏", "searchGlobal": "搜尋頁面與資源…", "menu": "選單", "processing": "處理中…", "unavailable": "目前不可用", "retry": "再試", "success": "成功", "ok": "正常", "failed": "失敗", "blocked": "無法執行", "status": "狀態", "port": "埠", "url": "網址", "actions": "操作", "noData": "沒有資料", "input": "輸入", "pleaseEnter": "請輸入 {{value}}", "pleaseFill": "請填寫", "required": "必填", "about": "說明", "more": "更多", "operation": "操作", "delete": "刪除", "edit": "編輯", "create": "建立", "install": "安裝", "installing": "安裝中…", "reprobe": "重新探測", "search": "搜尋", "yes": "是", "no": "否", "on": "開", "off": "關", "open": "開啟", "enabled": "已啟用", "disabled": "已停用", "installed": "已安裝", "notInstalled": "未安裝", "running": "運行中", "stopped": "已停止", "ready": "就緒", "unknown": "未知", "normal": "正常", "degraded": "降級", "missing": "缺少", "available": "可用", "applied": "已套用", "notApplied": "未套用", "completed": "已完成", "incomplete": "未完成", "probed": "已探測", "notProbed": "未探測", "probe": "探測", "name": "名稱", "username": "用戶名", "password": "密碼", "domain": "域名", "host": "主機", "version": "版本", "type": "類型", "mode": "模式", "notes": "備註", "time": "時間", "steps": "步驟", "target": "目標", "package": "套件", "panel": "面板", "system": "系統", "user": "用戶", "project": "專案", "database": "資料庫", "mail": "郵件", "files": "檔案", "memory": "記憶體", "custom": "自訂", "static": "靜態", "lifecycle": "生命週期", "loadFailed": "載入失敗", "saveFailed": "儲存失敗", "opFailed": "操作失敗", "installFailed": "安裝失敗", "createFailed": "建立失敗", "deleteFailed": "刪除失敗", "applyFailed": "套用失敗", "startFailed": "啟動失敗", "statusLoadFailed": "狀態載入失敗", "downloadFailed": "下載失敗", "uploadDone": "已上傳 {{count}} 個檔案", "downloadStarted": "已開始下載 {{name}}", "savedOk": "已儲存", "noneSelectedShort": "—", "unknownError": "未知錯誤", "writtenSettings": "已寫入設定", "panelBlocked": "無法在管理面板完成此操作", "partialSuccess": "操作未完全成功", "createdOk": "已建立", "updatedOk": "已更新", "deletedOk": "已刪除", "applyDone": "套用完成", "applyIncomplete": "套用未完成", "checking": "檢查中…", "dismiss": "關閉", "hide": "隱藏", "show": "顯示", "done": "完成", "next": "下一步", "previous": "上一步", "redirectedTo": "已轉到 {{to}}（原為 {{from}}）" }, "cron": { "presetCdTrue": "cd app + 是（測試）", "presetCleanTmp": "清理暫存（示例）", "presetNpmCron": "npm run 定時工作（若有）", "presetAppBin": "執行 app binary", "presetRsync": "同步靜態（示例 同步複製）", "noLinuxUser": "（未有 linux 用戶）· {{name}}", "projectUser": "專案用戶", "panelUser": "ysk · 面板／系統", "system": "系統", "rootCareful": "管理員 · 系統（慎用）", "customUser": "{{user}} · 自訂", "success": "成功", "failed": "失敗", "noProjects": "尚未有專案", "noProjectsHint": "請先建立專案並（建議）建立系統用戶，再登記 定時工作", "userSuffix": "· 用戶", "mon": "一", "tue": "二", "wed": "三", "thu": "四", "fri": "五", "sat": "六", "sun": "日", "everyNMin": "每 N 分鐘", "fixedInterval": "固定間隔", "hourly": "每小時", "atMinute": "指定第幾分", "daily": "每日", "atTime": "指定時:分", "weekly": "每週", "weekdayTime": "星期 + 時間", "monthly": "每月", "dayTime": "日期 + 時間", "advanced": "進階", "customExpr": "自訂表達式", "everyMinute": "每分鐘", "everyMinutes": "每 {{n}} 分鐘", "hourlyAt": "每小時 第 {{n}} 分", "dailyAt": "每日 {{time}}", "weeklyNone": "每週（未選日） {{time}}", "weeklyAt": "每週{{days}} {{time}}", "monthlyAt": "每月 {{day}} 日 {{time}}", "customAt": "自訂：{{expr}}", "frequency": "排程頻率", "interval": "間隔", "fromHour": "由整點起算", "intervalMinutes": "間隔分鐘", "min1": "1 分", "minN": "{{n}} 分", "minuteOfHour": "在每小時的第幾分", "minPad": "{{n}} 分", "hour": "小時", "minute": "分鐘", "pickWeekdays": "選擇星期", "dayOfMonth": "每月第幾日", "dayOfMonthHint": "31 日月份沒有該日則跳過", "cronExpr": "定時工作表 表達式", "cronExprHint": "五欄：分 時 日 月 週（0=日）", "cronExprPh": "定時工作表 表達式", "needLinuxUser": "所選專案沒有 Linux 用戶 — 請先到專案「隔離」建立系統用戶", "boundProject": "已綁專案；執行用戶 {{user}}（指令會以 runuser 隔離）", "systemJob": "系統工作；執行用戶 {{user}}", "writtenManage": "已寫入管理 定時工作表（尚未安裝到系統）", "needInstall": "請按「安裝到系統 定時工作表」才會真正生效", "createdManageOnly": "已建立（僅管理檔）", "installedSystem": "已安裝到系統", "hostSynced": "系統已同步", "hostNotInstalled": "面板定時工作尚未寫入系統 crontab", "statusUnknown": "狀態未知", "systemCrontab": "面板 crontab 同步", "synced": "已同步", "managedLines": "管理行數", "jobsOnlyManage": "工作只寫在管理檔。系統 定時工作表", "hostHasYsk": "已包含 YSK 項目", "hostNoYsk": "尚未安裝或無 YSK 項目", "pressInstall": "有已登記但未寫入系統的工作 — 請按「安裝到系統」。", "jobsTab": "工作 ({{count}})", "jobsTabPending": "工作 ({{count}}) · 待安裝 {{pending}}", "registeredJobs": "已登記工作 ({{count}})", "jobsSub": "管理檔項目 · 改動後需「安裝到系統」才生效", "addJob": "+ 新增工作", "noCron": "尚未有 定時工作", "noCronDesc": "用列表右上角新增工作，再安裝到系統 定時工作表", "onceInstalled": "曾安裝", "manageOnly": "僅管理檔", "projectLabel": "專案", "systemLevel": "系統級", "runOnce": "立即執行", "runOnceOk": "已執行一次", "updatedManage": "已更新管理檔；請重新安裝到系統 定時工作表", "updatedManageShort": "已更新管理檔", "deletedManage": "已從管理檔刪除；請重新安裝同步系統", "installStatus": "安裝狀態", "manageVsHost": "管理檔 vs 主機", "hostYsk": "主機 YSK", "lastInstall": "上次安裝", "installToSystem": "安裝到系統 定時工作表", "installHint": "安裝會合併主機 crontab：保留非 YSK 行，只更新面板管理的工作。需系統變更權限。", "hostPreview": "主機 定時工作表 預覽", "cannotRead": "無法讀取或尚未安裝（需權限）", "addJobTitle": "新增工作", "addJobDesc": "寫入管理檔；需「安裝到系統」後 定時工作表 才會執行", "createManageOnly": "建立（僅管理檔）", "whenRun": "何時執行", "whenRunHint": "用下方卡片揀頻率與時間；進階模式可手寫 定時工作表", "userPathHint": "用戶 + 指令路徑會跟專案 主目錄／運行時 更新", "pickProject": "— 請選擇專案 —", "runAsUser": "執行用戶", "runAsHint": "揀專案用戶會同步上方專案；揀系統用戶則為系統級 定時工作", "noProjectsYet": "（尚未有專案）", "runInHome": "在專案 主目錄 下執行（{{home}}）；儲存時會包 runuser", "absPath": "建議絕對路徑", "commonCmds": "常用指令（{{runtime}}）", "actualPreview": "實際寫入 定時工作表（預覽）", "noLinuxName": "此專案未有 Linux 用戶名 — 請到專案「隔離」建立系統用戶後再試。", "afterCreate": "建立後：", "projectParen": "（專案 {{name}}）", "systemParen": "（系統級，未綁專案）", "weekLabel": "星期", "willRun": "將執行", "projectNoLinux": "（未有 linux 用戶）", "createManageOnlyParen": "建立（僅管理檔）", "runAsHintFull": "揀專案用戶會同步上方專案；揀系統用戶則為系統級 定時工作", "systemParenFull": "（系統級，未綁專案）", "hostOtherLines": "主機非 YSK 行數", "hostOtherLinesVal": "其他 {{other}} 行（主機有效共 {{total}}）", "deleteTitle": "刪除 Cron 工作？", "deleteDesc": "將刪除「{{name}}」。套用到系統 crontab 前只影響控制面。", "hostJobs": "主機工作", "hostJobsTitle": "主機 crontab（{{count}}）", "usersScanned": "用戶", "filterUser": "用戶", "filterAll": "全部用戶", "sourceYsk": "面板", "sourceHost": "主機", "noHostJobs": "此範圍沒有 crontab 工作", "hostPartial": "無法完整讀取所有用戶 crontab（需要 root）", "pendingInstall": "待安裝到系統（{{count}}）", "pendingStale": "已 {{days}} 日未寫入系統 crontab，不會執行。", "willNotRun": "未寫入系統 crontab — 不會執行。", "hourRange": "小時必須介乎 0–23。", "minuteRange": "分鐘必須介乎 0–59。", "hoursCommon": "常用小時", "hoursAll": "全部小時", "invalidExpr": "不是有效的 5 欄 cron 表達式。", "needCommand": "請填寫指令。", "needUser": "請選擇專案或系統用戶。", "hostCounts": "主機行數", "hostCountsVal": "{{ysk}} · 其他 {{other}} · 合共 {{total}}", "hostYskYes": "已有面板行", "hostYskNo": "尚無面板行", "emptyHostCrontab": "用戶 {{user}} 尚未有 crontab。", "writtenOnHost": "已寫入", "registeredJobsChip": "已登記", "registeredVsWritten": "已在面板登記 vs 已寫入主機 crontab", "installPreviewTitle": "安裝到系統前預覽", "installPreviewDesc": "會把 YSK 區塊合併入主機 crontab，不會覆寫非 YSK 行。", "installPreviewMerge": "安裝會寫入 YSK Server crontab merge 區塊，不會整份取代 host crontab。", "installPreviewEmpty": "沒有待安裝工作 — 仍會重新整理 YSK 區塊。", "editJobTitle": "編輯工作", "editJobDesc": "變更只寫入控制面，須再安裝到系統 crontab 才生效。", "saveJob": "儲存（僅管理）", "panelLines": "面板行", "otherLines": "非面板行", "totalLines": "合計", "writtenOnHostHint": "已寫入主機 crontab 的行", "registeredJobsHint": "已在面板登記的工作（含待安裝）", "pendingInstallCount": "{{n}} 項待安裝", "systemJobBadge": "未綁專案 · 系統用戶", "hostEdit": "修改", "hostEditTitle": "修改主機 crontab 行", "hostEditDesc": "立即寫入該用戶的線上 crontab。需要 root 與 YSK_EXECUTE=1。其他行不變。", "hostSave": "寫入 crontab", "hostSaveTitle": "寫入此 crontab 行？", "hostSaveDesc": "會取代 {{user}} 的線上行。請輸入 EDIT 確認。", "hostDisable": "停用", "hostDisableTitle": "停用主機 crontab 行？", "hostDisableDesc": "會把 {{user}} 該行改成註解。請輸入 DISABLE 確認。", "hostEnable": "啟用", "hostEnableTitle": "啟用主機 crontab 行？", "hostEnableDesc": "會移除 {{user}} 該行的註解。請輸入 ENABLE 確認。", "hostRunTitle": "試跑此主機指令一次？", "hostRunDesc": "立即以 {{user}} 執行。不會改 crontab。請輸入 RUN 確認。", "hostAdopt": "納入面板", "hostAdoptTitle": "把此主機行納入面板？", "hostAdoptDesc": "會在線上行加上 # ysk:id 並登記。下一輪安裝不會重複。請輸入 ADOPT 確認。", "hostDeleteTitle": "移除主機 crontab 行？", "hostDeleteDesc": "會移除 {{user}} 的線上行。請輸入該指令確認。", "hostUserLocked": "crontab 擁有者（此處不能搬到其他用戶）", "hostLinePreview": "將寫入的行", "disabledJob": "已停用", "confirmMismatch": "確認內容必須與指令相同。", "writtenHost": "已寫入主機 crontab", "adoptedHost": "已納入面板", "keepDisabledHint": "此行已停用。儲存後仍保持註解。", "currentLine": "現時", "nextLine": "下一行" }, "dashboard": { "serviceAria": "{{name}}：{{state}}", "sev": { "ok": "成功", "warn": "警告", "bad": "異常" }, "title": "控制台", "health": "健康狀態", "protection": "保護模式", "welcome": "歡迎使用 YSK 伺服器", "audit": "最近審計", "needLogin": "請先登入以查看審計紀錄", "features": "功能選單", "featuresHint": "角標：就緒＝軟件已裝；未安裝＝需一鍵安裝；需權限＝未開系統變更。", "badge": { "panel": "面板", "notInstalled": "未安裝", "ready": "就緒", "installed": "已裝", "prodReady": "可生產", "check": "檢查", "needPerm": "需權限" }, "status": { "healthy": "健康", "prodReady": "可生產", "needsCheck": "需檢查" }, "stat": { "backups": "備份", "notifications": "通知", "certExpiry": "憑證到期" }, "tabs": { "overview": "概覽", "wizard": "一鍵建立", "notifications": "通知", "features": "功能入口" }, "serviceHealth": "服務健康", "serviceHealthDesc": "系統控制 實時探測", "fullServiceMatrix": "完整服務矩陣", "readinessCheck": "就緒檢查：", "prodOk": "可作生產", "notFullyReady": "尚未完全就緒", "readinessBlocked": "有 {{n}} 項阻擋", "modeScore": "模式 {{mode}} · 分數 {{ready}}/{{total}}", "mode": { "degraded": "降級", "production_capable": "EXECUTE＋root", "blocked": "有阻擋", "normal": "正常" }, "details": "詳情", "certExpiryTitle": "憑證到期：", "certExpired": "已過期", "certDays": "{{days}} 日", "securityStrip": "安全與套用狀態", "securityStripDesc": "真實通知 + 套用 誠實審計（已寫入 ≠ 已套用）", "notifCount": "通知 {{count}}", "criticalCount": "· 嚴重 {{count}}", "warnCount": "· 警告 {{count}}", "applyAuditBadge": "套用檢查：成功 {{ok}} · 警告 {{warn}} · 異常 {{bad}}", "executeBadge": "系統變更 {{state}}", "executeLabel": "系統變更", "publicNo2fa": "面板正聽全部介面，而你的管理員帳號未開 2FA。", "go": "前往", "open": "開啟", "noCriticalWarn": "目前無嚴重／警告通知", "notifCenter": "通知中心", "noHealthYet": "尚未取得健康狀態", "sysChange": "系統變更", "opened": "已開", "closed": "未開", "readinessLink": "就緒檢查 →", "hostMetrics": "主機指標", "loadAvg": "Load average（1 · 5 · 15 分）", "memoryDash": "記憶體 —", "metricsLink": "詳細指標 →", "runningOf": "運行 {{running}}/{{total}}", "noProjects": "尚未有專案", "wizardLink": "一鍵建立 →", "allProjects": "全部專案 →", "recentN": "最近 {{n}}", "runningCount": "運行中 {{n}}", "securityLink": "安全 →", "wizardTitle": "一鍵建立", "wizardDesc": "建立專案，並可選一併登記 DNS／郵件／資料庫草稿（各項需再到對應頁套用）", "projectName": "專案名稱", "projectNameHint": "控制台顯示名稱；會產生對應目錄", "nameRequired": "請輸入專案名稱", "domainOptional": "域名（可留空）", "domainHint": "填寫後才可勾選 DNS 與郵件", "runtime": "執行環境", "runtimeHint": "決定預設 運行時 版本與部署方式", "runtimeVersion": "執行環境版本", "versionHint": "會寫入專案的執行環境版本設定", "serverIpv4": "伺服器 IPv4", "serverIpv4Hint": "DNS A／郵件 SPF", "serverIpv4Ph": "此主機公網 IPv4", "serverIpv6": "伺服器 IPv6（可選）", "serverIpv6Hint": "有則寫 AAAA／ip6:", "serverIpv6Ph": "公網 IPv6（可留空）", "needDomainFirst": "請先填域名", "withDns": "一併建立 DNS 區域", "withDnsDesc": "需填寫域名；僅登記，需到 DNS 頁寫入區域檔", "withMail": "一併登記郵件域名", "withMailDesc": "需填寫域名；軟件安裝與 DNS 在郵件詳情頁完成", "withDb": "一併建立資料庫草稿", "withDbDesc": "控制面登記；需到 SQL 引擎頁套用到系統", "wizardHint": "一鍵建立不會自動對外上線。DNS、郵件、資料庫與 SSL 請到各功能頁確認並套用。", "wizardSubmit": "一鍵建立", "wizardOk": "建立完成", "wizardPartial": "部分失敗", "notifCenterTitle": "通知中心（{{count}}）", "notifCenterDesc": "嚴重 {{critical}} · 警告 {{warn}} · 資訊 {{info}}", "noNotifs": "暫無通知。近期審計紀錄見「概覽」。", "noNotifsDesc": "系統告警與待辦會顯示於此", "applyAuditTitle": "套用狀態審計", "applyAuditDesc": "正常 {{ok}} · 警告 {{warn}} · 異常 {{bad}}", "barTitle": "{{count}} 則主機提示", "levelCritical": "嚴重", "levelWarn": "警告", "levelInfo": "資訊", "colTitle": "提示", "colDetail": "詳情", "colSource": "來源", "notifSearch": "搜尋通知", "notifAll": "全部", "notifDismiss": "隱藏", "goFix": "前往處理" }, "dataTable": { "empty": "沒有資料", "actions": "操作" }, "db": { "serviceSettings": "服務設定", "installedOk": "{{engine}} 已安裝", "startedOk": "{{engine}} 已啟動", "installFirst": "請先安裝 {{engine}}", "softwareMissing": "{{engine}} 所需軟件尚未安裝", "serviceOverview": "服務概覽", "readonlyStatus": "唯讀狀態", "readonlyProbe": "唯讀探測", "systemChange": "系統變更", "opened": "已開啟", "notOpened": "未開啟", "admin": "管理員", "client": "客戶端", "hasClient": "有", "noClient": "無", "canProvision": "可建立資料庫", "dumpOk": "匯出完成", "dumpFailed": "匯出失敗", "noDumpToImport": "尚無可匯入的備份檔", "expiredTempUsersProcessed": "已處理過期臨時用戶", "dumpFirstDb": "匯出首個資料庫", "importLatestDump": "匯入最新備份", "cleanupExpiredTempUsers": "清理過期的臨時用戶", "adminerEntry": "資料庫管理專案", "browserProjectTitle": "建立資料庫管理專案", "browserTool": "工具", "browserNameHint": "會建立一個 PHP 專案；名稱不可重複", "browserNameTaken": "專案名稱已存在：{{name}}", "browserProjectCreated": "資料庫管理專案已建立", "createBrowserProject": "建立專案並部署", "downloadPhpMyAdmin": "下載 phpMyAdmin（需要系統變更權限及外網）", "createDatabase": "建立資料庫", "installBannerHint": "請使用上方橫幅的「一鍵安裝」安裝 {{engine}}。", "exclusiveMariaHint": "此主機為 MariaDB。請到 MariaDB 頁管理，或一鍵切換（須輸入 SWITCH）。", "exclusiveMysqlHint": "此主機為 MySQL。請到 MySQL 頁管理，或一鍵切換（須輸入 SWITCH）。", "openMaria": "MariaDB", "openMysql": "MySQL", "openMariaService": "MariaDB 服務", "openMysqlService": "MySQL 服務", "startService": "啟動服務", "openServiceConsole": "開啟服務控制台", "opsResult": "操作結果", "tempPasswordOnce": "臨時只讀密碼（只顯示一次）：", "tabDatabases": "資料庫 ({{count}})", "tabUsers": "用戶 ({{count}})", "tabTemp": "臨時只讀 ({{count}})", "tabRemote": "遠端主機 ({{count}})", "dbList": "資料庫列表", "charset": "字元集", "noDatabasesYet": "尚未有資料庫", "emptyDbInstallFirst": "請先使用上方橫幅一鍵安裝 {{engine}}，再用右上角「建立資料庫」", "emptyDbCannotProvision": "目前無法在伺服器建立資料庫", "emptyDbCreateHint": "用右上角「建立資料庫」新增；建立後請再按「套用」", "emptyDbHostHasRows": "主機已有資料庫，但尚未在控制面登記。", "registeredVsHostHint": "已在面板登記 / 主機實測", "registeredCount": "已登記", "hostCount": "主機", "registeredUsers": "已登記用戶", "registeredUsersHint": "只計面板登記，不是主機全部 MySQL 帳號", "hostStillExists": "主機仍存在", "expiresLabel": "到期", "dumpNeedRegistered": "請先在面板登記資料庫", "dumpFirstDbTitle": "匯出第一個已登記資料庫", "importNeedRegistered": "請先在面板登記資料庫", "importLatestNeedConfirm": "需確認 — 會匯入到已登記資料庫", "hostHasUntracked": "主機另有 {{count}} 個未在面板登記的資料庫", "hostInventoryHint": "列表只顯示控制面已登記的資料庫；即時名稱來自 SHOW DATABASES。", "userList": "用戶列表", "userListDesc": "可為資料庫授權用戶", "createUserBtn": "+ 建立用戶", "noUsersYet": "尚未有用戶", "tempReadonlyUsers": "臨時只讀用戶", "tempReadonlyDesc": "開啟此頁時會嘗試從伺服器刪除已到期帳號（需 EXECUTE 與 root）。仍留在下列者代表主機帳號尚未刪除。", "dbName": "資料庫名稱", "ttlHours": "有效時數", "ttlHoursHint": "到期後標記失效", "createReadonlyUser": "建立只讀用戶", "tempUserCreated": "已建立臨時只讀用戶", "expiresAt": "到期", "revokeRegistration": "撤銷登記", "remoteDbHosts": "遠端資料庫主機", "remoteDbHostsDesc": "登記連線目標（密碼不回顯）。未按「測試連線」前，已儲存 ≠ 可達。", "remoteTest": "測試連線", "remoteTestDone": "遠端主機探測完成", "remoteTestOk": "可達", "remoteTestFail": "不可達", "remoteNotChecked": "未測試", "remoteDeleteTitle": "只移除登記", "remoteDeleteConfirm": "移除登記 {{name}}？遠端伺服器不會被改動。", "displayName": "顯示名稱", "prodReplicaPlaceholder": "生產從庫", "remoteHostSaved": "已儲存遠端主機", "createDbTitle": "建立 {{engine}} 資料庫", "createDbDesc": "建立控制面登記後，請按「套用」寫入伺服器", "dbNameHint": "小寫英數與底線；建立後需再套用到系統", "alsoCreateUser": "同時建立用戶", "alsoCreateUserDesc": "一併建立可連線此庫的帳號", "passwordMin8": "至少 8 位", "passwordMin8chars": "至少 8 字元", "allowConnectHost": "允許連線主機", "allowConnectHostHint": "常用 %（任意）或 localhost", "allowConnectHostHintShort": "常用 % 或 localhost", "createDbHint": "僅寫入控制面登記；於列表按「套用」後，才會在伺服器建立資料庫。", "createUserTitle": "建立 {{engine}} 用戶", "createUserDesc": "建立後請套用", "bindDatabase": "綁定資料庫", "bindDatabaseHint": "可選：授權此庫權限", "noneOption": "— 無 —", "importDumpTitle": "確認匯入資料庫備份？", "importDumpDesc": "將把備份「{{dump}}」匯入資料庫「{{db}}」。", "import": "匯入", "importOk": "匯入完成", "importFailed": "匯入失敗", "deleteDbTitle": "移除控制面登記（不會 DROP 伺服器上的資料庫）", "deleteDbDesc": "僅移除控制面紀錄，不會自動刪除伺服器上的資料庫。", "deleteUserTitle": "刪除用戶登記？", "deleteUserDesc": "僅移除控制面紀錄。", "adminerTitle": "Adminer 資料庫瀏覽器", "adminerDesc": "下載輕量 Adminer，並寫入 Nginx 管理設定檔；「套用到系統」後才會檢查設定並重新載入 Nginx。", "adminerWritten": "Adminer 已寫入管理檔", "adminerApplied": "Adminer 套用完成", "writeOnly": "只寫入", "applyToSystem": "套用到系統", "adminerRisk": "公開 Adminer 有安全風險 — 請先限制來源 IP 或加上 HTTP 認證。需要 PHP 處理程序通訊端（預設 php8.2）。", "vhostName": "虛擬主機名", "vhostHint": "DNS A 指到此主機後才能從外網開", "downloadAdminer": "下載 Adminer（需要系統變更權限及外網）", "downloadAdminerDesc": "關閉則只使用已下載的檔案", "adminerWriteHint": "「只寫入」僅更新管理檔；「套用到系統」會複製設定、檢查 Nginx 並重新載入（需要管理員權限，否則會封鎖）。", "pgInstallBanner": "請先使用上方橫幅一鍵安裝 PostgreSQL", "pgEmptyCreateHint": "建立後按「套用到系統」寫入伺服器", "pgNoDbs": "尚未有 PostgreSQL 庫", "pgCreateTitle": "建立 PostgreSQL 資料庫", "pgCreateDesc": "寫入控制面登記；需再「套用到系統」才 建立資料庫（套用後才上線）", "pgAlsoCreateRole": "同時建立角色", "pgAlsoCreateRoleDesc": "一併建立登入角色並授予此資料庫權限", "roleName": "角色名稱", "roleHint": "PostgreSQL role／登入用戶", "pgDeleteDbDesc": "移除控制面紀錄（不會自動刪除伺服器上的資料庫，除非另行套用撤銷）。", "update": "更新", "alsoCreateRole": "同時建立角色", "cluster": { "standaloneOtherEngines": "此引擎目前是單機。其他引擎已有叢集：{{names}}。", "roleUnassigned": "未指派角色", "title": "叢集", "description": "計劃 → 寫管理檔 → 套用 → 探測 → 分發到對等節點／機群。預設預覽試行（不會重啟引擎）。", "redirectedFromCluster": "你由 /cluster 轉到此處。這是資料庫叢集分頁。", "notApplied": "尚未套用", "plannedAt": "建立於 {{when}}", "clearStalePlans": "清過期計劃", "clearStalePlansTitle": "刪除過期計劃？", "clearStalePlansDesc": "將刪除 {{n}} 個超過 7 日的計劃／草稿登記。不會套用或推送，亦不改系統設定。", "landingTitle": "資料庫叢集", "landingDesc": "本機已計劃與已套用的資料庫叢集總覽。請開啟引擎頁建立或套用。", "landingNoneInstalled": "未安裝 MySQL、MariaDB、PostgreSQL 或 Redis。請先安裝其中一個引擎。", "openEngine": "開啟 {{engine}}", "overviewPill": "叢集 {{n}}", "enginesInstalled": "引擎", "plannedCount": "已計劃", "overviewList": "叢集（{{count}}）", "overviewEmpty": "尚未有叢集登記。", "engine": "引擎", "kind": "類型", "members": "成員", "kindGalera": "簡易 Galera", "kindMysqlReplica": "MySQL 主從複製", "kindPgReplica": "PostgreSQL 串流複製", "kindRedisReplica": "Redis 主從", "createGalera": "建立簡易 Galera", "createMysqlReplica": "建立主從複製", "createPgReplica": "建立串流複製", "createSentinel": "建立 哨兵", "createRedisReplica": "建立 Redis 主從", "needRealIps": "請填寫本機與 對等節點 真實 IP／主機名", "hostInvalid": "請填寫有效的 IPv4、IPv6 或主機名。", "statusNote": "狀態：{{status}}（計劃成功 ≠ 叢集健康）", "artifactNote": "產物：{{dir}}", "planGenerated": "已產生計劃（預覽試行）", "planUpdated": "已更新計劃", "manageWritten": "已寫管理檔（預覽試行）", "bootstrapTried": "已嘗試 初始化", "applyTried": "已嘗試套用系統 設定檔", "localOk": "本機 成功", "localProbeFail": "本機 探測 未過", "probedWithPeers": "已探測（含 對等節點）", "probedLocal": "已探測本機", "peerTarNote": "已下載對等節點打包檔（.封存.gz）— 請解壓後在對等節點安裝設定檔", "downloaded": "已下載", "peerPushed": "已推送 對等節點", "pushPlanGenerated": "已產生 推送 計劃", "registrationDeleted": "已刪除登記", "nodes": "節點", "remoteInstallPlan": "遠端安裝計劃", "fleetSession": "機群 agent session id", "fleetSessionHint": "可選。從已登記機群工作階段選擇（用機群，不用 SSH）。留空則 scp。", "fleetSessionPh": "Agents 頁的 session UUID", "fleetSessionNone": "無 — 用 SSH", "fleetSessionOpenAgents": "前往 /agents 登記工作階段", "createWizardTitle": "開啟計劃精靈。需要本機 IP 與至少一個對等節點。只寫面板產物（預覽試行），套用前不會重啟引擎。", "bootstrap": "初始化（Bootstrap）", "fleetApply": "機群套用", "planTitle": "重新產生叢集計劃（不改主機）", "writeFileTitle": "把管理檔寫入面板資料目錄（預覽試行）", "probeLocalTitle": "只探測本機", "probeAllTitle": "探測所有已登記節點", "bootstrapTitle": "安裝本機 drop-in 並初始化首個節點", "remoteInstallPlanTitle": "預覽遠端安裝（不執行）", "downloadBundleTitle": "下載對等節點設定打包（.tar.gz）", "pushPlanTitle": "預覽推送到對等節點（不 scp）", "fleetSyncPlanTitle": "預覽機群同步（不執行）", "fleetApplyTitle": "把套用排入機群成員？", "status": { "healthy": "健康", "planned": "已計劃", "partial": "部分", "failed": "失敗", "draft": "草稿", "degraded": "降級", "applied": "已套用" }, "fleetSyncPlan": "機群同步計劃", "standaloneTitle": "目前：單機", "standaloneRepl": "未登記主從／串流。指定主節點與從節點後產生設定檔與腳本。", "standaloneHa": "未登記 HA。加入至少一個對等節點，產生設定檔計劃，然後 bootstrap 首個節點，其餘節點再 join。", "recentProbe": "最近 探測（本機 wsrep）", "probeRequired": "healthy 必須 探測 通過", "planPreview": "計劃預覽", "planPreviewDesc": "預覽試行 · 成功只代表步驟/設定檔 已生成", "files": "檔案", "systemChangeNeed": "套用時需要", "planModalDesc": "選擇節點後產生計劃（不會自動修改對等節點系統）", "generatePlan": "產生計劃", "clusterName": "叢集名稱", "localIp": "本機 IP／主機", "primaryIpHint": "控制面所在機（主節點/主節點 + 本機存取）", "localIpHint": "控制面所在機（本機存取）", "ipExample1": "例如 10.0.0.1", "ipExample2": "例如 10.0.0.2", "ipExample3": "例如 10.0.0.3", "replicaIp": "從節點 IP／主機", "peerIp": "對等節點 IP／主機", "replicaHint": "從庫節點", "peerHint": "第二節點（Galera 建議 3 節點）", "thirdNode": "第 3 節點（可選）", "thirdNodeHint": "Galera / 多 從節點 建議填", "sstMethod": "SST 方式", "forbidDemoIp": "禁止示範 IP（203.0.113.x）。", "fwGalera": "防火牆內網開 3306 / 4567 / 4444 / 4568。", "fwPg": "串流需內網 5432；腳本密碼改 請自行更改。", "fwRedis": "Redis 內網 6379（哨兵 26379）。", "fwRepl": "主從需內網對應埠；腳本密碼改 請自行更改。", "needExecuteRoot": "套用系統 設定檔 需 系統變更權限已開啟 與管理員權限。", "topology": "拓撲：{{kind}}", "applyLocalTitle": "套用本機系統 設定檔？", "applyBootstrapDesc": "會安裝 Galera drop-in 並 初始化（galera_new_cluster）。僅第一個節點用一次。", "applyJoinDesc": "會安裝 Galera drop-in 並 系統控制 重新啟動 mariadb。需 系統變更權限已開啟 與管理員權限。首節點請改用「初始化」。", "confirmApply": "確認套用", "deleteClusterTitle": "刪除叢集登記「{{name}}」（{{engine}}）？", "remoteInstallTitle": "遠端安裝 對等節點？", "pushTitle": "推送 到 對等節點？", "fleetSyncTitle": "機群 同步？", "confirmOp": "確認操作", "deleteClusterDesc": "將刪除 {{engine}} 叢集「{{name}}」的登記。系統設定檔不會自動清除（第一版）。", "remoteInstallDesc": "在對等節點安裝設定檔並重新啟動服務。需要系統變更權限及遠端登入金鑰。", "pushDesc": "將檔案複製到對等節點暫存目錄？需要系統變更權限及金鑰。成功並不代表對等節點已重新啟動。", "fleetSyncDesc": "同步 叢集 快照到 機群 邊緣，再可 套用。", "fleetApplyDesc": "enqueue 套用 到 機群 成員。", "remoteInstalled": "遠端已安裝", "fleetSynced": "機群 已同步排隊", "fleetApplyQueued": "機群 套用 已排隊", "plan": "計劃", "writeFile": "寫檔", "applyLocal": "套用本機", "probeAll": "全節點探測", "remoteInstall": "遠端安裝", "downloadBundle": "下載包", "pushPlan": "推送 計劃", "pushExecute": "推送 執行", "fleetSync": "機群 同步", "localConfPreview": "本機 設定檔 預覽", "refresh": "重新整理", "close": "關閉", "cancel": "取消", "delete": "刪除", "probe": "探測", "name": "名稱", "type": "類型", "engineNotInstalled": "此主機未安裝 {{engine}} — 請先安裝，或改用實際運行的引擎。" }, "console": { "dataBrowse": "資料瀏覽", "dbManage": "資料庫管理", "realtime": "即時", "reload": "重載", "needRestart": "需重啟", "affectsProjects": "使用此引擎的站點與服務會中斷。", "lifecycle": "生命週期", "overview": "概覽", "actionDone": "已{{action}}", "installDone": "安裝完成", "noChanges": "沒有變更可套用", "settingsApplied": "設定已套用", "notReadFromService": "未從服務讀取", "applyMode": "套用方式：{{mode}}", "dirtyNotApplied": "已修改，尚未套用", "highRisk": "高風險設定", "engine": "引擎", "bootEnabled": "開機自啟", "uptimeSec": "運行秒數", "currentConnections": "目前連線", "changes": "變更", "serviceTitle": "{{title}} 服務", "softwareMissing": "{{title}} 所需軟件尚未安裝", "overviewDesc": "唯讀資訊，由探測取得（非輸入欄）", "lifecycleDesc": "安裝、啟動、停止與開機自啟", "about": "說明", "cluster": "叢集", "noSettings": "此分類暫無可用設定（或目前版本不支援）", "applyHint": "「即時」可在線修改；「需重啟」套用後請到「生命週期」重新啟動服務。藍色底為尚未套用的變更。", "applyCategory": "套用本分類", "applyAll": "套用全部變更", "applyCatCount": "套用本分類（{{n}}）", "applyAllCount": "套用全部變更（{{n}}）", "lifecycleNote": "設定分頁中，「即時」可在線修改；「需重啟」套用後請到生命週期重啟服務。", "installEngine": "請使用上方橫幅的「一鍵安裝」安裝 {{title}}。", "reloadConfig": "重載設定", "disableBoot": "取消自啟", "disableBootConfirm": "重啟後引擎不會自動啟動，直至你再次啟用。", "needRights": "需要系統變更權限與管理員身分。失敗時會顯示原因，不會假裝成功。", "noneFetched": "— 未能取得 —" }, "importEntry": "入口: {{url}}", "adminerRiskFull": "公開 Adminer 有安全風險 — 請先限制來源 IP 或加上 HTTP 認證。需要 PHP 處理程序通訊端（預設 php8.2）。", "adminerWriteHintFull": "「只寫入」僅更新管理檔；「套用到系統」會複製設定、檢查 Nginx 並重新載入（需要管理員權限，否則會封鎖）。", "pgInstalled": "PostgreSQL 已安裝", "pgStarted": "PostgreSQL 已啟動", "notInstalledShort": "未裝", "serviceConsole": "服務控制台", "installPgFirst": "請先安裝 PostgreSQL", "pgSoftwareMissing": "PostgreSQL 所需軟件尚未安裝", "installPgBanner": "請使用上方橫幅「一鍵安裝」安裝 PostgreSQL。", "createPlus": "+ 建立", "dbNameHintPg": "小寫英數與底線；建立後請再套用到系統", "deleteNotePg": "刪除登記不會自動 刪除 伺服器上的庫；套用成功才代表主機已執行 資料定義。", "tabDatabasesSimple": "資料庫 ({{count}})", "frozenTitle": "資料庫服務需要修復", "frozenBody": "已偵測到問題（模式／凍結：{{mode}}；資料目錄為空：{{empty}}）。系統會按健康檢查結果產生修復計劃，不會只針對單一錯誤硬編碼。", "unfreezeBtn": "檢查並修復服務", "unfreezeConfirmTitle": "確認修復 {{engine}}？", "unfreezeConfirmDesc": "將按診斷結果執行通用修復計劃（停止服務、清除凍結、清理錯誤引擎設定、空白目錄初始化、再啟動）。資料目錄是否為空：{{empty}}。若有重要資料請先備份。", "unfreezeConfirmBtn": "確認修復", "unfreezeOk": "{{engine}} 修復完成", "startAfterUnfreeze": "啟動服務（失敗時會自動套用修復計劃）", "serviceDownTitle": "資料庫服務未運作", "serviceDownBody": "服務異常。面板會診斷常見原因（凍結、設定殘留、空白資料目錄、埠衝突等）。資料目錄為空：{{empty}}。請按「檢查並修復服務」確認執行。", "adoptHostDb": "登記到控制面（不建立）：{{name}}", "adoptHostDbTitle": "只在控制面登記名稱，不改主機資料", "cleanupExpiredTempUsersTitle": "清除已過期的面板臨時用戶", "invalidSqlIdent": "請用小寫識別名稱：以英文字母開頭，其後可為字母、數字或底線。", "remoteHostRequired": "請填寫遠端主機。", "remoteTestUnsaved": "請先儲存此主機，再按「測試連線」。或填好主機後儲存。", "serverNotInstalled": "伺服器未安裝", "dumpNeedEngine": "請先安裝資料庫引擎，才可匯出資料庫。", "unboundDatabase": "資料庫登記已移除", "userGoneRefresh": "該用戶已不存在，已重新整理列表。" }, "dialogs": { "confirmDefault": "確認", "cancelDefault": "取消", "severity": { "consequencesTitle": "將會發生：", "typeToConfirm": "請輸入「{{text}}」以確認" } }, "dns": { "templates": { "minimal": "最小 — 僅 apex A", "web": "網站 — apex + www", "mail": "郵件 — apex + mail + MX + SPF", "full": "完整 — 網站 + mail + ftp + SPF", "cdn": "CDN — apex + www + cdn（多 邊緣 預留）" }, "dnssecOk": "已產生 DNSSEC 金鑰（已寫入 — 未簽署 zone／未上 registrar）", "dnssecNotOk": "DNSSEC 未產生金鑰（只寫說明檔或工具不可用 — 不假成功）", "dnssecFailed": "DNSSEC 失敗", "blocked": "已封鎖（需系統變更權限）", "clusterDone": "完成（{{status}}）", "clusterPartial": "未全部成功（{{status}}）— 見下方明細", "clusterFailed": "叢集操作失敗", "validateFailed": "記錄驗證失敗", "validateRequestFailed": "驗證請求失敗", "lookupFailed": "查詢失敗", "statRecords": "紀錄", "statSelected": "選中", "notInstalled": "DNS 所需軟件尚未安裝", "dsForRegistrar": "DS（供 registrar，未自動發佈）：", "tabs": { "zones": "區域", "records": "記錄", "cluster": "叢集", "dnssec": "DNSSEC", "tools": "工具", "ddns": "DDNS", "about": "說明" }, "recentWrite": "最近寫入結果", "zonesTitle": "區域 ({{count}})", "zonesDesc": "建立區域後可寫入／套用 zone", "createZone": "+ 建立區域", "mailZonesMissing": "電郵網域尚未建立 DNS 區域：{{domains}}。", "createMailZone": "建立郵件區域", "colZoneName": "區域名稱", "colServerIp": "伺服器 IP", "colTemplate": "模板", "colStatus": "狀態", "emptyZonesTitle": "尚未有 DNS 區域", "emptyZonesDesc": "用列表右上角「建立區域」新增", "applyZoneTitle": "寫入 zone 檔並掛入 PowerDNS named.conf + rediscover（寫檔≠已答 dig）", "applyZone": "寫入／套用", "recordsFor": "記錄 — {{zone}}", "recordsNeedSelect": "記錄（請先在「區域」選取）", "statusLabel": "狀態", "addRecord": "+ 新增記錄", "writeZoneFile": "寫入並載入區域", "healthLoaded": "已載入", "stateLoaded": "已載入", "healthPublicNs": "公網 NS", "statePublicNs": "公網 NS", "publicNsHere": "→ 本機", "requestLeTitle": "申請 {{zone}} Let’s Encrypt", "requestZoneSsl": "申請本區域 SSL", "soaTitle": "SOA / 預設 TTL", "soaDesc": "寫入 zone 檔時的 SOA 名稱伺服器與 $TTL；儲存後請再「寫入區域檔」才落到磁碟", "soaBlockNs": "名稱伺服器", "soaBlockTiming": "TTL 與定時", "recordsListTitle": "DNS 記錄（{{count}}）", "recordsListDesc": "編輯後記得按上方「寫入區域檔」才會更新 named 磁碟檔。", "soaNsLabel": "SOA 名稱伺服器", "soaNsHint": "可留空 → 預設 ns1.區域.", "defaultTtl": "預設 TTL（秒）", "min1": "1 分", "min5": "5 分", "min10": "10 分", "hour1": "1 時", "day1": "1 日", "customSeconds": "自訂秒數", "soaSaved": "已儲存 SOA 設定（控制面）— 請「寫入區域檔」套用", "soaSaveFailed": "儲存 SOA 失敗", "soaSavedAndWritten": "已儲存並寫入區域檔", "soaWriteFailed": "SOA 寫入失敗", "failed": "失敗", "colType": "類型", "colName": "名稱", "colValue": "值", "emptyRecords": "尚無記錄", "noZoneSelectedTitle": "尚未選擇區域", "noZoneSelectedDesc": "到「區域」分頁點選一個 zone", "clusterTitle": "DNS 叢集", "clusterDesc": "安全複製 推送 zone 檔後可 remote 重新載入（rndc / named / bind9 / pdns）。已寫入 ≠ 已套用。", "peerHost": "對等節點 主機", "peerHostHint": "次要 NS 主機名稱或 IP（需 遠端登入 金鑰登入）", "sshUser": "遠端登入 用戶", "sshUserHint": "需有目標路徑寫入與 重新載入 權限", "labelOptional": "標籤（可選）", "labelPlaceholder": "例如 ns2 / hkg-邊緣-dns", "opPerPeer": "本次操作（每 對等節點）", "registeredPeers": "已登記 peers（{{count}}）", "lastProbeHint": "lastProbe 於「探活」或推送後更新", "noPeers": "尚未登記任何 對等節點", "zoneDirMissing": "· zone 目錄缺失", "generateKeys": "產生金鑰；不自動上線", "selectZoneFirst": "請先選擇區域", "lookupTitle": "DNS 查詢（dig）", "lookupDesc": "對公網解析器查詢；用於驗證 multi-A / CDN 是否生效。不假造答案。", "lookupNamePlaceholder": "例如 example.com 或 www.example.com", "lookupType": "查詢類型", "lookupResults": "查詢結果（{{count}} 筆）", "lookupNoAnswerFail": "查詢無答案／失敗", "digNotInstalled": "dig 未安裝", "digNotInstalledHint": "此分頁需要 dig（bind9-dnsutils）。這不是 NXDOMAIN。請在主機用套件管理安裝 bind9-dnsutils；本頁不會自動安裝。", "method": "方法：{{method}}", "noAnswers": "沒有答案", "noAnswersDesc": "NXDOMAIN、空 RRset 或解析失敗", "lookupOkHint": "以上為即時查詢結果。CDN multi-A 應看到多個 IP；健康摘除後應減少。", "lookupFailHint": "查詢失敗或無答案。請確認名稱、類型與上游解析器。", "validateTitle": "記錄驗證", "validateDesc": "新增／編輯時自動驗證（CNAME 衝突、A/AAAA 格式等）。", "createZoneTitle": "建立 DNS 區域", "createZoneDesc": "依模板產生記錄", "createZoneNeedValid": "請輸入有效的區域名稱與 IPv4 位址", "zoneNameHint": "例如 example.com（不含結尾點）", "invalidZone": "區域名稱無效。請用合法域名（例如 example.com）。", "invalidIpv4": "IPv4 無效。每個欄位須為 0–255。", "serverIpv4": "伺服器 IPv4", "serverIpv4Hint": "模板 A 記錄使用的位址", "thisHostIpv4": "此主機公網 IPv4", "serverIpv6Optional": "伺服器 IPv6（可選）", "serverIpv6Hint": "有公網 v6 時寫入 AAAA；可留空", "thisHostIpv6": "此主機公網 IPv6（可留空）", "soaNsCreateHint": "可留空，預設 ns1.區域名稱", "defaultTtlLabel": "預設 TTL", "defaultTtlHint": "SOA 與新記錄預設", "recordTemplate": "記錄模板", "editRecord": "編輯記錄", "addRecordTitle": "新增記錄", "recordModalDesc": "區域 {{zone}} · 儲存後需再寫入區域檔", "recordType": "DNS 記錄類型", "nameHint": "@ = 根網域；www = 子網域", "mxPlaceholder": "例如 10 mail.example.com.", "spfPlaceholder": "例如 v=spf1 a mx ip4:… ip6:… ~all", "needIpv6": "請填 IPv6 位址", "needIpv4": "請填 IPv4 位址", "valueHint": "IP、主機名或對應內容", "ipv6Address": "IPv6 位址", "ipv4Address": "IPv4 位址", "cacheTime": "快取時間", "deleteZoneTitle": "刪除區域？", "deleteZoneDesc": "會一併刪除其 DNS 記錄登記。", "deleteRecordTitle": "刪除記錄？", "deleteRecordDesc": "移除後請寫入區域檔", "addPeer": "新增 對等節點", "probe": "探活", "pushZones": "推送 zones", "reloadRemote": "remote reload", "generateDnssec": "產生 DNSSEC 金鑰", "lookup": "查詢", "saveSoa": "儲存 SOA", "saveSoaAndWrite": "儲存並寫入區域檔", "saveSoaSettings": "儲存 SOA 設定", "saveSoaAndWriteBtn": "儲存並寫入區域檔", "goToZones": "前往區域", "refresh": "重新整理", "pushReload": "推送 + 重新載入", "pushOnly": "僅推送（不 重新載入）", "reloadOnly": "僅 remote 重新載入", "probePeers": "探活 peers", "clusterDefaultHint": "預設推送後在對等節點重新載入 DNS；需本機已開啟系統變更權限。", "notProbed": "尚未探活", "probeHealthy": "探活：{{status}}", "pushReloadShort": "推送+重新載入", "dnssecCardDesc": "產生金鑰／DS；若 dataDir 有 zone 檔會嘗試 dnssec-signzone。DS 不會自動上 registrar。", "currentZone": "目前區域：", "generateAndSign": "產生金鑰並嘗試簽署 zone", "lookupName": "名稱", "fillCurrentZone": "填入目前區域", "lookupToolHint": "優先使用主機上的 dig；若無 dig 則 fallback 至 node dns。結果反映查詢當下解析器所見，不等於 面板 內記錄。", "validateExtra": "error 會擋儲存；warn（如 apex CNAME）只提示。", "createAfterHint": "建立後請在「記錄」分頁檢視並「寫入區域檔」才會落到磁碟。", "valueLabel": "值", "ttlHint": "快取時間", "soaSavedControl": "已儲存 SOA 設定（控制面）— 請「寫入區域檔」套用", "soaNs2Label": "次要 NS（可選）", "soaNs2Hint": "第二名稱伺服器 FQDN，例如 ns2.example.com.", "soaHostmaster": "SOA 管理員電郵（RNAME）", "soaHostmasterHint": "用點代替 @，例如 hostmaster.example.com.", "soaRefresh": "Refresh（秒）", "soaRetry": "Retry（秒）", "soaExpire": "Expire（秒）", "soaMinimum": "Minimum／負快取 TTL（秒）", "soaTimingHint": "SOA 定時參數（秒）。", "healthTitle": "DNS 服務健康", "healthDesc": "主機真實狀態：服務 / 埠 53 / 已寫入 zone 檔 / 本機 dig 是否有回應（寫入 ≠ 已 reload ≠ 對外 answering）", "healthPillOk": "DNS 正常", "healthPillBad": "DNS 異常", "healthService": "服務", "healthServiceDown": "未運行", "healthListen": "埠 53", "healthWritten": "zone 檔", "healthAnswering": "本機回應", "healthAnsweringYes": "有", "healthAnsweringNo": "無／拒絕", "healthRefresh": "重新探測", "healthProbeLocal": "再探測健康", "healthOpen53": "開放防火牆 53（TCP+UDP）", "healthOpened53": "已請求開放 53 TCP+UDP", "healthOpen53Failed": "開放 53 失敗", "healthPortClosed": "未聽 53", "healthPortOpenAlready": "53 似已在聽", "healthHint": "dig 被拒時，請先修復 PowerDNS、開放 53，再寫入 zone。", "stateService": "服務", "stateListen": "聽埠", "stateWritten": "已寫入", "stateAnswering": "本機 answering", "lookupServer": "查詢伺服器（@）", "lookupServerHint": "127.0.0.1 = 本機權威；公網 IP 測對外；留空用系統 resolver", "healthHealPdns": "修復 PowerDNS 綁定", "healNeedInstall": "尚未安裝 PowerDNS — 請先到軟件分頁安裝", "applyNeedService": "DNS 服務未運行 — 請先啟動或安裝再寫入／套用", "goStartService": "去啟動 DNS 服務", "startBindHint": "若啟動後仍未監聽，多半是 53 埠被 systemd-resolved 佔用。請先按下方「修復綁定」再啟動。", "deleteZoneNeedName": "刪除此區域 — 需輸入區域名稱確認", "healthHealPdnsHint": "將 local-address 設為公網 IP，避免同 systemd-resolved 搶 0.0.0.0:53", "healthHealPdnsOk": "PowerDNS 已綁 {{ip}} 並嘗試啟動", "healthHealPdnsFailed": "PowerDNS 修復失敗", "startProbeFailed": "啟動後無法再探測 DNS 健康", "startNotListening": "PowerDNS 啟動已回報，但 53 埠未在答", "aboutTitle": "DNS 使用要點", "aboutSub": "區域為主；記錄／叢集／DNSSEC 要先選域名。", "aboutZonesTitle": "區域與域名範圍", "aboutZonesBody": "先在「區域」選域名，再管理該域名的記錄、叢集、DNSSEC。", "aboutHealthTitle": "服務健康", "aboutHealthBody": "在「工具」探測 PowerDNS、修復綁定、開放 53 埠。", "aboutStackTitle": "軟件版本", "aboutStackBody": "在「軟件」檢查／更新 PowerDNS 套件。", "aboutDdnsTitle": "DDNS", "aboutDdnsBody": "DDNS 分頁在本機 WAN 位址變更時更新指定的 A／AAAA。它不取代區域記錄編輯。寫入並不等於公網解析已生效。", "ddns": { "honesty": "寫入成功並非公網 DNS 已傳播。解析快取與 registrar NS 仍然有效。空白或私網 IP 不會發布。", "needExecute": "供應商更新需要 root 與 YSK_EXECUTE=1。探測仍會執行。", "lastRun": "上次執行", "nextRun": "下次執行", "wanRemembered": "已記住的 WAN IPv4", "updateNow": "立即更新", "updateTitle": "發布偵測到的 WAN 位址？", "updateDesc": "會對每筆已啟用記錄呼叫 Cloudflare、nsupdate 或本機 zone，即使位址未變更。請輸入 UPDATE 確認。", "updated": "DDNS 更新完成", "updateFailed": "DDNS 更新失敗", "probe": "探測 WAN", "probed": "WAN 探測完成", "probeFailedUi": "WAN 探測失敗", "forceHint": "「立即更新」即使位址未變更也會再發布。探測不會呼叫供應商。", "saved": "已儲存", "saveFailed": "無法儲存", "deleted": "已移除記錄", "emptyTitle": "尚未有 DDNS 記錄", "emptyDesc": "在下方新增主機名稱。可選 Cloudflare、RFC 2136，或本機 PowerDNS（managedBy=ddns）。", "colFqdn": "主機名稱", "colProvider": "供應商", "colPublished": "已發布", "colEnabled": "狀態", "colFrom": "由", "colTo": "至", "colWhen": "時間", "colNote": "備註", "pauseRecord": "暫停", "resumeRecord": "恢復", "statusCard": "WAN 狀態", "recordsCard": "主機名稱", "addCard": "新增主機名稱", "settingsCard": "設定", "historyTitle": "近期更新", "historyEmpty": "尚無 DDNS 紀錄", "paused": "排程已暫停", "pausedHint": "自動更新已關閉。探測與「立即更新」仍可執行。", "schedulerOn": "自動更新", "schedulerOnHint": "行程內排程，不是 crontab。關閉後不會自動 upsert。", "zone": "區域", "zoneHint": "留空則使用主機名稱最後兩段。本機供應商應選擇已存在的區域。", "zoneSelectHint": "本機已有區域。Cloudflare 與 RFC 2136 可用任意區域名稱。", "noLocalZones": "尚無本機區域。若使用本機 PowerDNS，請先在「區域」分頁建立。", "providerLocal": "本機 PowerDNS", "proxied": "Cloudflare proxied", "proxiedHint": "Orange cloud。VPN／WireGuard 主機名稱請關閉。", "proxiedWarnTitle": "使用 Cloudflare orange cloud？", "proxiedWarnDesc": "Proxied 記錄會隱藏來源 IP。VPN 與 WireGuard 主機名稱應維持 DNS only。請輸入 PROXY 確認。", "addRecord": "新增主機名稱", "interval": "間隔（秒）", "intervalHint": "60–86400。行程內排程，不是 crontab。", "cfToken": "Cloudflare API token", "cfTokenHint": "只寫不回顯。若已設環境變數 CF_API_TOKEN 則使用該值。", "tokenConfigured": "已儲存 Cloudflare token。留空則保持原值。", "tokenMissing": "尚未儲存 Cloudflare token（仍可使用環境變數 CF_API_TOKEN）。", "rfcServer": "RFC 2136 伺服器", "rfcServerHint": "遠端伺服器需要資料目錄內的 TSIG key file。Loopback 可以不簽名。密鑰不會放進 argv。", "rfcKeyFile": "TSIG key file", "rfcKeyFileHint": "相對於 DDNS 資料目錄，或資料目錄下的絕對路徑。", "rfcKeyConfigured": "已儲存 key file 路徑。留空則保持原值。", "primaryFqdn": "主要主機名稱", "primaryFqdnHint": "作為 VPN Endpoint 提示。不會改寫現有 peers。", "updateIdentity": "記住 WAN IPv4", "updateIdentityHint": "把上次公網 IPv4 存入 DDNS 狀態", "vpnHint": "VPN Endpoint 可用 DDNS 主機名稱（不會自動改寫現有設定）。", "sslHint": "Let's Encrypt HTTP-01 需要主機名稱解析到本機。IP 變更後不會自動重簽憑證。", "deleteTitle": "移除 DDNS 主機名稱？", "deleteDesc": "請輸入 {{fqdn}} 確認。不會刪除 zone 編輯器裡的本機記錄。", "err": { "requiresExecute": "發布需要 root 與 YSK_EXECUTE=1。", "missingToken": "缺少 Cloudflare API token。", "rfc2136NeedKey": "遠端 RFC 2136 需要資料目錄內的 TSIG key file。", "rfc2136KeyMissing": "TSIG key file 不存在，或不在資料目錄內。", "noPublicIpv4": "未偵測到公網 IPv4。", "noPublicIpv6": "未偵測到公網 IPv6。", "notPublicIpv4": "偵測到的 IPv4 不是公網位址。", "notPublicIpv6": "偵測到的 IPv6 不是公網位址。", "probeFailed": "公網 IP 探測失敗。", "localNoZone": "此主機名稱沒有對應的本機 DNS 區域。", "localNeedsDb": "本機供應商需要控制平面資料庫。", "managedByClash": "該名稱由其他功能擁有（不是 DDNS）。", "unknownProvider": "未知的 DDNS 供應商。", "nsupdateFailed": "nsupdate 失敗。", "updateFailed": "供應商更新失敗。", "invalidFqdn": "主機名稱無效。", "invalidType": "類型必須為 A 或 AAAA。", "invalidProvider": "未知供應商。", "notFound": "找不到記錄。", "confirmMismatch": "確認內容必須與主機名稱相同。", "schedulerDisabled": "DDNS 排程已暫停。", "provider": "供應商回傳錯誤。" } }, "createMailZoneNow": "已建立郵件區域 {{domain}}", "toolsFirewallTitle": "防火牆（UFW）", "toolsFirewallHint": "允許或拒絕 53 埠。不會啟動或停止 PowerDNS。", "toolsUnitTitle": "PowerDNS 服務單元", "toolsUnitHint": "systemd 單元 pdns — 啟動、停止、重啟、重載。", "installConfirmTitle": "安裝 PowerDNS？", "installConfirmDesc": "會安裝 pdns-server 並寫入受管權威設定。需要 root 與 YSK_EXECUTE=1。", "installConfirmConsequence": "安裝並啟動後，PowerDNS 會綁定 53 埠。", "installPort53Busy": "53 埠已有程序在聽。未停止或修復該聽埠前，PowerDNS 可能無法綁定。", "installPort53BusyConsequence": "請先修復綁定或停止其他聽埠，才可預期 53 埠有回應。" }, "docker": { "title": "Docker", "subtitle": "在這部伺服器安裝 Docker Engine，並管理容器、映像、Volume 與驗證者 Compose 堆疊。", "refresh": "重新整理", "notInstalled": "未安裝 Docker Engine。請在這頁安裝 docker.io 及 docker-compose-v2。", "protected": "受保護", "pruneConfirm": "輸入 PRUNE 以確認任何清理", "needEngineTitle": "請先安裝 Docker Engine", "stopEngineDesc": "會停止 Docker 引擎及本機全部 {{n}} 個容器。", "notInstalledValue": "未安裝", "nameHint": "字母、數字、底線、點、連字號（最長 128）", "volPlaceholder": "my-data", "netPlaceholder": "my-net", "runPorts": "發佈埠", "runPortsHint": "每行 host:container，例如 8080:80", "runEnv": "環境變數", "runEnvHint": "每行 KEY=value", "runRestart": "重啟政策", "runNetwork": "網絡", "runVolumes": "Volume", "runVolumesHint": "每行 volume:dest", "runAdvancedHint": "多服務堆疊請用驗證者節點，或主機上已有的 Compose 檔。", "daemonConfirmTitle": "套用引擎設定？", "daemonConfirmDesc": "會寫入 daemon.json 並重啟 docker.service。所有容器都會中斷。", "settingsHint": "只開放安全的 daemon.json 選項。套用會寫入檔案並重啟 docker.service。", "cli": { "usage": "用法：ysk-server docker status|ps|images|volumes|networks|df|logs|inspect|exec|start|stop|restart|rm|pull|run|prune|engine|compose [--image IMG] [--name N] [--preset version|help|hostname] [--bin BIN] [--project P] [--execute] [--json]" }, "tab": { "overview": "概覽", "containers": "容器", "images": "映像", "compose": "Compose", "volumes": "Volume", "networks": "網絡", "prune": "清理", "settings": "設定", "about": "說明" }, "col": { "engine": "引擎", "containers": "容器", "version": "版本", "dataRoot": "資料目錄", "disk": "磁碟", "validators": "驗證者堆疊", "name": "名稱", "image": "映像", "status": "狀態", "ports": "埠", "managed": "由面板管理", "size": "大小", "driver": "驅動", "type": "類型", "reclaimable": "可回收" }, "state": { "up": "運行中", "down": "已停止", "running": "運行中", "exited": "已結束", "exitedCode": "已結束（{{n}}）", "restarting": "重啟中", "restartingCount": "重啟中 · {{n}} 次", "paused": "已暫停", "created": "已建立", "dead": "已失效", "removing": "刪除中", "unknown": "未知" }, "df": { "images": "映像", "containers": "容器", "volumes": "本機 volume", "builder": "建置快取", "other": "其他" }, "actions": { "start": "啟動", "stop": "停止", "restart": "重啟", "remove": "刪除", "logs": "日誌", "inspect": "檢查", "exec": "執行（version）", "run": "執行映像", "pull": "拉取", "up": "啟動", "down": "停止", "createVolume": "建立 volume", "createNetwork": "建立網絡", "pruneContainers": "清理容器", "pruneImages": "清理映像", "pruneVolumes": "清理 volume", "pruneSystem": "系統清理", "startEngine": "啟動引擎", "stopEngine": "停止引擎", "restartEngine": "重啟引擎", "applyDaemon": "套用引擎設定" }, "empty": { "containers": "未有容器", "images": "未有映像", "compose": "未有 Compose 專案", "composeDesc": "專案來自驗證者節點或主機上已有的 Compose 檔。本頁不接受任意上載 YAML。", "composeCta": "開啟驗證者節點", "volumes": "未有 volume", "networks": "未有網絡" }, "logs": { "empty": "沒有日誌輸出。", "follow": "跟隨" }, "deleteRunningWarn": "此容器仍在運行或重啟中，刪除會強制移除。", "settings": { "logMaxSize": "容器日誌上限", "liveRestore": "即時還原（引擎重啟時保留容器）", "mirrors": "Registry 來源（每行一個網址）", "insecure": "未加密 Registry（每行一個主機）" }, "about": { "body": "Docker 是 YSK Server 的一級主機服務，與 Nginx 同級。由面板用 Ubuntu docker.io + docker-compose-v2 安裝。驗證者節點以 yskval-* Compose 專案運行。", "honesty": "變更主機需要 root 及 YSK_EXECUTE=1。預設是試行。本頁管理單機 Docker；叢集編排請用外部 Kubernetes。", "validators": "開啟驗證者節點" }, "alerts": { "daemonTitle": "Docker 引擎未運行", "daemonBody": "已安裝 Docker，但 docker.service 未啟動。驗證者堆疊無法啟動。" }, "errors": { "notInstalled": "未安裝 Docker", "daemonDown": "Docker 引擎未運行", "needCompose": "需要 docker compose（v2 外掛）", "badImage": "映像名稱無效", "badName": "名稱無效", "badPort": "埠對應無效", "badEnv": "環境變數無效", "badVolume": "磁碟掛載無效", "badNetwork": "網絡無效", "protectedNetwork": "不可以刪除內建 Docker 網絡", "badRestart": "重啟政策無效", "badPrune": "清理範圍無效", "needPruneConfirm": "清理 volume 或系統需要 confirm=PRUNE", "badDaemon": "引擎設定無效", "composeMissing": "找不到這個專案的 Compose 檔", "logsFailed": "讀不到容器日誌", "mutateFailed": "Docker 指令失敗", "engineFailed": "無法控制 docker.service", "badExec": "exec 只限允許清單內的二進制與預設（不可用 shell，不可開 TTY）", "uninstallBusy": "請先停止由面板管理的容器（包括驗證者堆疊）再卸載 Docker", "badCommand": "指令或 entrypoint 無效", "portBusy": "主機埠 {{bind}}:{{port}} 已被佔用", "nameInUse": "已有名稱為 {{name}} 的容器。請先刪除或改名。", "unpublished": "容器未掛上網絡或未發佈埠，不當成已啟動。" }, "notes": { "dryMutate": "此為試行。要改主機請加 --execute 及 YSK_EXECUTE=1。", "dryPrune": "清理預覽（未套用）。", "dryEngine": "引擎控制此為試行。", "dryDaemon": "會寫入 /etc/docker/daemon.json 並重啟 docker.service。", "daemonWrote": "已寫入 daemon.json", "start": "已啟動容器", "stop": "已停止容器", "restart": "已重啟容器", "remove": "已刪除容器", "ran": "已用映像啟動容器", "leftoverRemoved": "綁定失敗後已刪除殘留容器 {{name}}", "pulled": "已拉取映像", "exec": "已執行允許清單內的 exec", "imageRemoved": "已刪除映像", "volumeCreated": "已建立 volume", "volumeRemoved": "已刪除 volume", "networkCreated": "已建立網絡", "networkRemoved": "已刪除網絡", "pruned": "清理完成", "compose": { "up": "已啟動 Compose 專案", "down": "已停止 Compose 專案", "restart": "已重啟 Compose 專案", "rm": "已刪除 Compose 專案" }, "engine": { "start": "已啟動 docker.service", "stop": "已停止 docker.service", "restart": "已重啟 docker.service" } }, "ui": { "whatYouGet": "這頁可以做甚麼", "whatYouGetLead": "先安裝 Docker Engine。之後可以執行單一容器、拉取映像，並查看本機已有的驗證者 Compose 堆疊。", "capEngine": "引擎", "capEngineDesc": "一鍵安裝 docker.io 及 docker-compose-v2。可在這頁啟動或停止 docker.service。", "capWork": "容器與映像", "capWorkDesc": "選擇常用映像、拉取、執行，然後查看日誌或檢查容器。", "capStacks": "驗證者堆疊", "capStacksDesc": "多服務堆疊是驗證者 Compose 專案（yskval-*）。本頁不接受上載 YAML。", "cardEngine": "引擎", "cardDisk": "磁碟", "cardWork": "本機現況", "compose": "Compose", "cgroup": "cgroup", "used": "已用", "free": "可用", "running": "運行中", "images": "映像", "volumes": "Volume", "networks": "網絡", "goImages": "映像", "goValidators": "驗證者節點", "imagePickHint": "請選擇常用映像。只有需要其他參考名稱時，才選「其他」。", "imageCustom": "其他", "driver": "驅動", "driverLocalOnly": "本頁只建立 local volume。", "netDefaultDriver": "新建網絡使用 Docker 預設的 bridge 驅動。", "pruneWhat": "要清理甚麼", "pruneAck": "我明白未使用的資料會被刪除，而且無法還原", "pruneAckDesc": "清理 volume 或整個系統無法還原。會按所選範圍刪除已停止的容器與未使用的映像。", "pruneNow": "立即清理", "useMirrors": "使用 Registry 來源", "useInsecure": "允許未加密 Registry", "publishPorts": "向主機發佈埠", "attachVolume": "掛載 volume", "setEnv": "設定環境變數", "defaultNet": "預設", "mountPath": "掛載路徑", "restartNo": "永不", "restartUnless": "除非已停止", "restartAlways": "一律", "restartOnFail": "失敗時", "needAck": "清理前請先確認", "scopeContainers": "已停止的容器", "scopeImages": "未使用的映像", "scopeVolumes": "未使用的 volume", "scopeBuilder": "建置快取", "scopeSystem": "所有未使用項目", "noVolumesYet": "尚未有 volume — 請先到 Volume 分頁建立。", "command": "指令", "commandHint": "選填。映像之後的參數。留空則用映像 CMD。", "entrypoint": "Entrypoint", "entrypointHint": "選填單一程式。留空則用映像 ENTRYPOINT。", "portMap": "主機:容器", "portOccupied": "此主機埠已被佔用", "validatorImage": "由驗證者頁管理", "newVolume": "新建 named volume", "loopbackUrl": "本機測試網址", "nginxProxy": "建立 Nginx 反向代理", "intentPorts": "意圖（未發佈）", "customPort": "其他主機埠", "customPortHost": "主機埠", "customPortContainer": "容器埠", "pctUsed": "已用 {{n}}%", "customPortHint": "1–65535。例如 9090 → 80。", "pickBridge": "選擇 bridge 網絡" }, "deleteTitle": "刪除 {{id}}", "deleteDesc": "此動作無法復原。", "deleteC1": "會從這部主機移除該資源。", "deleteComposeVal": "這是驗證者堆疊 — 驗證者實例會一併刪除。", "pruneTitle": "清理 Docker 資源", "pruneDesc": "輸入 PRUNE 以確認。已刪除的資料無法復原。", "pruneC1": "會刪除所選範圍內未使用的資源。", "pruneC2": "Volume 與系統清理會永久刪除未使用的資料卷。", "pruneC3": "會移除呢個範圍內已停止的容器或未使用映像。" }, "email": { "title": "郵件", "subtitle": "域名、DNS、信箱與 Relay", "externalTodos": "Server 以外必須自行處理的事項", "ptr": "反向 DNS（PTR）需由 VPS/雲端供應商設定", "port25": "出站 Port 25 可能被雲端封鎖，需申請解除或使用 Relay", "create": "建立郵件域名", "createHint": "登記域名後可查看 DNS、信箱與健康檢查", "domains": "已登記域名", "empty": "尚未登記郵件域名", "emptyHint": "建立域名後可產生 DNS 清單與外部待辦", "searchPlaceholder": "搜尋域名…", "domain": "域名", "serverIp": "伺服器 IP", "notFound": "找不到此郵件域名", "backToList": "返回郵件域名", "softwareNeeded": "郵件所需軟件尚未安裝", "applyApplied": "已套用", "applyWritten": "已寫入", "applyFailed": "失敗", "applyDraft": "草稿", "queueMsgCount": "佇列 {{count}} 封", "queueLoadFailed": "讀取佇列失敗", "queueFlushRequested": "已請求清空佇列", "queueFlushFailed": "清空失敗", "queueDeleted": "已删 {{id}}", "queueDeleteFailed": "刪除失敗", "pillDomains": "{{count}} 域名", "pillNoDomain": "無域名", "statDomains": "域名", "statHealthy80": "健康≥80", "statApplied": "已套用", "statDraft": "草稿", "tabDomains": "域名", "tabWebmail": "網頁電郵", "tabQueue": "佇列", "tabStack": "軟件", "tabOps": "分工", "webmailGlobalDesc": "全面板共用一套網頁電郵；所有郵件域名的用戶都用同一個入口登入。", "webmailGlobalHint": "需要系統變更權限與外網以下載 Roundcube／SnappyMail。未開權限時不會建立半成品專案。", "webmailMovedHint": "網頁電郵已改為全站共用設定，不再按單一域名安裝。", "openGlobalWebmailSettings": "前往網頁電郵設定", "domainsTitle": "域名 ({{filtered}}/{{total}})", "domainsListDesc": "本機已登記的郵件域名", "emptyFilterHint": "沒有符合搜尋的域名", "emptyCreateHint": "用列表右上角「建立」登記域名；成功後进入詳情完成一鍵設定與 DNS。", "queueLocalTitle": "郵件佇列", "needExecute": "系統變更權限", "viewQueue": "查看佇列", "flushQueue": "清空佇列", "flushQueueEmpty": "佇列是空的", "flushQueueNeedExecute": "清空佇列需要系統變更權限", "queueHint": "本機 Postfix 佇列。查看屬讀取探測；清空需系統變更權限。", "deleteThisId": "刪除此 ID", "queueEmpty": "無待送郵件", "queueEmptyHint": "目前沒有待送郵件", "mtaTitle": "MTA 軟件", "mtaBody": "探測與一鍵安裝由上方横幅驱動。列表頁不假装已安裝。", "mtaSmtp": "SMTP 出站／入站", "mtaImap": "IMAP／POP3 信箱", "mtaDkim": "出站 DKIM 签署", "mtaMissingHint": "缺軟件時横幅會顯示「一鍵安裝／重新探測」。安裝成功 ≠ 域名已可收發。", "pathTitle": "域名設定路徑", "path1": "右上角登記域名", "path2": "进入域名詳情 → 一鍵設定郵件", "path3": "DNS 頁或外部 checklist 加 MX／SPF／DKIM／DMARC", "path4": "SSL 綁定 mail／webmail 主機名", "viewDomainList": "查看域名列表", "opsPanelTitle": "面板 vs 外部", "opsThisPage": "本頁：域名登記、佇列观測、軟件探測", "opsDetail": "域名詳情：一鍵 bootstrap、信箱、別名、relay、webmail", "opsHost": "主機商：PTR、Port 25 出站策略", "opsRegistrar": "域名商：MX／SPF／DKIM／DMARC 發佈", "statusTitle": "狀態", "statusDraft": "草稿（僅面板）", "statusWritten": "written：已寫管理檔，未必套到系統", "statusApplied": "applied：曾成功套用（仍视服務 is-active）", "statusReputation": "國際收件匣信譽無法 100% 自動化", "createModalDesc": "", "registerDomain": "建立", "domainApexHint": "不含 mail. 前綴", "serverIpv4Hint": "MX／A／SPF", "serverIpv4Ph": "公網 IPv4", "serverIpv6": "IPv6（可選）", "serverIpv6Hint": "AAAA／SPF ip6", "serverIpv6Ph": "可留空", "registerNote": "", "flushConfirmTitle": "清空全部郵件佇列？", "flushConfirmDesc": "佇列中的郵件會被刪除，不可復原。", "flushConfirm": "清空", "tabMailbox": "郵箱", "tabAliases": "別名／轉寄", "tabHealth": "健康", "tabRelay": "中繼", "tabSieve": "過濾／SSO", "tabAdvanced": "進階", "pillApplied": "已套用", "pillManaged": "管理檔", "pillDraft": "草稿", "statHealth": "健康", "statApply": "套用", "statDomain": "域名", "pausedFlag": "已暂停（旗標）", "normal": "正常", "statMailboxes": "郵箱", "statDnsRecords": "DNS 記錄", "dnsTodosTitle": "域名系統", "copyAllRecords": "複製全部記錄", "openDnsPage": "開啟 DNS 頁", "healthScore": "健康分", "deliverabilityChecks": "檢查項", "healthUnchecked": "尚未檢查", "healthUncheckedHint": "尚未實測 DNS／PTR／25 埠。", "healthPartialScore": "部分評分 {{n}}/100（僅 DNS）", "healthPartialHint": "只計了 DNS 清單 — 即時檢查與黑名單尚未測。", "deliverabilityScore": "送達能力檢查包", "opendkimNoReload": "OpenDKIM 不支援重載 — 更改金鑰或對照表後請用重啟。", "opendkimNoReloadTitle": "此堆疊不支援 systemctl reload opendkim", "healthChecklist": "檢查清單 {{score}}/100", "healthChecklistHint": "檢查清單分數 — 尚未做 DNS／PTR／25 埠實測", "healthLiveHint": "實測分數", "suggestedRecords": "建議記錄數", "externalTodosCount": "外部待辦", "colType": "類型", "colName": "名稱", "colValue": "值", "colNote": "說明", "copy": "複製", "noDnsRecords": "尚無 DNS 記錄", "externalTodosHeading": "外部待辦（面板無法代勞）", "externalTodosBody": "PTR、端口 25、登記商 DNS 須自行完成。", "copyExternalTodos": "複製外部待辦清單", "todoDone": "完成", "todoPending": "待辦", "refreshDnsHint": "按「重新整理」載入 DNS 建議", "mailboxListTitle": "郵箱列表（{{count}}）", "createMailbox": "+ 建立郵箱", "writeDovecot": "寫入 Dovecot 密碼庫", "noMailboxes": "尚未有郵箱 — 按「建立郵箱」開啟對話框", "mailboxOpsResult": "郵箱操作結果", "aliasesTitle": "別名／轉發／Catch-all", "aliasType": "類型", "aliasTypeAria": "別名類型", "typeForward": "轉寄", "typeAlias": "別名", "localPart": "本機部分", "localPartHint": "例如 sales", "targetMailbox": "目標信箱", "targetMailboxHint": "可用逗號分隔多個", "addAlias": "新增別名", "noAliases": "尚未有別名／轉發", "aliasResult": "別名結果", "autoreplyTitle": "自動回覆／暫停", "autoreplyDesc": "自動回覆", "autoreplyBodyHint": "可選「套用到系統」", "enableAutoreply": "啟用自動回覆", "enableAutoreplyDesc": "vacation.sieve；系統套用後才會掛上 .dovecot.sieve", "applyToSystem": "套用到系統", "applyToSystemDesc": "需系統變更權限與 root；失敗不會假成功", "subject": "主旨", "body": "內文", "saveApplyAutoreply": "儲存並套用自動回覆", "saveAutoreplyWritten": "儲存自動回覆", "suspendApply": "暫停並套用 REJECT", "suspendWritten": "暫停域名（written）", "resumeApply": "恢復並更新 map", "resumeWritten": "恢復域名（written）", "flagsResult": "旗標／系統套用結果", "defaultAutoreplySubject": "自動回覆", "defaultAutoreplyBody": "已收到您的郵件，稍後回覆。", "healthLiveTitle": "寄達健康（真實 DNS／埠探測）", "healthLiveDesc": "即時檢查", "serverIpLabel": "伺服器 IP", "liveCheck": "即時檢查", "liveOk": "正常", "liveBad": "異常", "notTested": "未測", "blacklist": "黑名單", "healthExternalNote": "PTR 與端口 25 須在主機商完成。", "runLiveCheck": "執行 Live 檢查", "dnsblThisIp": "DNSBL（本 IP）", "multiIpRbl": "多 IP RBL", "warmupAdvice": "暖身建議", "probeMatrix": "探測結果", "colItem": "項目", "colStatus": "狀態", "pass": "通過", "fail": "失敗", "unknown": "未知", "colDetail": "詳情", "outboundPort25": "出站 Port 25", "noProbeResults": "尚無探測結果", "noLiveYet": "尚未執行 Live 檢查", "noLiveYetHint": "先執行即時檢查", "mailSslTitle": "憑證與 TLS", "mailSslHint": "憑證在 SSL 頁簽發；此處跳到 mail／webmail／域名。", "openSslPage": "開啟 SSL 頁", "webmailSsoSkeleton": "Webmail SSO 骨架", "writeRoundcubeSso": "寫入 Roundcube SSO 骨架", "ssoSkeletonSymlink": "SSO 骨架 + 系統 symlink", "rateLimitTitle": "出站限速／反垃圾", "rateLimitDesc": "寫入 Postfix anvil 與 Rspamd（需系統變更權限）。", "hourlyMsgCap": "每小時訊息上限", "hourlyMsgCapHint": "全域取各域名最小值", "enableAntispam": "啟用反垃圾標記（Rspamd multimap）", "enableAntispamDesc": "關閉則此域名不列入 Rspamd 反垃圾對應表。寫入面板後須「套用到系統」才生效。", "writeControlOnly": "只寫入控制面", "applyToSystemBtn": "套用到系統", "dnsblResult": "黑名單（DNSBL）", "warmupResult": "暖身", "policyResult": "限速／反垃圾政策", "relayTitle": "SMTP 出站中繼", "relayHost": "中繼主機", "applyRelaySystem": "套用到系統 Postfix", "applyRelaySystemDesc": "寫入系統 Postfix 中繼", "saveApplyRelay": "儲存並套用到系統", "saveOnly": "只儲存設定", "relayResult": "中繼結果", "webmailSsoTitle": "Webmail 單點登入", "webmailSsoDesc": "Webmail 登入令牌", "mailboxPasswordOptional": "郵箱密碼（可選）", "mailboxPasswordHint": "可留空", "mailboxPasswordPh": "填寫後 token 可自動登入 Roundcube", "ssoTokenHint": "產生短期登入權杖", "issueSsoToken": "簽發 SSO token", "sieveTitle": "Sieve 過濾", "sieveDesc": "寫入 dataDir/email/sieve；寫入 ≠ Dovecot 已載入", "sieveTemplateHint": "預設過濾範本", "writeDefaultSieve": "寫入預設 Sieve", "listWrittenFiles": "列出已寫入檔案", "result": "結果", "domainSslTitle": "此域名 SSL", "domainSslDesc": "跳轉 SSL 頁並預填域名，申請 Let’s Encrypt", "requestCert": "申請 {{domain}} 凭證", "clientAutoTitle": "客戶端自動設定", "clientAutoDesc": "客戶端自動設定", "clientAutoHint": "產生 autodiscover／autoconfig", "generateCopyXml": "產生並複製設定 XML", "queueTitle": "郵件佇列", "queueDesc": "查詢或清空本機 MTA 佇列（亦可在郵件首頁操作；需系統變更權限）", "publicAutoconfig": "公開設定", "bootstrapTitle": "一鍵設定郵件", "bootstrapDesc": "安裝套件並套用郵件堆疊（需系統變更 + 管理員）。必須自訂管理員密碼。", "adminPassword": "管理員密碼", "adminPasswordHint": "管理員郵箱密碼", "adminPasswordPh": "至少 8 字元", "adminPasswordRequired": "請設定至少 8 字元的管理員密碼", "bootstrapBtn": "一鍵設定郵件", "webmailInstallDesc": "下載／套用 Roundcube", "webmailHostname": "Webmail 主機名", "webmailHostnameHint": "虛擬主機 server_name，例如 webmail.example.com", "installWebmail": "建立並上線網頁電郵", "bootstrapResult": "一鍵設定／Webmail 結果", "createMailboxTitle": "建立郵箱", "createMailboxDesc": "完整位址會是 {{local}}@{{domain}}", "createMailboxBtn": "建立郵箱", "localPartLabel": "本機部分", "localPartFullHint": "完整位址會是 {{local}}@{{domain}}", "passwordOptionalHint8": "可選；若填寫須至少 8 個字元，否則拒絕建立", "live": { "noMx": "無 MX", "mxLookupFailed": "MX 查詢失敗", "noSpf": "無 SPF TXT", "spfLookupFailed": "SPF 查詢失敗", "noDkim": "無 DKIM TXT", "dkimLookupFailed": "DKIM 查詢失敗", "noDmarc": "無 DMARC", "dmarcLookupFailed": "DMARC 查詢失敗", "noPtr": "無 PTR", "ptrLookupFailed": "PTR 查詢失敗", "port25Open": "外送 TCP 25 似乎暢通（探測 gmail-smtp-in.l.google.com）", "port25Blocked": "外送 TCP 25 探測失敗 — 可能被封鎖；請申請解封或改用中繼", "dnsblListed": "已列入：{{list}}", "dnsblClean": "以下清單乾淨：{{list}}" }, "deliv": { "mx": "MX 記錄", "mxFix": "在 DNS 供應商新增 MX 指向郵件主機", "spf": "SPF 文字", "spfFix": "發布 v=spf1 並包含本機 IP", "dkim": "DKIM TXT", "dkimFix": "發布面板提供的 selector._domainkey TXT", "dmarc": "DMARC 文字", "dmarcFix": "發布 _dmarc 政策（可先 p=none）", "ptr": "反向 DNS（PTR）", "ptrFix": "在 VPS／雲端主控台設定 PTR 對齊郵件主機名 — 面板無法代設", "port25": "外送 埠 25", "port25Fix": "向主機商申請解封 埠 25，或設定 SMTP 中繼（submission 587）", "dnsbl": "DNSBL 聲譽", "dnsblFix": "於列出之服務除名；乾淨前勿大量寄信", "relay": "SMTP 中繼（埠 25 被封鎖時）", "relayOptional": "埠 25 探測暢通 — 中繼可選", "relayPresent": "dataDir 已有中繼設定（套用仍可能需 執行）", "relayMissing": "未設定中繼 — 埠 25 持續封鎖時必須設定", "relayFix": "面板郵件 → 中繼，或 ysk-server hosting 電郵-初始化 加 relay", "warmup": "暖機計劃", "warmupDetail": "{{phases}} 階段 · 第 1 日最多 {{day1}} 封", "warmupFix": "跟從階段限額；勿用新 IP 對冷名單大量發送", "honesty1": "面板從不保證全球 inbox 送達（Gmail／Outlook 過濾屬外部）。", "honesty2": "PTR 與 埠 25 屬 VPS／網絡供應商 — 非 YSK 控制平面可改。", "honesty3": "MX／SPF／DKIM／DMARC 必須在權威 DNS 供應商發布。", "honestyPortBlocked": "埠 25 似乎被封鎖 — 大量發送前請用中繼或申請解封。", "honestyPortOk": "埠 25 探測成功 — 仍請監察退信與 DNSBL。" }, "catchall": "Catch-all（全收）", "webmailRoundcube": "網頁電郵", "warmup": { "p1g1": "只寄交易類／已知可靠收件人", "p1g2": "監察退信；投訴率保持接近零", "p1g3": "放量前確保 SPF／DKIM／DMARC／PTR 已生效", "p2g1": "只向有互動的聯絡人緩慢擴張", "p2g2": "每日查 DNSBL；被列入即暫停", "p2g3": "若 埠 25 受限，優先用 587 submission 而非 bulk", "p3g1": "指標保持乾淨先加倍量", "p3g2": "名單分段；硬退信即移除", "p4g1": "無封鎖先接近正常量", "p4g2": "持續監察 DMARC rua", "c1": "PTR 對齊 HELO／EHLO（郵件主機名）", "c2": "SPF + DKIM + DMARC 已發布並對齊", "c3": "DNSBL 乾淨（Spamhaus／SpamCop／Barracuda）", "c4": "外送 埠 25 暢通或已設中繼", "c5": "切勿使用購入的「bulk 電郵」IP 段", "c6": "考慮域名年齡／歷史（新域名要更慢爬升）", "noteNewIp": "視此 IP 為新 IP — 由第 1–3 日限額開始", "noteOldIp": "既有 IP 在改設定後仍宜逐步爬升", "noteProcess": "暖機是操作員流程；YSK 提供提示與 DNSBL，不假裝行銷 ESP 量" }, "health": { "dnsUnconfirmed": "DNS 記錄（MX／SPF／DKIM）尚未確認", "dmarcMissing": "缺少 DMARC — 強烈建議設定", "dmarcUnpublished": "DMARC 記錄已在面板產生，但公網尚未解析到", "ptrBad": "PTR 反向 DNS 缺失或不正確 — 請向 VPS 供應商申請", "port25Blocked": "外送 埠 25 似乎被封鎖 — 請申請解封或改用 SMTP 中繼", "port25Unknown": "埠 25 狀態未知 — 請執行連通性檢查" }, "stack": { "tlsNote": "SMTP／IMAP 用 Let’s Encrypt TLS 憑證", "externalNote": "送達率仍需外部 DNS／PTR／Port25" }, "test": { "defaultSubject": "YSK 伺服器 郵件測試", "needMta": "需要本機 MTA（Postfix）已安裝，且 埠 25／中繼已設定", "checkSpam": "寄出後請查收件人垃圾箱與伺服器郵件日誌", "hintDeferred": "若 deferred：查 埠 25 封鎖或中繼憑證", "hintSpam": "若已接受但仍入垃圾：改善 SPF／DKIM／DMARC／PTR 並暖機", "hintLogs": "檢查 /var/log/mail.log 或 journalctl -u postfix" }, "leMailHost": "申請憑證 · {{host}}", "leWebmailHost": "申請憑證 · {{host}}（網頁郵件）", "leApexHost": "申請憑證 · {{host}}（主域名）", "applyMailTls": "套用郵件 TLS 路徑", "applyMailTlsHint": "須已有 Let’s Encrypt 憑證；只寫入郵件服務路徑並重新載入。", "probeMx": "MX 記錄", "probeSpf": "SPF", "probeDkim": "DKIM", "probeDmarc": "DMARC", "probePtr": "PTR", "probeDnsbl": "DNSBL", "dnsAuthRepairTitle": "DNS 驗證待修", "dnsAuthRepairHint": "請在 DNS 分頁複製建議記錄，發佈後再按即時檢查。", "fixHintSpf": "SPF 未通過：請發佈 v=spf1 的 TXT（@）。", "fixHintDkim": "DKIM 未通過：請發佈選擇器._domainkey 的 TXT。", "fixHintDmarc": "DMARC 未通過：請發佈 _dmarc 的 TXT。", "fixHintMx": "MX 未通過：請将郵件主機 MX 指到 mail.域名。", "mailTls": { "needRootExecute": "套用郵件 TLS 需要管理員權限與系統變更權限。", "certMissing": "未找到 {{host}} 憑證檔（{{path}}）。", "getCertFirst": "請先在 SSL 頁為 {{host}} 申請 Let’s Encrypt 憑證。", "certFound": "已找到 {{host}} 憑證。", "postconfFailed": "postconf 失敗：{{detail}}", "postfixPathsSet": "已設定 Postfix TLS 憑證路徑。", "postfixReloaded": "已重新載入 Postfix。", "postfixReloadFailed": "Postfix 重新載入失敗：{{detail}}", "dovecotApplied": "已寫入 Dovecot TLS 片段並嘗試重新載入。", "dovecotSkipped": "已略過 Dovecot（未安裝或 doveconf 不可用）。", "dovecotSslOmitted": "郵件憑證不存在，已改寫 Dovecot 為 ssl=no，避免單元因缺少憑證而無法啟動。" }, "policyApplySystemHint": "勾選「套用到系統」先會寫入 Postfix／Rspamd 對應並重新載入；否則只寫控制面草稿。", "rateLimitAppliedNote": "已套用每小時外發限额與反垃圾標記（若啟用系統套用）。", "bootstrapHonesty": "一鍵設定寫入管理檔案；應用到系統需權限。DNS／PTR／端口 25 須自行完成。", "bootstrapAfterSteps": "完成後建議：① 發佈 DNS（MX/SPF/DKIM/DMARC）② 申請 mail.域名 SSL ③ 按「套用郵件 TLS 路徑」。", "bootstrapThenSsl": "下一步：申請 mail SSL", "bootstrap": { "mtaOk": "已寫入 MTA 設定（{{count}} 個檔）", "mtaIncomplete": "MTA 設定未完成：{{detail}}", "seeNotes": "見 notes", "mailboxOk": "信箱 {{address}}（狀態 {{status}}）", "mailboxExists": "信箱已存在（略過）：{{detail}}", "passdbOk": "Dovecot passdb 已寫入（{{count}} 個信箱）", "webmailOk": "網頁郵件方案 {{mode}}（{{host}}）", "mailTlsTodo": "郵件 TLS：請為 {{mailHost}} 申請憑證後，於健康分頁按「套用郵件 TLS 路徑」。", "externalDns": "外部待辦（你負責）：於 DNS 商設定 MX/SPF/DKIM/DMARC；VPS 設 PTR；開放埠 25 或改用 SMTP 中繼。", "healthScore": "健康分數 {{score}}/{{max}}（DNS/PTR/埠 25 不會自動完成）", "webmailProjectOk": "網頁電郵專案 {{tool}} @ {{host}}（{{status}}）", "dovecotApplyOk": "已套用 Dovecot 虛擬認證" }, "tabDeliverability": "送達", "pendingCount": "待處理", "externalTodosOneLiner": "PTR、端口 25、登記商 DNS 須自行完成。", "runDeliverabilityPack": "執行送達檢查", "deliverabilityTitle": "送達檢查", "deliverabilityEmpty": "尚未檢查", "deliverabilityEmptyDesc": "按「執行送達檢查」探測 DNS、PTR、端口 25。", "panelReady": "面板可驗", "gaps": "有缺口", "checkOk": "通過", "checkExternal": "外部", "checkFail": "失敗", "mailboxListDesc": "建立後可寫入 Dovecot 密碼庫（需系統變更權限）", "aliasesDesc": "把地址轉到其他信箱", "relayDesc": "經外部 SMTP 寄信；套用到系統先會寫 Postfix（需系統變更權限）", "deliverabilityDesc": "PTR／DNS／端口 25 檢查", "dnsTodosDesc": "建議記錄可複製到外部 DNS 或到 DNS 頁建 zone（寫入 ≠ 權威上線）", "deliverabilityHonesty": "無法代設 PTR 或解除埠 25 封鎖", "warmupSuggest": "暖身建議", "writeSsoSkeleton": "寫入 Roundcube SSO 骨架", "rateLimitPerHour": "每小時訊息上限", "rateLimitGlobalHint": "全域取各域名最小值", "savePolicyWritten": "只寫入控制面", "dnsblMultiIp": "多 IP RBL", "webmailTool": "網頁電郵軟件", "webmailToolRoundcube": "Roundcube（預設）", "webmailToolSnappy": "SnappyMail（輕量）", "webmailProjectName": "專案名稱", "installWebmailProject": "建立並上線網頁電郵", "openWebmail": "開啟網頁電郵", "webmailRisk": "公開網頁電郵有風險 — 請盡快上 HTTPS。", "webmailForceHttps": "強制 HTTPS（Roundcube；需已綁 SSL）", "reinstallWebmail": "重新安裝／升級", "installWebmailTitle": "建立共用網頁電郵專案（首次安裝）", "reinstallWebmailTitle": "重建／升級現有網頁電郵專案", "reinstallNeedInstall": "請先安裝網頁電郵", "webmailSsoAdvanced": "進階 · SSO 插件", "tlsRoleMail": "mail（IMAP／SMTP）", "tlsRoleMailHint": "郵件伺服器主機名", "tlsRoleWebmail": "webmail（網頁電郵）", "tlsRoleWebmailHint": "網頁電郵虛擬主機", "tlsRoleApex": "主域名", "tlsRoleApexHint": "網頁／apex 憑證", "tlsRequestLe": "申請 LE", "tlsRequestLeFor": "為 {{host}} 申請 LE", "advancedToolsTitle": "佇列與客戶端", "flushQueueConfirm": "確定清空本機 MTA 佇列？此操作不可復原。", "mailSslTitleShort": "憑證與 TLS", "deleteDomain": "刪除域名", "deleteDomainConfirmTitle": "刪除郵件域名？", "deleteDomainConfirm": "將刪除 {{domain}} 及其信箱、別名與控制面資料。系統 Postfix／Dovecot 設定可能需另行清理。", "deleteDomainBtn": "刪除", "deleteMailbox": "刪除信箱", "deleteMailboxTitle": "刪除信箱？", "deleteMailboxDesc": "將刪除 {{address}} 及其控制面資料與本機 Maildir（若存在）。", "deleteMailboxC1": "信箱登入與郵件檔", "deleteMailboxC2": "重寫該域 virtual map（控制面）", "deleteMailboxC3": "系統 Dovecot／Postfix 可能仍需另行清理", "deleteAliasTitle": "刪除別名／轉寄？", "deleteAliasDesc": "將刪除 {{source}}。", "deleteImpact": "{{mailboxes}} 個信箱 · {{records}} 筆 DNS 紀錄 · {{aliases}} 個別名", "deleteDomainC1": "所有信箱與別名", "deleteDomainC2": "控制面 DKIM、DNS 建議與旗標", "deleteDomainC3": "本機 dataDir/email 目錄（若存在）", "deleteDomainC4": "系統 MTA 映射可能仍在，需另行清理", "deleteDialogTitle": "永久刪除郵件域名", "deleteDialogDesc": "即將刪除 {{domain}}，無法還原。", "deletePermanent": "永久刪除", "deleteRemoveData": "一併刪除本機郵件資料", "deleteRemoveDataDesc": "取消則只移出面板，磁碟上的 Maildir 會保留", "deleteTypeName": "輸入域名以確認", "deleteTypeNameHint": "必須完全一致：{{name}}", "deleteWillData": "本機 dataDir/email 目錄（若存在）", "deleteKeepData": "保留本機 dataDir 郵件資料", "deleteSystemWarn": "系統 Postfix／Dovecot 映射不會自動清乾淨；必要時請另行處理。", "hostIpPick": "本機 IPv4", "hostIpPickV6": "本機 IPv6", "editMailboxTitle": "修改信箱", "editMailboxDesc": "更改 {{address}} 的密碼或其他登入設定", "editMailboxSave": "儲存變更", "newPassword": "新密碼", "newPasswordHint": "留空則保持現有密碼；若填寫至少 8 個字元", "confirmPassword": "確認密碼", "mailboxStatus": "狀態", "mailboxStatusActive": "啟用（允許登入）", "mailboxStatusDisabled": "停用（禁止登入）", "mailboxStatusHint": "停用時會寫入 Dovecot 密碼庫 *，拒絕登入", "colAddress": "地址", "colLocalPart": "本機部分", "colPassword": "密碼", "colCreated": "建立時間", "hasPassword": "已設定", "noPassword": "未設定", "mailboxPager": "信箱分頁", "prevPage": "上一頁", "nextPage": "下一頁", "pageOf": "第 {{page}} / {{total}} 頁 · {{count}}", "mailboxEmptyTitle": "尚未有信箱", "passwordMismatch": "兩次密碼不一致", "passwordTooShort": "密碼至少 8 個字元", "mailboxUpdateNeedField": "請設定新密碼或更改狀態", "catchallHint": "未對應的本地部分會送到目標信箱。只寫草稿，須套用郵件才生效。", "queueSearchPh": "搜尋 ID、寄件人或收件人…", "queueId": "佇列 ID", "queueSender": "寄件人", "queueRecipients": "收件人", "queueSize": "大小", "queueReason": "原因", "queueActive": "傳送中", "queueHeld": "已暫停", "queueDeferred": "延遲", "deleteQueueTitle": "刪除此佇列郵件？", "deleteQueueDesc": "從本機 MTA 佇列移除 {{id}}。需系統變更權限。", "openQueuePage": "開啟郵件佇列", "dovecotFailedHint": "Dovecot 服務失敗。請到軟件分頁查看單元狀態。", "dovecotFailedStatus": "Dovecot 狀態為 {{status}}。請到軟件分頁查看單元摘要。", "mailCertMissing": "尚未有 {{hosts}} 的憑證。請到 SSL 頁簽發。", "mailCertPresent": "郵件憑證已簽發 — 不是缺證問題。", "webmailNeedCert": "{{host}} 尚未有憑證 — 請先到 SSL 簽發，才可強制 HTTPS。", "domainRequired": "請填寫域名", "domainInvalid": "請輸入有效域名", "serverIpRequired": "請填寫伺服器 IP", "serverIpInvalid": "請輸入有效 IP 位址", "serverIpv6Invalid": "請輸入有效 IPv6 位址", "localPartRequired": "請填寫本機部分", "localPartInvalid": "本機部分只可用英文字母、數字與 . _ + -", "aliasDestRequired": "請填寫至少一個目標信箱", "mailboxStatusManaged": "受管", "mailboxStatusActiveShort": "啟用", "mailboxStatusDisabledShort": "停用", "mailboxStatusSystem": "系統已佈建", "mailboxStatusPending": "待系統佈建", "mailboxStatusFailed": "系統佈建失敗", "dnsblCleanStatus": "未列入", "dnsblListedStatus": "已列入", "deliverabilityDone": "送達檢查完成（{{score}}/100）", "sieveEmpty": "尚未寫入 Sieve 檔案", "sieveListed": "已列出 {{count}} 個檔案", "webmailHostnameRequired": "請填寫網頁電郵主機名", "sieveFilesTitle": "已寫入檔案" }, "errors": { "YSK_UNAUTHORIZED": "未授權", "YSK_FORBIDDEN": "禁止存取", "YSK_NOT_FOUND": "找不到資源", "YSK_VALIDATION": "輸入無效", "YSK_ALLOWLIST_DENIED": "不在允許清單", "YSK_APPROVAL_REQUIRED": "需要審批", "YSK_APPROVAL_PENDING": "審批處理中", "YSK_APPROVAL_REJECTED": "審批已拒絕", "YSK_SANDBOX_VIOLATION": "沙箱限制", "YSK_LLM_UNTRUSTED": "不可信 LLM 輸出", "YSK_CONFIG_INVALID": "設定無效", "YSK_SETUP_INCOMPLETE": "安裝未完成", "YSK_UPDATE_FAILED": "更新失敗", "YSK_INTERNAL": "內部錯誤", "YSK_NEED_EXECUTE": "需要系統變更權限", "YSK_NEED_ROOT": "需要系統管理員權限", "YSK_RATE_LIMITED": "嘗試過多，請稍後再試", "YSK_TOTP_REQUIRED": "需要雙重驗證碼", "auth": { "needCredentials": "請輸入用戶名與密碼", "rateLimited": "登入嘗試過多，請稍後再試", "badCredentials": "帳號或密碼不正確", "accountSuspended": "帳戶已暫停", "adminTotpStrict": "管理員必須先啟用 雙重驗證（strict）。請用已啟用 雙重驗證 的帳號，或關閉 strict 設定。", "totpReplay": "驗證碼已使用，請等下一個週期", "totpRequired": "需要有效的雙重驗證碼", "mustEnrollTotp": "政策：請立即啟用雙重驗證", "userNotFound": "找不到用戶", "totpSetupNeedReauth": "設定 雙重驗證 需要重新輸入密碼（或近期 step-up 驗證碼）", "totpBeginFirst": "請先開始設定 雙重驗證", "totpInvalid": "驗證碼無效", "stepUpRequired": "此操作需要重新輸入雙重驗證碼", "missingCredential": "缺少登入憑證", "apiKeyUserMissing": "介面 金鑰對應用戶不存在", "apiKeyInvalid": "介面 金鑰無效", "sessionExpired": "登入已失效，請重新登入", "sessionIdle": "閒置逾時，請重新登入", "totpNotEnabled": "未啟用 雙重驗證", "totpSecretNoDataDir": "TOTP secret 已加密但未設定 dataDir", "mustChangePassword": "請先設定新密碼才可繼續", "policyNeedsOwn2fa": "請先為本帳號啟用 2FA，並以驗證碼確認，才可要求其他人啟用 2FA" }, "http": { "notFoundRoute": "找不到：{{method}} {{path}}", "unauthorized": "未登入或工作階段已過期", "forbidden": "沒有權限執行此操作", "notFound": "找不到資源", "unprocessable": "操作無法完成（伺服器拒絕）", "requestFailed": "請求失敗（{{status}}）", "jsonInvalid": "JSON 無效", "internal": "內部錯誤", "payloadTooLarge": "請求內容過大" }, "YSK_HOST_BROWSE_SSRF": "主機瀏覽已被安全政策攔截", "YSK_HOST_BROWSE_SESSION": "主機瀏覽工作階段不存在或已過期", "YSK_HOST_BROWSE_UPSTREAM": "主機瀏覽上游擷取失敗", "YSK_HOST_BROWSE_NEED_CHROME": "真實瀏覽器引擎需要主機上的 Chrome／Chromium" }, "fail2ban": { "backToProtection": "防護中心", "statCurrentBan": "目前 封鎖", "statTotal": "累計", "statBanList": "封鎖列表", "statBoot": "開機", "startedOk": "已啟動 fail2ban", "startService": "啟動服務", "notInstalled": "fail2ban 尚未安裝", "toolHintPrefix": "底層工具：", "toolHintBody": "fail2ban 會掃日誌後臨時封鎖。攻擊應變請用", "toolHintTemp": "", "toolHintBody2": "", "toolHintUfw": "負責埠與永久規則。", "tabs": { "bans": "封鎖列表", "whitelist": "白名單", "jails": "Jail", "policy": "策略", "service": "服務", "about": "說明" }, "manualBanTitle": "手動 封鎖（臨時）", "ipPlaceholder": "IPv4 或 IPv6", "banipOk": "已 banip", "manualBanHint": "臨時封鎖，過 bantime 會自動解；永久拒請用 UFW。白名單見「白名單」分頁。", "currentBans": "目前封鎖", "bannedTableTitle": "封鎖中的 IP（即時 fail2ban-client）", "bannedTableDesc": "需能讀取 客戶端；unban 需 系統變更權限", "unbanOk": "已 unban", "unban": "解封", "addWhitelistTitle": "加入 ignoreip 白名單", "whitelistAdded": "已加入白名單", "addWhitelistShort": "+白名單", "emptyBansTitle": "無封鎖中 IP", "emptyBansDesc": "或無權讀取 fail2ban-客戶端", "ignoreipTitle": "ignoreip 白名單", "ignoreipDesc": "永不被封鎖的 IP（管理檔 + 可選 live fail2ban-client）。建議加入你的辦公／家居 IP。", "whitelistEmptyWarn": "白名單為空，jail 可能把你自己封鎖。套用 ignoreip 前請先加入登入 IP。", "suggestIgnoreLogin": "你目前的登入 IP {{ip}}", "applyIgnoreEmptyWarn": "白名單為空時套用會清空 ignoreip", "applyIgnoreNeedConfirm": "會重寫 jail ignoreip 並重新載入 fail2ban", "addIp": "新增 IP", "addWhitelist": "加入白名單", "applyPolicyIgnoreip": "套用策略（含 ignoreip）", "applyIgnoreipOk": "已把 ignoreip 寫入 jail.local 並套用", "ignoreipHint": "沒有系統變更權限時只寫面板檔。套用策略會重建 jail.local 的 ignoreip 並重新載入。", "whitelistTitle": "白名單 ({{count}})", "whitelistRemoved": "已移除白名單", "remove": "移除", "emptyWhitelistTitle": "尚未有白名單 IP", "emptyWhitelistDesc": "加入管理 IP，避免自己被 封鎖", "activeJails": "作用中 Jail", "colCurrent": "目前", "colTotal": "累計", "colDesc": "說明", "emptyJailsTitle": "無 jail", "emptyJailsDesc": "服務未啟動或尚未套用 jail.local", "policyTitle": "Jail 策略", "policyDesc": "寫入管理 jail.local；套用時 copy + 重新載入（不經 UFW）", "bantimeHint": "封鎖時長", "findtimeHint": "統計窗口", "maxretryHint": "窗口內最多失敗次數", "customExample2h": "自訂，例 2h", "customExample15m": "自訂，例 15m", "customMaxretry": "自訂 1–50", "min": "{{n}} 分", "hour": "{{n}} 時", "week": "{{n}} 週", "enableJailsHint": "啟用 jail（勾選後套用）：", "writtenOnlyMsg": "已寫管理檔（未套用系統）", "writeOnly": "只寫管理檔", "appliedOk": "已套用 fail2ban", "applyToSystem": "套用到系統", "systemdTitle": "系統服務 控制", "enableAndStart": "啟用並啟動", "serviceHint": "攻擊應變請用", "serviceHintSuffix": "（會呼叫本頁 jail + Nginx 限速，不重複建第二套 UFW）。", "actionOk": { "enable": "已啟用並啟動 fail2ban", "start": "已啟動 fail2ban", "reload": "已重新載入 fail2ban", "restart": "已重啟 fail2ban", "stop": "已停止 fail2ban" }, "statWhitelist": "白名單", "invalidIp": "請輸入有效的 IPv4、IPv6 或 CIDR。", "whitelistPendingApply": "已寫入面板名單。請按「套用策略」才會寫入 jail.local。", "ignoreipFile": "dataDir/fail2ban/ignoreip.txt", "jailsTabHint": "顯示作用中 Jail 狀態。要開關 Jail 請到「策略」分頁。", "colJail": "監獄", "colEnabled": "開啟", "serviceStateLine": "單元 {{unit}} · {{state}} · 開機 {{boot}}", "jail": { "sshd": "遠端登入暴力破解", "nginxHttpAuth": "Nginx HTTP 驗證", "nginxBotsearch": "Nginx 掃描／機械人探測", "nginxBadbots": "Nginx 已知惡意機械人", "nginxLimitReq": "Nginx 限速 Jail", "postfix": "Postfix 郵件暴力破解", "dovecot": "Dovecot 郵件登入", "recidive": "累犯" }, "cannotBanSelf": "這是本機或你的登入 IP — 應加入 ignoreip，不要封鎖", "suggestIgnoreHint": "建議的管理 IP（先寫入面板檔，套用政策後才生效）：", "suggestIgnoreAdd": "加入 {{ip}}" }, "featurePage": { "back": "返回" }, "files": { "pillFiles": "{{count}} 檔", "pillTrash": "回收桶 {{count}} 項", "pillSpace": "已用 {{used}}", "statFiles": "檔案", "statFolders": "資料夾", "statUsage": "用量", "statSelected": "已選", "statTrash": "回收桶", "statShares": "分享", "publicSiteSettings": "公用站設定", "opsResultTitle": "檔案操作結果", "closeResult": "關閉結果", "tabBrowse": "瀏覽", "tabTrash": "回收桶", "tabShares": "分享", "spaceLabel": "空間", "publicFiles": "公用檔案", "viewLabel": "視圖", "allFiles": "全部檔案", "favorites": "收藏", "upload": "上傳", "newFolder": "新建資料夾", "newTextFile": "新建文字檔", "download": "下載", "copy": "複製", "move": "移動", "zip": "壓縮 zip", "unzip": "解壓", "unzipDone": "已解壓 {{path}}", "unzipFailed": "unzip 失敗", "delete": "刪除", "searchName": "搜尋…", "sortAria": "排序", "sortNameAsc": "名↑", "sortNameDesc": "名↓", "sortSizeAsc": "小↑", "sortSizeDesc": "大↓", "sortMtimeDesc": "最新", "sortMtimeAsc": "最舊", "viewList": "列表", "viewIcons": "圖示", "viewAria": "檢視模式", "toolbarAria": "檔案操作", "pathAria": "路徑", "rootPublic": "公用", "rootProject": "專案", "emptyFavorites": "尚未有收藏", "emptyFolder": "此資料夾是空的", "emptyFolderHint": "拖放檔案或整個資料夾到此處上傳，或按「上傳」", "selectItem": "選擇 {{name}}", "colName": "名稱", "colSize": "大小", "colMtime": "修改", "rename": "重新命名", "unfavorite": "取消收藏", "favorite": "收藏", "share": "分享", "versions": "版本", "selectAllAria": "全選", "selectAll": "全選", "folder": "資料夾", "dirNamedLikeFile": "（資料夾殘留；名稱像檔案）", "dropToUpload": "放開以上傳", "trashTitle": "回收桶 ({{count}})", "trashDesc": "刪除的檔案可還原或永久清除", "emptyTrash": "清空回收桶", "emptyTrashTitle": "清空回收桶？", "emptyTrashDesc": "回收桶內所有檔案會永久刪除，無法還原。", "emptyTrashDone": "已清空回收桶", "purgeForeverDesc": "此檔案會永久刪除，無法還原。", "colOrigPath": "原路徑", "colDeletedAt": "刪除時間", "restore": "還原", "restored": "已還原", "purgeForever": "永久刪除", "purged": "已永久刪除", "trashEmpty": "回收桶是空的", "sharesTitle": "公開分享連結 ({{count}})", "colPath": "路徑", "colLink": "連結", "colDownloads": "下載次數", "unshare": "取消", "unshareDone": "已取消分享", "sharesEmpty": "尚未建立分享", "sharesEmptyHint": "在檔案列按「分享」", "webdavTitle": "WebDAV 設定", "webdavDesc": "用 Basic 認證把公用檔案根掛到 Finder／Windows／rclone；權杖只顯示一次。", "enableIssueToken": "啟用並簽發權杖", "webdavReissueToken": "重新簽發權杖", "webdavReissueConfirm": "重新簽發會立即作廢舊密碼，已掛載的客戶端會斷線。確定？", "webdavDisableConfirm": "停用後 /webdav 將拒絕所有連線。確定？", "tokenIssued": "已簽發權杖", "status": "狀態", "enabledMount": "已啟用 · {{path}}", "notEnabled": "未啟用", "disable": "停用", "webdavAlreadyOff": "WebDAV 已關閉", "webdavDisabled": "已停用 WebDAV", "webdavEnabledNoEcho": "已啟用（密碼不會再次顯示；需要時請重新簽發）", "webdavDefaultOff": "預設關閉 — 按「啟用並簽發權杖」開始", "webdavAfterEnable": "啟用 WebDAV 並簽發權杖後才可用。", "webdavOn": "已啟用", "webdavOff": "已關閉", "webdavOffNoToken": "已停用（無有效權杖）", "webdavTokenId": "權杖 #{{id}}", "webdavTokenInactive": "已停用，權杖 #{{id}} 不生效", "webdavUpdated": "更新於 {{at}}", "webdavTokenOnceTitle": "請立即複製密碼", "webdavTokenOnceHint": "此密碼只顯示一次；關掉此頁後無法再查看。", "webdavConnTitle": "連線資訊", "webdavConnDesc": "客戶端用以下 URL 與 Basic 帳密連入", "webdavUrl": "伺服器 URL", "webdavUsername": "用戶名", "webdavPassword": "密碼（權杖）", "webdavPasswordHidden": "已簽發但不再顯示 — 請重新簽發或用已儲存的密碼", "webdavPasswordNone": "尚未簽發", "webdavRoot": "掛載根目錄", "webdavRootValue": "面板公用檔案根（public files）", "webdavAuth": "認證方式", "webdavAuthValue": "HTTP Basic · 用戶 ysk · 密碼 = 面板簽發的權杖", "webdavConnBundle": "連線資料", "webdavCopyAll": "複製全部連線資料", "webdavClientsTitle": "客戶端設定", "webdavClientsDesc": "常見掛載方式（HTTPS 建議；自簽憑證需在客戶端信任）", "webdavClientFinder": "macOS 查找器", "webdavClientFinderHint": "前往 → 連接伺服器…（⌘K），貼上 URL，用戶 ysk，密碼為權杖。", "webdavClientWin": "Windows", "webdavClientWinHint": "此電腦 → 對應網絡磁碟機 → 選擇「使用其他認證」；或用 Cyberduck / WinSCP（WebDAV）。", "webdavNotesTitle": "注意事項", "webdavNote1": "WebDAV 對應公用檔案根，不是整個主機檔案系統。", "webdavNote2": "需要由 reverse proxy／防火牆放行面板埠，並建議只用 HTTPS。", "webdavNote3": "重新簽發權杖會即時作廢舊密碼；停用會拒絕所有 /webdav 請求。", "webdavNote4": "支援 OPTIONS／PROPFIND／GET／PUT；進階 LOCK 等未必齊全。", "copiedLabel": "已複製「{{label}}」", "newFolderTitle": "新建資料夾", "willCreateAt": "將建立於「{{path}}」", "nameRequired": "請輸入名稱", "folderCreated": "已建立資料夾", "create": "建立", "folderName": "資料夾名稱", "noPathSepHint": "不可含路徑分隔符", "newTextTitle": "新建文字檔", "fileNameRequired": "請輸入檔名", "textFileCreated": "已建立文字檔", "fileName": "檔名", "fileNameHint": "例如 readme.md 或 notes.txt", "versionsTitle": "版本歷程", "versionsDesc": "", "noVersions": "尚無歷史版本", "noVersionsHint": "", "versionRestored": "已還原", "restoreVersionConfirm": "用 {{version}} 覆寫現檔 {{file}}？磁碟上的現檔會被蓋掉。", "renameTitle": "重新命名", "renameCurrent": "目前：{{name}}", "renamed": "已重新命名", "newName": "新名稱", "newNameHint": "僅改檔名，不變更所在目錄", "copyTo": "複製到…", "moveTo": "移動到…", "copyMoveDesc": "{{action}} {{count}} 個項目", "actionCopy": "複製", "actionMove": "移動", "copied": "已複製", "moved": "已移動", "targetFolderPath": "目標資料夾路徑", "targetFolderHint": "相對 管理員，例如 docs 或 docs/a；留空 = 根目錄", "shareCreateTitle": "分享檔案", "shareCreateDesc": "建立公開下載連結；密碼可選。", "createLink": "建立連結", "sharePath": "路徑：", "passwordOptional": "密碼（可選）", "passwordOptionalHint": "留空則任何人持有連結即可下載", "passwordPlaceholder": "可選", "linkCreated": "連結已建立：", "chmodTitle": "修改權限（chmod）", "chmodDone": "已 chmod {{mode}} → {{count}} 個項目", "chmodDoneShort": "已 chmod {{mode}}", "chmodFailed": "chmod 失敗", "apply": "套用", "chmodApplyHint": "將套用到已選 {{count}} 個項目（八進位，如 644 / 755）", "chmod644": "644 檔", "chmod755": "755 可執行", "chmod600": "600 私密", "chmod700": "700 目錄私密", "chmod775": "775 群組寫", "chmodCustomPh": "自訂 0644…", "mode": "模式", "zipTitle": "壓縮為 zip", "zipCreated": "已建立 {{path}}", "zipDone": "已壓縮 → {{path}}", "zipFailed": "zip 失敗", "compress": "壓縮", "zipHint": "將壓縮已選 {{count}} 個項目到目前資料夾（需系統有 zip 指令）", "destFileName": "目標檔名", "destPathHint": "路徑：{{path}}", "movedToTrash": "已移至回收桶", "moveToTrashTitle": "移至回收桶？", "moveToTrashDesc": "將刪除 {{count}} 個項目（可於回收桶還原）", "deleteMore": "，以及另外 {{n}} 項", "unshareTitle": "撤銷此分享？", "unshareDesc": "撤銷 {{name}} 的連結（{{url}}）。連結會立即失效。", "preview": "預覽", "imagePreviewNeedLogin": "圖片預覽需要已登入；請改用下載", "pdfDownloadHint": "PDF 請按下載開啟（需授權標頭）", "noEmbedPreview": "此類型無法內嵌預覽，請下載。", "uploadDone": "已上傳 {{count}} 個檔案", "downloadFailedStatus": "下載失敗 ({{status}})", "downloadFailed": "下載失敗", "uploadFolder": "上傳資料夾", "dropFolderOrFile": "放開以上傳檔案或整個資料夾", "uploadPanelTitle": "上傳進度", "uploadPanelStats": "{{done}}／{{total}} 完成 · 失敗 {{err}}", "uploadClearDone": "清除已完成", "uploadInFolder": "資料夾 {{folder}}", "uploadStatusDone": "完成", "uploadStatusError": "失敗", "uploadStatusQueued": "排隊", "uploadNoFile": "無檔案內容", "uploadSomeFailed": "{{count}} 個項目上傳失敗", "uploadTruncated": "一次最多上傳 {{max}} 項（共選了 {{total}} 項，其餘已略過）", "previewFailed": "預覽失敗", "videoNotSupported": "瀏覽器無法播放此影片。", "audioNotSupported": "瀏覽器無法播放此音訊。", "edit": "編輯", "editorTitle": "編輯 · {{name}}", "editorSave": "儲存", "editorSavedIdle": "已儲存", "editorSaved": "已儲存 {{name}}", "editorSaveFailed": "儲存失敗", "editorDirty": "未儲存", "editorClean": "已儲存", "editorChars": "{{count}} 字元", "editorAria": "編輯 {{name}}", "editorDiscardConfirm": "放棄未儲存變更？", "shareReadyTitle": "連結已就緒", "shareReadyDesc": "複製後傳送。持有連結者即可下載。", "shareReadyBadge": "已建立", "shareProtected": "已設密碼", "shareOpenAccess": "無密碼", "shareLinkLabel": "公開連結", "shareCopyHint": "可點選欄位或按「複製」。", "shareAgain": "再建一個", "shareCreatedToast": "分享連結已建立", "linkCopied": "已複製連結", "linkCopyFailed": "無法自動複製，請手動選取複製", "shareExpireLabel": "連結有效期", "shareExpireHint": "到期後連結失效", "shareExpireNever": "永不過期", "shareExpire1h": "1 小時", "shareExpire1d": "1 日", "shareExpire7d": "7 日", "shareExpire30d": "30 日", "shareExpireCustom": "自訂…", "shareExpireAt": "到期時間", "shareExpireInvalid": "請選擇未來的日期時間", "shareExpiresAt": "到期 {{at}}", "colExpires": "到期", "pdfInlineHint": "若瀏覽器未能內嵌顯示 PDF，請下載查看。", "publicShareTitle": "有人與你分享檔案", "publicShareSub": "透過安全連結下載，無需登入", "publicShareChecking": "檢查連結…", "publicShareDownloading": "下載中…", "publicShareWait": "請稍候", "publicShareNeedPassword": "此連結需要密碼才能下載", "publicSharePasswordPh": "分享密碼", "publicShareDownload": "下載", "publicShareDownloadAgain": "再次下載", "publicShareDone": "下載已開始", "publicShareDoneHint": "請查看瀏覽器下載列；若未出現可再按一次", "publicShareNotFound": "分享不存在或已過期", "publicShareDenied": "無法存取此分享", "publicShareBadPassword": "密碼錯誤", "publicShareMissing": "連結無效", "publicShareFailed": "下載失敗（{{status}}）", "publicShareFailedGeneric": "下載失敗", "publicShareDefaultName": "下載", "publicSharePanelLogin": "登入控制面", "publicShareLang": "語言", "publicShareProgress": "{{loaded}} / {{total}}（{{pct}}%）", "publicShareProgressIndeterminate": "已接收 {{loaded}}…", "publicShareCancel": "取消", "publicShareCancelled": "已取消下載", "publicSharePoweredBy": "由 {{company}} 提供", "publicSharePoweredPrefix": "由 ", "publicSharePoweredSuffix": " 提供", "publicShareHasAccount": "已有帳號？登入", "password": "密碼", "editorLines": "{{count}} 行", "editorLargeHint": "檔案較大，編輯可能較慢。超過約 2 MB 請改用下載（伺服器上限）。", "editorLnCol": "行 {{line}}，欄 {{col}}", "editorSpaces": "空格：{{n}}", "copyLink": "複製連結", "versionsTitleShort": "版本歷程", "versionsCount": "{{count}} / {{max}} 版", "versionN": "第 {{n}} 版", "versionLatest": "最新", "shareModeLabel": "下載方式", "shareModeDirect": "直接下載", "shareModeBt": "BitTorrent（WebTorrent）", "shareModeBoth": "直接下載 + BitTorrent", "shareModeHint": "BT 需要運行中的 Tracker（檔案 → BT Tracker）。持有 magnet 連結者即可下載，請慎用密碼與有效期。", "shareModeBtBlocked": "Tracker 未運行 — 請先啟動，或改選僅直接下載。", "shareMagnet": "Magnet 連結", "shareTorrentFile": "下載 .torrent", "shareSeedStatus": "做種狀態", "shareBtStats": "BitTorrent 狀態", "btSeeds": "種子", "btLeechers": "下載者", "btPeers": "同行", "btUploadSpeed": "上傳速度", "btDownloadSpeed": "下載速度", "btUploaded": "已上傳", "btDownloaded": "已下載", "btRatio": "分享率", "btUpdatedAt": "更新時間", "btServerStats": "伺服器做種", "btClientStats": "你的客戶端", "btSeeding": "做種中", "btPending": "做種準備中", "btStopped": "已停止做種", "btError": "做種錯誤", "publicShareMethod": "請選擇下載方式", "publicShareDirect": "直接下載", "publicShareBt": "BT", "openBtTracker": "開啟 BT Tracker", "publicShareBtInBrowser": "在瀏覽器以 WebTorrent 下載", "publicShareBtProgress": "已下載 {{pct}}% · {{peers}} 個 peers · ↓ {{down}} · ↑ {{up}}", "publicShareBtStarting": "正在連接 peers…", "publicShareBtFailed": "WebTorrent 失敗：{{detail}}", "publicShareBtNeedMagnet": "此分享沒有 magnet 連結", "publicShareBtUnsupported": "此瀏覽器無法執行 WebTorrent；請改用 magnet 或 .torrent", "btNone": "—", "uploadStatusSkipped": "已略過", "uploadStatusCancelled": "已取消", "conflict": { "titleFile": "已有名為「{{name}}」的項目", "titleFolder": "已有名為「{{name}}」的資料夾", "descFile": "請選擇處理方式。在選擇「取代」之前不會覆寫現有檔案。", "descFolder": "請選擇處理方式。「合併」會保留現有資料夾，再處理其中的檔案。", "incoming": "即將加入", "existing": "已在此處", "kindFile": "檔案", "kindFolder": "資料夾", "skip": "略過", "skipHint": "不加入此項目", "keepBoth": "兩者都保留", "keepBothHint": "將新項目存成 {{name}}", "replace": "取代", "replaceHint": "覆寫現有檔案。可以時會保留版本快照。", "replaceFolderHint": "覆寫資料夾內的同名檔案，其餘檔案會保留。", "merge": "合併", "mergeHint": "保留現有資料夾，並將新檔案加入其中", "applyAll": "套用到其餘所有撞名", "applyAllHint": "此次拖放或複製／移動的其餘項目都用同一做法", "cancelRest": "取消其餘項目", "progress": "第 {{current}}／{{total}} 項", "typeMismatch": "此處已有名為「{{name}}」的{{destKind}}，即將加入的是{{incomingKind}}。", "skipped": "已略過", "cancelled": "已取消" }, "webdavReissueUnchanged": "重新簽發後權杖編號未變——寫入可能未生效，請再試一次。", "webdavDisableFailed": "停用後狀態仍為啟用——寫入可能未生效，請再試一次。" }, "firewall": { "profiles": { "web": { "label": "Web 主機", "short": "SSH · 80 · 443" }, "mail": { "label": "Web + 郵件", "short": "另開 25/465/587/993" }, "ftps": { "label": "網絡+FTPS", "short": "21 + PASV 30000–30100" } }, "appliedProfile": "已套用設定檔：{{label}}", "backToProtection": "防護中心", "statRules": "規則", "statDenyIps": "永久拒 IP", "statAllow": "允許", "statDeny": "拒絕", "statDefaultIn": "入站預設", "defaultNotApplied": "未套用（UFW 關閉）", "ufwOffHint": "UFW 關閉時入站預設不會生效", "executeOn": "開", "executeOff": "關", "ufwDisabled": "已停用 UFW", "ufwEnabled": "已啟用 UFW", "disableUfw": "停用 UFW", "enableUfw": "啟用 UFW", "notInstalled": "UFW 尚未安裝", "toolHintPrefix": "底層工具：", "toolHintBody": "UFW 管埠同永久規則。攻擊應變與自動封鎖請用防護中心。", "toolHintfail2ban": "日誌臨時封鎖", "toolHintFail2ban": "日誌臨時封鎖", "executeOffHint": "系統變更未開 — 可看狀態，改規則需 管理員權限與系統變更權限已開啟", "tabs": { "rules": "規則表", "ports": "開埠", "deny": "永久拒 IP", "profiles": "設定檔", "about": "說明", "services": "服務" }, "currentRules": "目前規則", "rulesSourceHint": "UFW 編號規則（ufw status numbered）", "colAction": "動作", "colTo": "目標", "colFrom": "來源", "deleteShort": "刪除", "denyBadge": "拒絕", "emptyRulesTitle": "無規則或無權讀取", "emptyRulesInstalled": "UFW 未啟用，或需要管理員權限讀取", "emptyRulesNotInstalled": "安裝 UFW 後再整理", "allowPortTitle": "允許埠", "protocol": "協議", "protoBoth": "兩者", "protoBothLabel": "TCP+UDP", "port": "埠", "portHint": "選常用埠，或下面自訂", "portHintYsk": "YSK 服務埠一覽（Panel／Web／SSH／郵件／FTP／DNS／DB／Redis）；可自訂埠號", "privatePortWarn": "{{service}} 預設宜只聽內網；公開 allow 有風險。建議填寫來源 IP／CIDR。", "privatePortWarnWithFrom": "{{service}} 將只允許指定來源；仍請確認 IP／CIDR 正確。", "allowFrom": "來源 IP／CIDR（可選）", "allowFromHint": "留空 = 全部來源；填寫後只允許該 IP 或網段連入此埠", "allowFromPlaceholder": "例 203.0.113.10 或 10.0.0.0/8", "customPort": "自訂埠號（例 8080 或 30000:30100）", "allowedPort": "已允許 {{proto}}/{{port}}", "allowedPortFrom": "已允許 {{proto}}/{{port}}（來源 {{from}}）", "allowThisPort": "允許此埠", "allowPortHint": "預設 Web 主機應保留 22／80／443；DB／Redis／Panel 請用來源 IP 限制，勿對全世界 allow。", "denyTitle": "永久拒絕 IP", "denySub": "UFW DENY · 與 fail2ban 臨時 封鎖 不同", "denyPlaceholder": "要拒絕的 IPv4 或 IPv6", "deniedOk": "已永久拒絕", "removedDeny": "已移除 DENY", "remove": "移除", "noDenyRules": "未有永久拒 IP 規則", "oneClickProfiles": "一鍵設定檔", "oneClickDesc": "寫入管理腳本並套用 UFW（不會裝 fail2ban — 請到 fail2ban 頁）", "customApply": "自訂套用", "allowSmtp": "允許 SMTP／IMAP 埠", "extraTcp": "額外 TCP 埠", "extraTcpHint": "點選預設組合；可再自訂逗號／範圍", "noExtra": "無額外", "mailGroup": "郵件組", "customExtraPlaceholder": "自訂：8080,9000:9010", "appliedCustom": "已套用自訂規則", "applyToSystem": "套用到系統", "deletedRule": "已刪 #{{n}}", "deleteRuleTitle": "刪規則 #{{n}}？", "deleteRuleDesc": "將從 UFW 移除該規則編號（需系統變更權限）。", "servicesTitle": "受管服務埠", "servicesHint": "YSK 管理服務的預期網絡暴露。開啟服務時會自動同步這些規則。", "servicesUfwOff": "UFW 已關閉。此列表只是預期暴露，並非主機上已強制執行的規則。", "servicesEmpty": "尚未有服務暴露資料", "servicesEmptyDesc": "啟動受管服務（Web、FTPS、VPN、資料庫…）後會出現在此列表。", "servicesManualHint": "手動開埠 chips 在「埠」分頁 — 建議在此管理，規則會帶 ysk-svc 標記。", "portsManualHint": "進階手動規則。受管軟件請優先用「服務」分頁。", "colService": "服務", "colMode": "模式", "colPorts": "埠", "colSync": "狀態", "synced": "已同步", "syncNow": "立即同步", "disableConfirmTitle": "停用 UFW？", "disableConfirmDesc": "主機防火牆將停止過濾流量。若主機在公眾網絡上，SSH 與面板可能直接暴露。", "disableConfirmConsequence": "現有允許／拒絕規則仍會保留，但要重新啟用 UFW 才會生效。", "desiredOnlyUfwOff": "設定：{{mode}} · UFW 關閉（未套用）", "syncNotApplied": "UFW 關閉 · 未套用" }, "ftp": { "title": "FTPS 帳戶", "accountsCount": "{{count}} 帳戶", "accounts": "帳戶", "applied": "已套用", "pendingApply": "待套用", "sftpKeys": "SFTP 鑰", "softwareMissing": "尚未安裝 FTPS 服務所需軟件", "ftpAccounts": "FTP 帳戶", "sftpPubkeys": "SFTP 公鑰", "homeDir": "家目錄", "domain": "網域", "user": "用戶", "keyFingerprint": "金鑰指紋（前綴）", "createHint": "請先在「FTP 帳戶」分頁建立帳戶，再回來登記公鑰。", "pubkeyHint": "點「+ 新增公鑰」，選擇 FTP 用戶並貼上 ssh-ed25519 或 ssh-rsa 公鑰整行。", "sftpKeyInvalid": "需要用戶名，以及以 ssh- 開頭的公鑰。", "quickSelect": "快速選擇帳戶", "quickSelectHint": "點用戶名帶入新增公鑰表單", "editAccount": "編輯 FTP 帳戶", "createAccount": "建立 FTP 帳戶", "accountModalDesc": "網域與家目錄請從清單選擇；無清單時可手填。儲存後需「套用」才寫入 vsftpd", "usernameHintCreate": "英數、點、底線、減號；建立後不可改", "usernameHint": "英數、點、底線、減號", "newPasswordOptional": "新密碼（可留空）", "passwordKeepHint": "留空表示不變更", "passwordMin8": "至少 8 字元", "domainHint": "對應站點或郵件網域，用於分組與路徑建議", "domainPh": "可先建立站點／郵件網域，或暫時輸入", "homeHint": "用戶登入後的根目錄（chroot 後可見範圍）", "addPubkey": "新增 SFTP 公鑰", "addPubkeyDesc": "選擇帳戶、可選備註，並貼上完整公鑰一行。寫入管理檔不代表已驗證可連線。", "pubkeyAdded": "已新增公鑰", "ftpUsername": "FTP 用戶名", "ftpUsernameHint": "須與已登記的 FTP 帳戶相同", "ftpUsernamePh": "與 FTP 帳戶相同", "note": "備註", "noteHint": "方便辨識裝置，例如 筆電／公司", "notePh": "筆電 / 公司主機", "sshPubkey": "遠端登入 公鑰", "sshPubkeyHint": "通常來自 ~/.ssh/id_ed25519.pub，整行貼上", "deleteAccountTitle": "刪除 FTP 帳戶？", "deleteAccountNamed": "刪除 FTP 帳戶 {{name}}？", "deleteAccountDesc": "移除後請再套用", "deleteKeyTitle": "刪除 SFTP 公鑰？", "deleteKeyDesc": "會從管理檔移除；系統 authorized_keys 可能仍需重載才生效。", "serviceTitle": "vsftpd 服務", "softwareMissingService": "FTPS 所需軟件尚未安裝", "lifecycle": "生命週期", "overview": "概覽", "network": "網絡", "security": "安全", "installStart": "安裝與啟動", "listenPort": "監聽埠", "accountCount": "帳戶數", "loginBanner": "登入橫幅", "sslDomain": "SSL 網域", "plaintextInsecure": "明文 FTP（未開 TLS）— 不安全。對外開放 21 埠前請先啟用 FTPS。", "plaintextPublicLive": "vsftpd 正以公網位址監聽且未啟用 FTPS，帳號密碼會明文傳送。請啟用 FTPS、改為僅本機監聽，或輸入 PLAINTEXT 確認後維持此狀態。", "bindAddress": "監聽範圍", "bindAddressHint": "新安裝預設僅本機。對外監聽且未開 FTPS 需打字確認。", "bindLocal": "僅本機", "bindLocalHint": "127.0.0.1 — 本機測試可不開 TLS", "bindPublic": "公開", "bindPublicHint": "全部介面 — 請啟用 FTPS，或確認 PLAINTEXT", "enableFtpsAndStart": "啟用 FTPS 並啟動", "publicPlainNeedConfirm": "公開明文 FTP 需輸入 PLAINTEXT 確認", "plainConfirmTitle": "未開 FTPS 就對外啟動 FTP？", "plainConfirmDesc": "21 埠會在公網位址接受明文登入與傳輸。", "plainConfirmC1": "網絡上可見用戶名與密碼。", "plainConfirmC2": "PASV 會通告已設定的公網 IP。", "plainConfirmC3": "不會代你開主機防火牆或雲安全組。", "plainConfirmAction": "啟動明文 FTP", "pasvRange": "PASV 範圍", "forceTls": "強制 TLS", "allowWrite": "允許寫入", "networkTitle": "網絡設定", "networkDesc": "監聽埠與 PASV 被動模式；儲存只改管理設定，套用才寫入 vsftpd 並重啟", "listenPortHint": "預設 21；若防火牆另開埠請一併放行", "customPort": "自訂埠", "ipStack": "IP 棧", "ipStackHint": "vsftpd 多數版本 listen 與 listen_ipv6 互斥；IPv6 用 listen_ipv6=YES。", "listenConflictLive": "現行 vsftpd.conf 為 listen={{v4}}、listen_ipv6={{v6}} — 兩者同時 YES 無法啟動。", "listenConflictNeedFix": "請先修正 listen／listen_ipv6（不可同時 YES），再套用。", "fixListenIpv4": "只用 IPv4（listen=YES，listen_ipv6=NO）", "liveFileValue": "檔案現值：{{value}}", "startBlockedFailed": "服務已失敗 — 請先套用有效設定再啟動", "ftpsNeedCert": "請先選擇憑證網域", "ipv4Only": "僅 IPv4", "ipv6Mapped": "IPv6（可 mapped）", "bannerHint": "連線成功後客戶端可見的歡迎字串", "pasvStart": "PASV 起始埠", "pasvStartHint": "被動模式資料通道起始", "customStart": "自訂起始", "pasvEnd": "PASV 結束埠", "pasvEndHint": "需 ≥ 起始埠；防火牆需放行此範圍", "openFirewallPage": "打開防火牆頁", "customEnd": "自訂結束", "pasvPublicIp": "PASV 公網 IP", "detectPublicIp": "偵測公網 IP", "detectPublicIpTitle": "填入本機第一個非回環 IPv4", "pasvPublicIpHint": "NAT／雲主機可填公網 IP；本機可留空", "pasvIpRequired": "套用前請填 PASV 公網 IP（NAT／雲主機）。可偵測或人手輸入。", "optionalEmpty": "（可留空）", "securityTitle": "安全設定", "securityDesc": "TLS、寫入權限與 chroot；變更後請套用並重啟才會生效", "sslCertDomain": "SSL 憑證域名", "sslCertDomainHint": "選已上傳／申請的憑證網域", "enableFtps": "啟用 FTPS（SSL/TLS）", "enableFtpsDesc": "以 TLS 加密控制通道；建議開啟", "forceTlsLogin": "強制 TLS 登入", "forceTlsLoginDesc": "拒絕明文 FTP；需客戶端支援 FTPS", "allowWriteDesc": "關閉則帳戶僅能下載／列目錄", "chrootUsers": "Chroot 用戶", "chrootUsersDesc": "登入後鎖在家目錄，無法瀏覽系統其他路徑", "writableChroot": "允許可寫 chroot", "writableChrootDesc": "家目錄可寫時仍啟用 chroot（vsftpd 常見需求）", "settingsSaved": "已儲存設定", "installIncomplete": "無法完成安裝", "ftpsReady": "FTPS 已就緒", "settingsApplied": "已套用設定", "opsResult": "操作結果", "saved": "已儲存", "accountsList": "帳戶列表", "accountsListDesc": "建立後按「套用」同步到 vsftpd。若尚未安裝，請到「軟件」分頁安裝 vsftpd。", "startService": "啟動。", "createAccountPlus": "+ 建立帳戶", "noFtpAccounts": "尚未有 FTP 帳戶", "noFtpAccountsDesc": "用列表右上角「建立帳戶」新增；可指定家目錄與網域，再套用到系統。", "applyHint": "提示：套用只寫入管理設定；真正聽埠需 vsftpd 服務為 active。", "sshdMatchNote": "；系統 sshd Match 設定後才真正生效。", "addPubkeyPlus": "+ 新增公鑰", "noPubkeys": "尚未登記公鑰", "pickDomain": "— 選擇網域 —", "currentDomain": "{{domain}}（目前）", "pickHome": "— 選擇家目錄 —", "currentHome": "{{path}}（目前）", "fullPath": "完整路徑：", "emptyHomes": "若清單為空，請先建立專案或站點以產生家目錄選項。", "pickAccount": "— 選擇帳戶 —", "installFtpsBanner": "請使用上方橫幅「一鍵安裝」安裝 FTPS，完成後再啟動服務。", "applyRestart": "套用並重啟", "afterInstall": "安裝後即可使用 FTPS 帳戶登入。需系統管理員權限才能完成安裝。", "saveSettings": "儲存設定", "saveApplyHint": "儲存只更新面板設定；「套用並重啟」才寫入 vsftpd.設定檔 並重載服務。", "installAndStart": "安裝並啟動", "manageAccounts": "帳戶", "openFirewallPorts": "開防火牆埠", "firewallPortsApplied": "已放行 TCP {{ports}}", "sftpTabDesc": "為 FTP 帳戶登記 SSH 公鑰，以便用 SFTP 免密登入。請先選帳戶、貼上公鑰一行，再儲存。", "sftpNeedAccountTitle": "尚無 FTP 帳戶", "sftpNeedAccount": "請先建立至少一個 FTP 帳戶，再為該用戶登記公鑰。", "sftpFilterLabel": "帳戶", "sftpFilterAll": "全部帳戶", "sftpKeyCount": "{{count}} 枚公鑰", "sftpEmptyFiltered": "此帳戶尚未有公鑰", "sftpEmptyFilteredDesc": "「{{user}}」還沒有登記的 SSH 公鑰。", "sftpRegister": "登記公鑰", "sftpAddedAt": "新增於 {{time}}", "sftpTechSummary": "技術細節（進階）", "sftpTechNote": "公鑰會寫入管理路徑", "filterProject": "只顯示此專案的 FTP 帳戶", "clearProjectFilter": "顯示全部帳戶", "vsftpdFailedHint": "vsftpd 服務失敗。請到服務分頁查看設定與日誌（listen 與 listen_ipv6 不可同時為 YES）。", "vsftpdFailedGeneric": "vsftpd 服務失敗。請到服務分頁查看現行設定與日誌。", "stateFailed": "啟動失敗", "tabService": "服務" }, "geo": { "continents": { "AS": "亞洲", "EU": "歐洲", "NA": "北美洲", "SA": "南美洲", "AF": "非洲", "OC": "大洋洲", "AN": "南極洲" }, "countries": { "CN": "中國", "HK": "香港", "MO": "澳門", "TW": "台灣", "JP": "日本", "KR": "南韓", "KP": "北韓", "SG": "新加坡", "MY": "馬來西亞", "TH": "泰國", "VN": "越南", "PH": "菲律賓", "ID": "印尼", "IN": "印度", "AU": "澳洲", "NZ": "紐西蘭", "US": "美國", "CA": "加拿大", "MX": "墨西哥", "BR": "巴西", "AR": "阿根廷", "GB": "英國", "IE": "愛爾蘭", "DE": "德國", "FR": "法國", "NL": "荷蘭", "BE": "比利時", "CH": "瑞士", "AT": "奧地利", "SE": "瑞典", "NO": "挪威", "DK": "丹麥", "FI": "芬蘭", "PL": "波蘭", "CZ": "捷克", "ES": "西班牙", "PT": "葡萄牙", "IT": "意大利", "RU": "俄羅斯", "UA": "烏克蘭", "TR": "土耳其", "IL": "以色列", "AE": "阿聯酋", "SA": "沙特", "EG": "埃及", "ZA": "南非", "NG": "尼日利亞", "PK": "巴基斯坦", "BD": "孟加拉", "IR": "伊朗", "IQ": "伊拉克", "RO": "羅馬尼亞", "BG": "保加利亞", "HU": "匈牙利", "GR": "希臘", "LT": "立陶宛", "LV": "拉脫維亞", "EE": "愛沙尼亞", "BY": "白俄羅斯", "KZ": "哈薩克", "UZ": "烏茲別克", "CL": "智利", "CO": "哥倫比亞", "PE": "秘魯", "VE": "委內瑞拉", "CU": "古巴", "SC": "塞舌爾", "PA": "巴拿馬" }, "regions": { "CN-BJ": "北京", "CN-SH": "上海", "CN-TJ": "天津", "CN-CQ": "重慶", "CN-GD": "廣東", "CN-ZJ": "浙江", "CN-JS": "江蘇", "CN-SD": "山東", "CN-HN": "河南", "CN-HB": "湖北", "CN-HU": "湖南", "CN-SC": "四川", "CN-HE": "河北", "CN-FJ": "福建", "CN-AH": "安徽", "CN-JX": "江西", "CN-LN": "遼寧", "CN-JL": "吉林", "CN-HL": "黑龍江", "CN-SX": "山西", "CN-SN": "陝西", "CN-GS": "甘肅", "CN-QH": "青海", "CN-HA": "海南", "CN-YN": "雲南", "CN-GZ": "貴州", "CN-GX": "廣西", "CN-NX": "寧夏", "CN-XJ": "新疆", "CN-XZ": "西藏", "CN-NM": "內蒙古", "TW-TPE": "台北", "TW-TXG": "台中", "TW-KHH": "高雄", "HK-HK": "香港", "MO-MO": "澳門", "US-CA": "California", "US-NY": "New York", "US-TX": "Texas", "US-FL": "Florida", "US-WA": "Washington", "US-IL": "Illinois", "US-VA": "Virginia", "US-OR": "Oregon", "US-GA": "Georgia", "US-NJ": "New Jersey", "US-MA": "Massachusetts", "US-OH": "Ohio", "US-PA": "Pennsylvania", "US-AZ": "Arizona", "US-CO": "Colorado", "US-NC": "North Carolina", "US-MI": "Michigan", "US-NV": "Nevada", "JP-13": "東京", "JP-27": "大阪", "JP-14": "神奈川", "JP-23": "愛知", "KR-11": "首爾", "KR-26": "釜山", "SG-01": "Singapore", "AU-NSW": "New South Wales", "AU-VIC": "Victoria", "GB-ENG": "England", "DE-BE": "Berlin", "DE-BY": "Bayern", "RU-MOW": "Moscow", "RU-SPE": "St Petersburg" } }, "hostBrowse": { "tabBrowse": "主機瀏覽", "subtitle": "經主機出站代理瀏覽外網或內網；目標站不會看見你本機瀏覽器身分。", "modeInternet": "外網", "modeIntranet": "內網", "modeHint": "外網會拒絕私網 IP；內網可開啟 LAN。兩者均拒絕 cloud metadata。", "urlPlaceholder": "https://example.com 或 192.168.1.1", "go": "前往", "back": "返回", "forward": "前進", "reload": "重新整理", "stop": "停止", "clearCookies": "清除 Cookie", "clearCookiesConfirm": "這會清除此代瀏覽工作階段在主機上的 Cookie。已登入的網站需要重新登入。", "closeSession": "關閉工作階段", "copyUrl": "複製網址", "newSession": "新工作階段", "privacyOn": "私隱代瀏覽", "viaHost": "經主機", "emptyTitle": "主機代瀏覽", "emptyBody": "請輸入網址。DNS、TLS 與出站由本伺服器處理，而非你的桌面瀏覽器。Cookie 僅存於伺服器 jar。", "needUrl": "請先於上方輸入網址開始工作階段。", "ssrfBlocked": "已由安全政策攔截（SSRF／模式）", "loadFailed": "主機擷取失敗", "sessionReady": "工作階段就緒", "noSession": "尚未建立工作階段", "statusLine": "{{status}} · {{ms}}ms · {{type}} · 經主機", "cookies": "Cookie", "latency": "延遲", "locked": "HTTPS", "insecure": "HTTP", "loading": "載入中…", "modeSwitchHint": "切換模式會開啟新工作階段並清除 Cookie。", "copied": "已複製網址", "downloadHint": "非 HTML 回應 — 請查看內容框或重新導航。", "engineLabel": "引擎", "engineProxy": "代理", "engineBrowser": "真實瀏覽器", "engineSwitchHint": "切換引擎會開啟新工作階段。", "needChrome": "真實瀏覽器需要系統 Chrome／Chromium（或於設定指定路徑）。否則請使用代理模式。", "engineBrowserNeedChrome": "真實瀏覽器（未安裝 Chrome）", "egressHint": "目標站會看見此伺服器的出站位址（{{host}}），不是你本機。Cookie 留在伺服器工作階段。", "needChromeFallback": "Chrome 不可用 — 已切換至代理引擎。", "liveError": "即時串流失敗", "liveWaiting": "正在連線至主機瀏覽器…", "tabSettings": "設定", "softwareNeeded": "真實瀏覽器引擎需要 Chromium／Chrome", "softwareHint": "一鍵經 apt 安裝發行版 Chromium。若已安裝 Google Chrome 亦會自動偵測。需要超級用戶與系統變更權限。", "closeNoSession": "尚未建立工作階段", "goInstallChrome": "前往軟件分頁", "settingsIntro": "以下面板設定會覆寫主機瀏覽相關環境變數。", "settingsEngine": "預設引擎", "engineAuto": "自動", "settingsChromePath": "Chrome／Chromium 路徑", "settingsChromePathHint": "留空 = 自動偵測。例如 /usr/bin/google-chrome", "settingsLoopback": "內網模式允許 loopback（127.0.0.1）", "settingsNoSandbox": "Chromium --no-sandbox（僅限 container）", "settingsSave": "儲存設定", "settingsSaved": "主機瀏覽設定已儲存", "envHintsTitle": "程序環境變數（唯讀；面板已設定時優先採用面板值）", "stream": { "label": "畫質", "smooth": "流暢", "balanced": "均衡", "sharp": "高清" }, "zoom": { "label": "縮放", "fit": "適合窗口", "fill": "填滿" }, "retryNav": "重試導航", "retryLive": "重連畫面", "tryProxy": "改用代理引擎", "err": { "LIVE_NO_FRAME": "畫面串流逾時：尚未收到主機畫面。請重連畫面或重試導航。", "LIVE_WS_FAIL": "即時連線失敗。請重連畫面。", "SSRF_BLOCKED": "目標位址已被安全政策攔截。", "BOT_CHALLENGE": "目標頁面可能要求人機驗證或阻擋自動化瀏覽；請在畫面上完成驗證，或改用其他網絡。", "TIMEOUT": "載入逾時。請重試。", "DNS_FAIL": "網域名稱解析失敗。", "TLS_FAIL": "安全連線（TLS）失敗。", "NAV_FAIL": "導航失敗。", "CHROME_LAUNCH": "無法啟動主機 Chromium。請檢查軟件安裝與 no-sandbox 設定。", "SESSION_GONE": "工作階段已失效。請重新前往。", "NEED_CHROME": "需要安裝 Chrome／Chromium。" }, "home": "主頁", "bookmark": "書籤", "bookmarkAdd": "加入或移除書籤", "bookmarkList": "書籤清單", "bookmarks": "書籤", "history": "瀏覽記錄", "bookmarkToggled": "已更新書籤", "newTab": "新分頁", "fullscreen": "全螢幕", "mediaNote": "真實瀏覽器：視訊會串流到面板。在設定啟用音訊橋接即可聽到頁面聲音（需使用者操作）。", "isolationNote": "真實瀏覽器會建立臨時 Linux 用戶隔離 Chrome；離開頁面或逾時會結束並刪除該用戶。", "resumeHint": "可恢復上次瀏覽（{{count}} 個分頁）", "resumeHintDetail": "可恢復上次瀏覽（{{count}} 個分頁）· {{url}} · {{when}}", "resumeHintOwned": "可恢復 {{user}} 上次瀏覽（{{count}} 個分頁）· {{url}} · {{when}}", "clearSessionData": "清除工作階段資料", "clearSessionConfirm": "這會捨棄上一工作階段的還原快照，之後不能還原那些分頁。", "resume": "恢復", "resumeDismiss": "關閉", "resumeDone": "已恢復工作階段", "settingsSafety": "瀏覽安全", "settingsSafetyHint": "嚴格會封鎖更多高風險主機；寬鬆允許更廣的內網目標。不會關閉雲端中繼資料的 SSRF 防護。", "safetyStrict": "嚴格", "safetyStandard": "標準", "safetyRelaxed": "寬鬆", "settingsBlockHosts": "封鎖主機後綴", "settingsBlockHostsHint": "每行一個主機名稱或後綴（例如 malware.test）。精確與後綴符合均會封鎖。", "settingsAllowDangerousDownloads": "允許高風險下載（執行檔／腳本）", "settingsAudioBridge": "將頁面音訊橋接到面板", "settingsAudioBridgeHint": "把主機 Chrome 音訊串流到此瀏覽器。部分網站需點選才能解鎖播放。", "downloads": "下載", "downloadsEmpty": "此工作階段尚無下載", "downloadReady": "就緒", "downloadBlocked": "已封鎖", "downloadPending": "處理中", "downloadFailed": "失敗", "downloadSave": "儲存", "audioUnlock": "啟用聲音", "audioUnlockHint": "點選以解鎖此分頁音訊播放", "audioUnlocked": "音訊已解鎖", "audioPlaying": "正在播放音訊", "audioNeedsUnlock": "音訊需解鎖", "audioBridgedHint": "頁面音訊已由主機瀏覽器橋接", "audioNotBridged": "音訊關閉", "audioNotBridgedHint": "在設定中開啟音訊橋接即可聽到頁面聲音", "mediaPolicyTitle": "真實瀏覽器媒體", "mediaVideoLabel": "視訊", "mediaVideoDesc": "在主機上算圖，再以畫面串流到面板。", "mediaAudioLabel": "音訊", "mediaAudioDesc": "可選用來自主機 Chrome 的橋接；可能需要解鎖點選。", "mediaPolicyLabel": "政策", "mediaPolicyDesc": "下載與自動播放遵循上方安全與下載設定。", "frameBlocked": "頁面無法在面板框架內顯示。", "historyEmpty": "此工作階段尚無瀏覽記錄。", "bookmarksEmpty": "尚未有書籤。", "closeSessionHint": "會清掉此瀏覽工作階段的 Cookie；書籤會保留。", "envUnset": "未設定", "envPanelValue": "面板：{{value}}", "envColVar": "變數", "envColHost": "主機程序", "envColPanel": "面板設定", "envColEffective": "生效值", "settingsNoSandboxWarn": "會關閉 Chromium 沙箱。只應在可信的 container 內使用。下次真實瀏覽器工作階段才生效。", "settingsDangerDlWarn": "允許經主機瀏覽器下載執行檔與腳本。請確認確實需要。", "settingsDangerConfirmTitle": "啟用高風險瀏覽設定？" }, "legal": { "hubTitle": "法律文件", "hubSub": "YSK Server 的使用條款、私隱政策與免責聲明", "terms": "使用條款", "privacy": "私隱政策", "disclaimer": "免責聲明", "updated": "最後更新日期：{{date}}", "englishPrevails": "正式語言為英文及香港書面中文。如有歧義，以英文為準。", "notOfficialLocale": "你的介面語言並非正式法律語言。除非你切換，以下具約束力的文本為英文。", "officialLang": "正式文本", "officialEn": "English", "officialZh": "繁體中文（香港）", "signIn": "登入", "mitNote": "原始碼以 MIT 授權。本頁為額外使用條件。", "backToIndex": "全部法律文件" }, "listToolbar": { "searchPlaceholder": "搜尋…", "searchAria": "搜尋列表", "clearSearch": "清除搜尋", "clearAll": "清除篩選", "resultCount": "{{count}} 項結果", "showingOf": "顯示 {{shown}} / {{total}}", "activeFilters": "已套用 {{count}} 個篩選", "noResults": "無符合結果", "noResultsHint": "試下其他關鍵字，或者清除篩選。", "searching": "搜尋中…", "emptyChip": "此篩選沒有項目" }, "logViewer": { "banIpTitle": "到防護中心封鎖 {{ip}}", "filter": "篩選", "filterPh": "關鍵字", "levels": "級別", "wrap": "換行", "follow": "跟隨", "download": "下載", "nextError": "下一則錯誤", "prevError": "上一則錯誤", "lines": "{{n}} 行", "shown": "顯示 {{n}}", "errors": "錯誤 {{n}}", "warnings": "警告 {{n}}", "all": "全部", "empty": "沒有日誌行" }, "login": { "title": "登入 YSK Server", "subtitle": "伺服器控制台", "username": "用戶名", "password": "密碼", "submit": "登入控制台", "failed": "登入失敗，請檢查帳號或密碼", "footer": "產品由 YSK Limited 提供", "totpRequired": "此帳戶已開啟 雙重驗證，請輸入 6 位驗證碼", "totpLabel": "雙重驗證碼", "totpHint": "Authenticator 應用程式中的 6 位數字", "submitting": "登入中…", "sessionExpired": "登入已失效，請重新登入", "newPassword": "新密碼", "newPasswordAgain": "再次輸入新密碼", "changePassword": "更改密碼", "passwordMismatch": "兩次輸入的密碼不一致", "passwordChanged": "密碼已更新" }, "logs": { "catSystem": "系統檔", "catMail": "郵件", "catSecurity": "安全", "catApp": "應用", "catOther": "其他", "journalService": "系統日誌 服務", "unavailable": "不可用", "compressed": "· 壓縮", "noLogFileYet": "（尚未有 日誌 檔）", "afterDeploy": "部署後會出現", "logsLoaded": "已載入日誌", "sseFailed": "SSE 串流失敗，改用輪詢", "sseInterrupted": "SSE 中斷", "settingsSaved": "設定已儲存", "exportedJsonl": "已匯出 JSONL", "exported": "已匯出", "bookmarkSaved": "已存書籤", "title": "日誌中心", "fullAccess": "完整權限", "nonRoot": "非 管理員", "noExecute": "無 執行", "error": "錯誤", "projectLog": "專案 日誌", "filesCount": "{{count}} 檔", "tabExplore": "探索", "tabMaint": "維護", "tabSettings": "設定", "tabAbout": "說明", "sources": "日誌來源", "filterPlaceholder": "篩選 服務單元 / 檔案…", "filterSources": "篩選來源", "noProjectLogs": "未發現專案 日誌 — 部署專案後會出現", "noMatchSources": "無匹配來源", "projectPrefix": "專案 ·", "timeRange": "時間範圍", "unlimited": "不限", "priority": "優先級", "all": "全部", "keywordIp": "關鍵字 / IP…", "custom": "自訂", "copied": "已複製", "truncated": "· 已截斷", "following": "· 跟隨中", "followingSse": "· 跟隨中 (SSE)", "loadingSources": "載入來源中…", "pickSource": "選左側來源，或按快捷 · 再按「查詢」", "maintOverview": "維護概況", "executable": "可執行", "restricted": "受限", "needRootExecute": "需要管理員權限+執行", "retention": "保留時間", "retentionHint": "例 7d · 14d · 30d", "defaultLines": "預設行數", "followInterval": "跟隨間隔", "maxBytes": "最大字節", "maskSecrets": "遮罩 secret", "defaultVacuumDays": "預設 清理 天數", "d7": "7 日", "d14": "14 日", "d30": "30 日", "d90": "90 日", "journalAlerts": "系統日誌 告警", "autoVacuum": "自動 清理", "deleted": "已刪", "bookmarkDeleted": "已刪書籤", "opsResult": "操作結果", "saveBookmark": "儲存書籤", "bookmarkNamePrompt": "為目前查詢條件命名", "query": "查詢", "follow": "跟隨", "export": "匯出", "vacuum": "清理（Vacuum）", "loadFailed": "載入失敗", "projectLogsLink": "專案 → 日誌", "projectLogsDesc": "— 單站快捷 + 深鏈", "queryFollow": "查詢與跟隨", "queryFollowDesc": "探索頁預設行數、跟隨節奏、回應上限", "retentionAlerts": "保留與告警", "retentionAlertsDesc": "清理 預設、系統日誌 磁碟告警、自動清理時間窗", "dailyNeedRoot": "每日（需要管理員權限 + 執行）", "customAllow": "自訂 allow 路徑", "customAllowDesc": "僅 /var/log 或 /run/log · 拒絕 .ssh、金鑰、/etc", "pathsCount": "{{n}} 條", "noCustomPaths": "尚未加入自訂路徑", "bookmarks": "書籤", "bookmarksDesc": "探索頁常用過濾；開啟會切回探索並套用來源", "noBookmarks": "尚未有書籤 — 在探索頁查詢後按「書籤」儲存", "settingsWriteNote": "設定寫入面板 資料庫；自動 清理 由排程每 15 分鐘檢查時間窗。", "saveSettings": "儲存設定", "vacuumDaysQ": "清理 時間 {{days}}？", "vacuumSizeQ": "清理 大小 500M？", "vacuumDesc": "journalctl 清理會刪除舊日誌，不可復原。", "vacuumRequested": "已請求 清理", "vacuumSizeRequested": "已請求 清理 size", "scLogs": "觀測 系統日誌／檔案／專案", "scProtection": "攻擊應變、自動 封鎖（點 IP）", "shortcuts": "快捷", "projectsOnly": "只顯示專案", "filesTitle": "{{n}} 檔", "bookmarksLabel": "書籤", "filter": "篩選", "followSec": "跟隨 {{sec}}s", "wrap": "換行", "bookmark": "書籤", "standby": "待命", "partialFail": "部分／失敗", "lines": "{{n}} 行", "followingSseDyn": "· 跟隨中{{sse}}", "ipBan": "IP → 封禁", "vacuumNote": "釋放 systemd-journald 佔用的磁碟。沒有系統變更權限時會封鎖，不會假裝成功。", "vacuumTime": "依保留時間清理", "vacuumNeedRetention": "請先填寫保留時間（例如 14d）", "vacuumNeedConfirm": "需確認 — 會刪除舊 journal 日誌", "vacuumSizeNeedConfirm": "需確認 — 會限制 journal 磁碟用量", "vacuumHint": "建議保留 ≥7 日；操作後重新探測磁碟用量。", "logrotateStatus": "系統 logrotate 狀態（唯讀探測）", "logrotateMissing": "無 狀態 檔或不可讀 — 可於服務矩陣檢查 logrotate 套件", "relatedOps": "相關運維", "relatedOpsDesc": "日誌觀測 vs 攻擊應變分工", "scLogsLine": "觀測 系統日誌／檔案／專案", "scProtLine": "攻擊應變、自動 封鎖（點 IP）", "journalVacuumTitle": "清理 journald 磁碟", "journalSection": "journal", "sseLabel": "SSE", "logrotateLabel": "對數旋轉", "srcNginx": "nginx", "srcSsh": "ssh", "srcfail2ban": "fail2ban", "srcFail2ban": "fail2ban", "srcAuthLog": "驗證日誌", "srcNginxError": "Nginx 錯誤日誌", "srcLetsEncrypt": "Let’s Encrypt 憑證日誌", "groupJournal": "journal", "groupVarLog": "/var/log", "prioErr": "錯誤+", "prioWarn": "警告+", "prioInfo": "資訊+", "vacuumSize": "限制至 500 MB", "logrotateNoStatus": "尚未有 logrotate 狀態檔（從未跑過時屬常見）。", "autoVacuumOff": "自動清理未啟用。啟用前時間設定不會執行。", "aboutAllowlist": "探索只可讀取允許清單內的 journal 單元與 /var/log 路徑，不會提供任意主機路徑。", "aboutCustomPath": "請在「設定」加入自訂路徑（僅限 /var/log 或 /run/log），再到「探索」開啟。", "noRowsInWindow": "此時間窗內無記錄", "showInactiveUnits": "顯示未啟動的服務單元", "sseNeedFollow": "請先開啟跟隨 — SSE 只用於即時尾隨", "vacuumSizeAlreadyBelow": "目前用量已低於上限，此操作不會刪除任何內容", "vacuumSizeNoopDesc": "journal 已低於 500 MB。確認後仍會執行 vacuum --size=500M，通常不會刪除任何內容。", "journalDiskHint": "systemd-journald 目前用量（現行 journal）。不包括 /var/log 下已輪轉的檔案。", "varLogDiskHint": "/var/log 估計用量（含已輪轉檔），屬約數。", "queryFirst": "請先查詢", "errorsWindowHint": "上次概覽探測的近期錯誤（切換分頁不會重算）", "sourceCount": "顯示 {{shown}}", "sourceUnavailable": "此來源尚未產生日誌", "sourceNoLog": "尚無日誌", "projectSourcesTitle": "{{n}} 個來源（檔案 + journal）", "logrotatePath": "路徑", "logrotateLast": "上次輪轉", "exportJsonl": "匯出 JSONL", "sseLive": "（即時串流）", "logrotateExpand": "再顯示 {{n}} 項", "logrotateCollapse": "收合", "logrotateVersion": "狀態版本 {{v}}" }, "metrics": { "alert": { "memory_high": "記憶體偏高", "load_high": "負載偏高", "disk_high": "磁碟偏高" }, "loadFailed": "載入指標失敗", "projectUsageFailed": "專案用量載入失敗", "procListFailed": "進程列表失敗", "streamEnded": "stream 已結束（{{reason}}）", "streamOpenFailed": "無法開啟 stream", "signalFailed": "訊號失敗", "detailFailed": "無法載入詳情", "alertCount": "{{count}} 則告警", "attention": "需留意", "normal": "正常", "disk": "磁碟", "alerts": "告警", "auto5s": "自動 5s", "hostSettings": "主機設定", "loading": "載入指標…", "tabs": { "overview": "概覽", "live": "即時進程", "disk": "磁碟", "projectUsage": "專案用量", "alerts": "告警" }, "load": "負載", "load1m": "負載 1 分鐘", "uptime": "運行時間", "filterCpu5": "≥5% CPU", "filterMem5": "≥5% 記憶體", "signalHint": "先勾選進程，再送 TERM 或 KILL。", "signalFromRow": "選取此進程以便送訊號", "selectForSignal": "選取", "forceKillTitleNamed": "KILL PID {{pid}}（{{cmd}}）？", "sendSigTitleNamed": "向 PID {{pid}}（{{cmd}}）送 TERM？", "min1": "1 分", "min5": "5 分", "min15": "15 分", "loadHint": "相對 {{cpus}} CPU；高於 1.0× 表示可能排隊。", "memory": "記憶體", "total": "總量", "available": "可用", "mainDisk": "主磁碟", "path": "路徑", "diskReadFail": "無法讀取磁碟", "viewAllMounts": "查看全部 {{count}} 個 mount →", "nAlerts": "{{count}} 告警", "details": "詳情", "noThresholdAlerts": "目前無記憶體／負載／磁碟閾值告警", "projectDisk": "專案磁碟（真實 du）", "viewAllProjectUsage": "查看全部專案用量 →", "loadProjectDisk": "載入專案磁碟用量（真實 du）→", "followSse": "跟隨（SSE）", "interval": "間隔", "sort": "排序", "rows": "行數", "onceQuery": "單次查詢", "procSearchPh": "搜尋 PID / 用戶 / COMMAND", "procSearchAria": "搜尋進程", "filterAll": "全部", "filterMine": "非系統", "selectedN": "選中 {{count}}", "showOf": "· 顯示 {{shown}}/{{total}}", "topLoading": "載入 top 摘要中…（/proc/stat 雙樣本）", "topAria": "top 摘要", "perCore": "每核", "noPerCore": "無每核資料", "uptimeDays": "{{d}} 日，{{h}}:{{m}}", "used": "已用", "free": "空閒", "signal": "訊號", "kill": "結束", "send": "送出", "procDetail": "進程詳情", "refreshProc": "重新整理進程", "noProcs": "沒有進程", "noProcsFilter": "沒有符合篩選的進程", "mounts": "掛載點", "fs": "檔案系統", "mount": "掛載", "size": "容量", "usage": "用量", "project": "專案", "quota": "配額", "ratio": "佔比", "unlimited": "無限制", "noProjects": "尚無專案", "noProjectsDesc": "建立專案後可在此看真實 主目錄 用量", "usageNote": "用量來自本機 du（非估算）。配額為控制面 soft limit；硬 setquota 需「套用限制到系統」。", "thresholdAlerts": "閾值告警", "alertsBuiltinOnly": "只有內建 CPU／記憶體／磁碟閾值。沒有電郵、webhook 或 Slack 渠道。", "lastEvaluated": "上次檢查", "alertsOkTitle": "目前正常", "alertsOkDesc": "沒有記憶體／負載／磁碟閾值告警。", "cpu": "中央處理器", "command": "指令", "user": "用戶", "clearSelection": "清除選取", "batchSignal": "批量訊號", "liveHint": "即時進程列表（SSE 或輪詢）。訊號需 管理員權限與系統變更權限。", "signalTo": "訊號 {{sig}} → PID {{pid}}", "procAlive": "進程仍在（kill -0 成功）", "procGone": "進程已結束", "procTable": "進程 ({{count}}{{more}})", "procTableDesc": "ps 列表 · 勾選後可 TERM/KILL（需 系統變更權限）", "selectAllAria": "全選篩選結果", "selectPidAria": "選取 PID {{pid}}", "controlPlane": "控制面", "controlPlaneNoSignal": "不可對控制面進程送出訊號", "protectedPid": "面板不可向 PID 1／init／systemd 發送訊號", "sigTermTitle": "發送 SIGTERM（請進程自行結束）", "sigKillTitle": "發送 SIGKILL（強制結束，無法攔截）", "batchTerm": "TERM", "batchKill": "殺", "rawTopLabel": "原始 top（未翻譯）", "followSseLabel": "跟隨（即時串流）", "alertsReadOnly": "只有內建 CPU／記憶體／磁碟閾值。沒有電郵、webhook 或 Slack 渠道。", "alertsGoNotifications": "前往通知中心", "lastCheck": "上次檢查", "rawTopHint": "未翻譯的 top(1) 輸出", "detailShort": "詳", "procUnavailable": "無法取得進程", "noProcData": "尚無進程資料", "noProcFilter": "無符合篩選的進程", "clickOnceOrFollow": "按「單次查詢」或開跟隨", "liveFootnote": "等同 遠端登入 top：/proc/stat 雙樣本算 %Cpu（開「每核」= top 按 1）、Mem/Swap、Tasks；進程表來自 ps。不是互動 PTY。Kill 需 系統變更權限；PID 1 與控制面預設保護。", "forceKillTitle": "強制結束 PID {{pid}}（SIGKILL）", "sendSigTitle": "向 PID {{pid}} 發送 SIG{{sig}}", "forceKillDesc": "無法攔截，可能丟數據。指令：{{cmd}}", "termDesc": "進程可自行清理後退出。指令：{{cmd}}", "forceKillBtn": "強制 KILL", "sendTermBtn": "發送 TERM", "procPidTitle": "進程 PID {{pid}}", "readingProc": "讀取 /proc…", "applyRenice": "套用 renice", "reniceHint": "-20 最高優先 · 19 最低（需 執行）", "noData": "無資料", "shareOfMeasured": "佔已量度 {{pct}}%", "mountsTitle": "磁碟 mounts ({{count}})", "mountsDesc": "真實磁碟用量（已過濾暫存檔系統）", "noMounts": "無 mount 列表", "noMountsDesc": "df 不可用或被過濾。主磁碟仍見於概覽。", "seeProjectUsage": "專案主目錄用量見「專案用量」分頁（真實 du · 共 {{size}}）", "measuringDu": "量測專案 主目錄（du）…", "projectUsageTitle": "專案磁碟用量 ({{count}})", "projectUsageDesc": "真實 du · 合計 {{total}} · {{at}}", "projectUsageDescEmpty": "對各專案 home_dir 執行 du", "remeasure": "重新量測", "usageNoteFull": "用量來自本機 du（非估算）。配額為控制面 soft limit；硬 setquota 需「套用限制到系統」。", "sseNeedLogin": "未登入，無法開啟 SSE", "sseSessionExpired": "未登入或 工作階段 失效，無法開啟 SSE", "sseHttpError": "串流 HTTP {{status}}", "colFilesystem": "檔案系統", "colMount": "掛載點", "colSize": "容量", "colUsed": "已用", "colAvail": "可用", "colUsePct": "使用率", "colHome": "主目錄", "usageNoteLink": "配額是控制面軟上限。要套用硬限制請到專案「隔離」分頁。", "shareNoQuotaHint": "未設配額，故無佔比。請到專案「隔離」分頁設定配額。", "setQuotaLink": "設定配額", "unusualHome": "非標準路徑", "unusualHomeHint": "不是 /home/… 專案主目錄。標準隔離路徑為 /home/ysk-server-{id}。" }, "migrate": { "tabInventory": "盤點", "tabTarget": "目標", "tabRun": "執行", "tabDone": "完成", "refreshFailed": "重新整理失敗", "migrateIncomplete": "遷移未完成", "requestFailed": "遷移請求失敗", "title": "整機遷移", "subtitle": "來源控制面 → 新機全量複製。完成後只改公網 IP／DNS，帳號、路徑與專案保持一致。", "inventorying": "盤點中", "inventoried": "已盤點", "inventoriedWarn": "已盤點 · {{n}} 警告", "inventoriedOrphans": "已盤點 · {{n}} 個孤立主目錄", "inventoriedWarnAndOrphans": "已盤點 · {{w}} 則警告 · {{n}} 個孤立主目錄", "inventoryFailed": "盤點失敗", "pendingInventory": "待盤點", "projects": "專案", "mailboxes": "信箱", "users": "用戶", "software": "軟件", "jobs": "工作", "notFound": "找不到", "wizard": "遷移精靈", "jobLog": "工作紀錄", "about": "說明", "steps": "遷移步驟", "sourceInventory": "來源盤點", "sourceInventoryDesc": "唯讀掃描控制面與專案路徑，不會修改系統", "inventoryRunning": "正在盤點本機…", "host": "主機", "projectHome": "專案 / 主目錄", "needSoftware": "需安裝軟件", "noInventory": "尚未取得盤點", "noInventoryHint": "按右上角「重新整理」掃描本機狀態與工作紀錄。介面 需已載入 migrate 路由。", "targetHost": "目標主機", "targetHostDesc": "僅需要管理員權限 遠端登入；密碼只用於本次請求，不會寫入資料庫", "sshTarget": "遠端登入 目標", "sshPort": "遠端登入 埠", "targetDataDir": "目標 dataDir", "authMethod": "認證方式", "rootPassword": "管理員 密碼", "notPersisted": "不會持久化", "passwordNotStored": "密碼只用於今次 SSH，不會寫入磁碟。", "overwriteDanger": "覆寫會取代目標機現有 YSK 資料，面板無法復原。", "outboundIdentity": "vault 內 外連 identity", "dryRun": "執行預檢（預覽試行）", "startMigrate": "開始整機遷移", "needSshTarget": "請填寫 遠端登入 目標", "needMaintWindow": "請勾選維護窗", "needRootPassword": "請輸入 管理員 密碼", "needRequired": "請完成必要欄位", "result": "遷移結果", "blocked": "已阻擋", "failed": "失敗", "detail": "詳細說明", "jobsTitle": "遷移工作（{{count}})", "jobsDesc": "狀態落在 dataDir/migrate/；密碼從不寫入入 job 檔。按右上角「重新整理」更新。", "phase": "階段", "jobPhase": "工作 {{id}} · {{phase}}", "phaseName": { "failed": "失敗", "done": "完成", "running": "進行中", "queued": "排隊中", "cancelled": "已取消" }, "target": "目標", "updated": "更新", "notes": "備註", "noJobs": "尚無遷移工作", "noJobsHint": "在「遷移精靈」完成一次 預覽試行 或正式遷移後會出現在此。", "confirmTitle": "確認整機遷移", "confirmDesc": "即將對 {{target}} 執行全量 同步複製 與目標 初始化。來源進入維護窗，過程可能數十分鐘。密碼僅本次使用。", "confirmStart": "確認開始", "cancel": "取消", "success": "成功", "unfilledTarget": "（未填目標）", "restartApiHint": "若剛部署新版本，請重啟 介面（", "afterRestart": "）後再按「重新整理」。", "inventoryWarnings": "盤點警告（{{count}}）", "orphanHomesHint": "孤立專案主目錄（store 無對應）。確認無用途後先刪。", "orphanHomesTitle": "孤立專案主目錄（{{count}}）", "orphanHomesSummary": "磁碟上有 {{count}} 條路徑不在 store。不確定請先備份，確認無用後再刪。", "orphanColHome": "主目錄", "orphanColModified": "最後修改", "orphanColEntries": "目錄項", "orphanEntries": "目錄內有 {{n}} 個頂層項目", "orphanKpi": "孤立主目錄", "sourceOs": "作業系統", "sourceDataDir": "dataDir", "sourceDbRedis": "資料庫 / Redis", "sourceDbRedisValue": "{{db}} 個資料庫 · {{redis}} 個 Redis", "orphanRemove": "刪除", "orphanRemoveTitle": "刪除此孤立專案主目錄？", "orphanRemoveDesc": "將永久刪除磁碟上的 {{path}}。這不是 store 內專案。需超級用戶與系統變更權限。", "orphanRemovePhrase": "請輸入 DELETE 確認。", "orphanRemoveNeedConfirm": "需確認", "orphanBackupFirst": "請先到備份頁備份", "orphanMtime": "最後修改 {{at}}", "expandAllWarnings": "展開全部 {{n}} 則警告", "collapseWarnings": "收合", "moreWarnings": "…另有 {{n}} 則", "authPassword": "管理員 密碼（安裝臨時金鑰後改用 金鑰）", "authIdentity": "遠端登入 身份庫 identityId", "authAgent": "本機預設 代理 / 金鑰", "confirmMaint": "確認維護窗", "confirmMaintDesc": "· 來源將短暫停服以保證 匯出 一致（正式遷移必勾）", "allowOverwrite": "允許覆寫目標既有 YSK 資料", "allowOverwriteDesc": "· 目標已有 ysk.json 時需勾選", "dryRunOnly": "僅 預覽試行", "dryRunOnlyDesc": "· 只做盤點 + 預檢，不 同步複製、不寫入目標", "executeNote": "本機需 系統變更權限已開啟 且以 管理員 執行 介面。遷移完成後請改 DNS A/AAAA，並檢查雲防火牆與郵件 PTR。", "dnsCutover": "DNS cutover（需人工）", "dnsCutoverDesc": "將下列主機名的 A / AAAA 指到新機公網 IP；並確認 80/443/25/587 等防火牆與郵件 rDNS。" }, "multiCheck": { "customPlaceholder": "自訂代碼", "searchPlaceholder": "搜尋…", "emptyText": "無符合項目", "removeTitle": "點選移除", "noneSelected": "尚未選擇", "optionsAria": "選項", "showingCapped": "顯示前 {{shown}}／共 {{total}} 項 — 用搜尋收窄", "add": "加入", "bulkAria": "批量選擇", "selectAll": "全選", "selectAllTitle": "全選全部 {{n}} 項", "selectFiltered": "全選篩選（{{n}}）", "selectFilteredTitle": "全選目前搜尋結果 {{n}} 項", "clearAll": "全不選", "clearFiltered": "清除篩選", "selectedCount": "已選 {{n}}／{{total}}", "chipsCollapsed": "已選 {{n}} 項 — 展開", "chipsCollapse": "收起" }, "nav": { "dashboard": "儀表板", "ai": "AI 任務", "projects": "專案", "security": "帳號安全", "email": "郵件", "files": "檔案", "system": "系統套用", "updates": "更新", "agents": "AI 代理（實驗）", "login": "登入", "logout": "登出", "publicFiles": "公用檔案", "ftp": "FTPS", "ftpService": "FTPS", "mysql": "MySQL", "mysqlService": "MySQL 服務", "mariadb": "MariaDB", "mariadbService": "MariaDB 服務", "postgres": "PostgreSQL", "postgresService": "PostgreSQL 服務", "redis": "Redis", "redisService": "Redis 服務", "cluster": "叢集", "dns": "DNS", "ssl": "SSL 憑證", "nginx": "Nginx", "node": "Node.js", "php": "PHP", "python": "Python", "go": "Go", "rust": "Rust", "protection": "防護中心", "firewall": "防火牆", "fail2ban": "fail2ban", "users": "用戶與方案", "services": "服務狀態", "metrics": "主機指標", "network": "網絡介面", "logs": "日誌中心", "cron": "Cron", "backups": "備份", "migrate": "整機遷移", "systemd": "systemd", "readiness": "就緒探測", "systemIndex": "系統工具", "sections": { "overview": "總覽", "sites": "帳號與站點", "mail": "郵件", "files": "檔案與 FTP", "databases": "資料庫", "dnsSsl": "域名與 SSL", "runtimes": "執行環境", "security": "安全", "system": "系統", "ai": "人工智慧", "validators": "驗證者節點", "containers": "容器" }, "java": "Java", "kotlin": "Kotlin", "bun": "Bun", "software": "軟件中心", "terminal": "終端機", "hostBrowse": "主機瀏覽", "cdn": "CDN", "vpn": "VPN", "vnc": "VNC", "apache": "Apache", "bookmarkedProjects": "已釘選專案", "bookmarkedEmailDomains": "已釘選域名", "bookmark": "釘到側欄", "unbookmark": "取消側欄釘選", "bookmarkPinned": "已釘選", "bookmarkAdded": "已釘到側欄", "bookmarkRemoved": "已從側欄移除", "btTracker": "BT Tracker", "support": "支持", "noAccessTitle": "沒有權限", "noAccessDesc": "你的角色不能開啟此頁。如需使用，請向管理員申請。", "backToDashboard": "返回儀表板", "validators": "驗證者節點 (Beta)", "docker": "Docker" }, "network": { "title": "網絡介面", "canMutate": "可變更", "readOnlyBlocked": "唯讀／受阻", "statIfaces": "介面", "statUp": "已啟用", "oper": { "up": "已啟用", "down": "已停用", "unknown": "未知", "loopback": "永久啟用", "loopbackHint": "回環介面一律可用，不可變更。", "other": "其他" }, "statGateway": "閘道", "pageActions": "頁面操作", "loadingSnap": "讀取網絡快照…", "mutateHint": "變更即時生效，重開可能還原。", "cannotMutate": "無法變更：需 EXECUTE 與 root。", "tabs": { "ifaces": "介面", "routes": "路由", "dns": "域名系統", "advanced": "進階", "about": "說明", "realip": "真實 IP / CDN" }, "ifaceSummary": "{{count}} 個介面 · {{up}} 個 UP", "noIfaces": "沒有介面", "noIfacesDesc": "ip 不可用或無權讀取", "colName": "名稱", "colStatus": "狀態", "ifaceOps": "{{name}} 操作", "routeTable": "路由表", "defaultGw": "預設閘道 {{gw}}", "liveIpRoute": "即時 ip route", "noRoutes": "沒有路由", "colDest": "目的地", "addRoute": "新增路由", "persistNm": "保存到 NetworkManager 連線（重開仍在）", "ephemeralRoute": "僅即時 ip route（重開可能消失）", "destPlaceholder": "預設 或 10.0.0.0/8", "devOptional": "Dev（可選）", "defaultDev": "預設出口：{{dev}}", "saveNm": "保存（NetworkManager，重開不消失）", "ephemeralHint": "取消則只做即時 ip route add", "nmUnavailable": "NetworkManager 未運行 — 只能加入即時路由", "defaultRouteDownNeedName": "此介面是預設路由出口。請輸入介面名稱確認 — 可能會斷開面板連線。", "saveRoute": "保存路由", "dnsSettings": "DNS 設定", "dnsNmHint": "經 NetworkManager 寫入連線「{{conn}}」並重連（持久）", "dnsCannotApply": "目前無法套用：需 NetworkManager 作用中連線 + 執行 與管理員權限", "mode": "模式", "connection": "連線", "source": "來源", "ignoreAutoDns": "現況 ignore-auto-dns", "ignoreYes": "yes（忽略 DHCP DNS）", "ignoreNo": "no（跟 DHCP）", "nameserverEditHint": "可加減伺服器；套用寫入 NetworkManager 並重連", "routerDns": "路由器 {{dns}}", "current": "目前", "serverList": "伺服器列表", "emptyDnsTitle": "尚未加入 DNS", "emptyDnsDesc": "按「加伺服器」開始", "keepOneRow": "至少保留一列（可清空後再刪）", "removeServer": "移除此伺服器", "searchDomainsPlaceholder": "可選，空白分隔", "ignoreDhcpDns": "忽略 DHCP 自動 DNS（ipv4.ignore-auto-dns=yes）", "restoreDhcpHint": "用「還原 DHCP DNS」可交回路由器分配", "noNmConnection": "無可用 NM 連線 — 不會盲改 /etc/resolv.conf（避免假成功）。", "needExecuteRoot": "需 系統變更權限已開啟 與管理員權限 才會真寫入。", "resolveTest": "解析測試", "resolveTestDesc": "getent ahosts（本機實際解析結果）", "hostname": "主機名", "testFailed": "測試失敗", "stackDetect": "本機網絡堆疊偵測", "available": "可用", "unavailable": "不可用", "persistNmCap": "可持久化（NM）", "ifaceDetail": "介面 {{name}}", "type": "類型", "addresses": "位址", "noAddresses": "無地址", "ifaceAdjust": "介面調整", "addIpTitle": "加 IP · {{name}}", "saveIp": "保存 IP", "add": "新增", "cidrPlaceholder": "例：10.0.0.5/24 或 2001:db8::5/64", "saveIpHint": "寫入連線 +ipv4/ipv6.addresses 並 connection up", "confirmIfaceName": "輸入介面名「{{name}}」確認", "deleteRouteTitle": "刪除路由？", "deleteRouteNamed": "刪除路由 {{dst}}？", "deleteRouteBody": "將從即時路由表移除 {{dst}}{{via}}{{dev}}。", "viaGw": " 經 {{gw}}", "onDev": " 裝置 {{dev}}", "deleteDefaultWarn": "— 刪除 預設 可能斷線。", "alsoRemoveNm": "同時從 NetworkManager 連線移除（重開不再出現）", "loadFailed": "載入失敗", "loadNetworkFailed": "載入網絡失敗", "on": "開", "off": "關", "addServer": "加伺服器", "applyDns": "套用 DNS", "restoreDhcpDns": "還原 DHCP DNS", "test": "測試", "refresh": "重新整理", "hostSettings": "主機設定", "protection": "防護中心", "defaultEgressBadge": "預設", "opsAria": "{{name}} 操作", "details": "詳情", "addIp": "加 IP", "reset": "重設", "ephemeralOnly": "僅即時", "saveRouteHint": "保存會寫入 NM 連線並 connection up；預設 用 ipv4.gateway，其他用 +ipv4.routes。需 執行 與管理員權限。", "deleteShort": "刪", "resetForm": "重設表單", "applyDnsNotes": "套用後會 nmcli connection modify + up；短暫斷線屬正常。stub 127.0.0.53 不會寫入（本機 resolved 內部用）。", "testResolve": "測試解析", "loadRaw": "載入 raw 輸出", "hideRaw": "隱藏 raw 輸出", "rawLoadedAt": "載入時間 {{time}}", "confirmDown": "確認離線", "linkDownTitle": "將 {{name}} 離線", "linkDownNeedConfirm": "需輸入介面名稱確認", "defaultRouteDownWarn": "此介面是預設路由出口，離線後可能無法連上管理面板。", "deleteDefaultMayDrop": "— 刪除 預設 可能斷線。", "gateway": "閘道", "nameservers": "名稱伺服器", "searchDomains": "搜尋網域", "backend": "後端", "cidr": "CIDR", "realip": { "title": "CDN / 真實用戶 IP", "desc": "還原 CDN 後方訪客 IP；只信任邊緣 CIDR。", "provider": "預設供應商", "providerHint": "直連選 none；在 CDN 後選供應商。", "mode": "信任模式", "modeSingle": "單一供應商標頭（建議）", "modeXff": "X-Forwarded-For + 合併 CDN CIDR", "customCidrs": "額外信任 CIDR", "customCidrsHint": "每行一個 CIDR。", "lastRefresh": "上次 CIDR 更新", "active": "目前預設", "republishHint": "儲存後請重新發布專案 Nginx。", "refresh": "更新 CDN IP 列表", "refreshOk": "已更新 CIDR 列表", "providers": { "none": "無（直連源站）", "cloudflare": "Cloudflare", "fastly": "Fastly", "bunny": "兔子CDN", "cloudfront": "AWS 雲端前", "azure_frontdoor": "蔚藍前門", "gcore": "國核CDN", "custom": "自訂代理" }, "needProvider": "請先選擇 CDN 供應商，先可更新 IP 列表。", "spoofWarn": "信任錯誤的 CIDR 會讓客戶端偽造 X-Forwarded-For／CDN 標頭，假裝成真實來源 IP。" }, "linkUp": "上線", "linkDown": "離線", "linkDownDefault": "下線預設路由", "loopbackImmutable": "回環介面不可變更", "operUnknownHint": "核心未回報 UP／DOWN（lo 常見）。介面仍可用。", "persistNmHint": "可持久化代表經 NetworkManager 寫入後，重啟後設定仍然有效。", "deleteDefaultPanelWarn": "刪除預設路由可能令面板連線中斷。請輸入 DEFAULT 確認。", "deleteDefaultNeedConfirm": "需確認 — 請輸入 DEFAULT（可能中斷本面板）", "deleteRouteNeedConfirm": "需確認", "typeDefaultToConfirm": "輸入 DEFAULT 確認" }, "nginx": { "pillSites": "{{count}} 站點", "statSites": "站點", "statSslFlag": "SSL 標記", "purgeOk": "已 清除", "projectSitesHint": "專案站點（受管 conf）同獨立站點分開列出。改專案 Nginx 請到專案 → 網絡。", "purgeCache": "清除 Cache + 重新載入", "purgeCacheTitle": "清除 Nginx cache 並重新載入？", "purgeCacheDesc": "清除磁碟 cache 並重載 Nginx。線上站點不會中斷。", "notInstalled": "Nginx 尚未安裝", "listTitle": "站點（{{count}}）", "listDesc": "建立後請再按「套用」同步到系統", "createSite": "+ 建立站點", "colServerName": "伺服器名稱", "colKind": "類型", "kindProxy": "反向代理", "kindStatic": "靜態", "kindPhp": "PHP-FPM", "colTarget": "上游／根目錄", "colStatus": "狀態", "emptyTitle": "未有站點", "emptyDesc": "用列表右上角「建立站點」新增；建立後請再按「套用」", "applyTitle": "寫入管理檔並嘗試同步到系統 + nginx -t + 重新載入", "applyToSystem": "同步到系統", "createTitle": "建立 Nginx 站點", "createDesc": "建立後需套用", "editTitle": "編輯 Nginx 站點", "editDesc": "儲存後需套用", "deleteTitle": "刪除站點？", "deleteTitleNamed": "刪除站點 {{name}}？", "deleteDescNamed": "從面板移除 {{name}}。已套用到系統的站會一併刪受管 conf。", "invalidServerName": "請填寫有效主機名稱（例如 app.example.com）。", "needUpstream": "反向代理必須填寫上游。", "needRoot": "靜態與 PHP 站必須填寫網站根目錄。", "deleteDesc": "確定刪除此站點？", "serverNameHint": "server_name，例如 app.example.com", "kindLabel": "站點類型", "upstreamLabel": "上游位址", "upstreamHint": "例如 127.0.0.1:3000 或 http://backend:8080", "rootLabel": "網站根目錄", "rootHintPhp": "PHP 專案 document 管理員，例如 /var/www/app/public", "rootHintStatic": "靜態檔案目錄絕對路徑", "sslLabel": "啟用 SSL 區塊", "sslDesc": "產生 listen 443 ssl；憑證需於 SSL 頁就緒後綁定", "saveThenApply": "儲存後按「套用」寫入 nginx", "statProjectSites": "專案", "projectListTitle": "專案站點（{{count}}）", "projectListDesc": "由專案 publish／goLive 寫入的受管 conf；修改請到專案「網絡」。", "colProject": "專案", "colRuntime": "執行環境", "colConf": "設定檔", "confWritten": "已寫入", "confMissing": "無路徑", "projectEmptyTitle": "尚未有專案 Nginx", "projectEmptyDesc": "部署後到專案「網絡」發佈 Nginx", "preview": "預覽", "openProject": "開啟專案", "projectPager": "專案站點分頁", "prevPage": "上一頁", "nextPage": "下一頁", "pageOf": "第 {{page}} / {{total}} 頁 · 共 {{count}}", "projectConfEmpty": "（設定檔空白）", "projectConfReadFail": "讀取專案 conf 失敗", "projectPreviewPath": "{{小路}}", "pageDesc": "Nginx 站點", "filterSource": "來源", "sourceAll": "全部", "sourceProject": "專案", "sourceStandalone": "獨立", "colSource": "來源", "filterProject": "已按專案篩選", "globalSettings": "全域設定", "siteSettings": "站點設定", "saveApply": "儲存並套用", "settingsSaved": "已儲存", "setGzip": "Gzip 壓縮", "setShowVersion": "顯示版本號", "setShowVersionDesc": "勾選 = server_tokens on（回應標頭顯示 nginx 版本）", "setHttp2": "HTTP/2（SSL）", "setBody": "Body 上限", "setKeepalive": "保活", "setAccessLog": "訪問日誌", "logOn": "開", "logBuffered": "緩衝", "logOff": "關", "setForceHttps": "強制 HTTPS", "setHsts": "HSTS", "setCfRealIp": "Cloudflare 真實 IP", "setIndexes": "目錄列表", "bodyInherit": "跟隨全域", "stopSites": "將有 {{n}} 個站點停止回應 HTTP。" }, "notFound": { "title": "找不到頁面", "body": "沒有 {{path}} 這個面板頁。", "hint": "不明網址不會再默默轉去儀表板。", "home": "儀表板" }, "notes": { "agents": { "sessionNotFound": "找不到 工作階段：{{sessionId}}" }, "notFound": "找不到", "needPath": "請指定路徑", "needName": "請填寫名稱", "needHost": "請填寫主機", "needDomain": "請填寫域名", "needProjectName": "請填寫專案名稱", "needServerIp": "請指定伺服器 IP", "passwordMin8": "密碼至少 8 字元", "invalidPath": "無效路徑", "invalidIp": "無效 IP", "invalidIp46": "無效 IPv4／IPv6", "invalidPackageName": "套件名稱無效", "fileMissing": "檔案不存在", "notRegularFile": "不是一般檔案", "readFailed": "讀取失敗", "pathResolveFailed": "路徑解析失敗", "fieldInvalid": "欄位 {{field}} 無效：{{value}}", "apt": { "updateIndex": "更新套件索引" }, "state": { "closed": "已關閉", "active": "運作中" }, "cat": { "security": "安全", "mail": "郵件", "database": "資料庫", "runtime": "執行環境" }, "ssh": { "identityNotFound": "找不到 identity", "registrationNotFound": "找不到登記", "keyOkNologin": "金鑰已接受。帳戶為 nologin 或僅限 SFTP（無 SSH shell）。視為通過。", "keyOkSftp": "SSH shell 被拒後，SFTP pwd 成功。" }, "cdn": { "siteNotFound": "找不到 CDN 站點", "nodeMissing": "節點不存在", "loopbackOriginRemote": "來源是 127.0.0.1——那是本機，不是遠端 edge。請設可達的 origin IP 或 bind_ip。", "originRemoteRewrite": "遠端 edge 會用可達 origin {{url}}，而不是 loopback。", "originRemoteUnknown": "來源是 loopback，且未知道公網／內網 IP 或 bind_ip——在補上之前，套用會拒絕遠端 edge。", "needSshOrFleet": "遠端 edge 需要出站 SSH 身份（或用戶名），或 /agents 機群 session。單憑 Health URL 不能套用。", "probe": { "timeout": "連線逾時 {{ms}}ms（{{detail}}）。對端可能被防火牆擋住。", "dns": "DNS 查詢失敗（{{detail}}）。", "refused": "連線被拒 {{ms}}ms（{{detail}}）。埠未開或單向封鎖。", "tls": "TLS 驗證失敗（{{detail}}）。", "unreach": "主機不可達 {{ms}}ms（{{detail}}）。", "http": "HTTP 探活失敗 {{ms}}ms（{{detail}}）。" } }, "backup": { "testUnsaved": "正在測試未儲存的表單（尚未寫入設定）。", "testIdentity": "sftp（身份金鑰）連到 {{spec}} 成功", "sshAuthFailed": "SSH 金鑰或密碼被拒（publickey）。請選出站身份，或安裝 sshpass。", "remotePathIsFile": "遠端路徑 {{path}} 是檔案。請用目錄。", "remoteMkdirFailed": "無法建立遠端目錄：{{detail}}", "sidecarPushed": "已一併推送 SQL sidecar {{name}}", "fileNotFound": "找不到備份檔", "resticNoPassword": "Restic 已啟用但未設定 密碼", "resticNotInPath": "Restic 不在 PATH", "dbEnvUnreadable": "無法讀取 .db.env，略過 SQL 傾印。", "dbEnvNoName": ".db.env 沒有資料庫名稱，略過 SQL 傾印。", "targetOutside": "還原目標必須在專案家目錄或公開檔案根目錄之內。", "controlPlaneDryRun": "僅預覽——未寫入任何檔。在面板按還原並確認短語才會寫入。", "controlPlaneNeedConfirm": "完整還原控制平面需要確認短語 RESTORE-CONTROL-PLANE。", "controlPlaneRestartAfter": "還原成功後請重啟 API。", "movedToTrash": "已將 {{name}} 移至回收區。{{days}} 日後永久刪除。", "restoreNameExists": "無法還原 {{name}} — 已有同名備份檔。", "restoredFromTrash": "已從回收區還原 {{name}}。", "trashEmptied": "已從回收區永久刪除 {{n}} 個備份檔。", "partialOk": "部分成功 — 略過 {{n}} 個專案" }, "health": { "portListening": "埠 {{port}} 正在監聽", "portNotListening": "埠 {{port}} 未在監聽", "httpOk": "HTTP 正常 {{status}}", "httpFail": "HTTP 失敗：{{detail}}" }, "redis": { "cliMissing": "未安裝 redis-cli", "requirepassAlreadySet": "Redis 已有 requirepass — 未覆寫。", "requirepassApplied": "已在執行中套用 requirepass", "requirepassApplyFailed": "無法 CONFIG SET requirepass（將靠重啟與設定檔）", "generatedRequirepass": "已產生 Redis 密碼（只顯示一次）：{{password}}" }, "nginx": { "reloaded": "nginx 已 reload", "configOk": "Nginx 設定檢查通過", "reloadExit": "Nginx 重新載入 結束碼={{code}}", "managedDir": "管理設定目錄：{{path}}", "includeHint": "於 Nginx 加入：include {{path}}/*.conf;", "removedOrphan": "已刪除幽靈 Nginx conf {{path}}", "keptLiveSsl": "保留 {{path}} 的 HTTPS 區塊（受管範本沒有 listen 443）", "orphanCleanupFailed": "清理幽靈 Nginx conf 失敗：{{detail}}", "settingsWritten": "已寫入 Nginx 全域 snippet", "settingsNeedExecute": "套用需 YSK_EXECUTE", "reloadFailed": "nginx reload 失敗" }, "ssl": { "requestCert": "申請憑證" }, "ftp": { "startVsftpd": "啟動 vsftpd", "writeVsftpd": "寫入 vsftpd 設定", "vsftpdStarted": "vsftpd 已啟動", "openPortsStep": "防火牆埠（需手動）", "openPortsReminder": "請在主機防火牆同雲安全組放行 TCP：{{ports}}。套用 FTPS 不會代你開埠。", "openPortsPasvHint": "若登入成功但列目錄 LIST 逾時，多半是 PASV 資料埠被擋——要開齊 PASV 範圍，不是僅開啟 21。", "publicPlaintextBlocked": "拒絕在未啟用 FTPS 時對外啟動 FTP。請改為僅本機監聽、選憑證啟用 FTPS，或輸入 PLAINTEXT 確認後才公開明文服務。" }, "deploy": { "nodeMissingIsolated": "隔離部署找不到 Node：{{path}} — 請先裝 Node {{version}} toolchain 再部署。拒絕寫入會 203/EXEC 的 unit。", "nodeMissing": "找不到 Node：{{path}} — 請裝 toolchain（Node {{version}}）再部署", "nodeRejectedPath": "project user 不能執行此 Node 路徑：{{path}} — 應使用 {{planned}}", "unitUnhealthy": "systemd unit 不健康（{{detail}}）。journalctl -u {{unit}} — 203/EXEC 多半是 binary 對 project user 無權限", "skippedPanelNode": "已跳過 panel Node {{path}}（project user 執行不到，會導致 systemd 203/EXEC）", "usingFallback": "Node binary：使用 {{path}}（計劃路徑 {{planned}} 不存在）", "usingPanelExec": "Node binary：回退 panel execPath {{path}}", "usingPanelDegraded": "Node binary：degraded 部署使用 panel {{path}}（不適用於 systemd User=ysks_*）", "nodeNotFoundPlanned": "主機未找到 Node {{version}} — unit 會用 {{planned}}；請裝 toolchain 再部署" }, "files": { "needSrcDst": "請指定來源與目標路徑", "pathOutsideSandbox": "路徑超出沙箱範圍：{{target}}", "notFoundRel": "找不到：{{relPath}}", "fileNotFoundRel": "找不到檔案：{{relPath}}", "notFoundFrom": "找不到：{{fromPath}}", "alreadyExists": "已有同名項目：{{name}}" }, "dns": { "needZoneServerIp": "請填寫 zone 與 伺服器 IP", "noClusterPeer": "尚未登記叢集 對等節點", "planOnly": "僅計劃 — 需 apply=true（root + YSK_EXECUTE）寫入 /etc/powerdns 並 rediscover", "needRootNamed": "需要 root + EXECUTE 先可更新 named.conf 並 rediscover", "noManagedZonesClear": "dataDir/dns/zones 無區域檔 — 將清空 PowerDNS YSK include", "bindRegistered": "PowerDNS BIND：已註冊 {{count}} 個 zone（list-zones 已確認）", "listZonesIncomplete": "named.conf 已更新但 list-zones 未確認全部 zone — 不標 loaded", "noLaunchDefaultBind": "找不到 launch= — 預設走 bind 路徑", "writeNotAnswerDig": "只寫 zone 檔不會答 dig — 要載入 PowerDNS（named.conf + rediscover）", "bindDigFailed": "zone 已列出但 dig SOA 失敗 — 不標 loaded", "bindLoadedOk": "Zone {{zone}} 已掛入 PowerDNS BIND 且 dig OK", "bindSyncFailed": "BIND named.conf 同步失敗或 dig 無答", "bindSkipPdnsutil": "略過 BIND 路徑（後端偏好 pdnsutil）", "pdnsCtlNoConfirm": "有 pdns_control 但 zone 未確認；檢查 named.conf 或用 pdnsutil 後端", "usingExistingZone": "使用現有 zone 檔：{{path}}", "healNeedRoot": "需要 root + EXECUTE 先可改寫 pdns local-address", "pdnsUnitActive": "pdns 單元：active", "pdnsUnitInactive": "pdns 單元：非 active", "udp53Listening": "UDP/53：監聽中", "udp53NotListening": "UDP/53：仍未監聽", "healResyncOk": "已修復 listener 並重新同步 zone 入 PowerDNS BIND", "healResyncPartial": "listener 已修好但 zone 同步未完 — 請撳「寫入並載入區域」", "installAfterLoad": "安裝後請 apply DNS zones（寫 named.conf + rediscover）或 POST powerdns/load", "bindFileNotEnough": "BIND 後端：只寫 zone 檔不足，要 named.conf include 先會答 dig", "zeroDomainsHint": "PowerDNS list-zones: 0 — 碟上有 zone 檔但未載入", "localAFailed": "本機 A 探測失敗（www/ftp/@）zone={{zone}}", "publicNsCloudflare": "公網 NS 是第三方 DNS/CDN（例如 Cloudflare）— 公網 dig 不會用本機 zone", "publicNsOther": "公網 NS 不是本機 — 全世界 check 會忽略本機 PowerDNS，直至改註冊商 NS", "publicNsHere": "公網 NS 似 in-zone（ns1/ns2.zone）— 外網可能問你", "firewall53Hint": "ss 見不到 UDP/53 — 若外網 dig 失敗請開防火牆 53 both（TCP+UDP）", "applyDigOk": "PowerDNS BIND：list-zones + dig OK", "applyDigFail": "conf 已註冊但 dig 仍空/REFUSED — 不標 applied", "applySyncIncomplete": "PowerDNS bind 同步未完 — 只寫入碟。請檢查 EXECUTE/root 或 pdns 日誌", "writeOnlyHint": "只寫入 zone 檔 — 要 load/apply 掛 named.conf 先會答", "noActiveUnit": "沒有運行中的 named／bind9／pdns 單元", "pdnsUnitRestarts": "pdns 單元狀態／重啟次數：{{detail}}", "port53LoopbackOnly": "53 埠只綁在 loopback（systemd-resolved 127.0.0.53）— 不是產品權威 nameserver", "port53Closed": "53 埠未在聽（UDP／TCP）", "udp53NotPublic": "UDP/53 未綁公網位址", "tcp53NotPublic": "TCP/53 未綁公網位址", "noManagedZones": "dataDir/dns/zones 沒有管理中的 zone 檔", "pdnsListZones": "PowerDNS list-zones：{{n}}", "lookupIgnoredAt": "dig 不可用 — 已忽略 @{{server}}。不會把系統 resolver 當成該伺服器的答案。", "digNotInstalled": "dig 未安裝", "digEmpty": "dig 無答案", "localAOk": "本機 A {{name}} → {{ip}}" }, "db": { "needExecuteCreate": "伺服器未開啟系統變更權限，無法在管理面板建立資料庫", "dryRunMysql": "預覽試行：未建立資料庫。加 --執行 且 系統變更權限已開啟 先真正 provision", "remoteNoCreds": "未存帳號／密碼——只測 TCP（登記 ≠ 已登入）。", "remoteReachable": "TCP {{host}}:{{port}} 可達（{{ms}}ms）。", "remoteUnreachable": "TCP {{host}}:{{port}} 關閉或被過濾（{{ms}}ms）。" }, "net": { "invalidIface": "介面名稱無效", "invalidDev": "dev 名稱無效", "needNmActive": "無法持久化：需要 NetworkManager 作用中連線" }, "project": { "notFound": "找不到專案：{{id}}", "docRootMustBeRelative": "文件根必須為相對路徑（相對於專案家目錄），不可用絕對路徑。", "docRootInvalid": "文件根路徑無效（不可含 .. 或非法字元）。", "domainInvalid": "網域名稱格式無效：{{domain}}", "domainInUse": "網域 {{domain}} 已被專案「{{other}}」使用。" }, "email": { "domainNotFound": "找不到郵件域名：{{id}}", "wroteNginx": "已寫入 Nginx 設定：{{nginxPath}}", "wrotePath": "已寫入 {{path}}", "domainDeleted": "已刪除域名 {{domain}}（信箱 {{mailboxes}}、別名 {{aliases}}）", "domainDataDirRemoved": "已移除本機資料目錄 {{path}}", "domainDataDirRemoveFailed": "無法移除資料目錄 {{path}}：{{detail}}", "domainDeleteSystemHint": "控制面已刪除；系統 MTA 映射若仍存在請重新套用其餘域名或人手清理", "mailboxDeleted": "已刪除信箱 {{address}}", "mailboxNotFound": "找不到信箱", "mailboxDataRemoved": "已移除本機目錄 {{path}}", "domainDeleteConfirmMismatch": "確認字串與域名不符，已拒絕刪除", "domainDataKept": "已保留本機 dataDir 郵件資料（removeData=false）", "mailboxPasswordUpdated": "已更新 {{address}} 的密碼", "mailboxStatusUpdated": "已將 {{address}} 狀態設為 {{status}}", "mailboxUpdateEmpty": "沒有可更新項目 — 請提供密碼及／或狀態", "mailboxStatusInvalid": "無效的信箱狀態", "mailboxNoChanges": "沒有變更", "dovecotApplyNeedRoot": "套用 Dovecot 虛擬郵箱認證需要 root + YSK_EXECUTE", "dovecotNotInstalled": "本機未安裝 Dovecot", "dovecotNoPassdbSnippets": "dataDir/email 下找不到網域 passdb snippet", "dovecotApplyFailed": "套用 Dovecot 虛擬郵箱認證失敗：{{detail}}", "dovecotApplyOk": "已安裝 Dovecot 虛擬郵箱認證（{{conf}}，{{count}} 個網域）", "dovecotPassdbWrittenNeedApply": "已寫入 passwd-file（dataDir）— 需 EXECUTE+root 套用到 Dovecot 先可登入", "postqueueSetgidBroken": "Postfix 佇列工具失敗：main.cf 中 setgid_group 為空。應設為 postdrop（有 YSK_EXECUTE 時面板會嘗試自動修復）。", "postqueueMailDown": "Postfix 未運行（showq 不可用）。有 YSK_EXECUTE 時面板會嘗試啟動 — 請檢查軟件分頁或 systemctl status postfix。", "postqueueSpoolMissing": "Postfix 佇列目錄缺失（例如 hold/）。有 YSK_EXECUTE 時面板會嘗試建立 spool 並啟動 Postfix。", "invalidDomain": "請輸入有效郵件域名", "invalidServerIp": "請輸入有效伺服器 IP", "mailboxLocalPartInvalid": "郵箱本機部分只可用英文字母、數字與 . _ + -", "passwordTooShort": "密碼至少 8 個字元" }, "software": { "startUnit": "啟動 {{u}}", "installedSpec": "已安裝 {{title}}", "installPkg": "安裝 {{p}}", "npmGlobal": "npm install -g {{pkgs}}", "needNodeForNpm": "未找到 node／npm — 請先安裝 Node.js 再安裝 {{title}}", "uninstallNoTargets": "未選擇要解除安裝的軟件", "uninstallNothingInstalled": "所選範圍內沒有已安裝項目", "uninstallProtected": "已略過受保護元件：{{ids}}", "uninstallConfirmMismatch": "確認短語不相符", "uninstallOk": "已解除安裝 {{n}} 個元件", "uninstallPartial": "解除安裝完成但有錯誤 — 請查看步驟" }, "php": { "aptPackages": "將安裝 {{count}} 個套件：{{list}}" }, "runtime": { "plugins": "一併安裝工具：{{list}}", "pluginsOk": "選定工具已安裝", "pluginsFailed": "部分工具安裝失敗或跳過：{{list}}", "pluginsUninstall": "卸載工具：{{list}}", "pluginsUninstallOk": "選定工具已卸載", "pluginsUninstallFailed": "部分工具卸載失敗或跳過：{{list}}", "pluginsNoneToUninstall": "沒有可卸載的工具（可能已移除或屬必裝）" }, "approval": { "notFound": "找不到審批：{{id}}" }, "readiness": { "core": "控制面", "security": "安全", "binaries": "二進位／套件", "hosting": "託管", "dns": "域名系統", "email": "郵件", "isolation": "專案隔離", "ops": "維運", "runtimesNode": "Node.js", "runtimesPhp": "PHP", "runtimesPython": "Python", "runtimesGo": "Go", "pm2": "PM2", "runtimesNodeFix": "到 /runtimes/node 安裝 Node", "runtimesPhpFix": "到 /runtimes/php 安裝 PHP", "runtimesPythonFix": "到 /runtimes/python 安裝 Python", "runtimesGoFix": "到 /runtimes/go 安裝 Go", "pm2Fix": "到 Node 執行環境頁安裝 PM2" }, "needAdmin": "需要管理員權限", "notInstalled": "未安裝", "unknown": "未知", "failed": "失敗", "running": "運行中", "stopped": "已停止", "probe": "探測", "install": "安裝", "port": "埠", "git": { "missingBin": "系統 PATH 找不到 git", "auth": "驗證失敗。請加入 deploy key 或 HTTPS token。", "hostkey": "SSH host key 驗證失敗。請確認後釘選。", "dirty": "工作區有 {{count}} 項本機改動。已阻止 pull。", "diverged": "無法 fast-forward。若要丟棄本機 Git 歷史，請重設到遠端 ref。", "missingRef": "遠端沒有該分支、tag 或 commit。", "shallow": "此 clone 為淺層。要釘舊 commit 請先抓完整歷史。", "notRepo": "app/ 尚未是 Git repository。", "unrelated": "歷史無關。確認後才可重新 clone——自訂檔會消失。", "lock": "存在 Git index.lock。只在沒有 git 行程時才移除。", "disk": "磁碟已滿或超出配額。", "timeout": "Git 逾時。", "network": "連接遠端時網絡出錯。", "lfs": "此 repo 使用 Git LFS，但主機沒有 git-lfs。", "submodule": "Submodule 更新失敗。", "unknown": "Git 失敗。請查看指令輸出。", "fetchOk": "已從 origin fetch。", "checkoutOk": "已 checkout {{ref}}。", "resetOk": "已 hard reset 到 {{ref}}。", "envRestored": "已用控制面資料還原 app/.env。", "needPinHost": "尚未釘選 SSH host key。請先掃描並釘選，再 clone 或 fetch。", "tokenSaved": "已儲存 HTTPS token（不會再顯示）。", "tokenCleared": "已移除 HTTPS token。", "tokenInvalid": "Token 至少 8 個字元。", "deployKeyCreated": "已建立 deploy key。請把 public key 加到 Git 主機。", "deployKeyCleared": "已解除此專案的 deploy key。", "hostPinned": "已釘選 {{host}} 的 SSH host key。", "hostUnpinned": "已清除釘選的 SSH host key。", "hostScanFailed": "ssh-keyscan 沒有傳回該主機的 key。", "hookEnabled": "已開啟 inbound Git hook。請自行把 URL 貼到 GitHub、Gitea 或 GitLab。", "hookDisabled": "已關閉 inbound Git hook。該 URL 不會再同步。", "hookSecretOnce": "請立即複製此 hook secret。之後不會再顯示。", "refsNeedUrl": "請先填寫 Git 網址。", "refsOk": "已載入 {{branches}} 條分支、{{tags}} 個 tag。", "refsEmpty": "遠端沒有列出分支或 tag。", "diffEmpty": "沒有未暫存的 diff（已排除受保護的 .env）。" }, "auto": { "n0001": "狀態：已套用", "n0002": "找不到用戶", "n0003": "已封鎖: 需要 系統變更權限已開啟", "n0004": "找不到資源", "n0005": "無法套用系統：需 系統變更權限 與管理員權限", "n0006": "需要系統變更權限", "n0007": "狀態：已寫入", "n0008": "需要系統管理員（管理員）權限才能完成", "n0009": "建立帳戶資料庫", "n0010": "完成", "n0011": "找不到帳戶", "n0012": "狀態：失敗", "n0013": "未運行", "n0014": "啟動中", "n0015": "未安裝 mysql 客戶端", "n0016": "未安裝 psql", "n0017": "UFW 防火牆", "n0018": "執行環境", "n0019": "找不到 定時工作 工作", "n0020": "已匯入", "n0021": "以 管理員 執行", "n0022": "管理員雙重驗證", "n0023": "錯誤日誌路徑", "n0024": "找不到站點", "n0025": "系統變更未開啟", "n0026": "自動 封鎖 已熔斷", "n0027": "請指定 agentId", "n0028": "找不到專案", "n0029": "需要 名稱", "n0030": "緊急", "n0031": "自動 封鎖 未開啟", "n0032": "預覽試行：此計劃未改系統", "n0033": "預覽試行：未改系統", "n0034": "建議至少 1 個 從節點", "n0035": "無節點 探測 成功", "n0036": "伺服器未開啟系統變更權限，無法 同步複製", "n0037": "reapply 關鍵步驟失敗", "n0038": "無法 初始化：未開啟 系統變更權限", "n0039": "初始化 需要 系統變更權限已開啟", "n0040": "最大連線數", "n0041": "綁定位址", "n0042": "站點無域名", "n0043": "略過 draining", "n0044": "找不到 CDN 節點", "n0045": "每日（GitHub Releases latest）", "n0046": "執行 模式（仍需 系統變更權限 才能寫系統目錄）", "n0047": "預覽試行 預設：加 --執行 先同步到系統 nginx", "n0048": "需要管理員", "n0049": "projectId 與 名稱 必填", "n0050": "^.*帳號或密碼不正確.*$", "n0051": "^.*需要有效的雙重驗證碼.*$", "n0052": "echo \"pdnsutil 找不到\" >&2", "n0053": ": ''}（重開可能消失；要持久請用「保存」）", "n0054": "# rsa_cert_file= (尚未選擇有效憑證)", "n0055": "$_GET / $_POST / $_COOKIE 變數上限", "n0056": "--密碼 需值，或設 YSK_MIGRATE_SSH_PASSWORD", "n0057": "-1 關閉；0 全部記錄", "n0058": "/proc/meminfo 不可讀", "n0059": "/proc/stat 不可讀 — CPU% 無法計算", "n0060": "0 = 不限制；可設 256mb", "n0061": "0 = 使用全部 CPU", "n0062": "0（關閉）", "n0063": "1 分鐘 load 超過 CPU×2", "n0064": "1. 於面板建立 MySQL 資料庫", "n0065": "1=最安全；2=效能較佳", "n0066": "2. 下載 WordPress 到 app/public", "n0067": "3. 設定 wp-config.php", "n0068": "4. 部署 PHP + 發布 Nginx／SSL", "n0069": "A 記錄值必須是 IPv4", "n0070": "A 記錄必須是 IPv4", "n0071": "AAAA 記錄值必須是 IPv6", "n0072": "AAAA 記錄必須是 IPv6", "n0073": "AOF 持久化", "n0074": "Adminer 檔案不存在；請 下載:是", "n0075": "代理 無法在全域範圍執行高風險寫入", "n0076": "代理 運行時", "n0077": "允許清單 工具清單", "n0078": "Axum + Tokio；需 cargo 建置 下載 crates（需外網）", "n0079": "Axum 範本：cargo 建置 --release 需外網 crates.io", "n0080": "Binlog 保留（天）", "n0081": "Binlog 保留（秒）", "n0082": "Binlog 格式", "n0083": "初始化 第一個節點（僅一次）", "n0084": "Bot 掃描", "n0085": "命令列 啟用 OPcache", "n0086": "CONFIG SET databases 未成功（可能需重啟後生效）", "n0087": "CPU 配額須為 1–10000", "n0088": "Cloudflare UA 未成功", "n0089": "Cloudflare Under Attack 已請求", "n0090": "Cookie Secure（僅 HTTPS）", "n0091": "資料庫 index 必須為 0–15", "n0092": "資料庫 標記已隔離但 主目錄 目錄不存在", "n0093": "資料庫 標記已隔離但 識別碼 找不到用戶 — 請重新建立系統用戶", "n0094": "DB_PASSWORD 為空 — 請在資源頁建立 MySQL 後填入或設 WP_DB_* 環境變數", "n0095": "DDoS 啟發式", "n0096": "DKIM 公鑰", "n0097": "DMARC 政策", "n0098": "DNS 已寫入 ≠ 公網 resolver 立即生效（受 TTL／上游快取影響）", "n0099": "DS 在 registrar 發佈前，請勿宣稱已上線。", "n0100": "Django 骨架：部署時 pip 安裝 django/gunicorn", "n0101": "Down 需 confirmName 等於介面名", "n0102": "EmailService 無 dataDir — 只寫資料庫（需 dataDir 才建 Maildir）", "n0103": "FPM 重載失敗", "n0104": "FTPS 需要域名", "n0105": "FastAPI + uvicorn；requirements.txt；/ 與 /health", "n0106": "Flask 最小 app.py；requirements.txt；/ 與 /health", "n0107": "GTID 模式：兩邊 設定檔 已開 gtid_mode=ON", "n0108": "Galera 僅支援 mariadb 引擎", "n0109": "Git URL 無效", "n0110": "GitHub 套件.json 缺少 version", "n0111": "GitHub release 缺少 標籤", "n0112": "Go 執行", "n0113": "Go 多版本", "n0114": "HTTP 設定檔 with ACME webroot（尚未掛 TLS）", "n0115": "HTTP 基本認證失敗", "n0116": "HTTPS 站點建議開啟", "n0117": "IMAP／POP 登入失敗", "n0118": "IP 准入政策未啟用（只影響查詢／enrich）", "n0119": "IP 無效", "n0120": "IPv4 前綴須 0–32", "n0121": "IPv6 前綴須 0–128", "n0122": "InnoDB 提交刷盤", "n0123": "InnoDB 日誌檔大小", "n0124": "InnoDB 緩衝池", "n0125": "安裝 and publish via 管理員 面板 (Webmail 安裝).", "n0126": "L7 爆量／異常流量", "n0127": "LLM 回應格式異常（缺少安全標記）", "n0128": "Let’s Encrypt HTTP-01 需要 80 可達；DNS-01 則需 介面 權杖。", "n0129": "LimitNOFILE 須為 64–10000000", "n0130": "MTU 須在 68–65535", "n0131": "MX 指向郵件主機名", "n0132": "MX 格式：優先級 主機（例如 10 mail.example.com.）", "n0133": "MariaDB 伺服器", "n0134": "MariaDB 特有：one-thread-per-connection / 程序池-of-threads", "n0135": "MySQL 伺服器", "n0136": "MySQL/MariaDB 客戶端", "n0137": "NetworkManager 不可用，無法寫入 DNS", "n0138": "Nginx 收緊限速（約 8 req/s）", "n0139": "Nginx 極嚴限速（約 3 req/s）", "n0140": "Nginx 溫和限速（約 20 req/s）", "n0141": "節點 多版本", "n0142": "節點 安裝失敗", "n0143": "節點.js 起步", "n0144": "OPcache 記憶體（MB）", "n0145": "PHP docroot + wp-config 範例（核心需另下載）", "n0146": "PHP 多版本", "n0147": "PHP 行程啟動後未取得行程編號", "n0148": "PHP 隔離 degraded — 未以專案 Linux 用戶（需要管理員權限 + 建立系統用戶）", "n0149": "PID 必須為正整數", "n0150": "PID 無效", "n0151": "PING 成功", "n0152": "PM2 啟動失敗 — 改用 pidfile 啟動", "n0153": "PM2 行程管理", "n0154": "POST 體積上限", "n0155": "Per-sender：依 envelope sender 網域 計 msgs/hour；超限 DEFER_IF_PERMIT", "n0156": "Postfix suspend map 已套用（check_recipient_access REJECT）", "n0157": "PostgreSQL 伺服器", "n0158": "PostgreSQL 伺服器尚未安裝", "n0159": "PostgreSQL 客戶端", "n0160": "PostgreSQL 服務未運行", "n0161": "PowerDNS 工具", "n0162": "主節點：建立 replication 用戶（SQL 腳本）", "n0163": "Python Django（骨架）", "n0164": "Python 多版本", "n0165": "Python 行為", "n0166": "RDB 快照規則", "n0167": "RDB 檔名", "n0168": "RUSTFLAGS（建置）", "n0169": "Redis dbIndex 須為 0–15", "n0170": "Redis 匯出 需要 系統變更權限已開啟", "n0171": "Redis 伺服器", "n0172": "Redis 伺服器尚未安裝或無法連線", "n0173": "Redis 啟動後仍無法 PING", "n0174": "Redis 客戶端", "n0175": "Redis 已啟動", "n0176": "Redis 還原需要 系統變更權限", "n0177": "Renewal via certbot.timer（dns-01 續期需自動化插件）", "n0178": "Rust 建置／執行", "n0179": "S3 儲存桶/路徑 未設定", "n0180": "SFTP .ssh 變更擁有者 需 管理員權限與系統變更權限", "n0181": "SIGKILL 需 confirmKill: 是", "n0182": "SMTP 濫用／暴力", "n0183": "SPF 政策", "n0184": "SRV 建議格式：priority weight 埠 目標", "n0185": "遠端登入 暴力破解", "n0186": "遠端登入 連線失敗", "n0187": "遠端登入 需要 系統變更權限已開啟", "n0188": "SSO 已驗證（單次）· 含自動登入密碼", "n0189": "SSO 已驗證（單次）· 無密碼", "n0190": "SST=mariabackup：各節點需 mariadb-備份", "n0191": "工作階段 儲存方式", "n0192": "工作階段 嚴格模式", "n0193": "工作階段 存活秒數", "n0194": "TCP 連接 (inuse)", "n0195": "TOTP 確認成功", "n0196": "TasksMax 須為 1–1000000", "n0197": "UFW 未安裝", "n0198": "UFW 狀態讀取失敗", "n0199": "清理 工作程序數", "n0200": "WAL 等級", "n0201": "Web + 郵件", "n0202": "Web UI: 找不到 (建置 apps/網站 or set YSK_WEB_ROOT)\\n", "n0203": "Web 主機", "n0204": "Web 介面建置", "n0205": "WebAuthn 註冊驗證失敗", "n0206": "WebDAV 未啟用", "n0207": "Webmail 域名無效", "n0208": "Wildcard／dns-01：certbot 需手動 TXT；面板會啟動流程但 DS/TXT 需於 DNS 提供商完成", "n0209": "WordPress（PHP 骨架）", "n0210": "YSK PHP 成功 — WordPress 尚未安裝\\\\n", "n0211": "系統變更權限 已開但進程非 管理員 — 部分 系統控制／nginx 重新載入 會 已封鎖", "n0212": "系統變更權限 已開啟", "n0213": "系統變更權限 未開 — 已寫入 ≠ 已套用", "n0214": "系統變更權限 未開 — 套用到系統的操作會 已封鎖", "n0215": "access 日誌 解析失敗", "n0216": "access=機群 需要 fleetAgentId", "n0217": "action 須為 reboot | poweroff | cancel", "n0218": "apex + www（多 邊緣 預留）+ cdn 主機名佔位", "n0219": "apex CNAME 在多數授權伺服器不建議／不相容", "n0220": "app.py 已存在 — 已略過", "n0221": "已套用 ≠ healthy — 請跑 探測 確認 wsrep", "n0222": "套用 後需 重新載入 sshd；錯誤 Match 可能鎖死 — 先 預覽試行", "n0223": "applySystem 已傳但本次無 suspend/autoreply 變更", "n0224": "apply_status=已寫入（控制面成功 ≠ 系統 MTA 已生效；加 applySystem:是 先套用）", "n0225": "apps/網站/dist 已存在", "n0226": "套件管理 列表 --upgradable：無輸出（可能無更新或 套件管理 未就緒）", "n0227": "套件管理 安裝失敗", "n0228": "套件管理-get 可用", "n0229": "auto 清理 關閉", "n0230": "已封鎖: 需要 HostExecutor + 系統變更權限已開啟", "n0231": "初始化 中止：節點 失敗", "n0232": "初始化 中止：套件管理 失敗", "n0233": "初始化 關鍵步驟失敗", "n0234": "candidateVersion 含非法字元", "n0235": "cargo 可執行檔", "n0236": "certbot 結束 0 — 檢查 /etc/letsencrypt/live/", "n0237": "變更擁有者 需要 系統變更權限 與管理員權限", "n0238": "clone 前已清除佔位應用檔（YSK scaffold / stub）", "n0239": "cluster_size 未知或 0", "n0240": "command 含 ysk-server / @ysk/伺服器 特徵", "n0241": "control plane 檔案未完成整", "n0242": "cwd 不可讀", "n0243": "dataDir 不存在", "n0244": "dataDir 缺 ysk.json — 控制面狀態未完成整", "n0245": "dataDir/電郵 已存在", "n0246": "dataDir/網站 已存在", "n0247": "database 找不到", "n0248": "db-util（FTP 帳戶庫）", "n0249": "deployNode 只適用於 節點 專案", "n0250": "df 無可用 mount（或全被過濾）", "n0251": "dig 不可用，改用 node dns", "n0252": "dig 無答案（NXDOMAIN 或空）", "n0253": "dns-01：面板不代填公網 TXT — 完成後再「分發 SSL」", "n0254": "dnssec-dsfromkey 未能產生 DS", "n0255": "dnssec-keygen 不在 PATH（套件管理 安裝 bind9-dnsutils）", "n0256": "dnssec-keygen 失敗", "n0257": "dnssec-signzone 不可用 — 只保留金鑰／DS", "n0258": "dnssec-signzone 未產生 .signed 檔", "n0259": "網域 必填", "n0260": "網域 找不到", "n0261": "dovecot 重新載入 失敗或服務未裝（sieve 檔已寫；不標假 重新載入 成功）", "n0262": "預覽試行機群派送（未入佇列）", "n0263": "預覽試行 對等節點 推送 計劃（未 安全複製）", "n0264": "預覽試行 remote 安裝（未 ssh）", "n0265": "預覽試行 傳輸 完成（略過 full 初始化）", "n0266": "預覽試行 — pass 套用/執行 才寫 主目錄 檔", "n0267": "預覽試行 — pass 套用/執行 才真正 ssh", "n0268": "預覽試行 — 未寫入 /etc", "n0269": "預覽試行 預設：加 --執行 先套用 ufw", "n0270": "預覽試行：inventory + preflight 通過，未 套件/傳輸", "n0271": "預覽試行：僅探測／計劃。加 --執行 且 系統變更權限已開啟 先真正 provision", "n0272": "預覽試行：已寫入管理檔（dataDir）。加 執行 + 系統變更權限已開啟 與管理員權限 先裝系統 drop-in", "n0273": "預覽試行：未封禁。加 --執行 且 系統變更權限已開啟 先真正 封鎖", "n0274": "預覽試行：未解封。加 --執行 且 系統變更權限已開啟 先真正 unban", "n0275": "dryRun=是 — 不實際變更 介面", "n0276": "dryRun：未寫入磁碟", "n0277": "匯出 已寫入 dataDir，尚未 傳輸", "n0278": "啟用 失敗", "n0279": "執行 模式（仍需 系統變更權限已開啟 與管理員權限）", "n0280": "執行 需要 enqueue 回調", "n0281": "export 僅限 管理員", "n0282": "fail2ban 套用指令失敗", "n0283": "fail2ban 服務", "n0284": "fail2ban 未 active", "n0285": "fail2ban 未在跑", "n0286": "fail2ban 活躍封禁", "n0287": "fail2ban 狀態讀取失敗", "n0288": "fail2ban：sshd、nginx-http-auth 等標準 jail", "n0289": "fd 計數不可用", "n0290": "檔案（檔案）", "n0291": "機群 清除 已封鎖 — 需 enqueue 或 遠端登入", "n0292": "機群 成員請用 db-叢集 機群 --op 探測 --執行", "n0293": "fromPanel 僅限 管理員", "n0294": "fromPanel 需要先 step-up：POST /api/v1/auth/totp/step-up", "n0295": "fullchain 必須是 PEM 憑證", "n0296": "gateway 須為純 IP", "n0297": "geo apex：無 EDNS 時寫入所有 geo 健康 邊緣 的 multi-A（不是真·用戶就近 Anycast）", "n0298": "geoMap 內無健康 邊緣 — 回退全部健康 邊緣", "n0299": "geo：未設定 geoMap — 等同 multi_a（全部健康 邊緣）。請在站點 dns.geoMap 填 region→nodeIds", "n0300": "git binary 找不到 on 路徑", "n0301": "git 可執行檔", "n0302": "go 可執行檔", "n0303": "healthUrl 必須是 http(s) URL", "n0304": "http-01 webroot — 需 80 端口可達且 ACME 設定檔 已 fan-out", "n0305": "identity 未綁定 linuxUser/project — 無法寫 authorized_keys", "n0306": "ignoreip 來源：dataDir/fail2ban/ignoreip.txt", "n0307": "index.html + CSS，供 Nginx 管理員 或靜態部署", "n0308": "安裝 設定檔 → 系統控制 重新啟動 mariadb（非 初始化 節點）", "n0309": "ip -j addr 無介面", "n0310": "job 無 manifest", "n0311": "系統日誌 來源；實際可讀性視權限", "n0312": "journalctl 可能需要 root 或使用者在 systemd-journal／adm 組", "n0313": "金鑰 不存在", "n0314": "金鑰 不存在或未刪除", "n0315": "kill -0 仍成功：進程可能為 zombie 或權限不足", "n0316": "kill -0 失敗", "n0317": "last_apply 已套用 但 已封鎖", "n0318": "last_apply 同時 成功=是 與 已封鎖（不誠實）", "n0319": "local cache 目錄空／新建", "n0320": "localhost 或 *", "n0321": "logical 資料庫 0 … N-1；改後需重啟", "n0322": "logrotate 已安裝", "n0323": "logrotate 未安裝或不在 PATH", "n0324": "main.py 已存在 — 已略過", "n0325": "manage.py + minimal settings/urls/wsgi；需 pip 安裝 django", "n0326": "manifest 無 dumpRelPath — 未打包？", "n0327": "manifest 無 rdbRelPath", "n0328": "memoryMax 格式須如 512M 或 1G", "n0329": "migrate 主機 需 --執行 + 系統變更權限已開啟，或 --預覽試行（僅 inventory+preflight）", "n0330": "migrate post 需 --執行 且 系統變更權限已開啟（在目標機執行）", "n0331": "migrate post 需要 系統變更權限已開啟", "n0332": "migrate post 需要 系統變更權限已開啟（應在目標機執行）", "n0333": "minimal 初始化 失敗", "n0334": "mysql 客戶端", "n0335": "mysql-從節點 僅支援 mysql 引擎", "n0336": "mysql_databases 列缺 名稱", "n0337": "named-checkzone 不在 PATH — 檔已寫入，語法未驗證", "n0338": "nginx -t 或 重新載入 失敗", "n0339": "nginx -t 未通過，未重載", "n0340": "nginx 重新載入 成功 · 狀態：已套用", "n0341": "nginx 重新載入 失敗", "n0342": "nginx 可執行檔", "n0343": "nginx 執行層已關閉（enforce.nginx=否）", "n0344": "nginx 服務", "n0345": "nice 須在 -20（最高優先）至 19（最低）", "n0346": "node 可執行檔", "n0347": "npm latest 缺少版本資訊", "n0348": "npm 指令 結束 0 但仍找不到 binary — 套件可能未提供 命令列 或 路徑 未更新", "n0349": "nullok 避免未寫檔用戶被鎖", "n0350": "nullok：無 .google_authenticator 的用戶仍可用 金鑰 登入", "n0351": "open_basedir 路徑限制", "n0352": "openssl 不可用，改用 YSK-SCRYPT 雜湊", "n0353": "openssl（信箱雜湊）", "n0354": "optionalEtc 失敗不中止 傳輸（可於目標重簽憑證）", "n0355": "origin shield：此節點為 shield，直接連 origin", "n0356": "origin.kind 必須是 project 或 url", "n0357": "origin.project 需要 projectId", "n0358": "origin.url 必須是 http(s) URL", "n0359": "originShieldNodeId 必須在 edgeNodeIds 內", "n0360": "套件 匯出 未完成 — 禁止 傳輸", "n0361": "套件 失敗 — 不得進入 傳輸", "n0362": "套件 需要 系統變更權限已開啟", "n0363": "pam.d/sshd 尚未引用 pam_google_authenticator（檔寫了也未 enforce）", "n0364": "面板 尚未設定 雙重驗證 或無 secret — 請先在「我的安全」啟用 TOTP", "n0365": "面板 無 TOTP secret — 先在 Web 啟用 雙重驗證 或勿用 --from-面板", "n0366": "面板 需把 login 失敗寫入可被 fail2ban 讀的 日誌（系統日誌 或檔）", "n0367": "passkey 已登記", "n0368": "passkey 驗證失敗", "n0369": "passkey 驗證成功", "n0370": "pdnsutil 找不到 — 安裝 PowerDNS tools or run helper script as 管理員 after 安裝", "n0371": "對等節點 遠端登入 探測 需 系統變更權限已開啟（已只做本機）", "n0372": "對等節點 未探測（只 探測 本機）", "n0373": "對等節點 節點仍需各自套用 設定檔 並 join", "n0374": "php binary 找不到 — 安裝 php-cli", "n0375": "php 可執行檔", "n0376": "php 未在 PATH", "n0377": "pidfile 以控制面用戶啟動（degraded）", "n0378": "pidfile 啟動未取得 pid", "n0379": "pm2 不在 PATH（仍可用 pidfile／系統服務）", "n0380": "pm2 找不到 on 路徑 — 安裝: npm i -g pm2", "n0381": "post-傳輸 停在 reapply", "n0382": "post-傳輸 停在 還原", "n0383": "postconf 未能確認 message_rate_limit（不當完整 已套用）", "n0384": "kind postgres-replica 需要 --engine postgres", "n0385": "postgres_databases 列缺 名稱", "n0386": "postqueue 不可用或郵件堆疊未安裝", "n0387": "preflight 失敗", "n0388": "主節點 無 binlog / 主節點 狀態 空", "n0389": "privkey 必須是 PEM 私鑰", "n0390": "productionReady 未達標（資料可能已齊）", "n0391": "ps 輸出無進程列", "n0392": "ps 降級：無 --sort／精簡欄位", "n0393": "ps 降級：無 pri/vsz/stat 等欄", "n0394": "psql 客戶端", "n0395": "清除 全部失敗或無目標", "n0396": "python3 可執行檔", "n0397": "已排隊 ≠ 邊緣 已 清除", "n0398": "已排隊 ≠ 邊緣 已 重新載入 — 代理 需拉取並執行 cdn.邊緣.套用", "n0399": "已排隊 ≠ 邊緣 已執行 — Agents 紀錄查看 結束/JSON", "n0400": "realpath 快取大小", "n0401": "realpath 快取秒數", "n0402": "reapply 需要 系統變更權限已開啟", "n0403": "redis 叢集僅支援 redis", "n0404": "registry shasum 非 sha256（npm 常用 sha1）— 以 npm integrity 為準", "n0405": "重新載入/重新啟動 失敗", "n0406": "remote post 失敗 — 可於目標機手動 migrate post", "n0407": "Restic 增量備份完成（已寫入/已套用 視 Restic 結束）", "n0408": "Restic 已啟用但未設定 密碼 — 拒絕使用內建預設密碼（請在備份設定填寫）", "n0409": "Restic 未啟用", "n0410": "Restic 未啟用 — 無法列出 快照", "n0411": "Restic 未啟用 — 請先在「遠端／排除」開啟並設定 密碼", "n0412": "Restic 未啟用（僅 封存）", "n0413": "Restic 未啟用（略過增量）", "n0414": "Restic 未安裝（不在 PATH），請於系統安裝 Restic 後再試", "n0415": "還原 成功；略過 reapply/verify", "n0416": "還原 完成", "n0417": "還原 有失敗項", "n0418": "還原 未完全成功", "n0419": "還原 需要 系統變更權限已開啟", "n0420": "還原+reapply 成功；略過 verify", "n0421": "同步複製 dataDir 失敗", "n0422": "同步複製 需要 系統變更權限已開啟", "n0423": "安全複製 已寫入但無法 重新載入：遠端無 rndc/named/bind9/pdns", "n0424": "安全複製 成功 ≠ 對等節點 已 重新啟動 / 已 join", "n0425": "secrets 金鑰 可用", "n0426": "secrets 主節點 金鑰 存在", "n0427": "哨兵 模式但未登記 哨兵 角色成員", "n0428": "哨兵：INFO replication 僅作參考；請查 哨兵 masters", "n0429": "伺服器 IP 必須是 IPv4", "n0430": "伺服器 IPv6 無效", "n0431": "setquota 不在 PATH — 僅控制面軟配額（deploy 前 du 擋）", "n0432": "shell 路徑無效", "n0433": "signal 必須為 TERM | KILL | HUP | USR1", "n0434": "ssh 是 成功 → verified", "n0435": "sshd keyboard-interactive / challenge-response 似已開啟", "n0436": "sshd 可能未開 KbdInteractiveAuthentication — TOTP 無法在 遠端登入 提示", "n0437": "sshpass 可用（密碼登入）", "n0438": "strict Match 僅針對已寫檔用戶（密碼 off）", "n0439": "symlink 指向敏感路徑", "n0440": "symlink 逃出 日誌 目錄", "n0441": "symlink 逃出專案 主目錄", "n0442": "系統控制 指令失敗", "n0443": "系統服務 啟用失敗 — 改試 PM2／pidfile", "n0444": "系統服務 啟用未能執行：需要系統變更權限與管理員", "n0445": "目標 格式：用戶@主機 或 用戶@主機:埠", "n0446": "權杖 已使用", "n0447": "權杖 已過期", "n0448": "top -b 不可用（進程表仍以 ps 為準）", "n0449": "傳輸 中止：dataDir 同步複製 失敗", "n0450": "傳輸 中止：無法建立遠端目錄", "n0451": "傳輸 完成（略過 full 初始化）", "n0452": "傳輸 已完成，但目標 還原/reapply/verify 失敗", "n0453": "傳輸 有失敗項", "n0454": "傳輸 校驗失敗", "n0455": "傳輸 需要 系統變更權限已開啟", "n0456": "傳輸/初始化 失敗", "n0457": "ufw 指令執行失敗", "n0458": "服務單元 與 action 必填", "n0459": "useradd 需要 系統變更權限 與管理員權限", "n0460": "value 過大（上限 256KB）", "n0461": "verify 有關鍵不一致", "n0462": "verify 未通過 — 不得視為遷移完成", "n0463": "verify 通過 — job=done", "n0464": "vsftpd 啟動失敗", "n0465": "vsftpd 未能成功啟動", "n0466": "weighted: 無 邊緣", "n0467": "wp-config.php 已存在 — 已略過", "n0468": "已寫入 ≠ Dovecot Pigeonhole 已載入 — 需 ManageSieve 或 symlink 到 用戶 sieve", "n0469": "已寫入 ≠ Roundcube 已載入 — 用 enableSystem 或手動 symlink", "n0470": "已寫入不等於已套用：需同步到系統 conf.d，並通過 nginx 檢查後重新載入", "n0471": "已寫入 ≠ 公開可連 — 需 reverse proxy 到面板 /webdav", "n0472": "已寫入 ≠ 線上行程已重載", "n0473": "ysk-server 命令列 安裝失敗 — 可稍後手動 npm i -g ysk-server", "n0474": "ysk-網站 群組供 Nginx/www-data 讀靜態（非 world-readable）", "n0475": "ysk-網站 群組需 系統變更權限 與管理員權限（靜態 Nginx 可能無法讀 750 主目錄）", "n0476": "ysk.json fingerprint 已變（可能 reapply 寫回）local≠source", "n0477": "ysk.json fingerprint 與來源一致", "n0478": "ysk.json fingerprint 與來源不同（若只清了 bind_ip 屬預期）", "n0479": "ysk.json 存在", "n0480": "ysk.json 校驗失敗", "n0481": "zone 套用 已封鎖（無 執行）— 記錄已更新於控制面", "n0482": "zone rectify 完成", "n0483": "zone 名稱無效", "n0484": "zone 找不到", "n0485": "zone 解析失敗", "n0486": "一般查詢日誌", "n0487": "一鍵安裝", "n0488": "一鍵建立完成（draft 資源請到各頁「套用」）", "n0489": "上傳與 POST", "n0490": "上次全部備份有失敗", "n0491": "下一步：寫入 設定檔 → 套用 edges → DNS 同步（及可選 SSL）", "n0492": "下一步：將 PAM 片段併入 /etc/pam.d/sshd（nullok）", "n0493": "下一步：系統安裝 libpam-google-authenticator + 合併 PAM 片段（見下方）", "n0494": "不可刪除沙箱根目錄", "n0495": "不可刪除沙箱根目錄或回收桶路徑", "n0496": "不存在", "n0497": "不支援此操作方法", "n0498": "不支援的訊號（只允許 TERM / KILL / HUP / USR1）", "n0499": "不是資料夾", "n0500": "不能刪除最後一個 管理員", "n0501": "中繼埠號無效", "n0502": "中繼已套用到系統", "n0503": "中繼設定已寫入 dataDir（套用到系統需開啟系統變更）", "n0504": "主機 memory 使用率超過 90%", "n0505": "主機指標", "n0506": "主要記憶體快取，通常為 RAM 50–70%", "n0507": "二進位不在 PATH，服務無法就緒", "n0508": "二進制日誌", "n0509": "互動逾時（秒）", "n0510": "人必須做：雲防火牆、郵件 PTR/rDNS、舊機保留觀察期", "n0511": "今日已自動 清理", "n0512": "仍需到 定時工作 頁「安裝到系統 定時工作表」才會真正生效", "n0513": "以 Nginx 管理員 或「靜態部署」提供 public/", "n0514": "以 管理員 啟動 ysk-server 服務（系統控制 / 控制面 服務單元）", "n0515": "以 管理員 啟動並設定 系統變更權限已開啟（見主機設定／部署文件）", "n0516": "以控制面用戶執行指令（degraded — 非專案 Linux 用戶）", "n0517": "任意 shell — 預設拒絕", "n0518": "伺服器字元集", "n0519": "伺服器尚未安裝對應程式（command -v 無結果）", "n0520": "伺服器排序規則", "n0521": "伺服器未安裝 MySQL 客戶端", "n0522": "伺服器未安裝 PostgreSQL 客戶端", "n0523": "伺服器未安裝 Redis 客戶端", "n0524": "伺服器未安裝必要元件，無法在管理面板完成此操作", "n0525": "伺服器未開啟 系統變更權限", "n0526": "伺服器未開啟系統變更權限或缺少 管理員，無法在管理面板完成安裝", "n0527": "伺服器未開啟系統變更權限，無法匯出 Redis", "n0528": "伺服器未開啟系統變更權限，無法在管理面板下載安裝 Webmail", "n0529": "伺服器未開啟系統變更權限，無法完成套用", "n0530": "伺服器未開啟系統變更權限，無法建立 遠端登入 連線", "n0531": "伺服器未開啟系統變更權限，無法打包 匯出", "n0532": "伺服器未開啟系統變更權限，管理面板無法完成系統層操作", "n0533": "伺服器未開啟系統變更權限：已寫入管理檔，無法 named-checkzone / 重新載入", "n0534": "伺服器監聽埠", "n0535": "佇列為空", "n0536": "位元碼快取", "n0537": "使用 YSK-SCRYPT 後備雜湊（生產環境建議改為 openssl 雜湊）", "n0538": "使用 YSK_SECRETS_KEY", "n0539": "使用 baseUrl/.ysk-cdn-health 預設探活路徑（C2 可裝 health location）", "n0540": "使用呼叫端指定版本（latestOverride）", "n0541": "使用環境變數 YSK_LATEST_VERSION（離線／測試覆蓋）", "n0542": "來源不可用", "n0543": "來源缺 mysqldump — 套件 階段將無法匯出 MySQL", "n0544": "來源缺 pg_dump — 套件 階段將無法匯出 Postgres", "n0545": "來源缺 redis-cli — 套件 階段將無法匯出 Redis RDB", "n0546": "來源缺 sshpass", "n0547": "來源需要 同步複製（未安裝）", "n0548": "來源預檢未通過", "n0549": "來源預檢通過", "n0550": "例如 128M、256M、512M、-1（無限）", "n0551": "例如 512MiB；留空不設", "n0552": "例如 900 1 300 10；空字串關閉", "n0553": "到 /agents 複製 session UUID 填入叢集表單，或 CLI --member 10.0.0.3=從節點:機群:SESSION_UUID", "n0554": "供應商 = ASN（自治系統），非消費品牌名", "n0555": "保持 22/80/443；受攻擊時可手動關非必要埠", "n0556": "保留策略：最近 10 份", "n0557": "保護 ysk-server process.pid", "n0558": "保護模式", "n0559": "偵測到 pam_google_authenticator 模組", "n0560": "備份 封存 成功但遠端／Restic 有問題", "n0561": "僅 管理員", "n0562": "僅 管理員 可 impersonate", "n0563": "僅 管理員 可執行整機電源操作", "n0564": "僅 apex A", "n0565": "已列出託管設定（未寫入系統）", "n0566": "僅寫入 PM2 設定，未啟動程序", "n0567": "僅寫入管理檔（未要求重載）", "n0568": "僅寫入管理設定 — 就緒後再發布並重載", "n0569": "僅寫入範本（未要求 啟用）", "n0570": "僅控制面登記（套用:否）；密碼只回傳一次", "n0571": "僅支援 postgres + postgres-從節點", "n0572": "僅支援 redis + redis-從節點|redis-哨兵", "n0573": "僅有磁碟佔用粗估，不是 HIT 比率", "n0574": "僅見 stub resolv（127.0.0.53）；實際上行 DNS 請看 resolvectl", "n0575": "僅警告，可繼續", "n0576": "儀表為控制面彙總；公網流量／真實 CDN 命中率需 邊緣 access 日誌 含 cache 狀態", "n0577": "儲存後會於下次部署寫入 系統服務 Environment / 行程 env", "n0578": "允許 URL include", "n0579": "允許 URL 當檔案開", "n0580": "允許上傳檔案", "n0581": "免費最高細分：國家 + 省／州 + 城市（enrich）+ ASN；城市政策預設關", "n0582": "全部 邊緣 fan-out 已套用", "n0583": "全部 邊緣 fan-out 失敗", "n0584": "全部 邊緣 清除 成功", "n0585": "全部 對等節點 nameserver 已 重新載入", "n0586": "全部 對等節點 重新載入 失敗 — 檔案可能已在磁碟但權威未重新整理", "n0587": "全部 對等節點 失敗", "n0588": "全部 對等節點：zone 已推送並 remote 重新載入 成功", "n0589": "全部成功", "n0590": "全部略過（沒有可備份的 主目錄）— 不視為失敗", "n0591": "共享緩衝", "n0592": "共用同一 RDB，已還原", "n0593": "其他執行期變數", "n0594": "其他常用", "n0595": "分享不存在或已過期", "n0596": "分數極高 — 建議人手套用「緊急」檔（永不自動）", "n0597": "分數極高 — 緊急檔需人手確認（永不自動）", "n0598": "列出目錄", "n0599": "列出行程", "n0600": "刪除 預設 路由需 confirmDefault: 是", "n0601": "刪除檔案或目錄", "n0602": "刪除系統用戶 — 預設拒絕", "n0603": "刪除被阻擋：未開啟系統變更權限，且路徑在管理資料目錄外", "n0604": "到 fail2ban 頁套用並 啟用 服務", "n0605": "到封禁頁一鍵開啟（soft／normal）", "n0606": "加固", "n0607": "匯出不存在或已過期", "n0608": "受攻擊", "n0609": "另開 21 與 PASV 段", "n0610": "只寫管理檔", "n0611": "可套用系統", "n0612": "可手動打包 dataDir/clusters/<識別碼>/", "n0613": "可檢視設定；安裝／重啟／寫入系統設定需要系統變更權限", "n0614": "可考慮切回「日常」或「加固」", "n0615": "可選安裝 pm2：npm i -g pm2", "n0616": "可選：SSL、WP-命令列、外掛", "n0617": "同步帳戶", "n0618": "否則只允許還原到 .Restic-還原-* 安全目錄", "n0619": "啟動、停止、重啟、開機自啟", "n0620": "啟動行程後未取得行程編號", "n0621": "啟用 OPcache", "n0622": "啟用 SSL", "n0623": "啟用中", "n0624": "單一檔案上限", "n0625": "單次最多檔案數", "n0626": "單節點有 wsrep，但 HA 需 ≥2 節點", "n0627": "在「資源」建立 MySQL（或填入現有 資料庫）並設 WP_DB_* 環境變數", "n0628": "域名尚無郵箱 — 只保留 網域-level vacation 草稿", "n0629": "域名無效", "n0630": "域名狀態：active（控制面旗標）", "n0631": "域名狀態：suspended（控制面旗標；不等於 Postfix 已拒信）", "n0632": "埠、綁定、連線上限", "n0633": "埠檢查異常", "n0634": "執行", "n0635": "執行緒模型", "n0636": "壓縮檔不支援預覽（.gz 等）", "n0637": "壞 Bot", "n0638": "外網探測", "n0639": "失控時最後手段", "n0640": "套件名不合法", "n0641": "套件安裝未能執行：需要系統變更權限", "n0642": "套件更新需要系統管理員權限", "n0643": "套用到 vsftpd", "n0644": "套用到系統", "n0645": "套用防護檔只會寫管理檔；需 系統變更權限已開啟 與管理員權限 才 已套用", "n0646": "威脅已回落", "n0647": "字串 intern 緩衝（MB）", "n0648": "存取密碼", "n0649": "存在錯誤級問題，請修正後再 套用", "n0650": "請先到「安全 → 我的安全」開啟管理員雙重驗證，再到「用戶」新增備援管理員。", "n0651": "安全與路徑", "n0652": "安裝 PAM", "n0653": "安裝 vsftpd", "n0654": "安裝失敗", "n0655": "安裝套件", "n0656": "安裝完成", "n0657": "安裝步驟", "n0658": "安裝系統設定", "n0659": "完整", "n0660": "客戶端閒置逾時", "n0661": "密碼加密", "n0662": "密碼只出現在 SQL 腳本佔位符 請自行更改", "n0663": "密碼已以 crypt 雜湊儲存（不存明文）", "n0664": "密碼為空", "n0665": "密碼登入需要 sshpass", "n0666": "密碼登入需要本機安裝 sshpass", "n0667": "密碼至少需要 8 字元", "n0668": "密碼過短（至少 8 字）— 郵箱已建立但未寫入雜湊", "n0669": "密碼需由安全管道設定", "n0670": "審批仍在等待中", "n0671": "審批動作與請求不符", "n0672": "審批已被拒絕", "n0673": "寫入 NODE_OPTIONS=--max-old-space-size=N", "n0674": "寫入 Nginx 限速 drop-in", "n0675": "寫入 主目錄 檔 ≠ PAM 已生效", "n0676": "寫入失敗", "n0677": "寫入帳戶檔", "n0678": "寫入檔案", "n0679": "封存模式", "n0680": "將片段 Include 到 sshd_config，或 POST /api/v1/sftp/sshd-snippet/apply 安裝", "n0681": "專案 Linux 用戶隔離", "n0682": "專案 識別碼 必填", "n0683": "專案 識別碼 無效，無法產生 主目錄", "n0684": "專案 識別碼 過短，無法產生系統用戶名", "n0685": "專案 internal-sftp Match 用戶通常不走 interactive shell — TOTP 主要影響 遠端登入 shell/安全複製", "n0686": "專案 managed 日誌 無效", "n0687": "專案不存在", "n0688": "專案不存在或未設定 主目錄", "n0689": "專案名稱無法產生有效系統用戶名", "n0690": "專案已恢復", "n0691": "專案已暫停（503）", "n0692": "專案建立失敗，已中止", "n0693": "專案沒有 網域 — 請先設定主域名", "n0694": "專案無 linux_user", "n0695": "專案級 清除 目前清主機共用 nginx cache 目錄（非 per-vhost zone）", "n0696": "專案缺少 linuxUser — 無法建立對齊隔離的 FTP 帳戶", "n0697": "專案缺少 linux_user", "n0698": "專案覆寫只填要改的鍵；空白＝沿用全域", "n0699": "專案詳情 → 隔離 → 建立系統用戶／遷移到 /home/ysk-server-{識別碼}（需 系統變更權限 與管理員權限）", "n0700": "對齊 jail 擁有權", "n0701": "尚未 os_provisioned", "n0702": "尚未下載 GeoIP 庫 — 請在防護中心「IP 准入」按更新", "n0703": "尚未分配埠，請先部署專案", "n0704": "尚未同步到系統 Nginx（僅管理檔）", "n0705": "尚未在伺服器建立 Redis 資源，請確認 redis-cli、TCP 與 系統變更權限已開啟", "n0706": "尚未套用到 vsftpd 服務 — 請使用「套用」或 vsftpd 服務頁完成啟動", "n0707": "尚未套用郵件域名", "n0708": "尚未建置 Web 介面 — 僅 介面 模式", "n0709": "尚未有本地 GeoIP 庫 — 請更新", "n0710": "尚未產生 DNSSEC 金鑰", "n0711": "尚未登記 CDN 節點", "n0712": "尚未登記 passkey", "n0713": "尚未確認維護窗（套件 階段會停服）", "n0714": "尚未設定 LLM 連線", "n0715": "尚未載入 zone：請於管理面板重試", "n0716": "尚無 CDN 站點", "n0717": "尚無託管 Nginx 設定檔", "n0718": "尚無可用 HIT/MISS 抽樣 — overall hit-rate 未知", "n0719": "尚無專案", "n0720": "尚無產物 — 請先 計劃", "n0721": "就緒", "n0722": "工作階段儲存與 cookie", "n0723": "已 啟用 --now fail2ban", "n0724": "已 galera_new_cluster（初始化）", "n0725": "已 重新載入 fail2ban", "n0726": "已 重新載入 nginx", "n0727": "已 重新啟動 fail2ban", "n0728": "已 安全複製 zone 檔（已寫入 on 對等節點 ≠ named reloaded）", "n0729": "已 安全複製 到 對等節點 暫存目錄（已寫入 on 對等節點 ≠ service restarted）", "n0730": "已 系統控制 重新載入 nginx", "n0731": "已下載並解壓 Roundcube", "n0732": "已停用 UFW（警告：主機埠將直接暴露）", "n0733": "已儲存專案 php.ini 覆寫；重新套用 FPM／部署後生效", "n0734": "已儲存管理設定（未套用到系統服務）", "n0735": "已儲存設定（未要求套用系統）", "n0736": "已刪除", "n0737": "已刪除 金鑰 · 重寫 authorized_keys", "n0738": "已刪除叢集登記；系統 設定檔 需人手清理（v1 不自動拆除）", "n0739": "已刪除本機臨時金鑰", "n0740": "已即時 ip addr add（設定檔已寫入，重開應仍在）", "n0741": "已即時套用 databases（部分選項仍需重啟）", "n0742": "已取消排程關機／重啟", "n0743": "已同步到系統並重載", "n0744": "已啟動", "n0745": "已啟用 HSTS", "n0746": "已啟用 NTP 同步", "n0747": "已啟用 UFW", "n0748": "已啟用 WebDAV · Basic 用戶 ysk · 密碼為本次 權杖（只顯示一次）", "n0749": "已啟用 系統服務 服務", "n0750": "已嘗試 stop redis", "n0751": "已嘗試清除 nginx cache 目錄並 重新載入（若主機未開 proxy_cache 則可能無檔可清）", "n0752": "已在伺服器完成憑證申請流程", "n0753": "已套用 CF-only UFW（origin 只收 CF + 保留埠）", "n0754": "已套用 fail2ban", "n0755": "已套用中繼設定到系統 Postfix", "n0756": "已套用到系統 Nginx", "n0757": "已套用防火牆規則", "n0758": "已安裝並嘗試啟用 ysk-server.service", "n0759": "已安裝到目前程序用戶的系統 定時工作表", "n0760": "已寫入 .google_authenticator（含 5 組 scratch codes）", "n0761": "已寫入 rspamd multimap + postfix snippet", "n0762": "已寫入安裝腳本", "n0763": "已寫入控制面；請用「套用限制到 OS」或重新 Deploy 寫入 服務單元", "n0764": "已寫入管理 jail.local（未要求套用系統）", "n0765": "已寫入管理檔；尚未套用到系統 conf.d", "n0766": "已寫入設定檔（未下載套件）", "n0767": "已寫入調校檔；重新部署專案後才會進線上行程", "n0768": "已寫管理檔，但未套用系統 設定檔：需 系統變更權限已開啟", "n0769": "已寫管理檔，但未套用系統 設定檔：需要 管理員", "n0770": "已封鎖：無真實 candidateVersion", "n0771": "已封鎖：需確認高風險更新", "n0772": "已封鎖：需要管理員權限", "n0773": "已建立 DNSSEC 目錄（僅說明檔）", "n0774": "已從", "n0775": "已從庫移除（disk 安裝 未自動清除；用 卸載 --清除）", "n0776": "已從控制面移除；系統帳號需手動 刪除 用戶（誠實：未自動 drop）", "n0777": "已從連線", "n0778": "已拒絕", "n0779": "已拒絕 by 允許清單", "n0780": "已拒絕：無真實升級目標", "n0781": "已掃描 nginx access 日誌 樣本", "n0782": "已於 MySQL/MariaDB 建立只讀用戶", "n0783": "已於 PostgreSQL 建立只讀角色", "n0784": "已是最新版本（頻道已確認）", "n0785": "已暫停", "n0786": "已清空全部佇列", "n0787": "已清除 catch-all", "n0788": "已產生 DS 紀錄（請自行提交 registrar — 面板不會自動發佈）", "n0789": "已產生加密備份（同一 dataDir 主節點 金鑰 可解密）", "n0790": "已用 SHA512-CRYPT 雜湊密碼（Dovecot）", "n0791": "已略過 Nginx 設定檢查（未安裝或未開系統變更權限）", "n0792": "已登記上傳憑證路徑（檔案置於 /etc/ysk-server/certs）", "n0793": "已知惡意 UA", "n0794": "已確認", "n0795": "已確認維護窗", "n0796": "已移除控制面登記", "n0797": "已移除登記紀錄", "n0798": "已符合意圖隔離，無需遷移", "n0799": "已裝版本 = 套件管理 Candidate，無可用升級", "n0800": "已複製到 /etc/fail2ban/jail.local", "n0801": "已退役（磁碟檔案未自動刪；可 卸載）", "n0802": "已送出立即重啟指令", "n0803": "已送出立即關機指令", "n0804": "已重啟 postgresql", "n0805": "已重啟 redis-伺服器", "n0806": "已重啟 redis-伺服器 以套用需重啟項目", "n0807": "已重啟（重載不支援）", "n0808": "已重新啟用連線（重開仍在）", "n0809": "已重渲染 TLS 邊緣 設定檔（控制面）", "n0810": "已重載 Nginx (static site live if DNS points here)", "n0811": "已重新載入 Nginx", "n0812": "已開啟系統變更權限（系統變更權限）", "n0813": "已附一次性登入密碼 — Roundcube 外掛可自動 login", "n0814": "帳戶已登記於管理面；需系統權限才能讓 FTP 服務生效", "n0815": "帳號已解鎖 (usermod -U)", "n0816": "帳號已鎖定 (usermod -L)", "n0817": "常見漏洞路徑掃描", "n0818": "庫中無此 IP 記錄", "n0819": "建立系統用戶需要系統管理員權限", "n0820": "建立郵件域名並於詳情頁套用", "n0821": "建置完成", "n0822": "建議切換至「受攻擊」防護檔", "n0823": "建議檢查 遠端登入 與非必要埠", "n0824": "建議緊急檔", "n0825": "建議至少 1 個 從節點；目前計劃仍可產生 主節點 設定檔", "n0826": "建議至少 2 個節點（生產建議 3）；而家計劃仍可產生", "n0827": "建議開啟 CDN Under Attack 模式", "n0828": "建議開啟自動 封鎖", "n0829": "強制 HTTPS（HTTP→301）", "n0830": "強制安全傳輸", "n0831": "強制離線模式", "n0832": "恢復：控制面 狀態=active", "n0833": "慢查詢日誌", "n0834": "慢查詢閾值（ms）", "n0835": "慢查詢閾值（秒）", "n0836": "憑證申請失敗", "n0837": "應 ≥ 單一檔案上限", "n0838": "應設定保留策略清理舊備份", "n0839": "成功僅代表此 目標 可 BatchMode 登入，≠ 全域授權", "n0840": "或整數如 32767", "n0841": "所需軟件均已安裝", "n0842": "打包被權限/工具阻擋", "n0843": "批量封禁", "n0844": "找不到 命令列 binary — 系統服務 不會 啟用 成 silent placeholder", "n0845": "找不到 DNS zone — 請在站點 dns.zoneId 指定，或先建立匹配域名的 zone", "n0846": "找不到 PowerDNS 工具 — 請安裝 pdns-server / pdns-tools", "n0847": "找不到 Roundcube plugins 目錄 — 已寫骨架；請安裝 Roundcube 或傳 roundcubePluginsDir", "n0848": "找不到 SQL 檔", "n0849": "找不到 Sieve 腳本", "n0850": "找不到 config.inc.php — 請手動: $config[\\'plugins\\'][] = \\'ysk_sso\\';", "n0851": "找不到 邊緣.設定檔 — 請先渲染", "n0852": "找不到 金鑰", "n0853": "找不到 migrate job", "n0854": "找不到 pm2 — 無法以 PM2 停止", "n0855": "找不到別名", "n0856": "找不到叢集", "n0857": "找不到可 重新載入 的本機 nameserver（rndc/named/bind9/pdns）", "n0858": "找不到可用憑證 — 請先於 SSL 頁上傳，或執行 LE 簽發", "n0859": "找不到可用的 NetworkManager 連線", "n0860": "找不到回收項目", "n0861": "找不到實例", "n0862": "找不到專案 access 日誌 — 請確認 nginx access_log 路徑或日誌檔存在", "n0863": "找不到方案", "n0864": "找不到步驟", "n0865": "找不到版本", "n0866": "找不到節點", "n0867": "找不到資料庫", "n0868": "拒絕", "n0869": "拒絕 down loopback", "n0870": "拒絕 renice 自身控制面進程", "n0871": "拒絕 系統控制 啟用：未安裝真實 代理 命令列（避免 placeholder 假 running）", "n0872": "拒絕修改 loopback 位址（保護）", "n0873": "拒絕刪除 loopback 核心地址", "n0874": "拒絕覆寫 homeDir — 請設 overwriteHome + confirmPhrase 或改用安全目標目錄", "n0875": "拒絕訊號 PID 1（init/系統服務 保護）", "n0876": "拒絕訊號疑似 ysk 控制面進程；進階可 forceControlPlane", "n0877": "拒絕訊號自身進程（ysk-server）；若確定需要請 forceSelf", "n0878": "拒絕讀取敏感路徑", "n0879": "拒絕路徑穿越或非法字元", "n0880": "持久 預設 路由需要 Gateway", "n0881": "持久化", "n0882": "指令參數為空", "n0883": "指令被阻擋：變更主機需開啟系統變更權限（系統變更權限）", "n0884": "掃描", "n0885": "掃描路徑", "n0886": "探測 INFO replication", "n0887": "探測 SHOW 主節點 / 從節點 狀態", "n0888": "探測 pg_is_in_recovery / pg_stat_replication", "n0889": "探測 wsrep（SHOW 狀態 LIKE 'wsrep%'）", "n0890": "控制面已寫入但尚未 已套用 到系統 — 檢查各功能頁「套用」", "n0891": "控制面維持正常模式", "n0892": "控制面緊急降級（local ops）", "n0893": "控制面資料目錄", "n0894": "控制面進入 ddos-protection 提示", "n0895": "推送結果未完成整（partial/失敗）", "n0896": "提升連線速度，僅用 IP 授權", "n0897": "提示：填 Cloudflare zones + CF_API_TOKEN 先可 Under Attack 介面", "n0898": "操作無法完成", "n0899": "收緊 Nginx 限速並強化 fail2ban", "n0900": "效能與資源", "n0901": "新 IP／域名不宜立刻高量出站。請檢查 Spamhaus 等黑名單，並遵循暖機指引。", "n0902": "新增 A／AAAA（apex 與 www）", "n0903": "新增 DMARC TXT 記錄", "n0904": "新增 MX／SPF／DKIM DNS 記錄", "n0905": "新增 _dmarc TXT 以改善投遞與回報。", "n0906": "方式 + 閾值", "n0907": "於 DNS 供應商新增產生的 MX、SPF（TXT）與 DKIM（TXT）。Cloudflare：郵件相關記錄請用僅 DNS（灰雲）。", "n0908": "於 DNS 頁安裝 PowerDNS 相關套件", "n0909": "於面板 Go 執行環境安裝目標版本", "n0910": "於面板 節點 執行環境安裝目標版本", "n0911": "於面板 PHP 執行環境安裝目標版本", "n0912": "於面板 Python 執行環境安裝目標版本", "n0913": "於面板 Rust 執行環境安裝 rustup／cargo", "n0914": "日常", "n0915": "日誌", "n0916": "日誌建議寫入專案 日誌 目錄", "n0917": "日誌收集器", "n0918": "日誌檔", "n0919": "日誌相對路徑含不允許字元", "n0920": "日誌等級", "n0921": "日誌路徑無效", "n0922": "時區", "n0923": "時區與字元", "n0924": "暫存表大小", "n0925": "暴露 PHP 版本頭", "n0926": "更多 fail2ban jail、更快封禁", "n0927": "更強隔離請使用獨立 Redis 實例", "n0928": "更新 fail2ban jail 清單（管理檔）", "n0929": "更新未完成", "n0930": "最嚴 Nginx 限連（約 1 req/s）", "n0931": "最多 12 個額外目錄", "n0932": "最多 8 個 nameserver", "n0933": "最多快取檔案數", "n0934": "最多輸入變數", "n0935": "最大 WAL", "n0936": "最大客戶端數", "n0937": "最大記憶體", "n0938": "最大連線錯誤", "n0939": "最小", "n0940": "最小 HTTP 伺服器（/health）+ public 靜態目錄", "n0941": "最長執行時間", "n0942": "最長輸入時間", "n0943": "有可用升級", "n0944": "有掃描／暴力跡象時", "n0945": "有效快取估計", "n0946": "有資料庫/Redis 匯出 失敗，已中止（不會 傳輸）", "n0947": "服務名稱無效", "n0948": "未下載 WordPress 核心（需外網／另下）— 見 WORDPRESS_INSTALL.txt", "n0949": "未以系統 服務單元 啟動（需要管理員權限 + 已隔離）— 改用 pidfile", "n0950": "未偵測到 pam_google_authenticator — 套件管理 安裝 libpam-google-authenticator", "n0951": "未啟用 雙重驗證", "n0952": "已僅匯出控制面摘要（未同步 Nginx）", "n0953": "未套用到系統 nginx（需 系統變更權限 與管理員權限）— 狀態：已寫入", "n0954": "未套用到系統：需 系統變更權限 與管理員權限", "n0955": "未安裝 redis-cli 客戶端", "n0956": "未寫入任何檔案", "n0957": "未對系統產生可驗證變更 — 不會標 成功", "n0958": "未找到 postgresql conf.d — 設定只寫在面板資料目錄；不會假裝已套用系統", "n0959": "未找到 secrets/ssh/.master.key 且無 YSK_SECRETS_KEY — 目標機可能無法解密 vault/雙重驗證", "n0960": "未授權", "n0961": "未探測", "n0962": "未登記 certbot/LE 續期 定時工作（可用系統 certbot.timer）", "n0963": "未發布 nginx 設定檔", "n0964": "未知 passkey", "n0965": "未知 source（系統日誌:… / 檔案:… / project:…）", "n0966": "未知的資源類型", "n0967": "未知軟件", "n0968": "未知軟件 識別碼", "n0969": "未知軟件項目", "n0970": "未知電源動作", "n0971": "未確認維護窗，拒絕打包（避免熱 匯出 不一致）", "n0972": "未綁專案 主目錄 — 僅寫入控制面 ftps/ssh；需 sshd Match 才生效", "n0973": "未能套用更新：請設 YSK_SOURCE_ROOT 指向 git 工作目錄，或 publish npm 套件後設 YSK_NPM_PACKAGE", "n0974": "未能確認遠端最新版 — 不會假裝「已是最新」", "n0975": "未能確認遠端最新版 — 不會假裝已是最新", "n0976": "未裝 City Lite — 僅國家／ASN；更新庫可下載 DB-IP（免費 CC BY）", "n0977": "未裝 City Lite — 無省／市；請更新庫（免費 DB-IP）", "n0978": "未複製到 /etc/nginx（非 管理員 或未 執行）— managed 設定檔 已在 dataDir", "n0979": "未設定 CF_API_TOKEN — 無法呼叫 Cloudflare 介面", "n0980": "未設定 Cloudflare 介面 權杖 — 僅 預覽試行", "n0981": "未設定磁碟配額（軟配額關閉）", "n0982": "操作完成", "n0983": "未請求安裝到系統（installSystem=否）", "n0984": "未開啟 系統變更權限", "n0985": "未開啟系統變更權限（僅寫入控制面設定）", "n0986": "未開啟系統變更：無法執行 dnssec-keygen", "n0987": "未附密碼 — 僅驗證 電郵（外掛需另行登入）", "n0988": "未驗證／重載：伺服器未開啟系統變更權限（僅寫入管理檔）", "n0989": "本地 設定檔 缺失，請先 計劃", "n0990": "本地備份檔不存在", "n0991": "本地尚無 zone 檔", "n0992": "本地無憑證檔（或從未上傳）", "n0993": "本地部分無效", "n0994": "本小時封禁次數達上限 — 到防護中心檢查", "n0995": "本機 ip 可能不支援 -j；請升級 iproute2（目前僅 notes）", "n0996": "本機 nginx -t 成功（僅控制面 managed 設定檔，≠ 邊緣 已套用）", "n0997": "本機 wsrep 尚可，但 size 未達全部登記節點", "n0998": "本機 ysk.json 無法讀取 / 無 fingerprint", "n0999": "本機指標 成功；完整 healthy 需 對等節點 探測（未做）", "n1000": "本機無 nginx — 設定檔 已寫入，未 重新載入", "n1001": "本機無可用 NM 連線；不會假成功。可改用「僅即時」或啟用 NetworkManager。", "n1002": "本機無可用 ps — 無法列出進程（不假空表當健康）", "n1003": "本機無對應 NM 連線；不會假成功。可改「僅即時」或啟用 NetworkManager。", "n1004": "本輪無可 封鎖 對象", "n1005": "查詢名稱無效", "n1006": "查詢服務狀態", "n1007": "根分割使用率超過 90%", "n1008": "根目錄無效", "n1009": "根磁碟空間", "n1010": "概覽", "n1011": "標準庫 TcpListener（無額外 crate）；Cargo.toml", "n1012": "標準庫 net/http；go.mod；/ 與 /health", "n1013": "模式：可生產", "modeProductionCapable": "可生產", "modeDegraded": "降級", "n1014": "模擬執行：未實際複製", "n1015": "預覽試行完成 — 未複製、未重新載入（正式同步請關閉預覽試行）", "n1016": "預覽試行完成 — 正式同步需管理員權限與系統變更權限", "n1017": "檔名須以 .設定檔 結尾", "n1018": "檔名須以 .sieve 結尾", "n1019": "檔案", "n1020": "檔案上傳與 POST 體積", "n1021": "檔案不存在或不可讀", "n1022": "檔案不存在或已刪除", "n1023": "檢查佔用行程；見主機指標", "n1024": "檢查檔案變更", "n1025": "檢查間隔（秒）", "n1026": "檢查點逾時", "n1027": "檢視者為唯讀，無法執行寫入", "n1028": "權限模式須為 3–4 位八進制數字", "n1029": "權限與安全", "n1030": "正常", "n1031": "正常營運預設", "n1032": "正式環境請改 SECRET_KEY／DEBUG 並配置資料庫", "n1033": "此 planner 僅支援 mariadb + mariadb-galera", "n1034": "此 planner 僅支援 mysql + mysql-從節點", "n1035": "此主機無 系統服務 服務管理", "n1036": "此專案是 節點 運行時，請使用 節點 部署", "n1037": "此專案是 節點 運行時，請使用 節點 部署（或改 運行時 為 static）", "n1038": "此更新需人工確認（高風險／需審批）。請勾選確認後再套用。", "n1039": "此清單為站外待辦（DNS 供應商／IP 擁有者）；控制面無法代勞 PTR／解封 25", "n1040": "此資源不支援套用到系統", "n1041": "此軟件無 套件管理 套件定義", "n1042": "每一列一個設定；記憶體、執行時間、輸入限制", "n1043": "每個專案以獨立 Linux 用戶／群組運作", "n1044": "每小時 auto-封鎖 上限", "n1045": "每日（IPinfo Lite）", "n1046": "永久 封鎖", "n1047": "沒有 邊緣 節點 — 請先於 CDN 頁登記至少一個 邊緣", "n1048": "沒有可套用的真實升級（缺 candidate 或與目前版本相同）", "n1049": "沒有專案可做 Restic 增量", "n1050": "沒有專案可備份（0 個）— 不視為失敗", "n1051": "沙箱指令不可為空", "n1052": "清理日誌／備份；見主機設定儲存", "n1053": "清空防火牆規則 — 預設拒絕", "n1054": "測試寄信需要寄件者與收件者", "n1055": "準備建立系統用戶…", "n1056": "瀏覽器開啟站點完成 WP 安裝精靈", "n1057": "無 .zone 檔可推", "n1058": "無 HostExecutor — 請手動 變更擁有者 檔案", "n1059": "無 HostExecutor — 跳過 變更擁有者（請手動 變更擁有者）", "n1060": "無 IP 可寫入 DNS", "n1061": "無 NM 連線可改；僅刪即時地址", "n1062": "無 NM 連線可改；僅刪即時路由", "n1063": "無 Redis 實例需 匯出", "n1064": "無 SQL 資料庫需 匯出", "n1065": "無 遠端登入 目標", "n1066": "無 遠端登入／機群 目標", "n1067": "無 access 日誌 cache 狀態、亦無 cache 目錄 — hit-rate 未知（請開 log_format 或先 套用 邊緣）", "n1068": "無 access=機群 且填了 fleetAgentId 的成員", "n1069": "無 access=ssh 的成員 — 請在 建立 時用 :ssh 或改 members", "n1070": "無 apply_status", "n1071": "無 套件管理-get", "n1072": "無 authentication challenge", "n1073": "無 bind_ip 需清理", "n1074": "無 dataDir — 只更新資料庫", "n1075": "無 網域 vacation.sieve — 略過 per-mailbox 複製", "n1076": "無 邊緣 可套用（皆 skip/drain）— 控制面 設定檔 仍 已寫入", "n1077": "無 galera_new_cluster；已 重新啟動 mariadb", "n1078": "無 home_dir", "n1079": "無 安裝 記錄 — 庫狀態改為 stored", "n1080": "無 linuxUser", "n1081": "無 主節點 金鑰 / YSK_SECRETS_KEY", "n1082": "無 nameserver（可能未配置）", "n1083": "無 rdbRelPath", "n1084": "無 registration challenge", "n1085": "無 ssh 對等節點", "n1086": "無 ssh 對等節點 可推", "n1087": "無 sshpass（僅能用 金鑰/代理 登入）", "n1088": "無 vacation.sieve 可部署", "n1089": "無 vhost 需要更新（或 設定檔 尚無 伺服器 塊）", "n1090": "無 wsrep 狀態（可能未裝 Galera 或服務未開）", "n1091": "無作用中 jail 或 fail2ban 未運行", "n1092": "無匹配檔名的日誌", "n1093": "無可執行系統步驟（仍只是 已寫入）", "n1094": "無可探活目標（無 healthUrl / baseUrl / publicIpv4）", "n1095": "無可用 access 日誌 行（或格式不符）", "n1096": "無可用 access 日誌（仍可用手動 / 自動 封鎖）", "n1097": "無可用 access／auth 日誌 樣本", "n1098": "無可用 邊緣 IP — 不修改 DNS（保留既有 managed 記錄）", "n1099": "無可用 strict 用戶（全部是救援或未登記）", "n1100": "無效 設定檔 名稱", "n1101": "無效 export 識別碼", "n1102": "無效 export 檔名", "n1103": "無效 linux_user", "n1104": "無效 public 金鑰", "n1105": "無效 快照 識別碼", "n1106": "無效 權杖", "n1107": "無效 服務單元", "n1108": "無效 服務單元 名稱", "n1109": "無效 清理-size（例：500M）", "n1110": "無效 清理-time（例：7d）", "n1111": "無效備份", "n1112": "無效備份格式", "n1113": "無效埠", "n1114": "無效的 金鑰 名稱", "n1115": "無效的 projectId", "n1116": "無效的備份檔名", "n1117": "無效的搜尋 pattern", "n1118": "無效規則編號", "n1119": "無效資料庫名", "n1120": "無暫停域名 — map 為空（系統套用後會 postmap 空檔）", "n1121": "無有效 IP", "n1122": "無模組時政策仍可用於嫌疑人 auto-封鎖 enrich", "n1123": "無法封鎖到主機：未開啟系統變更權限。面板清單沒有新增。", "n1124": "無法 匯出 Redis：缺 redis-cli", "n1125": "無法 匯出：伺服器未開啟系統變更權限", "n1126": "無法 fan-out：未開啟系統變更權限", "n1127": "無法 匯入：伺服器未開啟系統變更權限", "n1128": "無法 列表：未開啟系統變更權限", "n1129": "無法 探測 DNS 叢集：未開啟系統變更權限", "n1130": "無法 探測：未開啟系統變更權限（遠端登入 需 執行）", "n1131": "無法 清除 cache：未開啟系統變更權限（系統變更權限）", "n1132": "無法 清除：未開啟系統變更權限", "n1133": "無法 remote 重新載入：未開啟系統變更權限", "n1134": "無法 Restic：未開啟系統變更權限", "n1135": "無法 還原：未開啟系統變更權限", "n1136": "無法 安全複製：需 系統變更權限已開啟", "n1137": "無法 stat 主目錄", "n1138": "無法 symlink：未開啟系統變更權限", "n1139": "無法 unban：未開啟系統變更權限", "n1140": "無法 unban：需 系統變更權限", "n1141": "無法下載 Adminer：未開啟系統變更權限", "n1142": "無法下載 WordPress：伺服器未開啟系統變更權限", "n1143": "無法使用 PM2，改用本機行程管理", "n1144": "無法停服：未開啟 系統變更權限", "n1145": "無法停止 PM2：伺服器未開啟系統變更權限", "n1146": "無法分發 SSL：未開啟系統變更權限", "n1147": "同步已封鎖：需系統變更權限", "n1148": "無法同步到系統 Nginx：需要系統變更權限", "n1149": "無法啟動 PM2：伺服器未開啟系統變更權限", "n1150": "無法啟用 Apache 站點：需要系統變更權限", "n1151": "無法啟用 NTP：需要系統變更權限與管理員權限", "n1152": "無法啟用 PHP-FPM：需要系統管理員權限", "n1153": "無法啟用 系統服務 服務（請確認權限）", "n1154": "無法啟用 系統服務 服務：需要系統管理員權限", "n1155": "無法啟用服務：需要系統管理員權限", "n1156": "無法在目標安裝 同步複製，且目標原本也沒有 同步複製", "n1157": "無法在系統建立帳號：需要 系統變更權限 與管理員權限；已登記控制面（已寫入/已封鎖）", "n1158": "無法執行 certbot：未開啟系統變更權限", "n1159": "無法執行電源操作：需要系統變更權限（系統變更權限）與管理員權限", "n1160": "無法套用到系統：需要 系統變更權限 與管理員權限", "n1161": "無法套用系統中繼設定：需要系統變更權限", "n1162": "無法套用：計劃失敗", "n1163": "無法安裝 PowerDNS：需要系統管理員權限", "n1164": "無法安裝到 /etc/ssh：需要 系統變更權限 與管理員權限", "n1165": "無法安裝到系統：伺服器未開啟系統變更權限（僅寫入管理檔）", "n1166": "無法寄送測試信：伺服器未開啟系統變更權限或未安裝郵件服務", "n1167": "無法建立 virtual 用戶 資料庫（缺 db_load）", "n1168": "無法建立帳戶資料庫，登入可能失敗", "n1169": "無法建立系統郵件用戶：需要系統管理員權限", "n1170": "無法從 npm 或 GitHub 取得最新版本（未假裝已是最新）", "n1171": "無法探測 系統控制", "n1172": "無法推送 DNS 叢集：未開啟系統變更權限", "n1173": "無法推送遠端：未開啟系統變更權限（本地備份仍成功）", "n1174": "無法收集 metrics", "n1175": "無法清除佇列：伺服器未開啟系統變更權限", "n1176": "無法準備 ACME：未開啟系統變更權限", "n1177": "無法產生 crypt 密碼雜湊（需要 openssl passwd）", "n1178": "無法立即執行：伺服器未開啟系統變更權限", "n1179": "無法統計 Tasks（ps state 失敗）", "n1180": "無法複製 zone 檔到 dnssec 目錄", "n1181": "無法計算 ysk.json fingerprint", "n1182": "無法讀 /etc/resolv.conf", "n1183": "無法讀取 cmdline（進程可能已結束或無權限）", "n1184": "無法讀取 numbered 規則", "n1185": "無法讀取 statfs", "n1186": "無法讀取佇列：伺服器未開啟系統變更權限", "n1187": "無法讀取用戶庫以檢查 雙重驗證", "n1188": "無法讀取目標磁碟空間", "n1189": "無法變更 UFW：需 系統變更權限已開啟", "n1190": "無法變更主機名稱／時區：需要系統變更權限與管理員權限", "n1191": "無法變更網絡：需要系統變更權限（系統變更權限）與管理員權限", "n1192": "無法載入 PowerDNS zone：伺服器未開啟系統變更權限", "n1193": "無法辨識 IPv4/IPv6", "n1194": "無法連線 127.0.0.1:6379", "n1195": "無法連線目標機", "n1196": "無登記紀錄", "n1197": "無硬阻擋項（仍可能有建議項）", "n1198": "無臨時金鑰目錄", "n1199": "無過期臨時用戶", "n1200": "無郵箱 — 跳過系統 sieve 部署", "n1201": "無需建立遠端目錄", "n1202": "熔斷", "n1203": "片段已寫入 dataDir/security/fail2ban（未自動裝到 /etc）", "n1204": "片段已複製；請修正後手動 重新載入", "n1205": "狀態 draft — 請到 FTP 服務頁「套用」才會寫入 vsftpd", "n1206": "狀態與版本", "n1207": "狀態：", "n1208": "狀態：已套用（anvil + per-sender policy + maps）", "n1209": "狀態：已套用（symlink + config plugins[] 已啟用）", "n1210": "狀態：已套用（安全目錄）", "n1211": "狀態：已套用（已覆寫 homeDir）", "n1212": "狀態：已套用（系統命令成功）", "n1213": "狀態：已套用（金鑰+簽署本地 zone；非 registrar 上線）", "n1214": "狀態：已封鎖 — 管理檔已寫；未改 Postfix/Dovecot", "n1215": "狀態：已封鎖（placeholder 已寫入）", "n1216": "狀態：已封鎖（policy daemon 已生成；系統套用需 執行與管理員權限）", "n1217": "狀態：executed ≠ 已上線，直到 certbot 完成且 重新載入", "n1218": "狀態：失敗（nginx -t 或 重新載入 失敗）", "n1219": "狀態：partial — 不會標 已套用（避免假成功）", "n1220": "狀態：partial — 部分系統步驟失敗", "n1221": "狀態：partial（symlink 成功；config 需手動加 plugins）— 不會標成完整 已套用", "n1222": "狀態：preview only", "n1223": "狀態：已寫入/partial（系統複製／重新載入／驗證未完全成功）", "n1224": "狀態：已寫入/partial（關鍵步驟失敗 — 不標 已套用）", "n1225": "狀態：已寫入（套用=否；未套用到系統）", "n1226": "狀態：已寫入（已封鎖 system 套用）", "n1227": "狀態：已寫入（設定檔 已寫；重新載入 已封鎖）", "n1228": "狀態：已寫入（控制面）— 遠端 邊緣 尚未套用；PR-C3 才 fan-out + nginx -t/重新載入", "n1229": "狀態：已寫入（未套用到系統 Postfix/Rspamd）", "n1230": "狀態：已寫入（未複製到系統 Nginx；設 applySystem 才會 try 重新載入）", "n1231": "狀態：已寫入（管理白名單已存；live fail2ban-客戶端 需 系統變更權限，或「策略→套用到系統」重寫 jail.local）", "n1232": "狀態：已寫入（金鑰/DS 已有；zone 未簽署或未找 zone 檔）", "n1233": "狀態：已寫入（非已上線 SSO）", "n1234": "狀態：已寫入（非已簽署／非已上線）— 不假成功", "n1235": "狀態：已寫入（預覽／只寫管理檔）", "n1236": "狀態：已寫入並成功 重新載入 本機 nameserver", "n1237": "狀態：已寫入管理 zone 檔（尚未成為權威 DNS，除非你已 重新載入 nameserver）", "n1238": "狀態：已寫入管理檔（未套用到系統）", "n1239": "狀態：無資料（非假統計）", "n1240": "獨立 TOTP（與 面板 operator 雙重驗證 分開）", "n1241": "獨立於 面板 operator 雙重驗證", "n1242": "生命週期", "n1243": "生產可關並手動重載", "n1244": "生產環境請關閉", "n1245": "生產門檻：尚未完全達標，請查看下方缺項", "n1246": "生產門檻：通過（權限、Nginx、節點 就緒）", "n1247": "生產隔離：到專案「隔離」建立 Linux 用戶與 主目錄", "n1248": "用戶名 2–32 字元 [a-z0-9._-]", "n1249": "申請 SSL 需要域名與電郵", "n1250": "留空不限制；多路徑用 : 分隔", "n1251": "留空用系統預設；可填絕對路徑", "n1252": "略過", "n1253": "略過 DNS 解析", "n1254": "略過 變更擁有者（未以 管理員 隔離模式執行）", "n1255": "略過 變更擁有者（需 系統變更權限 與管理員權限）— 檔案可能為控制面用戶擁有", "n1256": "略過 draining 節點", "n1257": "略過 重新載入：zone 驗證失敗", "n1258": "略過 remote 重新載入（重新載入=否）— 已寫入 ≠ 已套用", "n1259": "略過 usermod（未 os_provisioned）", "n1260": "略過 zone 套用（applyZone=否）— 僅更新控制面 records", "n1261": "略過無效用戶名", "n1262": "疑似 DDoS — 降級運作", "n1263": "白名單 IP：拒絕封禁", "n1264": "白名單：略過", "n1265": "監控 IP／域名聲譽並暖機", "n1266": "監聽 IP；建議 127.0.0.1 僅本機", "n1267": "監聽位址", "n1268": "目前以本機行程模式部署", "n1269": "目前以簡易 PHP 模式部署", "n1270": "目前權限讀不到防火牆狀態（非攻擊）", "n1271": "目前非系統管理員權限，部分系統設定無法套用", "n1272": "目標 ysk.json 校驗失敗", "n1273": "目標尚無 ysk-server 命令列 — 請確認 初始化 或手動 npm i -g ysk-server", "n1274": "目標已有 YSK 資料，已確認 forceWipeTarget", "n1275": "目標有 同步複製", "n1276": "目標為 管理員", "n1277": "目標用戶已暫停", "n1278": "目標缺 同步複製（將在 初始化 安裝）", "n1279": "目標認證需要 sshpass（未安裝）", "n1280": "目標預檢失敗", "n1281": "目標預檢未通過", "n1282": "目標預檢通過", "n1283": "目的地必須以 .zip 結尾", "n1284": "真正推送需 執行 + 系統變更權限已開啟", "n1285": "短標籤 7 日）— 建議立即更新", "n1449": "資料庫尚未建立。請確認 mysql 客戶端與 系統變更權限已開啟 後再試。", "n1450": "資料庫尚未建立。請確認 psql、TCP 與 系統變更權限已開啟 後再試。", "n1451": "資料庫數量", "n1452": "資料庫缺 名稱", "n1453": "資料庫轉儲需另行納入", "n1454": "資料目錄", "n1455": "隔離分頁：建立／遷移系統用戶", "n1456": "資源限制", "n1457": "超過閾值", "n1458": "路徑不允許", "n1459": "路徑不在已允許的額外 日誌 目錄", "n1460": "路徑越界拒絕", "n1461": "跳過", "n1462": "跳過刪舊 主目錄：目標 canonical 內容未完成整", "n1463": "軟配額已存；硬 setquota 請「套用限制到 OS」", "n1464": "輸入巢狀層級", "n1465": "輸入資料無效", "n1466": "逗號分隔；過嚴可能弄壞套件", "n1467": "通常為 RAM 25%", "n1468": "連線與網絡", "n1469": "進程仍在（可再送 KILL）", "n1470": "進程已結束（kill -0 失敗）", "n1471": "進階", "n1472": "進階：secret 來自 面板（與 operator 雙重驗證 同源 — 風險自負）", "n1473": "運維", "n1474": "遠端 SFTP 設定未完成整（主機/username/路徑）", "n1475": "遠端 已套用 ≠ 叢集 healthy — 請跑 探測 --peers", "n1476": "遠端 migrate post 失敗", "n1477": "遠端 mkdir 失敗", "n1478": "遠端 post 回報 成功=否", "n1479": "遠端備份未啟用（略過推送）", "n1480": "遠端安裝需 系統變更權限已開啟", "n1481": "遠端找不到 rndc / active named|bind9|pdns", "n1482": "遠端推送或 Restic 有失敗 — 本地 封存 可能已成功，請看 sideResults", "n1483": "遠端檔案、暴露資訊、函式禁用", "n1484": "遠端無 active named/bind9/pdns（仍可 安全複製 檔案）", "n1485": "遠端無 nginx — 設定檔 已 安全複製（已寫入 on 對等節點）", "n1486": "遠端／Restic 步驟已處理", "n1487": "遷移需要 系統變更權限 與管理員權限", "n1488": "還原後未 變更擁有者（需 管理員權限與系統變更權限）", "n1489": "部分 DNSBL 未必完整支援 IPv6；結果僅供參考", "n1490": "部分 對等節點 已套用；其餘僅 已寫入 或失敗 — 勿當全叢集已 重新載入", "n1491": "部分 對等節點 重新載入 成功（partial）", "n1492": "部分或全部失敗 — 請查看 results", "n1493": "部分或全部未套用到系統（需 系統變更權限）", "n1494": "部分推送失敗 — 檢查 遠端登入金鑰 / 防火牆", "n1495": "部分步驟失敗 — 見 steps", "n1496": "部分系統步驟失敗", "n1497": "部署", "n1498": "部署 PHP + 發布 Nginx（文件根 app/public）", "n1499": "部署時可覆寫", "n1500": "部署會 go 建置 -o app .；需主機已安裝 Go toolchain", "n1501": "部署會執行 venv + pip；ExecStart 使用 uvicorn main:app", "n1502": "部署會執行 venv + pip；entry 預設 app.py（非 ASGI）", "n1503": "部署／套用 FPM 程序池 時寫入 php_admin_value", "n1504": "部署：面板「部署」會啟動 伺服器.js；已寫入 ≠ 已對外", "n1505": "郵件主機 A 記錄", "n1506": "郵件主機 AAAA 記錄（IPv6）", "n1507": "郵件管理設定目錄", "n1508": "郵箱 識別碼 無效", "n1509": "郵箱本地部分無效", "n1510": "配額須為 1–1000000 MiB", "n1511": "配額須至少 1 MiB", "n1512": "重啟系統服務", "n1513": "重複被 封鎖 再加重", "n1514": "重載 vsftpd", "n1515": "重載網頁服務", "n1516": "錯誤報告等級", "n1517": "錯誤日誌、慢查詢", "n1518": "錯誤與日誌", "n1519": "門檻數字", "n1520": "開啟會嚴重影響效能", "n1521": "閒置逾時（秒）", "n1522": "關閉", "n1523": "防火牆建議（不自動改 UFW 除非套用系統）", "n1524": "防火牆（內網）：TCP 3306, 4567, 4444, 4568", "n1525": "防護檔寫入 nginx limit_req", "n1526": "防護檔維持期（hold）中，暫不降檔", "n1527": "防護：危急", "n1528": "防護：建議緊急檔", "n1529": "防護：疑似受攻擊", "n1530": "限制已寫入控制面；套用到 OS 需 系統變更權限 與管理員權限", "n1531": "限速", "n1532": "限速越界", "n1533": "限速／反垃圾旗標已存 資料庫；要進 Postfix/Rspamd 請用「套用限速/反垃圾到系統」", "n1534": "隔離模式：degraded — 建置／行程可能以控制面用戶執行；生產請建立系統用戶", "n1535": "隔離模式：degraded — 行程可能以控制面用戶執行；生產請 管理員權限與系統變更權限 並建立系統用戶", "n1536": "離線保存；含 TOTP secret。遺失 Authenticator 時可手動重建。", "n1537": "需 執行 與管理員權限 先可自動 清理", "n1538": "需 NetworkManager active 才能持久改 DNS（不會盲寫 /etc/resolv.conf）", "n1539": "需 系統變更權限 先可 ufw 套用", "n1540": "需 系統變更權限 才會真正 auto-封鎖", "n1541": "需 系統變更權限 才能 banip", "n1542": "需 系統變更權限 才能控制 fail2ban 服務", "n1543": "需 系統變更權限已開啟 先可 清理 系統日誌", "n1544": "需 執行:是 或 dryRun:是", "n1545": "需 nginx log_format 含 $upstream_cache_status（或 X-YSK-Cache）先有 HIT/MISS", "n1546": "需 管理員權限與系統變更權限 才會真正 useradd；控制面不會假裝成功", "n1547": "需 root 先可 journalctl --vacuum", "n1548": "需要管理員權限 先可改 UFW", "n1549": "需主機已安裝 cargo／rustc", "n1550": "需主機有 Python 與外網 pip", "n1551": "需主機有 Python 與外網 pip（否則安裝依賴會失敗）", "n1552": "需安裝 bind9-dnsutils 並開啟系統變更權限，才可真正執行 dnssec-keygen。", "n1553": "需確認字串 EMERGENCY；防鎖死自己", "n1554": "需系統 sshd Match/用戶 設定才會真正生效", "n1555": "需要 --目標 或可 resume 的 --job", "n1556": "需要 MySQL／MariaDB 管理員權限", "n1557": "需要 系統變更權限", "n1558": "需要 系統變更權限 下載 Adminer", "n1559": "需要 管理員", "n1560": "需要 aws 命令列（或改用 Restic s3 儲存庫）", "n1561": "需要 識別碼 或 all", "n1562": "需要 ip", "n1563": "需要 jobId", "n1564": "需要 linuxUser 或 projectId", "n1565": "需要 主節點 節點", "n1566": "需要 nginx geoip2 模組（libnginx-mod-http-geoip2）先會在 HTTP 層生效", "n1567": "需要 主節點 節點", "n1568": "需要 privateKey", "n1569": "需要 projectId", "n1570": "需要 管理員", "n1571": "需要 source", "n1572": "需要 sshpass、YSK 身份金鑰（identityId），或本機預設 遠端登入金鑰", "n1573": "需要 目標（管理員@主機）或 jobId 以 resume", "n1574": "需要 目標，或含 目標 的 jobId", "n1575": "需要 username 與 ssh- 開頭公鑰", "n1576": "需要 zone 域名", "n1577": "需要密碼", "n1578": "需要有效 電郵", "n1579": "需要有效 電郵 與 網域", "n1580": "需要目前版本與最新版本", "n1581": "需要真實 candidateVersion（不可等於 current 或缺省）", "n1582": "需要系統管理員權限才能完成安裝", "n1583": "需要系統管理員權限才能變更服務", "n1584": "需要系統變更權限才能同步/重載", "n1585": "需要系統變更權限才能同步到系統並重載 Nginx", "n1586": "需要系統變更權限才能掛 check_policy_service", "n1587": "需要系統變更權限才能複製 nginx 設定檔 並 重新載入", "n1588": "同步已封鎖：需管理員權限", "n1589": "需要至少一個 主節點 節點", "n1590": "靜態網站", "n1591": "非 管理員 — useradd／系統服務／nginx 系統路徑受限", "n1592": "非受限 seccomp 需要明確指定 runAsUser", "n1593": "公開請求／分鐘", "n1594": "面板連線即將中斷；可用「取消排程」撤回（若仍在線）", "n1595": "面板非 管理員", "n1596": "預覽可用 套用:否", "n1597": "預覽模式 — 未寫入任何檔案", "n1598": "預設 uvicorn workers", "n1599": "預設以 Redis 邏輯 資料庫 編號隔離", "n1600": "預設字元集", "n1601": "預設驗證外掛", "n1602": "額外日誌路徑無效", "n1603": "顯示啟動錯誤", "n1604": "顯示錯誤、記錄與報告等級", "n1605": "顯示錯誤（畫面）", "n1606": "首次 建置 可能數分鐘；失敗時見 notes／日誌", "n1607": "驗證", "n1608": "驗證碼無效", "n1609": "驗證通過", "n1610": "未重新整理套件索引（未開 系統變更權限）— 僅顯示 套件管理 列表；開 執行 先跑 套件管理-get update", "n1611": "UFW 已關閉：user.rules 有 {{n}} 條永久拒規則，但核心未強制執行。", "n1612": "UFW 已關閉。拒絕規則只會寫入 user.rules，核心不會丟棄封包。請先啟用 UFW。不會自動開啟。", "t0001": "listenPort 無效：{{v0}}", "t0002": "已還原版本 {{v0}}", "t0003": "檔案過大（>{{v0}} bytes）", "t0004": "已存在：{{v0}}", "t0005": "目標已存在：{{v0}}", "t0006": "找不到：{{v0}}", "t0007": "壓縮失敗： {{v0}}", "t0008": "已壓縮 {{v0}} 項 → {{v1}}", "t0009": "找不到：{{v0}}", "t0010": "un壓縮失敗： {{v0}}", "t0011": "已解壓 {{v0}} → {{v1}}", "t0012": "無法從狀態 {{v0}} 標記為已執行", "t0013": "此操作需要人工審批：{{v0}}", "t0014": "審批狀態無效：{{v0}}", "t0015": "審批已是 {{v0}}", "t0016": "未知角色：{{v0}}", "t0017": "角色 {{v0}} 無法執行 {{v1}}（上限 {{v2}}）", "t0018": "{{v0}} 範圍的非讀取操作需要指定 識別碼", "t0019": "工具無主機執行器：{{v0}}", "t0020": "工具不在允許清單：{{v0}}", "t0021": "工具已明確拒絕：{{v0}}", "t0022": "找不到 Playbook：{{v0}}", "t0023": "ip -j addr 失敗：{{v0}}", "t0024": "ip -j route 失敗：{{v0}}", "t0025": "nmcli 寫入地址失敗：{{v0}}", "t0026": "已保存 {{v0}} → 連線「{{v1}}」", "t0027": "connection up 警告：{{v0}}", "t0028": "已重新啟用連線（重開仍在）", "t0029": "已新增 {{v0}} → {{v1}}（即時；重開可能消失）", "t0030": "已從連線「{{v0}}」移除 {{v1}}", "t0031": "NM 移除地址：{{v0}}", "t0032": "已刪除即時 {{v0}} ← {{v1}}", "t0033": "link down 失敗：{{v0}}", "t0034": "已 down {{v0}}", "t0035": "link up 失敗：{{v0}}", "t0036": "已 up {{v0}}", "t0037": "設 MTU 失敗：{{v0}}", "t0038": "nmcli 寫入 gateway 失敗：{{v0}}", "t0039": "已保存 預設 gateway {{v0}} → 連線「{{v1}}」（重開仍在）", "t0040": "nmcli 寫入 routes 失敗：{{v0}}", "t0041": "已保存靜態路由 {{v0}} →「{{v1}}」（重開仍在）", "t0042": "ip route add 失敗：{{v0}}", "t0043": "已加即時路由 {{v0}}${gw ?", "t0044": ": ''}（重開可能消失；要持久請用「保存」）", "t0045": "已從連線「{{v0}}」清除 ipv4.gateway", "t0046": "NM 清除 gateway：{{v0}}", "t0047": "已從「{{v0}}」移除路由 {{v1}}", "t0048": "NM 移除 routes：{{v0}}", "t0049": "ip route del 失敗：{{v0}}", "t0050": "已刪即時路由 {{v0}}", "t0051": "已刪路由 {{v0}}", "t0052": "DNS 無效：{{v0}}", "t0053": "DNS 不是合法 IP：{{v0}}", "t0054": "nmcli modify 失敗：{{v0}}", "t0055": "已還原 {{v0}} 使用 DHCP DNS（ignore-auto-dns=no）", "t0056": "nmcli modify 失敗：{{v0}}", "t0057": "已寫入 {{v0}}：DNS {{v1}}${search.length ?", "t0058": "解析失敗：{{v0}}", "t0059": "{{v0}} → {{v1}} 筆", "t0060": "{{v0}} 無結果", "t0061": "已簽發一次性 SSO 權杖（{{v0}} 分鐘）", "t0062": "Webmail 下載安裝失敗：{{v0}}", "t0063": "已部署至 {{v0}}", "t0064": "系統部署失敗：{{v0}}", "t0065": "已複製 vacation 到 {{v0}} 個郵箱 sieve 目錄（已寫入）", "t0066": "已部署 sieve + .dovecot.sieve → {{v0}}@{{v1}}", "t0067": "已停用 active sieve link → {{v0}}@{{v1}}", "t0068": "{{v0}}@{{v1}} sieve 部署失敗: {{v2}}", "t0069": "已寫 per-sender policy daemon（{{v0}} domains）", "t0070": "{{v0}} 失敗 (結束 {{v1}}): {{v2}}", "t0071": "已寫入 plugin 骨架 {{v0}}", "t0072": "symlink 失敗: {{v0}}", "t0073": "已 symlink {{v0}} → {{v1}}", "t0074": "改 config 失敗: {{v0}}", "t0075": "config 已包含 plugin {{v0}}: {{v1}}", "t0076": "已寫入 {{v0}}: {{v1}}", "t0077": "將 {{v0}} 與 www.{{v1}} 指到伺服器公開 IP。CDN（Cloudflare）可灰雲或橙雲。", "t0078": "PTR 須由 VPS／雲端 IP 擁有者設定，並與 HELO/EHLO（{{v0}}）一致。請於供應商控制台申請（AWS/GCP 常需工單）。", "t0079": "佇列 {{v0}} 封", "t0080": "postsuper 失敗: {{v0}}", "t0081": "域名已登記：{{v0}}", "t0082": "郵箱已存在：{{v0}}", "t0083": "已建立 Maildir：{{v0}}", "t0084": "已建立系統用戶 {{v0}}", "t0085": "建立系統用戶失敗：{{v0}}", "t0086": "虛擬郵箱對應：{{v0}}", "t0087": "寫入 passdb 失敗：{{v0}}", "t0088": "來源已存在: {{v0}}", "t0089": "已建立 {{v0}}: {{v1}} → {{v2}}", "t0090": "找不到郵件域名：{{v0}}", "t0091": "已寫 vacation 草稿 {{v0}}", "t0092": "已寫停用標記 {{v0}}", "t0093": "virtual_alias: {{v0}} ({{v1}} 條)", "t0094": "Postfix anvil: smtpd_client_message_rate_limit={{v0}} / 3600s（全域；取各域名 rate 最小值）", "t0095": "postconf 確認: {{v0}}", "t0096": "已寫 rspamd ratelimit.設定檔（~{{v0}}/h）", "t0097": "已重建聚合 map（{{v0}} domains）", "t0098": "保護模式 {{v0}}：已封鎖遠端模型（僅允許本機 LLM）", "t0099": "LLM 請求失敗：{{v0}}", "t0100": "在 {{v0}}–{{v1}} 範圍內找不到可用埠", "t0101": "請在 confirm 欄位輸入正確字串：{{v0}}", "t0102": "延遲 {{v0}}s 會以最少 1 分鐘排程（shutdown +N 以分鐘計）", "t0103": "已排程重啟（約 {{v0}} 分鐘後）", "t0104": "已排程關機（約 {{v0}} 分鐘後）", "t0105": "讀取失敗：{{v0}}", "t0106": "列出失敗：{{v0}}", "t0107": "服務名稱無效：{{v0}}", "t0108": "路徑不在允許寫入範圍：{{v0}}", "t0109": "清除／重新載入 失敗：{{v0}}", "t0110": "資料庫 {{v0}}：{{v1}} 個 金鑰", "t0111": "(type {{v0}} — 僅顯示類型)", "t0112": "已寫入 {{v0}}", "t0113": "寫入失敗：{{v0}}", "t0114": "金鑰 不存在或未刪除", "t0115": "主目錄 不存在: {{v0}}", "t0116": "無法解析 快照 JSON: {{v0}}", "t0117": "共 {{v0}} 個 Restic 快照", "t0118": "覆寫 主目錄 需 confirmPhrase=\"{{v0}}\"（雙重確認）", "t0119": "預覽試行：快照 {{v0}} 含 {{v1}} 條路徑（最多顯示 100）", "t0120": "預覽試行 失敗: {{v0}}", "t0121": "已還原 快照 {{v0}} → {{v1}}", "t0122": "還原 失敗 結束={{v0}}", "t0123": "已寫入管理片段：{{v0}}", "t0124": "專案 Linux 用戶約 {{v0}} 個（Match 用戶 ysks_*,ysk_*）", "t0125": "請手動：cp {{v0}} /etc/ssh/sshd_config.d/ && 系統控制 重新載入 sshd", "t0126": "sshd -t 失敗，未 重新載入：{{v0}}", "t0127": "已安裝 {{v0}} 並 重新載入 sshd", "t0128": "已安裝片段但 重新載入 失敗：{{v0}}", "t0129": "已寫入控制面摘要 {{v0}}（{{v1}} bytes）", "t0130": "託管 Nginx 設定檔：{{v0}} 個（面板資料目錄 nginx/conf.d）", "t0131": "未知範本：{{v0}}", "t0132": "範本 {{v0}}：{{v1}}", "t0133": "{{v0}} 已存在 — 已略過（force 可覆寫）", "t0134": "WordPress 安裝說明 — {{v0}}", "t0135": "域名：{{v0}}", "t0136": "進程 entry 預設 {{v0}}.wsgi:application（gunicorn）", "t0137": "部署會 cargo 建置 --release；二進位預設 ./目標/release/{{v0}}", "t0138": "Axum 範本：cargo 建置 --release 需外網 crates.io", "t0139": "二進位 ./目標/release/{{v0}}", "t0140": "已建立 {{v0}}、略過 {{v1}}、錯誤 {{v2}}", "t0141": "{{v0}}前必須完成專案 Linux 用戶隔離（資源分頁 → 建立系統用戶）。", "t0142": "預期主目錄：/home/ysk-server-{{v0}} · 用戶：{{v1}}", "t0143": "已 變更擁有者 {{v0}}:{{v1}} → {{v2}}", "t0144": "以專案用戶 {{v0}} 執行指令", "t0145": "pidfile 以 runuser -u {{v0}} 啟動", "t0146": "已寫入 FPM 程序池：{{v0}}", "t0147": "已啟用 程序池：{{v0}}", "t0148": "/etc/php/{{v0}}/fpm 找不到 — 安裝 php{{v1}}-fpm", "t0149": "{{v0}} 已安裝", "t0150": "安裝 {{v0}}", "t0151": "未能安裝 {{v0}}", "t0152": "遠端登入 探測 失敗：{{v0}}", "t0153": "nameserver 活躍：{{v0}}", "t0154": "zone 目錄存在（{{v0}} 個 .zone）", "t0155": "zone 目錄不存在：{{v0}}", "t0156": "remote 重新載入 失敗：{{v0}}", "t0157": "{{v0}}: 安全複製 失敗 {{v1}}", "t0158": "安全複製 {{v0}} 檔 成功 → {{v1}}", "t0159": "安全複製 部分/全部失敗（成功={{v0}} fail={{v1}}）", "t0160": "啟用 失敗：{{v0}}", "t0161": "停用 失敗：{{v0}}", "t0162": "UFW DENY from {{v0}}（永久規則，直至手動刪）", "t0163": "deny 失敗：{{v0}}", "t0164": "已刪 UFW DENY {{v0}}", "t0165": "delete 失敗：{{v0}}", "t0166": "已刪規則 #{{v0}}", "t0167": "刪 #{{v0}} 失敗：{{v1}}", "t0168": "已允許 {{v0}}/{{v1}}", "t0169": "allow 失敗：{{v0}}", "t0170": "重新載入 嘗試失敗 ({{v0}}): {{v1}}", "t0171": "隔離模式：以專案用戶 {{v0}} 運作", "t0172": "使用 節點 執行檔：{{v0}}", "t0173": "目標埠：{{v0}}", "t0174": "已套用面板 節點 調校（{{v0}}）", "t0175": "套用後找不到進入點：{{v0}}", "t0176": "以 系統服務單元 部署：{{v0}}", "t0177": "以 PM2 部署：{{v0}}", "t0178": "啟動行程失敗：{{v0}}", "t0179": "已啟動 pid={{v0}}，pidfile={{v1}}", "t0180": "已發布 Nginx 設定（管理檔）：{{v0}}", "t0181": "已建立佔位頁：{{v0}}", "t0182": "使用既有：{{v0}}", "t0183": "靜態 Nginx 設定：{{v0}}", "t0184": "文件根目錄：{{v0}}", "t0185": "HTTP 基本認證：{{v0}}（{{v1}}）", "t0186": "類型：{{v0}}", "t0187": "整站重新導向 → {{v0}}", "t0188": "使用已上傳憑證：{{v0}}", "t0189": "已啟用 SSL（預設 Let’s Encrypt 路徑；或於 SSL 頁上傳 {{v0}} 憑證）", "t0190": "重載 Nginx 失敗：{{v0}}", "t0191": "已寫入暫停用虛擬主機：{{v0}}", "t0192": "運行時 {{v0}} — 只同步 Git，不重啟行程", "t0193": "已寫入環境變數 {{v0}}（{{v1}} 項）", "t0194": "PHP-FPM 程序池 用戶：{{v0}}（專案隔離）", "t0195": "運行時 版本 → {{v0}}", "t0196": "已合併面板 php.ini（{{v0}} 條 php_admin_*）", "t0197": "PHP-FPM 生產 Nginx 設定：{{v0}}", "t0198": "Nginx 重新載入 結束碼={{v0}}: {{v1}}", "t0199": "PHP 內建伺服器 pid={{v0}} @ 127.0.0.1:{{v1}}", "t0200": "已送 SIGTERM 至 {{v0}}", "t0201": "已送 SIGKILL 至 {{v0}}", "t0202": "pid {{v0}} 已結束", "t0203": "deployProcess 不適用於 運行時「{{v0}}」", "t0204": "隔離模式：以專案用戶 {{v0}} 建置與啟動", "t0205": "運行時：{{v0}} · 埠 {{v1}} · entry {{v2}}", "t0206": "建置：{{v0}}", "t0207": "建置失敗：{{v0}}", "t0208": "已套用面板 {{v0}} 調校（{{v1}}）", "t0209": "已寫入 系統服務 範本：{{v0}}", "t0210": "已 啟用 --now 專案 服務單元（用戶={{v0}}）", "t0211": "系統控制 啟動失敗：{{v0}}", "t0212": "寫入系統 服務單元 失敗：{{v0}}", "t0213": "pidfile 啟動 pid={{v0}}${模式 === 'isolated' ?", "t0214": "pidfile 啟動失敗：{{v0}}", "t0215": "健康檢查未通過（{{v0}}ms）：{{v1}}", "t0216": "健康檢查通過（{{v0}}ms）", "t0217": "已寫入 Nginx 反代：{{v0}}", "t0218": "共 {{v0}} 個 banned IP", "t0219": "已 unban {{v0}} @ {{v1}}", "t0220": "unban 失敗: {{v0}}", "t0221": "管理白名單: {{v0}} ({{v1}} 項)", "t0222": "sshd ignoreip {{v0}} {{v1}} · 狀態：已套用", "t0223": "fail2ban-客戶端 ignoreip 失敗：{{v0}}（管理檔已寫；不假 已套用）", "t0224": "建議 fail2ban jails: {{v0}}", "t0225": "已寫入 服務單元 範本 {{v0}}", "t0226": "尚未 已套用（{{v0}}）", "t0227": "狀態 {{v0}}", "t0228": "資料庫數量：{{v0}}（索引 0–{{v1}}）", "t0229": "已複製到 {{v0}}", "t0230": "無法複製到系統 設定檔 目錄：{{v0}}", "t0231": "複製 設定檔 失敗：{{v0}}", "t0232": "已重啟 {{v0}}", "t0233": "複製到 {{v0}} 失敗：{{v1}}", "t0234": "拒絕額外目錄：{{v0}}", "t0235": "目錄名不合法：{{v0}}", "t0236": "略過預設目錄（已掃描）：{{v0}}", "t0237": "{{v0}}（未產生）", "t0238": "系統日誌 php{{v0}}-fpm（程序池 日誌 未見）", "t0239": "grep「{{v0}}」：{{v1}} 行命中（尾端掃描 {{v2}} bytes）", "t0240": "顯示尾端 {{v0}} 行（檔案 {{v1}} bytes，已截斷）", "t0241": "顯示尾端 {{v0}} 行（檔案 {{v1}} bytes）", "t0242": "找到 {{v0}} 個日誌檔（未指定內容關鍵字）", "t0243": "無法讀取：{{v0}}", "t0244": "內容搜尋「{{v0}}」：掃 {{v1}} 檔、{{v2}} 檔有命中（只掃各檔尾端）", "t0245": "{{v0}} 伺服器尚未安裝", "t0246": "{{v0}} 服務未運行", "t0247": "{{v0}} 客戶端尚未安裝", "t0248": "客戶端：{{v0}}", "t0249": "伺服器：{{v0}}", "t0250": "{{v0}} 已就緒", "t0251": "{{v0}} 安裝未完成", "t0252": "{{v0}} 服務已啟動", "t0253": "啟動失敗：{{v0}}", "t0254": "支援 Node.js 版本 {{v0}}；可用版本：{{v1}}", "t0255": "不支援的 PHP 版本 {{v0}}；可用：{{v1}}", "t0256": "不支援的 Python 版本 {{v0}}；可用：{{v1}}", "t0257": "不支援的 Go 版本 {{v0}}；可用：{{v1}}", "t0258": "未知 運行時：{{v0}}", "t0259": "dig 無答案（NXDOMAIN 或空）", "t0260": "已解析最近 {{v0}} 行", "t0261": "PostgreSQL 失敗: {{v0}}", "t0262": "MySQL 失敗: {{v0}}", "t0263": "{{v0}}: 無法 刪除 — 需 執行與管理員權限（已標記 expired）", "t0264": "{{v0}}: 刪除 失敗 {{v1}}", "t0265": "{{v0}}: 刪除 失敗 {{v1}}", "t0266": "{{v0}}: 已標記 expired（未 刪除 系統帳號）", "t0267": "FTP 用戶已存在: {{v0}}", "t0268": "已建立 FTP 帳戶 {{v0}}", "t0269": "Jail 路徑: {{v0}}", "t0270": "密碼已以 crypt 雜湊儲存（不存明文）", "t0271": "上傳檔將以專案 Linux 用戶擁有：{{v0}}（套用 vsftpd 後生效）", "t0272": "略過無效用戶名", "t0273": "帳戶 {{v0}}：已遷移明文密碼 → crypt 雜湊", "t0274": "帳戶 {{v0}} 雜湊格式非 crypt（openssl 不可用）— 登入可能失敗", "t0275": "帳戶 {{v0}} 無密碼雜湊，無法登入直至重設", "t0276": "帳戶 {{v0}} 綁專案但無 linuxUser — 暫用全域 guest「{{v1}}」（請重建 FTP 帳戶）", "t0277": "已寫入 {{v0}} 個帳戶設定", "t0278": "{{v0}} 個帳戶", "t0279": "帳戶 {{v0}} 已套用，vsftpd 運行中", "t0280": "略過 變更擁有者 {{v0}}：系統用戶「{{v1}}」不存在（請先建立專案系統用戶）", "t0281": "變更擁有者 失敗 {{v0}}：{{v1}}", "t0282": "FTP 專用家目錄（{{v0}}）", "t0283": "專案 {{v0}} 根目錄", "t0284": "專案 {{v0}} public", "t0285": "郵件 {{v0}}", "t0286": "尚未建立系統用戶（需要系統管理員權限）。意圖 主目錄：{{v0}}；目前使用控制面陰影目錄。", "t0287": "{{v0}}；已改用陰影 主目錄 {{v1}}", "t0288": "已嘗試停止 {{v0}}", "t0289": "已移除舊 主目錄：{{v0}}", "t0290": "舊 主目錄 未刪（可手動）：{{v0}} — {{v1}}", "t0291": "拒絕刪除不安全 主目錄 路徑：{{v0}}", "t0292": "未刪 OS 主目錄（需要管理員權限）：{{v0}}；系統用戶 {{v1}} 可能仍存在", "t0293": "pdnsutil load-zone 失敗：{{v0}}", "t0294": "已透過 pdnsutil 載入 zone {{v0}}", "t0295": "系統控制 {{v0}} fail2ban 成功", "t0296": "{{v0}} 失敗：{{v1}}", "t0297": "fail2ban 封鎖 {{v0}} @ {{v1}}（臨時，受 bantime 限制）", "t0298": "banip 失敗：{{v0}}", "t0299": "監獄：{{v0}}", "t0300": "ignoreip 來源：dataDir/fail2ban/ignoreip.txt", "t0301": "安裝檢查：{{v0}}", "t0302": "已達方案專案上限 {{v0}}（套件: {{v1}}）", "t0303": "已達方案信箱上限 {{v0}}（套件: {{v1}}）", "t0304": "已達方案資料庫上限 {{v0}}（套件: {{v1}}）", "t0305": "已寫入 {{v0}}（資料庫 預設 {{v1}}@{{v2}}；可用環境變數覆寫）", "t0306": "pm2 start 失敗：{{v0}}", "t0307": "pm2 已啟動 {{v0}}", "t0308": "{{v0}} 尚未安裝", "t0309": "已執行 {{v0}}", "t0310": "已套用 {{v0}} 項", "t0311": "以下項目可能需重啟：{{v0}}", "t0312": "即時套用 {{v0}} 項", "t0313": "需重啟項（請用生命週期重啟）：{{v0}}", "t0314": "已 ALTER SYSTEM {{v0}} 項並 重新載入", "t0315": "部分參數需重啟後生效：{{v0}}", "t0316": "已 {{v0}} {{v1}}", "t0317": "管理 ini：{{v0}}", "t0318": "/etc/php/{{v0}}/fpm 不存在 — 請先安裝 php{{v1}}-fpm", "t0319": "已套用 {{v0}} 並 重新載入 php{{v1}}-fpm", "t0320": "已複製 ini；重新載入 失敗：{{v0}}", "t0321": "DNS zone draft {{v0}}（需到 DNS 頁寫入/套用）", "t0322": "已含 IPv6 {{v0}}", "t0323": "郵件域名 {{v0}} 已登記", "t0324": "MySQL 資料庫 draft {{v0}}（需到資料庫頁套用）", "t0325": "略過：家目錄不存在 {{v0}}", "t0326": "已備份 {{v0}}/{{v1}} 個專案", "t0327": "（略過 {{v0}} 個無 主目錄）", "t0328": "專案目錄不存在：{{v0}}", "t0329": "封存 失敗：{{v0}}", "t0330": "已寫入備份 {{v0}}", "t0331": "預覽試行：共 {{v0}} 個檔（顯示 {{v1}} 個）", "t0332": "無法列出: {{v0}}", "t0333": "已選擇性還原 (網站) 到 {{v0}}", "t0334": "網站 還原失敗: {{v0}}", "t0335": "還原失敗: {{v0}}", "t0336": "已從 {{v0}} 完整還原到專案目錄", "t0337": "已 變更擁有者 {{v0}}:{{v1}} → {{v2}}", "t0338": "執行: {{v0}}", "t0339": "管理 定時工作表 檔：{{v0}}", "t0340": "定時工作表 失敗: {{v0}}", "t0341": "pg_dump 失敗: {{v0}}", "t0342": "匯出 失敗: {{v0}}", "t0343": "psql 失敗: {{v0}}", "t0344": "匯入 失敗: {{v0}}", "t0345": "目標 {{v0}} 非空且非 git 倉庫 — 拒絕 clone 以免覆寫資料（僅清除帶 .ysk-scaffold 的佔位範本）", "t0346": "已 clone {{v0}} → {{v1}}", "t0347": "已 提取 更新：{{v0}}", "t0348": "linuxUser 無效：{{v0}}", "t0349": "已套用 {{v0}}：{{v1}} + www-data/nginx；主目錄 750、public g+rX", "t0350": "ysk-網站 套用部分失敗：{{v0}}", "t0351": "管理路徑 {{v0}}", "t0352": "nginx 管理 設定檔: {{v0}}", "t0353": "下載失敗: {{v0}}", "t0354": "已下載 Adminer → {{v0}}", "t0355": "已有 {{v0}}", "t0356": "nginx 管理 設定檔: {{v0}}", "t0357": "已複製 → {{v0}}", "t0358": "埠號無效：{{v0}}", "t0359": "以用戶 {{v0}} 安裝 定時工作表", "t0360": "沿用已有金鑰 {{v0}} 個", "t0361": "已簽署 zone → {{v0}}（需 重新載入 權威 DNS；DS 仍要人手上 registrar）", "t0362": "未找到 managed zone 檔（試過 dns/zones/{{v0}}.zone）— 跳過簽署", "t0363": "{{v0}} 個檔案 under {{v1}}", "t0364": "TCP {{v0}}:{{v1}} 正常（{{v2}}ms）", "t0365": "TCP {{v0}}:{{v1}} 失敗：{{v2}}", "t0366": "PING 失敗：{{v0}}", "t0367": "超出配額：{{v0}}MB > {{v1}}MB", "t0368": "磁碟配額已超限（{{v0}} / {{v1}} MiB），無法{{v2}}", "t0369": "主目錄 非意圖路徑（目前 {{v0}} → 應為 {{v1}}）", "t0370": "Linux 用戶名為舊式「{{v0}}」（新建會用 {{v1}}）；遷移會保留現有用戶名並改 主目錄", "t0371": "就緒 {{v0}} / 降級 {{v1}} / 未隔離 {{v2}}（共 {{v3}}）", "t0372": "；待處理：{{v0}}{{v1}}", "t0373": "專案「{{v0}}」隔離", "t0374": "已複製到本機路徑 {{v0}}", "t0375": "身份 {{v0}}：{{v1}}", "t0376": "sftp（身份金鑰）連到 {{v0}} 成功", "t0377": "sftp（身份金鑰）失敗：{{v0}}", "t0378": "sftp 連到 {{v0}} 成功", "t0379": "sftp 失敗：{{v0}}", "t0380": "sftp 連到 {{v0}} 成功", "t0381": "sftp 失敗：{{v0}}（可設定備份 remote identityId）", "t0382": "已上傳 S3 {{v0}}", "t0383": "S3 失敗: {{v0}}", "t0384": "政策已開：{{v0}}/{{v1}} 管理員 已啟用 雙重驗證", "t0385": "未強制政策：{{v0}}/{{v1}} 名管理員已開雙重驗證。單管理員且未開 2FA 時，請先開 2FA 再加備援管理員。", "t0386": "{{v0}} 在 PATH", "t0387": "{{v0}} 找不到", "t0388": "請於系統安裝 {{v0}}，或於面板軟件／運行時 安裝", "t0389": "可用版本：{{v0}}", "t0390": "使用率約 {{v0}}%（總 {{v1}} MB）", "t0391": "使用率約 {{v0}}%（{{v1}}）", "t0392": "於服務矩陣啟動 {{v0}}", "t0393": "模式：{{v0}}", "t0394": "就緒 {{v0}} / 降級 {{v1}} / 缺少 {{v2}}（共 {{v3}} 項）", "t0395": "找不到（預期 {{v0}}）", "t0396": "主機 node：{{v0}}", "t0397": "主機 php：{{v0}}", "t0398": "主機 python：{{v0}}", "t0399": "主機 go：{{v0}}", "t0400": "主機 cargo：{{v0}}", "t0401": "節點 可用：{{v0}}", "t0402": "PHP 可用：{{v0}}", "t0403": "Python 可用：{{v0}}", "t0404": "Go 可用：{{v0}}", "t0405": "Rust 可用：{{v0}}", "t0406": "準備安裝 節點 {{v0}}", "t0407": "準備安裝 PHP {{v0}}", "t0408": "準備安裝 Python {{v0}}", "t0409": "準備安裝 Go {{v0}} 到 /usr/local/ysk/go", "t0410": "準備安裝 Rust（{{v0}}）到 /usr/local/ysk/rust", "t0411": "安裝失敗：{{v0}}", "t0412": "已準備 OpenJDK {{v0}} 安裝腳本", "t0413": "已準備 Kotlin {{v0}} 安裝腳本（需 JDK）", "t0414": "已準備 Bun（{{v0}}）安裝腳本", "t0415": "專案 主目錄 公鑰：{{v0}}", "t0416": "登入目標用戶 {{v0}}（專案隔離 主目錄）；請對 .ssh 執行 變更擁有者（介面 會嘗試）", "t0417": "已 變更擁有者 {{v0}} → {{v1}}", "t0418": "變更擁有者 .ssh 失敗：{{v0}}", "t0419": "已刪除 金鑰 · 重寫 authorized_keys", "t0420": "不支援的類型：{{v0}}", "t0421": "TTL {{v0}} 建議介於 30–604800", "t0422": "名稱 {{v0}} 同時有 CNAME 與其他類型（禁止）", "t0423": "名稱 {{v0}} 有多個不同 CNAME 目標", "t0424": "移除設定失敗：{{v0}}", "t0425": "帳戶 {{v0}} 已寫入管理設定", "t0426": "無法移除檔案：{{v0}}", "t0427": "已複製 {{v0}} 個設定檔到系統目錄", "t0428": "欄位 {{v0}} 無效", "t0429": "目前 主目錄 非意圖路徑（意圖 {{v0}}）", "t0430": "usermod -s 失敗：{{v0}}", "t0431": "鎖定失敗：{{v0}}", "t0432": "解鎖失敗：{{v0}}", "t0433": "set-property 失敗：{{v0}}（下次 deploy 會寫入 服務單元）", "t0434": "服務單元 {{v0}} 未 active — 限制已存 資料庫，下次 deploy 寫入 服務單元", "t0435": "setquota 未成功（檔案系統可能未啟 user_xattr/quota）：{{v0}}", "t0436": "主目錄 不存在：{{v0}}", "t0437": "已 變更擁有者 {{v0}} → {{v1}}", "t0438": "top header 失敗：{{v0}}", "t0439": "ps 完整欄位失敗：{{v0}}", "t0440": "目前 NI={{v0}}", "t0441": "PID {{v0}} 是本控制面進程（process.pid）", "t0442": "進程不存在或無權探測（kill -0 結束 {{v0}}）", "t0443": "kill -s {{v0}} 失敗：${err ||", "t0444": "已送 {{v0}} → PID {{v1}}", "t0445": "{{v0}} 個專案已暫停", "t0446": "{{v0}} 個專案未建立系統用戶", "t0447": "{{v0}} 項待審批", "t0448": "憑證已過期：{{v0}}", "t0449": "憑證 {{v0}} 日內到期：{{v1}}", "t0450": "時間 {{v0}}", "t0451": "DNSBL 上榜：{{v0}}", "t0452": "{{v0}} 項套用失敗／已封鎖", "t0453": "{{v0}} 項仍為 已寫入／draft", "t0454": "自動防護檔：{{v0}}", "t0455": "操作失敗：{{v0}}", "t0456": "系統日誌 磁碟偏高：≈{{v0}} MB", "t0457": "閾值 {{v0}} MB — 可到日誌中心 清理 或調整保留", "t0458": "df 失敗：{{v0}}", "t0459": "僅量測前 {{v0}} 個專案（共 {{v1}}）", "t0460": "目標版本 {{v0}} → {{v1}}", "t0461": "已嘗試升級 {{v0}}", "t0462": "升級失敗 結束={{v0}}", "t0463": "套件管理 列表 --upgradable: {{v0}} 可升級", "t0464": "套件管理 列表 --upgradable 不可用（結束 {{v0}}）；改用 套件管理-cache policy", "t0465": "dpkg+套件管理-cache policy: {{v0}} 套件", "t0466": "dpkg/套件管理-cache policy 失敗或空白（結束 {{v0}}）— 可能無 套件管理 或權限不足", "t0467": "節點 進程 {{v0}}（非 套件管理 nodejs 套件則不列入可升級清單）", "t0468": "真實可升級（candidate ≠ current）: {{v0}}", "t0469": "npm registry 回應 HTTP {{v0}}", "t0470": "GitHub releases 回應 HTTP {{v0}}", "t0471": "GitHub 套件.json 回應 HTTP {{v0}}", "t0472": "npm 頻道：{{v0}}@{{v1}}", "t0473": "npm {{v0}} 不可用：{{v1}}", "t0474": "GitHub releases 不可用：{{v0}}", "t0475": "GitHub 源碼 套件.json（{{v0}}）：{{v1}}", "t0476": "GitHub 套件.json 不可用：{{v0}}", "t0477": "有更新：{{v0}} → {{v1}}", "t0478": "來源目錄 {{v0}} 不是 git 儲存庫 — 可設 YSK_SOURCE_ROOT，或改用 npm 頻道（YSK_NPM_PACKAGE）", "t0479": "GitHub tarball 下載失敗：{{v0}}", "t0480": "已下載原始碼到 {{v0}}（staging only）— 未替換運行中安裝；請用部署腳本／git 工作目錄完成切換", "t0481": "使用 git 來源：{{v0}}", "t0482": "git 套用 步驟 {{v0}} 失敗 (結束 {{v1}}): {{v2}}", "t0483": "已更新來源樹至目標 {{v0}} 並 建置 — 請重啟 ysk-server 程序令新版本生效", "t0484": "已安裝 {{v0}}", "t0485": "npm 更新失敗：{{v0}}", "t0486": "已用 YSK_NPM_PACKAGE 安裝 {{v0}}", "t0487": "YSK_NPM_PACKAGE 安裝失敗：{{v0}}", "t0488": "可升級 {{v0}} → {{v1}}（CRITICAL CVE，需確認）", "t0489": "可升級 {{v0}} → {{v1}}（HIGH CVE，需確認）", "t0490": "可升級 {{v0}} → {{v1}}（可能不相容，需確認）", "t0491": "可升級 {{v0}} → {{v1}}（安全修補）", "t0492": "可升級 {{v0}} → {{v1}}（套件管理 Candidate）", "t0493": "無可用升級，但 OSV 標註已裝版有 {{v0}} 項漏洞信號", "t0494": "服務狀態：{{v0}}", "t0495": "已偵測到可執行檔：{{v0}}", "t0496": "未知 代理 運行時：{{v0}}", "t0497": "不支援的 代理 類型：{{v0}}", "t0498": "安裝指令失敗（不會假裝成功）：{{v0}}", "t0499": "代理 找不到 工作階段：{{v0}}", "t0500": "找不到任務：{{v0}}", "t0501": "用戶已存在: {{v0}}", "t0502": "救援用戶排除：{{v0}}", "t0503": "已排除專案 SFTP 風格用戶（ysks_/ysk_，internal-sftp 不適合 kbd-interactive）：{{v0}}", "t0504": "已從 strict 列表移除救援用戶：{{v0}}", "t0505": "{{v0}} 個用戶將要求 publickey+TOTP、關閉 密碼", "t0506": "管理檔：{{v0}}", "t0507": "已安裝 {{v0}} 並嘗試 重新載入 sshd", "t0508": "安裝／sshd -t 失敗：{{v0}}", "t0509": "PAM 預覽會寫管理檔：{{v0}}", "t0510": "變更擁有者 可能失敗：{{v0}}", "t0511": "警告：期望 模式 400（stat: {{v0}}）", "t0512": "PAM 片段（管理檔）：{{v0}}", "t0513": "sshd 提示（管理檔）：{{v0}}", "t0514": "scratch（只此一次回應）：{{v0}} — 請離線保存", "t0515": "pam.d/sshd 已引用：{{v0}}", "t0516": "用戶 {{v0}} 已有 遠端登入 雙重驗證（{{v1}}）。先 停用/retire。", "t0517": "已產生 secrets 主節點 金鑰：{{v0}}", "t0518": "變更擁有者 可能失敗：{{v0}}", "t0519": "ssh 失敗：{{v0}}", "t0520": "已產生 主節點 金鑰：{{v0}}（請一併備份）", "t0521": "已產生 主節點 金鑰：{{v0}}", "t0522": "已有相同 fingerprint：{{v0}} ({{v1}})", "t0523": "已寫 CF-only UFW 腳本：{{v0}}", "t0524": "保留埠：{{v0}}", "t0525": "CF IPv4 段：{{v0}} 個", "t0526": "CF IPv6 段：{{v0}} 個", "t0527": "ufw 腳本失敗：{{v0}}", "t0528": "auth 失敗 IP：{{v0}}", "t0529": "Top IP 樣本 {{v0}} 個", "t0530": "威脅分 {{v0}} · {{v1}}", "t0531": "自動防護檔 → {{v0}}{{v1}}", "t0532": "自動切換防護檔：{{v0}}", "t0533": "遠端登入 失敗×{{v0}}", "t0534": "auth 失敗來源 {{v0}} IP", "t0535": "請求×{{v0}}", "t0536": "掃描×{{v0}}", "t0537": "批量封禁 {{v0}}/{{v1}}", "t0538": "完成 {{v0}} 個 IP：成功 {{v1}}", "t0539": "熔斷：本小時已 auto-封鎖 {{v0}} 次", "t0540": "熔斷：本小時已達上限 {{v0}}", "t0541": "自動 封鎖 {{v0}} 個 IP", "t0542": "無法解析 zone {{v0}}（HTTP {{v1}}）", "t0543": "計劃：將 {{v0}} security_level → {{v1}}", "t0544": "模擬：{{v0}} → security_level={{v1}}", "t0545": "本小時已達上限（{{v0}}）", "t0546": "本小時 {{v0}} 次", "t0547": "緊急檔需 confirm=\"{{v0}}\"", "t0548": "已寫 Nginx 限速：{{v0}}", "t0549": "已注入 {{v0}} 個 vhost 限速標記", "t0550": "作用中防護檔 → {{v0}}", "t0551": "自動 封鎖 → {{v0}}（{{v1}} / {{v2}}）", "t0552": "套用防護檔：{{v0}}", "t0553": "fail2ban 失敗：{{v0}}", "t0554": "ufw 失敗：{{v0}}", "t0555": "封禁 {{v0}}", "t0556": "ufw delete 失敗：{{v0}}", "t0557": "解封 {{v0}}", "t0558": "略過 {{v0}}：{{v1}}", "t0559": "已注入限速到 {{v0}} 個 vhost", "t0560": "cluster_size={{v0}} < 登記節點 {{v1}}", "t0561": "只有 {{v0}} 個節點在 叢集", "t0562": "探測 不支援 {{v0}}", "t0563": "mysql/mariadb 查詢失敗：{{v0}}", "t0564": "SHOW 從節點/SLAVE 失敗：{{v0}}", "t0565": "SHOW 主節點 失敗：{{v0}}", "t0566": "從節點 應為 recovery，實際={{v0}}", "t0567": "主節點 不應 recovery，實際={{v0}}", "t0568": "從節點 異常 role={{v0}}", "t0569": "期望 主節點，實際 role={{v0}}", "t0570": "{{v0}} 個產物檔 · {{v1}}", "t0571": "封存 失敗：{{v0}}", "t0572": "已打包 {{v0}}（{{v1}} bytes）", "t0573": "{{v0}} 個 對等節點 目標", "t0574": "{{v0}}: identity {{v1}} 不可用 — 改用預設 金鑰", "t0575": "{{v0}}: ssh mkdir 失敗 {{v1}}", "t0576": "{{v0}}: 本地缺 {{v1}}", "t0577": "{{v0}}/{{v1}}: 安全複製 失敗 {{v2}}", "t0578": "{{v0}} 個 代理 · op={{v1}}", "t0579": "{{v0}}: enqueue 失敗 {{v1}}", "t0580": "未知拓撲 {{v0}}", "t0581": "本機 Galera 設定檔（{{v0}}）", "t0582": "在 {{v0}} 安裝 設定檔 並 join（手動 / 遠端登入 / 機群）", "t0583": "安裝 設定檔 → 系統控制 重新啟動 mariadb（非 初始化 節點）", "t0584": "找不到 設定檔 產物：{{v0}}", "t0585": "本機 套用 不支援 {{v0}}", "t0586": "已安裝系統 drop-in：{{v0}}", "t0587": "寫入系統 設定檔 失敗：{{v0}}", "t0588": "galera_new_cluster 失敗：{{v0}}", "t0589": "已 系統控制 重新啟動 {{v0}}（從庫/slot/哨兵 後續步驟見 scripts/）", "t0590": "已 系統控制 重新啟動 {{v0}}", "t0591": "ssh 探測 失敗：{{v0}}", "t0592": "從節點 探測 失敗：{{v0}}", "t0593": "主節點 探測 失敗：{{v0}}", "t0594": "全部 {{v0}} 節點 探測 成功 · size={{v1}}", "t0595": "全部 {{v0}} 節點 探測 成功", "t0596": "會安裝到 {{v0}} 並 {{v1}}", "t0597": "安全複製 失敗 {{v0}}", "t0598": "安裝 設定檔 失敗：{{v0}}", "t0599": "設定檔 已寫但 重新啟動 {{v0}} 失敗", "t0600": "已寫 {{v0}}${重新啟動 ?", "t0601": "不支援的引擎：{{v0}}", "t0602": "不支援的叢集類型：{{v0}}", "t0603": "已嘗試停止 {{v0}} 個專案 服務單元（成功-ish {{v1}}）", "t0604": "部分 stop 非零 結束（共 {{v0}}）— 仍繼續 匯出", "t0605": "與 {{v0}} 共用同一 RDB（略過重複 匯出）", "t0606": "打包完成 → {{v0}}", "t0607": "已建立用戶 {{v0}} uid={{v1}}", "t0608": "用戶已存在 {{v0}}", "t0609": "useradd 失敗: {{v0}}", "t0610": "變更擁有者 失敗: {{v0}}", "t0611": "主目錄 不存在，略過 變更擁有者: {{v0}}", "t0612": "匯出 檔不存在或空: {{v0}}", "t0613": "RDB 不存在: {{v0}}", "t0614": "已還原 RDB → {{v0}}", "t0615": "複製 RDB 失敗: {{v0}}", "t0616": "redis 啟動/ping: {{v0}}", "t0617": "提示：{{v0}} 不存在 — 匯出 應在 dataDir 隨 同步複製 到達（dumpRelPath）", "t0618": "無法解析目標 sha256: {{v0}}", "t0619": "ysk.json sha256 一致 {{v0}}…", "t0620": "ysk.json 不一致 local={{v0}} remote={{v1}}", "t0621": "本機 dataDir 不存在: {{v0}}", "t0622": "dataDir 不存在: {{v0}}", "t0623": "略過不存在的 主目錄: {{v0}}", "t0624": "主目錄 已在 dataDir 內，隨 dataDir 傳輸: {{v0}}", "t0625": "同步複製 主目錄 失敗 {{v0}}", "t0626": "傳輸 中止：主目錄 同步複製 失敗 {{v0}}", "t0627": "略過不存在: {{v0}}", "t0628": "傳輸 完成 → {{v0}}:{{v1}}", "t0629": "專案 {{v0}} 尚未建立系統用戶（主目錄 {{v1}} 不存在）。請到專案頁完成隔離。", "t0630": "專案 {{v0}} 綁定 bind_ip={{v1}} — 遷移後可能需清空（新機 IP 不同）", "t0631": "專案 {{v0}} 主目錄 非標準路徑: {{v1}}", "t0632": "磁碟有孤立 主目錄（store 無對應）: {{v0}}", "t0633": "Maildir 不存在: {{v0}}", "t0634": "來源缺 {{v0}} — 無法傳輸到目標機", "t0635": "無法探測 {{v0}}", "t0636": "來源 {{v0}} · {{v1}}", "t0637": "專案 {{v0}} · 信箱 {{v1}} · 資料庫 {{v2}} · Redis {{v3}}", "t0638": "需安裝軟件 {{v0}} 項 · homes {{v1}}", "t0639": "cutover 主機名 {{v0}}", "t0640": "警告 {{v0}} 則（請審閱）", "t0641": "已產生臨時金鑰 {{v0}}", "t0642": "無法產生臨時金鑰: {{v0}}", "t0643": "目標未確認寫入 authorized_keys: {{v0}}", "t0644": "已在 {{v0}} 安裝臨時公鑰（後續改用 金鑰 登入）", "t0645": "刪除臨時金鑰失敗: {{v0}}", "t0646": "{{v0}} 可用", "t0647": "dataDir 不存在: {{v0}}", "t0648": "預估傳輸量 ~{{v0}}", "t0649": "來源可用 {{v0}}（匯出 緩衝充足）", "t0650": "來源磁碟不足：可用 {{v0}}，建議 ≥ {{v1}}", "t0651": "盤點警告 {{v0}} 則（非全部阻塞）", "t0652": "遠端登入 連線 {{v0}}", "t0653": "目標用戶 {{v0}} 非 管理員（MVP 需要 管理員）", "t0654": "不支援的 OS（{{v0}}）；需要 Debian/Ubuntu", "t0655": "目標可用 {{v0}} ≥ 需求 {{v1}}", "t0656": "目標磁碟不足：可用 {{v0}}，需要約 {{v1}}", "t0657": "目標已有 {{v0}}/ysk.json — 拒絕覆蓋（需 forceWipeTarget）", "t0658": "目標目錄存在但無 ysk.json: {{v0}}", "t0659": "目標目錄將建立: {{v0}}", "t0660": "時鐘偏差 {{v0}}s", "t0661": "時鐘偏差 {{v0}}s ≥ 120s（影響 TLS/TOTP）", "t0662": "專案 {{v0}} 來源 bind_ip={{v1}} — 新機應改為空（全介面）", "t0663": "已清空 {{v0}} 個 project.bind_ip", "t0664": "無法 persist bind_ip 修正: {{v0}}", "t0665": "nginx 同步 例外: {{v0}}", "t0666": "私鑰不存在: {{v0}}", "t0667": "identity {{v0}} 不可用", "t0668": "遠端登入 失敗 結束={{v0}}: {{v1}}", "t0669": "本地路徑不存在: {{v0}}", "t0670": "同步複製 失敗 結束={{v0}}: {{v1}}", "t0671": "Redis RDB 已寫入 {{v0}}（--rdb）", "t0672": "--rdb 失敗: {{v0}}", "t0673": "BGSAVE 失敗: {{v0}}", "t0674": "Redis RDB 已複製 {{v0}} → {{v1}}（BGSAVE）", "t0675": "無法取得 Redis RDB（src={{v0}}）", "t0676": "{{v0}} 期望 {{v1}} 實際 {{v2}}", "t0677": "來源 主目錄 本就不存在，略過: {{v0}}", "t0678": "主目錄 缺失 {{v0}}", "t0679": "來源 Maildir 本就不存在: {{v0}}", "t0680": "maildir 缺失 {{v0}}", "t0681": "ysk.json fingerprint 已變（可能 reapply 寫回）local≠source", "t0682": "就緒檢查 錯誤: {{v0}}", "t0683": "DNS cutover：將以下 A/AAAA 指向新 IP → {{v0}}{{v1}}", "t0684": "verify 失敗：{{v0}} 項 mismatch", "t0685": "verify 通過（mismatches={{v0}}）", "t0686": "無效 目標: {{v0}}（需要 管理員@主機 或 主機）", "t0687": "找不到 job {{v0}}", "t0688": "手動：在目標執行 系統變更權限已開啟 ysk-server migrate post --job {{v0}} --data-dir {{v1}}", "t0689": "整機遷移完成 → {{v0}}", "t0690": "cutover 主機名: {{v0}}", "t0691": "遠端 post 完成 @ {{v0}}", "t0692": "找不到 job {{v0}}（確認 dataDir 已 同步複製）", "t0693": "遠端未回報成功標記 ({{v0}})", "t0694": "初始化 完成 → {{v0}}", "t0695": "非關鍵失敗: {{v0}}", "t0696": "不支援的 模式：{{v0}}", "t0697": "找不到 邊緣 節點：{{v0}}", "t0698": "節點 {{v0}} 需有 邊緣（或 origin）角色", "t0699": "不支援的 DNS 策略：{{v0}}", "t0700": "不支援的 SSL 模式：{{v0}}", "t0701": "CDN 站點上限 {{v0}}", "t0702": "origin shield 節點不存在：{{v0}}", "t0703": "edges: {{v0}} 個", "t0704": "origin URL（回源）: {{v0}}", "t0705": "已更新既有 CDN 站點 {{v0}}", "t0706": "已建立 CDN 站點 {{v0}}", "t0707": "origin shield：本 邊緣 回源經 shield {{v0}} → {{v1}}", "t0708": "origin.kind=project 但未提供 projectOriginUrl — 使用佔位 {{v0}}", "t0709": "邊緣 {{v0}} ({{v1}}): planned（未 fan-out — PR-C3）", "t0710": "邊緣 {{v0}}: 節點缺失", "t0711": "已寫入 managed nginx：{{v0}}", "t0712": "已寫入 邊緣 模板：{{v0}}", "t0713": "本機 nginx -t 失敗（proxy_cache_path 可能需在 http{}）：{{v0}}", "t0714": "使用 certId={{v0}} 網域={{v1}}", "t0715": "certId={{v0}} 檔案不存在：{{v1}}", "t0716": "找不到 certId={{v0}}", "t0717": "使用 dataDir 憑證 {{v0}}", "t0718": "使用本機 Let’s Encrypt {{v0}}", "t0719": "安全複製 失敗 {{v0}}", "t0720": "mkdir 失敗 {{v0}}", "t0721": "certbot 失敗：{{v0}}", "t0722": "originShieldNodeId={{v0}} 不存在 — 忽略 shield", "t0723": "{{v0}}: 有 遠端登入 目標 — 使用 遠端登入 同步套用（略過 機群 佇列）", "t0724": "機群 無法入佇列（已封鎖={{v0}}）— 提供 enqueue 或改用 遠端登入", "t0725": "機群 已入佇列 {{v0}} 邊緣 — 已排隊 ≠ 代理 已 nginx 重新載入；查看 Agents 指令紀錄", "t0726": "fleetAgentId={{v0}} — 需要控制面 機群 enqueue（介面 會注入）；或改填 遠端登入 做同步套用", "t0727": "找不到 設定檔：{{v0}}", "t0728": "讀 設定檔 失敗：{{v0}}", "t0729": "機群 enqueue 失敗：{{v0}}", "t0730": "nginx -t 失敗：{{v0}}", "t0731": "遠端登入 mkdir 失敗：{{v0}}", "t0732": "安全複製 失敗：{{v0}}", "t0733": "remote 重新載入 失敗：{{v0}}", "t0734": "fleetAgentId={{v0}} — 清除 需 機群 enqueue 或 遠端登入", "t0735": "enqueue 失敗：{{v0}}", "t0736": "清除 失敗：{{v0}}", "t0737": "remote 清除 失敗：{{v0}}", "t0738": "機群 清除 已入佇列 {{v0}} — 已排隊 ≠ 邊緣 已 清除", "t0739": "geo {{v0}}: 未知節點 {{v1}}", "t0740": "weighted 縮放至 maxRr={{v0}}（總副本 {{v1}}）", "t0741": "minHealthyEdges={{v0}} 但僅 {{v1}} 個健康 邊緣 — 防全滅：改用全部有 IP 的 邊緣（含 offline）", "t0742": "邊緣 {{v0}} 不存在 — 略過", "t0743": "探測 {{v0}} 例外：{{v1}}", "t0744": "已綁定 zoneId={{v0}} ({{v1}})", "t0745": "名稱 {{v0}} 已有 用戶 管理記錄 {{v1}} 筆 — CDN 仍寫入 managedBy=cdn（可能並存；請檢查 zone）", "t0746": "geo subdomain {{v0}}: 無 IP — 略過", "t0747": "access_log 抽樣 {{v0}}（{{v1}} 個 cache 狀態 權杖）", "t0748": "讀取本地 日誌 {{v0}}", "t0749": "cache 目錄 {{v0}} ≈ {{v1}} bytes（非命中率）", "t0750": "cache 抽樣僅前 {{v0}}/{{v1}} 個站點", "t0751": "IPv4 無效：{{v0}}", "t0752": "IPv6 無效：{{v0}}", "t0753": "CDN 節點上限 {{v0}}", "t0754": "HTTP {{v0}}（視為不健康）{{v1}}", "t0755": "HTTP 探活失敗：{{v0}}", "t0756": "TCP {{v0}}:443/80 皆無法連線", "t0757": "探活 {{v0}}/{{v1}} 健康", "t0758": "列表-units 失敗：{{v0}}", "t0759": "共 {{v0}} 個 service units", "t0760": "已改用 服務單元 {{v0}}", "t0761": "輸出截斷至 {{v0}} bytes", "t0762": "journalctl · {{v0}} 行", "t0763": "已 清理：{{v0}}", "t0764": "清理 失敗：{{v0}}", "t0765": "應用層 filter：{{v0}} 行匹配", "t0766": "檔案 {{v0}} · {{v1}} bytes · 顯示 {{v2}} 行", "t0767": "路徑不在 允許清單：{{v0}}", "t0768": "系統日誌 磁碟偏高：≈{{v0}} MB（閾值 {{v1}} MB）", "t0769": "專案 {{v0}} · {{v1}} 個 日誌 檔（含子目錄）", "t0770": "已匯出 {{v0}} 行（{{v1}}）", "t0771": "未到時間窗 {{v0}}", "t0772": "每月（DB-IP City Lite {{v0}}；失敗試上月）", "t0773": "每月 fallback {{v0}}", "t0774": "政策：{{v0}} · 國 {{v1}} · 省 {{v2}} · 市 {{v3}}{{v4}} · ASN {{v5}}", "t0775": "檔案過細（{{v0}} B），可能下載失敗", "t0776": "略過 {{v0}} fallback（已成功）", "t0777": "已更新 {{v0}}（{{v1}} B）", "t0778": "更新失敗 {{v0}}：{{v1}}{{v2}}", "t0779": "找不到設定檔：{{v0}}", "t0780": "無法解析設定檔：{{v0}}", "t0781": "找不到憑證：{{v0}}", "t0782": "預覽試行：未 系統控制 {{v0}}。加 --執行 且 系統變更權限已開啟 與管理員權限 先真正執行", "t0783": "找不到 job {{v0}}", "t0784": "Web UI: 找不到 (建置 apps/網站 or set YSK_WEB_ROOT)\\n", "t0785": "DNS zone 已建立（draft）: {{v0}}", "t0786": "DNS zone 建立失敗: {{v0}}", "t0787": "郵件域名已登記: {{v0}}", "t0788": "郵件域名建立失敗: {{v0}}", "t0789": "找到 {{v0}} 個可能相關的續期 定時工作", "t0790": "Restic {{v0}}/{{v1}} 成功", "t0791": "已確保排程：{{v0}} {{v1}}", "t0792": "設定已存在於 {{v0}}。使用 --force 覆寫。", "t0793": "設定已存在於 {{v0}}", "t0794": "找不到介面 {{v0}}", "t0795": "hostname 失敗: {{v0}}", "t0796": "pretty hostname 失敗: {{v0}}", "t0797": "timezone 失敗: {{v0}}", "tScoreFrom": "分數={{score}} · 由 {{from}} 切換", "appliedTag": "（已套用）", "writtenTag": "（只寫檔）", "selfDestMissing": "找不到執行中安裝目錄（systemd ExecStart 或執行中 cli.js）", "selfDestUnwritable": "無法寫入執行中安裝目錄 {{v0}}", "selfApplied": "已將 {{v0}} 套用到 {{v1}}", "selfVerifyFail": "套用後版本檔未包含 {{v0}}", "selfDownloadFail": "無法下載或解壓官方套件 {{v0}}：{{v1}}", "selfOverlayFail": "官方套件未能套用到執行中目錄：{{v0}}", "selfUpgradeHint": "面板套用失敗。請以 root 執行：curl -fsSL https://raw.githubusercontent.com/yanshekki/ysk-server/main/install.sh | bash -s -- --upgrade" }, "tpl": { "deleted": "已刪除 {{name}}", "removed": "已移除 {{name}}", "failedDetail": "失敗：{{detail}}", "failedColon": "失敗: {{detail}}", "actionFailed": "{{action}} 失敗: {{detail}}", "restartFailed": "重啟失敗：{{detail}}", "chownFailed": "變更擁有者 失敗：{{detail}}", "available": "可用：{{detail}}", "supportedNotProbed": "支援 {{name}} — 尚未探測到", "wrote": "已寫 {{path}}", "wroteSettings": "已寫入設定 {{path}}", "wroteManaged": "已寫入管理檔 {{path}}", "copyFailed": "複製失敗：{{detail}}", "copyFailed2": "複製失敗: {{detail}}", "reloadFailed": "重新載入 失敗：{{detail}}", "reloadFailed2": "重新載入 失敗: {{detail}}", "nginxReloadFailed": "nginx 重新載入 失敗：{{detail}}", "nginxTestFailed": "nginx -t 失敗: {{detail}}", "nginxConfigFailed": "Nginx 設定檢查失敗：{{detail}}", "psqlFailed": "psql 失敗：{{detail}}", "redisCliFailed": "redis-cli 失敗：{{detail}}", "restartFailed2": "重新啟動 失敗：{{detail}}", "missing": "缺少 {{name}}", "project": "專案 {{name}}", "logNotFound": "找不到日誌：{{path}}", "clusterNotFound": "找不到叢集：{{id}}", "domainInvalid": "域名無效：{{domain}}", "exported": "已匯出 {{path}}", "reenabledLink": "已重新啟用連線 {{name}}", "installed": "已安裝", "missingDataDir": "缺少 dataDir", "installIncomplete": "安裝未完成", "noPackages": "無套件", "recentlyUpdated": "最近已更新", "needRootRead": "需要管理員權限 讀取", "reenabledPersist": "已重新啟用連線（重開仍在）", "runtimeOnlyHint": "（重開可能消失；要持久請用「保存」）", "statusWrittenPartial": "狀態：已寫入/partial", "keyMissingOrNotDeleted": "金鑰 不存在或未刪除", "passwordCryptStored": "密碼已以 crypt 雜湊儲存（不存明文）", "skipInvalidUsername": "略過無效用戶名", "digNoAnswer": "dig 無答案（NXDOMAIN 或空）", "ipAddrAddFailed": "ip addr add 失敗：{{detail}}", "ipAddrDelFailed": "ip addr del 失敗：{{detail}}", "connUpWarn": "connection up 警告：{{detail}}", "ntpEnableFailed": "啟用 NTP 失敗: {{detail}}", "cancelFailed": "取消失敗: {{detail}}", "powerCmdFailed": "電源指令失敗: {{detail}}", "reniceFailed": "renice 失敗：{{detail}}", "pgIncludeHint": "請將此檔 include 到 postgresql.設定檔 或於套用時複製", "none": "無", "success": "成功", "on": "開", "off": "關", "continueOp": "繼續操作", "unavailable": "不可用", "unknownError": "未知錯誤", "noParen": "(無)", "keepOldDb": "（保留舊庫）", "ufwNotDetected": "系統未偵測到 UFW", "fail2banStartHint": "可到 fail2ban 頁啟動", "hasExecuteNotRoot": "有 執行 但非 管理員", "notRootTarget": "非 管理員（目標 useradd/套件管理 會 已封鎖）", "reapplyDone": "reapply 關鍵步驟完成", "someFailed": "有失敗 — 請查看 results", "securityDesc": "密碼、TLS、本機限制", "yskControlPlane": "YSK 控制面", "sslDistributeNote": "SSL distribute：cert 在 邊緣 ≠ 瀏覽器信任鏈完整；請 dig / curl -vI https:// 驗證", "autoNever": "永不自動", "autoManualEmergency": "只人手 EMERGENCY", "probeMech": "外網 TCP、面板 req/min、TCP inuse、fail2ban、UFW", "probeTunable": "升／降檔門檻", "priorityBlockers": "優先處理 {{count}} 項阻擋：{{list}}", "readinessNotProduction": "就緒檢查 未達 production：{{list}}", "noRestart": "不 重新啟動", "cityPolicyOff": "（市政策關）", "pidStarted": "進程已啟動 pid={{pid}} {{extra}}", "pidUser": "（user={{user}}）", "pidDegraded": "（degraded）", "killFailed": "kill -s {{sig}} 失敗：{{detail}}", "routeAdded": "已加入路由 {{dst}}{{via}}{{dev}}", "dnsWritten": "已寫入 {{conn}}：DNS {{dns}}{{search}}", "peerInstalled": "已安裝到 {{dest}}{{restart}}" }, "installedTool": "已安裝（工具）", "cron": { "preserveHostLines": "已保留主機 crontab 中 {{count}} 行非 YSK 工作（不會整份覆蓋）。", "noHostLinesOrEmpty": "主機 crontab 無額外非 YSK 行（或空白）。", "installReplacesYskOnly": "安裝只更新帶 YSK 標記的工作；其他主機工作已合併保留。", "hostScanNeedRoot": "讀取其他用戶 crontab 需要控制面以 root 執行；目前僅能列出控制面自身 crontab。", "hostScanSkipUser": "略過用戶 {{user}}（無權讀取）", "hostUserInvalid": "crontab 用戶無效。", "hostScheduleInvalid": "主機 cron 排程無效。", "hostLineNotJob": "該 crontab 行不是工作。", "hostLineMissing": "找不到對應的 crontab 行（主機 crontab 可能已變更）。", "hostLineDuplicate": "該工作行出現 {{count}} 次；請先改成唯一的一行。", "hostReadFailed": "無法讀取 crontab：{{detail}}", "hostWriteFailed": "寫入 crontab 失敗：{{detail}}", "hostRewriteNeedExecute": "寫入主機 crontab 需要 root 與 YSK_EXECUTE=1。目前只是預覽。", "hostRewriteNeedRoot": "修改其他用戶的 crontab 需要控制面以 root 執行。", "hostPreview": "下一行：{{line}}", "hostPreviewDelete": "下一步：移除該行。", "hostRewritten": "已寫入 {{user}} 的 crontab。", "hostRunNeedExecute": "試跑主機 cron 指令需要 YSK_EXECUTE=1。", "hostRan": "已用 {{user}} 試跑主機 cron 指令。", "hostAdoptNeedExecute": "把主機行納入面板需要 YSK_EXECUTE=1（否則安裝時會重複）。", "hostAdopted": "主機行已標 # ysk:{{id}} 並登記到面板。", "hostConfirmMismatch": "確認內容必須與指令相同。", "hostAdoptOnlyInstallUser": "只能納入「安裝到系統」會寫入的 crontab（root／本進程用戶）。其他用戶安裝時會重複。", "hostAdoptEnableFirst": "請先啟用該主機行，再納入面板。", "hostPercentNewline": "crontab 把未跳脫的 % 當成換行。日期格式請寫 \\%Y（或不要用 %）。" }, "dbBrowser": { "pmaInstalled": "已安裝 phpMyAdmin → {{path}}", "pmaConfigWritten": "已寫入 phpMyAdmin 設定與暫存目錄（Cookie 登入；上 HTTPS 更穩）", "pmaExtractFailed": "phpMyAdmin 下載或解壓失敗：{{detail}}", "projectCreated": "已建立專案 {{id}}（{{name}}）" }, "firewallAllow": { "already": "{{port}}/{{proto}}{{from}}：規則已存在", "partial": "部分成功：{{ok}} 成功、{{fail}} 失敗", "fromLabel": "（來源 {{from}}）" }, "firewallDeleteByComment": { "removed": "已移除 {{n}} 條符合 {{prefix}} 的防火牆規則", "none": "沒有符合 {{prefix}} 的防火牆規則" }, "serviceExposure": { "needsDecision": "{{service}}：請確認是否對外開放此服務", "private": "{{service}}：保持僅本機（未開公網埠）", "restrictedEmpty": "受限模式需要至少一個允許的 IP／網段", "badCountry": "無效國家代碼：{{cc}}", "zoneDownloadFail": "下載 {{cc}} 國家網段失敗：{{detail}}", "zoneEmpty": "{{cc}} 國家網段檔為空", "zoneDownloaded": "已下載 {{cc}} 共 {{n}} 個 CIDR", "zoneMissing": "缺少 {{cc}} 網段檔 — 請放在 geoip/country-zones 或允許下載", "zoneCidrCap": "國家 CIDR 已上限至 {{n}} 條", "geoNeedExecute": "國家允許清單需要 YSK_EXECUTE", "geoNeedRoot": "國家允許清單需要 root", "geoNoCidrs": "未載入任何國家 CIDR — 無法套用地區限制", "ipsetMissing": "未安裝 ipset — 已跳過國家允許清單", "ipsetApplyFail": "ipset／iptables 套用失敗：{{detail}}", "ipsetApplied": "已套用國家允許集合 {{set}}（{{countries}}，{{n}} 個 CIDR）", "ipsetCleared": "已清除國家 ipset {{set}}", "geoBestEffort": "國家過濾為 best-effort（ipset）；雲安全組須另行設定" }, "goLive": { "deployIncomplete": "上線：部署未完成", "deployFailed": "上線部署失敗：{{detail}}", "publishIncomplete": "上線：發佈 Nginx 未完成", "publishFailed": "上線發佈失敗：{{detail}}" }, "ops": { "projectNameExists": "專案名稱已存在：{{name}}", "sslNotReady": "SSL 未就緒：網域 {{domain}} 尚無可用證書。", "sslNotReadyDetail": "SSL 未就緒：網域 {{domain}} 尚無可用證書（面板申請／上載或 Let’s Encrypt live 路徑）。", "sslGoToPage": "請先到「SSL 憑證」申請或上載，再發佈 + SSL。", "sslRejectWrite": "已拒絕寫入 SSL nginx conf，避免 nginx -t 因缺檔失敗。", "installAborted": "安裝已中止（客戶端斷線或取消）", "phpPackagesPartialFail": "部分 PHP 套件安裝失敗：{{list}}（核心 CLI 可能仍可用）", "pdnsBindConflict": "PowerDNS 無法綁定 0.0.0.0:53（埠被佔用），多與 systemd-resolved 衝突。請改綁公網 IP（面板：修復 PowerDNS）。" }, "webmail": { "notInstalled": "尚未安裝網頁電郵；請勾選下載後再執行", "needExecute": "下載網頁電郵需要系統變更權限（YSK_EXECUTE）及外網", "needExecuteBeforeCreate": "未開系統變更權限前不會建立半成品專案", "notRoundcubeTree": "文件根目錄不是完整 Roundcube（仍可能是 php-hello）", "notSnappyTree": "文件根目錄不是完整 SnappyMail", "installIncompleteHint": "專案已存在但網頁電郵未裝好 — 請開 EXECUTE 後按「重新安裝／升級」", "extractFailed": "{{tool}} 下載或解壓失敗：{{detail}}", "roundcubeInstalled": "已安裝 Roundcube {{version}} → {{path}}", "roundcubeReuse": "沿用已安裝 Roundcube → {{path}}", "roundcubeConfigWritten": "已寫入 Roundcube 設定（SQLite、IMAP 993、SMTP 587）", "snappyInstalled": "已安裝 SnappyMail {{version}} → {{path}}", "snappyReuse": "沿用已安裝 SnappyMail → {{path}}", "snappyAdminHint": "首次開啟請完成 SnappyMail 管理員初始化，並新增本機 IMAP 網域", "imapSmtpHint": "IMAP {{imap}}:993 · SMTP {{smtp}}:587（登入用信箱完整地址與密碼）", "projectCreated": "已建立 PHP 專案 {{name}}（{{tool}}，{{id}}）", "domainRequired": "需要網頁電郵主機名", "openHint": "以信箱地址與密碼登入；上線後請到專案頁或本頁開啟網址", "sslHint": "建議為 {{domain}} 申請 Let’s Encrypt（SSL 頁）", "bootstrapLegacyHint": "Bootstrap 未注入專案服務，已寫 dataDir 骨架；面板請用「建立並上線」走 PHP 專案路徑", "ssoPluginInstalled": "已安裝 SSO 插件 → {{path}}", "forceHttpsOn": "Roundcube force_https 已開啟（需已有 HTTPS）", "forceHttpsOff": "force_https 關閉 — 請在 SSL 頁簽發後重裝並勾選強制 HTTPS", "reinstallHint": "專案已存在：請用「重新安裝／升級」或傳 reinstall:true", "reinstalling": "重新安裝網頁電郵到專案 {{name}}（{{id}}）", "reinstallStart": "開始升級／重裝（目標版本相關：{{version}}，專案 {{id}}）", "projectNotFound": "找不到網頁電郵專案", "snappyAdminOnce": "SnappyMail 管理員帳號 {{user}} — 密碼只顯示一次（見結果／ONCE 檔）", "snappyAdminPassword": "SnappyMail 管理員密碼（請立即複製）：{{password}}", "publicHtmlStub": "文件根目錄仍是 SnappyMail／RainLoop 外層 stub。HTTP 必須指向 public_html 應用樹 — 請套用此修正後重新安裝網頁電郵。", "goLiveFailed": "網頁電郵檔案已安裝，但專案上線／部署健康檢查失敗 — 請展開詳細。", "forceHttpsNeedsSsl": "已開啟 Roundcube 強制 HTTPS：請先為此主機名綁定 SSL，否則公網跳轉可能失敗；未綁證前可取消勾選。", "roundcubePublicHtmlDocRoot": "HTTP 文件根已設為 Roundcube public_html（{{path}}）", "docRootUpdated": "專案文件根已更新為 {{path}}", "docRootUpdateFailed": "無法更新專案文件根：{{detail}}", "sqliteSchemaReady": "已初始化 Roundcube SQLite schema", "sqliteSchemaFailed": "Roundcube SQLite schema 初始化失敗：{{detail}}", "snappyFullEmailLogin": "郵箱登入須用完整電郵（user@domain），不要只用 local-part", "removedBogusPublicHtml": "已刪殘留 public_html（php-hello），避免 webmail 指錯樹", "snappyDocRoot": "SnappyMail HTTP 文件根：{{path}}", "phpHelloStillPresent": "安裝後網站根仍是 php-hello（YSK PHP OK）— webmail 未成功取代" }, "vpn": { "needInstall": "請安裝 {{engine}}", "openvpnComing": "OpenVPN 完整流程將於後續版本提供。", "outlineComing": "Outline／Shadowsocks 將於後續版本提供。", "needExecuteServer": "VPN 伺服器設定需 root 與 YSK_EXECUTE=1。", "serverStopped": "已停止 {{engine}} 伺服器。", "serverStopFailed": "無法停止 {{engine}} 伺服器：{{detail}}", "needExecuteClient": "VPN 客戶端連線需 root 與 YSK_EXECUTE=1。", "keygenFailed": "WireGuard 金鑰產生失敗（是否已安裝 wg？）。", "serverKeysCreated": "已建立 WireGuard 伺服器金鑰。", "applyFailed": "套用 WireGuard 設定失敗：{{detail}}", "serverActive": "已套用 WireGuard 伺服器（UDP {{port}}）。", "serverMissing": "尚未初始化 WireGuard 伺服器 — 請先啟動伺服器。", "peerCreated": "已建立客戶端「{{name}}」。", "peerNotFound": "找不到客戶端。", "peerRemoved": "已移除 {{name}}。", "peersSynced": "已在運行中的 WireGuard 介面重新載入對等端，未重啟伺服器。", "setEndpointHint": "請設定公開端點（host:port），手機客戶端才能連上。", "invalidConf": "此檔不是有效的 VPN 客戶端設定。請使用 WireGuard 或 OpenVPN 客戶端設定檔。", "clientImported": "已匯入設定檔「{{name}}」。", "profileNotFound": "找不到客戶端設定檔。", "clientUpFailed": "連線失敗：{{detail}}", "clientUp": "已連線：{{name}}", "clientDown": "已斷線：{{name}}", "clientDeleted": "已刪除設定檔：{{name}}", "autostartOn": "已開機自動連：{{name}}", "autostartOff": "已關閉開機自動連：{{name}}", "ovpnPkiStart": "正在產生 OpenVPN PKI（DH 參數可能需一分鐘）…", "ovpnPkiDone": "OpenVPN PKI 已就緒。", "ovpnServerActive": "已套用 OpenVPN 伺服器（{{proto}} {{port}}）。", "invalidOvpn": "OpenVPN 設定應包含 client／remote。", "ssHonest": "使用 shadowsocks-libev ss-server — 非完整 Outline Manager。", "ssKeysCreated": "已產生 Shadowsocks 伺服器密碼。", "ssServerActive": "已套用 Shadowsocks 伺服器（埠 {{port}}）。", "ssSharedPassword": "所有 ss:// 標籤共用同一伺服器密碼（重新啟動伺服器可輪換）。", "ssPackageYielded": "已停用並屏蔽 Debian 預設 shadowsocks-libev（只聽本機），等 YSK 可在本機綁定公開 {{port}}。", "ssEndpointAutofilled": "公開端點已設為 {{endpoint}}。", "ssClientsRewritten": "已按而家端點／密碼重寫 {{n}} 個用戶 ss://。", "ssUfwOpened": "已開 UFW {{port}}/tcp+udp（若已裝 ufw）。", "endpointAutofilled": "公開端點已設為 {{endpoint}}。", "ovpnClientsRewritten": "已更新 {{n}} 個 OpenVPN 客戶端設定的 remote（下載／QR 會使用新地址）。", "accessFullNat": "已啟用全網上網（IP 轉發 + NAT）", "accessLanOnly": "已設定為僅連區域（無外網 NAT）", "accessReconnectHint": "已連線的客戶端請斷線後再連，才會使用新路由", "ovpnNatDurable": "安裝 OpenVPN NAT/轉送以便重新啟動 (systemd ExecStartPost)。", "clientFullTunnelProtect": "Detected full-tunnel client (AllowedIPs 0.0.0.0/0). Host protect applied so panel/SSH replies stay on LAN NIC.", "clientFullTunnelHint": "提示：僅對於分割訪問，請在conf中將AllowedIPs設定為VPN/LAN CIDR（而不是0.0.0.0/0），然後重新連接。" }, "vnc": { "needInstall": "請安裝 {{stack}}", "needExecute": "未啟用 YSK_EXECUTE — 無法安裝套件或建立 Linux 用戶。", "needRoot": "非 root — 無法 useradd 或套用 vncserver。", "hostnameResolves": "主機名 {{hostname}} 可解析。", "hostnameUnresolvable": "此主機無法解析自己的主機名（{{hostname}}）。修好 /etc/hosts 之前，VNC 工作階段會啟動失敗。", "hostnameAlreadyResolves": "主機名 {{hostname}} 已可解析 — 未改 /etc/hosts。", "hostnameWouldAppend": "將會附加到 /etc/hosts：{{line}}", "hostnameAppended": "已附加到 /etc/hosts：{{line}}", "hostnameAppendFailed": "無法寫入 /etc/hosts：{{detail}}", "hostnameAliasPresent": "主機名 {{hostname}} 已在 /etc/hosts 列為完整別名 — 未再附加。", "hostnameStillUnresolvable": "已寫入 /etc/hosts，但 {{hostname}} 仍無法解析。請確認 nsswitch 的 hosts 包含 files。", "skipStartHostname": "未啟動 display — 請先修好主機名解析。", "novncAssetsOnly": "已找到 noVNC 網頁資源；仍缺 websockify 執行檔。", "viewerNeedExecute": "要在瀏覽器開啟本機 VNC 桌面，需要 root 並啟用 YSK_EXECUTE", "browserSessionReady": "瀏覽器 VNC 工作階段已就緒：{{name}}", "clientPathUserReachable": "路徑：經用戶可達端點 — {{name}} → {{target}}（瀏覽器經面板轉發）", "clientPathServerProxy": "路徑：經伺服器代理 — {{name}} → {{target}}（經本機伺服器網絡轉發）", "clientOpenInBrowserHint": "請在客戶端列表按「在瀏覽器開啟」以使用內嵌 VNC", "probeOk": "可達性正常：控制面可對 {{target}} 開啟 TCP", "probeRefused": "{{target}} 拒絕連線（沒有服務在監聽）。目標主機的 VNC 是否已啟動？", "probeTimeout": "從此伺服器連線至 {{target}} 逾時。請檢查防火牆／路由。", "probeDns": "無法解析主機名「{{host}}」。", "probeNet": "從此伺服器無法連至 {{target}} 的網絡。", "probeFailed": "無法連至 {{target}}：{{detail}}", "probeInvalid": "無效的 VNC 目標 {{host}}:{{port}}", "probeHintUserReachable": "路徑為「經用戶可達端點」：面板仍須對該公網主機開啟 TCP（瀏覽器本身不能直接使用 RFB）。", "probeHintServerProxy": "路徑為「經伺服器代理」：目標必須可從此控制面伺服器的網絡連上。", "connectHostOverride": "伺服器代理：顯示主機 {{display}}，實際 TCP 連至 {{connect}}", "probeConnectHostHint": "顯示目標為 {{display}}，探測／連線位址為 {{connect}}（連線主機覆寫）。", "accountNotFound": "找不到 VNC 帳號", "accountExists": "此名稱或 Linux 用戶的 VNC 帳號已存在", "accountCreated": "已建立 VNC 帳號 {{name}}（{{user}}，display :{{display}}）", "accountUpdated": "已更新 VNC 帳號 {{name}}", "accountDeleted": "已刪除 VNC 帳號 {{name}}", "invalidName": "帳號名稱無效", "invalidGeometry": "解析度無效（例如 1920x1080）", "displayBusy": "Display 編號無效或已被使用", "displayExhausted": "可用 VNC display 編號已用盡", "userWrittenOnly": "Linux 用戶 {{user}} 只記在控制面（需 root + YSK_EXECUTE 先 useradd）", "userExists": "Linux 用戶 {{user}} 已存在", "userCreated": "已建立 Linux 用戶 {{user}}", "useraddFailed": "useradd {{user}} 失敗：{{detail}}", "userdelBlocked": "無權限刪除 Linux 用戶 {{user}}（需 root + YSK_EXECUTE）", "userAlreadyGone": "Linux 用戶 {{user}} 已不存在", "userdelFailed": "userdel {{user}} 失敗：{{detail}}", "userdelLeftover": "面板帳號已刪，但 Linux 用戶 {{user}} 仍在主機。請到用戶頁或主機再清。", "userDeleted": "已刪除 Linux 用戶 {{user}}", "passwordTooShort": "VNC 密碼至少 6 個字元", "passwordWrittenOnly": "密碼只記在控制面（需 root + YSK_EXECUTE 先 vncpasswd）", "passwordFailed": "寫入 VNC 密碼失敗：{{detail}}", "passwordNeedTiger": "找不到 vncpasswd。請先安裝 TigerVNC（tigervnc-standalone-server）再設定密碼。", "passwordSet": "已為 {{user}} 設定 VNC 密碼", "passwordUpdated": "已更新 {{name}} 的密碼", "passwordMetaOnly": "密碼暫只記中繼資料，待系統套用", "xstartupWrittenOnly": "未寫入 xstartup 到 home（需 root + YSK_EXECUTE）", "xstartupWriteFailed": "無法寫入 ~/.vnc/xstartup ({{detail}})。需要 root + YSK_EXECUTE。", "xstartupFailed": "VNC xstartup／桌面啟動失敗（display :{{display}}，{{detail}}）。可改 XFCE 設定檔，或安裝 xfce4-terminal／xterm。", "xstartupWritten": "已寫入 {{path}}", "sessionStartBlocked": "無權限啟動 VNC session（需 root + YSK_EXECUTE）", "sessionStartFailed": "啟動 display :{{display}} 失敗：{{detail}}", "sessionStartHostname": "啟動 display :{{display}} 失敗：此主機無法解析自己的主機名。請把主機名寫入 /etc/hosts（或修正 DNS）後再啟動工作階段。", "sessionStarted": "已為 {{user}} 啟動 :{{display}}（埠 {{port}}）", "sessionStartUnverified": "啟動命令成功但 RFB 埠尚未監聽", "sessionAlreadyRunning": "{{user}} 的 VNC 已在運行（:{{display}} / 埠 {{port}}）", "vncserverMissing": "未安裝 TigerVNC 啟動程式（tigervncserver／vncserver）— 請到「安裝」分頁安裝", "vncserverWrapperMissing": "偵測到 {{found}}，但缺少 tigervncserver／vncserver 包裝腳本 — 請重裝 tigervnc-standalone-server", "vncPackageWithoutBin": "套件 tigervnc-standalone-server 已裝但找不到啟動腳本 — 請重裝該套件", "needPasswordBeforeStart": "請先設定 VNC 密碼（至少 6 個字元）再啟動", "displayPortBusy": "Display :{{display}} → 埠 {{port}} 已被佔用 — 請先停止其他 session 或改用其他 display", "sessionStartPermission": "啟動 display :{{display}} 權限被拒", "staleLockCleared": "已清除 display :{{display}} 殘留 lock，重試中", "sessionStopBlocked": "無權限停止 VNC session（需 root + YSK_EXECUTE）", "sessionStopped": "已停止 {{user}} 的 display :{{display}}", "linuxUserKept": "已保留系統上的 Linux 用戶 {{user}}", "novncStartBlocked": "無權限啟動 noVNC（需 root + YSK_EXECUTE）", "novncAlreadyRunning": "noVNC 已在埠 {{port}} 運行", "novncStartFailed": "啟動 websockify 失敗：{{detail}}", "novncStarted": "noVNC 聽 127.0.0.1:{{httpPort}} → RFB {{rfbPort}}", "novncNotRunning": "noVNC 未在運行", "novncStopBlocked": "無權限停止 noVNC（需 root + YSK_EXECUTE）", "novncStopped": "已停止 noVNC 埠 {{httpPort}}", "directNeedsAllBind": "RFB 只聽 localhost — 外網直連需改 bind 或用隧道", "directOpenFirewall": "直連客戶端請放行 TCP {{port}}", "viaServerReady": "noVNC 已就緒 — 開本機 URL 或用 SSH 隧道", "viaServerStartFirst": "請先啟動 noVNC 以經 server 用瀏覽器連入", "viewTicketIssued": "已發出短期觀看 ticket", "invalidPort": "埠號無效", "firewallNeedExecute": "開 UFW 埠需 YSK_EXECUTE", "firewallNeedRoot": "開 UFW 埠需 root", "firewallFailed": "ufw allow 失敗：{{detail}}", "firewallOpened": "UFW 已放行 TCP {{port}}", "clientInvalid": "客戶端名稱同主機必填", "clientNotFound": "找不到客戶端設定", "clientUpBlocked": "無權限連線 VNC client（需 root + YSK_EXECUTE）", "clientUpFailed": "客戶端連線失敗：{{detail}}", "clientViaServerUp": "客戶端 {{name}} 已可於瀏覽器經面板使用 VNC（舊版 websockify 說明已退役）。請按「在瀏覽器開啟」。", "clientDirectUp": "客戶端 {{name}} 僅使用瀏覽器內 VNC（已移除主機 vncviewer 路徑）。請在瀏覽器開啟 → {{target}}。", "clientNeedViewer": "桌面版 vncviewer 為可選。請使用「在瀏覽器開啟」的內嵌 VNC 客戶端。", "clientDownBlocked": "無權限斷線（需 root + YSK_EXECUTE）", "clientDown": "已斷開客戶端 {{name}}", "clientDeleted": "已刪除客戶端設定", "sessionStartCwd": "VNC 啟動失敗：工作目錄 VNC 用戶無權限（display :{{display}}）。已改為由 HOME 啟動。", "desktopRestarted": "套用桌面設定檔並重新啟動會話 ({{desktop}})。重新連接 VNC/noVNC。", "desktopNeedsStart": "桌面設定檔 {{desktop}} 寫入 xstartup。啟動會話以進行申請。", "linuxUserRolledBack": "VNC 密碼失敗後已刪除遺留 Linux 用戶 {{user}}。", "linuxUserOrphan": "VNC 密碼失敗後無法刪除遺留 Linux 用戶 {{user}}。" }, "apache": { "needServerName": "需要域名", "siteExists": "站點已存在", "siteNotFound": "找不到站點", "wroteConf": "已寫入 {{path}}", "needExecute": "需 YSK_EXECUTE", "settingsWritten": "已寫入 Apache 預設", "managedDir": "管理目錄 {{path}}", "dryRun": "預演", "copyFailed": "複製失敗：{{file}}", "configOk": "configtest 通過", "configFailed": "configtest 失敗：{{detail}}", "reloaded": "Apache 已 reload", "reloadFailed": "reload 失敗", "skippedOrphans": "已略過 {{count}} 個未認領 conf", "artifactInvalid": "無效的殘留 conf 名稱", "artifactOwned": "conf {{file}} 屬專案或獨立站", "artifactNotFound": "找不到殘留 conf：{{file}}", "artifactRemoveFailed": "無法刪除 {{file}}：{{detail}}", "artifactRemoved": "已刪除殘留 conf {{file}}", "artifactSystemPending": "已清理 dataDir；系統 Apache 副本需 YSK_EXECUTE/root 才能停用", "artifactSystemDisabled": "已停用系統站點 {{site}}", "artifactSystemFailed": "系統停用失敗：{{detail}}", "conflictProjectsOnly": "域名 {{name}} 被多個專案佔用 — 請修改其中一個專案域名", "cleanupNothing": "沒有可清理的衝突殘留 conf", "conflictOwnedKeep": "保留已擁有 conf {{file}}（同域名 {{domain}}）", "retiredOrphan": "已退役殘留 conf {{file}}（與 {{domain}} 域名衝突）" }, "btTracker": { "needExecute": "未啟用 YSK_EXECUTE — 啟動 Tracker 與對外開埠需要系統變更權限。", "startWithoutExecute": "在未啟用 YSK_EXECUTE 下啟動 Tracker — 程序可能可監聽，但不會自動開防火牆。", "alreadyRunning": "BitTorrent Tracker 已在本程序運行。", "notRunning": "BitTorrent Tracker 未運行。", "started": "BitTorrent Tracker 正在埠 {{port}} 監聽。", "startFailed": "啟動 Tracker 失敗：{{detail}}", "stopped": "BitTorrent Tracker 已停止。", "maxSeeds": "已達同時做種上限（{{n}}）。", "seedStarted": "已開始為分享 {{id}} 做種。", "seedStopped": "已停止做種。", "seedPending": "做種尚未就緒 — 請啟動 Tracker，並在需要時啟用 YSK_EXECUTE。", "notSeeding": "控制平面目前未為此外享做種。", "btNeedsTracker": "BT 分享需要運行中的 Tracker。請開啟「檔案 → BT Tracker」並啟動。", "restoreTrackerFailed": "開機還原時未能啟動 BT Tracker", "restoreDone": "BT 還原：已做種 {{seeded}}／{{attempted}}（失敗 {{failed}}）", "workerMissing": "找不到 detached worker；已改程序內啟動（隨本進程結束）", "startedDetached": "BT Tracker detached worker 已啟動（pid {{pid}}，埠 {{port}}）", "runningDetached": "Tracker 以 detached worker 運行中（pid {{pid}}）", "jobQueued": "BT torrent 建立已排入佇列（大型分享）", "jobRunning": "正在建立 BT torrent", "libraryAdded": "已將 {{name}} 加入 WebTorrent 資料庫", "libraryInspectFailed": "無法讀取此 .torrent 或 magnet", "libraryDup": "資料庫已有此 Torrent", "libraryDestBad": "儲存位置不是有效的檔案路徑", "libraryTorrentTooBig": ".torrent 檔大於 8 MiB", "libraryNotFound": "找不到此資料庫項目", "libraryPaused": "已暫停", "libraryResumed": "已繼續", "libraryRemoved": "已從資料庫移除", "libraryFilesRemoved": "已刪除下載的檔案", "libraryRestoreDone": "資料庫還原：已啟動 {{started}}／{{attempted}}（失敗 {{failed}}）", "applyTrackersDone": "已向 {{n}} 個現有 announce 套用常用 Tracker", "libraryNeedServe": "已儲存。請在面板啟動 ysk-server serve，WebTorrent 才會下載／做種。", "libraryDestIsFile": "無法建立名為 {{name}} 的資料夾——該處已有同名檔案。", "librarySeedMissing": "此資料夾沒有可做種的對應檔案。", "libraryWaitingPeers": "正在等待 peers。若檔案已在此主機，請重新加入並選使用現有檔案做種。" }, "migrate": { "orphanConfirm": "請輸入完整孤立主目錄路徑以確認刪除。", "orphanStillInStore": "該主目錄仍屬於 store 內的專案。", "orphanMissing": "磁碟沒有此路徑：{{path}}", "orphanNeedExecute": "將刪除孤立主目錄 {{path}}。需 YSK_EXECUTE=1。", "orphanRmFailed": "無法刪除孤立主目錄：{{detail}}", "orphanRemoved": "已刪除孤立專案主目錄 {{path}}。" }, "publicFiles": { "liveConf": "生效 Nginx 設定檔：{{path}}", "publicRoot": "公開根目錄：{{path}}", "confNameStale": "設定檔 {{file}} 與目前 server_name {{serverName}} 不一致。請再套用公用檔案以改名。" }, "leftover": { "staleCliTitle": "遺留舊版 CLI", "staleCli": "仍有舊 CLI：{{path}}（產品版本 {{version}}）。PATH 可能優先用它。移除：rm -f {{path}}", "apacheDefaultTitle": "Apache 遺留預設站", "apacheDefault": "Apache 000-default 仍已啟用。這只代表預設站設定檔仍在，不代表 Apache 正在聽公網 :80（產品預期 Apache 綁在 127.0.0.1:8080）。產品 overlay 不會停用此預設站。請在面板套用 Apache，或 hosting apache apply --execute。", "nginxCatchAllTitle": "Nginx 缺 catch-all", "nginxCatchAll": "/etc/nginx/conf.d 沒有 ysk-000-default.conf。未知 SNI 可能落到其他站。請執行 projects nginx-sync --execute。", "vsftpdTitle": "vsftpd 單元失敗", "vsftpd": "vsftpd 失敗。overlay 不會重寫 listen／listen_ipv6。請在面板套用 FTP。", "dovecotTitle": "Dovecot TLS 指住不存在的憑證", "dovecot": "Dovecot ssl_cert 指住不存在的 {{path}}。overlay 不會改成 ssl=no。簽發郵件憑證後套用郵件 TLS。", "staleCliRemoved": "已移除殘留 CLI {{path}}。", "staleCliRemoveFailed": "無法移除殘留 CLI {{path}}：{{detail}}", "vsftpdSslOff": "因 FTPS 憑證檔不存在，已把 vsftpd 設為 ssl_enable=NO 並重新啟動。", "dovecotSslOff": "因 {{path}} 不存在，已把 Dovecot 設為 ssl=no 並重新啟動。", "overlayDoesNotHeal": "產品 overlay 不會改寫 nginx、Apache、vsftpd 或 Dovecot。請用列出的套用命令（root + YSK_EXECUTE=1）。", "executeStaleCli": "請加 --execute（root + YSK_EXECUTE=1）以移除殘留 CLI。", "executeMissingTls": "請加 --execute（root + YSK_EXECUTE=1）以關閉缺證 TLS，讓 vsftpd／Dovecot 可以啟動。", "executeGeneric": "請加 --execute（root + YSK_EXECUTE=1）以套用上述遺留清理。", "readinessTitle": "overlay 後主機遺留", "readinessClean": "未偵測到 Apache 預設站、缺 nginx catch-all、vsftpd 失敗或舊 CLI。", "nginxRemoved": "已移除殘留 nginx 設定 {{path}}。", "nginxNotLeftover": "不是殘留 public-files 設定 — 拒絕刪除。", "nginxUnusedKeep": "000-default 是未使用，不當殘留 — 未刪除。", "nginxSystemCopy": "系統副本仍在：{{path}}。需要 YSK_EXECUTE + root 先可以移除。", "nginxReloadFailed": "移除 {{path}} 後 nginx -t 或 reload 失敗。" }, "defense": { "panelReqLabel": "面板請求／分鐘", "panelReqExcluded": "已認證面板流量 — 只顯示，不計入威脅分數", "tcpOk": "TCP {{target}} 可達", "tcpFail": "TCP {{target}} 失敗", "dnsDegraded": "DNS 路徑降級", "reqRateHigh": "公開請求速率 {{reqs}}／分鐘 ≥ {{threshold}}", "ddosHeuristic": "公開請求偏高且邊緣探測失敗" } }, "ops": { "blocked": { "needExecute": "伺服器未開啟系統變更權限，無法在管理面板完成此操作", "needExecuteShort": "未開啟系統變更權限", "needExecuteBlocked": "已封鎖：未開啟系統變更", "needRoot": "需系統管理員權限（管理員）", "needExecuteRoot": "需要 系統變更權限已開啟 與管理員權限", "needExecuteYsk": "需要 系統變更權限已開啟", "writeOutsideDataDir": "寫入被阻擋：未開啟系統變更權限，且路徑在管理資料目錄外", "nginxReload": "無法重載 Nginx：需要系統變更權限", "signal": "無法送出訊號：需要系統變更權限（系統變更權限）", "signalNote": "需要 系統變更權限已開啟 才會真 kill", "renice": "無法 renice：需要系統變更權限（系統變更權限）", "install": "伺服器未開啟系統變更權限，無法在管理面板完成安裝", "update": "伺服器未開啟系統變更權限，無法在管理面板完成更新", "panel": "無法在管理面板完成此操作" }, "honesty": { "blockedNotOk": "誠實校正：已封鎖 時不可 成功=是", "blockedNotApplied": "誠實校正：已封鎖 時不可 apply_status=已套用", "okFalseNotApplied": "誠實校正：成功=否 時不可 apply_status=已套用" }, "status": { "applied": "狀態：已套用", "failed": "狀態：失敗", "written": "狀態：已寫入", "blocked": "狀態：已封鎖" }, "notes": { "writtenSettings": "已寫入設定", "completed": "完成", "partialSuccess": "操作未完全成功", "notInstalled": "未安裝", "running": "運行中", "stopped": "已停止", "unknown": "未知" } }, "opsResult": { "title": "操作結果", "status": "狀態", "port": "埠", "url": "網址", "pid": "PID", "blocked": "無法執行", "success": "成功", "failed": "失敗", "retry": "再試", "showDetails": "詳細（{{count}}）", "hideDetails": "隱藏詳細", "stepBuildOk": "建置完成", "stepHealthOk": "健康檢查通過", "stepProcessStarted": "進程已啟動", "stepSystemdFallback": "systemd 未就緒 — 已用進程方式啟動", "stepNginxWritten": "已寫入 Nginx 設定", "stepConfigsSynced": "設定已同步至系統", "stepStoppedOld": "已停止舊進程", "stepTuningApplied": "已套用執行時調校", "stepUnitWritten": "已寫入 systemd 服務", "stepSystemdStartFailed": "systemd 啟動失敗 — 已降級為進程啟動", "portListening": "埠 {{port}} 正在監聽", "portNotListening": "埠 {{port}} 未在監聽", "httpOk": "HTTP 正常 {{status}}", "httpFail": "HTTP 失敗：{{detail}}" }, "pageGuide": { "missing": "此頁尚未提供說明內容。", "missingTitle": "暫無說明", "eyebrow": "說明", "canDoTitle": "可以做什麼", "workflowTitle": "建議流程", "notesTitle": "注意事項", "cliTitle": "CLI 速查", "cliFoot": "完整參數請執行 ysk-server --help 或參閱文件。", "relatedTitle": "相關功能" }, "playbooks": { "discover-host": { "name": "主機探索", "description": "唯讀主機清單" }, "nginx-health": { "name": "Nginx 健康檢查", "description": "檢查 nginx 服務狀態" }, "nginx-restart": { "name": "Nginx 重啟（高風險）", "description": "審批後重啟 nginx" }, "local-llm-ops-only": { "name": "僅本機 LLM 操作", "description": "防護模式下緊急探索" }, "disk-pressure": { "name": "磁碟壓力檢查", "description": "唯讀磁碟用量（df）" }, "mail-stack-status": { "name": "郵件堆疊狀態", "description": "檢查 postfix + dovecot 服務單元" }, "security-units": { "name": "安全 服務單元", "description": "fail2ban + sshd 狀態（唯讀）" }, "web-stack-status": { "name": "Web 堆疊狀態", "description": "nginx + php-fpm 探測" }, "emergency-read-only": { "name": "緊急唯讀掃視", "description": "僅防護安全事實" }, "backup-health": { "name": "備份就緒", "description": "備份就緒檢查" }, "db-stack-status": { "name": "資料庫堆疊狀態", "description": "資料庫服務狀態" }, "ssl-nginx-check": { "name": "SSL + Nginx 檢查", "description": "SSL 與 Nginx 檢查" } }, "presetChips": { "customPlaceholder": "自訂…" }, "projects": { "title": "專案", "subtitle": "", "create": "建立專案", "createHint": "有範本時會自動部署並發佈 Nginx", "empty": "尚未建立專案", "emptyHint": "按「建立專案」開始", "emptyFilter": "沒有符合的專案", "emptyFilterHint": "清除搜尋或篩選", "name": "名稱", "domain": "域名（選填）", "detail": "專案詳情", "deploy": "部署", "deployPhp": "部署 PHP", "stop": "停止", "health": "健康檢查", "publishNginx": "發布 Nginx", "publishNginxSsl": "發布 Nginx + SSL", "opsResult": "操作結果", "runtime": "執行環境", "template": "範本（選填）", "templateNone": "— 無 —", "searchPlaceholder": "搜尋名稱、域名或識別碼…", "listDesc": "管理此主機上的網站專案。", "filterAll": "全部 運行時", "statTotal": "全部", "statRunning": "運行中", "statDegraded": "降級", "statUnhealthy": "異常", "statStopped": "停止 / 就緒", "statStoppedOnly": "已停止", "statReadyOnly": "就緒", "statPendingOs": "待系統用戶", "status": { "failed": "失敗", "failedHint": "部署或健康檢查失敗 — 請查看日誌", "unhealthy": "異常", "unhealthyHint": "行程仍在但健康檢查失敗", "pendingOs": "待建立系統用戶", "pendingOsHint": "系統用戶尚未建立", "degraded": "運行中（降級）", "degradedHint": "行程已啟動，但非完整生產模式（例如非 管理員 / pidfile）", "deploying": "部署中", "published": "已發布", "publishedHint": "Nginx 設定已寫入；行程狀態可能另計", "running": "運行中", "stopped": "已停止", "ready": "已就緒", "readyHint": "已建立 — 請部署以啟動", "unknown": "未知" }, "checklist": { "title": "上線路徑", "desc": "完成以下步驟即可對外提供服務", "created": "已建立", "os": "OS 用戶", "deploy": "部署", "nginx": "Nginx", "health": "健康" }, "next": { "pendingOsTitle": "系統用戶尚未建立", "provisionOsAction": "建立系統用戶", "pendingOsBody": "此專案尚未建立獨立系統用戶。", "pendingOsActions": "可繼續部署；完整隔離需以系統管理員權限執行。", "deployTitle": "下一步：部署", "deployBody": "按上方「部署 PHP／部署」啟動 運行時，或到「部署」分頁用 Git。", "nginxTitle": "下一步：發布 Nginx", "nginxBody": "到「網絡」分頁或總覽快捷操作發布 Nginx（可選 SSL）。" }, "healthDetail": { "none": "尚未執行健康檢查", "overall": "結果", "nginxStatus": "Nginx 狀態", "nginxReloaded": "Nginx 重載", "httpStatus": "HTTP", "latency": "延遲", "error": "錯誤", "at": "檢查時間", "deployMode": "部署模式", "edgeKind": "邊緣", "goLiveOk": "上線", "goLiveAt": "上線時間", "degraded": "降級" }, "railPhp": "PHP / 站點", "railStatic": "靜態站", "sectionPhpDeploy": "PHP 部署", "sectionPhpDeployDesc": "寫入 PHP 站點／程序池，並依權限套用到系統", "sectionStaticDeploy": "靜態內容", "sectionStaticDeployDesc": "靜態站以檔案 + Nginx 為主，無 節點 行程", "staticDeployHint": "請用 Git 拉取內容，再到「網絡」發布 Nginx。", "noDomain": "未設定域名", "lastDeploy": "上次部署", "neverDeployed": "尚未部署", "created": "已建立 {{name}}", "backToList": "返回專案列表", "openUrl": "開啟網站", "openUrlNeedDomain": "請先設定域名 — 不要在瀏覽器開啟 127.0.0.1", "needOsUser": "請先到隔離分頁建立系統用戶", "goIsolation": "前往隔離分頁", "homeMissing": "主目錄不存在", "homeMissingHint": "與遷移盤點同一探測 — 請到隔離分頁建立系統用戶", "stopTitle": "停止此專案（systemd 單元與公開網站）", "deployTitle": "部署此專案", "httpStatsHint": "取自本專案 access log（最近樣本）", "httpStatsNone": "尚無本專案 access log", "notFound": "找不到此專案", "home": "主目錄", "env": "環境", "backup": "備份", "resources": "資源", "quotaUnlimited": "無配額限制", "lastHealth": "最近健康檢查", "tabOverview": "總覽", "tabDeploy": "部署", "tabApp": "應用", "tabNetwork": "網絡", "tabResources": "資源", "tabIsolation": "隔離", "tabLogs": "日誌", "tabAdvanced": "進階", "tabMore": "更多", "createGoLive": "建立後立即部署並發佈 Nginx", "createPreferredPort": "固定埠（可選）", "goLiveOk": "已部署並發佈", "goLivePartial": "已建立；部署／發佈未完成", "nginxLive": "已載入", "nginxWritten": "已寫入", "nginxNeedsDeploy": "需先部署", "nginxFailed": "發佈失敗", "netEdgeStatus": "站點狀態", "netUpstream": "上游", "netPortTitle": "進程埠", "netCurrentPort": "目前埠", "netPublishTitle": "發佈", "netConfPreview": "設定", "savePublishSsl": "儲存並發佈 + SSL", "retryLiveTitle": "上線未完成", "retryLiveBody": "部署或 Nginx 發佈未成功，可重試。", "retryDeploy": "重試部署", "retryPublish": "重試發佈 Nginx", "preferredPortRedeployHint": "儲存後需重新部署才會改進程埠", "railProcess": "行程", "railNginx": "Nginx", "railOs": "OS 用戶", "railHealth": "健康", "nginxPublished": "已發布設定", "nginxNone": "尚未發布", "osProvisioned": "已建立系統用戶", "osPending": "尚未完成 OS 隔離", "healthOk": "正常", "healthBad": "失敗", "healthUnknown": "尚未檢查", "sectionRuntimeDeploy": "運行時 部署", "sectionRuntimeDeployDesc": "依專案 運行時 啟動行程（節點 / PHP）", "sectionGit": "git", "sectionGitDesc": "Clone、同步、入站 push", "sectionEnv": "環境變數", "sectionEnvDesc": "以「名稱=值」寫入專案 .env", "gitUrl": "git 網址", "gitDeploy": "Git 部署", "envFile": "環境檔（.env）", "saveEnv": "儲存環境變數", "sectionNginx": "Nginx 與 SSL", "sectionNginxDesc": "寫入並套用網站設定", "domainHint": "建議先在建立時填域名，方便 Publish", "sectionQuota": "磁碟配額", "sectionQuotaDesc": "限制專案 主目錄 可用空間（MiB）", "sectionLimits": "CPU / 記憶體", "sectionLimitsDesc": "系統服務 資源限制；需重新 Deploy 才套用 服務單元", "quotaMb": "配額（MiB）", "memoryMax": "最大記憶體", "cpuQuota": "CPU 配額 %", "setQuota": "設定配額", "setResources": "儲存資源限制", "sectionLogs": "應用日誌", "sectionLogsDesc": "讀取專案目錄下最近 日誌 檔", "viewLogs": "載入日誌", "logsEmpty": "尚未載入日誌", "logsNoFiles": "（尚無 日誌 檔 — 請先 Deploy）", "sectionAdvanced": "其他操作", "sectionAdvancedDesc": "備份與範本內容下載", "downloadWp": "下載 WordPress", "dangerZone": "危險區域", "dangerZoneDesc": "刪除專案會移除管理紀錄與相關資源", "delete": "刪除專案", "confirmStopTitle": "停止此專案？", "confirmStopDesc": "將停止「{{name}}」的運行行程。", "confirmDeleteTitle": "刪除此專案？", "confirmDeleteDesc": "確定刪除「{{name}}」？此操作無法從介面復原。", "close": "關閉", "statProjects": "{{count}} 專案", "noProjectsShort": "尚無專案", "runtimeStatic": "靜態", "logsLoadFailed": "讀取日誌失敗", "deleteFailed": "刪除失敗", "tabAbout": "說明", "statusLabel": "狀態", "userLabel": "用戶", "nginxValuePublished": "已發布", "nginxValueNone": "未發布", "osValueReady": "已建", "osValuePending": "待建立系統用戶", "openFiles": "檔案", "enableCdn": "啟用 CDN", "openLogs": "日誌", "osUserReadyMsg": "系統用戶已就緒。{{detail}}", "osUserNeedRoot": "無法建立系統用戶：需要 系統變更權限 與管理員權限。{{detail}}", "osUserIncomplete": "系統用戶建立未完成", "saveLogDirsFailed": "儲存 日誌 目錄失敗", "createName": "專案名稱", "noPathSepHint": "名稱不可包含 / 或 \\。", "createRuntime": "執行環境", "createRuntimeHint": "之後可在詳情調整部署方式", "createVersion": "版本", "createVersionHint": "會寫入專案的執行環境版本；部署／FPM 會參考此版本", "createVersionAria": "執行環境版本", "createPrimaryDomain": "主要域名", "createPrimaryDomainHint": "可稍後再填", "createAliases": "別名", "createAliasesHint": "逗號或換行分隔", "createTemplate": "範本", "createTemplateHint": "每個執行環境只有一個 Hello World! demo；選範本會帶入對應 runtime", "createTemplateNote": "範本只寫入專案目錄骨架；需再「部署」才會 建置／啟動。", "createRuntimeNow": "目前執行環境：", "createTemplateFooter": "。可選範本加速起步，或不選直接空白專案。", "createDraftResources": "與域名一併建立草稿資源", "createNeedDomainFirst": "請先填「主要域名」，以下選項才會一併建立草稿。", "createDnsZone": "同時建立 DNS zone", "createDnsZoneDesc": "只寫管理檔（draft），不等於權威 DNS 已上線", "createMailDomain": "同時登記郵件域名", "createMailDomainDesc": "之後可到郵件頁完成郵箱與套用", "createServerIpv4": "伺服器 IPv4", "createServerIpv4Hint": "DNS／郵件範本用", "createServerIpv4Ph": "此主機公網 IPv4", "createServerIpv6": "伺服器 IPv6（可選）", "createServerIpv6Ph": "公網 IPv6（可留空）", "sshCardDesc": "登入公鑰決定誰能進來；出站身份決定這用戶出去用哪把匙。", "sshLoginKeys": "允許登入的公鑰", "sshKeyCount": "{{count}} 把", "sshOutbound": "出站身份", "sshOutboundNone": "尚未建立", "sshOutboundCreated": "已建立出站身份（私鑰已加密保存）", "sshCreateFailed": "建立失敗", "sshWriteTried": "已嘗試寫入磁碟", "sshOutboundHint": "建立出站身份後，此專案用戶可用於 git／腳本連外。", "sshCreateOutbound": "一鍵建立出站身份", "sshWriteHome": "寫入 主目錄/.ssh", "sshOpenWorkspace": "開啟 遠端登入 工作台", "sshManageLoginKeys": "管理登入公鑰", "logsSectionDesc": "掃描 日誌/、日誌/ 與額外目錄；可按檔名／內容關鍵字搜尋", "logsNameSearch": "檔名搜尋", "logsNameSearchHint": "匹配相對路徑，例如 錯誤、app.out", "logsContentKw": "內容關鍵字", "logsContentKwHint": "在各檔尾端搜尋（不是全檔全文）", "logsSearch": "搜尋", "logsRescan": "重新掃描", "logsRefreshFile": "重新整理此檔", "logsCopy": "複製內容", "logsDownloadTail": "下載尾端", "logsCenter": "日誌中心", "logsHitsTitle": "內容命中 {{count}} 個檔 — 點檔名可開尾端（含關鍵字過濾）", "logsLinesHit": "{{count}} 行命中", "logsFileCount": "日誌檔 {{count}}", "logsNameFilter": "（檔名含「{{q}}」）", "logsScanning": "正在掃描 日誌…", "logsNoneYet": "尚無日誌檔 — 部署或跑過服務後會出現；亦可設定額外目錄。", "logsNoContent": "尚無內容", "logsRelated": "相關來源", "logsRelatedDesc": "系統日誌 / nginx / PHP-FPM（詳見日誌中心）", "logsAvailable": "可用", "logsMissing": "未見", "logsOpenInCenter": "在日誌中心開啟", "logsExtraDirs": "額外 日誌 目錄", "logsExtraDirsDesc": "相對專案 主目錄 的路徑（除預設 日誌/、日誌/ 外）", "logsDirList": "目錄列表", "logsDirListHint": "一行一個；只允許 主目錄 內相對路徑", "logsReset": "重設", "logsSaveScan": "儲存並掃描", "logsDefaultNote": "預設永遠掃描 日誌/ 與 日誌/。額外目錄只收入檔名像 *.日誌 / *.out / *.err 的檔。", "resOsTitle": "系統用戶隔離", "resOsDesc": "每個專案獨立 Linux 用戶；意圖主目錄：/home/ysk-server-{專案識別碼}", "resLinuxUser": "Linux 用戶", "resOsIsolation": "OS 隔離", "resOsReady": "已就緒", "resOsNotCreated": "未建立（需系統管理員）", "resHomeDir": "主目錄 目錄", "resCanonical": "意圖路徑", "resUserMissing": "用戶不存在", "resShellLive": "即時 shell / 鎖定", "resLocked": "已鎖定", "resUnlocked": "未鎖定", "resHomeMode": "主目錄 模式", "resHomeExists": "存在 · 模式 {{mode}}", "resHomeMissing": "不存在", "resIsolationOn": "隔離中", "resIsolationPending": "待隔離", "resOsHint": "行程以專案用戶執行。建立系統用戶需 系統變更權限 與管理員權限；否則為 degraded。", "resProvisionUser": "建立／修復系統用戶", "resRefreshStatus": "重新整理狀態", "resFixHome": "修復 主目錄 擁有權", "resMigrateHome": "遷移到 /home/ysk-server-…", "resQuotaDesc": "軟配額（deploy 前 du 擋）+ 有 setquota 時可硬強制", "resQuotaHint": "例如 1024 = 1 GiB", "resSetSoftQuota": "儲存軟配額", "resLimitsTitle": "行程與帳號限制", "resLimitsDesc": "系統服務 MemoryMax / CPUQuota / TasksMax / NOFILE + shell／鎖定", "resLimitsDescSystemd": "systemd cgroup：MemoryMax / CPUQuota / TasksMax / NOFILE + shell／鎖定", "resLimitsDescPm2": "PM2：記憶體對應 max_memory_restart；其餘限額見 systemd。", "resRunnerSystemd": "進程管理：systemd", "resRunnerPm2": "進程管理：PM2", "resMemMax": "記憶體上限", "resMemHint": "例如 512M 或 1G", "resMemHintSystemd": "systemd MemoryMax（cgroup 硬頂，例如 512M 或 1G）", "resMemHintPm2": "寫入 ecosystem max_memory_restart（到額重啟，非 cgroup 硬殺）；例如 512M 或 1G", "resFieldSystemdOnly": "僅 systemd cgroup 有效；仍會存 DB，改回 systemd 部署後生效", "resCpuHint": "100 = 一顆 CPU", "resCustomPct": "自訂 %", "resTasksHint": "行程數上限", "resNofileHint": "開檔上限", "resShellHint": "預設 nologin", "resShellBashRisk": "bash · 風險", "resLockAccount": "鎖定 Linux 帳號", "resLockDesc": "usermod -L；解鎖時取消勾選", "resLimitsHint": "「儲存並套用」會寫 資料庫 並嘗試 usermod / setquota / 系統控制 set-property。無權限時只寫控制面。", "resLimitsHintSystemd": "「儲存並套用」會寫入控制面，並在有權限時套用 OS／systemd 限額。", "resLimitsHintPm2": "「儲存並套用」會寫入控制面並更新 PM2 記憶體上限。", "resSaveApply": "儲存並套用限制到 OS", "resSaveControlOnly": "僅存 Mem/CPU 到控制面", "resReapply": "再套用一次（不改表單）", "resMigrateDone": "遷移完成", "resMigrateIncomplete": "遷移未完成", "resMigrateTitle": "遷移系統用戶 主目錄？", "resMigrateDesc": "將遷移到 /home/ysk-server-{識別碼} 並建立／修復系統用戶。需要管理員權限。", "resMigrate": "遷移", "resWrittenOnly": "已寫入控制面；OS 未套用（需要管理員權限）。{{notes}}", "resAppliedOs": "限制已套用到 OS。{{notes}}", "resSaved": "已儲存", "resIncomplete": "未完成", "resApplyLimitsFailed": "套用限制失敗", "resApplied": "已套用", "resApplyFailed": "套用失敗", "resChownOk": "變更擁有者 完成", "resChownFailed": "變更擁有者 失敗", "netSavedPublished": "網絡已儲存並發布 Nginx", "netSavedOnly": "網絡設定已儲存（未發布）", "netSaveFailed": "儲存失敗", "netSuspended": "專案已暫停 — 訪客會收到 503。恢復後再發布站點。", "netDomainTitle": "域名", "netDomainDesc": "主要域名與別名；儲存後可一併寫入 Nginx 管理設定", "netPrimaryDomain": "主要域名", "netPrimaryHint": "訪客用來開啟網站的域名，例如 app.example.com", "netAliases": "別名", "netAliasesHint": "每行一個，例如 www 或 blog 子域名", "netNeedPrimary": "請先填寫主要域名", "netHttpsTitle": "HTTPS 與整站重新導向", "netHttpsDesc": "儲存後請發布 Nginx。整站 301 會蓋過 proxy／PHP／static 內容", "netForceHttps": "強制使用 HTTPS", "netForceHttpsDesc": "HTTP → HTTPS（301）；需已有 SSL 憑證並用 SSL 發布", "netHsts": "啟用 HSTS", "netHstsDesc": "瀏覽器記住只走 HTTPS（建議在強制 HTTPS 後開啟）", "netHstsNeedHttps": "請先啟用強制 HTTPS", "netRedirectUrl": "整站重新導向網址", "netRedirectHint": "可留空。填寫後整站 301 到此網址（例如搬站／apex→www）", "netBasicAuthTitle": "HTTP 基本認證（瀏覽器登入保護）", "netBasicAuthDesc": "發布時寫入 htpasswd；用戶名留空 = 關閉。密碼留空 = 沿用已存密碼", "netAuthUserHint": "留空關閉認證", "netAuthPassHint": "首次設定必填；之後不改可留空", "netAuthPassSet": "設定或更新密碼", "netCacheNote": "靜態／PHP 靜態資源預設 Cache-Control 7d；清除 清主機 nginx cache 目錄（需 系統變更權限）", "netPurgeOk": "已嘗試 清除 cache", "netPurgeFailed": "清除 失敗", "netDocrootTitle": "網站目錄（docroot）", "netDocrootDesc": "相對專案 主目錄；發布 Nginx 時會用此路徑作為 管理員（預設 app/public）", "netDocrootLabel": "文件根目錄", "netDocrootFull": "完整路徑：{{path}}", "netDocrootCustom": "自訂相對路徑…", "netAdvancedTitle": "進階與發布", "netAdvancedDesc": "綁定 IP、發布到系統 Nginx", "netCollapseBind": "收起綁定 IP", "netExpandBind": "展開綁定 IP", "netBindIp": "綁定 IP", "netBindHint": "留空 = 聽全部網卡", "netBindPh": "留空 = 聽全部；可填綁定 IP", "netNeedDomainSave": "請先填寫並儲存主要域名", "ovUsed": "已用", "ovQuota": "配額", "ovQuotaUnset": "未設", "ovQuotaStatus": "配額狀態", "ovOverQuota": "超額", "ovQuotaOk": "正常", "ovDocroot": "文件根目錄", "ovAccessSample": "Access 樣本", "ovLines": "{{count}} 行", "ovDailyDays": "日統計天數", "ovDailyTitle": "訪問日統計（最多 60 日）", "ovDailyDesc": "由 access 日誌 樣本滾動記錄", "ovQuickTitle": "站點快捷操作", "ovQuickDesc": "發布與備份（主部署請用頁頂按鈕或「部署」分頁）", "ovNeedNetworkDomain": "請先到「網絡」分頁設定域名", "ovPublishNginx": "發布 Nginx", "ovPublishSsl": "發布 Nginx + SSL", "ovBackupProject": "備份本專案", "ovOpenFiles": "開啟專案檔案", "ovNoDomainHint": "未設定域名 — 請到「網絡」分頁設定後再發布站點。", "ovPublishNote": "發布會寫入管理設定；真正 重新載入 系統 Nginx 需系統變更權限。", "ovStatic": "靜態", "ovAliases": "別名", "ovForceOn": "強制", "ovForceOff": "不強制", "advFtpCreated": "FTP {{user}} 已建立（草稿，需到 FTPS 頁套用）", "advCreateFailed": "建立失敗", "advFtpFailed": "FTP 建立失敗", "advMaintTitle": "維護操作", "advMaintDesc": "備份、暫停／恢復、選用工具", "advBackupProject": "備份本專案", "advOneClickWp": "一鍵 WordPress（下載+設定）", "advSuspendedHint": "暫停中：進程已停、訪客會收到 503。", "advSuspendHint": "暫停會停止進程並將站點改為 503 維護頁。", "advFtpTitle": "專案 FTP（路徑 Jail）", "advFtpDesc": "帳戶限制在專案 app 目錄；建立後請到 FTPS 服務頁套用", "advFtpUserHint": "可留空，系統自動產生", "advFtpPassHint": "至少 8 個字元", "advDangerTitle": "危險區域", "advDangerDesc": "刪除專案無法從介面復原，請確認已備份。", "advDelete": "刪除專案", "deployPyHint": "預設 venv + pip；ASGI 用 uvicorn，Django 用 gunicorn。", "deployGoHint": "預設：go 建置 -o app . 後啟動 ./app；可略過建置若二進位已存在。", "deployRustHint": "預設：cargo 建置 --release 後啟動 目標/release/{crate}；可略過建置。", "deployNodeHint": "依 節點 啟動行程（entry 預設 伺服器.js）；生產環境建議 系統服務。", "deployDefaultHint": "依 運行時 啟動；套用後才對外。", "deployOsStep": "獨立 Linux 用戶 + /home/ysk-server-{專案識別碼}（資源分頁可建立）", "deployPyReady": "Python 執行環境已就緒", "deployPipNet": "有 requirements.txt 時需外網 pip", "deployCheckPort": "部署後檢查埠與 /health", "deployPublishProxy": "發布 Nginx 反代", "deployToolchainReady": "{{runtime}} toolchain 已就緒", "deployFirstBuild": "首次部署會 建置（可能較久）", "deployNeedBinary": "建置 成功後才有可執行檔", "deployPhpFpmOk": "PHP-FPM 版本正確", "deployPhpPool": "部署 PHP／套用 程序池", "deployNginxSsl": "發布 Nginx + 可選 SSL", "deployPublicContent": "確認 public/ 有內容", "deployNetPublish": "到「網絡」發布 Nginx", "deployConfirmToolchain": "確認執行環境頁已安裝對應 toolchain（或主機已有）", "deployConfirmCode": "確認 app/ 內有程式碼（範本或 Git）", "deployPressDeploy": "按「部署」啟動；成功後到「網絡」發布 Nginx", "deployVersionSaved": "已儲存 {{runtime}} 版本 {{version}}（部署時會用此版本）", "deployVersionSaveFailed": "儲存 運行時 版本失敗", "deployInstallingToolchain": "正在安裝／確認 toolchain…", "deployToolchainIncomplete": "Toolchain 安裝未完成（權限或網絡）；可改手動到執行環境頁", "deployToolchainDone": "Toolchain 步驟完成，開始部署…", "deployToolchainFailed": "安裝 toolchain 失敗", "deployChecklistTitle": "建立完成 — 部署檢查清單", "deployChecklistDesc": "{{runtime}} 專案骨架已就緒；完成下列步驟才會對外服務", "deploySectionTitle": "{{runtime}} 部署", "deploySectionDesc": "依 {{runtime}} 啟動行程（埠／系統服務 或 pidfile）", "deployPhpVersion": "PHP 版本", "deployPhpVersionHint": "本站使用的 PHP 版本（需主機已安裝對應 FPM）", "deployRuntimeVersion": "{{runtime}} 版本", "deployRuntimeVersionHint": "寫入專案後部署會用此版本；安裝請到執行環境頁", "deployRuntimeVersionCreateHint": "建立時寫入；部署時參考", "deployRuntimeVersionGeneric": "運行時 版本", "deployEntry": "啟動 entry", "deployEntryHint": "可留空用預設（{{hint}}）；會同步到伺服器", "deploySkipBuild": "略過建置", "deploySkipBuildHint": "已有 venv／二進位時可勾選，加快重啟（會記住本機偏好）", "deployPort": "· 埠 {{port}}", "deployFpmApplied": "已套用 PHP-FPM 程序池", "deployFpmIncomplete": "FPM 未完成", "deployFpmNote": "會寫入站點／程序池 設定；真正 重新載入 需系統變更權限。", "deployBuildNote": "建置／啟動失敗會在操作結果顯示原因，不會假裝成功。entry 會寫入伺服器；略過建置另存本機偏好。", "deployPhpIniTitle": "專案 php.ini 覆寫", "deployPhpIniDesc": "只填要改的鍵；空白＝沿用全域（執行環境 → PHP → php.ini）。部署／套用 FPM 時寫入 php_admin_*", "deployPhpIniExample": "例如 256M；留空用全域", "deployGlobal": "全域", "deployCustom": "自訂", "deployOff": "關", "deployOnCareful": "開 · 慎", "deployPhpIniSaved": "已儲存專案 php.ini 覆寫；請再部署或套用 FPM", "deployHistory": "部署歷史（{{count}}）", "deployHistoryDesc": "來自操作稽核；newest first", "deployGitUrlHint": "HTTPS 或 git@host:org/repo.git", "deployEnvHint": "每行一項：名稱=值；# 開頭為註解", "resume": "恢復專案", "suspend": "暫停專案", "goFtpsApply": "前往 FTPS 服務套用", "toolchainNote": "安裝 toolchain ≠ 專案已上線；部署成功 ≠ Nginx 已對外（需在「網絡」發布）。", "installToolchainDeploy": "安裝 toolchain 並部署", "deployOnly": "僅部署", "openRuntime": "開啟 {{runtime}} 執行環境", "later": "稍後再說", "installToolchainDeployShort": "裝 toolchain 並部署", "runtimeEnv": "{{runtime}} 環境", "applyFpmPool": "套用 FPM 程序池", "staticNginxHint": "靜態站以「發布 Nginx」為主 — 請到「網絡」或總覽快捷操作。", "fullIniLink": "完整目錄與 opcache／工作階段 等請到", "phpIniLink": "PHP 執行環境 → php.ini", "savePhpIniOverride": "儲存 php.ini 覆寫", "scaffoldNote": "若 app/ 為 YSK 範本佔位（含 .ysk-scaffold），會先清除再 clone；已有自訂內容會拒絕覆寫。", "saveOnly": "只儲存", "savePublishNginx": "儲存並發布 Nginx", "needDomainToPublish": "填寫主要域名後才可發布站點。", "savePublish": "儲存並發布", "saveAuth": "儲存認證", "cacheZoneNote": "完整 FastCGI／proxy_cache zone 需主機 nginx.設定檔 先定義 keys_zone；面板提供 best-effort 清除。", "purgeNginxCache": "清除 Nginx cache", "nginxManageFile": "Nginx 管理檔：", "publishRuntimeNote": "發布會依 運行時 產生 proxy／PHP-FPM／static 設定檔（含認證、導向與 docroot）", "publishStored": "用已存設定發布", "publishStoredSsl": "用已存設定 + SSL", "publishNote": "「發布」寫入管理 設定檔；同步到 /etc/nginx 並 重新載入 需系統變更權限。", "hitsFiles": "內容命中 {{count}} 個檔 — 點檔名可開尾端（含關鍵字過濾）", "logFilesCount": "日誌檔 {{count}}", "defaultScanNote": "預設永遠掃描 日誌/ 與 日誌/。額外目錄只收入檔名像 *.日誌 / *.out / *.err 的檔。", "opsOk": "{{label}}完成{{url}}", "opsOkWithNote": "{{label}}完成：{{note}}{{url}}", "opsFail": "{{label}}失敗：{{reason}}", "railPython": "Python 行程", "railGo": "Go 行程", "railRust": "Rust 行程", "railNode": "節點 行程", "runtimeName": { "php": "PHP", "node": "Node.js", "static": "靜態", "python": "Python", "go": "去", "rust": "Rust", "java": "Java", "kotlin": "Kotlin", "bun": "包子" }, "netCacheTitle": "快取", "logsDeepAccess": "日誌中心 · access", "logsDeepError": "日誌中心 · error", "logsDeepNginxUnit": "Nginx 服務日誌", "logsPresetAccess": "篩選 access.log", "logsPresetError": "篩選 error.log", "railJava": "Java 進程", "railKotlin": "Kotlin 進程", "railBun": "Bun 進程", "deployProcessManager": "進程管理", "deployProcessManagerSystemd": "systemd（推薦）", "deployProcessManagerPm2": "PM2", "proc_restart": "重啟", "proc_stop": "停止", "proc_reload": "重新載入", "procControlsHint": "進程控制（{{manager}}）", "procActionOk": "{{action}} 成功 · {{notes}}", "procActionFail": "{{action}} 失敗 · {{notes}}", "procActionFailShort": "進程操作失敗", "procMissingUser": "專案無 Linux 用戶，無法操作 PM2", "deploySystemdHint": "生產預設：unit ysk-project-*.service、開機自啟、cgroup 限額跟專案資源。", "deployPm2Hint": "用 pm2 start ecosystem（需已裝 PM2 plugin）。進程見「執行環境 → 進程」PM2 表。部署前會停舊 runner，避免搶埠。", "deleteDialogTitle": "永久刪除專案", "deletePermanent": "永久刪除", "deleteRemoveFiles": "刪除磁碟 home 與 Linux 用戶", "deleteTypeName": "輸入專案名稱以確認", "deletedOk": "專案已刪除", "sslRequiredFirst": "尚未有此網域的 SSL 證書。請先到「SSL 證書」申請／上載，再按發佈 + SSL。", "sslGateHint": "SSL 相關按鈕已鎖定：請先到", "sslGateHint2": "為網域申請／上載證書後再發佈 + SSL。", "netPublishPrimary": "基本", "netPublishSsl": "HTTPS/SSL", "netPublishMaint": "維護", "sslNeedDomain": "請先填寫網域，才能發佈 Nginx / SSL。", "createTemplateMissing": "未載入 {{v0}} 範本；請重新整理或選「— 無 —」空白專案。", "deleteDialogDesc": "將銷毀「{{name}}」。此操作無法還原。", "deleteWillStop": "停止 systemd / PM2 / 本機進程", "deleteWillWeb": "移除 Nginx conf、PHP-FPM pool、Apache vhost（如有）", "deleteWillOs": "刪除 Linux 用戶與 home 目錄（安全路徑）", "deleteKeepOs": "保留 home 與 Linux 用戶（僅面板移除）", "deleteWillDb": "從控制面資料庫移除專案", "deleteRemoveFilesDesc": "取消勾選則只從面板移除，檔案與系統用戶保留", "deleteTypeNameHint": "請輸入「{{name}}」", "deleteDnsWarn": "共享 DNS zone / 郵箱 domain 不會自動刪除。", "manageInNginx": "在 Nginx 管理", "advFtpHomeApp": "網站 app 目錄", "advFtpHomeRoot": "專案家目錄（全部）", "advFtpManage": "開啟 FTP 頁", "resShell": "登入 shell", "resSaveHint": "「儲存並套用」會改主機。「僅存控制面」只記表單。「再套用」用已存值再寫入系統。", "resBashConfirmTitle": "允許互動式 bash？", "resBashConfirmDesc": "這會讓專案用戶有互動登入 shell。只在需要以該用戶 SSH 或終端機時才確認。", "createGitHint": "可選。會記在專案；到部署分頁再 clone（建立時不會 clone）。", "gitTokenLaterHint": "HTTPS token 與 clone depth 請在建立後於部署分頁設定。", "gitBranch": "分支", "gitBranchHint": "從遠端揀分支或 tag。", "gitBranchAfterUrl": "請先填寫 Git 網址。留空則使用遠端預設分支。", "gitLastRef": "上次同步：{{branch}} @ {{commit}}", "gitConfirmTitle": "要 clone 到此專案？", "gitConfirmBody": "若 app/ 仍是 Hello World 佔位會先清除再 clone。非 YSK 範本的自訂檔案會拒絕覆寫。", "gitConfirmRemoteBody": "會把 origin 改為新網址再 pull。歷史無關則失敗；不會清除自訂檔案。", "runtimeActual": "實際 binary {{path}}", "runtimeFallback": "所選 {{version}} 並未安裝。行程實際使用 {{path}}。", "gitSync": "同步", "gitFetch": "抓取（fetch）", "gitCheckout": "切換分支（checkout）", "gitReset": "重設到遠端", "gitResetNeedConfirm": "需確認 — 會捨棄本機提交", "gitDeepen": "抓完整歷史", "gitLogTitle": "最近 commit", "gitDirtyTitle": "本機改動已阻止 pull", "gitDirtyBody": "有 {{count}} 個檔與 Git 不同（Files 或應用改過）。請丟棄或取消。", "gitDiscard": "丟棄本機檔", "gitOpenFiles": "在 Files 開啟", "gitNotCloned": "尚未 clone", "gitClean": "乾淨", "gitDirty": "有改動", "gitBehind": "落後 {{count}}", "gitAhead": "超前 {{count}}", "gitDetached": "已釘選", "gitShallow": "淺層", "gitMissing": "沒有 git", "gitResetConfirmTitle": "要 hard reset 到遠端？", "gitResetConfirmBody": "會丟棄本機 Git 歷史及未追蹤檔（保留 .env），再用控制面資料還原 .env。", "gitHeads": "遠端分支", "gitToken": "HTTPS 令牌", "gitTokenHint": "加密存放。不會寫入 remote URL。", "gitTokenPlaceholder": "ghp_… 或 glpat-…", "gitTokenSet": "已設 token", "gitSaveToken": "儲存 token", "gitClearToken": "清除 token", "gitDeployKey": "部署公鑰", "gitDeployKeyHint": "請以唯讀 deploy key 加到 Git 主機。", "gitDeployKeyOn": "部署金鑰", "gitMakeKey": "建立 deploy key", "gitCopyPub": "複製 public key", "gitClearKey": "清除 deploy key", "gitKeyCopied": "已複製 public key", "gitPinHost": "釘選 host key", "gitPinHostBody": "尚未釘選 {{host}}。請核對 fingerprint，再釘選後才用 SSH clone。", "gitHostUnpinned": "未釘選 host key", "gitHookTitle": "推鉤", "gitHookHint": "自行把 URL 貼到 GitHub／Gitea／GitLab（只收 push）。不是 Slack。", "gitHookOn": "已開", "gitHookOff": "已關", "gitHookEnable": "開啟", "gitHookRotate": "更換 secret", "gitHookDisable": "關閉", "gitHookSecretOnce": "請立即複製此 secret——之後不會再顯示。", "gitHookCopyUrl": "複製", "gitHookCopySecret": "複製 secret", "gitHookCopied": "已複製", "gitHookSetup": "Payload URL 用上方網址。Content type：application/json。事件只選 push。Secret 用啟用時顯示的值。", "gitHookGithub": "Settings → Webhooks → Add webhook。Content type：application/json。Events：Just the push event。GitHub.com 需要 HTTPS。", "gitHookGitea": "Settings → Webhooks → Add Webhook → Gitea。方法 POST。事件：Push。", "gitHookGitlab": "Settings → Webhooks。Trigger：Push events。Secret token 填 hook secret（X-Gitlab-Token）。", "gitHookHonesty": "主機 unit 需 YSK_EXECUTE=1，否則 hook 只回計劃。", "gitHookSkipOther": "其他分支會被忽略。", "gitAuthHttps": "HTTPS 令牌", "gitAuthSsh": "SSH 部署金鑰", "gitLoadRefs": "載入分支", "gitRefDefault": "遠端預設", "gitRefBranches": "分支", "gitRefTags": "標籤", "gitRefOther": "其他 ref…", "gitRefCustom": "Commit 或 ref", "gitRefsNeedUrl": "請先填網址。", "gitRefsNeedAuth": "請先儲存 token 或 deploy key，再載入分支。", "gitRefsHint": "來自遠端清單，請選擇。", "gitHookSetupToggle": "如何貼到 Git 平台", "gitHookOneLiner": "HMAC 或 X-YSK-Git-Hook。只同步本專案 ref。", "gitHookExecuteHint": "真正 clone／部署需 YSK_EXECUTE=1。", "gitShowKey": "顯示金鑰", "gitHideKey": "隱藏", "gitBehindShort": "↓{{計數}}", "gitAheadShort": "↑{{計數}}", "gitDirtyShort": "有改動 · {{count}}", "gitFilesLink": "文件", "netForceHttpsOn": "發佈邊緣後，HTTP 會跳轉到 HTTPS。", "netForceHttpsOff": "未儲存強制跳轉。", "netBoundCert": "已綁定憑證", "netBoundCertExpiry": "到期 {{at}}", "netNoBoundCert": "此主機名磁碟上沒有憑證", "netForceHttpsNeedCert": "強制 HTTPS 前，請先在 /ssl 為此域名簽發憑證。", "netHttpsLiveNotForced": "已有邊緣設定檔，HTTPS 可能已生效。此項只控制是否強制 HTTP→HTTPS。", "gitSyncBlockedDirty": "有本機改動時無法同步。請先檢視 diff，或以重設丟棄後再同步。", "gitViewDiff": "檢視 diff", "nameInvalid": "請用小寫名稱：以英文字母開頭，其後可為字母、數字或連字號（最長 31 字）。", "deployVersionMissing": "此主機未安裝 Node {{version}}。請改選已安裝的版本，或先安裝此版本。", "deployUsedBinary": "本次部署使用 {{path}}" }, "protection": { "levels": { "low": { "label": "正常", "verb": "系統平穩", "hint": "維持日常防護即可" }, "elevated": { "label": "偏高", "verb": "有異常跡象", "hint": "建議切到「加固」並留意可疑 IP" }, "under_attack": { "label": "受攻擊", "verb": "疑似正在受攻擊", "hint": "立即套用「受攻擊」檔 + 批量封禁" }, "critical": { "label": "危急", "verb": "威脅嚴重", "hint": "考慮緊急檔；確認白名單有你" } }, "presetsWhen": { "daily": "日常營運", "hardened": "掃描／暴力", "under_attack": "L7 爆量", "emergency": "最後手段" }, "note": { "notApplied": "未套用到系統（需 管理員權限與系統變更權限已開啟）— 已記到管理設定", "nginxWritten": "已寫入 Nginx 限速管理檔", "f2bWritten": "已寫入 fail2ban 管理設定", "hintDropped": "已略過內部防護提示", "nginxLimits": "將寫入 Nginx 限速片段" }, "rel": { "justNow": "剛剛", "minutesAgo": "{{n}} 分鐘前", "hoursAgo": "{{n}} 小時前" }, "apiUnreachable": "無法連線 介面（Web proxy／後端可能未啟動）", "geoipLoadFailed": "載入 GeoIP 失敗", "loadFailed": "載入失敗", "previewDone": "預覽完成（未寫入）", "presetApplied": "已套用防護檔", "manualBan": "手動封禁", "banSent": "已送出封禁 {{ip}}", "quickSelectBan": "快速選取封禁", "bulkBan": "批量封禁 {{count}} 個", "autoBanStatus": "自動 封鎖：{{onOff}} · {{mode}} · {{method}}", "autoBanUpdated": "已更新自動 封鎖", "automationMaster": "自動化主開關：{{onOff}}", "autoPresetStatus": "自動防護檔：{{onOff}}", "autoBanAutomation": "自動 封鎖：{{onOff}}（{{mode}}）", "automationSaved": "已儲存自動化設定", "statFirewall": "防火牆", "statSuspects": "可疑 IP", "statSuspectsSplit": "可操作 {{actionable}}／全部 {{total}}", "suspectActionableCount": "可操作 IP {{count}}", "scoreBasisHint": "威脅分計入防火牆、fail2ban 封禁量與請求速率，與情報分頁的可疑清單不是同一計數。", "statAutoBan": "自動 封鎖", "statApply": "系統套用", "statActiveBans": "活躍封禁", "statPreset": "防護檔", "threatPill": "威脅 {{label}} · {{score}} 分", "reprobed": "已重新探測", "loadingStatus": "載入防護狀態…", "tabs": { "command": "應變", "automation": "自動化", "bans": "封禁", "geo": "IP 准入", "stack": "底層", "intel": "情報", "about": "說明" }, "reapply": "重新套用", "nginxLimits": "Nginx 限速", "notWritten": "未寫", "modeValue": { "normal": "正常", "degraded": "降級", "ddos-protection": "DDoS 防護", "offline": "離線" }, "mode": "模式", "controlPlane": "控制面", "canApply": "可套用", "needRoot": "需要管理員權限", "writeOnly": "只寫檔", "autoRunning": "運作中 · 間隔 {{sec}}s · 本小時 封鎖 {{n}}", "autoOffManual": "關閉 — 只人手操作", "lastTick": "· 上次 {{t}}", "nextTick": "· 下輪 {{t}}", "on": "開", "off": "關", "open": "開啟", "ranAutomationTick": "已跑一輪自動化", "escalateHardened": "加固 ≥ 分數", "escalateAttack": "受攻擊 ≥ 分數", "deescalateDaily": "回落日常 < 分數", "zeroOff": "0 關", "holdAfterEscalate": "升檔後最少維持", "min5": "5 分", "min15": "15 分", "min30": "30 分", "hour1": "1 時", "hour2": "2 時", "hour6": "6 時", "presetOrCustom": "預設檔 / 自訂", "autoBanMode": "自動封禁模式", "soft": "寬鬆", "normal": "標準", "aggressive": "積極", "custom": "自訂", "method": "方式", "banMethod": "封禁方式", "both": "兩者", "scoreGte": "分數 ≥", "hitsGte": "請求 hits ≥", "hits429Gte": "429 相關 hits ≥", "scanHitsGte": "掃描路徑 hits ≥", "cooldown": "冷卻", "maxPerHour": "每小時上限", "scanInterval": "掃描間隔", "schedulerDefault": "scheduler 預設 120s", "collapse": "收起", "expand": "展開", "step": "步驟", "mechanism": "機制", "youCanTune": "你可調", "probe": "探測", "probeSignals": "外網／請求率／TCP／f2b／UFW", "escalateThreshold": "升檔門檻", "emergency": "緊急", "neverAuto": "永不自動", "manualEmergency": "人手 EMERGENCY", "signalNetworkDown": "外網斷", "signalHighReq": "高請求率", "signalDdos": "DDoS 啟發式", "signalTcp": "TCP 連線", "signalUfwOff": "UFW 關閉", "signalF2bBans": "fail2ban 封禁數", "weightHint": "{{label}} 權重 0–3", "detected": "（已偵測）", "notSet": "（未設定）", "zonesComma": "Zones（逗號分隔）", "underAttackRequested": "已請求 Under Attack", "underAttackCleared": "已請求解除 UA", "autoBanOpen": "已開 · {{mode}} · 本小時 {{n}}/{{max}}", "autoBanClosed": "關閉 — 只靠手動／列表", "pausedNoExecute": "· 暫停（無 執行）", "circuitOpen": "· 已熔斷", "autoBanModeLabel": "自動 封鎖 模式", "scanned": "已掃描", "bulkOps": "批量操作", "fromAccessLog": "來自 access 日誌 · 一鍵或批量封禁", "noSuspectIps": "暫時無可疑 IP", "noSuspectDesc": "有掃描／429 流量時會自動出現。亦可展開手動封禁。", "whitelistPlus": "白名單 + {{ip}}", "whitelistAdded": "已加入白名單", "activeBansTitle": "活躍封禁 ({{count}})", "activeBansDesc": "防護中心彙總 · 解封經 defense 介面（同 fail2ban-客戶端）", "source": "來源", "unbanned": "已解封", "noBans": "未有封禁", "noBansDesc": "封禁後顯示於此", "collapseQuickAdd": "收起快加", "quickAddOne": "快加一條", "removeItem": "移除 {{w}}", "updated": "已更新", "ipOrCidr": "IPv4／IPv6 或 CIDR", "autoBanWhitelistAdded": "已加入 auto-封鎖 白名單", "added": "已加入", "banIpPlaceholder": "要封禁的 IPv4 或 IPv6", "reason": "原因", "scanBrute": "掃描 / 暴力", "noSignals": "尚無訊號", "pressReprobe": "按重新探測", "points": "分", "noTopIps": "暫無 Top IP", "topIpsAfterLog": "有 日誌 後會顯示", "noManagedVhost": "無 managed vhost", "afterPresetMarker": "套用防護檔後會注入 marker", "injected": "已注入 YSK_DEFENSE", "notInjected": "未注入", "noEvents": "暫無事件", "eventsAfterOps": "套用／封禁後出現", "geoipUpdated": "GeoIP 庫已更新", "dbReady": "庫就緒", "stale": "過舊", "older7d": ">7 日", "lastSuccess": "上次成功", "downloaded": "已下載", "missing": "缺失", "geoMode": "Geo 准入模式", "denyList": "封鎖名單", "allowListHighRisk": "允許名單 · 高危", "autoUpdateDb": "自動更新庫", "countriesSelected": "國家（已選 {{n}}）", "searchCountry": "搜尋中文名或 ISO", "countryPlaceholder": "中國 / CN", "regionsSelected": "省／州（已選 {{n}}）", "regionsHint": "依已選國家顯示；可自訂 CN-GD", "pickCountryFirst": "建議先選國家以收窄列表", "customRegion": "自訂，例 CN-GD", "regionPlaceholder": "廣東 / CA / 東京", "continentsSelected": "大陸（已選 {{n}}）", "continentsHint": "洲際（可選）", "continentPlaceholder": "亞洲 / EU", "asnsSelected": "供應商 ASN（已選 {{n}}）", "asnsHint": "雲／ISP；可自訂 ASN", "customAsn": "自訂 ASN，例 13335", "asnPlaceholder": "Cloudflare / 電信", "cityExample": "例：CN|Shenzhen 或 US|Ashburn", "policySaved": "政策已儲存 · 國 {{c}} · 省 {{r}} · ASN {{a}}", "ipPolicySaved": "IP 准入政策已儲存", "nginxGeoWritten": "已寫入 nginx geo 片段", "ipAddress": "IP 位址", "lookupPlaceholder": "要查詢的 IPv4 或 IPv6", "wouldBlock": "會攔截 · {{reason}} · {{matched}}", "wouldAllow": "放行 · {{reason}}", "lookupDone": "Lookup 完成", "item": "項目", "value": "值", "country": "國家", "region": "省／州", "city": "城市", "continent": "大陸", "coords": "座標", "provider": "供應商", "policy": "政策", "block": "攔截", "allow": "放行", "matched": "命中", "applyStricterTitle": "套用「{{name}}」？", "applyStricterDesc": "可能開啟自動封鎖。請確認白名單有你的 IP。請核對以下變更。", "confirmEmergencyTitle": "確認緊急防護檔", "confirmEmergencyDesc": "緊急檔會極度限速。請確認白名單有你的 IP，並輸入 EMERGENCY。", "confirmString": "確認字串", "applyEmergency": "套用緊急檔", "sectionPreset": "防護檔", "sectionAutoPreset": "① 自動防護檔", "sectionAutoBan": "② 自動封禁", "unban": "解封", "ban": "封禁", "banConfirmTitle": "封禁 {{ip}}？", "banConfirmMethod": "方法：{{method}}", "banConfirmUntilUnban": "會一直維持，直至你解除封禁（或 fail2ban 到期）。", "banConfirmDesc": "此 IP 會在主機上被封鎖。請確認不是目前面板或工作階段來源。", "wlRemovedUndo": "已從白名單移除 {{ip}}。5 秒內可復原。", "undo": "復原", "banSelectedConfirmTitle": "封禁已選 {{count}} 個 IP？", "banSelectedConfirmDesc": "以下地址會在主機上被封鎖：{{ips}}", "save": "儲存", "yes": "是", "no": "否", "oneClickSuggested": "一鍵套用建議檔", "stackApply": "套用防護組合（UFW、fail2ban、建議檔）", "stackApplyDone": "已要求套用防護組合", "stackApplyHint": "會啟用 UFW 並套用 fail2ban 與建議防護檔。遠端面板請先確認不會把自己鎖在外面。", "viewPresets": "檢視防護檔", "suspectIpsCount": "可疑 IP {{count}}", "goBans": "去封禁", "singleEntryPrefix": "單一入口：", "singleEntryBody": " ", "emergencyNeverAuto": "緊急檔永不自動", "writeOnlyBanner": "唯寫模式：系統套用需 EXECUTE=1 與 root。", "readiness": "就緒探測", "goTo": "前往", "presetGuide": "", "active": "作用中", "recommended": "建議", "useCarefully": "慎用", "preview": "預覽", "stackToolsSee": "底層工具見「底層」分頁 ·", "readinessCheck": "就緒檢查", "automationMasterLabel": "自動化主開關", "runOneTick": "立即執行一輪", "suggestEmergencyBanner": "分數極高 — 系統建議緊急檔，但不會自動套用。請到應變人手確認。", "autoPresetDesc": "依威脅分自動切 日常／加固／受攻擊。緊急檔永不自動。", "allowDeescalate": "允許自動回落（降檔）", "autoBanThresholdHint": "選 soft/normal/aggressive 會自動填閾值；選「自訂」先可改分數／hits。無 系統變更權限 時只會記錄，不會真 封鎖。", "sectionMechanism": "③ 機制說明", "lastNotes": "上次：{{notes}}", "sectionWeights": "④ 訊號權重（0–3）", "weightsDesc": "預設 1；加大會令該類訊號更容易推高威脅分。細範圍用單選，不用手填數字。", "needCfToken": "需環境變數 CF_API_TOKEN", "cfOnEscalate": "。升至「受攻擊」或人手套用該檔時可打 介面。", "ufwOnlyCf": "受攻擊時 UFW 只放 CF 網段（+遠端登入）", "ufwOnlyCfHint": "會重設 UFW 並只允許 Cloudflare IP；需系統變更權限。", "saveZones": "儲存 zones", "uaNow": "立即 Under Attack", "uaClear": "解除（→ high）", "stackRoleNote": "UFW 與 fail2ban 是防護中心底下的工具頁（不再佔側欄一級）。側欄只保留本頁。", "fwUfwTitle": "防火牆 UFW", "fwStats": "埠策略 · 永久 DENY · 允許 {{allow}} · 拒絕 {{deny}}", "fwRulesProfiles": "UFW 規則與設定檔", "f2bStats": "日誌臨時 封鎖 · {{jails}} jails · 封鎖中 {{banned}}", "jailsWhitelistPolicy": "Jail · 白名單 · 策略", "divisionTitle": "分工一覽", "divisionUfw": "UFW = 開哪個埠、永久拒哪個 IP", "divisionF2b": "fail2ban = 掃 日誌 之後臨時 封鎖", "divisionDefense": "本頁應變／自動化 = 攻擊時總控（限速檔 + 自動 封鎖 + 可疑列表）", "autoBanLabel": "自動 封鎖", "scanOnce": "掃一次", "selectedIps": "已選 {{count}} 個 IP", "banSelected": "封禁已選", "suspectIps": "可疑 IP", "selectAll": "全選", "alreadyBanned": "已封禁", "whitelist": "白名單", "bansWorkflow": "攻擊應變：可疑列表 → 封禁／解封。Jail 策略、ignoreip、服務生命週期見", "f2bTool": "fail2ban 工具", "noSecondJail": "（不在這裡再做第二套 jail 編輯）。", "autoBanWhitelistTitle": "自動 封鎖 白名單", "autoBanWhitelistDesc": "防護中心自動封鎖豁免（會同步 fail2ban ignoreip.txt）。完整 ignoreip 在 fail2ban 工具 → 白名單。", "ufwOff": "UFW（未啟用）", "ufwOffHint": "UFW 未運行 — 可用目標是 fail2ban。", "whitelistSyncHint": "面板 {{n}} 條 · fail2ban ignoreip 同步：{{sync}}", "whitelistSyncOn": "開", "whitelistSyncOff": "關（兩邊清單可能不一致）", "ignoreipWhitelist": "ignoreip 白名單", "notSetSuggestAdmin": "未設定（建議加入你的管理 IP）", "moreItems": "… 還有 {{n}} 項 · 見 fail2ban 白名單", "add": "加入", "manualBanTitle": "手動封禁", "methodFollows": "方式沿用上方選擇（fail2ban / UFW）", "preferSuspectList": "多數情況用可疑列表即可。", "threatSignals": "威脅訊號", "scoreSource": "分數來源 · 權重可調", "accessAuthSample": "access + auth 樣本", "fullLogsAt": "完整 nginx／auth 日誌 請到", "logCenter": "日誌中心", "colScore": "分", "colHits": "次數", "col429": "429", "topIpsTitle": "熱點 IP", "hitsCount": "{{n}} 次", "sampleWindowHint": "計數來自目前 access 與 auth 樣本視窗，不是完整日誌檔。", "banShort": "封", "vhostLimits": "Vhost 限速", "eventStream": "事件流", "eventKind": { "preset": "防護檔", "auto_preset": "自動切檔", "cloudflare_ua": "Cloudflare", "ban": "封禁", "unban": "解封" }, "hours48": "48 小時", "geoipDb": "GeoIP 資料庫", "refreshStatus": "重新整理狀態", "updateDbNow": "立即更新庫", "geoipSourceHint": "預設本機 GeoIP 資料庫；可選 IPinfo token。", "retry": "重試", "loadingGeoip": "載入 GeoIP 狀態…", "nextScheduledUpdate": "排程下次更新：{{at}}", "statusNotLoaded": "尚未載入狀態", "load": "載入", "accessPolicy": "准入政策", "enable": "啟用", "freeGranularity": "免費最高細分：國家 + 省／州 + ASN；城市可選政策（預設關，準確率較低）。供應商 = ASN。Whitelist 永遠豁免。點 chip 移除。", "allowListDanger": "允許名單模式高危：不在名單的公網 IP（含未知 geo）會被擋。請確認管理端 IP 已加入封禁頁 whitelist。", "dailySchedule": "每日排程", "cityPolicy": "城市政策（低置信 · 可選）", "useCityAccess": "用城市做准入", "cityPolicyHint": "免費庫城市準確率有限。格式 CN|Guangzhou；未勾選時城市只作查詢展示。", "noCitiesYet": "尚未加入城市", "savePolicy": "儲存政策", "applyNginxSnippet": "套用 Nginx 片段", "nginxSnippetHint": "需 nginx geoip2 模組才可在 HTTP 層攔截。", "testIp": "測試 IP", "lookup": "查詢", "plusCountry": "+ 國家 {{v}}", "plusRegion": "+ 省 {{v}}", "plusCity": "+ 城市 {{v}}", "lastTickPrefix": "· 上次 {{t}}", "nextTickPrefix": "· 下輪 {{t}}", "cannotBanSelf": "不可封鎖 {{ip}} — 這是本機、你的登入 IP 或 ignoreip", "selfIp": "本機", "selfHostIp": "主機 IP", "selfLoginIp": "你的登入 IP", "showZeroScore": "顯示 0 分", "hideZeroScore": "隱藏 0 分", "freshnessNa": "不適用", "freshnessMissing": "無庫", "freshnessStale": "過舊", "freshnessFresh": "最新", "geoDraftOnly": "政策未啟用 — 儲存只寫草稿，Nginx 不會執行，直至你勾選啟用。", "uaNeedZones": "請先設定 Cloudflare zone", "geoNeedDb": "尚未有本地 GeoIP 庫 — 請先更新 MMDB 檔", "selectAllCountriesWarn": "封鎖名單模式下全選全部國家？這可能把本機與你的登入所在地一併封鎖。", "badgeRecommendPreset": "以目前威脅水平，建議改用更強預設", "badgeAutomationOn": "自動化已開啟", "badgeBanCount": "目前封鎖數", "badgeGeoOn": "Geo 准入政策已啟用", "badgeGeoNotReady": "GeoIP 資料庫尚未就緒", "badgeIntelSignals": "目前計分的訊號數", "signalActive": "運作中", "signalInactive": "未啟用", "signalJails": "{{n}} 個 jail", "dbReadyHint": "已有 MMDB 檔", "dbNotReadyHint": "請先下載 GeoIP 資料庫", "staleHint": "上次成功更新是否已超過 7 日", "draftBadge": "草稿", "banIsSelf": "此 IP 是目前面板來源或本機。", "banNotSelf": "此 IP 不是目前面板來源。", "geoSourceLocal": "本機 GeoIP 庫（sapics + DB-IP）", "nginxPreviewHint": "此預設會寫入的 Nginx 片段（僅預覽）：" }, "publicFiles": { "notSet": "未設定", "quota": "配額", "reloadOnApply": "套用時", "path": "路徑", "fileManager": "檔案管理", "overview": "概覽", "overviewDesc": "即將套用的設定（唯讀摘要）", "serverName": "伺服器名稱", "reloadNginx": "重載 Nginx", "reloadTry": "套用時嘗試", "siteSettings": "站點設定", "siteSettingsDesc": "寫入管理 設定檔；套用時可嘗試 重新載入 Nginx（套用後才可連）", "serverNameHint": "Nginx server_name，例如 files.example.com", "notes": { "noManagedConf": "尚未有受管 Nginx 設定 — 請按套用", "notSynced": "管理檔已寫入，但未進入 /etc/nginx/conf.d — 需 root 與 YSK_EXECUTE 再套用並重載" }, "quotaMiB": "配額（MiB）", "quotaHint": "可選：限制公用目錄總量。選「不限」會停用 MiB 欄。", "unlimited": "不限", "quotaInvalid": "請輸入正整數 MiB，或選「不限」。", "serverNameRequired": "請填寫伺服器名稱。", "serverNameInvalid": "請用主機名、萬用字元或 IP，不可含空白或標點。", "applyHint": "套用成功只代表設定已寫入；DNS、SSL 與防火牆需另行就緒才會對外服務。", "appliedOk": "已套用公用檔案站點", "applyReload": "套用並重載 Nginx", "statusLive": "Nginx 已生效", "statusDraft": "草稿／待套用", "statusManagedOnly": "僅管理檔", "statusNotApplied": "未套用", "nginxLive": "已在 conf.d", "nginxNotLive": "未進 conf.d", "openSite": "開啟網站", "notLiveHint": "域名 404 多數是 conf 只寫在 dataDir、未複製到 /etc/nginx/conf.d，或未 reload。請用 root + YSK_EXECUTE 再套用。未發 SSL 前連結用 http://；已有憑證則用 https://。", "diskRoot": "磁碟根目錄", "executeFlag": "執行", "asRoot": "根目錄", "filesInRoot": "項目數", "managedConf": "管理 conf", "systemConf": "系統 conf.d", "autoindex": "目錄列表（autoindex）", "liveSystemConf": "現行系統設定檔：{{path}}", "publicRootNote": "公開根目錄：{{path}}", "applyConfirmTitle": "套用公用檔案站點？", "applyConfirmDesc": "寫入 Nginx server_name {{name}} 並重載 Nginx。", "serverNameMismatch": "現行設定檔為 {{live}}；表單為 {{draft}}。套用後會覆蓋。", "liveName": "生效名稱", "draftName": "草稿名稱", "draftUnapplied": "此草稿尚未套用。Nginx 仍以生效名稱對外。", "discardDraft": "捨棄草稿" }, "rbac": { "permissions": "權限", "permissionsDesc": "按角色加減能力；系統有預設，可一鍵還原。", "rolePolicy": "角色政策", "dirty": "已自訂", "factory": "系統預設", "maxLevel": "最高等級", "save": "儲存政策", "saved": "已儲存 {{role}} 權限政策", "restoreRole": "還原此角色預設", "restoreAll": "還原全部角色", "restoreRoleTitle": "還原 {{role}} 為系統預設？", "restoreRoleDesc": "將清除此角色的自訂能力，回復出廠設定。", "restoreAllTitle": "還原全部角色為系統預設？", "restoreAllDesc": "所有角色的自訂政策都會被清除。", "restoredRole": "已還原 {{role}}", "restoredAll": "已還原全部角色預設", "bandAllOn": "全開", "bandAllOff": "全關", "diffFromFactory": "與預設不同", "effectivePreview": "有效能力預覽", "userOverrides": "個人加減", "extraGrants": "額外授予", "extraRevokes": "額外撤銷", "restoreUserOverrides": "還原此用戶覆寫", "restoreUserOverridesTitle": "清除 {{name}} 的個人權限覆寫？", "restoreUserOverridesDesc": "只清除額外授予／撤銷，角色政策不變。", "overridesBadge": "有覆寫", "promoteAdminTitle": "提升為 管理員？", "promoteAdminDesc": "管理員 預設可管理用戶、改權限、模擬登入、還原備份等。請確認。", "level": { "read": "讀取", "write-low": "低危寫入", "write-high": "高危寫入", "destructive": "破壞性", "privilege": "特權" }, "cap": { "dashboardRead": "總覽", "logsRead": "日誌", "metricsRead": "監控指標", "projectsRead": "專案（讀）", "mailRead": "郵件（讀）", "dnsRead": "DNS（讀）", "sslRead": "SSL（讀）", "backupsRead": "備份（讀）", "updatesRead": "更新（讀）", "servicesRead": "服務（讀）", "firewallRead": "防火牆（讀）", "approvalsView": "審批（查看）", "usersSelf": "個人設定／雙重驗證", "projectsWrite": "專案建改", "mailWrite": "信箱／別名", "dbWrite": "資料庫建立", "sslUpload": "上傳憑證", "filesProject": "專案檔案", "approvalsRespond": "審批處理", "cronManage": "定時工作 管理", "servicesControl": "服務控制", "updatesApply": "套件更新執行", "dnsApply": "DNS 套用", "sslIssue": "簽發 SSL", "publishApply": "發佈／Nginx", "firewallEdit": "防火牆編輯", "mailApply": "郵件套用", "runtimeTuning": "運行時調參", "mysqlConsoleWrite": "MySQL 寫入", "projectsDelete": "刪除專案", "dbDrop": "刪除資料庫", "backupsRun": "執行備份", "backupsRestore": "備份還原", "firewallFlush": "清空防火牆", "logsPurge": "清除日誌", "usersManage": "用戶管理", "packagesManage": "方案管理", "usersImpersonate": "模擬登入", "securityPolicy": "安全政策", "rbacPolicy": "權限政策", "settingsSystem": "系統設定", "auditExport": "審計匯出", "securityApiKeysAdmin": "介面 金鑰管理", "networkBrowse": "主機代瀏覽", "networkVnc": "VNC 遠端桌面管理", "validatorsRead": "驗證者節點（讀取）", "validatorsManage": "驗證者節點管理", "validatorsWipe": "驗證者節點清空資料", "dockerRead": "Docker（讀取）", "dockerManage": "Docker 管理", "dockerWipe": "Docker 刪除／清理" }, "aboutRoles": "角色說明（出廠預設）", "aboutRolesBody": "角色決定預設權限；用戶可再覆寫個別能力。", "aboutQuota": "配額說明", "aboutQuotaBody": "方案配額目前以面板／主機總量為主閘，並非完整多租戶硬隔離。用量列若顯示 主機 totals，即代表全機統計。", "dangerPolicyTitle": "授予破壞性／特權能力？", "dangerPolicyDesc": "你正為此角色加入 destructive 或 privilege 能力，或提高 maxLevel。請確認風險後再儲存。", "needRbacPolicy": "需要 rbac.policy 先可以編輯角色政策。", "adminLockedFull": "管理員 全開（鎖定）", "adminLockedHint": "管理員 系統角色永遠功能全開，不可以削減。請改 Operator／Viewer／代理，或對非 管理員 用戶做個人加減。", "maxLevelHint": "高於此等級的能力組會自動鎖定，無法開啟。", "capabilities": "能力清單", "capabilitiesHint": "勾選此角色可用的功能。橙點表示與系統預設不同。", "enabledCount": "已開 {{enabled}}／{{total}}", "bandAboveMax": "高於最高等級", "roleUnavailable": "此角色不可用", "dirtyHint": "已自訂（與系統預設不同）", "unsaved": "未儲存", "unsavedHint": "此角色有未儲存變更", "nothingToSave": "沒有要儲存的變更", "saveRole": "儲存「{{role}}」政策", "discardTitle": "捨棄變更？", "discardDesc": "未儲存的權限變更將會捨棄。" }, "readiness": { "cat": { "core": "控制面", "security": "權限與安全", "binaries": "系統軟件", "hosting": "執行環境", "dns": "域名系統", "email": "郵件", "isolation": "專案隔離", "ops": "運維" }, "level": { "ready": "就緒", "degraded": "降級", "missing": "缺少", "unknown": "未知" }, "severity": { "critical": "關鍵", "recommended": "建議", "optional": "可選" }, "fix": "修復", "passed": "通過", "checkFailed": "就緒檢查失敗", "gatePass": "門檻通過 · {{pct}}%", "gateBlocked": "未通過／有阻擋 {{n}}", "gateFail": "尚未達標 · {{pct}}%", "executeOn": "已開", "executeOff": "未開", "blockers": "阻擋", "blockersHint": "「阻擋」是「缺少」中的關鍵項，不是額外檢查。", "requireAdminTotp": "要求管理員雙重驗證政策", "listenBind": "監聽位址", "item": { "admin2fa": "管理員雙重驗證" }, "dataDirPerms": "面板資料目錄權限", "mode750": "權限 750", "totalChecks": "全部檢查", "totalChecksHint": "就緒＋降級＋缺少＝此總數。阻擋是缺少項裡的關鍵子集。", "probing": "探測中…", "reprobe": "重新探測", "exportReport": "匯出報告", "firstBlocker": "處理首個阻擋", "viewRecommended": "檢視建議項", "loadingProbe": "正在探測主機能力…", "priorityTab": "優先修復", "checklistTab": "完整清單", "summaryTab": "摘要與快捷", "priorityTitle": "優先修復", "prioritySub": "按建議順序處理；修好阻擋後再重新探測", "nItems": "{{count}} 項", "noHardBlockers": "無硬阻擋", "noHardBlockersTitle": "沒有硬阻擋項", "prodGate": "生產門檻", "gatePassed": "已通過", "gateMaybePerm": "仍可能因權限未達標", "viewDegradedHint": "可檢視「降級」建議項（郵件、DNS、可選 運行時）。", "viewDegraded": "查看降級項", "fullChecklist": "完整檢查清單", "showing": "顯示 {{shown}} / {{total}} 項", "filterAria": "狀態篩選", "all": "全部", "category": "類別", "allCategories": "全部類別", "searchPh": "標題、說明、識別碼、修復提示…", "quickCatAria": "快速類別", "noMatchTitle": "沒有符合的項目", "noMatchDesc": "試清除搜尋或改篩選條件。", "resetFilters": "重設篩選", "summary": "摘要", "shortcuts": "快捷入口", "opsShortcutsAria": "運維捷徑", "scHost": "主機設定", "scHostD": "hostname · 電源 · NTP", "scUnit": "控制面 服務單元", "scUnitD": "系統服務 安裝／啟用", "scServices": "服務矩陣", "scServicesD": "nginx · 資料庫 · 生命週期", "scMetrics": "主機指標", "scMetricsD": "負載 · 記憶體 · 告警", "scProtection": "防護中心", "scProtectionD": "應變 · UFW · fail2ban", "policyNote": "政策：郵件 PTR／埠 25／域名商 DNS 永不自動宣稱完成。HTTP 503 = 未達標但仍有完整報告（非假成功）。", "notProbedTitle": "尚未探測", "notProbedDesc": "按「重新探測」開始唯讀就緒檢查。", "runCheck": "執行就緒檢查", "reportFormatError": "就緒報告格式錯誤", "checkFailedHttp": "就緒檢查失敗（{{status}}）", "itemAdminPassword": "管理員密碼強度", "itemAdminPasswordWeak": "{{count}} 個管理員仍標 must_change_password／不安全 初始化 — 上線前請更改", "itemAdminPasswordOk": "管理員帳戶無 初始化／弱密碼旗標", "itemAdminPasswordFix": "請到帳號安全或用戶頁更改管理員密碼", "itemListenBind": "控制平面監聽綁定", "itemListenBindPublic": "可能對外監聽（0.0.0.0/::）。建議 127.0.0.1 + 反向代理／防火牆", "itemListenBindLoopback": "建議 loopback 綁定（預設 127.0.0.1）", "itemDataDirPerms": "dataDir 權限", "itemDataDirWorldW": "請將 dataDir chmod 750（或 700），並 變更擁有者 給面板用戶", "itemDataDirOtherR": "建議 dataDir chmod 750，避免其他用戶讀取控制平面 JSON", "itemRustToolchain": "Rust 工具鏈", "itemWebBuildFix": "按「立即修復」建置 Web 介面（本機需有 monorepo），或執行：pnpm --filter ysk-server-web build", "itemWebBuildManual": "本機無 monorepo／無已打包 SPA，無法一鍵修復。請在有源碼的機器執行 pnpm --filter ysk-server-web build，再將 apps/web/dist/* 複製到 dataDir/web（例如 /var/lib/ysk-server/web），或設定 YSK_WEB_ROOT 後重啟控制面。", "itemStateStore": "控制平面狀態儲存", "itemStateStoreSqliteHint": "可選：YSK_STORE=sqlite 使用 WAL document store", "itemBackupFreshness": "最近完整備份", "itemBackupNone": "未記錄 last_backup_run — 請執行 backup all 或設定排程", "itemBackupFix": "ysk-server 全部備份 · 備份計畫 --install", "itemFleetSessions": "機群 代理 工作階段", "itemFleetNone": "單機可選：多邊緣需 agent run + 心跳", "itemFleetNoHb": "已註冊但無 心跳 — 請啟動邊緣 代理", "itemPdnsutil": "pdnsutil（PowerDNS）", "apachePort80Title": "Apache 與公開 80 埠", "apachePort80Detail": "Apache 正在監聽 :80，Nginx 未佔用公開 HTTP — 與「Nginx 作邊緣」拓撲衝突。", "apachePort80Both": "Apache 與 Nginx 同時出現在 :80 監聽 — 請將 Apache 改綁 127.0.0.1:8080。", "apachePort80Ok": "Apache 運作中但未獨佔公開 :80（拓撲可接受）。", "apachePort80Fix": "於安裝腳本已有 rebind；可停用 Apache 佔用 80 的 vhost，或 systemctl reload 後確認 ss -lntp。", "fixNow": "立即修復", "fixFailed": "修復失敗", "fixDone": "已修復 dataDir 權限（chmod 750）", "fixDoneWebUi": "已建置／安裝 Web 介面", "rootLabel": "超級用戶", "exportStarted": "正在下載 {{name}}", "techDetails": "技術詳情", "missingOwner": "未指定面板擁有者（套餐配額歸屬）", "notOsProvisioned": "待建立系統用戶", "isolationPendingOs": "與專案狀態相同：待建立系統用戶。請到隔離分頁建立系統用戶與主目錄。", "ondrejNone": "未偵測到 ondrej Launchpad PHP 來源", "ondrejFound": "發現與 packages.sury.org 衝突的舊 ondrej/php 來源：{{paths}}", "ondrejTitle": "PHP apt 來源（ondrej 殘留）", "systemctlActive": "服務運行中", "systemctlStatus": "服務狀態：{{status}}", "binInPath": "路徑中的 {{bin}}", "leftoverApache": "Apache 預設站殘留", "leftoverVsftpd": "vsftpd 單元失敗", "leftoverCli": "殘留舊 CLI", "leftoverNginx": "Nginx catch-all 缺失", "leftoverDovecot": "Dovecot TLS 憑證缺失", "leftoverOther": "主機殘留", "leftoverApply": "套用殘留修復", "isolationOwnerDegrades": "缺少擁有者會影響套餐配額歸屬 — 狀態為降級，不是就緒。" }, "redis": { "neverExpire": "永不過期", "ttlSeconds": "{{ttl}} 秒", "ttlMinutes": "{{n}} 分鐘", "ttlHours": "{{n}} 小時", "ttlDays": "{{n}} 天", "typeString": "字串", "typeHash": "雜湊", "typeList": "列表", "typeSet": "集合", "typeZset": "有序集合", "keysLoadFailed": "無法載入鍵列表", "writeFailed": "寫入失敗", "saved": "已儲存", "deleted": "已刪除", "offline": "離線", "connections": "連線數", "totalKeys": "總鍵數", "writable": "寫入", "connected": "已連線", "notConnected": "未連線", "keys": "鍵", "selected": "選中", "softwareMissing": "Redis 所需軟件尚未安裝", "notConnectedTitle": "尚未連上 Redis", "installThenStart": "請先使用上方橫幅一鍵安裝 Redis，再啟動服務。", "installedNotConnected": "服務已安裝但未連上，請啟動服務後即可瀏覽鍵與內容。", "keysCountSuffix": "· {{n}} 個鍵", "searchPlaceholder": "搜尋鍵名，例如 user:* 或 *", "searchKeys": "搜尋鍵", "scanHint": "使用 SCAN，不是 KEYS。最多回傳 {{n}} 個鍵 — 大型庫勿用 *。", "scanCapped": "只顯示首 {{n}} 個符合項。", "rows": "{{n}} 筆", "content": "內容", "noMatchingKeys": "沒有符合的鍵", "dbEmpty": "資料庫 {{db}} 目前是空的。", "noMatchPattern": "沒有符合「{{pattern}}」的鍵。", "opsResult": "操作結果", "addStringKey": "新增字串鍵", "writeToDb": "寫入 Redis 資料庫 {{db}}（即時生效，請謹慎）", "keyName": "鍵名", "keyNameHint": "建議用冒號分層，例如 session:user:1", "ttlLabel": "過期時間（秒）", "ttlHint": "可留空表示永不過期", "m1": "1 分", "m5": "5 分", "h1": "1 時", "d1": "1 日", "d7": "7 日", "customSeconds": "自訂秒數", "stringValue": "字串值，會以 SET 寫入", "stringContent": "字串內容", "deleteKeyTitle": "刪除此鍵？", "deleteKeyDesc": "確定從資料庫 {{db}} 刪除「{{key}}」？此操作無法復原。", "installedOk": "Redis 已安裝", "startedOk": "Redis 已啟動", "memory": "記憶體", "addKey": "新增鍵", "dbLabel": "資料庫 {{i}}", "keysInDb": " · {{n}} 個鍵", "dbOptionKeys": "資料庫 {{i}} · {{n}} 個鍵", "dbOptionEmpty": "資料庫 {{i}} · 空", "dbRange": "共 {{n}} 個庫（0–{{max}}）。", "serviceLink": "在服務設定加減數量", "dbsWithData": "有資料的庫（快捷）", "keysShort": "{{k}} 鍵", "keyList": "鍵列表", "pickKey": "從左側選擇一個鍵，即可查看內容。", "ttlPrefix": "過期：{{ttl}}", "writeLiveHint": "此操作直接寫入執行中的 Redis，無法從面板一鍵還原。", "refPath": "參考：{{path}}", "dbEmptyMark": " · 空", "noRequirepass": "已開保護模式，但 requirepass 為空或未能讀取，目前沒有密碼。", "insecureShort": "不安全（無密碼）", "setRequirepass": "設定密碼", "generateRequirepass": "產生並套用密碼", "generateRequirepassTitle": "產生 Redis 密碼？", "generateRequirepassDesc": "會寫入 requirepass 並重啟 Redis。密碼只顯示一次。主機變更需要 EXECUTE。", "generateRequirepassDone": "已套用 Redis 密碼", "generatedOnce": "已產生密碼（只顯示一次）：{{password}}", "rdbOnlyLossHint": "AOF 已關、RDB 仍開：重啟或崩潰可能丟失最近寫入。", "dirDataContainer": "/data（容器）", "dirHostDefault": "/var/lib/redis", "dirDefaultInstance": "/var/lib/redis/default", "dirDataWarn": "/data 多用於容器；面板無法確認此主機是否存在該路徑。", "saveOff": "關閉快照（不建議）", "saveOffWarn": "空的 save 字串會關閉 RDB 快照。若 AOF 亦關，崩潰可能丟失全部資料。", "dirMoveWarn": "更改資料目錄不會搬移 dump.rdb／AOF。下次啟動會直接用新路徑。", "passwordUnset": "服務未設定", "passwordSetHidden": "已設定（不顯示）" }, "resources": { "created": "已建立", "updated": "已更新", "deleted": "已刪除", "applyDone": "套用完成", "applyIncomplete": "套用未完成" }, "roles": { "admin": "管理員", "operator": "操作員", "viewer": "檢視者", "agent": "代理人" }, "runtime": { "probed": "已探測", "notProbed": "未探測", "probe": "探測", "read": "已讀取", "targetVersion": "目標版本", "nodeMissing": "Node.js 尚未安裝", "probeResult": "探測結果", "readonly": "唯讀", "installNode": "安裝 Node.js", "needExecuteAdmin": "需系統變更權限與管理員", "nodeMajor": "Node 主版本", "nodeMajorHint": "LTS 建議 20 或 22；與專案運行時對齊", "installedNode": "已安裝 Node {{version}}", "installPm2": "安裝 PM2", "installPm2Desc": "一鍵 npm install -g pm2（專案進程管理）。需先有 Node.js。", "installPm2Btn": "一鍵安裝 PM2", "reinstallPm2": "重新安裝 PM2", "installedPm2": "已安裝 PM2", "pm2Status": "PM2 狀態", "pm2Ready": "已就緒", "pm2MissingShort": "未安裝", "pm2NeedNodeFirst": "請先安裝 Node.js，再安裝 PM2。", "pm2InstallHint": "以 root／系統變更權限執行 npm -g 安裝；安裝後專案可選 PM2 部署。", "pm2ReadyHint": "PM2 已在 PATH；專案部署可使用 PM2 進程模式。", "opsResult": "操作結果", "unlimited": "無限", "zeroUnlimited": "0 無限", "m24": "24 分", "h1": "1 時", "d1": "1 日", "d7": "7 日", "phpIniLoadFailed": "載入 php.ini 失敗", "loaded": "已載入", "default": "預設", "phpMissing": "PHP 尚未安裝", "overview": "總覽", "fpmSites": "FPM / 站點", "tools": "工具", "about": "說明", "installPhp": "安裝 PHP", "versionAlreadyInstalled": "版本 {{version}} 已在主機上，無需再安裝", "installedVersionBtn": "已安裝 {{version}}", "newerVersionAvailable": "目前 {{current}}；面板支援更新版本：{{newer}}（可選後安裝）", "switchToNewer": "改選 {{version}}", "installedVersionsHint": "已偵測：{{list}}", "phpInstallHint": "需系統變更權限與管理員；可勾選常用擴充（套件名隨版本變：php8.2-mysql、php8.3-gd…）", "phpVersion": "PHP 版本", "phpExtHint": "選擇要一併安裝的擴充。不同 PHP 版本對應不同 apt 套件名（例：php8.2-mysql ≠ php8.3-mysql）。GD 即舊稱 gd2。", "phpExtSelect": "PHP 擴充 / 插件", "phpExtSelectHint": "套件會裝成 php{{version}}-…；核心 FPM/CLI 必裝；已裝項目不會出現在勾選清單", "phpExtRequired": "必裝（核心）", "phpExtRecommended": "常用預設", "phpExtSelectAll": "全選擴充", "phpExtCoreOnly": "只裝核心", "phpExtSearch": "搜尋擴充（mysql、gd、redis…）", "phpExtEmpty": "無符合的擴充", "pluginsSelect": "常用工具 / 插件", "pluginsSelectHint": "勾選後與執行環境一併安裝（例如 Node 的 PM2、Python 的 Poetry）", "pluginsSearch": "搜尋工具（pm2、poetry、maven…）", "pluginsEmpty": "無符合的工具", "pluginsRecommended": "常用預設", "pluginsSelectAll": "全選可安裝", "pluginsNone": "不安裝工具", "pluginsInstallNote": "勾選後按「安裝選定工具」。首次裝 runtime 時可連工具一齊裝；已裝 runtime 請只按上方按鈕。", "installPluginsOnly": "安裝選定工具（{{version}} 已有）", "installExtOnly": "安裝選定擴充（PHP {{version}} 已有）", "pluginAlreadyOnHost": "主機已有", "installAddonsOnly": "安裝選定插件／擴充（{{version}} 已有）", "remoteNewerHint": "已裝 {{current}} · 上游最新 {{remote}}{{source}}", "installedPhp": "已安裝 PHP {{version}}", "nextSteps": "下一步", "suggestedFlow": "建議流程", "globalPhpIni": "全域 php.ini", "globalPhpIniDesc": "每一列一個設定值（表單）。寫入管理檔後可「套用到系統」或於專案部署注入 程序池", "managePath": "管理檔路徑", "loading": "載入中", "probing": "探測中", "noBinaryPath": "沒有二進位路徑", "hostDefaultError": "主機預設不可用", "pm2Tick": "{{at}} · 專案 {{projects}} · PM2 {{pm2}} · 運行 {{run}}", "cannotLoadSettings": "無法載入設定表", "reloadFailed": "重新載入失敗", "sensitive": "敏感設定，請小心", "on": "開啟", "off": "關閉", "customNumber": "自訂數字", "customExample": "自訂，例 768M", "advancedExtra": "進階：額外鍵與 raw", "advancedExtraDesc": "catalog 未列的指令；每行一項：名稱=值；raw 直接附加到 ini 尾", "extraDirectives": "額外指令", "extraDirectivesHint": "每行一項：名稱=值（非上方表單已有的鍵）", "rawAppend": "直接附加到 ini 檔末尾", "phpIniSaved": "已儲存 php.ini", "appliedSystem": "已套用到系統", "demoVhost": "系統工具：示範 vhost / Pool", "demoVhostDesc": "進階／除錯用；日常開站請到 專案 → 部署", "domain": "網域", "domainRequired": "套用 vhost 前請填寫有效網域。", "vhostServerName": "虛擬主機 server_name", "poolName": "Pool 名稱", "poolNameHint": "手填識別名（示範）；專案路徑會用 ysks_* 用戶", "enableReload": "啟用並重載服務", "enableReloadHint": "需要系統變更權限；關閉則只寫管理檔", "applyFailed": "套用失敗", "phpVhostApplied": "已套用 PHP vhost / 程序池", "composerTools": "Composer / WP-命令列 / 模組", "composerToolsDesc": "即時探測 路徑 上工具與 php -m（唯讀）", "toolsProbed": "已探測工具", "notFound": "未找到", "available": "可用", "moduleCount": "模組數", "installNodeV": "安裝 Node {{v}}", "installPhpV": "安裝 PHP {{v}}", "installPythonV": "安裝 Python {{v}}", "installGoV": "安裝 Go {{v}}", "installRustV": "安裝 Rust {{v}}", "pythonMissing": "Python 尚未安裝", "goMissing": "Go 尚未安裝", "rustMissing": "Rust／cargo 尚未安裝", "tuneLoadFailed": "載入調校失敗", "availableCount": "{{n}} 可用", "notDetected": "未探測到", "binaryPath": "二進位路徑", "targetMissing": "目標版本未安裝", "targetMissingHint": "目標 {{version}} 不在本機。請改綁已安裝的版本，或先安裝此版本。", "target": "目標", "tune": "調校", "loadedShort": "已載", "host": "主機", "tabOverviewInstall": "總覽", "tabTune": "執行調校", "probeReadonlyInstall": "唯讀 · 安裝成功後請再探測確認", "hostDefault": "主機預設", "panelSupport": "面板支援", "ready": "已就緒", "notDetectedYet": "尚未偵測到", "install": "安裝", "installHint": "需系統變更權限與管理員；安裝 toolchain ≠ 專案已對外", "panelTune": "面板調校", "panelTuneDesc": "寫入管理檔；部署時注入 env", "bindVersion": "綁定版本", "onePerRow": "每列一項設定", "zeroAll": "0 全", "custom": "自訂", "extraEnv": "額外環境變數", "extraEnvHint": "每行一項：名稱=值", "customEnv": "自訂 env", "envPreview": "Env 預覽", "envPreviewDesc": "儲存後／上次載入的合併結果", "unsupported": "不支援", "tuneSaved": "已儲存調校", "nodeDetectedHint": "主機上已偵測到 Node；重裝會依權限執行，可能覆蓋現有安裝。", "nodeProbeAfter": "安裝完成後請再「重新探測」確認路徑與版本。", "installNodeVBtn": "安裝 Node {{version}}", "installPhpVBtn": "安裝 PHP {{version}}", "phpIniSteps1": "在 php.ini 分頁設計全域數值並儲存", "phpIniSteps2": "可選：套用到系統（寫入 /etc/php/…/conf.d，需要管理員權限）", "phpIniSteps3": "專案部署時會把合併後 ini 寫入 FPM 程序池 的 php_admin_*", "phpIniSteps4": "專案可再覆寫個別鍵（專案 → 部署）", "phpIniNote": "變更會先存到面板 dataDir；「套用到系統」才複製到 /etc/php 並 重新載入 FPM。專案 程序池 會在部署時注入 php_admin_value。", "phpIniLoading": "正在讀取 php.ini 設定表單…", "phpIniEmpty": "catalog 為空 — 請重新載入或確認 介面 已啟動。", "reloadForm": "重新載入表單", "savePhpIni": "儲存 php.ini", "prodUseProjects": "生產站請用「專案」路徑", "prodPathDesc": "：建立 PHP 專案 → 部署／套用 FPM（程序池 = 專案 Linux 用戶 + 隔離 主目錄）。本頁是", "systemDemo": "系統級 demo／工具", "demoNotBind": "（手填 程序池 名），不會自動綁專案隔離。php.ini 全域預設請用「php.ini」分頁。", "applyOkWritten": "套用成功 = 檔案已寫入（已寫入）。生產請優先用專案部署，確保 用戶=專案 Linux 用戶。", "applyPhpVhost": "套用 PHP vhost / 程序池", "applyPhpVhostTitle": "需確認 — 會寫入 pool／vhost 檔", "applyPhpVhostDesc": "將寫入 {{pool}} 程序池與 {{domain}} vhost。重載服務：{{reload}}。", "reprobeTools": "重新探測工具", "pressReprobe": "按「重新探測工具」載入", "installNodeLabel": "安裝 Node {{v}}", "installPhpLabel": "安裝 PHP {{v}}", "installPythonLabel": "安裝 Python {{v}}", "installGoLabel": "安裝 Go {{v}}", "installRustLabel": "安裝 Rust {{v}}", "readShort": "已讀", "pressReprobeHost": "按「重新探測」載入主機版本矩陣", "installScriptNote": "寫入安裝腳本後，有權限才會真正執行。調校在「執行調校」分頁；重新部署專案後才進行程。", "envNote": "Node：max-old-space-size 等會合成 NODE_OPTIONS。Go／Python／Rust 對應官方環境變數。", "saveTune": "儲存調校", "pressReprobeLoad": "按「重新探測工具」載入", "installJavaLabel": "安裝／更新 OpenJDK", "installKotlinLabel": "安裝／更新 Kotlin", "installBunLabel": "安裝／更新 Bun", "javaMissing": "未偵測到 Java（OpenJDK）", "kotlinMissing": "未偵測到 Kotlin 編譯器", "bunMissing": "未偵測到 Bun", "phpIniCatalog": { "groups": { "resource": { "title": "資源限制", "description": "記憶體、執行時間與輸入限制" }, "upload": { "title": "上傳與 POST", "description": "檔案上傳與 POST 體積" }, "session": { "title": "工作階段", "description": "工作階段儲存與 cookie" }, "error": { "title": "錯誤與日誌", "description": "顯示錯誤、記錄與報告等級" }, "opcache": { "title": "OPcache", "description": "位元碼快取" }, "security": { "title": "安全與路徑", "description": "遠端檔案、暴露資訊、函式禁用" }, "locale": { "title": "時區與字元" }, "misc": { "title": "其他常用" } }, "fields": { "memory_limit": { "label": "記憶體上限", "hint": "例如 128M、256M、512M、-1（無限）" }, "max_execution_time": { "label": "最長執行時間", "hint": "秒；0 = 無限（命令列）" }, "max_input_time": { "label": "最長輸入時間", "hint": "秒；解析請求的最長時間" }, "max_input_vars": { "label": "最多輸入變數", "hint": "$_GET / $_POST / $_COOKIE 變數上限" }, "max_input_nesting_level": { "label": "輸入巢狀層級" }, "file_uploads": { "label": "允許上傳檔案" }, "upload_max_filesize": { "label": "單一檔案上限" }, "post_max_size": { "label": "POST 體積上限", "hint": "應 ≥ 單一檔案上限" }, "max_file_uploads": { "label": "單次最多檔案數" }, "session_save_handler": { "label": "工作階段儲存方式" }, "session_gc_maxlifetime": { "label": "工作階段存活秒數", "hint": "秒" }, "session_cookie_httponly": { "label": "Cookie 僅 HTTP（HttpOnly）" }, "session_cookie_secure": { "label": "Cookie 僅 HTTPS（Secure）", "hint": "HTTPS 站點建議開啟" }, "session_use_strict_mode": { "label": "工作階段嚴格模式" }, "display_errors": { "label": "顯示錯誤（畫面）", "hint": "生產環境請關閉" }, "display_startup_errors": { "label": "顯示啟動錯誤" }, "log_errors": { "label": "記錄錯誤到日誌" }, "error_reporting": { "label": "錯誤報告等級", "hint": "或整數如 32767" }, "error_log": { "label": "錯誤日誌路徑", "hint": "留空用系統預設；可填絕對路徑" }, "opcache_enable": { "label": "啟用 OPcache" }, "opcache_enable_cli": { "label": "命令列啟用 OPcache" }, "opcache_memory_consumption": { "label": "OPcache 記憶體（MB）", "hint": "單位：MB" }, "opcache_interned_strings_buffer": { "label": "字串 intern 緩衝（MB）" }, "opcache_max_accelerated_files": { "label": "最多快取檔案數" }, "opcache_validate_timestamps": { "label": "檢查檔案變更", "hint": "生產可關並手動重載" }, "opcache_revalidate_freq": { "label": "檢查間隔（秒）" }, "allow_url_fopen": { "label": "允許 URL 當檔案開啟" }, "allow_url_include": { "label": "允許 URL include" }, "expose_php": { "label": "暴露 PHP 版本標頭" }, "open_basedir": { "label": "open_basedir 路徑限制", "hint": "留空不限制；多路徑用 : 分隔" }, "disable_functions": { "label": "禁用函式列表", "hint": "逗號分隔；過嚴可能弄壞套件" }, "date_timezone": { "label": "時區" }, "default_charset": { "label": "預設字元集" }, "short_open_tag": { "label": "允許短開標籤（