{ "product": "YSK Server", "tagline": "以 AI 为核心、安全优先的 Linux 服务器管理平台", "company": "YSK Limited", "agents": { "title": "AI Agent 运行时", "body": "OpenClaw / Hermes / IonClaw 安装与监督；所有 tool call 经 Allowlist 与审批。", "status": { "running": "运行中", "activating": "启动中", "stuck": "启动卡住", "connected": "在线", "registered": "仅登记", "stale": "超时", "disconnected": "离线", "not_installed": "未安装", "failed": "失败", "error": "失败", "unknown": "未探测", "fallback": "未知" }, "cmdStatus": { "queued": "已排队", "acked": "已确认", "done": "已完成", "error": "错误" }, "activatingStuckHint": "启动超过 5 分钟，已当失败。请查日志。", "noOnlineAgents": "无上线代理", "journal": "日志", "writeUnit": "写入服务单元", "writeUnitConfirm": "把 {{kind}} 的 systemd 服务单元写入 /etc/systemd。服务不会启动或启用。", "liveN": "{{count}} 在线", "registeredOnly": "仅登记", "awaitProbe": "待探测", "runtimes": "运行时", "running": "运行中", "liveAgents": "在线 agent", "fleet": "机群", "aiTasks": "AI 任务", "expBanner": "实验。", "expBody": "登记 ≠ 在线。真实运维用 CLI：", "expDocs": "文档：repo", "expEdge": "在边缘：", "expPayload": "; 指令 payload 建议", "fleetCan": "机群能做什么", "fleetCanDesc": "不是空壳列表 — 以下是控制面对边缘节点的真实能力", "capRegister": "登记", "capRegisterD": "写入控制面清单（状态「仅登记」）— 不代表进程已跑", "capCommand": "下指令", "capCommandD": "CLI preset（readiness / host / projects…）或自定义；边缘 pull 后跑 ysk-server 并 ack", "capHistory": "指令记录", "capHistoryD": "queued / done / error、exit code、pretty JSON result", "capDelete": "删除", "capDeleteD": "移除 session 与相关消息", "capStatus": "状态", "capStatusD": "仅登记 → 在线（heartbeat）→ 超时（>60s 无心跳）", "statusFlowTitle": "状态流程", "statusFlow": "仅注册→在线→陈旧（>60s）→离线（断开连接）。过滤器“离线”已断开。", "colSession": "会话UUID", "copySession": "复制集群/CLI --session 的会话 UUID", "staleFor": "看不见的{{年龄}}", "commandTitle": "为此会话排队命令", "historyTitleShort": "打开命令历史记录（只读）", "fleetTitle": "机群（{{count}}）", "fleetDesc": "控制面登记清单 · 登记 ≠ 节点已在线", "registerPlus": "+ 登记 Agent", "colId": "标识", "colStatus": "状态", "colGroup": "分组", "colLastSeen": "最后上线", "command": "下指令", "history": "记录", "emptyAgents": "尚未登记 agent", "emptyAgentsDesc": "用列表右上角登记，或等边缘进程自行 register", "historyTitle": "指令记录 · {{id}}", "historyDesc": "queued 等节点 pull；done/error 为 ack。CLI 结果含 exit code + JSON（约 4s 自动刷新）", "refreshHistory": "刷新记录", "colTime": "时间", "finishedAt": "完成 {{at}}", "colCommand": "指令", "colResult": "结果摘要", "colExit": "退出码", "hasResult": "有结果", "emptyCmds": "尚未有指令", "emptyCmdsDesc": "按「下指令」排队；边缘 agent 未在线时会一直 queued", "edgeOnlineTitle": "边缘 agent 如何真正上线", "edgeOnlineDesc": "面板登记后，节点要跑 outbound loop 才会 heartbeat / pull 指令", "controlPlaneApi": "控制面 API：", "controlPlaneHint": "（需网络可达；生产请改成实际面板地址）", "queueNote": "未有边缘进程时，「下指令」仍然有效：会入队列（queued），等 agent 上线再消化。", "runtimeTitle": "AI 运行时", "runtimeDesc": "探测路径与 unit；安装会尝试 enable systemd（需系统变更与 root）", "emptyRuntime": "尚未有探测结果", "emptyRuntimeDesc": "按刷新加载运行时清单，或逐个探测", "pathExists": "已存在", "pathMissing": "尚未安装", "unitUnknown": "{{unit}} · 未知", "unitFallback": "服务单元", "path": "路径", "probe": "探测", "install": "安装", "recentOps": "最近操作", "registerTitle": "登记 Agent", "registerDesc": "只写入控制面清单；不等于节点已在线", "register": "登记", "agentId": "Agent 标识", "agentIdHint": "唯一 ID，例如 edge-1 或 office-gateway", "group": "分组", "groupHint": "用于分区／列表筛选", "registerNote": "状态会显示「仅登记」。节点跑 outbound agent 并 heartbeat 后才变「在线」。", "cmdTitle": "下指令 · {{id}}", "cmdTitlePlain": "下指令", "cmdDesc": "写入队列；边缘 agent pull 后执行并 ack（未在线会一直 queued）", "enqueue": "排队", "cmdPreset": "指令（CLI 优先）", "cmdTypeAria": "指令类型", "customCli": "自定义 CLI", "cliArgs": "CLI 参数", "cliArgsHint": "不用写 ysk-server；例：logs journal --unit nginx.service", "cmdNote": "Edge ysk-server agent run 收到 CLI JSON 会在本机执行 CLI（自动加 --json）。改系统仍要边缘设 YSK_EXECUTE=1。完成后在「记录」看 exit code 与 JSON。", "resultTitle": "指令结果 · exit {{code}}", "resultTitlePlain": "指令结果", "codeComment": "# 概念：register → heartbeat 循环 → 拉指令 → ack\n# 库：ysk-server-core runOutboundAgent / agentCycle", "resultOuter": "外层：edge ack（exitCode / stderr）。内层 result：", "deleteTitle": "删除 {{id}}？", "deleteTitlePlain": "删除 agent？", "deleteDesc": "相关指令记录一并移除。", "fact": { "kind": "类型", "name": "名称", "status": "状态", "unitActive": "服务", "unitName": "单元", "pathExists": "路径存在", "installPath": "安装路径" }, "installBlocked": "无法在管理面板完成安装", "registeredMsg": "已登记 {{id}}（仅控制面；节点需跑 outbound agent 并 heartbeat 才算上线）", "registerFailed": "登记失败", "removedFleet": "已删除机群登记", "enqueuedMsg": "已排队指令 {{id}}…（节点 pull 后才执行）", "enqueueFailed": "下指令失败", "loadCommandsFailed": "加载指令失败", "probedMsg": "已探测 {{kind}}", "probeFailed": "探测失败", "wroteUnitMsg": "已写入 {{kind}} 服务设置", "writeFailed": "写入失败", "installedMsg": "已安装 {{kind}}", "installIncomplete": "安装未完成", "badgeDryRun": "计划模式（dry-run）", "badgeBlocked": "已阻挡", "labelStderr": "标准错误", "labelAckCli": "确认 + CLI JSON", "labelStdoutBody": "CLI 标准输出内容", "resultOuterHint": "外层 result 为 CLI --json 标准输出。", "noteAllowlist": "代理工具呼叫必须通过允许清单。", "noteRbacCap": "代理角色权限上限为低写入。" }, "ai": { "status": { "completed": "已完成", "done": "已完成", "executed": "已执行", "failed": "失败", "error": "错误", "rejected": "已拒绝", "pending": "待处理", "planned": "待审批", "approved": "已批准", "running": "执行中", "cancelled": "已取消" }, "activeCount": "{{count}} 进行中", "taskCount": "{{count}} 任务", "tasks": "任务", "active": "进行中", "tasksTab": "任务 ({{count}})", "playbooksTab": "剧本 ({{count}})", "queueTitle": "任务队列", "queueSub": "点选查看计划与步骤 · 终态不显示多余操作", "createTaskPlus": "+ 创建任务", "emptyTasks": "尚未有任务", "emptyTasksDesc": "用列表右上角创建任务，或从剧本库一键产生", "browsePlaybooks": "浏览剧本", "noPrompt": "（无提示）", "stepsOf": "步骤 {{done}}/{{total}}", "noPlanSummary": "（无计划摘要）", "pipelineAria": "任务阶段", "phase": { "plan": "计划", "approve": "审批", "run": "执行", "done": "完成" }, "approveRun": "批准并执行", "cancelTask": "取消任务", "terminalHint": "任务已终结，可创建新任务或执行剧本", "stepsTitle": "步骤（{{count}}）", "noSteps": "尚未产生步骤", "needsApproval": "需审批", "noApproval": "免审批", "reject": "拒绝", "selectTask": "选择任务", "selectTaskDesc": "左侧点一笔任务查看计划与步骤", "playbooksTitle": "剧本库", "playbooksSub": "预设操作组合 · 执行后会创建任务并切到任务分页", "countItems": "{{count}} 个", "searchPh": "名称 / 说明", "noPlaybooks": "无符合剧本", "noPlaybooksDesc": "改关键字或清空搜索", "run": "执行", "createTitle": "创建 AI 任务", "createDesc": "产生计划 ≠ 已执行。工具只会在 allowlist 内。", "generatePlan": "产生计划", "promptLabel": "自然语言指令", "promptHint": "例如：检查主机负载并回报；或 nginx 状态", "promptPh": "描述想做的事…", "createHint": "下一步：在任务详情按「批准并执行」，或拒绝个别步骤。" }, "apache": { "pageDesc": "Apache 站点（PHP 项目 + 独立站）", "pillSites": "{{count}} 站点", "pillSitesSplit": "{{n}} 站点 · 残留 {{leftover}}", "listTitle": "站点（{{count}}）", "emptyTitle": "暂无站点", "createSite": "+ 创建站点", "createTitle": "创建站点", "editTitle": "编辑站点", "deleteTitle": "删除站点？", "deleteDesc": "删除此 Apache 站点？", "stopSites": "将有 {{n}} 个站点停止回应 HTTP。", "colServerName": "域名", "colSource": "来源", "colKind": "类型", "colTarget": "目标", "colStatus": "状态", "filterSource": "来源筛选", "sourceAll": "全部", "sourceProject": "项目", "sourceStandalone": "独立", "sourceArtifact": "磁盘", "sourceOrphan": "残留", "orphanSite": "来源专案已不存在", "openProject": "打开项目", "kindLabel": "类型", "kindProxy": "反代", "kindStatic": "静态", "kindPhp": "PHP", "upstreamLabel": "上游", "rootLabel": "根目录", "sslLabel": "SSL", "sslTerminatedUpstream": "TLS 在 Nginx 前面结束", "apply": "应用", "notInstalled": "未安装 Apache", "globalSettings": "全局设置", "siteSettings": "站点设置", "saveApply": "保存并应用", "settingsSaved": "已保存", "setGzip": "压缩包", "setShowVersion": "显示版本", "setHttp2": "HTTP/2", "setBody": "Body 上限", "setKeepalive": "保活", "setAccessLog": "访问日志", "logOn": "开", "logOff": "关", "setForceHttps": "强制 HTTPS", "setHsts": "HSTS", "setIndexes": "目录列表", "bodyInherit": "跟随全局", "conflict": "域名冲突", "conflictHint": "同一域名有多个来源。请保留项目／独立站行，并移除磁盘残留。", "removeArtifact": "移除残留", "removeArtifactTitle": "移除残留 conf？", "removeArtifactDesc": "删除此未认领的 Apache conf（面板 dataDir），并在可能时停用系统副本。不会删除项目。", "removeArtifactHint": "只删除此残留磁盘 conf，不会删除项目。", "previewConf": "预览 conf", "cleanupConflicts": "清理冲突残留", "cleanupConflictsTitle": "清理全部冲突残留？", "cleanupConflictsDesc": "移除所有与项目或独立站 ServerName 冲突的磁盘 conf。项目行会保留。", "artifactRemovedOk": "已移除残留 conf" }, "applyStatus": { "draft": "草稿", "written": "已写入管理文件", "planned": "处理中", "applied": "已套用到系统", "failed": "失败", "pendingExecute": "待系统权限", "uploaded": "已上传", "issued": "已签发", "missing": "文件缺失" }, "audit": { "recent": "最近审计", "lastN": "最近 {{n}} 条", "actions": { "protection.change": "防护设置变更", "auth.locale": "界面语言变更", "auth.login": "登录", "auth.logout": "登出", "system.firewall.allow_port": "防火墙允许端口", "system.firewall.deny": "防火墙拒绝 IP", "system.firewall.apply": "防火墙应用", "project.deploy": "项目部署", "project.create": "创建项目", "project.delete": "删除项目", "ssl.request": "申请 SSL", "ssl.upload": "上传 SSL", "system.firewall.enable": "防火墙启用／停用", "system.firewall.delete_rule": "删除防火墙规则", "system.firewall.delete_deny": "移除永久拒 IP", "db.adminer.apply": "数据库管理项目", "project.goLive": "项目上线", "project.publish": "发布 Nginx", "project.suspend": "暂停项目", "software.install": "安装软件", "software.update": "更新软件", "backup.restore": "还原备份", "backup.run": "执行备份", "backup.delete": "删除备份" } }, "backups": { "settingsSaved": "已保存备份设置", "saveFailed": "保存失败", "downloadStarted": "已开始下载 {{name}}", "nothingToDo": "无事可做", "tarOkSideFail": "tar OK／副步骤有问题", "success": "成功", "hasFailures": "有失败", "notYet": "尚未", "enabled": "已启用", "needPassword": "缺 password", "off": "关闭", "lastRun": "上次 {{label}}", "backupFiles": "备份档", "projects": "项目", "lastAll": "上次全部", "latestFile": "最新备份档", "remote": "远程", "withBackups": "有备份项目", "ops": "操作", "remoteExclude": "远程 / 排除", "about": "说明", "noBackups": "尚无备份", "noBackupsDesc": "执行「备份所有项目」或于项目详情 Backup", "goOps": "去操作", "projectShort": "项目", "download": "下载", "preview": "预览", "restoreWeb": "还原 web", "restoreFull": "完整还原", "restoreFullTitle": "覆盖此存档中的项目文件和数据库 - 输入文件名进行确认", "restoreWebTitle": "仅从此存档恢复网站文件", "previewTitle": "无需写入即可预览恢复", "partialSkipped": "部分 — 跳过一些项目", "delete": "删除", "opsTitle": "操作", "opsHint": "0 个项目或全部跳过 = 成功；真正有试过备而失败先算失败", "noProjects": "（沒有项目）", "successRatio": " · {{ok}}/{{total}} 成功", "summary": "摘要{{extra}}", "backupFailed": "备份失败", "backupDone": "备份完成", "backupAll": "备份所有项目", "controlPlane": "备份控制平面", "controlPlaneDone": "控制平面备份完成", "cronCmd": "指令：ysk-server backup all --data-dir …", "cronHint": "schedule 带 install=true 且 YSK_EXECUTE=1 时写入 host crontab；否则只写 managed 文件", "dailyCronRegistered": "已登记每日 03:00 计划", "registerDailyCron": "登记每日计划（含安装）", "resticNeedConfig": "请先在「远程／排除」启用 restic 并设置 password", "resticFailed": "restic 失败", "resticDone": "restic 增量完成", "resticOnly": "只跑 restic 增量", "listSnapshots": "列出 restic snapshots", "lastAllDetail": "上次全部备份明細", "time": "时间", "result": "结果", "nothingZero": "无事可做（0 项目）", "notes": "备注", "status": "状态", "skipped": "跳过", "failed": "失败", "lastNoProjects": "上次沒有项目需要备份。", "noPerProject": "沒有 per-project results。", "remoteSide": "远程／restic 副步骤", "step": "步骤", "remoteStep": "远程", "restoreProjectId": "还原用 projectId（可空=全部 list）", "needProjectOrTag": "请填 projectId 或 snapshot 需有 project: tag", "dryRunDone": "dry-run 完成（未写档）", "allSuccess": "全部成功", "failOrSkip": "有失败／跳过", "noteN": "备注 {{n}}", "enableRemote": "启用远程推送", "targetKind": "目标类型", "remoteKindAria": "远程目标类型", "localPath": "本机路径", "host": "主机", "port": "端口", "username": "用户名", "password": "密码", "passwordSshHint": "可留空，改用主机 SSH key", "savedLeaveEmpty": "已保存則留空", "s3Bucket": "Bucket 路径", "region": "区域", "endpointOptional": "Endpoint（可选）", "localMirror": "本机鏡像路径", "remotePath": "远程路径", "remotePathHint": "相对于远程用户的主目录（或 SFTP chroot）。 “。”就是那个家。", "resticTitle": "Restic 增量", "resticDesc": "可选；需 PATH 有 restic。启用后必须设置 password（不会用默认密码）", "enableRestic": "启用 restic", "repoPath": "Repo 路径", "repoPassword": "Repo 密码", "repoPassSaved": "已保存；留空＝不改。启用后必填。", "repoPassRequired": "启用 restic 时必填（不会用默认密码）", "savedPlaceholder": "已保存（留空不改）", "required": "必填", "s3RepoUrl": "或 S3 repo URL", "excludeTitle": "排除規則", "excludeSub": "tar 排除路径，每行一个 glob", "excludeList": "排除清单", "saveAll": "保存全部设置", "restoreFailed": "还原失败", "previewDone": "预览完成", "restoreDone": "还原完成", "previewQ": "预览备份内容？", "restoreWebQ": "选擇性还原 (web)？", "restoreFullQ": "完整还原？", "previewDesc": "只列出 {{name}} 内容，不会改档。", "restoreWebDesc": "将 {{name}} 解壓到项目 home（較保守）。", "restoreFullDesc": "完整 tar 还原 {{name}}，可能覆蓋现有文件。", "restore": "还原", "cancel": "取消", "deleteFailed": "删除失败", "deleted": "已删除", "deleteTitle": "删除备份档？", "deleteDesc": "永久删除 {{name}}", "tabTrash": "回收区", "trashTitle": "回收区（{{count}}）", "trashSub": "删除的备份会在此保留 7 日，之后永久移除。", "trashEmpty": "回收区是空的", "trashEmptyDesc": "删除的备份档会在此保留 7 日。", "trashRestore": "还原", "trashPurge": "永久删除", "trashEmptyAll": "清空回收区", "trashExpires": "到期 {{at}}", "trashPurgeTitle": "永久删除此备份？", "trashPurgeDesc": "永久删除 {{name}}。无法复原。", "trashEmptyTitle": "清空回收区？", "trashEmptyDescConfirm": "永久删除 {{count}} 个备份档。请输入件数确认。", "trashRestored": "已从回收区还原", "trashPurged": "已永久删除", "trashedOk": "已移至回收区", "resticSafeTitle": "restic 还原到安全目录？", "resticSafeDesc": "还原 {{snapshot}} 到项目 {{project}} 的 .restic-restore-* 目录", "resticRestoreDone": "restic 还原完成", "overwriteTitle": "危险：覆盖 home", "overwriteDesc": "将覆盖项目 {{project}} 的 home。输入 OVERWRITE 确认。", "confirmString": "确认字符串", "overwriteHome": "覆盖 home", "resticOverwriteDone": "restic 覆盖 home 完成", "opsResult": "操作结果", "filesTitle": "备份文件 ({{count}})", "filesSub": "管理目录 tar · 下载需登录 · 还原有 dry-run／web／完整", "backupAllBtn": "全部备份", "yes": "是", "no": "否", "safeDir": "安全目录", "remotePushTitle": "远端推送目标", "remotePushSub": "本地 tar 成功后可推送到 SFTP、本机路径或 S3", "accessKey": "访问密钥", "secretKey": "密钥", "overwriteConfirmHint": "输入 OVERWRITE 确认覆盖", "testRemote": "测试目的地", "testRemoteHint": "会连线远端主机并写入测试档，并非只读探测。", "testRemoteDone": "远端探测完成", "testRemoteFailed": "远端探测失败", "resticRepoPh": "面板资料目录／restic 库", "testDisabledHint": "请先开启远端推送才可测试。", "identityId": "出站 SSH 身份", "identityHint": "首选。与 /security SSH 相同的保管库。密码需要sshpass。", "identityNone": "无 — 密码或默认密钥", "skippedListHint": "以下专案被略过：", "skippedPendingOs": "已略过 — 待建立系统用户（主目录不存在）", "goLogs": "开启日志", "goAbout": "备份说明", "previewListingTitle": "封存内容", "restoreNamedDesc": "将 {{name}} 还原到专案 {{project}}。", "overwriteNamedDesc": "用快照 {{snapshot}} 覆写专案 {{project}} 的档案。", "resticSafeNamed": "将专案 {{project}} 的快照 {{snapshot}} 还原到安全目录。" }, "btTracker": { "title": "BT追踪器", "sub": "自架 BitTorrent／WebTorrent，供档案分享使用", "pageDesc": "以 BitTorrent 为面板档案分享做种。先启動 Tracker、设定公开 announce 主机，再于「档案」建立 BT 分享。", "status": "状态", "running": "运行中", "stopped": "已停止", "installed": "已安裝（隨产品附帶）", "start": "启動 Tracker", "stop": "停止 Tracker", "stopTitle": "停止跟踪器 - 播种和下载将中断", "stopDesc": "正在运行的种子停止通知。对等点会断开连接，直到您再次启动跟踪器。", "fillPublicHost": "使用{{主机}}", "fillPublicHostTitle": "填写当前面板主机名作为公告主机", "refresh": "重新整理", "settings": "设定", "httpPort": "HTTP／WebSocket 埠", "udpPort": "UDP 埠（0 = 关閉）", "listenHost": "监听位址", "listenHostHint": "0.0.0.0 会听全部位址。若不必对外，请改绑 127.0.0.1。", "listenAllWarn": "Tracker 正绑定全部位址。防火墙关闭时等同对公网开放。可改绑 127.0.0.1，或在防火墙限制该埠。", "bindLoopback": "只绑 127.0.0.1", "bindAll": "0.0.0.0（全部）", "wsEnabled": "WebSocket Tracker", "wsEnabledHint": "浏览器 WebTorrent 客户端需要", "autostart": "隨面板自動启動", "autostartHint": "ysk-server serve 开机时一併启動 Tracker", "publicAnnounceHost": "公开 announce 主机", "publicAnnounceHostHint": "寫入 magnet 的主机名或 host:port。空白則用 127.0.0.1（僅同机）。", "maxSeeds": "同时做种上限", "seederPorts": "做种 peer 埠范围", "seederPortMin": "Peer 埠起始", "seederPortMax": "Peer 埠结束", "seederPortsHint": "程序內做种器的本机 peer 监听范围", "saveSettings": "储存设定", "applyHint": "储存埠不会自動开防火墙。请先用下方网络暴露，再启動。", "torrents": "Torrent", "torrentsEmpty": "尚无追蹤中的 Torrent", "torrentsEmptyHint": "请于「档案」以 BitTorrent 模式建立分享。Peers announce 及本机做种后，此表会自動更新。", "torrentsDesc": "Tracker 即时 swarm，并显示面板分享的本机做种状态。", "colName": "名称", "colHash": "Info hash", "colSeeds": "种子", "colLeechers": "下載者", "colStatus": "状态", "announceUrls": "Announce 网址", "announceDesc": "客户端可填入这些 Tracker，或直接使用面板产生的 magnet。", "copy": "複製", "copied": "已複製", "statsTorrents": "Torrent 数", "statsLibrary": "数据库", "statsLibraryHint": "面板数据库／档案分享的 Torrent 列", "statsTrackerLeftover": "Tracker leftover", "statsTrackerLeftoverHint": "Tracker announce hashes that are not library rows", "leftoverHashesTitle": "Tracker 残留杂凑", "publicHostMissingLive": "Tracker 已在听，但未设定公开 announce 主机。外网对等节点找不到此种子。", "leftoverHashesHint": "只读。这些 announce 不是数据库或分享列。", "statsPeers": "同行", "statsAnnounces": "Announce 次数", "statsAnnouncesHint": "Tracker 行程收到的 announce 次数", "statsJobs": "进行中任務", "openShares": "档案分享", "needExecute": "生产環境请启用系統变更权限（YSK_EXECUTE）以綁定埠。", "guideTitle": "这是什么？", "guideBody": "建立 BT 档案分享时，YSK 会产生 .torrent、自行做种，并透过此 Tracker 交換 peers。下載者在主机外时请开放对应埠。", "restoreSeeds": "重新做种", "restoreSeedsHint": "必要时启動 Tracker，并为仍有磁碟上 .torrent 的分享重新做种。", "bundledNote": "隨 YSK Server 附帶（Node）。无需 apt 安裝 — 以启動／停止管理进程。", "stackTitle": "软件", "jobs": "任務", "jobsEmpty": "沒有背景 torrent 任務", "jobsEmptyHint": "大型分享（≥128 MiB）会在背景建立 .torrent，讓档案分享对话框保持流畅。", "jobsDesc": "大型档案或资料夹分享的背景 create-torrent 队列。", "colJob": "任務", "colShare": "分享", "colJobStatus": "状态", "colEnqueued": "排入时間", "refreshJobs": "重新整理任務", "tabOverview": "概览", "tabTorrents": "Torrent", "tabJobs": "任務", "tabSettings": "设定", "tabAbout": "关于", "heroRunning": "Tracker 运行中", "heroStopped": "Tracker 已停止", "heroRunningSub": "Peers 可 announce 并發現面板分享的种子。", "heroStoppedSub": "要以 BitTorrent 分享大档前，请先启動 Tracker。", "live": "即时", "liveOff": "閒置", "quickStart": "快速开始", "quickStartDesc": "三步完成 BitTorrent 档案分享。", "step1Title": "设定公开 announce 主机", "step1Hint": "客户端 magnet 使用的主机名（设定）。", "step2Title": "启動 Tracker", "step2Hint": "Peers 在主机外时请开放埠暴露。", "step3Title": "建立 BT 分享", "step3Hint": "档案 → 分享，选择 BitTorrent 或兩者。", "stepDone": "已完成", "stepTodo": "待办", "networkCard": "网络", "networkCardDesc": "Tracker 监听位置，以及 magnet 显示的主机。", "seederCard": "做种器", "seederCardDesc": "程序內 WebTorrent 做种上限与 peer 埠。", "lifecycleCard": "生命周期", "lifecycleCardDesc": "开机行为与服務打包方式。", "pid": "PID", "port": "埠", "announceHost": "Announce 主机", "goSettings": "前往设定", "searchTorrents": "搜寻名称或 hash…", "filterAll": "全部", "filterSeeding": "做种中", "filterOther": "其他", "noMatch": "沒有符合条件的 Torrent", "seedStatusSeeding": "做种中", "seedStatusPending": "处理中", "seedStatusError": "错误", "seedStatusStopped": "已停止", "seedStatusNone": "无", "notesTitle": "服務备註", "exposureTitle": "网络存取", "protoHttp": "HTTP", "protoWs": "WS", "protoUdp": "UDP协议", "saveOk": "设定已储存", "saveOkRestart": "已保存 — 重新启动跟踪器以应用端口", "startedOk": "Tracker 已启動", "stoppedOk": "Tracker 已停止", "restoredOk": "重新做种完成", "restoredCount": "已重新做种 {{seeded}}／{{attempted}} 个 Torrent", "portInvalid": "请输入 1 至 65535 的埠号。", "extraTrackerRequired": "请填写公布网址。", "stopPort": "Tracker 埠 {{port}} 将停止监听。", "stopPid": "行程 PID {{pid}} 将结束。", "swarmLeftoverUnlisted": "另有 {{count}} 个残留 announce 未列杂凑。", "httpPortHint": "默认 8000（YSK 防火墙芯片）。Peers 在主机外时请开 TCP。", "udpPortHint": "可选传统 UDP announce。0 = 关闭（浏览器 WebTorrent 用 HTTP／WS 即可）。若要开 UDP，建议 6969，或与 HTTP 同一端口并在防火墙放行。", "udpPortOff": "0 · 关闭", "udpPortSameHttp": "与 HTTP 相同（{{port}}）", "udpPortClassic": "6969 · 传统", "portSuggest8000": "8000 · 建议", "announceHostUnset": "未设置", "tabTrackers": "Tracker", "addTorrent": "加入 Torrent", "addTorrentTitle": "加入 Torrent", "addTorrentHint": "上传 .torrent 或粘贴 magnet，再选保存文件夹。文件不齐会用 WebTorrent 下载，齐了就做种。", "dropTorrent": "將 .torrent 拖放到此處", "chooseFile": "或選擇檔案", "magnetLabel": "磁铁", "magnetPlaceholder": "磁铁:?xt=瓮:btih:…", "inspect": "读取", "extraTrackersPreview": "將額外向 {{n}} 個常用 Tracker announce", "saveLocation": "保存位置", "saveRootPublic": "公开文件", "newFolder": "新文件夹", "destPreview": "将写入", "startDownload": "开始下载", "filterDownloading": "下载中", "filterPaused": "已暂停", "filterError": "错误", "emptyDrop": "將 .torrent 拖放到此處，或選擇檔案", "emptyHint": "下载会写入你指定的文件夹；文件已齐就直接做种。引擎是 WebTorrent，不会另外安装下载软件。", "pause": "暂停", "resume": "继续", "openFolder": "打开文件夹", "remove": "移除", "removeKeep": "移除并保留文件", "removeDelete": "移除并删除文件", "removeConfirm": "要从资料库移除此 Torrent？", "kindShare": "分享", "filesInTorrent": "個檔案", "extraTrackersDesc": "这里是额外 announce。资料库下载／做种和文件 BT 分享都会一并通知这些 Tracker。不会取代 .torrent 原有清单，也不会让本机 Tracker 对外开放。", "extraTrackersEmpty": "还没有常用 Tracker。加入 http(s)／udp／ws(s) announce URL 才可靠外站找 peers。", "extraTrackerAdd": "加入", "extraTrackerUrl": "公布网址", "extraTrackerApply": "套用到现有做种", "extraTrackerApplyOk": "已套用常用 Tracker", "extraEnabled": "启用", "extraTrackerBad": "URL 必须以 http://、https://、udp://、ws:// 或 wss:// 开头", "extraTrackerDup": "清单已有此 URL", "extraTrackerLimit": "最多 32 个常用 Tracker", "addOk": "已加入资料库", "savedTo": "保存", "folderEmpty": "没有子文件夹", "needTorrentFile": "请选择 .torrent 文件", "torrentTooBig": ".torrent 大於 8 MiB", "seedStatusDownloading": "下載中", "seedStatusChecking": "檢查中", "seedStatusPaused": "已暫停", "seedStatusQueued": "排隊中", "swarmLeftover": "Tracker 记录另有 {{count}} 个 announce（不是数据库 Torrent 列；来源不同）", "addSourceSection": "来源", "addSourceFile": "文件", "addSourceMagnet": "磁铁", "previewSection": "预览", "saveRoot": "根目录", "clearFile": "清除文件", "extraTrackersTitle": "额外 announce", "extraTrackersEmptyTitle": "尚未加入 Tracker", "extraEnabledCount": "{{count}} 条已启用", "extraApplyHint": "至少启用一条才可套用到现有做种", "destMode": "此文件夹的用法", "seedExisting": "使用现有文件做种", "downloadNewFolder": "下载到新文件夹", "destFileConflict": "此处已有文件 {{name}}。请另选文件夹；若文件就是此 Torrent 的内容，请选「使用现有文件做种」。", "waitingPeers": "正在等待 peers。若文件已在此主机，请重新加入并选「使用现有文件做种」。" }, "catalog": { "sw": { "vsftpd": "vsftpd（FTPS）", "db_util": "db-util（FTP 用户数据库）", "nginx": "Nginx", "certbot": "Certbot (Let's Encrypt)", "mysql_client": "MySQL／MariaDB 客户端", "mysql_server": "MySQL 服务器", "mariadb_server": "MariaDB 服务器", "postgresql_client": "PostgreSQL 客户端", "postgresql": "PostgreSQL 服务器", "redis_tools": "Redis 客户端", "redis_server": "Redis 服务器", "ufw": "UFW 防火墙", "fail2ban": "fail2ban", "postfix": "Postfix", "dovecot": "Dovecot", "opendkim": "OpenDKIM", "pdns_server": "PowerDNS", "git": "git", "node": "Node.js", "php": "PHP", "python": "Python", "go": "Go", "rust": "Rust", "chromium": "Chromium / Chrome" }, "php": { "session": "会话", "opcache": "OPcache" } }, "cdn": { "fromProjectOk": "已从项目创建 CDN 站点 — 请套用 edges / DNS", "fromProjectUpdated": "已更新项目绑定的 CDN 站点", "fromProjectFailed": "from-project 失败", "nodeUpdated": "节点已更新", "nodeCreated": "节点已建立", "saveFailed": "儲存失败", "geoMapInvalid": "geoMap JSON 无效，例：{\"hkg\":[\"node-id\"]}", "siteUpdated": "站点已更新", "siteCreated": "站点已建立", "probeOnline": "探活成功（online）", "probeOffline": "探活失败（offline）", "probeFailed": "探活失败", "batchProbeOk": "全部节点探活完成", "batchProbePartial": "部分／全部节点不健康", "batchProbeFailed": "批次探活失败", "drainingSet": "已设为 draining", "drainCleared": "已解除 drain", "confirmDeleteNode": "确定删除此 CDN 节点？", "nodeDeleted": "已删除节点", "deleteFailed": "刪除失败", "confirmDeleteSite": "确定删除此 CDN 站点？", "siteDeleted": "已删除站点", "blocked": "已封锁（需系统变更权限）", "previewRender": "预览渲染（{{status}}）hash={{hash}}", "fanoutDone": "Fan-out 完成（{{status}}）", "purgeDone": "Purge 完成（{{status}}）", "dnsSyncDone": "DNS 同步完成（{{status}}）", "sslDone": "SSL 操作完成（{{status}}）", "confWritten": "已写入 conf（{{status}}）", "partialFail": "未全部成功（{{status}}）— 见 notes", "statNodes": "节点", "hitNoStats": "尚无边缘统计", "loopbackOriginBlocked": "不会把回环 origin {{url}} 写到远端边缘。请先改成可达的 origin。", "applyFailedHint": "套用失败 — 见下方说明", "applyFailedNoNote": "没有存下失败原因。请再套用一次以记录错误。", "applyStatus": { "draft": "草稿", "planned": "已计划", "applying": "套用中", "applied": "已套用", "failed": "失败", "partial": "部分" }, "statSites": "站点", "statSitesCount": "站点 {{n}}", "cacheMethod": { "none": "无法估计", "access_log": "存取日志", "cache_dir": "快取目录", "log_format": "需设定日志格式" }, "geoMapLabel": "地区对照（JSON）", "statApplyFailed": "套用失败", "pillNodesSites": "{{n}} 个节点 · {{s}} 个站点", "statOnline": "线上", "statHit": "命中率", "hitUnknown": "未知", "lastHealthHint": "最后一次探测 {{at}} · {{ok}}", "lastHealthNever": "尚未探测 — 运行 Probe", "lastHealthFail": "探测失败", "healthLoopNeedSites": "先添加站点", "nodeStatus": { "online": "在线的", "offline": "离线", "draining": "排水", "unknown": "未知" }, "recentNotes": "最近 notes", "previewOnlyNote": "本次仅预览，未写入边缘。", "statByRegion": "区域：", "statByApply": "套用状态：", "col": { "origin": "来源站", "edges": "边缘数", "apply": "套用状态", "dns": "DNS", "edgesOnline": "边缘 线上／已套用", "dnsRr": "CDN DNS 记录" }, "mode": { "origin_pull": "回源拉取", "reverse_proxy": "反向代理", "static_edge": "静态边缘" }, "dnsStrategy": { "multi_a": "多 A 记录", "cname": "CNAME", "geo": "地区" }, "edgesOnlineApplied": "线上 {{online}}/{{total}} · 已套用 {{applied}}", "hitMiss": "命中 {{hits}}／未命中 {{misses}}", "cacheBytes": "快取约 {{n}} B", "hitRateUnknown": "找不到含快取状态的存取日志，也没有快取目录，因此无法估算命中率。", "edgeConfPreview": "Nginx edge conf 预览", "tabs": { "nodes": "节点", "sites": "站点", "dashboard": "仪表", "about": "说明" }, "nodesTitle": "CDN 节点（{{count}}）", "nodesDesc": "登记 control / origin / edge / dns。探活更新 status。", "offlineHint": "离线／探活失败。若是测试残留，可删除此节点。", "colName": "名称", "colRole": "角色", "colStatus": "状态", "clearDrain": "解除 drain", "drain": "流走", "drainTitle": "停止向此边缘发送新的 CDN 流量", "drainDesc": "排空“{{name}}”？现有连接将保留直至完成。", "drainLastTitle": "这是最后一个边缘——排水将使每个站点都没有边缘", "drainLastDesc": "“{{name}}”是唯一的边缘。将其排干后，所有站点都没有边缘。", "clearDrainTitle": "再次在此边缘接受新流量", "clearDrainDesc": "清理“{{name}}”上的排水管吗？", "deleteNodeTitle": "删除此 CDN 边缘", "deleteLastNodeTitle": "删除最后一条边——所有站点都将没有边", "purge": "清除", "previewTitle": "预览 nginx 配置（不写）", "writeConfTitle": "编写边缘 nginx 配置文件", "applyEdgesTitle": "将此站点应用到边缘（写入 nginx）", "purgeTitle": "清除边缘缓存", "dnsSyncTitle": "写入CDN DNS记录", "probeDnsTitle": "探测边缘和 DNS（只读）", "distSslTitle": "将 TLS 材质复制到边缘", "leIssueTitle": "颁发 Let’s Encrypt 证书并分发", "deleteSiteTitle": "删除此 CDN 站点", "siteOpConfirmGeneric": "对“{{name}}”运行此操作吗？", "siteOpConfirmDesc": "站点“{{name}}”·{{action}}。这可以更改 nginx、DNS 或证书。", "siteOpConfirm": { "apply": "将这个网站应用到边缘？", "render": "为这个站点编写 nginx 配置吗？", "purge": "清除该网站的缓存吗？", "dns-sync": "同步此站点的 DNS 吗？", "dist": "将 TLS 分发到边缘？", "issue": "问题让我们加密并分发？" }, "emptyNodesTitle": "尚未登記 CDN 节点", "emptyNodesDesc": "请使用右上角「+ 新增节点」登记 edge，再创建站点。", "sitesTitle": "CDN 站点（{{count}}）", "sitesDesc": "域名 + origin + edges + cache + multi-A DNS。套用 edges / DNS 同步 / purge。", "healthLoopOk": "全部站点健康循环完成", "healthLoopPartial": "健康循环部分失败", "healthLoopFailed": "health-loop 失败", "colDomain": "域名", "colMode": "模式", "emptySitesTitle": "尚未有 CDN 站点", "emptySitesDesc": "请用表格右上角「+ 新增站点」创建站点。", "emptySitesNoEdge": "尚无 edge：先到「节点」分页，用表格右上角「+ 新增节点」登记，再回来创建站点。", "dashboardTitle": "CDN 仪表", "updatedAt": "更新于 {{at}}", "dashboardEmpty": "尚未加载仪表", "siteStatus": "站點状态", "cacheHitEstimate": "缓存命中率粗估", "dashboardNotes": "仪表 notes", "editNode": "編輯 CDN 节点", "addNode": "新增 CDN 节点", "nodeAddrHint": "至少填 IPv4 / IPv6 / healthUrl / baseUrl 其中一项", "sshHostHint": "可空＝用 IPv4；127.0.0.1＝本机 local apply", "sshHostPlaceholder": "留空用 public IPv4", "sshUser": "SSH 用户", "fleetHint": "仅填 fleet、无 SSH 时：fan-out 会入队列给 agent（ysk-server agent loop），queued ≠ 已 r", "fleetPlaceholder": "Agents 页面 session UUID", "editSite": "編輯 CDN 站点", "addSite": "新增 CDN 站点", "originHint": "origin 先支持 URL；project 绑定后续强化", "commaSeparated": "逗号分隔", "originUrl": "edge 回源地址", "edgeNodes": "Edge 节点", "cache": "缓存", "dnsPolicy": "DNS 策略", "dnsPolicyHint": "multi_a=多 IP；failover=只写最健康一颗", "zoneOptional": "可空＝依域名自动匹配 zone", "sslMode": "SSL 模式", "sslModeHint": "upload＝SSL 页已有证书；le_http01＝edge ACME", "leEmailOptional": "LE email（可选）", "leEmailHint": "签发时预填", "shieldHint": "非 shield edge 经此节点回源", "geoMapHint": "strategy=geo 时用，例 {\"hkg\":[\"id1\"],\"nrt\":[\"id2\"]}", "geoSubdomain": "geo 子域名", "addNodeBtn": "+ 新增节点", "addSiteBtn": "+ 新增站点", "probeAll": "全部探活", "healthLoop": "健康循环", "setDraining": "设 draining", "fromProjectUpdatedAlt": "已更新项目绑定的 CDN 站点", "refresh": "刷新", "closePreview": "关闭预览", "probe": "探活", "preview": "预览", "writeConf": "写入 conf", "applyEdges": "套用 edges", "dnsSync": "DNS 同步", "probeDns": "探活+DNS", "distSsl": "分发 SSL", "leIssue": "LE 签发", "reaggregate": "重新汇总", "createEdgeFirst": "请先创建 edge 节点", "enableProxyCache": "启用 proxy_cache", "autoMatch": "（自动匹配）", "none": "（无）", "writeRegionDns": "写入 region 子域名 A/AAAA（如 hkg）", "workflowHint": "流程：写入 conf → 套用 edges → 探活+DNS → SSL。项目一键：/cdn?fromProject=项目ID", "healthLoopAll": "全站健康循环", "deleteNodeDesc": "将删除 CDN 节点「{{name}}」。", "deleteSiteDesc": "将删除 CDN 站点「{{name}}」。", "deleteSiteC1": "站点策略与边缘关联", "deleteSiteC2": "已下发的 nginx 配置需另行清理或重新应用", "statOnlineOf": "线上 {{n}}/{{total}}", "colRegion": "区域", "statDraining": "排空中 {{n}}", "statOffline": "离线 {{n}}", "localTest": "本机／测试", "statHitRate": "命中率 {{v}}" }, "cli": { "unknownCommand": "未知命令：{{command}}\n执行 `{{cli}} help`", "usagePrefix": "用法：", "security": { "help": "用法：ysk-server security status\n ysk-server security sessions list|revoke|revoke-others [--user U]\n ysk-server security api-keys list|create|delete …", "sessionsHelp": "用法：ysk-server security sessions list [--user U]\n ysk-server security sessions revoke --id PREFIX [--user U]\n ysk-server security sessions revoke-others [--user U] [--keep-token T]", "apiKeysHelp": "用法：ysk-server security api-keys list\n ysk-server security api-keys create --name N [--user U] [--scope full|read]\n ysk-server security api-keys delete --id KEY_ID", "noUser": "找不到用户。请先创建管理员，或传入 --user <名称|id>", "tokenOnce": "token 只显示一次 — 请妥善保存", "sessionRevokeUsage": "用法：ysk-server security sessions revoke --id [--user U]", "apiKeyDeleteUsage": "用法：ysk-server security api-keys delete --id KEY_ID" }, "help": { "blurb": "控制平面 CLI — AI agent 请优先用 --json。\n文档：docs/agent/README.md · docs/cli/reference.md · docs/agent/commands.json", "main": "{{product}} ({{cli}}) v{{version}}\n\n控制平面 CLI — AI agent 请优先用 --json。\n文件：docs/agent/README.md · docs/cli/reference.md · docs/agent/commands.json\n\n用法：\n {{cli}} [options]\n\n命令：\n setup 初始化 dataDir + 管理员\n update 自我更新检查／套用\n serve HTTP API + Web UI\n system unit-install 安装 ysk-server.service [--enable]\n tools 工具列表；tools run --tool [--dry-run]\n ask 自然语言 → AI 计划 [--execute]\n projects list|get|create|deploy|stop|health|backup|template\n backup all|list|status|restore|delete|schedule|control-plane|settings|restic\n templates 应用范本\n hosting nginx|dns|db|firewall 辅助\n dns zone|zones|lookup|ddns（AI 别名 → hosting dns-*）\n logs sources|query|journal|overview\n host overview|metrics（唯读）\n nginx status|list|test|sync\n ssl list|get（憑证）\n db-cluster list|get|create|plan（HA 先计划）\n ssh-key list|create|import|public|export|install|delete（SSH 身分库）\n ssh-2fa list|enroll|confirm|install|pam|retire（SSH 登入 TOTP ≠ 面板 2FA）\n services 主机服務矩阵（systemctl 探测）\n defense | protection status|ban|unban|whitelist\n security status|sessions|api-keys（2FA · 撤销工作阶段 · API 金钥）\n cdn nodes|sites|render|apply|purge|probe|dashboard|health-loop|from-project\n agents runtimes|fleet list|commands|register（面板 + 边缘）\n agent run 外送 fleet 轮询（实验）\n store status|export|import|migrate（json|sqlite|postgres document 后端）\n files list|read|write|mkdir|rm|stat|rename|copy|move|chmod|trash|shares（沙箱）\n cron list|create|update|delete|enable|disable|run|install|status|host\n email domains|mailboxes|deliverability|bootstrap|dns（面板对等）\n health 本机模式快照或 --url http://host:port/health\n readiness | doctor 生产就绪（诚实）\n migrate inventory|host|post|status|resume（整机迁移）\n validators list|chains|disk|get|checklist (Beta)\n docker status|ps|images|compose|prune (engine)\n version | help\n\n全域：\n --json JSON 标准输出（AI）\n --data-dir PATH\n --config PATH\n --help | --version\n\n结束码：0 成功 · 1 错误 · 2 验证 · 3 阻挡 · 4 找不到 · 5 主机错误\n\n安全：\n 危险操作预设 dry-run（只出计划）。\n 传 --execute（别名 --apply）+ 环境变数 YSK_EXECUTE=1 才改主机。\n\n例子：\n {{cli}} readiness --json\n {{cli}} host --json\n {{cli}} nginx status --json\n {{cli}} ssl list --json\n {{cli}} projects get --id UUID --json\n {{cli}} defense ban --ip 1.2.3.4 --json # dry-run 计划\n {{cli}} projects list --json\n {{cli}} logs query --source journal: --lines 100 --json\n {{cli}} tools --json" }, "usage": { "tools": { "run": { "--tool": { "name": { "--arg": { "cd327c": "用法： ysk-server tools run --tool [--arg key=val] [--dry-run]\n" } } } } }, "email": { "domains": { "list": { "create": { "get": { "b94a62": "用法： ysk-server email domains list|create|get …\n" } } }, "create": { "--domain": { "example": { "bd4036": "用法： ysk-server email domains create --domain example.com --ip A.B.C.D\n" } } } }, "mailboxes": { "list": { "create": { "42b26c": "用法： ysk-server email mailboxes list|create …\n" } }, "create": { "--domain": { "example": { "7227f3": "用法： ysk-server email mailboxes create --domain example.com --local user [--password P]\n" } } } }, "dns": { "--domain": { "example": { "com": { "26b806": "用法： ysk-server email dns --domain example.com\n" } } } }, "sub": { "--data-dir": { "path": { "--json": { "73dad0": "用法： ysk-server email [--data-dir PATH] [--json]\n domains list|create|get [--q TEXT]\n create --domain example.com --ip A.B.C.D\n get --domain example.com | --id UUID\n mailboxes list|create [--domain D | --id domainId]\n create --domain D --local user [--password P]\n deliverability --domain D | --id UUID\n deliverability-overview\n bootstrap --domain D --ip A.B.C.D [--install]\n dns --domain D | --id UUID # DNS bundle for panel\nAlso: hosting email-apply|email-mailbox|email-deliverability (aliases)\n" } } } }, "deliverability": { "--domain": { "example": { "com": { "b0dff0": "用法： ysk-server email deliverability --domain example.com\n" } } } }, "bootstrap": { "--domain": { "example": { "com": { "affc8d": "用法： ysk-server email bootstrap --domain example.com --ip 1.2.3.4 [--install]\n" } } } } }, "cron": { "delete": { "--id": { "job": { "id": { "f6aafe": "用法： ysk-server cron delete --id JOB_ID\n" } } } }, "sub": { "--id": { "job": { "id": { "99cfdf": "用法： ysk-server cron {{sub}} --id JOB_ID\n" } } }, "--data-dir": { "path": { "--json": { "0349e6": "用法： ysk-server cron [--data-dir PATH] [--json]\n list [--project-id ID] [--q TEXT]\n create --schedule \"0 3 * * *\" --command CMD [--project-id ID] [--user USER]\n update --id JOB_ID [--schedule S] [--command CMD] [--user USER] [--project-id ID] [--enable|--disable]\n delete --id JOB_ID\n enable|disable --id JOB_ID\n run --id JOB_ID # run-now (needs YSK_EXECUTE=1)\n install # load managed crontab (needs EXECUTE)\n status # probe managed file vs host crontab\n host [list] [--user USER] [--jobs-only]\n host edit --user USER --old-schedule S --old-command C --schedule S --command C --execute\n host disable|enable|delete|adopt --user USER --old-schedule S --old-command C --execute\n host run --user USER --command C --execute\n诚实：未设置 YSK_EXECUTE=1 时，install 与 host 写入会封锁。\n" } } } }, "run": { "--id": { "job": { "id": { "a0a97f": "用法： ysk-server cron run --id JOB_ID\n" } } } }, "create": { "--schedule": { "0": { "3": { "9a8328": "用法： ysk-server cron create --schedule \"0 3 * * *\" --command CMD [--project-id ID] [--user USER]\n" } } } } }, "files": { "stat": { "--path": { "rel": { "17c8f2": "用法： ysk-server files stat --path REL\n" } } }, "read": { "--path": { "rel": { "e35f8d": "用法： ysk-server files read --path REL\n" } } }, "mkdir": { "--path": { "rel": { "ae0438": "用法： ysk-server files mkdir --path REL\n" } } }, "rm": { "--path": { "rel": { "--permanent": { "fe2051": "用法： ysk-server files rm --path REL [--permanent]\n" } } } }, "rename": { "--from": { "rel": { "--to": { "35a260": "用法： ysk-server files rename --from REL --to REL\n" } } } }, "copy": { "--from": { "rel": { "--to": { "5337f4": "用法： ysk-server files copy --from REL --to REL\n" } } } }, "move": { "--from": { "rel": { "--to": { "75cf5d": "用法： ysk-server files move --from REL --to REL\n" } } } }, "chmod": { "--path": { "rel": { "--mode": { "39f983": "用法： ysk-server files chmod --path REL --mode 644\n" } } } }, "trash": { "restore": { "--id": { "trash": { "c89ce9": "用法： ysk-server files trash restore --id TRASH_ID\n" } } }, "list": { "restore": { "purge": { "ef063d": "用法： ysk-server files trash list|restore|purge\n" } } } }, "shares": { "list": { "ac342c": "用法： ysk-server files shares list\n" } }, "webdav": { "status": { "token": { "disable": { "f8e94b": "用法： ysk-server files webdav status|token|disable\n" } } } }, "sub": { "--root": { "public": { "project": { "42ebd4": "用法： ysk-server files [--root public|project:ID] [--data-dir PATH] [--json]\n list [--path DIR] [--q TEXT] [--sort name|size|mtime] [--order asc|desc]\n stat --path REL\n read --path REL\n write --path REL --content TEXT | --file LOCAL\n mkdir --path REL\n rm --path REL [--permanent]\n rename --from REL --to REL\n copy --from REL --to REL\n move --from REL --to REL\n chmod --path REL --mode 644\n trash list|restore|purge [--id TRASH_ID]\n shares list\n favorites list\n upload --dir REL --file LOCAL [--file LOCAL2…]\n webdav status|token|disable\nSandbox: only public files root or project home (path-constrained).\n" } } } }, "write": { "--path": { "rel": { "--content": { "0addb1": "用法： ysk-server files write --path REL --content TEXT | --file LOCAL\n" } } } }, "upload": { "--dir": { "rel": { "--file": { "f8c3bf": "用法： ysk-server files upload --dir REL --file LOCAL [--file LOCAL2…]\n" } } } } }, "store": { "import": { "--in": { "file": { "json": { "5b6fdd": "用法： ysk-server store import --in FILE.json\n" } } } }, "sub": { "--data-dir": { "path": { "--json": { "d580e4": "用法： ysk-server store [--data-dir PATH] [--json]\n status Show backend kind + counts\n export --out FILE.json Dump document snapshot\n import --in FILE.json Overwrite snapshot from file\n migrate --to sqlite|json [--out PATH]\n Copy current store into another backend file\nEnv: YSK_STORE=json|sqlite|postgres YSK_DATABASE_URL=postgres://…\nHonesty: document-blob backends (not full relational schema yet).\n" } } } }, "migrate": { "--to": { "json": { "sqlite": { "1c52a3": "用法： ysk-server store migrate --to json|sqlite [--out PATH]\n (postgres: export JSON then import under YSK_DATABASE_URL)\n" } } } } }, "cdn": { "nodes": { "delete": { "--id": { "node": { "0c6a1e": "用法： ysk-server cdn nodes delete --id NODE_ID\n" } } }, "drain": { "--id": { "node": { "a8aa81": "用法： ysk-server cdn nodes drain --id NODE_ID [--off]\n" } } }, "list": { "upsert": { "delete": { "52549e": "用法： ysk-server cdn nodes list|upsert|delete|probe|drain …\n" } } }, "upsert": { "--name": { "name": { "8f6f39": "用法： ysk-server cdn nodes upsert --name NAME [--id ID] [--base-url U] [--fleet-agent-id S] [--ssh-host H] [--region R]\n" } } } }, "sites": { "get": { "--id": { "site": { "3c3c35": "用法： ysk-server cdn sites get --id SITE_ID\n" } } }, "delete": { "--id": { "site": { "51ef8f": "用法： ysk-server cdn sites delete --id SITE_ID\n" } } }, "list": { "get": { "upsert": { "609da6": "用法： ysk-server cdn sites list|get|upsert|delete …\n" } } }, "upsert": { "--name": { "n": { "6ebb75": "用法： ysk-server cdn sites upsert --name N --domains a.com,b.com [--edge-id ID]… [--origin-url U] [--origin-project ID]\n" } } } }, "render": { "--site-id": { "id": { "--dry-run": { "2149eb": "用法： ysk-server cdn render --site-id ID [--dry-run]\n" } } } }, "apply": { "--site-id": { "id": { "--edge-id": { "a527b3": "用法： ysk-server cdn apply --site-id ID [--edge-id EDGE]\n" } } } }, "purge": { "--site-id": { "id": { "--edge-id": { "bc08ec": "用法： ysk-server cdn purge --site-id ID [--edge-id EDGE]\n" } } } }, "dns-sync": { "--site-id": { "id": { "--apply-zone": { "343068": "用法： ysk-server cdn dns-sync --site-id ID [--apply-zone]\n" } } } }, "sub": { "--data-dir": { "path": { "--json": { "092842": "用法： ysk-server cdn [--data-dir PATH] [--json]\n nodes list|upsert|delete|probe|drain\n sites list|upsert|delete|get\n render --site-id ID [--dry-run]\n apply --site-id ID [--edge-id ID] # fan-out (fleet queue ok without EXECUTE)\n purge --site-id ID [--edge-id ID]\n dns-sync --site-id ID [--apply-zone]\n probe | dashboard | health-loop [--apply-zone]\n from-project --project-id ID [--edge-id ID…]\nHonesty: apply_status written/queued ≠ edge nginx applied until agent ack / EXECUTE reload.\n" } } } }, "from-project": { "--project-id": { "id": { "--edge-id": { "a96f42": "用法： ysk-server cdn from-project --project-id ID [--edge-id ID]…\n" } } } } }, "agents": { "fleet": { "remove": { "--session": { "session": { "1827fe": "用法： ysk-server agents fleet remove --session SESSION_ID\n" } } }, "register": { "--id": { "agent": { "209b2d": "用法： ysk-server agents fleet register --id AGENT_ID [--group g] [--edge]\n" } } }, "commands": { "--session": { "session": { "f8067c": "用法： ysk-server agents fleet commands --session SESSION_ID\n" } } } }, "register": { "--id": { "agent": { "id": { "3c4477": "用法： ysk-server agents register --id AGENT_ID [--group g]\n" } } } }, "commands": { "--session": { "session": { "id": { "e620d2": "用法： ysk-server agents commands --session SESSION_ID\n" } } } }, "runtimes": { "probe": { "fleet": { "list": { "261fa4": "用法： ysk-server agents [runtimes|probe|fleet list|fleet register|fleet commands|register|commands]\n" } } } } }, "agent": { "run": { "--control-plane": { "url": { "--id": { "cfefbe": "用法： ysk-server agent run --control-plane URL --id AGENT_ID [--group g]\n" } } } } }, "ask": { "check": { "system": { "info": { "b0c781": "用法： ysk-server ask \"check system info\"\n" } } } }, "backup": { "delete": { "--project-id": { "id": { "--name": { "d66c29": "用法： ysk-server backup delete --project-id ID --name ARCHIVE\n" } } } }, "restic": { "list": { "run": { "restore": { "10402b": "用法： ysk-server backup restic list|run|restore …\n" } } }, "restore": { "--project-id": { "id": { "a8f133": "用法： ysk-server backup restic restore --project-id ID --snapshot SNAP [--dry-run] [--overwrite-home --confirm PHRASE]\n" } } } }, "sub": { "--data-dir": { "path": { "--json": { "777243": "用法： ysk-server backup [--data-dir PATH] [--json]\n all Backup all project homes (+ remote/restic side when configured)\n list [--project-id ID] [--q TEXT]\n status Last run + schedule probe\n restore --project-id ID --name ARCHIVE [--mode full|web|dry-run]\n delete --project-id ID --name ARCHIVE\n schedule [--cron \"0 3 * * *\"] [--install]\n control-plane Snapshot ysk.json + config.json\n control-plane-restore --name ARCHIVE [--mode dry-run|full] [--confirm RESTORE-CONTROL-PLANE]\n settings [get|set] Remote / exclusions / restic\n set --remote-kind local|sftp|s3 --remote-path P [--remote-host H] …\n set --exclude a,b,c | --exclusions-file FILE\n set --restic-enable --restic-password P [--restic-repo PATH]\n set --from-json FILE # full patch {remote?,exclusions?,restic?}\n restic list|run|restore Incremental restic helpers\n" } } } }, "control-plane-restore": { "--name": { "archive": { "--mode": { "316a76": "用法： ysk-server backup control-plane-restore --name ARCHIVE [--mode dry-run|full] [--confirm RESTORE-CONTROL-PLANE]\n" } } } }, "restore": { "--project-id": { "id": { "--name": { "bc7041": "用法： ysk-server backup restore --project-id ID --name ARCHIVE [--mode full|web|dry-run]\n" } } } } }, "packages": { "list": { "--q": { "text": { "b8e16b": "用法： ysk-server packages list [--q text]\n" } } } }, "projects": { "stop": { "--id": { "projectid": { "b15409": "用法： ysk-server projects stop --id \n" } } }, "backup": { "--id": { "projectid": { "e62846": "用法： ysk-server projects backup --id \n" } } }, "health": { "--id": { "projectid": { "e816ec": "用法： ysk-server projects health --id \n" } } }, "isolation": { "provision": { "--id": { "projectid": { "5aff44": "用法： ysk-server projects isolation provision --id \n ysk-server projects isolation provision-all [--limit 20]\n" } } }, "backfill-owners": { "--owner-user-id": { "id": { "8691da": "用法： ysk-server projects isolation backfill-owners --owner-user-id \n" } } }, "list": { "provision": { "provision-all": { "8e9da3": "用法： ysk-server projects isolation list|provision|provision-all|backfill-owners\n" } } } }, "get": { "--id": { "projectid": { "name": { "b0d532": "用法： ysk-server projects get --id [--json]\n" } } } }, "create": { "--name": { "name": { "--domain": { "66e857": "用法： ysk-server projects create --name [--domain d] [--runtime node|php|static|python|go|rust] [--template id] [--create-dns] [--create-mail] [--server-ip A.B.C.D] [--server-ipv6 ADDR]\n" } } } }, "deploy": { "--id": { "projectid": { "--entry": { "339111": "用法： ysk-server projects deploy --id [--entry f] [--port N] [--fpm|--builtin] [--reload]\n" } } } }, "git-deploy": { "--id": { "id": { "--git-url": { "a513f5": "用法： ysk-server projects git-deploy --id ID [--git-url URL] [--branch main] [--no-redeploy] [--depth 1] [--entry f]\n" } } } }, "template": { "--id": { "projectid": { "--template": { "591ce4": "用法： ysk-server projects template --id --template [--force]\n" } } } }, "list": { "get": { "create": { "deploy": { "253b48": "用法： ysk-server projects list|get|create|deploy|git-deploy|stop|backup|template|ftp|health [options]\n deploy --id UUID [--entry f] [--port N] [--fpm|--builtin] [--reload]\n git-deploy --id UUID [--git-url URL] [--branch B] [--no-redeploy]\n ftp --id UUID --password P [--user NAME] [--home app|root]\n" } } } } }, "cli": { "name": { "db-cluster": { "get": { "--id": { "00f803": "用法： {{CLI_NAME}} db-cluster get --id UUID [--json]\n" } }, "plan": { "--id": { "483f52": "用法： {{CLI_NAME}} db-cluster plan --id UUID [--json]\n" } }, "artifacts": { "--id": { "6b33c4": "用法： {{CLI_NAME}} db-cluster artifacts --id UUID [--json]\n" } }, "bundle": { "--id": { "94ed27": "用法： {{CLI_NAME}} db-cluster bundle --id UUID [--json]\n" } }, "delete": { "--id": { "3de0e4": "用法： {{CLI_NAME}} db-cluster delete --id UUID [--json]\n" } }, "create": { "--name": { "e3b733": "用法： {{CLI_NAME}} db-cluster create --name N --engine mariadb --kind mariadb-galera --member HOST=role[:access] ...\n" } }, "apply": { "--id": { "4cddb8": "用法： {{CLI_NAME}} db-cluster apply --id UUID [--execute] [--bootstrap] [--json]\n" } }, "probe": { "--id": { "22870c": "用法： {{CLI_NAME}} db-cluster probe --id UUID [--peers] [--json]\n" } }, "install-peers": { "--id": { "600b02": "用法： {{CLI_NAME}} db-cluster install-peers --id UUID [--execute] [--no-restart] [--identity ID] [--json]\n" } }, "push": { "--id": { "697080": "用法： {{CLI_NAME}} db-cluster push --id UUID [--member ID] [--identity ID] [--execute] [--json]\n" } }, "fleet": { "--id": { "239462": "用法： {{CLI_NAME}} db-cluster fleet --id UUID [--op apply|probe|plan] [--execute] [--edge-execute] [--json]\n" } }, "list": { "get": { "3b9cfa": "用法： {{CLI_NAME}} db-cluster list|get|create|plan|apply|probe|install-peers|artifacts|bundle|push|fleet|overview|delete [--peers] [--execute] [--json]\n" } } }, "ssh-key": { "get": { "--id": { "292716": "用法： {{CLI_NAME}} ssh-key get --id UUID [--json]\n" } }, "public": { "--id": { "525d7d": "用法： {{CLI_NAME}} ssh-key public --id UUID\n" } }, "export": { "--id": { "0a6d81": "用法： {{CLI_NAME}} ssh-key export --id UUID [--out PATH] [--json]\n" } }, "delete": { "--id": { "a6e2f2": "用法： {{CLI_NAME}} ssh-key delete --id UUID [--json]\n" } }, "create": { "--name": { "8b1d79": "用法： {{CLI_NAME}} ssh-key create --name N [--algo ed25519|rsa-4096] [--purpose user|panel|unbound] [--project ID] [--user U] [--home PATH] [--reveal] [--json]\n" } }, "import": { "--name": { "6eb800": "用法： {{CLI_NAME}} ssh-key import --name N --file PATH [--purpose panel|user] [--json]\n" } }, "install": { "--id": { "b99c56": "用法： {{CLI_NAME}} ssh-key install --id UUID [--execute] [--json]\n" } }, "test": { "--id": { "e1aed3": "用法： {{CLI_NAME}} ssh-key test --id UUID --target user@host[:port] [--execute] [--json]\n" } }, "rotate": { "--id": { "9c3224": "用法： {{CLI_NAME}} ssh-key rotate --id UUID [--reveal] [--json]\n" } }, "authorize-self": { "--id": { "b7ea2e": "用法： {{CLI_NAME}} ssh-key authorize-self --id UUID [--json]\n" } }, "uninstall": { "--id": { "afcba0": "用法： {{CLI_NAME}} ssh-key uninstall --id UUID [--execute] [--json]\n" } }, "list": { "get": { "2c92c6": "用法： {{CLI_NAME}} ssh-key list|get|create|import|public|export|install|test|rotate|authorize-self|uninstall|delete [--json]\n" } } }, "ssh-2fa": { "reveal": { "--id": { "a6c27f": "用法： {{CLI_NAME}} ssh-2fa reveal --id UUID [--json]\n" } }, "retire": { "--id": { "6e1fa3": "用法： {{CLI_NAME}} ssh-2fa retire --id UUID [--json]\n" } }, "enroll": { "--user": { "081432": "用法： {{CLI_NAME}} ssh-2fa enroll --user LINUX|--project ID [--home PATH] [--from-panel] [--json]\n" } }, "confirm": { "--id": { "9ee8a2": "用法： {{CLI_NAME}} ssh-2fa confirm --id UUID --code 123456 [--json]\n" } }, "install": { "--id": { "dace06": "用法： {{CLI_NAME}} ssh-2fa install --id UUID [--execute] [--json]\n" } }, "uninstall": { "--id": { "0bb464": "用法： {{CLI_NAME}} ssh-2fa uninstall --id UUID [--execute] [--json]\n" } }, "list": { "enroll": { "802ed0": "用法： {{CLI_NAME}} ssh-2fa list|enroll|confirm|install|uninstall|pam|reveal|retire [--json]\n" } } }, "ssl": { "list": { "get": { "79c232": "用法： {{CLI_NAME}} ssl list|get --domain X [--json]\n" } }, "get": { "--domain": { "91c444": "用法： {{CLI_NAME}} ssl get --domain example.com [--json]\n" } } }, "dns": { "zone": { "--zone": { "ad30fa": "用法： {{CLI_NAME}} dns zone --zone example.com --ip A.B.C.D [--ipv6 X:X::X] [--validate] [--reload]\n" } }, "zones": { "zone": { "5b8bda": "用法： {{CLI_NAME}} dns zones|zone --zone X --ip A.B.C.D [--ipv6 …] [--json]\n" } } }, "nginx": { "status": { "list": { "d67a16": "用法： {{CLI_NAME}} nginx status|list|test|sync [--execute] [--json]\n" } } }, "host": { "overview": { "metrics": { "93c828": "用法： {{CLI_NAME}} host overview|metrics|network [--path /] [--json]\n" } } }, "logs": { "sources": { "overview": { "79058c": "用法： {{CLI_NAME}} logs sources|overview|units|journal|query [--source id] [--json]\n" } } }, "services": { "sub": { "--unit": { "4fe3fa": "用法： {{CLI_NAME}} services {{sub}} --unit [--execute] [--json]\n" } }, "matrix": { "start": { "4f3a35": "用法： {{CLI_NAME}} services matrix|start|stop|restart|reload --unit NAME [--execute] [--json]\n" } } }, "defense": { "ban": { "--ip": { "cc22de": "用法： {{CLI_NAME}} defense ban --ip [--method fail2ban|ufw|both] [--reason t] [--execute]\n" } }, "unban": { "--ip": { "46aa23": "用法： {{CLI_NAME}} defense unban --ip [--method fail2ban|ufw|both] [--execute]\n" } }, "whitelist": { "--action": { "c1cbdf": "用法： {{CLI_NAME}} defense whitelist --action list|add|remove [--ip IP]\n" } }, "status": { "bans": { "a8d96b": "用法： {{CLI_NAME}} defense status|bans|suspects|ban|unban|whitelist|stack-apply|fail2ban|firewall|timeline|presets [--json]\n bans [--q text] [--source fail2ban|panel|ufw|auto]\n suspects [--q text]\n stack-apply [--execute] # UFW + fail2ban + current preset\n fail2ban | firewall # deep probes (honest)\n timeline [--limit N] [--q text]\n presets # list + activePreset\n" } } } } }, "system": { "unit-install": { "--enable": { "--data-dir": { "path": { "33daa1": "用法： ysk-server system unit-install [--enable] [--data-dir PATH]\n" } } } } }, "users": { "create": { "--username": { "u": { "--password": { "7145c7": "用法： ysk-server users create --username --password

[--role operator|viewer|admin] [--package-id id]\n" } } } }, "list": { "--q": { "text": { "--role": { "544685": "用法： ysk-server users list [--q text] [--role admin|operator|viewer]\n ysk-server users create --username u --password p [--role operator]\n" } } } } }, "rbac": { "list": { "policies": { "330ade": "用法： ysk-server rbac list|policies\n ysk-server rbac show --role operator\n ysk-server rbac audit # route→cap sample matrix\n" } } }, "hosting": { "postgres-provision": { "--db": { "name": { "--user": { "2c8889": "用法： ysk-server hosting postgres-provision --db NAME --user U --password P(min8) [--execute]\n Default dry-run (no host change). Pass --execute + YSK_EXECUTE=1 to apply.\n" } } } }, "mysql-provision": { "--db": { "name": { "--user": { "fc25aa": "用法： ysk-server hosting mysql-provision --db NAME --user U --password P(min8) [--execute]\n Default dry-run (no host change). Pass --execute + YSK_EXECUTE=1 to apply.\n" } } } }, "dns-zone": { "--zone": { "example": { "com": { "bdaa0d": "用法： ysk-server hosting dns-zone --zone example.com --ip A.B.C.D [--ipv6 X:X::X] [--validate] [--reload]\n" } } } }, "powerdns-load": { "--zone": { "example": { "com": { "dba49c": "用法： ysk-server hosting powerdns-load --zone example.com --ip A.B.C.D [--ipv6 X:X::X] [--load|--execute]\n" } } } }, "email-apply": { "--domain": { "example": { "com": { "37d350": "用法： ysk-server hosting email-apply --domain example.com [--install|--execute]\n" } } } }, "email-mailbox": { "--domain": { "x": { "--local": { "3d9be3": "用法： ysk-server hosting email-mailbox --domain X --local user [--password P] [--ip A.B.C.D]\n" } } } }, "ftps-apply": { "--domain": { "files": { "example": { "284a7c": "用法： ysk-server hosting ftps-apply --domain files.example.com [--install|--execute]\n" } } } }, "webmail-apply": { "--domain": { "webmail": { "example": { "2ad5b5": "用法： ysk-server hosting webmail-apply --domain webmail.example.com [--download]\n" } } } }, "public-files": { "--domain": { "files": { "example": { "0e9013": "用法： ysk-server hosting public-files --domain files.example.com [--reload]\n" } } } }, "email-deliverability": { "--domain": { "example": { "com": { "8774a4": "用法： ysk-server hosting email-deliverability --domain example.com\n ysk-server hosting email-deliverability --id \n" } } } }, "email-bootstrap": { "--domain": { "example": { "com": { "796da5": "用法： ysk-server hosting email-bootstrap --domain example.com --ip 1.2.3.4 [--admin postmaster] [--password P] [--install]\n" } } } } }, "migrate": { "post": { "--job": { "id": { "--data-dir": { "6a73cd": "用法： ysk-server migrate post --job --data-dir PATH --execute\n" } } } }, "host": { "--target": { "root": { "new": { "3e94a2": "用法： ysk-server migrate host --target root@NEW_IP [--identity-file PATH|--identity-id ID] [--password] --execute --data-dir PATH\n" } } } } }, "x": { "972912": "用法：\n ysk-server migrate inventory [--data-dir PATH] --json\n ysk-server migrate host --target root@IP [--identity-file PATH|--identity-id ID|--password PW] --execute [--maintenance] [--force-wipe-target]\n ysk-server migrate post --job ID --data-dir PATH --execute # 在目标机\n ysk-server migrate status [--job ID]\n ysk-server migrate resume --job ID --execute\n ysk-server migrate orphan-homes [--data-dir PATH] --json\n ysk-server migrate orphan-homes --path /home/ysk-server-UUID --confirm PATH --execute\n" }, "hostingHelp": "用法：ysk-server hosting \n 危险操作默认 dry-run；加 --execute（+ YSK_EXECUTE=1）才真正应用\n nginx | nginx-sync [--execute]\n redis-provision | postgres-provision | mysql-provision [--execute]\n dns-zone --zone X --ip A.B.C.D [--ipv6 X:X::X] [--validate] [--reload]\n dns-zones | powerdns-status | powerdns-install [--install|--execute]\n powerdns-load --zone X --ip A.B.C.D [--load|--execute]\n email-apply --domain X [--install|--execute]\n email-mailbox --domain X --local user [--password P] [--ip A.B.C.D] [--system]\n ftps-apply --domain X [--install|--execute]\n runtimes | runtime-install --kind node|php|python|go|rust --version V [--install|--execute]\n dovecot-passdb --domain X | --all\n webmail-apply --domain webmail.example.com [--download]\n public-files --domain files.example.com [--reload]\n email-bootstrap --domain example.com --ip A.B.C.D [--install|--execute]\n email-deliverability --domain example.com # PTR/DNSBL/warmup 诚实报告\n firewall-apply [--smtp] [--execute]\n", "logsQuery": "用法：{{CLI_NAME}} logs query --source [--lines N] [--grep G] [--since 1h] [--priority err]\n source 例：journal: journal:nginx.service file:syslog project:\n {{CLI_NAME}} logs sources --json\n {{CLI_NAME}} logs journal [--unit nginx.service] --json\n" }, "msg": { "domain": { "missing": { "pass": { "5be09b": "缺少域名 — 请传 --ip 以先创建域名\n" } } }, "--root": { "must": { "be": { "a84834": "--root 必须是 public 或 project:\n" } } }, "need": { "--content": { "or": { "4d7001": "需要 --content 或 --file\n" } }, "at": { "least": { "7d311a": "至少需要一个 --member HOST[=role][:access]\n" } } }, "action": { "must": { "be": { "ba14c1": "action 必须是 list|add|remove\n" } } }, "use": { "ysk-server": { "backup": { "ca67f4": "请用：ysk-server backup control-plane-restore --name ARCHIVE（不要用 restore --project-id control-plane）\n" } } }, "new": { "domain": { "requires": { "986b78": "新域名需要 --ip A.B.C.D（不要用占位默认）\n" } } }, "import-sync": { "prefers": { "fleet": { "4d7590": "import-sync 优先使用 fleet clusterSync payload；或 --file snapshot.json\n" } } }, "security": { "control": { "plane": { "f59a63": "安全：控制平面绑定公开地址 (0.0.0.0/::)。建议 127.0.0.1 + 反向代理 / UFW。\n" } } } }, "err": { "unknown": { "email": { "sub": { "sub": { "e37257": "未知 email 子命令： {{sub}}\n执行： ysk-server email help\n" } } }, "cron": { "sub": { "sub": { "e1a9ed": "未知 cron 子命令： {{sub}}\n执行： ysk-server cron help\n" } } }, "files": { "sub": { "sub": { "07ad7e": "未知 files 子命令： {{sub}}\n执行： ysk-server files help\n" } } }, "store": { "sub": { "sub": { "b7a083": "未知 store 子命令： {{sub}}\n执行： ysk-server store help\n" } } }, "cdn": { "subcommand": { "sub": { "76664f": "未知 cdn 子命令： {{sub}}\n执行： ysk-server cdn help\n" } } }, "backup": { "subcommand": { "sub": { "4092ad": "未知 backup 子命令： {{sub}}\n执行： ysk-server backup help\n" } } } } }, "setup": { "dryRunOk": "{{product}} setup dry-run 成功", "dryRunNext": "再次执行时请去掉 --dry-run，以写入配置并初始化数据库", "weakPassword": "管理员密码过弱或仍为默认。请传入强密码 --admin-password（至少 8 位，勿用 admin／常见默认），或本机开发设 YSK_ALLOW_INSECURE_DEFAULTS=1。", "weakPasswordShort": "已拒绝过弱或默认管理员密码", "nextStart": "启动（API + Web UI）：{{cli}} serve --config {{configPath}}", "nextOpen": "打开 http://{{host}}:{{port}}/ 并以 {{user}} 登录", "nextUnit": "Systemd unit 模板：{{unitPath}}", "nextInstall": "安装 unit（root + YSK_EXECUTE）：{{cli}} system unit-install --enable --data-dir {{dataDir}}", "nextExecute": "生产主机变更需要 YSK_EXECUTE=1 与 root", "nextGolive": "上线：docs/deploy/go-live.md + ysk-server readiness --json", "secPassword": "安全：请立即更改管理员密码（bootstrap 使用了弱／默认密码）", "sec2fa": "安全：请在「账号安全 → 账户」启用管理员 2FA", "secListen": "安全：正在监听所有接口 — 请放防火墙／反向代理之后；管理建议 127.0.0.1 + SSH tunnel", "ok": "{{product}} setup 完成（数据库已初始化）", "okInsecure": "{{product}} setup 完成（数据库已初始化）［不安全 bootstrap — 请改密码］" } }, "common": { "all": "全部", "cancel": "取消", "confirm": "确认", "refresh": "刷新", "loading": "加载中…", "save": "保存", "apply": "应用", "close": "关闭", "copy": "复制", "copied": "已复制", "expandAll": "全部展开", "collapseAll": "全部折叠", "empty": "无数据", "back": "返回", "showTechnical": "显示技术详情", "hideTechnical": "隐藏技术详情", "needExecute": "需要 YSK_EXECUTE", "needRoot": "需要 root", "needExecuteRoot": "需要 YSK_EXECUTE 与 root", "writtenOnly": "已写入管理文件，未套用到系统", "applyToLive": "套用后才生效", "saveDraft": "保存草稿", "languageName": "简体中文", "languageNative": "简体中文", "language": "语言", "switchLanguage": "切换语言", "showPassword": "展示", "hidePassword": "隐藏", "searchGlobal": "搜索页面与资源…", "menu": "菜单", "processing": "处理中…", "unavailable": "目前不可用", "retry": "重试", "success": "成功", "ok": "正常", "failed": "失败", "blocked": "无法执行", "status": "状态", "port": "端口", "url": "网址", "actions": "操作", "noData": "没有数据", "input": "输入", "pleaseEnter": "请输入 {{value}}", "pleaseFill": "请填写", "required": "必填", "about": "说明", "more": "更多的", "operation": "操作", "delete": "删除", "edit": "编辑", "create": "创建", "install": "安装", "installing": "安装中…", "reprobe": "重新探测", "search": "搜索", "yes": "是", "no": "否", "on": "开", "off": "关", "open": "开启", "enabled": "已启用", "disabled": "已停用", "installed": "已安装", "notInstalled": "未安装", "running": "运行中", "stopped": "已停止", "ready": "就绪", "unknown": "未知", "normal": "正常", "degraded": "降级", "missing": "缺少", "available": "可用", "applied": "已套用", "notApplied": "未套用", "completed": "已完成", "incomplete": "未完成", "probed": "已探测", "notProbed": "未探测", "probe": "探测", "name": "名称", "username": "用户名", "password": "密码", "domain": "域名", "host": "主机", "version": "版本", "type": "类型", "mode": "模式", "notes": "备注", "time": "时间", "steps": "步骤", "target": "目标", "package": "软件包", "panel": "面板", "system": "系统", "user": "用户", "project": "项目", "database": "数据库", "mail": "邮件", "files": "文件", "memory": "内存", "custom": "自定义", "static": "静态", "lifecycle": "生命周期", "loadFailed": "加载失败", "saveFailed": "保存失败", "opFailed": "操作失败", "installFailed": "安装失败", "createFailed": "创建失败", "deleteFailed": "删除失败", "applyFailed": "应用失败", "startFailed": "启动失败", "statusLoadFailed": "状态加载失败", "downloadFailed": "下载失败", "uploadDone": "已上传 {{count}} 个文件", "downloadStarted": "已开始下载 {{name}}", "savedOk": "已保存", "noneSelectedShort": "—", "unknownError": "未知错误", "writtenSettings": "已写入设置", "panelBlocked": "无法在管理面板完成此操作", "partialSuccess": "操作未完全成功", "createdOk": "已创建", "updatedOk": "已更新", "deletedOk": "已删除", "applyDone": "应用完成", "applyIncomplete": "应用未完成", "checking": "检查中…", "dismiss": "關閉", "hide": "隱藏", "show": "顯示", "done": "完成", "next": "下一步", "previous": "上一步", "redirectedTo": "已转到 {{to}}（原为 {{from}}）" }, "cron": { "presetCdTrue": "cd app + true（测试）", "presetCleanTmp": "清理暂存（示例）", "presetNpmCron": "npm run cron（若有）", "presetAppBin": "执行 app binary", "presetRsync": "同步静态（示例 rsync）", "noLinuxUser": "（未有 linux 用户）· {{name}}", "projectUser": "项目用户", "panelUser": "ysk · 面板／系统", "system": "系统", "rootCareful": "root · 系统（慎用）", "customUser": "{{user}} · 自定义", "success": "成功", "failed": "失败", "noProjects": "尚未有项目", "noProjectsHint": "请先创建项目并（建议）创建系统用户，再登记 cron", "userSuffix": " · 用户 ", "mon": "一", "tue": "二", "wed": "三", "thu": "四", "fri": "五", "sat": "六", "sun": "日", "everyNMin": "每 N 分钟", "fixedInterval": "固定间隔", "hourly": "每小时", "atMinute": "指定第幾分", "daily": "每日", "atTime": "指定时:分", "weekly": "每周", "weekdayTime": "星期 + 时间", "monthly": "每月", "dayTime": "日期 + 时间", "advanced": "高级", "customExpr": "自定义表达式", "everyMinute": "每分钟", "everyMinutes": "每 {{n}} 分钟", "hourlyAt": "每小时 第 {{n}} 分", "dailyAt": "每日 {{time}}", "weeklyNone": "每周（未选日） {{time}}", "weeklyAt": "每周{{days}} {{time}}", "monthlyAt": "每月 {{day}} 日 {{time}}", "customAt": "自定义：{{expr}}", "frequency": "计划频率", "interval": "间隔", "fromHour": "由整点起算", "intervalMinutes": "间隔分钟", "min1": "1 分", "minN": "{{n}} 分", "minuteOfHour": "在每小时的第幾分", "minPad": "{{n}} 分", "hour": "小时", "minute": "分钟", "pickWeekdays": "选擇星期", "dayOfMonth": "每月第幾日", "dayOfMonthHint": "31 日月份沒有该日則跳过", "cronExpr": "Crontab 表达式", "cronExprHint": "五栏：分 时 日 月 周（0=日）", "cronExprPh": "crontab 表达式", "needLinuxUser": "所选项目沒有 Linux 用户 — 请先到项目资源创建系统用户", "boundProject": "已绑项目；执行用户 {{user}}（指令会以 runuser 隔離）", "systemJob": "系统工作；执行用户 {{user}}", "writtenManage": "已写入管理 crontab（尚未安装到系统）", "needInstall": "请按「安装到系统 crontab」才会真正生效", "createdManageOnly": "已创建（僅管理档）", "installedSystem": "已安装到系统", "hostSynced": "系统已同步", "hostNotInstalled": "未装到系统", "statusUnknown": "状态未知", "systemCrontab": "系统 crontab", "synced": "已同步", "managedLines": "管理行数", "jobsOnlyManage": "工作只写在管理档。系统 crontab ", "hostHasYsk": "已包含 YSK 项目", "hostNoYsk": "尚未安装或无 YSK 项目", "pressInstall": "有已登记但未写入系统的任务 — 请点「安装到系统」。", "jobsTab": "工作 ({{count}})", "jobsTabPending": "工作 ({{count}}) · 待安装 {{pending}}", "registeredJobs": "已登记工作 ({{count}})", "jobsSub": "管理档项目 · 改动后需「安装到系统」才生效", "addJob": "+ 新增工作", "noCron": "尚未有 cron", "noCronDesc": "用列表右上角新增工作，再安装到系统 crontab", "onceInstalled": "曾安装", "manageOnly": "僅管理档", "projectLabel": "项目", "systemLevel": "系统级", "runOnce": "立即执行", "runOnceOk": "已执行一次", "updatedManage": "已更新管理档；请重新安装到系统 crontab", "updatedManageShort": "已更新管理档", "deletedManage": "已从管理档删除；请重新安装同步系统", "installStatus": "安装状态", "manageVsHost": "管理档 vs 主机", "hostYsk": "主机 YSK", "lastInstall": "上次安装", "installToSystem": "安装到系统 crontab", "installHint": "安装会合并主机 crontab：保留非 YSK 行，只更新面板管理的任务。需系统变更权限。", "hostPreview": "主机 crontab 预览", "cannotRead": "无法读取或尚未安装（需权限）", "addJobTitle": "新增工作", "addJobDesc": "写入管理档；需「安装到系统」后 crontab 才会执行", "createManageOnly": "创建（僅管理档）", "whenRun": "何时执行", "whenRunHint": "用下方卡片揀频率与时间；高级模式可手写 crontab", "userPathHint": "用户 + 指令路径会跟项目 home／runtime 更新", "pickProject": "— 请选擇项目 —", "runAsUser": "执行用户", "runAsHint": "揀项目用户会同步上方项目；揀系统用户則为系统级 cron", "noProjectsYet": "（尚未有项目）", "runInHome": "在项目 home 下执行（{{home}}）；保存时会包 runuser", "absPath": "建议絕对路径", "commonCmds": "常用指令（{{runtime}}）", "actualPreview": "实際写入 crontab（预览）", "noLinuxName": "此项目未有 Linux 用户名 — 请到项目「资源」创建系统用户后再试。", "afterCreate": "创建后：", "projectParen": "（项目 {{name}}）", "systemParen": "（系统级，未绑项目）", "weekLabel": "星期", "willRun": "将执行", "projectNoLinux": "（未有 linux 用户）", "createManageOnlyParen": "创建（僅管理档）", "runAsHintFull": "选项目用户会同步上方项目；选系统用户則为系统级 cron", "systemParenFull": "（系统级，未綁项目）", "hostOtherLines": "主机非 YSK 行数", "hostOtherLinesVal": "其他 {{other}} 行（主机有效共 {{total}}）", "deleteTitle": "删除 Cron 工作？", "deleteDesc": "将删除「{{name}}」。应用到系统 crontab 前只影响控制面。", "hostJobs": "主机任务", "hostJobsTitle": "主机 crontab（{{count}}）", "usersScanned": "用户", "filterUser": "用户", "filterAll": "全部用户", "sourceYsk": "面板", "sourceHost": "主机", "noHostJobs": "此范围没有 crontab 任务", "hostPartial": "无法完整读取所有用户 crontab（需要 root）", "pendingInstall": "待安装到系统（{{count}}）", "pendingStale": "已 {{days}} 日未写入系统 crontab，不会执行。", "willNotRun": "未写入系统 crontab — 不会执行。", "hourRange": "小时必须介于 0–23。", "minuteRange": "分钟必须介于 0–59。", "hoursCommon": "常用小时", "hoursAll": "全部小时", "invalidExpr": "不是有效的 5 栏 cron 表达式。", "needCommand": "请填写指令。", "needUser": "请选择专案或系统用户。", "hostCounts": "主机行数", "hostCountsVal": "{{ysk}} · 其他 {{other}} · 合计 {{total}}", "hostYskYes": "已有面板行", "hostYskNo": "尚无面板行", "emptyHostCrontab": "用户 {{user}} 尚未有 crontab。", "writtenOnHost": "已写入", "registeredJobsChip": "已登记", "registeredVsWritten": "已在面板登记 vs 已写入主机 crontab", "installPreviewTitle": "安装到系统前预览", "installPreviewDesc": "会把 YSK 区块合并入主机 crontab，不会覆写非 YSK 行。", "installPreviewMerge": "安装会写入 YSK Server crontab merge 区块，不会整份取代 host crontab。", "installPreviewEmpty": "没有待安装工作 — 仍会重新整理 YSK 区块。", "editJobTitle": "编辑工作", "editJobDesc": "变更只写入控制面，须再安装到系统 crontab 才生效。", "saveJob": "储存（仅管理）", "panelLines": "面板行", "otherLines": "非面板行", "totalLines": "合计", "writtenOnHostHint": "已写入主机 crontab 的行", "registeredJobsHint": "已在面板登记的工作（含待安装）", "pendingInstallCount": "{{n}} 项待安装", "systemJobBadge": "未绑专案 · 系统用户", "hostEdit": "修改", "hostEditTitle": "修改主机 crontab 行", "hostEditDesc": "立即写入该用户的线上 crontab。需要 root 与 YSK_EXECUTE=1。其他行不变。", "hostSave": "写入 crontab", "hostSaveTitle": "写入此 crontab 行？", "hostSaveDesc": "Replaces the live line for {{user}}. Type EDIT to confirm.\n\nCurrent:\n{{from}}\n\nNext:\n{{to}}", "hostDisable": "停用", "hostDisableTitle": "停用主机 crontab 行？", "hostDisableDesc": "会把 {{user}} 该行改成注解。请输入 DISABLE 确认。", "hostEnable": "启用", "hostEnableTitle": "启用主机 crontab 行？", "hostEnableDesc": "会移除 {{user}} 该行的注解。请输入 ENABLE 确认。", "hostRunTitle": "试跑此主机指令一次？", "hostRunDesc": "立即以 {{user}} 执行。不会改 crontab。请输入 RUN 确认。", "hostAdopt": "纳入面板", "hostAdoptTitle": "把此主机行纳入面板？", "hostAdoptDesc": "会在线上行加上 # ysk:id 并登记。下一轮安装不会重复。请输入 ADOPT 确认。", "hostDeleteTitle": "移除主机 crontab 行？", "hostDeleteDesc": "会移除 {{user}} 的线上行。请输入该指令确认。", "hostUserLocked": "crontab 拥有者（此处不能搬到其他用户）", "hostLinePreview": "将写入的行", "disabledJob": "已停用", "confirmMismatch": "确认内容必须与指令相同。", "writtenHost": "已写入主机 crontab", "adoptedHost": "已纳入面板", "keepDisabledHint": "此行已停用。储存后仍保持注解。", "currentLine": "现时", "nextLine": "下一行" }, "dashboard": { "serviceAria": "{{name}}：{{state}}", "sev": { "ok": "成功", "warn": "警告", "bad": "异常" }, "title": "控制台", "health": "健康状态", "protection": "保护模式", "welcome": "欢迎使用 YSK Server", "audit": "最近审计", "needLogin": "请先登录以查看审计记录", "features": "功能菜单", "featuresHint": "角标：就绪＝软件已装；未安装＝需一键安装；需权限＝未开系统变更。", "badge": { "panel": "面板", "notInstalled": "未安装", "ready": "就绪", "installed": "已装", "prodReady": "可生产", "check": "检查", "needPerm": "需权限" }, "status": { "healthy": "健康", "prodReady": "可生产", "needsCheck": "需检查" }, "stat": { "backups": "备份", "notifications": "通知", "certExpiry": "证书到期" }, "tabs": { "overview": "概览", "wizard": "一键创建", "notifications": "通知", "features": "功能入口" }, "serviceHealth": "服务健康", "serviceHealthDesc": "systemctl 实时探测", "fullServiceMatrix": "完整服务矩阵", "readinessCheck": "就绪检查：", "prodOk": "可作生产", "notFullyReady": "尚未完全就绪", "readinessBlocked": "有 {{n}} 项阻挡", "modeScore": "模式 {{mode}} · 分数 {{ready}}/{{total}}", "mode": { "degraded": "降级", "production_capable": "可生产", "blocked": "有阻挡", "normal": "正常" }, "details": "详情", "certExpiryTitle": "证书到期：", "certExpired": "已过期", "certDays": "{{days}} 天", "securityStrip": "安全与套用状态", "securityStripDesc": "真实通知 + apply 诚实审计（written ≠ applied）", "notifCount": "通知 {{count}}", "criticalCount": " · 严重 {{count}}", "warnCount": " · 警告 {{count}}", "applyAuditBadge": "套用 audit · ok {{ok}} · warn {{warn}} · bad {{bad}}", "executeBadge": "系统变更 {{state}}", "executeLabel": "系统变更", "publicNo2fa": "面板正听全部界面，而你的管理员账号未开 2FA。", "go": "前往", "open": "打开", "noCriticalWarn": "目前无严重／警告通知", "notifCenter": "通知中心", "noHealthYet": "尚未取得健康状态", "sysChange": "系统变更", "opened": "已开", "closed": "未开", "readinessLink": "就绪检查 →", "hostMetrics": "主机指标", "loadAvg": "Load average（1 · 5 · 15 分）", "memoryDash": "内存 —", "metricsLink": "详细指标 →", "runningOf": "运行 {{running}}/{{total}}", "noProjects": "尚未有项目", "wizardLink": "一键创建 →", "allProjects": "全部项目 →", "recentN": "最近 {{n}}", "runningCount": "运行中 {{n}}", "securityLink": "安全 →", "wizardTitle": "一键创建", "wizardDesc": "创建项目，并可选一并登记 DNS／邮件／数据库草稿（各项需再到对应页套用）", "projectName": "项目名称", "projectNameHint": "控制台显示名称；会生成对应目录", "nameRequired": "请输入专案名称", "domainOptional": "域名（可留空）", "domainHint": "填写后才可勾选 DNS 与邮件", "runtime": "运行环境", "runtimeHint": "决定默认 runtime 版本与部署方式", "runtimeVersion": "运行环境版本", "versionHint": "会写入项目的运行环境版本设定", "serverIpv4": "服务器 IPv4", "serverIpv4Hint": "DNS A／邮件 SPF", "serverIpv4Ph": "此主机公网 IPv4", "serverIpv6": "服务器 IPv6（可选）", "serverIpv6Hint": "有则写 AAAA／ip6:", "serverIpv6Ph": "公网 IPv6（可留空）", "needDomainFirst": "请先填域名", "withDns": "一并创建 DNS 区域", "withDnsDesc": "需填写域名；仅登记，需到 DNS 页写入区域文件", "withMail": "一并登记邮件域名", "withMailDesc": "需填写域名；软件安装与 DNS 在邮件详情页完成", "withDb": "一并创建 MySQL 数据库草稿", "withDbDesc": "控制面登记；需到 SQL 引擎页套用到系统", "wizardHint": "一键创建不会自动对外上线。DNS、邮件、数据库与 SSL 请到各功能页确认并套用。", "wizardSubmit": "一键创建", "wizardOk": "创建完成", "wizardPartial": "部分失败", "notifCenterTitle": "通知中心（{{count}}）", "notifCenterDesc": "严重 {{critical}} · 警告 {{warn}} · 信息 {{info}}", "noNotifs": "暂无通知", "noNotifsDesc": "系统告警与待办会显示于此", "applyAuditTitle": "套用状态审计", "applyAuditDesc": "好的 {{ok}} · 警告 {{warn}} · 不好 {{bad}}", "barTitle": "{{count}} 条主机提示", "levelCritical": "严重", "levelWarn": "警告", "levelInfo": "信息", "colTitle": "提示", "colDetail": "详情", "colSource": "来源", "notifSearch": "搜索通知", "notifAll": "全部", "notifDismiss": "隐藏", "goFix": "前往处理" }, "dataTable": { "empty": "没有数据", "actions": "操作" }, "db": { "serviceSettings": "服务设置", "installedOk": "{{engine}} 已安装", "startedOk": "{{engine}} 已启动", "installFirst": "请先安装 {{engine}}", "softwareMissing": "{{engine}} 所需软件尚未安装", "serviceOverview": "服务概览", "readonlyStatus": "只读状态", "readonlyProbe": "只读探测", "systemChange": "系统变更", "opened": "已开启", "notOpened": "未开启", "admin": "管理员", "client": "客户端", "hasClient": "有", "noClient": "无", "canProvision": "可开庫", "dumpOk": "导出完成", "dumpFailed": "导出失败", "noDumpToImport": "尚无可导入的备份文件", "expiredTempUsersProcessed": "已处理过期临时用户", "dumpFirstDb": "导出首个数据库", "importLatestDump": "导入最新备份", "cleanupExpiredTempUsers": "清理过期临时用户", "adminerEntry": "数据库管理项目", "browserProjectTitle": "创建数据库管理项目", "browserTool": "工具", "browserNameHint": "会创建一个 PHP 项目；名称不可重复", "browserNameTaken": "项目名称已存在：{{name}}", "browserProjectCreated": "数据库管理项目已创建", "createBrowserProject": "创建项目并部署", "downloadPhpMyAdmin": "下载 phpMyAdmin（需要系统变更权限及外网）", "createDatabase": "创建数据库", "installBannerHint": "请使用上方横幅「一键安装」安装 {{engine}}。", "exclusiveMariaHint": "此主机为 MariaDB。请到 MariaDB 页管理，或一键切换（须输入 SWITCH）。", "exclusiveMysqlHint": "此主机为 MySQL。请到 MySQL 页管理，或一键切换（须输入 SWITCH）。", "openMaria": "MariaDB", "openMysql": "MySQL", "openMariaService": "MariaDB 服务", "openMysqlService": "MySQL 服务", "startService": "启动服务", "openServiceConsole": "开启服务控制台", "opsResult": "操作结果", "tempPasswordOnce": "临时只读密码（只显示一次）：", "tabDatabases": "数据库 ({{count}})", "tabUsers": "用户 ({{count}})", "tabTemp": "临时只读 ({{count}})", "tabRemote": "远程主机 ({{count}})", "dbList": "数据库列表", "charset": "字符集", "noDatabasesYet": "尚未有数据库", "emptyDbInstallFirst": "请先使用上方横幅一键安装 {{engine}}，再用右上角「创建数据库」", "emptyDbCannotProvision": "目前无法在服务器创建数据库", "emptyDbCreateHint": "用右上角「创建数据库」新增；创建后请再按「应用」", "emptyDbHostHasRows": "主機已有資料庫，但尚未在控制面登記。", "registeredVsHostHint": "已在面板登记 / 主机实测", "registeredCount": "已登记", "hostCount": "主机", "registeredUsers": "已登记用户", "registeredUsersHint": "只计面板登记，不是主机全部 MySQL 账号", "hostStillExists": "主机仍存在", "expiresLabel": "到期", "dumpNeedRegistered": "请先在面板登记数据库", "dumpFirstDbTitle": "导出第一个已登记数据库", "importNeedRegistered": "请先在面板登记数据库", "importLatestNeedConfirm": "需确认 — 会导入到已登记数据库", "hostHasUntracked": "主機另有 {{count}} 個未在面板登記的資料庫", "hostInventoryHint": "列表只顯示控制面已登記的資料庫；即時名稱來自 SHOW DATABASES。", "userList": "用户列表", "userListDesc": "可为数据库授权用户", "createUserBtn": "+ 创建用户", "noUsersYet": "尚未有用户", "tempReadonlyUsers": "临时只读用户", "tempReadonlyDesc": "到期后控制面标记 expired；系统 DROP 需另开权限操作（标示）", "dbName": "数据库名称", "ttlHours": "有效时数", "ttlHoursHint": "到期后标记失效", "createReadonlyUser": "创建只读用户", "tempUserCreated": "已创建临时只读用户", "expiresAt": "到期", "revokeRegistration": "撤销登记", "remoteDbHosts": "远程数据库主机", "remoteDbHostsDesc": "登记连接目标（密码不回显）。未按「测试连接」前，已保存 ≠ 可达。", "remoteTest": "测试连接", "remoteTestDone": "远程主机探测完成", "remoteTestOk": "可达", "remoteTestFail": "不可达", "remoteNotChecked": "未测试", "remoteDeleteTitle": "仅移除登记", "remoteDeleteConfirm": "移除登记 {{name}}？远程服务器不会被改动。", "displayName": "显示名称", "prodReplicaPlaceholder": "生产从库", "remoteHostSaved": "已保存远程主机", "createDbTitle": "创建 {{engine}} 数据库", "createDbDesc": "创建控制面登记后，请按「应用」写入服务器", "dbNameHint": "小写英数与下划线；创建后需再应用到系统", "alsoCreateUser": "同时创建用户", "alsoCreateUserDesc": "一并创建可连接此庫的账号", "passwordMin8": "至少 8 位", "passwordMin8chars": "至少 8 字符", "allowConnectHost": "允许连接主机", "allowConnectHostHint": "常用 %（任意）或 localhost", "allowConnectHostHintShort": "常用 % 或 localhost", "createDbHint": "仅写入控制面登记；列表按「应用」才会在服务器 CREATE DATABASE。", "createUserTitle": "创建 {{engine}} 用户", "createUserDesc": "创建后请应用", "bindDatabase": "绑定数据库", "bindDatabaseHint": "可选；授权此庫权限", "noneOption": "— 无 —", "importDumpTitle": "确认导入数据库备份？", "importDumpDesc": "将把备份「{{dump}}」导入数据库「{{db}}」。", "import": "导入", "importOk": "导入完成", "importFailed": "导入失败", "deleteDbTitle": "删除数据库登记？", "deleteDbDesc": "仅移除控制面记录；不会自动 DROP 服务器上的庫。", "deleteUserTitle": "删除用户登记？", "deleteUserDesc": "仅移除控制面记录。", "adminerTitle": "Adminer 数据库浏览器", "adminerDesc": "下载輕量 Adminer + 写入 Nginx 管理 conf；应用到系统才会 nginx -t + reload", "adminerWritten": "Adminer 已写入管理档", "adminerApplied": "Adminer 应用完成", "writeOnly": "只写入（written）", "applyToSystem": "应用到系统", "adminerRisk": "公开 Adminer 有风险 — 请先限制来源 IP 或加 HTTP 认证。需 PHP-FPM socket（默认 php8.2）。", "vhostName": "虚拟主机名", "vhostHint": "DNS A 指到此主机后才能从外网开", "downloadAdminer": "下载 Adminer PHP（需 YSK_EXECUTE + 外网）", "downloadAdminerDesc": "关闭則仅用已下载文件", "adminerWriteHint": "「只写入」= 管理档 written；「应用到系统」= 复制 conf + nginx -t + reload（需 root，否則 blocked）", "pgInstallBanner": "请先使用上方横幅一键安装 PostgreSQL", "pgEmptyCreateHint": "创建后按「应用到系统」写入服务器", "pgNoDbs": "尚未有 PostgreSQL 庫", "pgCreateTitle": "创建 PostgreSQL 数据库", "pgCreateDesc": "写入控制面登记；需再「应用到系统」才 CREATE DATABASE（应用后才上线）", "pgAlsoCreateRole": "同时创建角色", "pgAlsoCreateRoleDesc": "一并创建登录角色并授予此数据库权限", "roleName": "角色名称", "roleHint": "PostgreSQL role／登录用户", "pgDeleteDbDesc": "移除控制面记录（不会自动 DROP 服务器上的庫，除非另有应用撤销）。", "update": "更新", "alsoCreateRole": "同时创建角色", "cluster": { "standaloneOtherEngines": "此引擎目前是单机。其他引擎已有丛集：{{names}}。", "roleUnassigned": "未指派角色", "title": "集群", "description": "计划 → 写管理档 → 应用 → 探测 → peer 分发 / fleet。默认 dry-run。", "redirectedFromCluster": "你由 /cluster 转到此处。这是数据库丛集分页。", "notApplied": "尚未套用", "plannedAt": "建立于 {{when}}", "clearStalePlans": "清过期计划", "clearStalePlansTitle": "删除过期计划？", "clearStalePlansDesc": "将删除 {{n}} 个超过 7 日的计划／草稿登记。不会套用或推送，亦不改系统设定。", "landingTitle": "数据库丛集", "landingDesc": "No database engine is installed on this host. Open an engine page to install, then return here.", "landingNoneInstalled": "MySQL, MariaDB, PostgreSQL, and Redis are not installed. /cluster does not open a MySQL tab when MySQL is missing.", "openEngine": "开启 {{engine}}", "overviewPill": "丛集 {{n}}", "enginesInstalled": "引擎", "plannedCount": "已计划", "overviewList": "丛集（{{count}}）", "overviewEmpty": "尚未有丛集登记。", "engine": "引擎", "kind": "类型", "members": "成员", "kindGalera": "简易 Galera", "kindMysqlReplica": "MySQL 主从复制", "kindPgReplica": "PostgreSQL 流式复制", "kindRedisReplica": "Redis 主从", "createGalera": "创建简易 Galera", "createMysqlReplica": "创建主从复制", "createPgReplica": "创建流式复制", "createSentinel": "创建 Sentinel", "createRedisReplica": "创建 Redis 主从", "needRealIps": "请填写本机与 peer 真实 IP／主机名", "hostInvalid": "请填写有效的 IPv4、IPv6 或主机名。", "statusNote": "状态：{{status}}（计划成功 ≠ 集群健康）", "artifactNote": "产物：{{dir}}", "planGenerated": "已生成计划（dry-run）", "planUpdated": "已更新计划", "manageWritten": "已写管理档（dry-run）", "bootstrapTried": "已嘗試 bootstrap", "applyTried": "已嘗試应用系统 conf", "localOk": "本机 OK", "localProbeFail": "本机 probe 未过", "probedWithPeers": "已探测（含 peer）", "probedLocal": "已探测本机", "peerTarNote": "已下载 peer 打包（.tar.gz）— 解壓后在 peer 上安装 conf", "downloaded": "已下载", "peerPushed": "已推送 peer", "pushPlanGenerated": "已生成 push 计划", "registrationDeleted": "已删除登记", "nodes": "节点", "remoteInstallPlan": "远程安装计划", "fleetSession": "机群 agent session id", "fleetSessionHint": "可选。到 /agents 复制 session UUID。填写后该对等节点走机群（不用 SSH）。留空则 scp。", "fleetSessionPh": "Agents 页的 session UUID", "fleetSessionNone": "无 — 使用 SSH", "fleetSessionOpenAgents": "打开 /agents 注册会话", "createWizardTitle": "打开计划向导。需要本地 IP 和 ≥1 个对等点。仅写入面板工件（试运行）。在您申请之前不要重新启动发动机。", "bootstrap": "引导程序", "fleetApply": "车队申请", "planTitle": "重新生成集群计划（不更改主机）", "writeFileTitle": "在面板数据目录下写入管理文件（试运行）", "probeLocalTitle": "仅探测该主机", "probeAllTitle": "探查每一位注册会员", "bootstrapTitle": "安装本地插件并引导第一个节点", "remoteInstallPlanTitle": "预览远程安装（不执行）", "downloadBundleTitle": "下载对等配置包 (.tar.gz)", "pushPlanTitle": "预览推送到对等点（无 scp）", "fleetSyncPlanTitle": "预览队列同步（不执行）", "fleetApplyTitle": "队列适用于车队成员吗？", "status": { "healthy": "健康", "planned": "计划", "partial": "部分的", "failed": "失败的", "draft": "草稿", "degraded": "降级", "applied": "应用" }, "fleetSyncPlan": "Fleet sync 计划", "standaloneTitle": "目前：单机", "standaloneRepl": "未登记主从／流式。指定 primary/master + replica 后生成 conf 与脚本。", "standaloneHa": "未登记 HA。加 peer 节点后生成 conf 计划，再分步 bootstrap / join。", "recentProbe": "最近 probe（本机 wsrep）", "probeRequired": "healthy 必须 probe 通过", "planPreview": "计划预览", "planPreviewDesc": "dry-run · 成功只代表步骤/conf 已生成", "files": "文件", "systemChangeNeed": "应用时需要", "planModalDesc": "选擇节点 → 生成计划（不会自动改 peer 系统）", "generatePlan": "生成计划", "clusterName": "集群名称", "localIp": "本机 IP／主机", "primaryIpHint": "控制面所在机（primary/master + access=local）", "localIpHint": "控制面所在机（access=local）", "ipExample1": "例如 10.0.0.1", "ipExample2": "例如 10.0.0.2", "ipExample3": "例如 10.0.0.3", "replicaIp": "Replica IP／主机", "peerIp": "Peer IP／主机", "replicaHint": "从库节点", "peerHint": "第二节点（Galera 建议 3 节点）", "thirdNode": "第 3 节点（可选）", "thirdNodeHint": "Galera / 多 replica 建议填", "sstMethod": "SST 方式", "forbidDemoIp": "禁止示例 IP（203.0.113.x）。", "fwGalera": "防火墙内网开 3306 / 4567 / 4444 / 4568。", "fwPg": "流式需内网 5432；脚本密码改 CHANGE_ME。", "fwRedis": "Redis 内网 6379（sentinel 26379）。", "fwRepl": "主从需内网对应埠；脚本密码改 CHANGE_ME。", "needExecuteRoot": "应用系统 conf 需 YSK_EXECUTE=1 + root。", "topology": "拓撲：{{kind}}", "applyLocalTitle": "应用本机系统 conf？", "applyBootstrapDesc": "会安装 Galera drop-in 并 bootstrap（galera_new_cluster）。仅第一个节点用一次。", "applyJoinDesc": "会安装 Galera drop-in 并 systemctl restart mariadb", "confirmApply": "确认应用", "deleteClusterTitle": "删除集群登记「{{name}}」（{{engine}}）？", "remoteInstallTitle": "远程安装 peer？", "pushTitle": "Push 到 peer？", "fleetSyncTitle": "Fleet 同步？", "confirmOp": "确认操作", "deleteClusterDesc": "将删除 {{engine}} 集群「{{name}}」的登记。系统 conf 不会自动清（v1）。", "remoteInstallDesc": "在 peer 上 install conf + restart。需 YSK_EXECUTE + SSH。", "pushDesc": "scp 文件到 peer /tmp？需 YSK_EXECUTE=1 与 SSH key。成功 ≠ peer 已 restart。", "fleetSyncDesc": "同步 cluster 快照到 fleet 边緣，再可 apply。", "fleetApplyDesc": "enqueue apply 到 fleet 成员。", "remoteInstalled": "远程已安装", "fleetSynced": "Fleet 已同步排队", "fleetApplyQueued": "Fleet apply 已排队", "engineNotInstalled": "此主机上未安装 {{engine}} - 请先安装它，或打开实际运行的引擎。", "plan": "计划", "writeFile": "写文件", "applyLocal": "应用本机", "probeAll": "全节点探测", "remoteInstall": "远程安装", "downloadBundle": "下载包", "pushPlan": "Push 计划", "pushExecute": "Push 执行", "fleetSync": "Fleet 同步", "localConfPreview": "本机 conf 预览", "refresh": "刷新", "close": "关闭", "cancel": "取消", "delete": "删除", "probe": "探测", "name": "名称", "type": "类型" }, "console": { "dataBrowse": "资料浏览", "dbManage": "数据库管理", "realtime": "实时", "reload": "重载", "needRestart": "需重启", "affectsProjects": "使用此引擎的站点与服务会中断。", "lifecycle": "生命周期", "overview": "概览", "actionDone": "已{{action}}", "installDone": "安装完成", "noChanges": "沒有变更可应用", "settingsApplied": "设置已应用", "notReadFromService": "未从服务读取", "applyMode": "应用方式：{{mode}}", "dirtyNotApplied": "已修改，尚未应用", "highRisk": "高风险设置", "engine": "引擎", "bootEnabled": "开机自启", "uptimeSec": "运行秒数", "currentConnections": "目前连接", "changes": "变更", "serviceTitle": "{{title}} 服务", "softwareMissing": "{{title}} 所需软件尚未安装", "overviewDesc": "只读资讯，由探测取得（非输入欄）", "lifecycleDesc": "安装、启动、停止与开机自启", "about": "说明", "cluster": "集群", "noSettings": "此分类暂无可用设置（或目前版本不支持）", "applyHint": "「实时」可在线修改；「需重启」应用后请到生命周期重启服务。藍色底为尚未应用的变更。", "applyCategory": "应用本分类", "applyAll": "应用全部变更", "applyCatCount": "应用本分类（{{n}}）", "applyAllCount": "应用全部变更（{{n}}）", "lifecycleNote": "设置分页中，「实时」可在线修改；「需重启」应用后请到生命周期重启服务。", "installEngine": "请使用上方橫幅「一鍵安装」安装 {{title}}。", "reloadConfig": "重载设置", "disableBoot": "取消自启", "disableBootConfirm": "重新启动后引擎将不会启动，直到您再次启用它。", "needRights": "需要系统变更权限与管理员身分。失败会显示原因，不会假装成功。", "noneFetched": "— 未取得 —" }, "importEntry": "入口: {{url}}", "adminerRiskFull": "公开 Adminer 有风险 — 请先限制来源 IP 或加 HTTP 认证。需 PHP-FPM socket（预设 php8.2）。", "adminerWriteHintFull": "「只写入」= 管理档 written；「应用到系统」= 复制 conf + nginx -t + reload（需 root，否則 blocked）", "pgInstalled": "PostgreSQL 已安装", "pgStarted": "PostgreSQL 已启动", "notInstalledShort": "未装", "serviceConsole": "服务控制台", "installPgFirst": "请先安装 PostgreSQL", "pgSoftwareMissing": "PostgreSQL 所需软件尚未安装", "installPgBanner": "请使用上方橫幅「一鍵安装」安装 PostgreSQL。", "createPlus": "+ 创建", "dbNameHintPg": "小写英数与底线；创建后请再应用到系统", "deleteNotePg": "删除登记不会自动 DROP 服务器上的庫；应用成功才代表主机已执行 DDL。", "tabDatabasesSimple": "数据库 ({{count}})", "frozenTitle": "数据库服务需要修复", "frozenBody": "已检测到问题（模式／冻结：{{mode}}；数据目录为空：{{empty}}）。系统会按健康检查结果生成修复计划，而不是只针对单一错误硬编码。", "unfreezeBtn": "检查并修复服务", "unfreezeConfirmTitle": "确认修复 {{engine}}？", "unfreezeConfirmDesc": "将按诊断结果执行通用修复计划（停止服务、清除冻结、清理错误引擎配置、空白目录初始化、再启动）。数据目录是否为空：{{empty}}。若有重要数据请先备份。", "unfreezeConfirmBtn": "确认修复", "unfreezeOk": "{{engine}} 修复完成", "startAfterUnfreeze": "启动服务（失败时会自动套用修复计划）", "serviceDownTitle": "数据库服务未运行", "serviceDownBody": "服务异常。面板会诊断常见原因（冻结、配置残留、空白数据目录、端口冲突等）。数据目录为空：{{empty}}。请按「检查并修复服务」确认执行。", "adoptHostDb": "登记 {{name}}", "adoptHostDbTitle": "只在控制面登记名称，不改主机数据", "cleanupExpiredTempUsersTitle": "清除已过期的面板临时用户", "invalidSqlIdent": "请用小写识别名称：以英文字母开头，其后可为字母、数字或底线。", "remoteHostRequired": "请填写远端主机。", "remoteTestUnsaved": "请先储存此主机，再按“测试连线”。或填好主机后储存。", "serverNotInstalled": "服务器未安装", "dumpNeedEngine": "请先安装数据库引擎，才可汇出数据库。", "unboundDatabase": "数据库登记已移除", "userGoneRefresh": "该用户已不存在，已重新整理列表。" }, "dialogs": { "confirmDefault": "确认", "cancelDefault": "取消", "severity": { "consequencesTitle": "将会发生：", "typeToConfirm": "请输入「{{text}}」以确认" } }, "dns": { "templates": { "minimal": "最小 — 仅 apex A", "web": "网站 — apex + www", "mail": "邮件 — apex + mail + MX + SPF", "full": "完整 — web + mail + ftp + SPF", "cdn": "CDN — apex + www + cdn（多 edge 预留）" }, "dnssecOk": "已生成 DNSSEC 密钥（written — 未签署 zone／未上 registrar）", "dnssecNotOk": "DNSSEC 未生成密钥（只写说明文件或工具不可用 — 不假成功）", "dnssecFailed": "DNSSEC 失败", "blocked": "已封锁（需系统变更权限）", "clusterDone": "完成（{{status}}）", "clusterPartial": "未全部成功（{{status}}）— 见下方明细", "clusterFailed": "集群操作失败", "validateFailed": "记录验证失败", "validateRequestFailed": "验证请求失败", "lookupFailed": "查询失败", "statRecords": "记录", "statSelected": "选中", "notInstalled": "DNS 所需软件尚未安装", "dsForRegistrar": "DS（供 registrar，未自动发布）：", "tabs": { "zones": "区域", "records": "记录", "cluster": "集群", "dnssec": "DNSSEC", "tools": "工具", "ddns": "DDNS", "about": "说明" }, "recentWrite": "最近写入结果", "zonesTitle": "区域 ({{count}})", "zonesDesc": "创建区域后可写入／套用 zone", "createZone": "+ 创建区域", "mailZonesMissing": "電郵網域尚未建立 DNS 區域：{{domains}}。", "createMailZone": "建立郵件區域", "colZoneName": "区域名称", "colServerIp": "服务器 IP", "colTemplate": "模板", "colStatus": "状态", "emptyZonesTitle": "尚未有 DNS 区域", "emptyZonesDesc": "用列表右上角「创建区域」新增", "applyZoneTitle": "写入 zone 文件并挂入 PowerDNS named.conf + rediscover（写文件≠ dig 有答案）", "applyZone": "写入／套用", "recordsFor": "记录 — {{zone}}", "recordsNeedSelect": "记录（请先在「区域」选取）", "statusLabel": "状态", "addRecord": "+ 新增记录", "writeZoneFile": "写入并加载区域", "healthLoaded": "已加载", "stateLoaded": "已加载", "healthPublicNs": "公网 NS", "statePublicNs": "公网 NS", "publicNsHere": "→ 本机", "requestLeTitle": "申请 {{zone}} Let’s Encrypt", "requestZoneSsl": "申请本区域 SSL", "soaTitle": "SOA / 默认 TTL", "soaDesc": "写入 zone 文件时的 SOA 名称服务器与 $TTL；保存后再「写入区域文件」才落到磁盘", "soaBlockNs": "名称服务器", "soaBlockTiming": "TTL 与定时", "recordsListTitle": "DNS 记录（{{count}}）", "recordsListDesc": "编辑后记得按上方「写入区域文件」才会更新 named 磁盘文件。", "soaNsLabel": "SOA 名称服务器", "soaNsHint": "可留空 → 默认 ns1.区域.", "defaultTtl": "默认 TTL（秒）", "min1": "1 分", "min5": "5 分", "min10": "10 分", "hour1": "1 时", "day1": "1 日", "customSeconds": "自定义秒数", "soaSaved": "已保存 SOA 设定（控制面）— 请「写入区域文件」套用", "soaSaveFailed": "保存 SOA 失败", "soaSavedAndWritten": "已保存并写入区域文件", "soaWriteFailed": "SOA 写入失败", "failed": "失败", "colType": "类型", "colName": "名称", "colValue": "值", "emptyRecords": "尚无记录", "noZoneSelectedTitle": "尚未选择区域", "noZoneSelectedDesc": "到「区域」分页点选一个 zone", "clusterTitle": "DNS 集群", "clusterDesc": "SCP 推送 zone 文件后可 remote reload（rndc / named / bind9 / pdns）。written ≠ applied。", "peerHost": "Peer 主机", "peerHostHint": "次要 NS 主机名称或 IP（需 SSH 密钥登录）", "sshUser": "SSH 用户", "sshUserHint": "需有目标路径写入与 reload 权限", "labelOptional": "标签（可选）", "labelPlaceholder": "例如 ns2 / hkg-edge-dns", "opPerPeer": "本次操作（每 peer）", "registeredPeers": "已登记 peers（{{count}}）", "lastProbeHint": "lastProbe 于「探活」或推送后更新", "noPeers": "尚未登记任何 peer", "zoneDirMissing": "· zone 目录缺失", "generateKeys": "生成密钥；不自动上线", "selectZoneFirst": "请先选择区域", "lookupTitle": "DNS 查询（dig）", "lookupDesc": "对公网解析器查询；用于验证 multi-A / CDN 是否生效。不假造答案。", "lookupNamePlaceholder": "例如 example.com 或 www.example.com", "lookupType": "查询类型", "lookupResults": "查询结果（{{count}} 笔）", "lookupNoAnswerFail": "查询无答案／失败", "digNotInstalled": "dig 未安装", "digNotInstalledHint": "此分页需要 dig（bind9-dnsutils）。这不是 NXDOMAIN。请在主机用套件管理安装 bind9-dnsutils；本页不会自动安装。", "method": "方法：{{method}}", "noAnswers": "没有答案", "noAnswersDesc": "NXDOMAIN、空 RRset 或解析失败", "lookupOkHint": "以上为即时查询结果。CDN multi-A 应看到多个 IP；健康摘除后应减少。", "lookupFailHint": "查询失败或无答案。请确认名称、类型与上游解析器。", "validateTitle": "记录验证", "validateDesc": "新增／编辑时自动验证（CNAME 冲突、A/AAAA 格式等）。", "createZoneTitle": "创建 DNS 区域", "createZoneDesc": "依模板生成记录", "createZoneNeedValid": "请输入有效的区域名称与 IPv4 位址", "zoneNameHint": "例如 example.com（不含结尾点）", "invalidZone": "区域名称无效。使用真实域名（例如 example.com）。", "invalidIpv4": "IPv4 无效。每个八位位组必须为 0–255。", "serverIpv4": "服务器 IPv4", "serverIpv4Hint": "模板 A 记录使用的地址", "thisHostIpv4": "此主机公网 IPv4", "serverIpv6Optional": "服务器 IPv6（可选）", "serverIpv6Hint": "有公网 v6 时写入 AAAA；可留空", "thisHostIpv6": "此主机公网 IPv6（可留空）", "soaNsCreateHint": "可留空，默认 ns1.区域名称", "defaultTtlLabel": "默认 TTL", "defaultTtlHint": "SOA 与新记录默认", "recordTemplate": "记录模板", "editRecord": "编辑记录", "addRecordTitle": "新增记录", "recordModalDesc": "区域 {{zone}} · 保存后需再写入区域文件", "recordType": "DNS 记录类型", "nameHint": "@ = 根域名；www = 子域名", "mxPlaceholder": "例如 10 mail.example.com.", "spfPlaceholder": "例如 v=spf1 a mx ip4:… ip6:… ~all", "needIpv6": "请填 IPv6 地址", "needIpv4": "请填 IPv4 地址", "valueHint": "IP、主机名或对应内容", "ipv6Address": "IPv6 地址", "ipv4Address": "IPv4 地址", "cacheTime": "缓存时间", "deleteZoneTitle": "删除区域？", "deleteZoneDesc": "会一并删除其 DNS 记录登记。", "deleteRecordTitle": "删除记录？", "deleteRecordDesc": "移除后请写入区域文件", "addPeer": "新增 peer", "probe": "探活", "pushZones": "推送 zones", "reloadRemote": "remote reload", "generateDnssec": "生成 DNSSEC 密钥", "lookup": "查询", "saveSoa": "保存 SOA", "saveSoaAndWrite": "保存并写入区域文件", "saveSoaSettings": "保存 SOA 设定", "saveSoaAndWriteBtn": "保存并写入区域文件", "goToZones": "前往区域", "refresh": "刷新", "pushReload": "推送 + reload", "pushOnly": "仅推送（不 reload）", "reloadOnly": "仅 remote reload", "probePeers": "探活 peers", "clusterDefaultHint": "默认推送后在对等节点重新加载 DNS；需本机已开启系统变更权限。", "notProbed": "尚未探活", "probeHealthy": "探活：{{status}}", "pushReloadShort": "推送+reload", "dnssecCardDesc": "生成密钥／DS；若 dataDir 有 zone 文件会尝试 dnssec-signzone。DS 不会自动上 registrar。", "currentZone": "当前区域：", "generateAndSign": "生成密钥并尝试签署 zone", "lookupName": "名称", "fillCurrentZone": "填入当前区域", "lookupToolHint": "优先使用主机上的 dig；若无 dig 则 fallback 至 node dns。结果反映查询当下解析器所见，不等于 panel 内记录。", "validateExtra": "error 会挡保存；warn（如 apex CNAME）只提示。", "createAfterHint": "创建后请在「记录」分页检视并「写入区域文件」才会落到磁盘。", "valueLabel": "值", "ttlHint": "缓存时间", "soaSavedControl": "已保存 SOA 设定（控制面）— 请「写入区域文件」套用", "soaNs2Label": "次要 NS（可选）", "soaNs2Hint": "第二名称服务器 FQDN，例如 ns2.example.com.", "soaHostmaster": "SOA 管理员邮箱（RNAME）", "soaHostmasterHint": "用点代替 @，例如 hostmaster.example.com.", "soaRefresh": "Refresh（秒）", "soaRetry": "Retry（秒）", "soaExpire": "Expire（秒）", "soaMinimum": "Minimum／负缓存 TTL（秒）", "soaTimingHint": "SOA 定时参数（秒）。", "healthTitle": "DNS 服务健康", "healthDesc": "主机真实状态：服务 / 端口 53 / 已写入 zone 文件 / 本机 dig 是否有响应（写入 ≠ 已 reload ≠ 对外 answering）", "healthPillOk": "DNS 正常", "healthPillBad": "DNS 异常", "healthService": "服务", "healthServiceDown": "未运行", "healthListen": "端口 53", "healthWritten": "zone 文件", "healthAnswering": "本机响应", "healthAnsweringYes": "有", "healthAnsweringNo": "无／拒绝", "healthRefresh": "重新探测", "healthProbeLocal": "再探测健康", "healthOpen53": "开放防火墙 53（TCP+UDP）", "healthOpened53": "已请求开放 53 TCP+UDP", "healthOpen53Failed": "开放 53 失败", "healthPortClosed": "未监听 53", "healthPortOpenAlready": "53 似已在听", "healthHint": "dig 被拒时，请先修复 PowerDNS、开放 53，再写入 zone。", "stateService": "服务", "stateListen": "监听", "stateWritten": "已写入", "stateAnswering": "本机 answering", "lookupServer": "查询服务器（@）", "lookupServerHint": "127.0.0.1 = 本机权威；公网 IP 测对外；留空用系统 resolver", "healthHealPdns": "修复 PowerDNS 绑定", "healNeedInstall": "PowerDNS 未安装 - 首先将其安装在“软件”选项卡上", "applyNeedService": "DNS 服务未运行 — 在应用之前启动或安装它", "goStartService": "去启动 DNS 服务", "startBindHint": "若启动后仍未监听，多半是 53 埠被 systemd-resolved 占用。请先按下方“修复绑定”再启动。", "deleteZoneNeedName": "删除此区域 - 您将输入区域名称进行确认", "healthHealPdnsHint": "将 local-address 设为公网 IP，避免与 systemd-resolved 抢 0.0.0.0:53", "healthHealPdnsOk": "PowerDNS 已绑定 {{ip}} 并尝试启动", "healthHealPdnsFailed": "PowerDNS 修复失败", "startProbeFailed": "启动后无法再探测 DNS 健康", "startNotListening": "PowerDNS 启动已回报，但 53 埠未在答", "aboutTitle": "DNS 使用要点", "aboutSub": "区域为主；记录／集群／DNSSEC 需先选域名。", "aboutZonesTitle": "区域与域名范围", "aboutZonesBody": "先在「区域」选域名，再管理该域名的记录、集群、DNSSEC。", "aboutHealthTitle": "服务健康", "aboutHealthBody": "在「工具」探测 PowerDNS、修复绑定、开放 53 端口。", "aboutStackTitle": "软件版本", "aboutStackBody": "在「软件」检查／更新 PowerDNS 套件。", "aboutDdnsTitle": "DDNS", "aboutDdnsBody": "DDNS 分页在本机 WAN 位址变更时更新指定的 A／AAAA。它不取代区域记录编辑。写入并不等于公网解析已生效。", "ddns": { "honesty": "写入成功并非公网 DNS 已传播。解析快取与 registrar NS 仍然有效。空白或私网 IP 不会发布。", "needExecute": "供应商更新需要 root 与 YSK_EXECUTE=1。探测仍会执行。", "lastRun": "上次执行", "nextRun": "下次执行", "wanRemembered": "已记住的 WAN IPv4", "updateNow": "立即更新", "updateTitle": "发布侦测到的 WAN 位址？", "updateDesc": "Calls Cloudflare, nsupdate, or the local zone for each enabled record. Type UPDATE to confirm.", "updated": "DDNS 更新完成", "updateFailed": "DDNS 更新失败", "probe": "探测 WAN", "probed": "WAN 探测完成", "probeFailedUi": "WAN 探测失败", "forceHint": "“立即更新”即使位址未变更也会再发布。探测不会呼叫供应商。", "saved": "已储存", "saveFailed": "无法储存", "deleted": "已移除记录", "emptyTitle": "尚未有 DDNS 记录", "emptyDesc": "在下方新增主机名称。可选 Cloudflare、RFC 2136，或本机 PowerDNS（managedBy=ddns）。", "colFqdn": "主机名称", "colProvider": "供应商", "colPublished": "已发布", "colEnabled": "状态", "colFrom": "由", "colTo": "至", "colWhen": "时间", "colNote": "备注", "pauseRecord": "暂停", "resumeRecord": "恢复", "statusCard": "WAN 状态", "recordsCard": "主机名称", "addCard": "新增主机名称", "settingsCard": "设定", "historyTitle": "近期更新", "historyEmpty": "尚无 DDNS 纪录", "paused": "排程已暂停", "pausedHint": "自动更新已关闭。探测与“立即更新”仍可执行。", "schedulerOn": "自动更新", "schedulerOnHint": "行程内排程，不是 crontab。关闭后不会自动 upsert。", "zone": "区域", "zoneHint": "Leave empty to use the last two labels of the hostname", "zoneSelectHint": "本机已有区域。Cloudflare 与 RFC 2136 可用任意区域名称。", "noLocalZones": "尚无本机区域。若使用本机 PowerDNS，请先在“区域”分页建立。", "providerLocal": "本机 PowerDNS", "proxied": "Cloudflare 代理", "proxiedHint": "Orange cloud。VPN／WireGuard 主机名称请关闭。", "proxiedWarnTitle": "使用 Cloudflare orange cloud？", "proxiedWarnDesc": "Proxied 记录会隐藏来源 IP。VPN 与 WireGuard 主机名称应维持 DNS only。请输入 PROXY 确认。", "addRecord": "新增主机名称", "interval": "间隔（秒）", "intervalHint": "60–86400。行程内排程，不是 crontab。", "cfToken": "Cloudflare API 令牌", "cfTokenHint": "只写不回显。若已设环境变数 CF_API_TOKEN 则使用该值。", "tokenConfigured": "已储存 Cloudflare token。留空则保持原值。", "tokenMissing": "尚未储存 Cloudflare token（仍可使用环境变数 CF_API_TOKEN）。", "rfcServer": "RFC 2136 服务器", "rfcServerHint": "远端服务器需要资料目录内的 TSIG key file。Loopback 可以不签名。密钥不会放进 argv。", "rfcKeyFile": "TSIG 密钥文件", "rfcKeyFileHint": "相对于 DDNS 资料目录，或资料目录下的绝对路径。", "rfcKeyConfigured": "已储存 key file 路径。留空则保持原值。", "primaryFqdn": "主要主机名称", "primaryFqdnHint": "作为 VPN Endpoint 提示。不会改写现有 peers。", "updateIdentity": "记住 WAN IPv4", "updateIdentityHint": "把上次公网 IPv4 存入 DDNS 状态", "vpnHint": "VPN Endpoint 可用 DDNS 主机名称（不会自动改写现有设定）。", "sslHint": "Let's Encrypt HTTP-01 需要主机名称解析到本机。IP 变更后不会自动重签凭证。", "deleteTitle": "移除 DDNS 主机名称？", "deleteDesc": "请输入 {{fqdn}} 确认。不会删除 zone 编辑器里的本机记录。", "err": { "requiresExecute": "发布需要 root 与 YSK_EXECUTE=1。", "missingToken": "缺少 Cloudflare API token。", "rfc2136NeedKey": "远端 RFC 2136 需要资料目录内的 TSIG key file。", "rfc2136KeyMissing": "TSIG key file 不存在，或不在资料目录内。", "noPublicIpv4": "未侦测到公网 IPv4。", "noPublicIpv6": "未侦测到公网 IPv6。", "notPublicIpv4": "侦测到的 IPv4 不是公网位址。", "notPublicIpv6": "侦测到的 IPv6 不是公网位址。", "probeFailed": "公网 IP 探测失败。", "localNoZone": "此主机名称没有对应的本机 DNS 区域。", "localNeedsDb": "本机供应商需要控制平面数据库。", "managedByClash": "该名称由其他功能拥有（不是 DDNS）。", "unknownProvider": "未知的 DDNS 供应商。", "nsupdateFailed": "nsupdate 失败。", "updateFailed": "供应商更新失败。", "invalidFqdn": "主机名称无效。", "invalidType": "类型必须为 A 或 AAAA。", "invalidProvider": "未知供应商。", "notFound": "找不到记录。", "confirmMismatch": "确认内容必须与主机名称相同。", "schedulerDisabled": "DDNS 排程已暂停。", "provider": "供应商回传错误。" } }, "createMailZoneNow": "已建立邮件区域 {{domain}}", "toolsFirewallTitle": "防火墙（UFW）", "toolsFirewallHint": "允许或拒绝 53 端口。不会启动或停止 PowerDNS。", "toolsUnitTitle": "PowerDNS 服务单元", "toolsUnitHint": "systemd 单元 pdns — 启动、停止、重启、重载。", "installConfirmTitle": "安装 PowerDNS？", "installConfirmDesc": "会安装 pdns-server 并写入受管权威配置。需要 root 与 YSK_EXECUTE=1。", "installConfirmConsequence": "安装并启动后，PowerDNS 会绑定 53 端口。", "installPort53Busy": "53 端口已有程序在监听。未停止或修复该监听前，PowerDNS 可能无法绑定。", "installPort53BusyConsequence": "请先修复绑定或停止其他监听，才可预期 53 端口有响应。" }, "docker": { "title": "Docker", "subtitle": "在这台服务器安装 Docker Engine，并管理容器、映像、Volume 与验证者 Compose 堆栈。", "refresh": "刷新", "notInstalled": "未安装 Docker Engine。请在此页安装 docker.io 及 docker-compose-v2。", "protected": "受保护", "pruneConfirm": "输入 PRUNE 以确认清理 volume 或系统", "needEngineTitle": "请先安装 Docker Engine", "stopEngineDesc": "会停止 Docker 引擎及本机全部 {{n}} 个容器。", "notInstalledValue": "未安装", "nameHint": "字母、数字、下划线、点、连字符（最长 128）", "volPlaceholder": "我的数据", "netPlaceholder": "我的网", "runPorts": "发布端口", "runPortsHint": "每行 host:container，例如 8080:80", "runEnv": "环境变量", "runEnvHint": "每行 KEY=value", "runRestart": "重启策略", "runNetwork": "网络", "runVolumes": "Volume", "runVolumesHint": "每行 volume:dest", "runAdvancedHint": "多服务堆栈请用验证者节点，或主机上已有的 Compose 文件。", "daemonConfirmTitle": "应用引擎设置？", "daemonConfirmDesc": "会写入 daemon.json 并重启 docker.service。所有容器都会中断。", "settingsHint": "只开放安全的 daemon.json 选项。应用会写入文件并重启 docker.service。", "cli": { "usage": "用法：ysk-server docker status|ps|images|volumes|networks|df|logs|inspect|exec|start|stop|restart|rm|pull|run|prune|engine|compose [--image IMG] [--name N] [--preset version|help|hostname] [--bin BIN] [--project P] [--execute] [--json]" }, "tab": { "overview": "概览", "containers": "容器", "images": "映像", "compose": "Compose", "volumes": "Volume", "networks": "网络", "prune": "清理", "settings": "设置", "about": "说明" }, "col": { "engine": "引擎", "containers": "容器", "version": "版本", "dataRoot": "数据目录", "disk": "磁盘", "validators": "验证者堆栈", "name": "名称", "image": "映像", "status": "状态", "ports": "端口", "managed": "由面板管理", "size": "大小", "driver": "驱动", "type": "类型", "reclaimable": "可回收" }, "state": { "up": "运行中", "down": "已停止", "running": "运行中", "exited": "已结束", "exitedCode": "已结束（{{n}}）", "restarting": "重启中", "restartingCount": "重启中 · {{n}} 次", "paused": "已暂停", "created": "已建立", "dead": "已失效", "removing": "删除中", "unknown": "未知" }, "df": { "images": "映像", "containers": "容器", "volumes": "本机 volume", "builder": "建置快取", "other": "其他" }, "actions": { "start": "启动", "stop": "停止", "restart": "重启", "remove": "删除", "logs": "日志", "inspect": "检查", "exec": "执行（version）", "run": "运行映像", "pull": "拉取", "up": "启动", "down": "停止", "createVolume": "创建 volume", "createNetwork": "创建网络", "pruneContainers": "清理容器", "pruneImages": "清理映像", "pruneVolumes": "清理 volume", "pruneSystem": "系统清理", "startEngine": "启动引擎", "stopEngine": "停止引擎", "restartEngine": "重启引擎", "applyDaemon": "应用引擎设置" }, "empty": { "containers": "没有容器", "images": "没有映像", "compose": "没有 Compose 项目", "composeDesc": "专案来自验证者节点或主机上已有的 Compose 档。本页不接受任意上载 YAML。", "composeCta": "开启验证者节点", "volumes": "没有 volume", "networks": "没有网络" }, "logs": { "empty": "没有日志", "follow": "跟随" }, "deleteRunningWarn": "此容器仍在运行或重启中，删除会强制移除。", "settings": { "logMaxSize": "容器日志上限", "liveRestore": "即时还原（引擎重启时保留容器）", "mirrors": "Registry 镜像（每行一个网址）", "insecure": "未加密 Registry（每行一个主机）" }, "about": { "body": "Docker 是 YSK Server 的一级主机服务，与 Nginx 同级。由面板用 Ubuntu docker.io + docker-compose-v2 安装。验证者节点以 yskval-* Compose 项目运行。", "honesty": "变更主机需要 root 及 YSK_EXECUTE=1。默认是试运行。此页不是 Kubernetes。", "validators": "打开验证者节点" }, "alerts": { "daemonTitle": "Docker 引擎未运行", "daemonBody": "已安装 Docker，但 docker.service 未启动。验证者堆栈无法启动。" }, "errors": { "notInstalled": "未安装 Docker", "daemonDown": "Docker 引擎未运行", "needCompose": "需要 docker compose（v2 插件）", "badImage": "映像名称无效", "badName": "名称无效", "badPort": "端口映射无效", "badEnv": "环境变量无效", "badVolume": "磁盘挂载无效", "badNetwork": "网络无效", "protectedNetwork": "不可以删除内建 Docker 网络", "badRestart": "重启策略无效", "badPrune": "清理范围无效", "needPruneConfirm": "清理 volume 或系统需要 confirm=PRUNE", "badDaemon": "引擎设置无效", "composeMissing": "找不到这个项目的 Compose 文件", "logsFailed": "读不到容器日志", "mutateFailed": "Docker 命令失败", "engineFailed": "无法控制 docker.service", "badExec": "exec 只限允许清单内的二进制与预设（不可用 shell，不可开 TTY）", "uninstallBusy": "请先停止由面板管理的容器（包括验证者堆栈）再卸载 Docker", "badCommand": "指令或 entrypoint 无效", "portBusy": "主机埠 {{bind}}:{{port}} 已被占用", "nameInUse": "已有名称为 {{name}} 的容器。请先删除或改名。", "unpublished": "容器未挂上网络或未发布埠，不当成已启动。" }, "notes": { "dryMutate": "此为试运行。要改主机请加 --execute 及 YSK_EXECUTE=1。", "dryPrune": "清理预览（未应用）。", "dryEngine": "引擎控制此为试运行。", "dryDaemon": "将写入 /etc/docker/daemon.json 并重启 docker.service。", "daemonWrote": "已写入 daemon.json", "start": "已启动容器", "stop": "已停止容器", "restart": "已重启容器", "remove": "已删除容器", "ran": "已用映像启动容器", "leftoverRemoved": "绑定失败后已删除残留容器 {{name}}", "pulled": "已拉取映像", "exec": "已执行允许清单内的 exec", "imageRemoved": "已删除映像", "volumeCreated": "已创建 volume", "volumeRemoved": "已删除 volume", "networkCreated": "已创建网络", "networkRemoved": "已删除网络", "pruned": "清理完成", "compose": { "up": "已启动 Compose 项目", "down": "已停止 Compose 项目", "restart": "已重启 Compose 项目", "rm": "已删除 Compose 项目" }, "engine": { "start": "已启动 docker.service", "stop": "已停止 docker.service", "restart": "已重启 docker.service" } }, "ui": { "whatYouGet": "此页可以做什么", "whatYouGetLead": "先安装 Docker Engine。之后可以运行单个容器、拉取映像，并查看本机已有的验证者 Compose 堆栈。", "capEngine": "引擎", "capEngineDesc": "一键安装 docker.io 及 docker-compose-v2。可在此页启动或停止 docker.service。", "capWork": "容器与映像", "capWorkDesc": "选择常用映像、拉取、运行，然后查看日志或检查容器。", "capStacks": "验证者堆栈", "capStacksDesc": "多服务堆栈是验证者 Compose 项目（yskval-*）。本页不接受上传 YAML。", "cardEngine": "引擎", "cardDisk": "磁盘", "cardWork": "本机现况", "compose": "Compose", "cgroup": "组组", "used": "已用", "free": "可用", "running": "运行中", "images": "映像", "volumes": "Volume", "networks": "网络", "goImages": "映像", "goValidators": "验证者节点", "imagePickHint": "请选择常用映像。只有需要其他参考名称时，才选「其他」。", "imageCustom": "其他", "driver": "驱动", "driverLocalOnly": "本页只创建 local volume。", "netDefaultDriver": "新建网络使用 Docker 默认的 bridge 驱动。", "pruneWhat": "要清理什么", "pruneAck": "我明白未使用的数据会被删除，并且无法还原", "pruneAckDesc": "清理 volume 或整个系统无法还原。会按所选范围删除已停止的容器与未使用的映像。", "pruneNow": "立即清理", "useMirrors": "使用 Registry 源", "useInsecure": "允许未加密 Registry", "publishPorts": "向主机发布端口", "attachVolume": "挂载 volume", "setEnv": "设置环境变量", "defaultNet": "默认", "mountPath": "挂载路径", "restartNo": "从不", "restartUnless": "除非已停止", "restartAlways": "始终", "restartOnFail": "失败时", "needAck": "清理前请先确认", "scopeContainers": "已停止的容器", "scopeImages": "未使用的映像", "scopeVolumes": "未使用的 volume", "scopeBuilder": "构建缓存", "scopeSystem": "所有未使用项", "noVolumesYet": "尚无 volume — 请先到 Volume 分页创建。", "command": "指令", "commandHint": "选填。映像之后的参数。留空则用映像 CMD。", "entrypoint": "入口点", "entrypointHint": "选填单一程式。留空则用映像 ENTRYPOINT。", "portMap": "主机:容器", "portOccupied": "此主机埠已被占用", "validatorImage": "由验证者页管理", "newVolume": "新建 named volume", "loopbackUrl": "本机测试网址", "nginxProxy": "建立 Nginx 反向代理", "intentPorts": "意图（未发布）", "customPort": "其他主机端口", "customPortHost": "主机端口", "customPortContainer": "容器端口", "pctUsed": "已用 {{n}}%", "customPortHint": "1–65535。例如 9090 → 80。", "pickBridge": "选择 bridge 网络" }, "deleteTitle": "删除 {{id}}", "deleteDesc": "此操作无法复原。", "deleteC1": "会从这台主机移除该资源。", "deleteComposeVal": "这是验证者堆栈 — 验证者实例会一并删除。", "pruneTitle": "清理 Docker 资源", "pruneDesc": "输入 PRUNE 以确认。已删除的数据无法复原。", "pruneC1": "会删除所选范围内未使用的资源。", "pruneC2": "Volume 与系统清理会永久删除未使用的数据卷。", "pruneC3": "会移除此范围内已停止的容器或未使用映像。" }, "email": { "title": "邮件", "subtitle": "域名、DNS、信箱与 Relay", "externalTodos": "Server 以外必须自行处理的事项", "ptr": "反向 DNS（PTR）需由 VPS/云端供应商设定", "port25": "出站 Port 25 可能被云端封锁，需申请解除或使用 Relay", "create": "创建邮件域名", "createHint": "登记域名后可查看 DNS、信箱与健康检查", "domains": "已登记域名", "empty": "尚未登记邮件域名", "emptyHint": "建立域名后可产生 DNS 清单与外部待办", "searchPlaceholder": "搜寻域名…", "domain": "域名", "serverIp": "服务器 IP", "notFound": "找不到此邮件域名", "backToList": "返回邮件域名", "softwareNeeded": "邮件所需软件尚未安装", "applyApplied": "已套用", "applyWritten": "已写入", "applyFailed": "失败", "applyDraft": "草稿", "queueMsgCount": "伫列 {{count}} 封", "queueLoadFailed": "读取伫列失败", "queueFlushRequested": "已请求清空伫列", "queueFlushFailed": "清空失败", "queueDeleted": "已删 {{id}}", "queueDeleteFailed": "删除失败", "pillDomains": "{{count}} 域名", "pillNoDomain": "无域名", "statDomains": "域名", "statHealthy80": "健康≥80", "statApplied": "已套用", "statDraft": "草稿", "tabDomains": "域名", "tabWebmail": "网页邮件", "tabQueue": "伫列", "tabStack": "软件", "tabOps": "分工", "webmailGlobalDesc": "整个面板共用一套网页邮件；所有邮件域名的用户都用同一入口登录。", "webmailGlobalHint": "需要系统变更权限（YSK_EXECUTE）与外网以下载 Roundcube／SnappyMail。未开权限时不会创建半成品项目。", "webmailMovedHint": "网页邮件已改为全站共用设置，不再按单一域名安装。", "openGlobalWebmailSettings": "前往网页邮件设置", "domainsTitle": "域名 ({{filtered}}/{{total}})", "domainsListDesc": "在此主机上注册的邮件域", "emptyFilterHint": "没有符合搜寻的域名", "emptyCreateHint": "用列表右上角“建立”登记域名；成功后进入详情完成一键设定与 DNS。", "queueLocalTitle": "邮件队列", "needExecute": "需 YSK_EXECUTE", "viewQueue": "查看伫列", "flushQueue": "清空伫列", "flushQueueEmpty": "队列为空", "flushQueueNeedExecute": "刷新队列需要YSK_EXECUTE（主机执行权限）", "queueHint": "本机 Postfix 队列。查看是读取探测；清空需要 YSK_EXECUTE。", "deleteThisId": "删除此 ID", "queueEmpty": "无待送邮件", "queueEmptyHint": "目前没有待送邮件", "mtaTitle": "MTA 软件", "mtaBody": "探测与一键安装由上方横幅驱动。列表页不假装已安装。", "mtaSmtp": "SMTP 出站／入站", "mtaImap": "IMAP／POP3 信箱", "mtaDkim": "出站 DKIM 签署", "mtaMissingHint": "缺软件时横幅会显示“一键安装／重新探测”。安装成功 ≠ 域名已可收发。", "pathTitle": "域名设定路径", "path1": "右上角登记域名", "path2": "进入域名详情 → 一键设定邮件", "path3": "DNS 页或外部 checklist 加 MX／SPF／DKIM／DMARC", "path4": "SSL 绑定 mail／webmail 主机名", "viewDomainList": "查看域名列表", "opsPanelTitle": "面板 vs 外部", "opsThisPage": "本页：域名登记、伫列观测、软件探测", "opsDetail": "域名详情：一键 bootstrap、信箱、别名、relay、webmail", "opsHost": "主机商：PTR、Port 25 出站策略", "opsRegistrar": "域名商：MX／SPF／DKIM／DMARC 发布", "statusTitle": "状态", "statusDraft": "draft：仅面板", "deliverabilityChecks": "检查项", "statusWritten": "written：已写管理档，未必套到系统", "statusApplied": "applied：曾成功套用（仍视服务 is-active）", "statusReputation": "国际收件匣信誉永远无法 100% 自动化", "createModalDesc": "", "registerDomain": "创建", "domainApexHint": "不含 mail. 前缀", "serverIpv4Hint": "MX／A／SPF", "serverIpv4Ph": "公网 IPv4", "serverIpv6": "IPv6（可选）", "serverIpv6Hint": "AAAA／SPF ip6", "serverIpv6Ph": "可留空", "registerNote": "", "flushConfirmTitle": "清空全部邮件伫列？", "flushConfirmDesc": "队列中的邮件会被删除，不可复原。", "flushConfirm": "清空", "tabMailbox": "邮箱", "tabAliases": "别名／转发", "tabHealth": "健康", "tabRelay": "中继", "tabSieve": "过滤／SSO", "tabAdvanced": "进阶", "pillApplied": "已套用", "pillManaged": "管理档", "pillDraft": "草稿", "statHealth": "健康", "statApply": "套用", "statDomain": "域名", "pausedFlag": "已暂停（旗标）", "normal": "正常", "statMailboxes": "邮箱", "statDnsRecords": "DNS 纪录", "dnsTodosTitle": "域名系统", "copyAllRecords": "复制全部纪录", "openDnsPage": "开启 DNS 页", "healthScore": "健康分", "healthUnchecked": "尚未檢查", "healthUncheckedHint": "尚未实测 DNS／PTR／25 端口。", "healthPartialScore": "部分评分 {{n}}/100（仅 DNS）", "healthPartialHint": "只计了 DNS 清单 — 即时检查与黑名单尚未测。", "deliverabilityScore": "送达能力检查包", "opendkimNoReload": "OpenDKIM 不支持重载 — 更改密钥或对照表后请用重启。", "opendkimNoReloadTitle": "此堆栈不支持 systemctl reload opendkim", "healthChecklist": "检查清单 {{score}}/100", "healthChecklistHint": "检查清单分数 — 尚未做 DNS／PTR／25 端口实测", "healthLiveHint": "实测分数", "suggestedRecords": "建议纪录数", "externalTodosCount": "外部待办", "colType": "类型", "colName": "名称", "colValue": "值", "colNote": "说明", "copy": "复制", "noDnsRecords": "尚无 DNS 纪录", "externalTodosHeading": "外部待办（面板无法代劳）", "externalTodosBody": "PTR、端口 25、注册商 DNS 须自行完成。", "copyExternalTodos": "复制外部待办清单", "todoDone": "完成", "todoPending": "待办", "refreshDnsHint": "按「重新整理」加载 DNS 建议", "mailboxListTitle": "邮箱列表（{{count}}）", "createMailbox": "+ 建立邮箱", "writeDovecot": "写入 Dovecot 密码库", "noMailboxes": "尚未有邮箱 — 按“建立邮箱”开启对话框", "mailboxOpsResult": "邮箱操作结果", "aliasesTitle": "别名／转发／Catch-all", "aliasType": "类型", "aliasTypeAria": "别名类型", "typeForward": "转发", "typeAlias": "别名", "localPart": "本地部分", "localPartHint": "例如 sales", "targetMailbox": "目标信箱", "targetMailboxHint": "可用逗号分隔多个", "addAlias": "新增别名", "noAliases": "尚未有别名／转发", "aliasResult": "别名结果", "autoreplyTitle": "自动回复／暂停", "autoreplyDesc": "自动回复", "autoreplyBodyHint": "可选「应用到系统」", "enableAutoreply": "启用自动回复", "enableAutoreplyDesc": "vacation.sieve；系统套用后挂 .dovecot.sieve", "applyToSystem": "套用到系统（Postfix／Dovecot）", "applyToSystemDesc": "需 YSK_EXECUTE=1 + root；失败不会假成功", "subject": "主旨", "body": "内文", "saveApplyAutoreply": "储存并套用自动回复", "saveAutoreplyWritten": "储存自动回复（written）", "suspendApply": "暂停并套用 REJECT", "suspendWritten": "暂停域名（written）", "resumeApply": "恢复并更新 map", "resumeWritten": "恢复域名（written）", "flagsResult": "旗标／系统套用结果", "defaultAutoreplySubject": "自动回复", "defaultAutoreplyBody": "已收到您的邮件，稍后回复。", "healthLiveTitle": "寄达健康（真实 DNS／端口探测）", "healthLiveDesc": "即时检查", "serverIpLabel": "服务器 IP", "liveCheck": "即时检查", "liveOk": "大致正常", "liveBad": "有问题", "notTested": "未测", "blacklist": "黑名单", "healthExternalNote": "PTR 与端口 25 须在主机商完成。", "runLiveCheck": "执行 Live 检查", "dnsblThisIp": "DNSBL（本 IP）", "multiIpRbl": "多 IP RBL", "warmupAdvice": "暖身建议", "probeMatrix": "探测结果", "colItem": "项目", "colStatus": "状态", "pass": "通过", "fail": "失败", "unknown": "未知", "colDetail": "详情", "outboundPort25": "出站端口 25", "noProbeResults": "尚无探测结果", "noLiveYet": "尚未执行 Live 检查", "noLiveYetHint": "先执行即时检查", "mailSslTitle": "证书与 TLS", "mailSslHint": "真实签发在 SSL 页完成；此处一键跳到对应主机名（mail / webmail / 域名）", "openSslPage": "开启 SSL 页", "webmailSsoSkeleton": "Webmail SSO 骨架", "writeRoundcubeSso": "写入 Roundcube SSO 骨架", "ssoSkeletonSymlink": "SSO 骨架 + 系统 symlink", "rateLimitTitle": "出站限速／反垃圾", "rateLimitDesc": "真实写入 Postfix anvil 与 Rspamd 设定（需 YSK_EXECUTE + root 才会 applied）", "hourlyMsgCap": "每小时消息上限", "hourlyMsgCapHint": "全局取各域名最小值", "enableAntispam": "启用反垃圾标记（Rspamd multimap）", "enableAntispamDesc": "关则域名标记 antispam off", "writeControlOnly": "只写入控制面", "applyToSystemBtn": "套用到系统", "dnsblResult": "DNSBL 结果", "warmupResult": "暖身结果", "policyResult": "策略结果", "relayTitle": "SMTP 出站中继", "relayHost": "中继主机", "applyRelaySystem": "套用到系统 Postfix", "applyRelaySystemDesc": "写入系统 Postfix 中继", "saveApplyRelay": "储存并套用到系统", "saveOnly": "只储存设定", "relayResult": "中继结果", "webmailSsoTitle": "Webmail 单点登入", "webmailSsoDesc": "Webmail 登录令牌", "mailboxPasswordOptional": "信箱密码（可选）", "mailboxPasswordHint": "可留空", "mailboxPasswordPh": "填写后 token 可自动登入 Roundcube", "ssoTokenHint": "生成短期登录令牌", "issueSsoToken": "签发 SSO token", "sieveTitle": "Sieve 过滤", "sieveDesc": "写入 dataDir/email/sieve；写入 ≠ Dovecot 已载入", "sieveTemplateHint": "默认过滤模板", "writeDefaultSieve": "写入预设 Sieve", "listWrittenFiles": "列出已写入档案", "result": "结果", "domainSslTitle": "此域名 SSL", "domainSslDesc": "跳转 SSL 页并预填域名，申请 Let’s Encrypt", "requestCert": "申请 {{domain}} 凭证", "clientAutoTitle": "用户端自动设定", "clientAutoDesc": "客户端自动配置", "clientAutoHint": "生成 autodiscover／autoconfig", "generateCopyXml": "产生并复制设定 XML", "queueTitle": "邮件伫列", "queueDesc": "查询或清空本机 MTA 伫列（亦可在邮件首页操作；需系统变更权限）", "publicAutoconfig": "公开配置", "bootstrapTitle": "一键设定邮件", "bootstrapDesc": "安装套件并套用邮件堆叠（需系统变更 + 管理员）。必须自订管理员密码。", "adminPassword": "管理员密码", "adminPasswordHint": "管理员邮箱密码", "adminPasswordPh": "至少 8 字元", "adminPasswordRequired": "请设定至少 8 字元的管理员密码", "bootstrapBtn": "一键设定邮件", "webmailInstallDesc": "下载／套用 Roundcube", "webmailHostname": "Webmail 主机名", "webmailHostnameHint": "虚拟主机 server_name，例如 webmail.example.com", "installWebmail": "安装／套用 Webmail", "bootstrapResult": "一键设定／Webmail 结果", "createMailboxTitle": "建立邮箱", "createMailboxDesc": "完整位址会是 {{local}}@{{domain}}", "createMailboxBtn": "建立邮箱", "localPartLabel": "本地部分", "localPartFullHint": "完整位址会是 {{local}}@{{domain}}", "passwordOptionalHint8": "可选；至少 8 位才会写入杂凑", "live": { "noMx": "无 MX", "mxLookupFailed": "MX 查询失败", "noSpf": "无 SPF TXT", "spfLookupFailed": "SPF 查询失败", "noDkim": "无 DKIM TXT", "dkimLookupFailed": "DKIM 查询失败", "noDmarc": "无 DMARC", "dmarcLookupFailed": "DMARC 查询失败", "noPtr": "无 PTR", "ptrLookupFailed": "PTR 查询失败", "port25Open": "外发 TCP 25 似乎畅通（探测 gmail-smtp-in.l.google.com）", "port25Blocked": "外发 TCP 25 探测失败 — 可能被封锁；请申请解封或改用中继", "dnsblListed": "已列入：{{list}}", "dnsblClean": "以下清单干净：{{list}}" }, "deliv": { "mx": "MX 记录", "mxFix": "在 DNS 供应商新增 MX 指向邮件主机", "spf": "SPF 文本", "spfFix": "发布 v=spf1 并包含本机 IP", "dkim": "DKIM TXT", "dkimFix": "发布面板提供的 selector._domainkey TXT", "dmarc": "DMARC 文本", "dmarcFix": "发布 _dmarc 政策（可先 p=none）", "ptr": "反向 DNS（PTR）", "ptrFix": "在 VPS／云控制台设置 PTR 对齐邮件主机名 — 面板无法代设", "port25": "外发 Port 25", "port25Fix": "向主机商申请解封 Port 25，或设置 SMTP 中继（submission 587）", "dnsbl": "DNSBL 声誉", "dnsblFix": "于列出的服务除名；干净前勿大量发信", "relay": "SMTP 中继（Port 25 被封锁时）", "relayOptional": "Port 25 探测畅通 — 中继可选", "relayPresent": "dataDir 已有中继设置（应用仍可能需 EXECUTE）", "relayMissing": "未设置中继 — Port 25 持续封锁时必须设置", "relayFix": "面板邮件 → 中继，或 ysk-server hosting email-bootstrap 加 relay", "warmup": "暖机计划", "warmupDetail": "{{phases}} 阶段 · 第 1 日最多 {{day1}} 封", "warmupFix": "跟随阶段限额；勿用新 IP 对冷名单大量发送", "honesty1": "面板从不保证全球 inbox 送达（Gmail／Outlook 过滤属外部）。", "honesty2": "PTR 与 Port 25 属 VPS／网络供应商 — 非 YSK 控制平面可改。", "honesty3": "MX／SPF／DKIM／DMARC 必须在权威 DNS 供应商发布。", "honestyPortBlocked": "Port 25 似乎被封锁 — 大量发送前请用中继或申请解封。", "honestyPortOk": "Port 25 探测成功 — 仍请监察退信与 DNSBL。" }, "catchall": "Catch-all（全收）", "webmailRoundcube": "网页邮件", "warmup": { "p1g1": "只发交易类／已知可靠收件人", "p1g2": "监控退信；投诉率保持接近零", "p1g3": "放量前确保 SPF／DKIM／DMARC／PTR 已生效", "p2g1": "只向有互动的联系人缓慢扩张", "p2g2": "每日查 DNSBL；被列入即暂停", "p2g3": "若 Port 25 受限，优先用 587 submission 而非 bulk", "p3g1": "指标保持干净再加倍量", "p3g2": "名单分段；硬退信即移除", "p4g1": "无封锁再接近正常量", "p4g2": "持续监控 DMARC rua", "c1": "PTR 对齐 HELO／EHLO（邮件主机名）", "c2": "SPF + DKIM + DMARC 已发布并对齐", "c3": "DNSBL 干净（Spamhaus／SpamCop／Barracuda）", "c4": "外发 Port 25 畅通或已设中继", "c5": "不使用购入的「bulk email」IP 段", "c6": "考虑域名年龄／历史（新域名要更慢爬升）", "noteNewIp": "视此 IP 为新 IP — 从第 1–3 日限额开始", "noteOldIp": "既有 IP 在改设置后仍宜逐步爬升", "noteProcess": "暖机是操作员流程；YSK 提供提示 + DNSBL，不假装营销 ESP 量" }, "health": { "dnsUnconfirmed": "DNS 记录（MX／SPF／DKIM）尚未确认", "dmarcMissing": "缺少 DMARC — 强烈建议设置", "dmarcUnpublished": "DMARC 記錄已在面板產生，但公網尚未解析到", "ptrBad": "PTR 反向 DNS 缺失或不正确 — 请向 VPS 供应商申请", "port25Blocked": "外发 Port 25 似乎被封锁 — 请申请解封或改用 SMTP 中继", "port25Unknown": "Port 25 状态未知 — 请执行连通性检查" }, "stack": { "tlsNote": "SMTP／IMAP 用 Let’s Encrypt TLS 证书", "externalNote": "送达率仍需外部 DNS／PTR／Port25" }, "test": { "defaultSubject": "YSK Server 邮件测试", "needMta": "需要本机 MTA（Postfix）已安装，且 Port 25／中继已设置", "checkSpam": "寄出后请查收件人垃圾箱与服务器邮件日志", "hintDeferred": "若 deferred：查 Port 25 封锁或中继凭证", "hintSpam": "若已接受但仍进垃圾：改善 SPF／DKIM／DMARC／PTR 并暖机", "hintLogs": "检查 /var/log/mail.log 或 journalctl -u postfix" }, "leMailHost": "申请证书 · {{host}}", "leWebmailHost": "申请证书 · {{host}}（网页邮件）", "leApexHost": "申请证书 · {{host}}（主域名）", "applyMailTls": "套用邮件 TLS 路径", "applyMailTlsHint": "须已有 Let’s Encrypt 证书；只写入邮件服务路径并重新加载。", "probeMx": "MX 记录", "probeSpf": "SPF", "probeDkim": "DKIM", "probeDmarc": "DMARC", "probePtr": "PTR", "probeDnsbl": "DNSBL", "dnsAuthRepairTitle": "DNS 验证待修", "dnsAuthRepairHint": "到 DNS tab 复制记录并发布。", "fixHintSpf": "SPF 未通过：请发布 v=spf1 的 TXT（@）。", "fixHintDkim": "DKIM 未通过：请发布选择器._domainkey 的 TXT。", "fixHintDmarc": "DMARC 未通过：请发布 _dmarc 的 TXT。", "fixHintMx": "MX 未通过：请将邮件主机 MX 指到 mail.域名。", "mailTls": { "needRootExecute": "套用邮件 TLS 需要管理员权限与系统变更权限。", "certMissing": "未找到 {{host}} 证书文件（{{path}}）。", "getCertFirst": "请先在 SSL 页为 {{host}} 申请 Let’s Encrypt 证书。", "certFound": "已找到 {{host}} 证书。", "postconfFailed": "postconf 失败：{{detail}}", "postfixPathsSet": "已设置 Postfix TLS 证书路径。", "postfixReloaded": "已重新加载 Postfix。", "postfixReloadFailed": "Postfix 重新加载失败：{{detail}}", "dovecotApplied": "已写入 Dovecot TLS 片段并尝试重新加载。", "dovecotSkipped": "已跳过 Dovecot（未安装或 doveconf 不可用）。", "dovecotSslOmitted": "邮件证书不存在，已改写 Dovecot 为 ssl=no，避免单元因缺少证书而无法启动。" }, "policyApplySystemHint": "勾选「套用到系统」才会写入 Postfix／Rspamd 映射并重新加载；否则只写控制面草稿。", "rateLimitAppliedNote": "已套用每小时外发限额与反垃圾标记（若启用系统套用）。", "bootstrapHonesty": "一键设置写入管理文件；应用到系统需权限。DNS／PTR／端口 25 须自行完成。", "bootstrapAfterSteps": "完成后建议：① 发布 DNS（MX/SPF/DKIM/DMARC）② 申请 mail.域名 SSL ③ 按「套用邮件 TLS 路径」。", "bootstrapThenSsl": "下一步：申请 mail SSL", "bootstrap": { "mtaOk": "已写入 MTA 配置（{{count}} 个文件）", "mtaIncomplete": "MTA 配置未完成：{{detail}}", "seeNotes": "见 notes", "mailboxOk": "邮箱 {{address}}（状态 {{status}}）", "mailboxExists": "邮箱已存在（跳过）：{{detail}}", "passdbOk": "Dovecot passdb 已写入（{{count}} 个邮箱）", "webmailOk": "网页邮件方案 {{mode}}（{{host}}）", "mailTlsTodo": "邮件 TLS：请为 {{mailHost}} 申请证书后，在健康分页按「套用邮件 TLS 路径」。", "externalDns": "外部待办（你负责）：在 DNS 商设置 MX/SPF/DKIM/DMARC；VPS 设 PTR；开放端口 25 或改用 SMTP 中继。", "healthScore": "健康分数 {{score}}/{{max}}（DNS/PTR/端口 25 不会自动完成）", "webmailProjectOk": "网页邮件项目 {{tool}} @ {{host}}（{{status}}）", "dovecotApplyOk": "已套用 Dovecot 虚拟认证" }, "tabDeliverability": "送达", "pendingCount": "待处理", "externalTodosOneLiner": "PTR、端口 25、注册商 DNS 须自行完成。", "runDeliverabilityPack": "执行送达检查", "deliverabilityTitle": "送达检查", "deliverabilityEmpty": "尚未检查", "deliverabilityEmptyDesc": "按「执行送达检查」探测 DNS、PTR、端口 25。", "panelReady": "面板可验", "gaps": "有缺口", "checkOk": "通过", "checkExternal": "外部", "checkFail": "失败", "mailboxListDesc": "建立后可写入 Dovecot 密码库（需系统变更权限）", "aliasesDesc": "把地址转到其他信箱", "relayDesc": "经外部 SMTP 寄信；套用到系统才会写 Postfix（需系统变更权限）", "deliverabilityDesc": "PTR／DNS／端口 25 检查", "dnsTodosDesc": "建议纪录可复制到外部 DNS 或到 DNS 页建 zone（写入 ≠ 权威上线）", "deliverabilityHonesty": "无法代设 PTR 或解除端口 25 封锁", "warmupSuggest": "预热建议", "writeSsoSkeleton": "写入 Roundcube SSO 骨架", "rateLimitPerHour": "每小时讯息上限", "rateLimitGlobalHint": "全域取各域名最小值", "savePolicyWritten": "只写入控制面", "dnsblMultiIp": "多 IP RBL", "webmailTool": "网页邮件软件", "webmailToolRoundcube": "Roundcube（默认）", "webmailToolSnappy": "SnappyMail（轻量）", "webmailProjectName": "项目名称", "installWebmailProject": "创建并上线网页邮件", "openWebmail": "打开网页邮件", "webmailRisk": "公开网页邮件有风险 — 请尽快上 HTTPS。", "webmailForceHttps": "强制 HTTPS（Roundcube；需已绑 SSL）", "reinstallWebmail": "重新安装／升级", "installWebmailTitle": "创建共享网络邮件项目（首次安装）", "reinstallWebmailTitle": "重建/升级现有的Webmail项目", "reinstallNeedInstall": "首先安装网络邮件", "webmailSsoAdvanced": "高级 · SSO 插件", "tlsRoleMail": "mail（IMAP／SMTP）", "tlsRoleMailHint": "邮件服务器主机名", "tlsRoleWebmail": "webmail（网页邮件）", "tlsRoleWebmailHint": "网页邮件虚拟主机", "tlsRoleApex": "主域名", "tlsRoleApexHint": "网页／apex 证书", "tlsRequestLe": "申请 LE", "tlsRequestLeFor": "为 {{host}} 申请 LE", "advancedToolsTitle": "队列与客户端", "flushQueueConfirm": "确定清空本机 MTA 队列？此操作不可复原。", "mailSslTitleShort": "证书与 TLS", "deleteDomain": "删除域名", "deleteDomainConfirmTitle": "删除邮件域名？", "deleteDomainConfirm": "将删除 {{domain}} 及其邮箱、别名与控制面数据。系统 Postfix／Dovecot 配置可能需另行清理。", "deleteDomainBtn": "删除", "deleteMailbox": "删除邮箱", "deleteMailboxTitle": "删除邮箱？", "deleteMailboxDesc": "将删除 {{address}} 及其控制面数据与本机 Maildir（若存在）。", "deleteMailboxC1": "邮箱登录与邮件文件", "deleteMailboxC2": "重写该域 virtual map（控制面）", "deleteMailboxC3": "系统 Dovecot／Postfix 可能仍需另行清理", "deleteAliasTitle": "删除别名／转发？", "deleteAliasDesc": "将删除 {{source}}。", "deleteImpact": "{{mailboxes}} 个信箱 · {{records}} 笔 DNS 纪录 · {{aliases}} 个别名", "deleteDomainC1": "所有邮箱与别名", "deleteDomainC2": "控制面 DKIM、DNS 建议与旗标", "deleteDomainC3": "本机 dataDir/email 目录（若存在）", "deleteDomainC4": "系统 MTA 映射可能仍在，需另行清理", "deleteDialogTitle": "永久删除邮件域名", "deleteDialogDesc": "即将删除 {{domain}}，无法还原。", "deletePermanent": "永久删除", "deleteRemoveData": "一并删除本机邮件数据", "deleteRemoveDataDesc": "取消则只移出面板，磁盘上的 Maildir 会保留", "deleteTypeName": "输入域名以确认", "deleteTypeNameHint": "必须完全一致：{{name}}", "deleteWillData": "本机 dataDir/email 目录（若存在）", "deleteKeepData": "保留本机 dataDir 邮件数据", "deleteSystemWarn": "系统 Postfix／Dovecot 映射不会自动清理；必要时请另行处理。", "hostIpPick": "本机 IPv4", "hostIpPickV6": "本机 IPv6", "editMailboxTitle": "修改邮箱", "editMailboxDesc": "更改 {{address}} 的密码或其他登录设置", "editMailboxSave": "保存更改", "newPassword": "新密码", "newPasswordHint": "留空则保持现有密码；若填写至少 8 个字符", "confirmPassword": "确认密码", "mailboxStatus": "状态", "mailboxStatusActive": "启用（允许登录）", "mailboxStatusDisabled": "停用（禁止登录）", "mailboxStatusHint": "停用时会写入 Dovecot 密码库 *，拒绝登录", "colAddress": "地址", "colLocalPart": "本地部分", "colPassword": "密码", "colCreated": "创建时间", "hasPassword": "已设置", "noPassword": "未设置", "mailboxPager": "邮箱分页", "prevPage": "上一页", "nextPage": "下一页", "pageOf": "第 {{page}} / {{total}} 页 · {{count}}", "mailboxEmptyTitle": "尚无邮箱", "passwordMismatch": "两次密码不一致", "passwordTooShort": "密码至少 8 个字符", "mailboxUpdateNeedField": "请设置新密码或更改状态", "catchallHint": "未对应的本地部分会送到目标信箱。只写草稿，须套用邮件才生效。", "queueSearchPh": "搜索 ID、发件人或收件人…", "queueId": "队列 ID", "queueSender": "发件人", "queueRecipients": "收件人", "queueSize": "大小", "queueReason": "原因", "queueActive": "传送中", "queueHeld": "已暂停", "queueDeferred": "延迟", "deleteQueueTitle": "删除此队列邮件？", "deleteQueueDesc": "从本机 MTA 队列移除 {{id}}。需要 YSK_EXECUTE。", "openQueuePage": "打开邮件队列", "dovecotFailedHint": "Dovecot 服务失败。请先到软件分页查看状态；若邮件证书尚未签发，请先到 SSL 签发 mail 主机名。", "dovecotFailedStatus": "鸽舍是{{status}}。打开设备摘要的“软件”选项卡。", "mailCertMissing": "{{hosts}} 没有证书。在 SSL 页面上发布。", "mailCertPresent": "邮件证书已颁发 - 这不是缺少证书的问题。", "webmailNeedCert": "{{host}} 没有证书 — 在强制使用 HTTPS 之前在 SSL 上颁发证书。", "domainRequired": "请填写域名", "domainInvalid": "请输入有效域名", "serverIpRequired": "请填写服务器 IP", "serverIpInvalid": "请输入有效 IP 位址", "serverIpv6Invalid": "请输入有效 IPv6 位址", "localPartRequired": "请填写本机部分", "localPartInvalid": "本机部分只可用英文字母、数字与 . _ + -", "aliasDestRequired": "请填写至少一个目标信箱", "mailboxStatusManaged": "受管", "mailboxStatusActiveShort": "启用", "mailboxStatusDisabledShort": "停用", "mailboxStatusSystem": "系统已布建", "mailboxStatusPending": "待系统布建", "mailboxStatusFailed": "系统布建失败", "dnsblCleanStatus": "未列入", "dnsblListedStatus": "已列入", "deliverabilityDone": "送达检查完成（{{score}}/100）", "sieveEmpty": "尚未写入 Sieve 档案", "sieveListed": "已列出 {{count}} 个档案", "webmailHostnameRequired": "请填写网页电邮主机名", "sieveFilesTitle": "已写入档案" }, "errors": { "YSK_UNAUTHORIZED": "未授权", "YSK_FORBIDDEN": "禁止访问", "YSK_NOT_FOUND": "找不到资源", "YSK_VALIDATION": "输入无效", "YSK_ALLOWLIST_DENIED": "不在允许清单", "YSK_APPROVAL_REQUIRED": "需要审批", "YSK_APPROVAL_PENDING": "审批处理中", "YSK_APPROVAL_REJECTED": "审批已拒绝", "YSK_SANDBOX_VIOLATION": "沙箱限制", "YSK_LLM_UNTRUSTED": "不可信 LLM 输出", "YSK_CONFIG_INVALID": "配置无效", "YSK_SETUP_INCOMPLETE": "安装未完成", "YSK_UPDATE_FAILED": "更新失败", "YSK_INTERNAL": "内部错误", "YSK_NEED_EXECUTE": "需要系统变更权限", "YSK_NEED_ROOT": "需要系统管理员权限", "YSK_RATE_LIMITED": "尝试过多，请稍后再试", "YSK_TOTP_REQUIRED": "需要双重验证码", "auth": { "needCredentials": "请输入用户名与密码", "rateLimited": "登录尝试过多，请稍后再试", "badCredentials": "账号或密码不正确", "accountSuspended": "账户已暂停", "adminTotpStrict": "管理员必须先启用 2FA（strict）。请用已启用 2FA 的账号，或关闭 strict 设置。", "totpReplay": "验证码已使用，请等下一个周期", "totpRequired": "需要有效的双重验证码", "mustEnrollTotp": "管理员政策：请立即启用双重验证", "userNotFound": "找不到用户", "totpSetupNeedReauth": "设置 2FA 需要重新输入密码（或近期 step-up 验证码）", "totpBeginFirst": "请先开始设置 2FA", "totpInvalid": "验证码无效", "stepUpRequired": "此操作需要重新输入双重验证码", "missingCredential": "缺少登录凭证", "apiKeyUserMissing": "API 密钥对应用户不存在", "apiKeyInvalid": "API 密钥无效", "sessionExpired": "登录已失效，请重新登录", "sessionIdle": "闲置超时，请重新登录", "totpNotEnabled": "未启用 2FA", "totpSecretNoDataDir": "TOTP secret 已加密但未设置 dataDir", "mustChangePassword": "请先设定新密码才可继续", "policyNeedsOwn2fa": "为此账户启用 2FA 并使用 TOTP 代码进行确认，然后再要求其他账户使用 2FA" }, "http": { "notFoundRoute": "找不到：{{method}} {{path}}", "unauthorized": "未登录或会话已过期", "forbidden": "没有权限执行此操作", "notFound": "找不到资源", "unprocessable": "操作无法完成（服务器拒绝）", "requestFailed": "请求失败（{{status}}）", "jsonInvalid": "JSON 无效", "internal": "内部错误", "payloadTooLarge": "请求内容过大" }, "YSK_HOST_BROWSE_SSRF": "主機瀏覽已被安全政策攔截", "YSK_HOST_BROWSE_SESSION": "主機瀏覽工作階段不存在或已過期", "YSK_HOST_BROWSE_UPSTREAM": "主機瀏覽上游擷取失敗", "YSK_HOST_BROWSE_NEED_CHROME": "真實瀏覽器引擎需要主機上的 Chrome／Chromium" }, "fail2ban": { "backToProtection": "防护中心", "statCurrentBan": "当前 ban", "statTotal": "累计", "statBanList": "封锁列表", "statBoot": "开机", "startedOk": "已启动 fail2ban", "startService": "启动服务", "notInstalled": "fail2ban 尚未安装", "toolHintPrefix": "底层工具：", "toolHintBody": "fail2ban 会扫描日志后临时封锁。攻击应变请用", "toolHintTemp": "", "toolHintBody2": "", "toolHintUfw": "负责端口与永久规则。", "tabs": { "bans": "封锁列表", "whitelist": "白名单", "jails": "Jail", "policy": "策略", "service": "服务", "about": "说明" }, "manualBanTitle": "手动 ban（临时）", "ipPlaceholder": "IPv4 或 IPv6", "banipOk": "已 banip", "manualBanHint": "临时封锁，过 bantime 会自动解；永久拒请用 UFW。白名单见「白名单」分页。", "currentBans": "当前封锁", "bannedTableTitle": "Banned IPs（真实 fail2ban-client）", "bannedTableDesc": "需能读取 client；unban 需 YSK_EXECUTE", "unbanOk": "已 unban", "unban": "解封", "addWhitelistTitle": "加入 ignoreip 白名单", "whitelistAdded": "已加入白名单", "addWhitelistShort": "+白名单", "emptyBansTitle": "无封锁中 IP", "emptyBansDesc": "或无权读取 fail2ban-client", "ignoreipTitle": "ignoreip 白名单", "ignoreipDesc": "永不会被 ban 的 IP（管理文件 + 可选 live fail2ban-client）。建议加入你的办公／居家 IP。", "whitelistEmptyWarn": "白名单为空，jail 可能把你自己封锁。套用 ignoreip 前请先加入登录 IP。", "suggestIgnoreLogin": "你的登录 IP {{ip}}", "applyIgnoreEmptyWarn": "白名单为空时套用会清空 ignoreip", "applyIgnoreNeedConfirm": "会重写 jail ignoreip 并重新载入 fail2ban", "addIp": "新增 IP", "addWhitelist": "加入白名单", "applyPolicyIgnoreip": "套用策略（含 ignoreip）", "applyIgnoreipOk": "已把 ignoreip 写入 jail.local 并套用", "ignoreipHint": "没有系统变更权限时只写面板档。套用策略会重建 jail.local 的 ignoreip 并重新载入。", "whitelistTitle": "白名单 ({{count}})", "whitelistRemoved": "已移除白名单", "remove": "移除", "emptyWhitelistTitle": "尚未有白名单 IP", "emptyWhitelistDesc": "加入管理 IP，避免自己被 ban", "activeJails": "作用中 Jail", "colCurrent": "当前", "colTotal": "累计", "colDesc": "说明", "emptyJailsTitle": "无 jail", "emptyJailsDesc": "服务未启动或尚未套用 jail.local", "policyTitle": "Jail 策略", "policyDesc": "写入管理 jail.local；套用时 copy + reload（不经 UFW）", "bantimeHint": "封锁时长", "findtimeHint": "统计窗口", "maxretryHint": "窗口内最多失败次数", "customExample2h": "自定义，例 2h", "customExample15m": "自定义，例 15m", "customMaxretry": "自定义 1–50", "min": "{{n}} 分", "hour": "{{n}} 时", "week": "{{n}} 周", "enableJailsHint": "启用 jail（勾选后套用）：", "writtenOnlyMsg": "已写管理文件（未套用系统）", "writeOnly": "只写管理文件", "appliedOk": "已套用 fail2ban", "applyToSystem": "套用到系统", "systemdTitle": "systemd 控制", "enableAndStart": "启用并启动", "serviceHint": "攻击应变请用", "serviceHintSuffix": "（会调用本页 jail + Nginx 限速，不重复建第二套 UFW）。", "actionOk": { "enable": "已启用并启动 fail2ban", "start": "已启动 fail2ban", "reload": "已重新加载 fail2ban", "restart": "已重启 fail2ban", "stop": "已停止 fail2ban" }, "statWhitelist": "白名单", "invalidIp": "请输入有效的 IPv4、IPv6 或 CIDR。", "whitelistPendingApply": "已写入面板名单。请按「套用策略」才会写入 jail.local。", "ignoreipFile": "dataDir/fail2ban/ignoreip.txt", "jailsTabHint": "显示作用中 Jail 状态。要开关 Jail 请到「策略」分页。", "colJail": "监狱", "colEnabled": "开启", "serviceStateLine": "单元 {{unit}} · {{state}} · 开机 {{boot}}", "jail": { "sshd": "远程登录暴力破解", "nginxHttpAuth": "Nginx HTTP 验证", "nginxBotsearch": "Nginx 扫描／机器人探测", "nginxBadbots": "Nginx 已知恶意机器人", "nginxLimitReq": "Nginx 限速 Jail", "postfix": "Postfix 邮件暴力破解", "dovecot": "Dovecot 邮件登录", "recidive": "累犯" }, "cannotBanSelf": "这是主机或您的登录 IP — 将其添加到ignoreip而不是禁止", "suggestIgnoreHint": "建议的管理 IP（仅在您应用策略之前为面板文件）：", "suggestIgnoreAdd": "添加 {{ip}}" }, "featurePage": { "back": "返回" }, "files": { "pillFiles": "{{count}} 文件", "pillTrash": "回收桶 {{count}} 项", "pillSpace": "已用 {{used}}", "statFiles": "文件", "statFolders": "文件夹", "statUsage": "用量", "statSelected": "已选", "statTrash": "回收站", "statShares": "分享", "publicSiteSettings": "公用站设置", "opsResultTitle": "文件操作结果", "closeResult": "关闭结果", "tabBrowse": "浏览", "tabTrash": "回收站", "tabShares": "分享", "spaceLabel": "空间", "publicFiles": "公用文件", "viewLabel": "视图", "allFiles": "全部文件", "favorites": "收藏", "upload": "上传", "newFolder": "新建文件夹", "newTextFile": "新建文本文件", "download": "下载", "copy": "复制", "move": "移动", "zip": "压缩 zip", "unzip": "解压", "unzipDone": "已解压 {{path}}", "unzipFailed": "unzip 失败", "delete": "删除", "searchName": "搜索…", "sortAria": "排序", "sortNameAsc": "名↑", "sortNameDesc": "名↓", "sortSizeAsc": "小↑", "sortSizeDesc": "大↓", "sortMtimeDesc": "最新", "sortMtimeAsc": "最旧", "viewList": "列表", "viewIcons": "图标", "viewAria": "视图模式", "toolbarAria": "文件操作", "pathAria": "路径", "rootPublic": "公用", "rootProject": "项目", "emptyFavorites": "尚未有收藏", "emptyFolder": "此文件夹是空的", "emptyFolderHint": "拖放文件或整个文件夹到此处上传，或按「上传」", "selectItem": "选择 {{name}}", "colName": "名称", "colSize": "大小", "colMtime": "修改", "rename": "重命名", "unfavorite": "取消收藏", "favorite": "收藏", "share": "分享", "versions": "版本", "selectAllAria": "全选", "selectAll": "全选", "folder": "文件夹", "dirNamedLikeFile": "（文件夹残留；名称像文件）", "dropToUpload": "放开以上传", "trashTitle": "回收站 ({{count}})", "trashDesc": "删除的文件可还原或永久清除", "emptyTrash": "清空回收站", "emptyTrashTitle": "清空垃圾箱？", "emptyTrashDesc": "垃圾箱中的每个文件都将被永久删除。此操作无法撤消。", "purgeForeverDesc": "该文件将被永久删除。此操作无法撤消。", "emptyTrashDone": "已清空回收站", "colOrigPath": "原路径", "colDeletedAt": "删除时间", "restore": "还原", "restored": "已还原", "purgeForever": "永久删除", "purged": "已永久删除", "trashEmpty": "回收站是空的", "sharesTitle": "公开分享链接 ({{count}})", "colPath": "路径", "colLink": "链接", "colDownloads": "下载次数", "unshare": "取消", "unshareDone": "已取消分享", "sharesEmpty": "尚未创建分享", "sharesEmptyHint": "在文件行按「分享」", "webdavTitle": "WebDAV 设置", "webdavDesc": "用 Basic 认证把公用文件根挂到 Finder／Windows／rclone；令牌只显示一次。", "enableIssueToken": "启用并签发令牌", "webdavReissueToken": "重新签发令牌", "webdavReissueConfirm": "重新签发会立即作废旧密码，已挂载的客户端会断线。确定？", "webdavDisableConfirm": "停用后 /webdav 将拒绝所有连接。确定？", "tokenIssued": "已签发令牌", "status": "状态", "enabledMount": "已启用 · {{path}}", "notEnabled": "未启用", "disable": "停用", "webdavAlreadyOff": "WebDAV 已关闭", "webdavDisabled": "已停用 WebDAV", "webdavEnabledNoEcho": "已启用（密码不会再次显示；需要时请重新签发）", "webdavDefaultOff": "默认关闭 — 点「启用并签发令牌」开始", "webdavAfterEnable": "启用 WebDAV 并签发令牌后才可用。", "webdavOn": "已启用", "webdavOff": "已关闭", "webdavOffNoToken": "已停用（无有效权杖）", "webdavTokenId": "令牌 #{{id}}", "webdavTokenInactive": "已停用，权杖 #{{id}} 不生效", "webdavUpdated": "更新于 {{at}}", "webdavTokenOnceTitle": "请立即复制密码", "webdavTokenOnceHint": "此密码只显示一次；关闭本页后无法再查看。", "webdavConnTitle": "连接信息", "webdavConnDesc": "客户端用以下 URL 与 Basic 账密连入", "webdavUrl": "服务器 URL", "webdavUsername": "用户名", "webdavPassword": "密码（令牌）", "webdavPasswordHidden": "已签发但不再显示 — 请重新签发或使用已保存的密码", "webdavPasswordNone": "尚未签发", "webdavRoot": "挂载根目录", "webdavRootValue": "面板公用文件根（public files）", "webdavAuth": "认证方式", "webdavAuthValue": "HTTP Basic · 用户 ysk · 密码 = 面板签发的令牌", "webdavConnBundle": "连接资料", "webdavCopyAll": "复制全部连接资料", "webdavClientsTitle": "客户端设置", "webdavClientsDesc": "常见挂载方式（建议 HTTPS；自签证书需在客户端信任）", "webdavClientFinder": "macOS 查找器", "webdavClientFinderHint": "前往 → 连接服务器…（⌘K），粘贴 URL，用户 ysk，密码为令牌。", "webdavClientWin": "视窗", "webdavClientWinHint": "此电脑 → 映射网络驱动器 → 选择「使用其他凭据」；或用 Cyberduck / WinSCP（WebDAV）。", "webdavNotesTitle": "注意事项", "webdavNote1": "WebDAV 对应公用文件根，不是整个主机文件系统。", "webdavNote2": "需要 reverse proxy／防火墙放行面板端口，并建议仅用 HTTPS。", "webdavNote3": "重新签发令牌会立即作废旧密码；停用会拒绝所有 /webdav 请求。", "webdavNote4": "支持 OPTIONS／PROPFIND／GET／PUT；高级 LOCK 等未必齐全。", "copiedLabel": "已复制「{{label}}」", "newFolderTitle": "新建文件夹", "willCreateAt": "将创建于「{{path}}」", "nameRequired": "请输入名称", "folderCreated": "已创建文件夹", "create": "创建", "folderName": "文件夹名称", "noPathSepHint": "不可含路径分隔符", "newTextTitle": "新建文本文件", "fileNameRequired": "请输入文件名", "textFileCreated": "已创建文本文件", "fileName": "文件名", "fileNameHint": "例如 readme.md 或 notes.txt", "versionsTitle": "版本历程", "versionsDesc": "", "noVersions": "尚无历史版本", "noVersionsHint": "", "versionRestored": "已还原", "restoreVersionConfirm": "用 {{version}} 覆写现档 {{file}}？磁盘上的现档会被盖掉。", "renameTitle": "重命名", "renameCurrent": "当前：{{name}}", "renamed": "已重命名", "newName": "新名称", "newNameHint": "仅改文件名，不变更所在目录", "copyTo": "复制到…", "moveTo": "移动到…", "copyMoveDesc": "{{action}} {{count}} 个项目", "actionCopy": "复制", "actionMove": "移动", "copied": "已复制", "moved": "已移动", "targetFolderPath": "目标文件夹路径", "targetFolderHint": "相对 root，例如 docs 或 docs/a；留空 = 根目录", "shareCreateTitle": "分享文件", "shareCreateDesc": "创建公开下载链接；密码可选。", "createLink": "创建链接", "sharePath": "路径：", "passwordOptional": "密码（可选）", "passwordOptionalHint": "留空则任何人持有链接即可下载", "passwordPlaceholder": "可选", "linkCreated": "链接已创建：", "chmodTitle": "修改权限（chmod）", "chmodDone": "已 chmod {{mode}} → {{count}} 个项目", "chmodDoneShort": "已 chmod {{mode}}", "chmodFailed": "chmod 失败", "apply": "套用", "chmodApplyHint": "将套用到已选 {{count}} 个项目（八进制，如 644 / 755）", "chmod644": "644 文件", "chmod755": "755 可执行", "chmod600": "600 私密", "chmod700": "700 目录私密", "chmod775": "775 组写", "chmodCustomPh": "自定义 0644…", "mode": "模式", "zipTitle": "压缩为 zip", "zipCreated": "已创建 {{path}}", "zipDone": "已压缩 → {{path}}", "zipFailed": "zip 失败", "compress": "压缩", "zipHint": "将压缩已选 {{count}} 个项目到当前文件夹（需系统有 zip 命令）", "destFileName": "目标文件名", "destPathHint": "路径：{{path}}", "movedToTrash": "已移至回收站", "moveToTrashTitle": "移至回收站？", "moveToTrashDesc": "将删除 {{count}} 个项目（可于回收站还原）", "deleteMore": "，以及另外 {{n}} 项", "unshareTitle": "撤销此分享？", "unshareDesc": "撤销 {{name}} 的连结（{{url}}）。连结会立即失效。", "preview": "预览", "imagePreviewNeedLogin": "图片预览需要已登录；请改用下载", "pdfDownloadHint": "PDF 请按下载打开（需授权头）", "noEmbedPreview": "此类型无法内嵌预览，请下载。", "uploadDone": "已上传 {{count}} 个文件", "downloadFailedStatus": "下载失败 ({{status}})", "downloadFailed": "下载失败", "uploadFolder": "上传文件夹", "dropFolderOrFile": "放开以上传文件或整个文件夹", "uploadPanelTitle": "上传进度", "uploadPanelStats": "{{done}}／{{total}} 完成 · 失败 {{err}}", "uploadClearDone": "清除已完成", "uploadInFolder": "文件夹 {{folder}}", "uploadStatusDone": "完成", "uploadStatusError": "失败", "uploadStatusQueued": "排队", "uploadNoFile": "无文件内容", "uploadSomeFailed": "{{count}} 个项目上传失败", "uploadTruncated": "一次最多上传 {{max}} 项（共选了 {{total}} 项，其余已跳过）", "previewFailed": "预览失败", "videoNotSupported": "浏览器无法播放此视频。", "audioNotSupported": "浏览器无法播放此音频。", "edit": "编辑", "editorTitle": "编辑 · {{name}}", "editorSave": "保存", "editorSavedIdle": "已保存", "editorSaved": "已保存 {{name}}", "editorSaveFailed": "保存失败", "editorDirty": "未保存", "editorClean": "已保存", "editorChars": "{{count}} 字符", "editorAria": "编辑 {{name}}", "editorDiscardConfirm": "放弃未保存的更改？", "shareReadyTitle": "链接已就绪", "shareReadyDesc": "复制后发送。持有链接者即可下载。", "shareReadyBadge": "已创建", "shareProtected": "已设密码", "shareOpenAccess": "无密码", "shareLinkLabel": "公开链接", "shareCopyHint": "可点选字段或点「复制」。", "shareAgain": "再建一个", "shareCreatedToast": "分享链接已创建", "linkCopied": "已复制链接", "linkCopyFailed": "无法自动复制，请手动选择复制", "shareExpireLabel": "链接有效期", "shareExpireHint": "到期后链接失效", "shareExpireNever": "永不过期", "shareExpire1h": "1 小时", "shareExpire1d": "1 天", "shareExpire7d": "7 天", "shareExpire30d": "30 天", "shareExpireCustom": "自定义…", "shareExpireAt": "到期时间", "shareExpireInvalid": "请选择未来的日期时间", "shareExpiresAt": "到期 {{at}}", "colExpires": "到期", "pdfInlineHint": "若浏览器无法内嵌显示 PDF，请下载查看。", "publicShareTitle": "有人与你分享文件", "publicShareSub": "通过安全链接下载，无需登录", "publicShareChecking": "检查链接…", "publicShareDownloading": "下载中…", "publicShareWait": "请稍候", "publicShareNeedPassword": "此链接需要密码才能下载", "publicSharePasswordPh": "分享密码", "publicShareDownload": "下载", "publicShareDownloadAgain": "再次下载", "publicShareDone": "下载已开始", "publicShareDoneHint": "请查看浏览器下载栏；若未出现可再点一次", "publicShareNotFound": "分享不存在或已过期", "publicShareDenied": "无法访问此分享", "publicShareBadPassword": "密码错误", "publicShareMissing": "链接无效", "publicShareFailed": "下载失败（{{status}}）", "publicShareFailedGeneric": "下载失败", "publicShareDefaultName": "下载", "publicSharePanelLogin": "登录控制面", "publicShareLang": "语言", "publicShareProgress": "{{loaded}} / {{total}}（{{pct}}%）", "publicShareProgressIndeterminate": "已接收 {{loaded}}…", "publicShareCancel": "取消", "publicShareCancelled": "已取消下载", "publicSharePoweredBy": "由 {{company}} 提供", "publicSharePoweredPrefix": "由 ", "publicSharePoweredSuffix": " 提供", "publicShareHasAccount": "已有账号？登录", "password": "密码", "editorLines": "{{count}} 行", "editorLargeHint": "文件较大，编辑可能较慢。超过约 2 MB 请改用下载（服务器上限）。", "editorLnCol": "行 {{line}}，列 {{col}}", "editorSpaces": "空格：{{n}}", "copyLink": "复制链接", "versionsTitleShort": "版本历程", "versionsCount": "{{count}} / {{max}} 版", "versionN": "第 {{n}} 版", "versionLatest": "最新", "shareModeLabel": "下载方式", "shareModeDirect": "直接下载", "shareModeBt": "BitTorrent（WebTorrent）", "shareModeBoth": "直接下载 + BitTorrent", "shareModeHint": "BT 需要运行中的 Tracker（文件 → BT Tracker）。持有 magnet 链接者即可下载，请慎用密码与有效期。", "shareModeBtBlocked": "Tracker 未运行 — 请先启动，或改选仅直接下载。", "shareMagnet": "Magnet 链接", "shareTorrentFile": "下载 .torrent", "shareSeedStatus": "做种状态", "shareBtStats": "BitTorrent 状态", "btSeeds": "种子", "btLeechers": "下载者", "btPeers": "同行", "btUploadSpeed": "上传速度", "btDownloadSpeed": "下载速度", "btUploaded": "已上传", "btDownloaded": "已下载", "btRatio": "分享率", "btUpdatedAt": "更新时间", "btServerStats": "服务器做种", "btClientStats": "你的客户端", "btSeeding": "做种中", "btPending": "做种准备中", "btStopped": "已停止做种", "btError": "做种错误", "publicShareMethod": "请选择下载方式", "publicShareDirect": "直接下载", "publicShareBt": "BT", "openBtTracker": "打开 BT Tracker", "publicShareBtInBrowser": "在浏览器以 WebTorrent 下载", "publicShareBtProgress": "已下载 {{pct}}% · {{peers}} 个 peers · ↓ {{down}} · ↑ {{up}}", "publicShareBtStarting": "正在连接 peers…", "publicShareBtFailed": "WebTorrent 失败：{{detail}}", "publicShareBtNeedMagnet": "此分享没有 magnet 链接", "publicShareBtUnsupported": "此浏览器无法运行 WebTorrent；请改用 magnet 或 .torrent", "btNone": "—", "uploadStatusSkipped": "已跳过", "uploadStatusCancelled": "已取消", "conflict": { "titleFile": "已有名为“{{name}}”的项目", "titleFolder": "已有名为“{{name}}”的文件夹", "descFile": "请选择处理方式。在选择“替换”之前不会覆盖现有文件。", "descFolder": "请选择处理方式。“合并”会保留现有文件夹，再处理其中的文件。", "incoming": "即将加入", "existing": "已在此处", "kindFile": "文件", "kindFolder": "文件夹", "skip": "跳过", "skipHint": "不加入此项目", "keepBoth": "保留两者", "keepBothHint": "将新项目存为 {{name}}", "replace": "替换", "replaceHint": "覆盖现有文件。可能时会保留版本快照。", "replaceFolderHint": "覆盖文件夹中的同名文件，其余文件会保留。", "merge": "合并", "mergeHint": "保留现有文件夹，并将新文件加入其中", "applyAll": "应用到其余所有重名", "applyAllHint": "本次拖放或复制／移动的其余项目都使用同一做法", "cancelRest": "取消其余项目", "progress": "第 {{current}}／{{total}} 项", "typeMismatch": "此处已有名为“{{name}}”的{{destKind}}，即将加入的是{{incomingKind}}。", "skipped": "已跳过", "cancelled": "已取消" }, "webdavReissueUnchanged": "重新签发后令牌编号未变——写入可能未生效，请再试一次。", "webdavDisableFailed": "停用后状态仍为启用——写入可能未生效，请再试一次。" }, "firewall": { "profiles": { "web": { "label": "Web 主机", "short": "SSH · 80 · 443" }, "mail": { "label": "Web + 邮件", "short": "另开 25/465/587/993" }, "ftps": { "label": "网络+FTPS", "short": "21 + PASV 30000–30100" } }, "appliedProfile": "已套用配置档：{{label}}", "backToProtection": "防护中心", "statRules": "规则", "statDenyIps": "永久拒 IP", "statAllow": "允许", "statDeny": "拒绝", "statDefaultIn": "入站默认", "defaultNotApplied": "不适用（UFW 关闭）", "ufwOffHint": "UFW 关闭时不应用默认传入", "executeOn": "开", "executeOff": "关", "ufwDisabled": "已停用 UFW", "ufwEnabled": "已启用 UFW", "disableUfw": "停用 UFW", "enableUfw": "启用 UFW", "notInstalled": "UFW 尚未安装", "toolHintPrefix": "底层工具：", "toolHintBody": "UFW = 端口／永久规则 · 攻击应变与自动 ban 请用", "toolHintfail2ban": "fail2ban = 日志临时 ban", "toolHintFail2ban": "fail2ban = 基于日志的临时禁令", "executeOffHint": "系统变更未开 — 可看状态，改规则需 root + YSK_EXECUTE=1", "tabs": { "rules": "规则表", "ports": "开端口", "deny": "永久拒 IP", "profiles": "配置档", "about": "说明", "services": "服务" }, "currentRules": "当前规则", "rulesSourceHint": "UFW 编号规则（ufw status numbered）", "colAction": "动作", "colTo": "目标", "colFrom": "来源", "deleteShort": "删除", "denyBadge": "拒绝", "emptyRulesTitle": "无规则或无权读取", "emptyRulesInstalled": "UFW inactive 或需 root 读取", "emptyRulesNotInstalled": "安装 UFW 后再刷新", "allowPortTitle": "允许端口", "protocol": "协议", "protoBoth": "两者", "protoBothLabel": "TCP+UDP", "port": "端口", "portHint": "选常用端口，或下面自定义", "portHintYsk": "YSK 服务端口一览（Panel／Web／SSH／邮件／FTP／DNS／DB／Redis）；可自定义", "privatePortWarn": "{{service}} 默认宜只听内网；公开 allow 有风险。建议填写来源 IP／CIDR。", "privatePortWarnWithFrom": "{{service}} 将只允许指定来源；仍请确认 IP／CIDR 正确。", "allowFrom": "来源 IP／CIDR（可选）", "allowFromHint": "留空 = 全部来源；填写后只允许该 IP 或网段连入此端口", "allowFromPlaceholder": "例 203.0.113.10 或 10.0.0.0/8", "customPort": "自定义端口（如 8080 或 30000:30100）", "allowedPort": "已允许 {{proto}}/{{port}}", "allowedPortFrom": "已允许 {{proto}}/{{port}}（来源 {{from}}）", "allowThisPort": "允许此端口", "allowPortHint": "默认 Web 主机应保留 22／80／443；DB／Redis／Panel 请用来源 IP 限制，勿对全世界 allow。", "denyTitle": "永久拒绝 IP", "denySub": "UFW DENY · 与 fail2ban 临时 ban 不同", "denyPlaceholder": "要拒绝的 IPv4 或 IPv6", "deniedOk": "已永久拒绝", "removedDeny": "已移除 DENY", "remove": "移除", "noDenyRules": "没有永久拒 IP 规则", "oneClickProfiles": "一键配置档", "oneClickDesc": "写入管理脚本并套用 UFW（不会装 fail2ban — 请到 fail2ban 页）", "customApply": "自定义套用", "allowSmtp": "允许 SMTP／IMAP 端口", "extraTcp": "额外 TCP 端口", "extraTcpHint": "点选预设组合；可再自定义逗号／范围", "noExtra": "无额外", "mailGroup": "邮件组", "customExtraPlaceholder": "自定义：8080,9000:9010", "appliedCustom": "已套用自定义规则", "applyToSystem": "套用到系统", "deletedRule": "已删 #{{n}}", "deleteRuleTitle": "删规则 #{{n}}？", "deleteRuleDesc": "将从 UFW 移除该规则编号（需系统变更权限）。", "servicesTitle": "托管服务端口", "servicesHint": "YSK 托管服务的期望网络暴露。启动服务时会自动同步这些规则。", "servicesUfwOff": "UFW 已關閉。此列表只是預期暴露，並非主機上已強制執行的規則。", "servicesEmpty": "尚无服务暴露数据", "servicesEmptyDesc": "启动托管服务（Web、FTPS、VPN、数据库…）后会出现在此列表。", "servicesManualHint": "手动开端口 chips 在「端口」分页 — 建议在此管理，规则会带 ysk-svc 标记。", "portsManualHint": "高级手动规则。托管软件请优先用「服务」分页。", "colService": "服务", "colMode": "模式", "colPorts": "端口", "colSync": "状态", "synced": "已同步", "syncNow": "立即同步", "disableConfirmTitle": "停用 UFW？", "disableConfirmDesc": "主机防火墙将停止过滤流量。若主机在公众网络上，SSH 与面板可能直接暴露。", "disableConfirmConsequence": "现有允许／拒绝规则仍会保留，但要重新启用 UFW 才会生效。", "desiredOnlyUfwOff": "设定：{{mode}} · UFW 关闭（未套用）", "syncNotApplied": "UFW 关闭 · 未套用" }, "ftp": { "title": "FTPS 账户", "accountsCount": "{{count}} 账户", "accounts": "账户", "applied": "已应用", "pendingApply": "待应用", "sftpKeys": "SFTP 钥", "softwareMissing": "尚未安装 FTPS 服务所需软件", "ftpAccounts": "FTP 账户", "sftpPubkeys": "SFTP 公钥", "homeDir": "家目录", "domain": "域名", "user": "用户", "keyFingerprint": "密钥指纹（前缀）", "createHint": "请先在「FTP 账户」分页创建账户，再回来登记公钥。", "pubkeyHint": "点击「+ 新增公钥」，选择 FTP 用户并粘贴 ssh-ed25519 或 ssh-rsa 公钥整行。", "sftpKeyInvalid": "需要用户名，以及以 ssh- 开头的公钥。", "quickSelect": "快速选择账户", "quickSelectHint": "点用户名帶入新增公钥表单", "editAccount": "编辑 FTP 账户", "createAccount": "创建 FTP 账户", "accountModalDesc": "域名与家目录请从列表选擇；无列表时可手填。保存后需「应用」才写入 vsftpd", "usernameHintCreate": "英数、点、下划线、减号；创建后不可改", "usernameHint": "英数、点、下划线、减号", "newPasswordOptional": "新密码（可留空）", "passwordKeepHint": "留空表示不变更", "passwordMin8": "至少 8 字符", "domainHint": "对应站点或邮件域名，用于分组与路径建议", "domainPh": "可先创建站点／邮件域名，或暂时输入", "homeHint": "用户登录后的根目录（chroot 后可见範圍）", "addPubkey": "新增 SFTP 公钥", "addPubkeyDesc": "选择账户、可选备注，并粘贴完整公钥一行。写入管理文件不代表已验证可连接。", "pubkeyAdded": "已新增公钥", "ftpUsername": "FTP 用户名", "ftpUsernameHint": "须与已登记的 FTP 账户相同", "ftpUsernamePh": "与 FTP 账户相同", "note": "备註", "noteHint": "方便识别设备，例如 笔记本／公司", "notePh": "笔记本 / 公司主机", "sshPubkey": "SSH 公钥", "sshPubkeyHint": "通常来自 ~/.ssh/id_ed25519.pub，整行粘贴", "deleteAccountTitle": "删除 FTP 账户？", "deleteAccountNamed": "删除 FTP 账户 {{name}}？", "deleteAccountDesc": "移除后请再应用", "deleteKeyTitle": "删除 SFTP 公钥？", "deleteKeyDesc": "会从管理档移除；系统 authorized_keys 可能仍需重载才生效。", "serviceTitle": "vsftpd 服务", "softwareMissingService": "FTPS 所需软件尚未安装", "lifecycle": "生命周期", "overview": "概览", "network": "网絡", "security": "安全", "installStart": "安装与启动", "listenPort": "监听端口", "accountCount": "账户数", "loginBanner": "登录横幅", "sslDomain": "SSL 域名", "plaintextInsecure": "明文 FTP（未开 TLS）— 不安全。对外开放 21 埠前请先启用 FTPS。", "plaintextPublicLive": "vsftpd 正以公网位址监听且未启用 FTPS，账号密码会明文传送。请启用 FTPS、改为仅本机监听，或输入 PLAINTEXT 确认后维持此状态。", "bindAddress": "监听范围", "bindAddressHint": "新安装预设仅本机。对外监听且未开 FTPS 需打字确认。", "bindLocal": "仅本机", "bindLocalHint": "127.0.0.1 — 本机测试可不开 TLS", "bindPublic": "公开", "bindPublicHint": "全部界面 — 请启用 FTPS，或确认 PLAINTEXT", "enableFtpsAndStart": "启用 FTPS 并启动", "publicPlainNeedConfirm": "公开明文 FTP 需输入 PLAINTEXT 确认", "plainConfirmTitle": "未开 FTPS 就对外启动 FTP？", "plainConfirmDesc": "21 埠会在公网位址接受明文登入与传输。", "plainConfirmC1": "网络上可见用户名与密码。", "plainConfirmC2": "PASV 会通告已设定的公网 IP。", "plainConfirmC3": "不会代你开主机防火墙或云安全组。", "plainConfirmAction": "启动明文 FTP", "pasvRange": "PASV 範圍", "forceTls": "强制 TLS", "allowWrite": "允许写入", "networkTitle": "网絡设置", "networkDesc": "监听端口与 PASV 被动模式；保存只改管理设置，应用才写入 vsftpd 并重启", "listenPortHint": "默认 21；若防火墙另开埠请一并放行", "customPort": "自定义埠", "ipStack": "IP 棧", "ipStackHint": "vsftpd 多数版本 listen 与 listen_ipv6 互斥；IPv6 用 listen_ipv6=YES", "listenConflictLive": "Live vsftpd.conf 有listen={{v4}} 和listen_ipv6={{v6}} — 两个YES 都将无法启动。", "listenConflictNeedFix": "首先修复listen/listen_ipv6（它们不能同时为YES），然后应用。", "fixListenIpv4": "仅使用 IPv4（listen=YES，listen_ipv6=NO）", "liveFileValue": "立即归档：{{value}}", "startBlockedFailed": "服务失败 - 在启动前应用有效的配置", "ftpsNeedCert": "首先选择一个证书域", "ipv4Only": "仅 IPv4", "ipv6Mapped": "IPv6（可 mapped）", "bannerHint": "连接成功后客户端可见的欢迎字符串", "pasvStart": "PASV 起始埠", "pasvStartHint": "被动模式资料通道起始", "customStart": "自定义起始", "pasvEnd": "PASV 结束埠", "pasvEndHint": "需 ≥ 起始埠；防火墙需放行此範圍", "openFirewallPage": "打开防火墙页", "customEnd": "自定义结束", "pasvPublicIp": "PASV 公网 IP", "detectPublicIp": "检测公网IP", "detectPublicIpTitle": "填写来自该主机的第一个非环回 IPv4", "pasvPublicIpHint": "NAT／雲主机可填公网 IP；本机可留空", "pasvIpRequired": "套用前请填写 PASV 公网 IP（NAT／云主机）。可探测或手动输入。", "optionalEmpty": "（可留空）", "securityTitle": "安全设置", "securityDesc": "TLS、写入权限与 chroot；变更后请应用并重启才会生效", "sslCertDomain": "SSL 证书域名", "sslCertDomainHint": "选已上传／申请的证书域名", "enableFtps": "启用 FTPS（SSL/TLS）", "enableFtpsDesc": "以 TLS 加密控制通道；建议开启", "forceTlsLogin": "强制 TLS 登录", "forceTlsLoginDesc": "拒绝明文 FTP；需客户端支援 FTPS", "allowWriteDesc": "关闭則账户仅能下载／列目录", "chrootUsers": "Chroot 用户", "chrootUsersDesc": "登录后锁在家目录，无法浏览系统其他路径", "writableChroot": "允许可写 chroot", "writableChrootDesc": "家目录可写时仍启用 chroot（vsftpd 常见需求）", "settingsSaved": "已保存设置", "installIncomplete": "无法完成安装", "ftpsReady": "FTPS 已就绪", "settingsApplied": "已应用设置", "opsResult": "操作结果", "saved": "已保存", "accountsList": "账户列表", "accountsListDesc": "创建后按「应用」同步到 vsftpd。服务未装时请先用上方安装，再到 ", "startService": " 启动。", "createAccountPlus": "+ 创建账户", "noFtpAccounts": "尚未有 FTP 账户", "noFtpAccountsDesc": "用列表右上角「创建账户」新增；可指定家目录与域名，再应用到系统。", "applyHint": "提示：应用只写入管理设置；真正聽端口需 vsftpd 服务为 active。", "sshdMatchNote": "；系统 sshd Match 设置后才真正生效。", "addPubkeyPlus": "+ 新增公钥", "noPubkeys": "尚未登录公钥", "pickDomain": "— 选擇域名 —", "currentDomain": "{{domain}}（目前）", "pickHome": "— 选择家目录 —", "currentHome": "{{path}}（目前）", "fullPath": "完整路径：", "emptyHomes": "若列表为空，请先创建项目或站点以生成家目录选项。", "pickAccount": "— 选择账户 —", "installFtpsBanner": "请使用上方横幅「一键安装」安装 FTPS，完成后再启动服务。", "applyRestart": "应用并重启", "afterInstall": "安装后即可使用 FTPS 账户登录。需系统管理员权限才能完成安装。", "saveSettings": "保存设置", "saveApplyHint": "保存只更新面板设置；「应用并重启」才写入 vsftpd.conf 并重载服务。", "installAndStart": "安装并启动", "manageAccounts": "账户", "openFirewallPorts": "开防火墙端口", "firewallPortsApplied": "已放行 TCP {{ports}}", "sftpTabDesc": "为 FTP 账户登记 SSH 公钥，以便使用 SFTP 免密登录。请先选择账户、粘贴公钥一行，再保存。", "sftpNeedAccountTitle": "尚无 FTP 账户", "sftpNeedAccount": "请先创建至少一个 FTP 账户，再为该用户登记公钥。", "sftpFilterLabel": "账户", "sftpFilterAll": "全部账户", "sftpKeyCount": "{{count}} 枚公钥", "sftpEmptyFiltered": "此账户尚无公钥", "sftpEmptyFilteredDesc": "“{{user}}”还没有登记的 SSH 公钥。", "sftpRegister": "登记公钥", "sftpAddedAt": "添加于 {{time}}", "sftpTechSummary": "技术细节（高级）", "sftpTechNote": "公钥会写入管理路径", "filterProject": "只显示此项目的 FTP 帐户", "clearProjectFilter": "显示全部帐户", "vsftpdFailedHint": "vsftpd 服务失败。请到服务分页查看设定与日志（listen 与 listen_ipv6 不可同时为 YES）。", "vsftpdFailedGeneric": "vsftpd 服务失败。请到服务分页查看现行设定与日志。", "stateFailed": "启动失败", "tabService": "服务" }, "geo": { "continents": { "AS": "亚洲", "EU": "欧洲", "NA": "北美洲", "SA": "南美洲", "AF": "非洲", "OC": "大洋洲", "AN": "南极洲" }, "countries": { "CN": "中国", "HK": "香港", "MO": "澳门", "TW": "台湾", "JP": "日本", "KR": "韩国", "KP": "朝鲜", "SG": "新加坡", "MY": "马来西亚", "TH": "泰国", "VN": "越南", "PH": "菲律宾", "ID": "印尼", "IN": "印度", "AU": "澳大利亚", "NZ": "新西兰", "US": "美国", "CA": "加拿大", "MX": "墨西哥", "BR": "巴西", "AR": "阿根廷", "GB": "英国", "IE": "爱尔兰", "DE": "德国", "FR": "法国", "NL": "荷兰", "BE": "比利时", "CH": "瑞士", "AT": "奥地利", "SE": "瑞典", "NO": "挪威", "DK": "丹麦", "FI": "芬兰", "PL": "波兰", "CZ": "捷克", "ES": "西班牙", "PT": "葡萄牙", "IT": "意大利", "RU": "俄罗斯", "UA": "乌克兰", "TR": "土耳其", "IL": "以色列", "AE": "阿联酋", "SA": "沙特", "EG": "埃及", "ZA": "南非", "NG": "尼日利亚", "PK": "巴基斯坦", "BD": "孟加拉", "IR": "伊朗", "IQ": "伊拉克", "RO": "罗马尼亚", "BG": "保加利亚", "HU": "匈牙利", "GR": "希腊", "LT": "立陶宛", "LV": "拉脱维亚", "EE": "爱沙尼亚", "BY": "白俄罗斯", "KZ": "哈萨克斯坦", "UZ": "乌兹别克斯坦", "CL": "智利", "CO": "哥伦比亚", "PE": "秘鲁", "VE": "委内瑞拉", "CU": "古巴", "SC": "塞舌尔", "PA": "巴拿马" }, "regions": { "CN-BJ": "北京", "CN-SH": "上海", "CN-TJ": "天津", "CN-CQ": "重庆", "CN-GD": "广东", "CN-ZJ": "浙江", "CN-JS": "江苏", "CN-SD": "山东", "CN-HN": "河南", "CN-HB": "湖北", "CN-HU": "湖南", "CN-SC": "四川", "CN-HE": "河北", "CN-FJ": "福建", "CN-AH": "安徽", "CN-JX": "江西", "CN-LN": "辽宁", "CN-JL": "吉林", "CN-HL": "黑龙江", "CN-SX": "山西", "CN-SN": "陕西", "CN-GS": "甘肃", "CN-QH": "青海", "CN-HA": "海南", "CN-YN": "云南", "CN-GZ": "贵州", "CN-GX": "广西", "CN-NX": "宁夏", "CN-XJ": "新疆", "CN-XZ": "西藏", "CN-NM": "内蒙古", "TW-TPE": "台北", "TW-TXG": "台中", "TW-KHH": "高雄", "HK-HK": "香港", "MO-MO": "澳门", "US-CA": "California", "US-NY": "New York", "US-TX": "Texas", "US-FL": "Florida", "US-WA": "Washington", "US-IL": "Illinois", "US-VA": "Virginia", "US-OR": "Oregon", "US-GA": "Georgia", "US-NJ": "New Jersey", "US-MA": "Massachusetts", "US-OH": "Ohio", "US-PA": "Pennsylvania", "US-AZ": "Arizona", "US-CO": "Colorado", "US-NC": "North Carolina", "US-MI": "Michigan", "US-NV": "Nevada", "JP-13": "东京", "JP-27": "大阪", "JP-14": "神奈川", "JP-23": "爱知", "KR-11": "首尔", "KR-26": "釜山", "SG-01": "Singapore", "AU-NSW": "New South Wales", "AU-VIC": "Victoria", "GB-ENG": "England", "DE-BE": "Berlin", "DE-BY": "Bayern", "RU-MOW": "Moscow", "RU-SPE": "St Petersburg" } }, "hostBrowse": { "tabBrowse": "主機瀏覽", "subtitle": "經主機出站代理瀏覽外網或內網；目標站不會看見你本機瀏覽器身分。", "modeInternet": "外網", "modeIntranet": "內網", "modeHint": "外網會拒絕私網 IP；內網可開啟 LAN。兩者均拒絕 cloud metadata。", "urlPlaceholder": "https://example.com 或 192.168.1.1", "go": "前往", "back": "返回", "forward": "前進", "reload": "重新整理", "stop": "停止", "clearCookies": "清除 Cookie", "clearCookiesConfirm": "这会清除此代浏览工作阶段在主机上的 Cookie。已登入的网站需要重新登入。", "closeSession": "關閉工作階段", "copyUrl": "複製網址", "newSession": "新工作階段", "privacyOn": "私隱代瀏覽", "viaHost": "經主機", "emptyTitle": "主機代瀏覽", "emptyBody": "請輸入網址。DNS、TLS 與出站由本伺服器處理，而非你的桌面瀏覽器。Cookie 僅存於伺服器 jar。", "needUrl": "请先在上方输入网址开始会话。", "ssrfBlocked": "已由安全政策攔截（SSRF／模式）", "loadFailed": "主機擷取失敗", "sessionReady": "工作階段就緒", "noSession": "尚未建立工作階段", "statusLine": "{{status}} · {{ms}}ms · {{type}} · 經主機", "cookies": "Cookie", "latency": "延遲", "locked": "HTTPS", "insecure": "HTTP", "loading": "載入中…", "modeSwitchHint": "切換模式會開啟新工作階段並清除 Cookie。", "copied": "已複製網址", "downloadHint": "非 HTML 回應 — 請查看內容框或重新導航。", "engineLabel": "引擎", "engineProxy": "代理", "engineBrowser": "真實瀏覽器", "engineSwitchHint": "切換引擎會開啟新工作階段。", "needChrome": "真實瀏覽器需要系統 Chrome／Chromium（或於設定指定路徑）。否則請使用代理模式。", "engineBrowserNeedChrome": "真实浏览器（未安装 Chrome）", "egressHint": "目标站会看见此服务器的出站位址（{{host}}），不是你本机。Cookie 留在服务器工作阶段。", "needChromeFallback": "Chrome 不可用 — 已切換至代理引擎。", "liveError": "即時串流失敗", "liveWaiting": "正在連線至主機瀏覽器…", "tabSettings": "設定", "softwareNeeded": "真實瀏覽器引擎需要 Chromium／Chrome", "softwareHint": "一鍵經 apt 安裝發行版 Chromium。若已安裝 Google Chrome 亦會自動偵測。需要 root 與 YSK_EXECUTE=1。", "closeNoSession": "尚未建立工作阶段", "goInstallChrome": "前往軟件分頁", "settingsIntro": "以下面板設定會覆寫主機瀏覽相關環境變數。", "settingsEngine": "預設引擎", "engineAuto": "自動", "settingsChromePath": "Chrome／Chromium 路徑", "settingsChromePathHint": "留空 = 自動偵測。例如 /usr/bin/google-chrome", "settingsLoopback": "內網模式允許 loopback（127.0.0.1）", "settingsNoSandbox": "Chromium --no-sandbox（僅限 container）", "settingsSave": "儲存設定", "settingsSaved": "主機瀏覽設定已儲存", "envHintsTitle": "程序環境變數（唯讀；面板已設定時優先採用面板值）", "stream": { "label": "畫質", "smooth": "流暢", "balanced": "均衡", "sharp": "高清" }, "zoom": { "label": "縮放", "fit": "適合窗口", "fill": "填滿" }, "retryNav": "重試導航", "retryLive": "重連畫面", "tryProxy": "改用代理引擎", "err": { "LIVE_NO_FRAME": "畫面串流逾時：尚未收到主機畫面。請重連畫面或重試導航。", "LIVE_WS_FAIL": "即時連線失敗。請重連畫面。", "SSRF_BLOCKED": "目標位址已被安全政策攔截。", "BOT_CHALLENGE": "目標頁面可能要求人機驗證或阻擋自動化瀏覽；請在畫面上完成驗證，或改用其他網絡。", "TIMEOUT": "載入逾時。請重試。", "DNS_FAIL": "網域名稱解析失敗。", "TLS_FAIL": "安全連線（TLS）失敗。", "NAV_FAIL": "導航失敗。", "CHROME_LAUNCH": "無法啟動主機 Chromium。請檢查軟件安裝與 no-sandbox 設定。", "SESSION_GONE": "工作階段已失效。請重新前往。", "NEED_CHROME": "需要安裝 Chrome／Chromium。" }, "home": "主頁", "bookmark": "書籤", "bookmarkAdd": "加入或移除書籤", "bookmarkList": "書籤清單", "bookmarks": "書籤", "history": "瀏覽記錄", "bookmarkToggled": "已更新書籤", "newTab": "新分頁", "fullscreen": "全螢幕", "mediaNote": "真实浏览器：视频会流到面板。在设置启用音频桥接即可听到页面声音（需用户操作）。", "isolationNote": "真實瀏覽器會建立臨時 Linux 用戶隔離 Chrome；離開頁面或逾時會結束並刪除該用戶。", "resumeHint": "可恢复上次浏览（{{count}} 个标签页）", "resumeHintDetail": "可恢复上次浏览（{{count}} 个分页）· {{url}} · {{when}}", "resumeHintOwned": "可恢复 {{user}} 上次浏览（{{count}} 个分页）· {{url}} · {{when}}", "clearSessionData": "清除工作阶段资料", "clearSessionConfirm": "这会舍弃上一工作阶段的还原快照，之后不能还原那些分页。", "resume": "恢复", "resumeDismiss": "关闭", "resumeDone": "已恢复会话", "settingsSafety": "浏览安全", "settingsSafetyHint": "严格会拦截更多高风险主机；宽松允许更广的内网目标。不会关闭云端元数据的 SSRF 防护。", "safetyStrict": "严格", "safetyStandard": "标准", "safetyRelaxed": "宽松", "settingsBlockHosts": "封锁主机后缀", "settingsBlockHostsHint": "每行一个主机名或后缀（例如 malware.test）。精确与后缀匹配均会封锁。", "settingsAllowDangerousDownloads": "允许高风险下载（可执行文件/脚本）", "settingsAudioBridge": "将页面音频桥接到面板", "settingsAudioBridgeHint": "把主机 Chrome 音频流到此浏览器。部分网站需点击才能解锁播放。", "downloads": "下载", "downloadsEmpty": "此会话尚无下载", "downloadReady": "就绪", "downloadBlocked": "已封锁", "downloadPending": "处理中", "downloadFailed": "失败", "downloadSave": "保存", "audioUnlock": "启用声音", "audioUnlockHint": "点击以解锁此标签页音频播放", "audioUnlocked": "音频已解锁", "audioPlaying": "正在播放音频", "audioNeedsUnlock": "音频需解锁", "audioBridgedHint": "页面音频已由主机浏览器桥接", "audioNotBridged": "音频关闭", "audioNotBridgedHint": "在设置中开启音频桥接即可听到页面声音", "mediaPolicyTitle": "真实浏览器媒体", "mediaVideoLabel": "视频", "mediaVideoDesc": "在主机上渲染，再以画面流到面板。", "mediaAudioLabel": "音频", "mediaAudioDesc": "可选自主机 Chrome 的桥接；可能需要解锁点击。", "mediaPolicyLabel": "策略", "mediaPolicyDesc": "下载与自动播放遵循上方安全与下载设置。", "frameBlocked": "页面无法在面板框架内显示。", "historyEmpty": "此工作阶段尚无浏览记录。", "bookmarksEmpty": "尚未有书签。", "closeSessionHint": "会清掉此浏览工作阶段的 Cookie；书签会保留。", "envUnset": "未设置", "envPanelValue": "面板：{{value}}", "envColVar": "变量", "envColHost": "主机进程", "envColPanel": "面板设置", "envColEffective": "生效值", "settingsNoSandboxWarn": "会关闭 Chromium 沙箱。只应在可信的 container 内使用。下次真实浏览器工作阶段才生效。", "settingsDangerDlWarn": "允许经主机浏览器下载可执行文件与脚本。请确认确实需要。", "settingsDangerConfirmTitle": "启用高风险浏览设置？" }, "legal": { "hubTitle": "法律文件", "hubSub": "YSK Server 的使用条款、隐私政策与免责声明", "terms": "使用条款", "privacy": "隐私政策", "disclaimer": "免责声明", "updated": "最后更新日期：{{date}}", "englishPrevails": "正式语言为英文及香港书面中文。如有歧义，以英文为准。", "notOfficialLocale": "你的界面语言并非正式法律语言。除非你切换，以下具约束力的文本为英文。", "officialLang": "正式文本", "officialEn": "英语", "officialZh": "繁体中文（香港）", "signIn": "登录", "mitNote": "源代码以 MIT 许可。本页为额外使用条件。", "backToIndex": "全部法律文件" }, "listToolbar": { "searchPlaceholder": "搜索…", "searchAria": "搜索列表", "clearSearch": "清除搜索", "clearAll": "清除筛选", "resultCount": "{{count}} 项结果", "showingOf": "显示 {{shown}} / {{total}}", "activeFilters": "已应用 {{count}} 个筛选", "noResults": "无匹配结果", "noResultsHint": "试试其他关键词，或清除筛选。", "searching": "搜索中…", "emptyChip": "此筛选没有项目" }, "logViewer": { "banIpTitle": "到防护中心 ban {{ip}}", "filter": "筛选", "filterPh": "关键字", "levels": "级别", "wrap": "换行", "follow": "跟随", "download": "下载", "nextError": "下一则错误", "prevError": "上一则错误", "lines": "{{n}} 行", "shown": "显示 {{n}}", "errors": "错误 {{n}}", "warnings": "警告 {{n}}", "all": "全部", "empty": "没有日志行" }, "login": { "title": "登录 YSK Server", "subtitle": "服务器控制台", "username": "用户名", "password": "密码", "submit": "登录控制台", "failed": "登录失败，请检查账号或密码", "footer": "产品由 YSK Limited 提供", "totpRequired": "此账户已开启 2FA，请输入 6 位验证码", "totpLabel": "双重验证码", "totpHint": "Authenticator 应用中的 6 位数字", "submitting": "登录中…", "sessionExpired": "登录已失效，请重新登录", "newPassword": "新密码", "newPasswordAgain": "再次输入新密码", "changePassword": "更改密码", "passwordMismatch": "两次输入的密码不一致", "passwordChanged": "密码已更新" }, "logs": { "catSystem": "系统文件", "catMail": "邮件", "catSecurity": "安全", "catApp": "应用", "catOther": "其他", "journalService": "Journal 服务", "unavailable": "不可用", "compressed": " · 压缩", "noLogFileYet": "（尚未有 log 档）", "afterDeploy": "部署后会出现", "logsLoaded": "已加载日志", "sseFailed": "SSE 串流失败，改用轮询", "sseInterrupted": "SSE 中断", "settingsSaved": "设定已保存", "exportedJsonl": "已导出 JSONL", "exported": "已导出", "bookmarkSaved": "已存书签", "title": "日志中心", "fullAccess": "完整权限", "nonRoot": "非 root", "noExecute": "无 EXECUTE", "error": "错误", "projectLog": "项目 log", "filesCount": "{{count}} 档", "tabExplore": "探索", "tabMaint": "维护", "tabSettings": "设定", "tabAbout": "说明", "sources": "日志来源", "filterPlaceholder": "筛选 unit / 文件…", "filterSources": "筛选来源", "noProjectLogs": "未发现项目 log — 部署项目后会出现", "noMatchSources": "无匹配来源", "projectPrefix": "项目 · ", "timeRange": "时间范围", "unlimited": "不限", "priority": "优先级", "all": "全部", "keywordIp": "关键字 / IP…", "custom": "自定义", "copied": "已复制", "truncated": " · 已截断", "following": " · 跟随中", "followingSse": " · 跟随中 (SSE)", "loadingSources": "加载来源中…", "pickSource": "选左側来源，或按快捷 · 再按「查询」", "noRowsInWindow": "该时间窗口内没有记录", "showInactiveUnits": "显示非活动单位", "sseNeedFollow": "先开启关注——SSE仅用于实时尾随", "maintOverview": "维护概况", "executable": "可执行", "restricted": "受限", "needRootExecute": "需 root+EXECUTE", "retention": "保留时间", "retentionHint": "例 7d · 14d · 30d", "defaultLines": "默认行数", "followInterval": "跟随间隔", "maxBytes": "最大字节", "maskSecrets": "遮罩 secret", "defaultVacuumDays": "默认 vacuum 天数", "d7": "7 日", "d14": "14 日", "d30": "30 日", "d90": "90 日", "journalAlerts": "Journal 告警", "autoVacuum": "自动 vacuum", "deleted": "已删", "bookmarkDeleted": "已删书签", "opsResult": "操作结果", "saveBookmark": "保存书签", "bookmarkNamePrompt": "为目前查询條件命名", "query": "查询", "follow": "跟隨", "export": "导出", "vacuum": "清理（Vacuum）", "loadFailed": "加载失败", "projectLogsLink": "项目 → 日志", "projectLogsDesc": " — 单站快捷 + 深鏈", "queryFollow": "查询与跟隨", "queryFollowDesc": "探索页预设行数、跟隨节奏、回应上限", "retentionAlerts": "保留与告警", "retentionAlertsDesc": "vacuum 预设、journal 磁碟告警、自动清理时间窗", "dailyNeedRoot": "每日（需 root + EXECUTE）", "customAllow": "自定义 allow 路径", "customAllowDesc": "僅 /var/log 或 /run/log · 拒绝 .ssh、密钥、/etc", "pathsCount": "{{n}} 條", "noCustomPaths": "尚未加入自定义路径", "bookmarks": "书籤", "bookmarksDesc": "探索页常用过滤；开启会切回探索并应用来源", "noBookmarks": "尚未有书籤 — 在探索页查询后按「书籤」保存", "settingsWriteNote": "设置写入面板 DB；自动 vacuum 由排程每 15 分鐘检查时间窗。", "saveSettings": "保存设置", "vacuumDaysQ": "Vacuum 时间 {{days}}？", "vacuumSizeQ": "Vacuum 大小 500M？", "vacuumDesc": "journalctl vacuum 会删除舊日志，不可复原。", "vacuumRequested": "已请求 vacuum", "vacuumSizeRequested": "已请求 vacuum size", "scLogs": "观测 journal／文件／项目", "scProtection": "攻擊应变、自动 ban（点 IP）", "shortcuts": "快捷", "projectsOnly": "只显示项目", "filesTitle": "{{n}} 档", "bookmarksLabel": "书签", "filter": "筛选", "followSec": "跟随 {{sec}}s", "wrap": "换行", "bookmark": "书签", "standby": "待命", "partialFail": "部分／失败", "lines": "{{n}} 行", "followingSseDyn": " · 跟随中{{sse}}", "ipBan": "IP → 封禁", "vacuumNote": "释放 systemd-journald 占用的磁盘。没有系统变更权限时会封锁，不会假装成功。", "vacuumTime": "依保留时间清理", "vacuumNeedRetention": "请先填写保留时间（例如 14d）", "vacuumNeedConfirm": "需确认 — 会删除旧 journal 日志", "vacuumSizeNeedConfirm": "需确认 — 会限制 journal 磁盘用量", "vacuumHint": "建议保留 ≥7 日；操作后重新探测磁盘用量。", "logrotateStatus": "系统 logrotate 状态（只读探测）", "logrotateMissing": "无 status 档或不可读 — 可于服务矩阵检查 logrotate 套件", "relatedOps": "相关运维", "relatedOpsDesc": "日志观测 vs 攻击应变分工", "scLogsLine": "观测 journal／文件／项目", "scProtLine": "攻击应变、自动 ban（点 IP）", "journalVacuumTitle": "清理 journald 磁盘", "journalSection": "杂志", "sseLabel": "SSE", "logrotateLabel": "对数旋转", "srcNginx": "nginx", "srcSsh": "SSH", "srcfail2ban": "失败2禁止", "srcFail2ban": "失败2禁止", "srcAuthLog": "验证日志", "srcNginxError": "nginx 错误", "srcLetsEncrypt": "让我们加密", "groupJournal": "杂志", "groupVarLog": "/var/log", "prioErr": "错误+", "prioWarn": "警告+", "prioInfo": "信息+", "vacuumSize": "限制至 500 MB", "logrotateNoStatus": "尚未有 logrotate 状态档（从未跑过时属常见）。", "autoVacuumOff": "自动清理未启用。启用前时间设定不会执行。", "aboutAllowlist": "探索只可读允许清单内的 journal 单元与 /var/log 路径，不会提供任意主机路径。", "aboutCustomPath": "请在「设置」加入自定义路径（仅限 /var/log 或 /run/log），再到「探索」开启。", "vacuumSizeAlreadyBelow": "目前用量已低于上限，此操作通常无动作", "vacuumSizeNoopDesc": "journal 已低于 500 MB。仍会执行 vacuum --size=500M，通常不会删除任何内容。", "journalDiskHint": "目前 systemd-journald 用量（作用中 journal）。不含 /var/log 下的轮替档。", "varLogDiskHint": "/var/log 的估算用量（含轮替档）。", "queryFirst": "请先查询", "errorsWindowHint": "上次概览探测的近期错误（切换分页不会重算）", "sourceCount": "显示 {{shown}}", "sourceUnavailable": "此来源尚未产生日志", "sourceNoLog": "尚无日志", "projectSourcesTitle": "{{n}} 个来源（文件 + journal）", "logrotatePath": "小路", "logrotateLast": "上次旋转", "exportJsonl": "汇出 JSONL", "sseLive": "（即时串流）", "logrotateExpand": "显示另外 {{n}} 个", "logrotateCollapse": "显示更少", "logrotateVersion": "状态版本 {{v}}" }, "metrics": { "alert": { "memory_high": "内存偏高", "load_high": "负载偏高", "disk_high": "磁盘偏高" }, "loadFailed": "加载指标失败", "projectUsageFailed": "项目用量加载失败", "procListFailed": "进程列表失败", "streamEnded": "stream 已结束（{{reason}}）", "streamOpenFailed": "无法打开 stream", "signalFailed": "信号失败", "detailFailed": "无法加载详情", "alertCount": "{{count}} 条告警", "attention": "需留意", "normal": "正常", "disk": "磁盘", "alerts": "告警", "auto5s": "自动 5s", "hostSettings": "主机设置", "loading": "加载指标…", "tabs": { "overview": "概览", "live": "实时进程", "disk": "磁盘", "projectUsage": "项目用量", "alerts": "告警" }, "load": "负载", "load1m": "负载 1 分钟", "uptime": "运行时间", "filterCpu5": "≥5%CPU", "filterMem5": "≥5% 内存", "signalHint": "先勾选进程，再送 TERM 或 KILL。", "signalFromRow": "选取此进程以便送讯号", "selectForSignal": "选取", "forceKillTitleNamed": "KILL PID {{pid}}（{{cmd}}）？", "sendSigTitleNamed": "向 PID {{pid}}（{{cmd}}）送 TERM？", "min1": "1 分", "min5": "5 分", "min15": "15 分", "loadHint": "相对 {{cpus}} CPU；高于 1.0× 表示可能排队。", "memory": "内存", "total": "总量", "available": "可用", "mainDisk": "主磁盘", "path": "路径", "diskReadFail": "无法读取磁盘", "viewAllMounts": "查看全部 {{count}} 个 mount →", "nAlerts": "{{count}} 告警", "details": "详情", "noThresholdAlerts": "目前无内存／负载／磁盘阈值告警", "projectDisk": "项目磁盘（真实 du）", "viewAllProjectUsage": "查看全部项目用量 →", "loadProjectDisk": "加载项目磁盘用量（真实 du）→", "followSse": "跟随（SSE）", "interval": "间隔", "sort": "排序", "rows": "行数", "onceQuery": "单次查询", "procSearchPh": "搜索 PID / USER / COMMAND", "procSearchAria": "搜索进程", "filterAll": "全部", "filterMine": "非系统", "selectedN": "选中 {{count}}", "showOf": " · 显示 {{shown}}/{{total}}", "topLoading": "加载 top 摘要中…（/proc/stat 双样本）", "topAria": "top 摘要", "perCore": "每核", "noPerCore": "无每核数据", "uptimeDays": "{{d}} 天，{{h}}:{{m}}", "used": "已用", "free": "空闲", "signal": "信号", "kill": "结束", "send": "送出", "procDetail": "进程详情", "refreshProc": "刷新进程", "noProcs": "没有进程", "noProcsFilter": "没有符合筛选的进程", "mounts": "挂载点", "fs": "文件系统", "mount": "挂载", "size": "容量", "usage": "用量", "project": "项目", "quota": "配额", "ratio": "占比", "unlimited": "无限制", "noProjects": "尚无项目", "noProjectsDesc": "创建项目后可在此看真实 home 用量", "usageNote": "用量来自本机 du（非估算）。配额为控制面 soft limit；硬 setquota 需「套用限制到系统」。", "thresholdAlerts": "阈值告警", "alertsBuiltinOnly": "仅内置 CPU/内存/磁盘阈值。没有电子邮件、网络钩子或 Slack 通道。", "lastEvaluated": "最后检查", "alertsOkTitle": "目前正常", "alertsOkDesc": "没有内存／负载／磁盘阈值告警。", "cpu": "中央处理器", "command": "命令", "user": "用户", "clearSelection": "清除选择", "batchSignal": "批量信号", "liveHint": "实时进程列表（SSE 或轮询）。信号需 root + YSK_EXECUTE。", "signalTo": "信号 {{sig}} → PID {{pid}}", "procAlive": "进程仍在（kill -0 成功）", "procGone": "进程已结束", "procTable": "进程 ({{count}}{{more}})", "procTableDesc": "ps 列表 · 勾选后可 TERM/KILL（需 YSK_EXECUTE）", "selectAllAria": "全选筛选结果", "selectPidAria": "选取 PID {{pid}}", "controlPlane": "控制面", "controlPlaneNoSignal": "不可对控制面进程送出讯号", "protectedPid": "无法从面板发出 PID 1 / init / systemd 信号", "sigTermTitle": "发送SIGTERM（要求进程退出）", "sigKillTitle": "发送SIGKILL（强制杀死——无法被捕获）", "batchTerm": "TERM", "batchKill": "杀", "rawTopLabel": "原始上衣（未翻译）", "followSseLabel": "关注（直播）", "alertsReadOnly": "仅内置 CPU/内存/磁盘阈值。没有电子邮件、网络钩子或 Slack 通道。", "alertsGoNotifications": "打开通知中心", "lastCheck": "最后检查", "rawTopHint": "未翻译的 top(1) 输出", "detailShort": "详", "procUnavailable": "无法取得进程", "noProcData": "尚无进程数据", "noProcFilter": "无符合筛选的进程", "clickOnceOrFollow": "按「单次查询」或开跟随", "liveFootnote": "等同 SSH top：/proc/stat 双样本算 %Cpu（开「每核」= top 按 1）、Mem/Swap、Tasks；进程表来自 ps。不是交互 PTY。Kill 需 YSK_EXECUTE；PID 1 与控制面默认保护。", "forceKillTitle": "强制结束 PID {{pid}}（SIGKILL）", "sendSigTitle": "向 PID {{pid}} 发送 SIG{{sig}}", "forceKillDesc": "无法拦截，可能丢数据。命令：{{cmd}}", "termDesc": "进程可自行清理后退出。命令：{{cmd}}", "forceKillBtn": "强制 KILL", "sendTermBtn": "发送 TERM", "procPidTitle": "进程 PID {{pid}}", "readingProc": "读取 /proc…", "applyRenice": "套用 renice", "reniceHint": "-20 最高优先 · 19 最低（需 EXECUTE）", "noData": "无数据", "shareOfMeasured": "占已量度 {{pct}}%", "mountsTitle": "磁盘 mounts ({{count}})", "mountsDesc": "真实 df -P -B1（已过滤 tmpfs 等）", "noMounts": "无 mount 列表", "noMountsDesc": "df 不可用或被过滤。主磁盘仍见于概览。", "seeProjectUsage": "项目 home 用量见「项目用量」分页（真实 du · 共 {{size}}）", "measuringDu": "测量项目 home（du）…", "projectUsageTitle": "项目磁盘用量 ({{count}})", "projectUsageDesc": "真实 du · 合计 {{total}} · {{at}}", "projectUsageDescEmpty": "对各项目 home_dir 执行 du", "remeasure": "重新测量", "usageNoteFull": "用量来自本机 du（非估算）。配额为控制面 soft limit；硬 setquota 需「套用限制到系统」。", "sseNeedLogin": "未登录，无法开启 SSE", "sseSessionExpired": "未登录或 session 失效，无法开启 SSE", "sseHttpError": "流 HTTP {{status}}", "colFilesystem": "文件系统", "colMount": "挂载点", "colSize": "容量", "colUsed": "已用", "colAvail": "可用", "colUsePct": "使用率", "colHome": "主目录", "usageNoteLink": "配额是控制面软上限。要套用硬限制请到专案「隔离」分页。", "shareNoQuotaHint": "未设配额，故无占比。请到项目「隔离」分页设定配额。", "setQuotaLink": "设定配额", "unusualHome": "非标准路径", "unusualHomeHint": "不是 /home/... 项目主页。规范隔离是 /home/ysk-server-{id}。" }, "migrate": { "tabInventory": "盘点", "tabTarget": "目标", "tabRun": "执行", "tabDone": "完成", "refreshFailed": "刷新失败", "migrateIncomplete": "迁移未完成", "requestFailed": "迁移请求失败", "title": "整机迁移", "subtitle": "来源控制面 → 新机全量复制。完成后只改公网 IP／DNS，账号、路径与项目保持一致。", "inventorying": "盘点中", "inventoried": "已盘点", "inventoriedWarn": "已盘点 · {{n}} 警告", "inventoriedOrphans": "已盘点 · {{n}} 个孤立主目录", "inventoriedWarnAndOrphans": "已盘点 · {{w}} 则警告 · {{n}} 个孤立主目录", "inventoryFailed": "盘点失败", "pendingInventory": "待盘点", "projects": "项目", "mailboxes": "信箱", "users": "用户", "software": "软件", "jobs": "工作", "notFound": "找不到", "wizard": "迁移向导", "jobLog": "工作记录", "about": "说明", "steps": "迁移步骤", "sourceInventory": "来源盘点", "sourceInventoryDesc": "只读扫描控制面与项目路径，不会修改系统", "inventoryRunning": "正在盘点本机…", "host": "主机", "projectHome": "项目 / home", "needSoftware": "需安装软件", "noInventory": "尚未取得盘点", "noInventoryHint": "按右上角「刷新」扫描本机状态与工作记录。API 需已加载 migrate 路由。", "targetHost": "目标主机", "targetHostDesc": "僅需 root SSH；密码只用于本次请求，不会写入数据库", "sshTarget": "SSH 目标", "sshPort": "SSH 埠", "targetDataDir": "目标 dataDir", "authMethod": "认证方式", "rootPassword": "Root 密码", "notPersisted": "不会持久化", "passwordNotStored": "密码只用于今次 SSH，不会写入磁盘。", "overwriteDanger": "覆写会取代目标机现有 YSK 资料，面板无法复原。", "outboundIdentity": "vault 内 outbound identity", "dryRun": "执行预检（dry-run）", "startMigrate": "开始整机迁移", "needSshTarget": "请填写 SSH 目标", "needMaintWindow": "请勾选维护窗", "needRootPassword": "请输入 root 密码", "needRequired": "请完成必要字段", "result": "迁移结果", "blocked": "已阻挡", "failed": "失败", "detail": "详细说明", "jobsTitle": "迁移工作（{{count}})", "jobsDesc": "状态落在 dataDir/migrate/；密码从不写入 job 档。按右上角「刷新」更新。", "phase": "阶段", "jobPhase": "工作 {{id}} · {{phase}}", "phaseName": { "failed": "失败", "done": "完成", "running": "进行中", "queued": "排队中", "cancelled": "已取消" }, "target": "目标", "updated": "更新", "notes": "备注", "noJobs": "尚无迁移工作", "noJobsHint": "在「迁移向导」完成一次 dry-run 或正式迁移后会出现在此。", "confirmTitle": "确认整机迁移", "confirmDesc": "即将对 {{target}} 执行全量 rsync 与目标 bootstrap。来源进入维护窗，过程可能数十分钟。密码僅本次使用。", "confirmStart": "确认开始", "cancel": "取消", "success": "成功", "unfilledTarget": "（未填目标）", "restartApiHint": "若刚部署新版本，请重启 API（", "afterRestart": "）后再按「刷新」。", "inventoryWarnings": "盘点警告（{{count}}）", "orphanHomesHint": "孤立项目主目录（store 无对应）。确认无用途后再删。", "orphanHomesTitle": "孤立专案主目录（{{count}}）", "orphanHomesSummary": "磁盘上有 {{count}} 条路径不在 store。不确定请先备份，确认无用后再删。", "orphanColHome": "主目录", "orphanColModified": "最后修改", "orphanColEntries": "目录项", "orphanEntries": "目录内有 {{n}} 个顶层项目", "orphanKpi": "孤立主目录", "sourceOs": "操作系统", "sourceDataDir": "数据目录", "sourceDbRedis": "数据库 / Redis", "sourceDbRedisValue": "{{db}} 个数据库 · {{redis}} 个 Redis", "orphanRemove": "删除孤立主目录", "orphanRemoveTitle": "删除此孤立项目主目录？", "orphanRemoveDesc": "将永久删除磁盘上的 {{path}}。这不是 store 内项目。需 YSK_EXECUTE=1。", "orphanRemovePhrase": "请输入 DELETE 确认。", "orphanRemoveNeedConfirm": "需确认", "orphanBackupFirst": "请先到备份页备份", "orphanMtime": "最后修改 {{at}}", "expandAllWarnings": "展开全部 {{n}} 则警告", "collapseWarnings": "收合", "moreWarnings": "…另有 {{n}} 則", "authPassword": "root 密码（安装临时密钥后改用 key）", "authIdentity": "SSH 身份庫 identityId", "authAgent": "本机预设 agent / 密钥", "confirmMaint": "确认维护窗", "confirmMaintDesc": "· 来源将短暂停服以保证 dump 一致（正式迁移必勾）", "allowOverwrite": "允许覆写目标既有 YSK 资料", "allowOverwriteDesc": "· 目标已有 ysk.json 时需勾选", "dryRunOnly": "僅 dry-run", "dryRunOnlyDesc": "· 只做盘点 + 预检，不 rsync、不写目标", "executeNote": "本机需 YSK_EXECUTE=1 且以 root 执行 API。迁移完成后请改 DNS A/AAAA，并检查雲防火墙与邮件 PTR。", "dnsCutover": "DNS cutover（需人工）", "dnsCutoverDesc": "将下列主机名的 A / AAAA 指到新机公网 IP；并确认 80/443/25/587 等防火墙与邮件 rDNS。" }, "multiCheck": { "customPlaceholder": "自定义代码", "searchPlaceholder": "搜索…", "emptyText": "无符合项目", "removeTitle": "点击移除", "noneSelected": "尚未选择", "optionsAria": "选项", "showingCapped": "显示前 {{shown}}／共 {{total}} 项 — 用搜索收窄", "add": "加入", "bulkAria": "批量选择", "selectAll": "全选", "selectAllTitle": "全选全部 {{n}} 项", "selectFiltered": "全选筛选（{{n}}）", "selectFilteredTitle": "全选当前搜索结果 {{n}} 项", "clearAll": "全不选", "clearFiltered": "清除筛选", "selectedCount": "已选 {{n}}／{{total}}", "chipsCollapsed": "已选 {{n}} 项 — 展开", "chipsCollapse": "收起" }, "nav": { "dashboard": "仪表盘", "ai": "AI 任务", "projects": "项目", "security": "账号安全", "email": "邮件", "files": "文件", "system": "系统套用", "updates": "更新", "agents": "AI Agent（实验）", "login": "登录", "logout": "退出", "publicFiles": "公共文件", "ftp": "FTPS", "ftpService": "FTPS", "mysql": "MySQL", "mysqlService": "MySQL 服务", "mariadb": "MariaDB", "mariadbService": "MariaDB 服务", "postgres": "PostgreSQL", "postgresService": "PostgreSQL 服务", "redis": "Redis", "redisService": "Redis 服务", "cluster": "丛集", "dns": "DNS", "ssl": "SSL 证书", "nginx": "Nginx", "node": "Node.js", "php": "PHP", "python": "Python", "go": "Go", "rust": "Rust", "protection": "防护中心", "firewall": "防火墙", "fail2ban": "fail2ban", "users": "用户与方案", "services": "服务状态", "metrics": "主机指标", "network": "网络接口", "logs": "日志中心", "cron": "Cron", "backups": "备份", "migrate": "整机迁移", "systemd": "systemd", "readiness": "就绪探测", "systemIndex": "系统工具", "sections": { "overview": "总览", "sites": "账号与站点", "mail": "邮件", "files": "文件与 FTP", "databases": "数据库", "dnsSsl": "域名与 SSL", "runtimes": "运行环境", "security": "安全", "system": "系统", "ai": "人工智能", "validators": "验证者节点", "containers": "容器" }, "java": "Java", "kotlin": "Kotlin", "bun": "Bun", "software": "软件中心", "terminal": "终端", "hostBrowse": "主機瀏覽", "cdn": "CDN", "vpn": "VPN", "vnc": "VNC", "apache": "Apache", "bookmarkedProjects": "已固定项目", "bookmarkedEmailDomains": "已固定域名", "bookmark": "固定到侧栏", "unbookmark": "取消侧栏固定", "bookmarkPinned": "已固定", "bookmarkAdded": "已固定到侧栏", "bookmarkRemoved": "已从侧栏移除", "btTracker": "BT Tracker", "support": "支持", "noAccessTitle": "没有权限", "noAccessDesc": "你的角色不能开启此页。如需使用，请向管理员申请。", "backToDashboard": "返回仪表板", "validators": "验证者节点 (Beta)", "docker": "Docker" }, "network": { "title": "网络接口", "canMutate": "可变更", "readOnlyBlocked": "只读／受阻", "statIfaces": "接口", "statUp": "已启用", "oper": { "up": "已启用", "down": "已停用", "unknown": "未知", "loopback": "永久启用", "loopbackHint": "回环界面一律可用，不可变更。", "other": "其他" }, "statGateway": "网关", "pageActions": "页面操作", "loadingSnap": "读取网络快照…", "mutateHint": "变更即时生效，重启可能还原。", "cannotMutate": "无法变更：需 EXECUTE 与 root。", "tabs": { "ifaces": "接口", "routes": "路由", "dns": "域名系统", "advanced": "高级", "about": "说明", "realip": "真实 IP / CDN" }, "ifaceSummary": "{{count}} 个接口 · {{up}} 個 UP", "noIfaces": "没有接口", "noIfacesDesc": "ip 不可用或無權读取", "colName": "名称", "colStatus": "状态", "ifaceOps": "{{name}} 操作", "routeTable": "路由表", "defaultGw": "預設网关 {{gw}}", "liveIpRoute": "即时 ip route", "noRoutes": "没有路由", "colDest": "目的地", "addRoute": "新增路由", "persistNm": "保存到 NetworkManager 连接（重启仍在）", "ephemeralRoute": "僅即时 ip route（重开可能消失）", "destPlaceholder": "default 或 10.0.0.0/8", "devOptional": "Dev（可选）", "defaultDev": "默认出口：{{dev}}", "saveNm": "保存（NetworkManager，重启不消失）", "ephemeralHint": "取消則只做即时 ip route add", "nmUnavailable": "NetworkManager 未运行 — 只能添加实时路由", "defaultRouteDownNeedName": "这是默认路由出口。输入接口名称进行确认 - 面板可能会断开连接。", "saveRoute": "保存路由", "dnsSettings": "DNS 设置", "dnsNmHint": "经 NetworkManager 写入连接「{{conn}}」并重连（持久）", "dnsCannotApply": "当前无法套用：需 NetworkManager 活动连接 + EXECUTE + root", "mode": "模式", "connection": "连接", "source": "来源", "ignoreAutoDns": "现况 ignore-auto-dns", "ignoreYes": "yes（忽略 DHCP DNS）", "ignoreNo": "no（跟 DHCP）", "nameserverEditHint": "可加减服务器；套用写入 NetworkManager 并重连", "routerDns": "路由器 {{dns}}", "current": "当前", "serverList": "服务器列表", "emptyDnsTitle": "尚未加入 DNS", "emptyDnsDesc": "按「加服务器」开始", "keepOneRow": "至少保留一列（可清空后再删）", "removeServer": "移除此服务器", "searchDomainsPlaceholder": "可选，空白分隔", "ignoreDhcpDns": "忽略 DHCP 自动 DNS（ipv4.ignore-auto-dns=yes）", "restoreDhcpHint": "用「还原 DHCP DNS」可交回路由器分配", "noNmConnection": "無可用 NM 连接 — 不會盲改 /etc/resolv.conf（避免假成功）。", "needExecuteRoot": "需 YSK_EXECUTE=1 与 root 才会真写入。", "resolveTest": "解析测试", "resolveTestDesc": "getent ahosts（本机实际解析结果）", "hostname": "主机名", "testFailed": "测试失败", "stackDetect": "本机网络堆栈检测", "available": "可用", "unavailable": "不可用", "persistNmCap": "可持久化（NM）", "ifaceDetail": "接口 {{name}}", "type": "类型", "addresses": "地址", "noAddresses": "无地址", "ifaceAdjust": "接口调整", "addIpTitle": "加 IP · {{name}}", "saveIp": "保存 IP", "add": "新增", "cidrPlaceholder": "例：10.0.0.5/24 或 2001:db8::5/64", "saveIpHint": "寫入连接 +ipv4/ipv6.addresses 並 connection up", "confirmIfaceName": "输入接口名「{{name}}」确认", "deleteRouteTitle": "删除路由？", "deleteRouteNamed": "删除路由 {{dst}}？", "deleteRouteBody": "将从即时路由表移除 {{dst}}{{via}}{{dev}}。", "viaGw": " 经 {{gw}}", "onDev": " 装置 {{dev}}", "deleteDefaultWarn": "— 删除 default 可能断线。", "alsoRemoveNm": "同時從 NetworkManager 连接移除（重开不再出現）", "loadFailed": "加载失败", "loadNetworkFailed": "加载网络失败", "on": "开", "off": "关", "addServer": "加服务器", "applyDns": "套用 DNS", "restoreDhcpDns": "还原 DHCP DNS", "test": "测试", "refresh": "刷新", "hostSettings": "主机设置", "protection": "防护中心", "defaultEgressBadge": "默认", "opsAria": "{{name}} 操作", "details": "详情", "addIp": "加 IP", "reset": "重置", "ephemeralOnly": "仅即时", "saveRouteHint": "保存会写入 NM 连接并 connection up；", "deleteShort": "删", "resetForm": "重置表单", "applyDnsNotes": "套用后会 nmcli connection modify + up；短暂断线属正常。stub 127.0.0.53 不会写入（本机 resolved 内部用）。", "testResolve": "测试解析", "loadRaw": "加载 raw 输出", "hideRaw": "隐藏 raw 输出", "rawLoadedAt": "加载时间 {{time}}", "confirmDown": "确认 Down", "linkDownTitle": "將 {{name}} 離線", "linkDownNeedConfirm": "需輸入介面名稱確認", "defaultRouteDownWarn": "此接口是默认路由出口，down 后可能无法连上管理面板。", "deleteDefaultMayDrop": " — 删除 default 可能断线。", "deleteDefaultPanelWarn": "删除默认路由可以删除此面板会话。键入 DEFAULT 进行确认。", "deleteDefaultNeedConfirm": "需确认 — 请输入 DEFAULT（可能中断本面板）", "deleteRouteNeedConfirm": "需确认", "typeDefaultToConfirm": "输入 DEFAULT 进行确认", "gateway": "网关", "nameservers": "名称服务器", "searchDomains": "搜索域", "backend": "后端", "cidr": "CIDR", "realip": { "title": "CDN / 真实用户 IP", "desc": "还原 CDN 后方访客 IP；只信任边缘 CIDR。", "provider": "默认供应商", "providerHint": "直连选 none；在 CDN 后选供应商。", "mode": "信任模式", "modeSingle": "单一供应商头（推荐）", "modeXff": "X-Forwarded-For + 合并 CDN CIDR", "customCidrs": "额外信任 CIDR", "customCidrsHint": "每行一个 CIDR。", "lastRefresh": "上次 CIDR 更新", "active": "当前默认", "republishHint": "保存后请重新发布项目 Nginx。", "refresh": "更新 CDN IP 列表", "refreshOk": "已更新 CIDR 列表", "providers": { "none": "无（直连源站）", "cloudflare": "Cloudflare", "fastly": "快速", "bunny": "兔子CDN", "cloudfront": "AWS 云前", "azure_frontdoor": "蔚蓝前门", "gcore": "国核CDN", "custom": "自定义代理" }, "needProvider": "请先选择 CDN 供应商，才可更新 IP 列表。", "spoofWarn": "信任错误的 CIDR 会让客户端伪造 X-Forwarded-For／CDN 标头，假装成真实来源 IP。" }, "linkUp": "向上", "linkDown": "断开", "linkDownDefault": "下线预设路由", "loopbackImmutable": "回环界面不可变更", "operUnknownHint": "核心未回报 UP／DOWN（lo 常见）。界面仍可用。", "persistNmHint": "可持久化代表经 NetworkManager 写入后，重启后设定仍然有效。" }, "nginx": { "pillSites": "{{count}} 站点", "statSites": "站点", "statSslFlag": "SSL 标记", "purgeOk": "已 purge", "projectSitesHint": "项目站点（受管 conf）与独立站点分开列出。改项目 Nginx 请到项目 → 网络。", "purgeCache": "清除 Cache + Reload", "purgeCacheTitle": "清除 Nginx cache 并重新载入？", "purgeCacheDesc": "清除磁盘 cache 并重载 Nginx。线上站点不会中断。", "notInstalled": "Nginx 尚未安装", "listTitle": "站点（{{count}}）", "listDesc": "创建后再按「套用」同步到系统", "createSite": "+ 创建站点", "colServerName": "服务器名称", "colKind": "类型", "kindProxy": "反向代理", "kindStatic": "静态", "kindPhp": "PHP-FPM", "colTarget": "上游／根目录", "colStatus": "状态", "emptyTitle": "暂无站点", "emptyDesc": "用列表右上角「创建站点」新增；创建后再按「套用」", "applyTitle": "写入管理文件并尝试同步到系统 + nginx -t + reload", "applyToSystem": "同步到系统", "createTitle": "创建 Nginx 站点", "createDesc": "创建后需套用", "editTitle": "编辑 Nginx 站点", "editDesc": "保存后需套用", "deleteTitle": "删除站点？", "deleteDesc": "确定删除此站点？", "deleteTitleNamed": "删除站点 {{name}}？", "deleteDescNamed": "从面板移除 {{name}}。已套用到系统的站会一并删受管 conf。", "invalidServerName": "请填写有效主机名称（例如 app.example.com）。", "needUpstream": "反向代理必须填写上游。", "needRoot": "静态与 PHP 站必须填写网站根目录。", "serverNameHint": "server_name，例如 app.example.com", "kindLabel": "站点类型", "upstreamLabel": "上游地址", "upstreamHint": "例如 127.0.0.1:3000 或 http://backend:8080", "rootLabel": "网站根目录", "rootHintPhp": "PHP 项目 document root，例如 /var/www/app/public", "rootHintStatic": "静态文件目录绝对路径", "sslLabel": "启用 SSL 区块", "sslDesc": "生成 listen 443 ssl；证书需于 SSL 页就绪后绑定", "saveThenApply": "保存后按「套用」写入 nginx", "statProjectSites": "项目", "projectListTitle": "项目站点（{{count}}）", "projectListDesc": "由项目 publish／goLive 写入的受管 conf；修改请到项目「网络」。", "colProject": "项目", "colRuntime": "运行时", "colConf": "配置", "confWritten": "已写入", "confMissing": "无路径", "projectEmptyTitle": "尚无项目 Nginx", "projectEmptyDesc": "部署后到项目「网络」发布 Nginx", "preview": "预览", "openProject": "打开项目", "projectPager": "项目站点分页", "prevPage": "上一页", "nextPage": "下一页", "pageOf": "第 {{page}} / {{total}} 页 · 共 {{count}}", "projectConfEmpty": "（配置文件为空）", "projectConfReadFail": "读取项目 conf 失败", "projectPreviewPath": "{{小路}}", "pageDesc": "Nginx 站点", "filterSource": "来源", "sourceAll": "全部", "sourceProject": "项目", "sourceStandalone": "独立", "colSource": "来源", "filterProject": "已按项目筛选", "globalSettings": "全局设置", "siteSettings": "站点设置", "saveApply": "保存并应用", "settingsSaved": "已保存", "setGzip": "压缩包", "setShowVersion": "显示版本号", "setShowVersionDesc": "关 = server_tokens off", "setHttp2": "HTTP/2（SSL）", "setBody": "Body 上限", "setKeepalive": "保活", "setAccessLog": "访问日志", "logOn": "开", "logBuffered": "缓冲", "logOff": "关", "setForceHttps": "强制 HTTPS", "setHsts": "HSTS", "setCfRealIp": "Cloudflare 真实 IP", "setIndexes": "目录列表", "bodyInherit": "跟随全局", "stopSites": "将有 {{n}} 个站点停止回应 HTTP。" }, "notFound": { "title": "找不到页面", "body": "{{path}} 处没有面板页面。", "hint": "未知 URL 不再将您发送至仪表板。", "home": "仪表板" }, "notes": { "agents": { "sessionNotFound": "找不到 session：{{sessionId}}" }, "notFound": "找不到", "needPath": "请指定路径", "needName": "请填写名称", "needHost": "请填写主机", "needDomain": "请填写域名", "needProjectName": "请填写项目名称", "needServerIp": "请指定服务器 IP", "passwordMin8": "密码至少 8 个字符", "invalidPath": "无效路径", "invalidIp": "无效 IP", "invalidIp46": "无效 IPv4／IPv6", "invalidPackageName": "软件包名称无效", "fileMissing": "文件不存在", "notRegularFile": "不是普通文件", "readFailed": "读取失败", "pathResolveFailed": "路径解析失败", "fieldInvalid": "字段 {{field}} 无效：{{value}}", "apt": { "updateIndex": "更新软件包索引" }, "state": { "closed": "已关闭", "active": "运行中" }, "cat": { "security": "安全", "mail": "邮件", "database": "数据库", "runtime": "执行环境" }, "ssh": { "identityNotFound": "找不到 identity", "registrationNotFound": "找不到登记", "keyOkNologin": "Key accepted. Account has no login shell (nologin) — use SFTP. Treated as PASS.", "keyOkSftp": "SSH shell 被拒绝后，SFTP pwd 成功。" }, "cdn": { "siteNotFound": "找不到 CDN 站点", "nodeMissing": "节点不存在", "loopbackOriginRemote": "来源是 127.0.0.1 — 这是该主机，而不是远程边缘。设置可达的源IP或bind_ip。", "originRemoteRewrite": "远程边缘将使用可达源 {{url}} 而不是环回。", "originRemoteUnknown": "来源是环回，并且没有已知的公共/LAN IP 或bind_ip — apply 将拒绝远程边缘，直到设置为止。", "needSshOrFleet": "远程边缘需要出站 SSH 身份（或用户名）或 /agents 队列会话。仅健康 URL 不适用传输。", "probe": { "timeout": "连接超时 {{ms}}ms（{{detail}}）。对端可能被防火墙挡住。", "dns": "DNS 查询失败（{{detail}}）。", "refused": "连接被拒 {{ms}}ms（{{detail}}）。端口未开或单向封锁。", "tls": "TLS 验证失败（{{detail}}）。", "unreach": "主机不可达 {{ms}}ms（{{detail}}）。", "http": "HTTP 探活失败 {{ms}}ms（{{detail}}）。" } }, "backup": { "testUnsaved": "正在测试未保存的表单（尚未写入设置）。", "testIdentity": "ssh (identity) to {{spec}} ok", "sshAuthFailed": "SSH 密钥或密码被拒绝（公钥）。选择出站身份或安装 sshpass。", "remotePathIsFile": "远程路径 {{path}} 是一个文件。使用目录。", "remoteMkdirFailed": "无法创建远程目录：{{detail}}", "sidecarPushed": "还推送了 SQL sidecar {{name}}", "fileNotFound": "找不到备份文件", "resticNoPassword": "restic 已启用但未设置 password", "resticNotInPath": "restic 不在 PATH", "dbEnvUnreadable": "无法读取 .db.env，跳过 SQL 导出。", "dbEnvNoName": ".db.env 没有数据库名称，跳过 SQL 导出。", "targetOutside": "还原目标必须在项目家目录或公开文件根目录之内。", "controlPlaneDryRun": "仅预览 - 没有写任何东西。在面板中，使用“恢复”并确认要写入的短语。", "controlPlaneNeedConfirm": "完全控制平面恢复需要确认短语 RESTORE-CONTROL-PLANE。", "controlPlaneRestartAfter": "恢复成功后重新启动API。", "movedToTrash": "已将 {{name}} 移至回收区。{{days}} 日后永久删除。", "restoreNameExists": "无法还原 {{name}} — 已有同名备份档。", "restoredFromTrash": "已从回收区还原 {{name}}。", "trashEmptied": "已从回收区永久删除 {{n}} 个备份档。", "partialOk": "部分成功 — 略过 {{n}} 个专案" }, "health": { "portListening": "埠 {{port}} 正在监听", "portNotListening": "埠 {{port}} 未在监听", "httpOk": "HTTP 正常 {{status}}", "httpFail": "HTTP 失败：{{detail}}" }, "redis": { "cliMissing": "未安装 redis-cli", "requirepassAlreadySet": "Redis 已有 requirepass — 未覆写。", "requirepassApplied": "已在执行中套用 requirepass", "requirepassApplyFailed": "无法 CONFIG SET requirepass（将靠重启与设定档）", "generatedRequirepass": "已产生 Redis 密码（只显示一次）：{{password}}" }, "nginx": { "reloaded": "nginx 已 reload", "configOk": "Nginx 配置检查通过", "reloadExit": "Nginx reload 结束码={{code}}", "managedDir": "管理配置目录：{{path}}", "includeHint": "在 Nginx 加入：include {{path}}/*.conf;", "removedOrphan": "已删除幽灵 Nginx conf {{path}}", "keptLiveSsl": "保留 {{path}} 的 HTTPS 区块（受管范本没有 listen 443）", "orphanCleanupFailed": "清理幽灵 Nginx conf 失败：{{detail}}", "settingsWritten": "已写入 Nginx 全局 snippet", "settingsNeedExecute": "应用需 YSK_EXECUTE", "reloadFailed": "nginx reload 失败" }, "ssl": { "requestCert": "申请证书" }, "ftp": { "startVsftpd": "启动 vsftpd", "writeVsftpd": "写入 vsftpd 配置", "vsftpdStarted": "vsftpd 已启动", "openPortsStep": "防火墙端口（需手动）", "openPortsReminder": "请在主机防火墙和云安全组放行 TCP：{{ports}}。套用 FTPS 不会代你开端口。", "openPortsPasvHint": "若登录成功但列目录 LIST 超时，多半是 PASV 数据端口被挡——要开齐 PASV 范围，不是只开 21。", "publicPlaintextBlocked": "拒绝在未启用 FTPS 时对外启动 FTP。请改为仅本机监听、选凭证启用 FTPS，或输入 PLAINTEXT 确认后才公开明文服务。" }, "deploy": { "nodeMissingIsolated": "隔离部署找不到 Node：{{path}} — 请先安装 Node {{version}} toolchain 再部署。拒绝写入会 203/EXEC 的 unit。", "nodeMissing": "找不到 Node：{{path}} — 请安装 toolchain（Node {{version}}）再部署", "nodeRejectedPath": "project user 不能执行此 Node 路径：{{path}} — 应使用 {{planned}}", "unitUnhealthy": "systemd unit 不健康（{{detail}}）。journalctl -u {{unit}} — 203/EXEC 多半是 binary 对 project user 无权限", "skippedPanelNode": "已跳过 panel Node {{path}}（project user 无法执行，会导致 systemd 203/EXEC）", "usingFallback": "Node binary：使用 {{path}}（计划路径 {{planned}} 不存在）", "usingPanelExec": "Node binary：回退 panel execPath {{path}}", "usingPanelDegraded": "Node binary：degraded 部署使用 panel {{path}}（不适用于 systemd User=ysks_*）", "nodeNotFoundPlanned": "主机未找到 Node {{version}} — unit 将使用 {{planned}}；请安装 toolchain 再部署" }, "files": { "needSrcDst": "请指定来源与目标路径", "pathOutsideSandbox": "路径超出沙箱范围：{{target}}", "notFoundRel": "找不到：{{relPath}}", "fileNotFoundRel": "找不到文件：{{relPath}}", "notFoundFrom": "找不到：{{fromPath}}", "alreadyExists": "已有同名项目：{{name}}" }, "dns": { "needZoneServerIp": "请填写 zone 与 server IP", "noClusterPeer": "尚未登记集群 peer", "planOnly": "仅计划 — 需 apply=true（root + YSK_EXECUTE）写入 /etc/powerdns 并 rediscover", "needRootNamed": "需要 root + EXECUTE 才能更新 named.conf 并 rediscover", "noManagedZonesClear": "dataDir/dns/zones 无区域文件 — 将清空 PowerDNS YSK include", "bindRegistered": "PowerDNS BIND：已注册 {{count}} 个 zone（list-zones 已确认）", "listZonesIncomplete": "named.conf 已更新但 list-zones 未确认全部 zone — 不标 loaded", "noLaunchDefaultBind": "未找到 launch= — 默认走 bind 路径", "writeNotAnswerDig": "只写 zone 文件不会响应 dig — 需载入 PowerDNS（named.conf + rediscover）", "bindDigFailed": "zone 已列出但 dig SOA 失败 — 不标 loaded", "bindLoadedOk": "Zone {{zone}} 已挂入 PowerDNS BIND 且 dig OK", "bindSyncFailed": "BIND named.conf 同步失败或 dig 无应答", "bindSkipPdnsutil": "跳过 BIND 路径（后端偏好 pdnsutil）", "pdnsCtlNoConfirm": "有 pdns_control 但 zone 未确认；检查 named.conf 或用 pdnsutil 后端", "usingExistingZone": "使用现有 zone 文件：{{path}}", "healNeedRoot": "需要 root + EXECUTE 才能改写 pdns local-address", "pdnsUnitActive": "pdns 单元：active", "pdnsUnitInactive": "pdns 单元：非 active", "udp53Listening": "UDP/53：监听中", "udp53NotListening": "UDP/53：仍未监听", "healResyncOk": "已修复 listener 并重新同步 zone 到 PowerDNS BIND", "healResyncPartial": "listener 已修好但 zone 同步未完 — 请点「写入并加载区域」", "installAfterLoad": "安装后请 apply DNS zones（写 named.conf + rediscover）或 POST powerdns/load", "bindFileNotEnough": "BIND 后端：只写 zone 文件不够，需 named.conf include 才会响应 dig", "zeroDomainsHint": "PowerDNS list-zones: 0 — 磁盘有 zone 文件但未加载", "localAFailed": "本机 A 探测失败（www/ftp/@）zone={{zone}}", "publicNsCloudflare": "公网 NS 是第三方 DNS/CDN（例如 Cloudflare）— 公网 dig 不会用本机 zone", "publicNsOther": "公网 NS 不是本机 — 全球查询会忽略本机 PowerDNS，直到改注册商 NS", "publicNsHere": "公网 NS 似 in-zone（ns1/ns2.zone）— 外网可能查询你", "firewall53Hint": "ss 看不到 UDP/53 — 若外网 dig 失败请开放防火墙 53 both（TCP+UDP）", "applyDigOk": "PowerDNS BIND：list-zones + dig OK", "applyDigFail": "conf 已注册但 dig 仍空/REFUSED — 不标 applied", "applySyncIncomplete": "PowerDNS bind 同步未完 — 仅写盘。请检查 EXECUTE/root 或 pdns 日志", "writeOnlyHint": "仅写了 zone 文件 — 需 load/apply 挂 named.conf 才会应答", "noActiveUnit": "没有运行中的 named／bind9／pdns 单元", "pdnsUnitRestarts": "pdns 单元状态／重启次数：{{detail}}", "port53LoopbackOnly": "53 埠只绑在 loopback（systemd-resolved 127.0.0.53）— 不是产品权威 nameserver", "port53Closed": "53 埠未在听（UDP／TCP）", "udp53NotPublic": "UDP/53 未绑公网位址", "tcp53NotPublic": "TCP/53 未绑公网位址", "noManagedZones": "dataDir/dns/zones 没有管理中的 zone 档", "pdnsListZones": "PowerDNS list-zones：{{n}}", "lookupIgnoredAt": "dig 不可用 — 已忽略 @{{server}}。不会把系统 resolver 当成该服务器的答案。", "digNotInstalled": "dig 未安装", "digEmpty": "dig 无答案", "localAOk": "本机 A {{name}} → {{ip}}" }, "db": { "needExecuteCreate": "服务器未开启系统变更权限，无法在管理面板创建数据库", "dryRunMysql": "dry-run：未创建数据库。加 --execute 且 YSK_EXECUTE=1 才真正 provision", "remoteNoCreds": "未存账号／密码——只测 TCP（登记 ≠ 已登录）。", "remoteReachable": "TCP {{host}}:{{port}} 可达（{{ms}}ms）。", "remoteUnreachable": "TCP {{host}}:{{port}} 关闭或被过滤（{{ms}}ms）。" }, "net": { "invalidIface": "接口名称无效", "invalidDev": "dev 名称无效", "needNmActive": "无法持久化：需要 NetworkManager 活动连接" }, "project": { "notFound": "找不到项目：{{id}}", "docRootMustBeRelative": "文档根必须为相对路径（相对于项目家目录），不可用绝对路径。", "docRootInvalid": "文档根路径无效（不可含 .. 或非法字符）。", "domainInvalid": "域名格式无效：{{domain}}", "domainInUse": "域名 {{domain}} 已被项目「{{other}}」使用。" }, "email": { "domainNotFound": "找不到邮件域名：{{id}}", "wroteNginx": "已写入 Nginx 配置：{{nginxPath}}", "wrotePath": "已写入 {{path}}", "domainDeleted": "已删除域名 {{domain}}（邮箱 {{mailboxes}}、别名 {{aliases}}）", "domainDataDirRemoved": "已移除本机数据目录 {{path}}", "domainDataDirRemoveFailed": "无法移除数据目录 {{path}}：{{detail}}", "domainDeleteSystemHint": "控制面已删除；系统 MTA 映射若仍存在请重新应用其余域名或手动清理", "mailboxDeleted": "已删除邮箱 {{address}}", "mailboxNotFound": "找不到邮箱", "mailboxDataRemoved": "已移除本机目录 {{path}}", "domainDeleteConfirmMismatch": "确认字符串与域名不符，已拒绝删除", "domainDataKept": "已保留本机 dataDir 邮件数据（removeData=false）", "mailboxPasswordUpdated": "已更新 {{address}} 的密码", "mailboxStatusUpdated": "已将 {{address}} 状态设为 {{status}}", "mailboxUpdateEmpty": "没有可更新项 — 请提供密码和/或状态", "mailboxStatusInvalid": "无效的邮箱状态", "mailboxNoChanges": "没有变更", "dovecotApplyNeedRoot": "套用 Dovecot 虚拟邮箱认证需要 root + YSK_EXECUTE", "dovecotNotInstalled": "本机未安装 Dovecot", "dovecotNoPassdbSnippets": "dataDir/email 下找不到域名 passdb snippet", "dovecotApplyFailed": "套用 Dovecot 虚拟邮箱认证失败：{{detail}}", "dovecotApplyOk": "已安装 Dovecot 虚拟邮箱认证（{{conf}}，{{count}} 个域名）", "dovecotPassdbWrittenNeedApply": "已写入 passwd-file（dataDir）— 需 EXECUTE+root 套用到 Dovecot 才可登录", "postqueueSetgidBroken": "Postfix 队列工具失败：main.cf 中 setgid_group 为空。应设为 postdrop（有 YSK_EXECUTE 时面板会尝试自动修复）。", "postqueueMailDown": "Postfix 未运行（showq 不可用）。有 YSK_EXECUTE 时面板会尝试启动 — 请检查软件分页或 systemctl status postfix。", "postqueueSpoolMissing": "Postfix 队列目录缺失（例如 hold/）。有 YSK_EXECUTE 时面板会尝试创建 spool 并启动 Postfix。", "invalidDomain": "请输入有效邮件域名", "invalidServerIp": "请输入有效服务器 IP", "mailboxLocalPartInvalid": "邮箱本机部分只可用英文字母、数字与 . _ + -", "passwordTooShort": "密码至少 8 个字元" }, "software": { "startUnit": "启动 {{u}}", "installedSpec": "已安装 {{title}}", "installPkg": "安装 {{p}}", "npmGlobal": "npm install -g {{pkgs}}", "needNodeForNpm": "未找到 node／npm — 请先安装 Node.js 再安装 {{title}}", "uninstallNoTargets": "未选择要卸载的软件", "uninstallNothingInstalled": "所选范围内没有已安装项目", "uninstallProtected": "已跳过受保护组件：{{ids}}", "uninstallConfirmMismatch": "确认短语不匹配", "uninstallOk": "已卸载 {{n}} 个组件", "uninstallPartial": "卸载完成但有错误 — 请查看步骤" }, "php": { "aptPackages": "将安装 {{count}} 个软件包：{{list}}" }, "runtime": { "plugins": "一并安装工具：{{list}}", "pluginsOk": "选定工具已安装", "pluginsFailed": "部分工具安装失败或跳过：{{list}}", "pluginsUninstall": "卸载工具：{{list}}", "pluginsUninstallOk": "选定工具已卸载", "pluginsUninstallFailed": "部分工具卸载失败或跳过：{{list}}", "pluginsNoneToUninstall": "没有可卸载的工具（可能已移除或属必装）" }, "approval": { "notFound": "找不到审批：{{id}}" }, "readiness": { "core": "控制面", "security": "安全", "binaries": "二进制／软件包", "hosting": "托管", "dns": "域名系统", "email": "邮件", "isolation": "项目隔离", "ops": "运维", "runtimesNode": "Node.js", "runtimesPhp": "PHP", "runtimesPython": "Python", "runtimesGo": "Go", "pm2": "PM2", "runtimesNodeFix": "从 /runtimes/node 安装 Node", "runtimesPhpFix": "从 /runtimes/php 安装 PHP", "runtimesPythonFix": "从 /runtimes/python 安装 Python", "runtimesGoFix": "从 /runtimes/go 安装 Go", "pm2Fix": "从 Node 运行时页面安装 PM2" }, "needAdmin": "需要管理员权限", "notInstalled": "未安装", "unknown": "未知", "failed": "失败", "running": "运行中", "stopped": "已停止", "probe": "探测", "install": "安装", "port": "端口", "git": { "missingBin": "git 不在路径上", "auth": "认证失败。添加部署密钥或 HTTPS 令牌。", "hostkey": "SSH 主机密钥验证失败。确认并固定主机密钥。", "dirty": "工作树有 {{count}} 个本地更改。拉动被阻止。", "diverged": "无法快进。如果您打算丢弃本地 Git 历史记录，请重置为远程引用。", "missingRef": "该分支、标签或提交不在远程上。", "shallow": "这个克隆很浅。在固定旧提交之前获取完整历史记录。", "notRepo": "app/ 还不是 Git 存储库。", "diffEmpty": "没有未暂存的差异（受保护的 .env 被排除）。", "unrelated": "无关的历史。仅在确认后重新克隆 - 自定义文件将丢失。", "lock": "Git index.lock 存在。仅当没有 git 进程正在运行时才将其删除。", "disk": "磁盘已满或超出配额。", "timeout": "Git 超时。", "network": "与远程通信时出现网络错误。", "lfs": "此存储库使用 Git LFS 并且 git-lfs 不可用。", "submodule": "子模块更新失败。", "unknown": "吉特失败了。查看命令输出。", "fetchOk": "从原产地获取。", "checkoutOk": "签出{{ref}}。", "resetOk": "硬重置为{{ref}}。", "envRestored": "从控制平面恢复了 app/.env。", "needPinHost": "SSH 主机密钥未固定。在克隆或获取之前扫描并固定它。", "tokenSaved": "已存储 HTTPS 令牌（不再显示）。", "tokenCleared": "HTTPS 令牌已删除。", "tokenInvalid": "令牌必须至少包含 8 个字符。", "deployKeyCreated": "已创建部署密钥。在 Git 主机上添加公钥。", "deployKeyCleared": "部署与该项目分离的密钥。", "hostPinned": "{{host}} 的固定 SSH 主机密钥。", "hostUnpinned": "清除固定的 SSH 主机密钥。", "hostScanFailed": "ssh-keyscan 没有返回该主机的密钥。", "hookEnabled": "入站 Git 挂钩已打开。自行将 URL 粘贴到 GitHub、Gitea 或 GitLab 中。", "hookDisabled": "入站 Git 挂钩已关闭。 URL 将不会同步。", "hookSecretOnce": "现在复制这个钩子秘密。它不再显示。", "refsNeedUrl": "首先输入 Git URL。", "refsOk": "已加载 {{branches}} 分支和 {{tags}} 标签。", "refsEmpty": "远程没有发布任何分支或标签。" }, "auto": { "n0001": "状态：applied", "n0002": "找不到用户", "n0003": "blocked: 需要 YSK_EXECUTE=1", "n0004": "找不到資源", "n0005": "无法应用系統：需 YSK_EXECUTE + root", "n0006": "需要系統变更权限", "n0007": "状态：written", "n0008": "需要系統管理员（root）权限才能完成", "n0009": "创建账户数据库", "n0010": "完成", "n0011": "找不到账户", "n0012": "状态：failed", "n0013": "未运行", "n0014": "启动中", "n0015": "未安装 mysql 客戶端", "n0016": "未安装 psql", "n0017": "UFW 防火墙", "n0018": "运行环境", "n0019": "找不到 cron 工作", "n0020": "已匯入", "n0021": "以 root 执行", "n0022": "管理员双重验证", "n0023": "错误日誌路径", "n0024": "找不到站点", "n0025": "系统变更未开启", "n0026": "自动 ban 已熔断", "n0027": "請指定 agentId", "n0028": "找不到项目", "n0029": "需要 name", "n0030": "緊急", "n0031": "自動 ban 未开启", "n0032": "dry-run：此計劃未改系統", "n0033": "dry-run：未改系統", "n0034": "建議至少 1 個 replica", "n0035": "無节点 probe 成功", "n0036": "服务器未开启系統变更权限，无法 rsync", "n0037": "reapply 關鍵步驟失败", "n0038": "无法 bootstrap：未开启 YSK_EXECUTE", "n0039": "bootstrap 需要 YSK_EXECUTE=1", "n0040": "最大连接數", "n0041": "綁定位址", "n0042": "站点無域名", "n0043": "略過 draining", "n0044": "找不到 CDN 节点", "n0045": "每日（GitHub Releases latest）", "n0046": "execute 模式（仍需 YSK_EXECUTE 才能寫系統目录）", "n0047": "dry-run 默认：加 --execute 先同步到系統 nginx", "n0048": "需要管理员", "n0049": "projectId 與 name 必填", "n0050": " ^.*账号或密码不正確.*$", "n0051": " ^.*需要有效的双重验证碼.*$", "n0052": " echo \"pdnsutil 找不到\" >&2", "n0053": " : ''}（重開可能消失；要持久請用「保存」）", "n0054": "# rsa_cert_file= (尚未选择有效证书)", "n0055": "$_GET / $_POST / $_COOKIE 變數上限", "n0056": "--password 需值，或設 YSK_MIGRATE_SSH_PASSWORD", "n0057": "-1 关闭；0 全部记录", "n0058": "/proc/meminfo 不可讀", "n0059": "/proc/stat 不可讀 — CPU% 无法計算", "n0060": "0 = 不限制；可設 256mb", "n0061": "0 = 使用全部 CPU", "n0062": "0（关闭）", "n0063": "1 分钟 load 超过 CPU×2", "n0064": "1. 於面板创建 MySQL 数据库", "n0065": "1=最安全；2=效能較佳", "n0066": "2. 下载 WordPress 到 app/public", "n0067": "3. 设置 wp-config.php", "n0068": "4. 部署 PHP + 發布 Nginx／SSL", "n0069": "A 记录值必須是 IPv4", "n0070": "A 记录必須是 IPv4", "n0071": "AAAA 记录值必須是 IPv6", "n0072": "AAAA 记录必須是 IPv6", "n0073": "AOF 持久化", "n0074": "Adminer 文件不存在；請 download:true", "n0075": "Agent 无法在全域範圍执行高風險写入", "n0076": "Agent 运行時", "n0077": "Allowlist 工具清單", "n0078": "Axum + Tokio；需 cargo build 下载 crates（需外網）", "n0079": "Axum 範本：cargo build --release 需外網 crates.io", "n0080": "Binlog 保留（天）", "n0081": "Binlog 保留（秒）", "n0082": "Binlog 格式", "n0083": "Bootstrap 第一個节点（僅一次）", "n0084": "Bot 扫描", "n0085": "CLI 啟用 OPcache", "n0086": "CONFIG SET databases 未成功（可能需重啟後生效）", "n0087": "CPU 配額須為 1–10000", "n0088": "Cloudflare UA 未成功", "n0089": "Cloudflare Under Attack 已請求", "n0090": "Cookie Secure（僅 HTTPS）", "n0091": "DB index 必須為 0–15", "n0092": "DB 標記已隔離但 home 目录不存在", "n0093": "DB 標記已隔離但 id 找不到用户 — 請重新创建系統用户", "n0094": "DB_PASSWORD 為空 — 請在資源頁创建 MySQL 後填入或設 WP_DB_* 環境變數", "n0095": "DDoS 啟發式", "n0096": "DKIM 公鑰", "n0097": "DMARC 政策", "n0098": "DNS written ≠ 公網 resolver 立即生效（受 TTL／上游快取影響）", "n0099": "DS 在 registrar 發佈前，請勿宣稱已上線。", "n0100": "Django 骨架：部署時 pip install django/gunicorn", "n0101": "Down 需 confirmName 等於接口名", "n0102": "EmailService 無 dataDir — 只寫数据库（需 dataDir 才建 Maildir）", "n0103": "FPM 重载失败", "n0104": "FTPS 需要域名", "n0105": "FastAPI + uvicorn；requirements.txt；/ 與 /health", "n0106": "Flask 最小 app.py；requirements.txt；/ 與 /health", "n0107": "GTID 模式：兩邊 conf 已開 gtid_mode=ON", "n0108": "Galera 僅支援 mariadb 引擎", "n0109": "Git URL 无效", "n0110": "GitHub package.json 缺少 version", "n0111": "GitHub release 缺少 tag", "n0112": "Go 运行时", "n0113": "Go 多版本", "n0114": "HTTP conf with ACME webroot（尚未掛 TLS）", "n0115": "HTTP 基本認證失败", "n0116": "HTTPS 站点建議开启", "n0117": "IMAP／POP 登入失败", "n0118": "IP 准入政策未啟用（只影響查詢／enrich）", "n0119": "IP 无效", "n0120": "IPv4 前綴須 0–32", "n0121": "IPv6 前綴須 0–128", "n0122": "InnoDB 提交刷盤", "n0123": "InnoDB 日志檔大小", "n0124": "InnoDB 緩衝池", "n0125": "Install and publish via admin panel (Webmail 安装).", "n0126": "L7 爆量／异常流量", "n0127": "LLM 回應格式异常（缺少安全標記）", "n0128": "Let’s Encrypt HTTP-01 需要 80 可達；DNS-01 則需 API token。", "n0129": "LimitNOFILE 須為 64–10000000", "n0130": "MTU 須在 68–65535", "n0131": "MX 指向邮件主機名", "n0132": "MX 格式：優先級 主機（例如 10 mail.example.com.）", "n0133": "MariaDB 服务器", "n0134": "MariaDB 特有：one-thread-per-connection / pool-of-threads", "n0135": "MySQL 服务器", "n0136": "MySQL/MariaDB 客户端", "n0137": "NetworkManager 不可用，无法写入 DNS", "n0138": "Nginx 收緊限速（約 8 req/s）", "n0139": "Nginx 極嚴限速（約 3 req/s）", "n0140": "Nginx 溫和限速（約 20 req/s）", "n0141": "Node 多版本", "n0142": "Node 安装失败", "n0143": "Node.js 起步", "n0144": "OPcache 内存（MB）", "n0145": "PHP docroot + wp-config 範例（核心需另下载）", "n0146": "PHP 多版本", "n0147": "PHP 进程启动後未取得进程編號", "n0148": "PHP 隔離 degraded — 未以项目 Linux 用户（需 root + 创建系統用户）", "n0149": "PID 必須為正整數", "n0150": "PID 无效", "n0151": "PING 成功", "n0152": "PM2 启动失败 — 改用 pidfile 启动", "n0153": "PM2 进程管理", "n0154": "POST 體積上限", "n0155": "Per-sender：依 envelope sender domain 計 msgs/hour；超限 DEFER_IF_PERMIT", "n0156": "Postfix suspend map 已应用（check_recipient_access REJECT）", "n0157": "PostgreSQL 服务器", "n0158": "PostgreSQL 服务器尚未安装", "n0159": "PostgreSQL 客户端", "n0160": "PostgreSQL 服务未运行", "n0161": "PowerDNS 工具", "n0162": "Primary：创建 replication 用户（SQL 腳本）", "n0163": "Python Django（骨架）", "n0164": "Python 多版本", "n0165": "Python 行为", "n0166": "RDB 快照规则", "n0167": "RDB 檔名", "n0168": "RUSTFLAGS（构建）", "n0169": "Redis dbIndex 須為 0–15", "n0170": "Redis dump 需要 YSK_EXECUTE=1", "n0171": "Redis 服务器", "n0172": "Redis 服务器尚未安装或无法连接", "n0173": "Redis 启动後仍无法 PING", "n0174": "Redis 客户端", "n0175": "Redis 已启动", "n0176": "Redis 还原需要 YSK_EXECUTE", "n0177": "Renewal via certbot.timer（dns-01 續期需自動化插件）", "n0178": "Rust 构建／运行", "n0179": "S3 bucket/path 未设置", "n0180": "SFTP .ssh chown 需 root + YSK_EXECUTE", "n0181": "SIGKILL 需 confirmKill: true", "n0182": "SMTP 濫用／暴力", "n0183": "SPF 政策", "n0184": "SRV 建議格式：priority weight port target", "n0185": "SSH 暴力破解", "n0186": "SSH 连接失败", "n0187": "SSH 需要 YSK_EXECUTE=1", "n0188": "SSO 已验证（單次）· 含自動登入密码", "n0189": "SSO 已验证（單次）· 無密码", "n0190": "SST=mariabackup：各节点需 mariadb-backup", "n0191": "Session 保存方式", "n0192": "Session 嚴格模式", "n0193": "Session 存活秒數", "n0194": "TCP 連接 (inuse)", "n0195": "TOTP 确认成功", "n0196": "TasksMax 須為 1–1000000", "n0197": "UFW 未安装", "n0198": "UFW 状态读取失败", "n0199": "VACUUM 工作程序數", "n0200": "WAL 等級", "n0201": "Web + 邮件", "n0202": "Web UI: 找不到 (build apps/web or set YSK_WEB_ROOT)\\n", "n0203": "Web 主機", "n0204": "Web 接口建置", "n0205": "WebAuthn 註冊验证失败", "n0206": "WebDAV 未啟用", "n0207": "Webmail 域名无效", "n0208": "Wildcard／dns-01：certbot 需手動 TXT；面板會启动流程但 DS/TXT 需於 DNS 提供商完成", "n0209": "WordPress（PHP 骨架）", "n0210": "YSK PHP OK — WordPress 尚未安装\\\\n", "n0211": "YSK_EXECUTE 已开但进程非 root — 部分 systemctl／nginx reload 会被 blocked", "n0212": "YSK_EXECUTE 已开启", "n0213": "YSK_EXECUTE 未开 — written ≠ applied", "n0214": "YSK_EXECUTE 未开 — 应用到系统的操作会被 blocked", "n0215": "access log 解析失败", "n0216": "access=fleet 需要 fleetAgentId", "n0217": "action 須為 reboot | poweroff | cancel", "n0218": "apex + www（多 edge 預留）+ cdn 主機名佔位", "n0219": "apex CNAME 在多數授權服务器不建議／不相容", "n0220": "app.py 已存在 — 已略過", "n0221": "applied ≠ healthy — 請跑 probe 确认 wsrep", "n0222": "apply 後需 reload sshd；错误 Match 可能鎖死 — 先 dry-run", "n0223": "applySystem 已傳但本次無 suspend/autoreply 变更", "n0224": "apply_status=written（控制面成功 ≠ 系統 MTA 已生效；加 applySystem:true 先应用）", "n0225": "apps/web/dist 已存在", "n0226": "apt list --upgradable：無輸出（可能無更新或 apt 未就绪）", "n0227": "apt 安装失败", "n0228": "apt-get 可用", "n0229": "auto vacuum 关闭", "n0230": "blocked: 需要 HostExecutor + YSK_EXECUTE=1", "n0231": "bootstrap 中止：Node 失败", "n0232": "bootstrap 中止：apt 失败", "n0233": "bootstrap 關鍵步驟失败", "n0234": "candidateVersion 含非法字符", "n0235": "cargo 可执行檔", "n0236": "certbot exit 0 — 检查 /etc/letsencrypt/live/", "n0237": "chown 需要 YSK_EXECUTE + root", "n0238": "clone 前已清除佔位應用檔（YSK scaffold / stub）", "n0239": "cluster_size 未知或 0", "n0240": "command 含 ysk-server / ysk-server 特徵", "n0241": "control plane 文件不完整", "n0242": "cwd 不可讀", "n0243": "dataDir 不存在", "n0244": "dataDir 缺 ysk.json — 控制面状态不完整", "n0245": "dataDir/email 已存在", "n0246": "dataDir/web 已存在", "n0247": "database 找不到", "n0248": "db-util（FTP 账户库）", "n0249": "deployNode 只適用於 Node 项目", "n0250": "df 無可用 mount（或全被過濾）", "n0251": "dig 不可用，改用 node dns", "n0252": "dig 無答案（NXDOMAIN 或空）", "n0253": "dns-01：面板唔代填公網 TXT — 完成後再「分發 SSL」", "n0254": "dnssec-dsfromkey 未能產生 DS", "n0255": "dnssec-keygen 不在 PATH（apt install bind9-dnsutils）", "n0256": "dnssec-keygen 失败", "n0257": "dnssec-signzone 不可用 — 只保留密钥／DS", "n0258": "dnssec-signzone 未產生 .signed 檔", "n0259": "domain 必填", "n0260": "domain 找不到", "n0261": "dovecot reload 失败或服务未裝（sieve 檔已寫；唔標假 reload 成功）", "n0262": "预览试行机群派送（未入队列）", "n0263": "dry-run peer push 計劃（未 scp）", "n0264": "dry-run remote install（未 ssh）", "n0265": "dry-run transfer 完成（略過 full bootstrap）", "n0266": "dry-run — pass apply/execute 才寫 home 檔", "n0267": "dry-run — pass apply/execute 才真正 ssh", "n0268": "dry-run — 未写入 /etc", "n0269": "dry-run 默认：加 --execute 先应用 ufw", "n0270": "dry-run：inventory + preflight 通过，未 package/transfer", "n0271": "dry-run：僅探测／計劃。加 --execute 且 YSK_EXECUTE=1 先真正 provision", "n0272": "dry-run：已写入管理檔（dataDir）。加 execute + YSK_EXECUTE=1 + root 先裝系統 drop-in", "n0273": "dry-run：未封禁。加 --execute 且 YSK_EXECUTE=1 先真正 ban", "n0274": "dry-run：未解封。加 --execute 且 YSK_EXECUTE=1 先真正 unban", "n0275": "dryRun=true — 不實際变更 API", "n0276": "dryRun：未写入磁盘", "n0277": "dump 已写入 dataDir，尚未 transfer", "n0278": "enable 失败", "n0279": "execute 模式（仍需 YSK_EXECUTE=1 + root）", "n0280": "execute 需要 enqueue 回調", "n0281": "export 僅限 admin", "n0282": "fail2ban 应用指令失败", "n0283": "fail2ban 服务", "n0284": "fail2ban 未 active", "n0285": "fail2ban 未在跑", "n0286": "fail2ban 活躍封禁", "n0287": "fail2ban 状态读取失败", "n0288": "fail2ban：sshd、nginx-http-auth 等標準 jail", "n0289": "fd 計數不可用", "n0290": "files（文件）", "n0291": "fleet purge blocked — 需 enqueue 或 SSH", "n0292": "fleet 成員請用 db-cluster fleet --op probe --execute", "n0293": "fromPanel 僅限 admin", "n0294": "fromPanel 需要先 step-up：POST /api/v1/auth/totp/step-up", "n0295": "fullchain 必須是 PEM 证书", "n0296": "gateway 須為純 IP", "n0297": "geo apex：無 EDNS 時写入所有 geo 健康 edge 的 multi-A（唔係真·用户就近 Anycast）", "n0298": "geoMap 內無健康 edge — 回退全部健康 edge", "n0299": "geo：未设置 geoMap — 等同 multi_a（全部健康 edge）。請在站点 dns.geoMap 填 region→nodeIds", "n0300": "git binary 找不到 on PATH", "n0301": "git 可执行檔", "n0302": "go 可执行檔", "n0303": "healthUrl 必須是 http(s) URL", "n0304": "http-01 webroot — 需 80 端口可達且 ACME conf 已 fan-out", "n0305": "identity 未綁定 linuxUser/project — 无法寫 authorized_keys", "n0306": "ignoreip 來源：dataDir/fail2ban/ignoreip.txt", "n0307": "index.html + CSS，供 Nginx root 或靜態部署", "n0308": "install conf → systemctl restart mariadb（非 bootstrap 节点）", "n0309": "ip -j addr 無接口", "n0310": "job 無 manifest", "n0311": "journal 來源；實際可讀性視权限", "n0312": "journalctl 可能需要 root 或使用者在 systemd-journal／adm 組", "n0313": "key 不存在", "n0314": "key 不存在或未删除", "n0315": "kill -0 仍成功：進程可能為 zombie 或权限不足", "n0316": "kill -0 失败", "n0317": "last_apply applied 但 blocked", "n0318": "last_apply 同時 ok=true 與 blocked（不誠實）", "n0319": "local cache 目录空／新建", "n0320": "localhost 或 *", "n0321": "logical DB 0 … N-1；改後需重啟", "n0322": "logrotate 已安装", "n0323": "logrotate 未安装或不在 PATH", "n0324": "main.py 已存在 — 已略過", "n0325": "manage.py + minimal settings/urls/wsgi；需 pip install django", "n0326": "manifest 無 dumpRelPath — 未打包？", "n0327": "manifest 無 rdbRelPath", "n0328": "memoryMax 格式須如 512M 或 1G", "n0329": "migrate host 需 --execute + YSK_EXECUTE=1，或 --dry-run（僅 inventory+preflight）", "n0330": "migrate post 需 --execute 且 YSK_EXECUTE=1（在目標機执行）", "n0331": "migrate post 需要 YSK_EXECUTE=1", "n0332": "migrate post 需要 YSK_EXECUTE=1（應在目標機执行）", "n0333": "minimal bootstrap 失败", "n0334": "mysql 用户端", "n0335": "mysql-replica 僅支援 mysql 引擎", "n0336": "mysql_databases 列缺 name", "n0337": "named-checkzone 不在 PATH — 檔已写入，語法未验证", "n0338": "nginx -t 或 reload 失败", "n0339": "nginx -t 未通过，未重载", "n0340": "nginx reload ok · 状态：applied", "n0341": "nginx reload 失败", "n0342": "nginx 可执行檔", "n0343": "nginx 执行層已关闭（enforce.nginx=false）", "n0344": "nginx 服务", "n0345": "nice 須在 -20（最高優先）至 19（最低）", "n0346": "node 可执行檔", "n0347": "npm latest 缺少版本信息", "n0348": "npm 指令 exit 0 但仍找不到 binary — 软件包可能未提供 CLI 或 PATH 未更新", "n0349": "nullok 避免未寫檔用户被鎖", "n0350": "nullok：無 .google_authenticator 的用户仍可用 key 登入", "n0351": "open_basedir 路径限制", "n0352": "openssl 不可用，改用 YSK-SCRYPT 雜湊", "n0353": "openssl（信箱雜湊）", "n0354": "optionalEtc 失败不中止 transfer（可於目標重簽证书）", "n0355": "origin shield：此节点為 shield，直接連 origin", "n0356": "origin.kind 必須是 project 或 url", "n0357": "origin.project 需要 projectId", "n0358": "origin.url 必須是 http(s) URL", "n0359": "originShieldNodeId 必須在 edgeNodeIds 內", "n0360": "package dump 未完成 — 禁止 transfer", "n0361": "package 失败 — 不得進入 transfer", "n0362": "package 需要 YSK_EXECUTE=1", "n0363": "pam.d/sshd 尚未引用 pam_google_authenticator（檔寫了也未 enforce）", "n0364": "panel 尚未设置 2FA 或无 secret — 请先在「我的安全」启用 TOTP", "n0365": "panel 無 TOTP secret — 先在 Web 啟用 2FA 或勿用 --from-panel", "n0366": "panel 需把 login 失败写入可被 fail2ban 讀的 log（journal 或檔）", "n0367": "passkey 已登记", "n0368": "passkey 验证失败", "n0369": "passkey 验证成功", "n0370": "pdnsutil 找不到 — install PowerDNS tools or run helper script as root after install", "n0371": "peer SSH probe 需 YSK_EXECUTE=1（已只做本機）", "n0372": "peer 未探测（只 probe 本機）", "n0373": "peer 节点仍需各自应用 conf 並 join", "n0374": "php binary 找不到 — install php-cli", "n0375": "php 可执行檔", "n0376": "php 未在 PATH", "n0377": "pidfile 以控制面用户启动（degraded）", "n0378": "pidfile 启动未取得 pid", "n0379": "pm2 不在 PATH（仍可用 pidfile／systemd）", "n0380": "pm2 找不到 on PATH — install: npm i -g pm2", "n0381": "post-transfer 停在 reapply", "n0382": "post-transfer 停在 restore", "n0383": "postconf 未能确认 message_rate_limit（唔當完整 applied）", "n0384": "postgres-replica 僅支援 postgres", "n0385": "postgres_databases 列缺 name", "n0386": "postqueue 不可用或邮件堆疊未安装", "n0387": "preflight 失败", "n0388": "primary 無 binlog / MASTER STATUS 空", "n0389": "privkey 必須是 PEM 私鑰", "n0390": "productionReady 未達標（資料可能已齊）", "n0391": "ps 輸出無進程列", "n0392": "ps 降级：無 --sort／精簡字段", "n0393": "ps 降级：無 pri/vsz/stat 等欄", "n0394": "psql 用户端", "n0395": "purge 全部失败或無目標", "n0396": "python3 可执行檔", "n0397": "queued ≠ edge 已 purge", "n0398": "queued ≠ edge 已 reload — agent 需拉取並执行 cdn.edge.apply", "n0399": "queued ≠ edge 已执行 — Agents 纪录看 exit/JSON", "n0400": "realpath 快取大小", "n0401": "realpath 快取秒數", "n0402": "reapply 需要 YSK_EXECUTE=1", "n0403": "redis 集群僅支援 redis", "n0404": "registry shasum 非 sha256（npm 常用 sha1）— 以 npm integrity 為準", "n0405": "reload/restart 失败", "n0406": "remote post 失败 — 可於目標機手動 migrate post", "n0407": "restic 增量备份完成（written/applied 視 restic exit）", "n0408": "restic 已啟用但未设置 password — 拒绝使用內建默认密码（請在备份设置填寫）", "n0409": "restic 未啟用", "n0410": "restic 未啟用 — 无法列出 snapshots", "n0411": "restic 未啟用 — 請先在「遠端／排除」开启並设置 password", "n0412": "restic 未启用（仅 tar）", "n0413": "restic 未啟用（略過增量）", "n0414": "restic 未安装（不在 PATH），請於系統安装 restic 後再試", "n0415": "restore ok；略過 reapply/verify", "n0416": "restore 完成", "n0417": "restore 有失败項", "n0418": "restore 未完全成功", "n0419": "restore 需要 YSK_EXECUTE=1", "n0420": "restore+reapply ok；略過 verify", "n0421": "rsync dataDir 失败", "n0422": "rsync 需要 YSK_EXECUTE=1", "n0423": "scp 已写入但无法 reload：遠端無 rndc/named/bind9/pdns", "n0424": "scp 成功 ≠ peer 已 restart / 已 join", "n0425": "secrets key 可用", "n0426": "secrets master key 存在", "n0427": "sentinel 模式但未登记 sentinel 角色成員", "n0428": "sentinel：INFO replication 僅作參考；請查 sentinel masters", "n0429": "server IP 必須是 IPv4", "n0430": "server IPv6 无效", "n0431": "setquota 不在 PATH — 僅控制面軟配額（deploy 前 du 擋）", "n0432": "shell 路径无效", "n0433": "signal 必須為 TERM | KILL | HUP | USR1", "n0434": "ssh true 成功 → verified", "n0435": "sshd keyboard-interactive / challenge-response 似已开启", "n0436": "sshd 可能未開 KbdInteractiveAuthentication — TOTP 无法在 SSH 提示", "n0437": "sshpass 可用（密码登入）", "n0438": "strict Match 僅針對已寫檔用户（password off）", "n0439": "symlink 指向敏感路径", "n0440": "symlink 逃出 log 目录", "n0441": "symlink 逃出项目 home", "n0442": "systemctl 指令失败", "n0443": "systemd 啟用失败 — 改試 PM2／pidfile", "n0444": "systemd 啟用未能执行：需要系統变更权限與管理员", "n0445": "target 格式：user@host 或 user@host:port", "n0446": "token 已使用", "n0447": "token 已過期", "n0448": "top -b 不可用（進程表仍以 ps 為準）", "n0449": "transfer 中止：dataDir rsync 失败", "n0450": "transfer 中止：无法创建遠端目录", "n0451": "transfer 完成（略過 full bootstrap）", "n0452": "transfer 已完成，但目標 restore/reapply/verify 失败", "n0453": "transfer 有失败項", "n0454": "transfer 校驗失败", "n0455": "transfer 需要 YSK_EXECUTE=1", "n0456": "transfer/bootstrap 失败", "n0457": "ufw 指令执行失败", "n0458": "unit 與 action 必填", "n0459": "useradd 需要 YSK_EXECUTE + root", "n0460": "value 過大（上限 256KB）", "n0461": "verify 有關鍵不一致", "n0462": "verify 未通过 — 不得視為遷移完成", "n0463": "verify 通过 — job=done", "n0464": "vsftpd 启动失败", "n0465": "vsftpd 未能成功启动", "n0466": "weighted: 無 edge", "n0467": "wp-config.php 已存在 — 已略過", "n0468": "written ≠ Dovecot Pigeonhole 已加载 — 需 ManageSieve 或 symlink 到 user sieve", "n0469": "written ≠ Roundcube 已加载 — 用 enableSystem 或手動 symlink", "n0470": "已写入不等于已套用：需同步到系统 conf.d，并通过 nginx 检查后重新加载", "n0471": "written ≠ 公開可連 — 需 reverse proxy 到面板 /webdav", "n0472": "written ≠ 線上进程已重载", "n0473": "ysk-server CLI 安装失败 — 可稍後手動 npm i -g ysk-server", "n0474": "ysk-web 群組供 Nginx/www-data 讀靜態（非 world-readable）", "n0475": "ysk-web 群組需 YSK_EXECUTE + root（靜態 Nginx 可能无法讀 750 home）", "n0476": "ysk.json fingerprint 已變（可能 reapply 寫回）local≠source", "n0477": "ysk.json fingerprint 與來源一致", "n0478": "ysk.json fingerprint 與來源不同（若只清了 bind_ip 屬預期）", "n0479": "ysk.json 存在", "n0480": "ysk.json 校驗失败", "n0481": "zone apply blocked（無 EXECUTE）— 记录已更新於控制面", "n0482": "zone rectify 完成", "n0483": "zone 名稱无效", "n0484": "zone 找不到", "n0485": "zone 解析失败", "n0486": "一般查詢日志", "n0487": "一鍵安装", "n0488": "一鍵创建完成（draft 資源請到各頁「应用」）", "n0489": "上传與 POST", "n0490": "上次全部备份有失败", "n0491": "下一步：写入 conf → 应用 edges → DNS 同步（及可選 SSL）", "n0492": "下一步：將 PAM 片段併入 /etc/pam.d/sshd（nullok）", "n0493": "下一步：系統安装 libpam-google-authenticator + 合併 PAM 片段（見下方）", "n0494": "不可删除沙箱根目录", "n0495": "不可删除沙箱根目录或回收桶路径", "n0496": "不存在", "n0497": "不支援此操作方法", "n0498": "不支援的訊號（只允许 TERM / KILL / HUP / USR1）", "n0499": "不是資料夾", "n0500": "不能删除最後一個 admin", "n0501": "中繼埠號无效", "n0502": "中繼已应用到系統", "n0503": "中繼设置已写入 dataDir（应用到系統需开启系統变更）", "n0504": "主机 memory 使用率超过 90%", "n0505": "主機指標", "n0506": "主要内存快取，通常為 RAM 50–70%", "n0507": "二进制不在 PATH，服务无法就绪", "n0508": "二進制日志", "n0509": "互動超时（秒）", "n0510": "人必須做：雲防火墙、邮件 PTR/rDNS、舊機保留觀察期", "n0511": "今日已自動 vacuum", "n0512": "仍需到 Cron 頁「安装到系統 crontab」才會真正生效", "n0513": "以 Nginx root 或「靜態部署」提供 public/", "n0514": "以 root 启动 ysk-server 服务（systemctl / 控制面 unit）", "n0515": "以 root 启动並设置 YSK_EXECUTE=1（見主機设置／部署文件）", "n0516": "以控制面用户执行指令（degraded — 非项目 Linux 用户）", "n0517": "任意 shell — 默认拒绝", "n0518": "服务器字符集", "n0519": "服务器尚未安装對應程式（command -v 無結果）", "n0520": "服务器排序规则", "n0521": "服务器未安装 MySQL 客戶端", "n0522": "服务器未安装 PostgreSQL 客戶端", "n0523": "服务器未安装 Redis 客戶端", "n0524": "服务器未安装必要元件，无法在管理面板完成此操作", "n0525": "服务器未开启 YSK_EXECUTE", "n0526": "服务器未开启系統变更权限或缺少 root，无法在管理面板完成安装", "n0527": "服务器未开启系統变更权限，无法匯出 Redis", "n0528": "服务器未开启系統变更权限，无法在管理面板下载安装 Webmail", "n0529": "服务器未开启系統变更权限，无法完成应用", "n0530": "服务器未开启系統变更权限，无法创建 SSH 连接", "n0531": "服务器未开启系統变更权限，无法打包 dump", "n0532": "服务器未开启系統变更权限，管理面板无法完成系統層操作", "n0533": "服务器未开启系統变更权限：已写入管理檔，无法 named-checkzone / reload", "n0534": "服务器監聽埠", "n0535": "佇列為空", "n0536": "位元碼快取", "n0537": "使用 YSK-SCRYPT 後備雜湊（生產環境建議改為 openssl 雜湊）", "n0538": "使用 YSK_SECRETS_KEY", "n0539": "使用 baseUrl/.ysk-cdn-health 默认探活路径（C2 可裝 health location）", "n0540": "使用呼叫端指定版本（latestOverride）", "n0541": "使用環境變數 YSK_LATEST_VERSION（離線／測試覆蓋）", "n0542": "來源不可用", "n0543": "來源缺 mysqldump — package 階段將无法匯出 MySQL", "n0544": "來源缺 pg_dump — package 階段將无法匯出 Postgres", "n0545": "來源缺 redis-cli — package 階段將无法匯出 Redis RDB", "n0546": "來源缺 sshpass", "n0547": "來源需要 rsync（未安装）", "n0548": "來源預檢未通过", "n0549": "來源預檢通过", "n0550": "例如 128M、256M、512M、-1（無限）", "n0551": "例如 512MiB；留空不设", "n0552": "例如 900 1 300 10；空字串关闭", "n0553": "例：--member 10.0.0.3=replica:fleet:SESSION_UUID", "n0554": "供應商 = ASN（自治系統），非消費品牌名", "n0555": "保持 22/80/443；受攻擊時可手動關非必要埠", "n0556": "保留策略：最近 10 份", "n0557": "保護 ysk-server process.pid", "n0558": "保護模式", "n0559": "偵測到 pam_google_authenticator 模組", "n0560": "备份 tar 成功但远端／restic 有问题", "n0561": "僅 admin", "n0562": "僅 admin 可 impersonate", "n0563": "僅 admin 可执行整機電源操作", "n0564": "僅 apex A", "n0565": "已列出托管配置（未写入系统）", "n0566": "僅写入 PM2 设置，未启动程序", "n0567": "僅写入管理檔（未要求重载）", "n0568": "僅写入管理设置 — 就绪後再發布並重载", "n0569": "僅写入範本（未要求 enable）", "n0570": "僅控制面登记（apply:false）；密码只回傳一次", "n0571": "僅支援 postgres + postgres-replica", "n0572": "僅支援 redis + redis-replica|redis-sentinel", "n0573": "僅有磁盘佔用粗估，唔係 HIT 比率", "n0574": "僅見 stub resolv（127.0.0.53）；實際上行 DNS 請看 resolvectl", "n0575": "僅警告，可繼續", "n0576": "儀表為控制面彙總；公網流量／真實 CDN 命中率需 edge access log 含 cache status", "n0577": "保存後會於下次部署写入 systemd Environment / 进程 env", "n0578": "允许 URL include", "n0579": "允许 URL 當文件開", "n0580": "允许上传文件", "n0581": "免費最高細分：國家 + 省／州 + 城市（enrich）+ ASN；城市政策默认關", "n0582": "全部 edge fan-out applied", "n0583": "全部 edge fan-out 失败", "n0584": "全部 edge purge 成功", "n0585": "全部 peer nameserver 已 reload", "n0586": "全部 peer reload 失败 — 文件可能已在磁盘但權威未刷新", "n0587": "全部 peer 失败", "n0588": "全部 peer：zone 已推送並 remote reload 成功", "n0589": "全部成功", "n0590": "全部略过（没有可备份的 home）— 不视为失败", "n0591": "共享緩衝", "n0592": "共用同一 RDB，已还原", "n0593": "其他运行期变量", "n0594": "其他常用", "n0595": "分享不存在或已過期", "n0596": "分數極高 — 建議人手应用「緊急」檔（永不自動）", "n0597": "分数极高 — 紧急档需人手确认（永不自动）", "n0598": "列出目录", "n0599": "列出进程", "n0600": "删除 default 路由需 confirmDefault: true", "n0601": "删除文件或目录", "n0602": "删除系統用户 — 默认拒绝", "n0603": "删除被阻擋：未开启系統变更权限，且路径在管理資料目录外", "n0604": "到 fail2ban 頁应用並 enable 服务", "n0605": "到封禁頁一鍵开启（soft／normal）", "n0606": "加固", "n0607": "匯出不存在或已過期", "n0608": "受攻擊", "n0609": "另開 21 與 PASV 段", "n0610": "只寫管理檔", "n0611": "可应用系統", "n0612": "可手動打包 dataDir/clusters//", "n0613": "可查看设置；安装／重启／写入系统设置需要系统变更权限", "n0614": "可考慮切回「日常」或「加固」", "n0615": "可選安装 pm2：npm i -g pm2", "n0616": "可選：SSL、WP-CLI、外掛", "n0617": "同步账户", "n0618": "否則只允许还原到 .restic-restore-* 安全目录", "n0619": "启动、停止、重启、开机自启", "n0620": "启动进程後未取得进程編號", "n0621": "啟用 OPcache", "n0622": "啟用 SSL", "n0623": "啟用中", "n0624": "單一文件上限", "n0625": "單次最多文件數", "n0626": "單节点有 wsrep，但 HA 需 ≥2 节点", "n0627": "在「資源」创建 MySQL（或填入現有 DB）並設 WP_DB_* 環境變數", "n0628": "域名尚無郵箱 — 只保留 domain-level vacation 草稿", "n0629": "域名无效", "n0630": "域名状态：active（控制面旗標）", "n0631": "域名状态：suspended（控制面旗標；唔等於 Postfix 已拒信）", "n0632": "端口、绑定、连接上限", "n0633": "埠检查异常", "n0634": "运行时", "n0635": "执行緒模型", "n0636": "壓縮檔唔支援預覽（.gz 等）", "n0637": "壞 Bot", "n0638": "外網探测", "n0639": "失控時最後手段", "n0640": "软件包名不合法", "n0641": "软件包安装未能执行：需要系統变更权限", "n0642": "软件包更新需要系統管理员权限", "n0643": "应用到 vsftpd", "n0644": "应用到系統", "n0645": "应用防護檔只會寫管理檔；需 YSK_EXECUTE=1 + root 才 applied", "n0646": "威脅已回落", "n0647": "字串 intern 緩衝（MB）", "n0648": "存取密码", "n0649": "存在错误級問題，請修正後再 apply", "n0650": "安全 → 我的安全 → 启用 2FA；政策可开 requireAdminTotp", "n0651": "安全與路径", "n0652": "安装 PAM", "n0653": "安装 vsftpd", "n0654": "安装失败", "n0655": "安装软件包", "n0656": "安装完成", "n0657": "安装步驟", "n0658": "安装系統设置", "n0659": "完整", "n0660": "客戶端闲置超时", "n0661": "密码加密", "n0662": "密码只出現在 SQL 腳本佔位符 CHANGE_ME", "n0663": "密码已以 crypt 雜湊保存（唔存明文）", "n0664": "密码為空", "n0665": "密码登入需要 sshpass", "n0666": "密码登入需要本機安装 sshpass", "n0667": "密码至少需要 8 字符", "n0668": "密码過短（至少 8 字）— 郵箱已创建但未写入雜湊", "n0669": "密码需由安全管道设置", "n0670": "审批仍在等待中", "n0671": "审批動作與請求不符", "n0672": "审批已被拒绝", "n0673": "写入 NODE_OPTIONS=--max-old-space-size=N", "n0674": "写入 Nginx 限速 drop-in", "n0675": "写入 home 檔 ≠ PAM 已生效", "n0676": "写入失败", "n0677": "写入账户檔", "n0678": "写入文件", "n0679": "封存模式", "n0680": "將片段 Include 到 sshd_config，或 POST /api/v1/sftp/sshd-snippet/apply 安装", "n0681": "项目 Linux 用户隔離", "n0682": "项目 id 必填", "n0683": "项目 id 无效，无法產生 home", "n0684": "项目 id 過短，无法產生系統用户名", "n0685": "项目 internal-sftp Match 用户通常唔走 interactive shell — TOTP 主要影響 SSH shell/scp", "n0686": "项目 managed log 无效", "n0687": "项目不存在", "n0688": "项目不存在或未设置 home", "n0689": "项目名稱无法產生有效系統用户名", "n0690": "项目已恢復", "n0691": "项目已暫停（503）", "n0692": "项目创建失败，已中止", "n0693": "项目沒有 domain — 請先设置主域名", "n0694": "项目無 linux_user", "n0695": "项目級 purge 目前清主機共用 nginx cache 目录（非 per-vhost zone）", "n0696": "项目缺少 linuxUser — 无法创建對齊隔離的 FTP 账户", "n0697": "项目缺少 linux_user", "n0698": "项目覆寫只填要改的鍵；空白＝沿用全域", "n0699": "项目詳情 → 資源 → 创建系統用户／遷移到 /home/ysk-server-{id}（需 YSK_EXECUTE + root）", "n0700": "對齊 jail 擁有權", "n0701": "尚未 os_provisioned", "n0702": "尚未下载 GeoIP 庫 — 請在防護中心「IP 准入」按更新", "n0703": "尚未分配埠，請先部署项目", "n0704": "尚未同步到系統 Nginx（僅管理檔）", "n0705": "尚未在服务器创建 Redis 資源，請确认 redis-cli、TCP 與 YSK_EXECUTE=1", "n0706": "尚未应用到 vsftpd 服务 — 請使用「应用」或 vsftpd 服务頁完成启动", "n0707": "尚未应用邮件域名", "n0708": "尚未建置 Web 接口 — 僅 API 模式", "n0709": "尚未有本地 GeoIP 庫 — 請更新", "n0710": "尚未產生 DNSSEC 密钥", "n0711": "尚未登记 CDN 节点", "n0712": "尚未登记 passkey", "n0713": "尚未确认維護窗（package 階段會停服）", "n0714": "尚未设置 LLM 连接", "n0715": "尚未加载 zone：請於管理面板重試", "n0716": "尚無 CDN 站点", "n0717": "尚无托管 Nginx 配置", "n0718": "尚無可用 HIT/MISS 抽樣 — overall hit-rate 未知", "n0719": "尚無项目", "n0720": "尚無產物 — 請先 plan", "n0721": "就绪", "n0722": "工作階段保存與 cookie", "n0723": "已 enable --now fail2ban", "n0724": "已 galera_new_cluster（bootstrap）", "n0725": "已 reload fail2ban", "n0726": "已 reload nginx", "n0727": "已 restart fail2ban", "n0728": "已 scp zone 檔（written on peer ≠ named reloaded）", "n0729": "已 scp 到 peer /tmp（written on peer ≠ service restarted）", "n0730": "已 systemctl reload nginx", "n0731": "已下载並解壓 Roundcube", "n0732": "已停用 UFW（警告：主機埠將直接暴露）", "n0733": "已保存项目 php.ini 覆寫；重新应用 FPM／部署後生效", "n0734": "已保存管理设置（未应用到系統服务）", "n0735": "已保存设置（未要求应用系統）", "n0736": "已删除", "n0737": "已删除 key · 重寫 authorized_keys", "n0738": "已删除集群登记；系統 conf 需人手清理（v1 不自動拆除）", "n0739": "已删除本機臨時密钥", "n0740": "已即時 ip addr add（设置檔已写入，重開應仍在）", "n0741": "已即時应用 databases（部分選項仍需重啟）", "n0742": "已取消排程關機／重啟", "n0743": "已同步到系統並重载", "n0744": "已启动", "n0745": "已啟用 HSTS", "n0746": "已启用 NTP 同步", "n0747": "已啟用 UFW", "n0748": "已啟用 WebDAV · Basic 用户 ysk · 密码為本次 token（只显示一次）", "n0749": "已啟用 systemd 服务", "n0750": "已嘗試 stop redis", "n0751": "已嘗試清除 nginx cache 目录並 reload（若主機未開 proxy_cache 則可能無檔可清）", "n0752": "已在服务器完成证书申請流程", "n0753": "已应用 CF-only UFW（origin 只收 CF + 保留埠）", "n0754": "已应用 fail2ban", "n0755": "已应用中繼设置到系統 Postfix", "n0756": "已应用到系統 Nginx", "n0757": "已应用防火墙规则", "n0758": "已安装並嘗試啟用 ysk-server.service", "n0759": "已安装到目前程序用户的系統 crontab", "n0760": "已写入 .google_authenticator（含 5 組 scratch codes）", "n0761": "已写入 rspamd multimap + postfix snippet", "n0762": "已写入安装腳本", "n0763": "已写入控制面；請用「应用限制到 OS」或重新 Deploy 写入 unit", "n0764": "已写入管理 jail.local（未要求应用系統）", "n0765": "已写入管理文件；尚未套用到系统 conf.d", "n0766": "已写入设置檔（未下载软件包）", "n0767": "已写入調校檔；重新部署项目後才會進線上进程", "n0768": "已寫管理檔，但未应用系統 conf：需 YSK_EXECUTE=1", "n0769": "已寫管理檔，但未应用系統 conf：需要 root", "n0770": "已封锁：無真實 candidateVersion", "n0771": "已封锁：需确认高風險更新", "n0772": "已封锁：需要管理员权限", "n0773": "已创建 DNSSEC 目录（僅說明檔）", "n0774": "已從", "n0775": "已從庫移除（disk install 未自動清除；用 uninstall --purge）", "n0776": "已從控制面移除；系統账号需手動 DROP USER（誠實：未自動 drop）", "n0777": "已從连接", "n0778": "已拒绝", "n0779": "已拒绝 by allowlist", "n0780": "已拒绝：無真實升級目標", "n0781": "已扫描 nginx access log 樣本", "n0782": "已於 MySQL/MariaDB 创建只讀用户", "n0783": "已於 PostgreSQL 创建只讀角色", "n0784": "已是最新版本（頻道已确认）", "n0785": "已暫停", "n0786": "已清空全部佇列", "n0787": "已清除 catch-all", "n0788": "已產生 DS 紀錄（請自行提交 registrar — 面板唔會自動發佈）", "n0789": "已產生加密备份（同一 dataDir master key 可解密）", "n0790": "已用 SHA512-CRYPT 雜湊密码（Dovecot）", "n0791": "已略過 Nginx 设置检查（未安装或未開系統变更权限）", "n0792": "已登记上传证书路径（文件置於 /etc/ysk-server/certs）", "n0793": "已知惡意 UA", "n0794": "已确认", "n0795": "已确认維護窗", "n0796": "已移除控制面登记", "n0797": "已移除登记紀錄", "n0798": "已符合意圖隔離，無需遷移", "n0799": "已裝版本 = apt Candidate，無可用升級", "n0800": "已复制到 /etc/fail2ban/jail.local", "n0801": "已退役（磁盘文件未自動刪；可 uninstall）", "n0802": "已送出立即重啟指令", "n0803": "已送出立即關機指令", "n0804": "已重啟 postgresql", "n0805": "已重啟 redis-server", "n0806": "已重啟 redis-server 以应用需重啟項目", "n0807": "已重啟（重载不支援）", "n0808": "已重新啟用连接（重開仍在）", "n0809": "已重渲染 TLS edge conf（控制面）", "n0810": "已重载 Nginx (static site live if DNS points here)", "n0811": "已重新加载 Nginx", "n0812": "已开启系統变更权限（YSK_EXECUTE）", "n0813": "已附一次性登入密码 — Roundcube 外掛可自動 login", "n0814": "账户已登记於管理面；需系統权限才能讓 FTP 服务生效", "n0815": "账号已解鎖 (usermod -U)", "n0816": "账号已鎖定 (usermod -L)", "n0817": "常見漏洞路径扫描", "n0818": "庫中無此 IP 记录", "n0819": "创建系統用户需要系統管理员权限", "n0820": "创建邮件域名並於詳情頁应用", "n0821": "建置完成", "n0822": "建議切換至「受攻擊」防護檔", "n0823": "建議检查 SSH 與非必要埠", "n0824": "建議緊急檔", "n0825": "建議至少 1 個 replica；而家計劃仍可產生 primary conf", "n0826": "建議至少 2 個节点（生產建議 3）；而家計劃仍可產生", "n0827": "建議开启 CDN Under Attack 模式", "n0828": "建議开启自動 ban", "n0829": "強制 HTTPS（HTTP→301）", "n0830": "強制安全傳輸", "n0831": "強制離線模式", "n0832": "恢復：控制面 status=active", "n0833": "慢查詢日志", "n0834": "慢查詢閾值（ms）", "n0835": "慢查詢閾值（秒）", "n0836": "证书申請失败", "n0837": "應 ≥ 單一文件上限", "n0838": "應设置保留策略清理舊备份", "n0839": "成功僅代表此 target 可 BatchMode 登入，≠ 全域授權", "n0840": "或整數如 32767", "n0841": "所需软件均已安装", "n0842": "打包被权限/工具阻擋", "n0843": "批量封禁", "n0844": "找不到 CLI binary — systemd 唔會 enable 成 silent placeholder", "n0845": "找不到 DNS zone — 請在站点 dns.zoneId 指定，或先创建匹配域名的 zone", "n0846": "找不到 PowerDNS 工具 — 請安装 pdns-server / pdns-tools", "n0847": "找不到 Roundcube plugins 目录 — 已寫骨架；請安装 Roundcube 或傳 roundcubePluginsDir", "n0848": "找不到 SQL 檔", "n0849": "找不到 Sieve 腳本", "n0850": "找不到 config.inc.php — 請手動: $config[\\'plugins\\'][] = \\'ysk_sso\\';", "n0851": "找不到 edge.conf — 請先渲染", "n0852": "找不到 key", "n0853": "找不到 migrate job", "n0854": "找不到 pm2 — 无法以 PM2 停止", "n0855": "找不到別名", "n0856": "找不到集群", "n0857": "找不到可 reload 的本機 nameserver（rndc/named/bind9/pdns）", "n0858": "找不到可用证书 — 請先於 SSL 頁上传，或执行 LE 簽發", "n0859": "找不到可用的 NetworkManager 连接", "n0860": "找不到回收項目", "n0861": "找不到實例", "n0862": "找不到项目 access log — 請确认 nginx access_log 路径或日志檔存在", "n0863": "找不到方案", "n0864": "找不到步驟", "n0865": "找不到版本", "n0866": "找不到节点", "n0867": "找不到数据库", "n0868": "拒绝", "n0869": "拒绝 down loopback", "n0870": "拒绝 renice 自身控制面進程", "n0871": "拒绝 systemctl enable：未安装真實 agent CLI（避免 placeholder 假 running）", "n0872": "拒绝修改 loopback 位址（保護）", "n0873": "拒绝删除 loopback 核心地址", "n0874": "拒绝覆寫 homeDir — 請設 overwriteHome + confirmPhrase 或改用安全目標目录", "n0875": "拒绝訊號 PID 1（init/systemd 保護）", "n0876": "拒绝訊號疑似 ysk 控制面進程；進階可 forceControlPlane", "n0877": "拒绝訊號自身進程（ysk-server）；若確定需要請 forceSelf", "n0878": "拒绝读取敏感路径", "n0879": "拒绝路径穿越或非法字符", "n0880": "持久 default 路由需要 Gateway", "n0881": "持久化", "n0882": "指令參數為空", "n0883": "指令被阻挡：变更主机需开启系统变更权限（YSK_EXECUTE）", "n0884": "扫描", "n0885": "扫描路径", "n0886": "探测 INFO replication", "n0887": "探测 SHOW MASTER / REPLICA STATUS", "n0888": "探测 pg_is_in_recovery / pg_stat_replication", "n0889": "探测 wsrep（SHOW STATUS LIKE 'wsrep%'）", "n0890": "控制面已写入但尚未 applied 到系统 — 检查各功能页「应用」", "n0891": "控制面維持正常模式", "n0892": "控制面緊急降级（local ops）", "n0893": "控制面資料目录", "n0894": "控制面進入 ddos-protection 提示", "n0895": "推送結果不完整（partial/failed）", "n0896": "提升连接速度，僅用 IP 授權", "n0897": "提示：填 Cloudflare zones + CF_API_TOKEN 先可 Under Attack API", "n0898": "操作无法完成", "n0899": "收緊 Nginx 限速並強化 fail2ban", "n0900": "性能与资源", "n0901": "新 IP／域名不宜立刻高量出站。請检查 Spamhaus 等黑名單，並遵循暖機指引。", "n0902": "新增 A／AAAA（apex 與 www）", "n0903": "新增 DMARC TXT 记录", "n0904": "新增 MX／SPF／DKIM DNS 记录", "n0905": "新增 _dmarc TXT 以改善投遞與回報。", "n0906": "方式 + 閾值", "n0907": "於 DNS 供應商新增產生的 MX、SPF（TXT）與 DKIM（TXT）。Cloudflare：邮件相關记录請用僅 DNS（灰雲）。", "n0908": "於 DNS 頁安装 PowerDNS 相關软件包", "n0909": "在面板 Go 运行环境安装目标版本", "n0910": "於面板 Node 执行環境安装目標版本", "n0911": "於面板 PHP 执行環境安装目標版本", "n0912": "於面板 Python 执行環境安装目標版本", "n0913": "於面板 Rust 执行環境安装 rustup／cargo", "n0914": "日常", "n0915": "日志", "n0916": "日志建議写入项目 logs 目录", "n0917": "日志收集器", "n0918": "日志檔", "n0919": "日志相對路径含不允许字符", "n0920": "日志等級", "n0921": "日志路径无效", "n0922": "時區", "n0923": "時區與字符", "n0924": "暫存表大小", "n0925": "暴露 PHP 版本頭", "n0926": "更多 fail2ban jail、更快封禁", "n0927": "更強隔離請使用獨立 Redis 實例", "n0928": "更新 fail2ban jail 清單（管理檔）", "n0929": "更新未完成", "n0930": "最嚴 Nginx 限連（約 1 req/s）", "n0931": "最多 12 個額外目录", "n0932": "最多 8 個 nameserver", "n0933": "最多快取文件數", "n0934": "最多輸入變數", "n0935": "最大 WAL", "n0936": "最大客戶端數", "n0937": "最大内存", "n0938": "最大连接错误", "n0939": "最小", "n0940": "最小 HTTP 服务器（/health）+ public 靜態目录", "n0941": "最長执行時間", "n0942": "最長輸入時間", "n0943": "有可用升級", "n0944": "有扫描／暴力跡象時", "n0945": "有效快取估計", "n0946": "有数据库/Redis dump 失败，已中止（不會 transfer）", "n0947": "服务名稱无效", "n0948": "未下载 WordPress 核心（需外網／另下）— 見 WORDPRESS_INSTALL.txt", "n0949": "未以系統 unit 启动（需 root + 已隔離）— 改用 pidfile", "n0950": "未偵測到 pam_google_authenticator — apt install libpam-google-authenticator", "n0951": "未啟用 2FA", "n0952": "已仅导出控制面摘要（未同步 Nginx）", "n0953": "未应用到系統 nginx（需 YSK_EXECUTE + root）— 状态：written", "n0954": "未应用到系統：需 YSK_EXECUTE + root", "n0955": "未安装 redis-cli 客戶端", "n0956": "未写入任何文件", "n0957": "未對系統產生可验证变更 — 唔會標 ok", "n0958": "未找到 postgresql conf.d — conf 只寫在 dataDir；唔會假裝已应用系統", "n0959": "未找到 secrets/ssh/.master.key 且無 YSK_SECRETS_KEY — 目標機可能无法解密 vault/2FA", "n0960": "未授權", "n0961": "未探测", "n0962": "未登记 certbot/LE 續期 cron（可用系統 certbot.timer）", "n0963": "未發布 nginx conf", "n0964": "未知 passkey", "n0965": "未知 source（journal:… / file:… / project:…）", "n0966": "未知的資源類型", "n0967": "未知软件", "n0968": "未知软件 ID", "n0969": "未知软件項目", "n0970": "未知電源動作", "n0971": "未确认維護窗，拒绝打包（避免熱 dump 不一致）", "n0972": "未綁项目 home — 僅写入控制面 ftps/ssh；需 sshd Match 才生效", "n0973": "未能应用更新：請設 YSK_SOURCE_ROOT 指向 git 工作目录，或 publish npm 软件包後設 YSK_NPM_PACKAGE", "n0974": "未能确认遠端最新版 — 唔會假裝「已是最新」", "n0975": "未能确认遠端最新版 — 唔會假裝已是最新", "n0976": "未裝 City Lite — 僅國家／ASN；更新庫可下载 DB-IP（免費 CC BY）", "n0977": "未裝 City Lite — 無省／市；請更新庫（免費 DB-IP）", "n0978": "未复制到 /etc/nginx（非 root 或未 EXECUTE）— managed conf 已在 dataDir", "n0979": "未设置 CF_API_TOKEN — 无法呼叫 Cloudflare API", "n0980": "未设置 Cloudflare API Token — 僅 dry-run", "n0981": "未设置磁盘配額（軟配額关闭）", "n0982": "操作完成", "n0983": "未請求安装到系統（installSystem=false）", "n0984": "未开启 YSK_EXECUTE", "n0985": "未开启系統变更权限（僅写入控制面设置）", "n0986": "未开启系統变更：无法执行 dnssec-keygen", "n0987": "未附密码 — 僅验证 email（外掛需另行登入）", "n0988": "未验证／重载：服务器未开启系統变更权限（僅写入管理檔）", "n0989": "本地 conf 缺失，請先 plan", "n0990": "本地备份檔不存在", "n0991": "本地尚無 zone 檔", "n0992": "本地無证书檔（或從未上传）", "n0993": "本地部分无效", "n0994": "本小时封禁次数达上限 — 到防护中心检查", "n0995": "本機 ip 可能不支援 -j；請升級 iproute2（目前僅 notes）", "n0996": "本機 nginx -t OK（僅控制面 managed conf，≠ edge applied）", "n0997": "本機 wsrep 尚可，但 size 未達全部登记节点", "n0998": "本機 ysk.json 无法读取 / 無 fingerprint", "n0999": "本機指標 OK；完整 healthy 需 peer probe（未做）", "n1000": "本機無 nginx — conf 已写入，未 reload", "n1001": "本機無可用 NM 连接；唔會假成功。可改用「僅即時」或啟用 NetworkManager。", "n1002": "本機無可用 ps — 无法列出進程（唔假空表當健康）", "n1003": "本機無對應 NM 连接；唔會假成功。可改「僅即時」或啟用 NetworkManager。", "n1004": "本輪無可 ban 對象", "n1005": "查詢名稱无效", "n1006": "查詢服务状态", "n1007": "根分区使用率超过 90%", "n1008": "根目录无效", "n1009": "根磁盘空間", "n1010": "概览", "n1011": "標準庫 TcpListener（無額外 crate）；Cargo.toml", "n1012": "標準庫 net/http；go.mod；/ 與 /health", "n1013": "模式：可生产", "modeProductionCapable": "可生产", "modeDegraded": "降级", "n1014": "模擬执行：未實際复制", "n1015": "预览试运行完成 — 未复制、未重新加载（正式同步请关闭预览试运行）", "n1016": "预览试运行完成 — 正式同步需管理员权限与系统变更权限", "n1017": "檔名須以 .conf 結尾", "n1018": "檔名須以 .sieve 結尾", "n1019": "文件", "n1020": "文件上传與 POST 體積", "n1021": "文件不存在或不可讀", "n1022": "文件不存在或已删除", "n1023": "检查佔用进程；見主機指標", "n1024": "检查文件变更", "n1025": "检查間隔（秒）", "n1026": "检查點超时", "n1027": "檢視者為唯讀，无法执行写入", "n1028": "权限模式須為 3–4 位八進制數字", "n1029": "权限與安全", "n1030": "正常", "n1031": "正常營運默认", "n1032": "正式環境請改 SECRET_KEY／DEBUG 並配置数据库", "n1033": "此 planner 僅支援 mariadb + mariadb-galera", "n1034": "此 planner 僅支援 mysql + mysql-replica", "n1035": "此主機無 systemd 服务管理", "n1036": "此项目是 Node runtime，請使用 Node 部署", "n1037": "此项目是 Node runtime，請使用 Node 部署（或改 runtime 為 static）", "n1038": "此更新需人工确认（高風險／需审批）。請勾選确认後再应用。", "n1039": "此清單為站外待辦（DNS 供應商／IP 擁有者）；控制面无法代勞 PTR／解封 25", "n1040": "此資源不支援应用到系統", "n1041": "此软件無 apt 软件包定義", "n1042": "每一列一個设置；内存、执行時間、輸入限制", "n1043": "每個项目以獨立 Linux 用户／群組运行", "n1044": "每小時 auto-ban 上限", "n1045": "每日（IPinfo Lite）", "n1046": "永久 ban", "n1047": "沒有 edge 节点 — 請先於 CDN 頁登记至少一個 edge", "n1048": "沒有可应用的真實升級（缺 candidate 或與目前版本相同）", "n1049": "沒有项目可做 restic 增量", "n1050": "沒有项目可备份（0 個）— 不視為失败", "n1051": "沙箱指令不可為空", "n1052": "清理日志／备份；見主機设置保存", "n1053": "清空防火墙规则 — 默认拒绝", "n1054": "測試寄信需要寄件者與收件者", "n1055": "準備创建系統用户…", "n1056": "瀏覽器开启站点完成 WP 安装精靈", "n1057": "無 .zone 檔可推", "n1058": "無 HostExecutor — 請手動 chown 文件", "n1059": "無 HostExecutor — 跳過 chown（請手動 chown）", "n1060": "無 IP 可写入 DNS", "n1061": "無 NM 连接可改；僅刪即時地址", "n1062": "無 NM 连接可改；僅刪即時路由", "n1063": "無 Redis 實例需 dump", "n1064": "無 SQL 数据库需 dump", "n1065": "無 SSH 目標", "n1066": "無 SSH／fleet 目標", "n1067": "無 access log cache status、亦無 cache 目录 — hit-rate 未知（請開 log_format 或先 apply edge）", "n1068": "無 access=fleet 且填了 fleetAgentId 的成員", "n1069": "無 access=ssh 的成員 — 請在 create 時用 :ssh 或改 members", "n1070": "無 apply_status", "n1071": "無 apt-get", "n1072": "無 authentication challenge", "n1073": "無 bind_ip 需清理", "n1074": "無 dataDir — 只更新数据库", "n1075": "無 domain vacation.sieve — 略過 per-mailbox 复制", "n1076": "無 edge 可应用（皆 skip/drain）— 控制面 conf 仍 written", "n1077": "無 galera_new_cluster；已 restart mariadb", "n1078": "無 home_dir", "n1079": "無 install 记录 — 庫状态改為 stored", "n1080": "無 linuxUser", "n1081": "無 master key / YSK_SECRETS_KEY", "n1082": "無 nameserver（可能未配置）", "n1083": "無 rdbRelPath", "n1084": "無 registration challenge", "n1085": "無 ssh peer", "n1086": "無 ssh peer 可推", "n1087": "無 sshpass（僅能用 key/agent 登入）", "n1088": "無 vacation.sieve 可部署", "n1089": "無 vhost 需要更新（或 conf 尚無 server 塊）", "n1090": "無 wsrep 状态（可能未裝 Galera 或服务未開）", "n1091": "無作用中 jail 或 fail2ban 未运行", "n1092": "無匹配檔名的日志", "n1093": "無可执行系統步驟（仍只是 written）", "n1094": "無可探活目標（無 healthUrl / baseUrl / publicIpv4）", "n1095": "無可用 access log 行（或格式不符）", "n1096": "無可用 access log（仍可用手動 / 自動 ban）", "n1097": "無可用 access／auth log 樣本", "n1098": "無可用 edge IP — 不修改 DNS（保留既有 managed 记录）", "n1099": "無可用 strict 用户（全部是救援或未登记）", "n1100": "无效 conf 名稱", "n1101": "无效 export id", "n1102": "无效 export 檔名", "n1103": "无效 linux_user", "n1104": "无效 public key", "n1105": "无效 snapshot id", "n1106": "无效 token", "n1107": "无效 unit", "n1108": "无效 unit 名稱", "n1109": "无效 vacuum-size（例：500M）", "n1110": "无效 vacuum-time（例：7d）", "n1111": "无效备份", "n1112": "无效备份格式", "n1113": "无效埠", "n1114": "无效的 key 名稱", "n1115": "无效的 projectId", "n1116": "无效的备份檔名", "n1117": "无效的搜尋 pattern", "n1118": "无效规则編號", "n1119": "无效数据库名", "n1120": "無暫停域名 — map 為空（系統应用後會 postmap 空檔）", "n1121": "無有效 IP", "n1122": "無模組時政策仍可用於嫌疑人 auto-ban enrich", "n1123": "無法封鎖到主機：未開啟系統變更權限。面板清單沒有新增。", "n1124": "无法 dump Redis：缺 redis-cli", "n1125": "无法 dump：服务器未开启系統变更权限", "n1126": "无法 fan-out：未开启系統变更权限", "n1127": "无法 import：服务器未开启系統变更权限", "n1128": "无法 list：未开启系統变更权限", "n1129": "无法 probe DNS cluster：未开启系統变更权限", "n1130": "无法 probe：未开启系統变更权限（SSH 需 EXECUTE）", "n1131": "无法 purge cache：未开启系統变更权限（YSK_EXECUTE）", "n1132": "无法 purge：未开启系統变更权限", "n1133": "无法 remote reload：未开启系統变更权限", "n1134": "无法 restic：未开启系統变更权限", "n1135": "无法 restore：未开启系統变更权限", "n1136": "无法 scp：需 YSK_EXECUTE=1", "n1137": "无法 stat home", "n1138": "无法 symlink：未开启系統变更权限", "n1139": "无法 unban：未开启系統变更权限", "n1140": "无法 unban：需 YSK_EXECUTE", "n1141": "无法下载 Adminer：未开启系統变更权限", "n1142": "无法下载 WordPress：服务器未开启系統变更权限", "n1143": "无法使用 PM2，改用本機进程管理", "n1144": "无法停服：未开启 YSK_EXECUTE", "n1145": "无法停止 PM2：服务器未开启系統变更权限", "n1146": "无法分發 SSL：未开启系統变更权限", "n1147": "同步已封锁：需系统变更权限", "n1148": "无法同步到系統 Nginx：需要系統变更权限", "n1149": "无法启动 PM2：服务器未开启系統变更权限", "n1150": "无法啟用 Apache 站点：需要系統变更权限", "n1151": "无法啟用 NTP：需要系統变更权限與 root", "n1152": "无法啟用 PHP-FPM：需要系統管理员权限", "n1153": "无法啟用 systemd 服务（請确认权限）", "n1154": "无法啟用 systemd 服务：需要系統管理员权限", "n1155": "无法啟用服务：需要系統管理员权限", "n1156": "无法在目標安装 rsync，且目標原本也沒有 rsync", "n1157": "无法在系統创建账号：需要 YSK_EXECUTE + root；已登记控制面（written/blocked）", "n1158": "无法执行 certbot：未开启系統变更权限", "n1159": "无法执行電源操作：需要系統变更权限（YSK_EXECUTE）與 root", "n1160": "无法应用到系統：需要 YSK_EXECUTE + root", "n1161": "无法应用系統中繼设置：需要系統变更权限", "n1162": "无法应用：計劃失败", "n1163": "无法安装 PowerDNS：需要系統管理员权限", "n1164": "无法安装到 /etc/ssh：需要 YSK_EXECUTE + root", "n1165": "无法安装到系統：服务器未开启系統变更权限（僅写入管理檔）", "n1166": "无法寄送測試信：服务器未开启系統变更权限或未安装邮件服务", "n1167": "无法创建 virtual user 数据库（缺 db_load）", "n1168": "无法创建账户数据库，登入可能失败", "n1169": "无法创建系統邮件用户：需要系統管理员权限", "n1170": "无法從 npm 或 GitHub 取得最新版本（未假裝已是最新）", "n1171": "无法探测 systemctl", "n1172": "无法推送 DNS cluster：未开启系統变更权限", "n1173": "无法推送遠端：未开启系統变更权限（本地备份仍成功）", "n1174": "无法收集 metrics", "n1175": "无法清除佇列：服务器未开启系統变更权限", "n1176": "无法準備 ACME：未开启系統变更权限", "n1177": "无法產生 crypt 密码雜湊（需要 openssl passwd）", "n1178": "无法立即执行：服务器未开启系統变更权限", "n1179": "无法統計 Tasks（ps state 失败）", "n1180": "无法复制 zone 檔到 dnssec 目录", "n1181": "无法計算 ysk.json fingerprint", "n1182": "无法讀 /etc/resolv.conf", "n1183": "无法读取 cmdline（進程可能已結束或無权限）", "n1184": "无法读取 numbered 规则", "n1185": "无法读取 statfs", "n1186": "无法读取佇列：服务器未开启系統变更权限", "n1187": "无法读取用户庫以检查 2FA", "n1188": "无法读取目標磁盘空間", "n1189": "无法变更 UFW：需 YSK_EXECUTE=1", "n1190": "无法变更主機名稱／時區：需要系統变更权限與 root", "n1191": "无法变更網路：需要系統变更权限（YSK_EXECUTE）與 root", "n1192": "无法加载 PowerDNS zone：服务器未开启系統变更权限", "n1193": "无法辨識 IPv4/IPv6", "n1194": "无法连接 127.0.0.1:6379", "n1195": "无法连接目標機", "n1196": "無登记紀錄", "n1197": "無硬阻擋項（仍可能有建議項）", "n1198": "無臨時密钥目录", "n1199": "無過期臨時用户", "n1200": "無郵箱 — 跳過系統 sieve 部署", "n1201": "無需创建遠端目录", "n1202": "熔斷", "n1203": "片段已写入 dataDir/security/fail2ban（未自動裝到 /etc）", "n1204": "片段已复制；請修正後手動 reload", "n1205": "状态 draft — 請到 FTP 服务頁「应用」才會写入 vsftpd", "n1206": "状态与版本", "n1207": "状态：", "n1208": "状态：applied（anvil + per-sender policy + maps）", "n1209": "状态：applied（symlink + config plugins[] 已啟用）", "n1210": "状态：applied（安全目录）", "n1211": "状态：applied（已覆寫 homeDir）", "n1212": "状态：applied（系統命令成功）", "n1213": "状态：applied（密钥+簽署本地 zone；非 registrar 上線）", "n1214": "状态：blocked — 管理檔已寫；未改 Postfix/Dovecot", "n1215": "状态：blocked（placeholder written）", "n1216": "状态：blocked（policy daemon 已生成；系統应用需 EXECUTE+root）", "n1217": "状态：executed ≠ 已上線，直到 certbot 完成且 reload", "n1218": "状态：failed（nginx -t 或 reload 失败）", "n1219": "状态：partial — 唔會標 applied（避免假成功）", "n1220": "状态：partial — 部分系統步驟失败", "n1221": "状态：partial（symlink 成功；config 需手動加 plugins）— 唔會標成完整 applied", "n1222": "状态：preview only", "n1223": "状态：written/partial（系統复制／reload／验证未完全成功）", "n1224": "状态：written/partial（關鍵步驟失败 — 唔標 applied）", "n1225": "状态：written（apply=false；未应用到系統）", "n1226": "状态：written（blocked system apply）", "n1227": "状态：written（conf 已寫；reload blocked）", "n1228": "状态：written（控制面）— 遠端 edge 尚未应用；PR-C3 才 fan-out + nginx -t/reload", "n1229": "状态：written（未应用到系統 Postfix/Rspamd）", "n1230": "状态：written（未复制到系統 Nginx；設 applySystem 才會 try reload）", "n1231": "状态：written（管理白名單已存；live fail2ban-client 需 YSK_EXECUTE，或「策略→应用到系統」重寫 jail.local）", "n1232": "状态：written（密钥/DS 已有；zone 未簽署或未找 zone 檔）", "n1233": "状态：written（非已上線 SSO）", "n1234": "状态：written（非已簽署／非已上線）— 唔假成功", "n1235": "状态：written（預覽／只寫管理檔）", "n1236": "状态：已写入並成功 reload 本機 nameserver", "n1237": "状态：已写入管理 zone 檔（尚未成為權威 DNS，除非你已 reload nameserver）", "n1238": "状态：已写入管理檔（未应用到系統）", "n1239": "状态：無資料（非假統計）", "n1240": "獨立 TOTP（與 panel operator 2FA 分開）", "n1241": "獨立於 panel operator 2FA", "n1242": "生命周期", "n1243": "生產可關並手動重载", "n1244": "生產環境請关闭", "n1245": "生产门槛：尚未完全达标，请查看下方缺项", "n1246": "生产门槛：通过（权限、Nginx、Node 就绪）", "n1247": "生产隔离：到项目「资源」创建 Linux 用户与 home", "n1248": "用户名 2–32 字符 [a-z0-9._-]", "n1249": "申請 SSL 需要域名與邮件", "n1250": "留空不限制；多路径用 : 分隔", "n1251": "留空用系統默认；可填絕對路径", "n1252": "略過", "n1253": "略過 DNS 解析", "n1254": "略過 chown（未以 root 隔離模式执行）", "n1255": "略過 chown（需 YSK_EXECUTE + root）— 文件可能為控制面用户擁有", "n1256": "略過 draining 节点", "n1257": "略過 reload：zone 验证失败", "n1258": "略過 remote reload（reload=false）— written ≠ applied", "n1259": "略過 usermod（未 os_provisioned）", "n1260": "略過 zone apply（applyZone=false）— 僅更新控制面 records", "n1261": "略過无效用户名", "n1262": "疑似 DDoS — 降级运行", "n1263": "白名單 IP：拒绝封禁", "n1264": "白名單：略過", "n1265": "監控 IP／域名聲譽並暖機", "n1266": "監聽 IP；建議 127.0.0.1 僅本機", "n1267": "監聽位址", "n1268": "目前以本機进程模式部署", "n1269": "目前以簡易 PHP 模式部署", "n1270": "目前权限讀不到防火墙状态（非攻擊）", "n1271": "目前非系統管理员权限，部分系統设置无法应用", "n1272": "目標 ysk.json 校驗失败", "n1273": "目標尚無 ysk-server CLI — 請确认 bootstrap 或手動 npm i -g ysk-server", "n1274": "目標已有 YSK 資料，已确认 forceWipeTarget", "n1275": "目標有 rsync", "n1276": "目標為 root", "n1277": "目標用户已暫停", "n1278": "目標缺 rsync（將在 bootstrap 安装）", "n1279": "目標認證需要 sshpass（未安装）", "n1280": "目標預檢失败", "n1281": "目標預檢未通过", "n1282": "目標預檢通过", "n1283": "目的地必須以 .zip 結尾", "n1284": "真正推送需 execute + YSK_EXECUTE=1", "n1285": "短標籤 7 日）— 建議立即更新", "n1449": "数据库尚未创建。請确认 mysql 客戶端與 YSK_EXECUTE=1 後再試。", "n1450": "数据库尚未创建。請确认 psql、TCP 與 YSK_EXECUTE=1 後再試。", "n1451": "数据库數量", "n1452": "数据库缺 name", "n1453": "数据库轉儲需另行納入", "n1454": "資料目录", "n1455": "資源分頁：创建／遷移系統用户", "n1456": "資源限制", "n1457": "超過閾值", "n1458": "路径不允许", "n1459": "路径不在已允许的額外 log 目录", "n1460": "路径越界拒绝", "n1461": "跳過", "n1462": "跳過刪舊 home：目標 canonical 內容不完整", "n1463": "軟配額已存；硬 setquota 請「应用限制到 OS」", "n1464": "輸入巢狀層級", "n1465": "輸入資料无效", "n1466": "逗號分隔；過嚴可能弄壞软件包", "n1467": "通常為 RAM 25%", "n1468": "连接与网络", "n1469": "進程仍在（可再送 KILL）", "n1470": "進程已結束（kill -0 失败）", "n1471": "高级", "n1472": "進階：secret 來自 panel（與 operator 2FA 同源 — 風險自負）", "n1473": "運維", "n1474": "遠端 SFTP 设置不完整（host/username/path）", "n1475": "遠端 applied ≠ cluster healthy — 請跑 probe --peers", "n1476": "遠端 migrate post 失败", "n1477": "遠端 mkdir 失败", "n1478": "遠端 post 回報 ok=false", "n1479": "遠端备份未啟用（略過推送）", "n1480": "遠端安装需 YSK_EXECUTE=1", "n1481": "遠端找不到 rndc / active named|bind9|pdns", "n1482": "远端推送或 restic 有失败 — 本地 tar 可能已成功，请看 sideResults", "n1483": "遠端文件、暴露信息、函式禁用", "n1484": "遠端無 active named/bind9/pdns（仍可 scp 文件）", "n1485": "遠端無 nginx — conf 已 scp（written on peer）", "n1486": "远端／restic 步骤已处理", "n1487": "遷移需要 YSK_EXECUTE + root", "n1488": "还原後未 chown（需 root + YSK_EXECUTE）", "n1489": "部分 DNSBL 未必完整支援 IPv6；結果僅供參考", "n1490": "部分 peer applied；其餘僅 written 或失败 — 勿當全集群已 reload", "n1491": "部分 peer reload 成功（partial）", "n1492": "部分或全部失败 — 请查看 results", "n1493": "部分或全部未应用到系統（需 YSK_EXECUTE）", "n1494": "部分推送失败 — 检查 SSH key / 防火墙", "n1495": "部分步驟失败 — 見 steps", "n1496": "部分系統步驟失败", "n1497": "部署", "n1498": "部署 PHP + 發布 Nginx（文件根 app/public）", "n1499": "部署时可覆盖", "n1500": "部署會 go build -o app .；需主機已安装 Go toolchain", "n1501": "部署會执行 venv + pip；ExecStart 使用 uvicorn main:app", "n1502": "部署會执行 venv + pip；entry 默认 app.py（非 ASGI）", "n1503": "部署／应用 FPM pool 時写入 php_admin_value", "n1504": "部署：面板「部署」會启动 server.js；written ≠ 已對外", "n1505": "邮件主機 A 记录", "n1506": "邮件主機 AAAA 记录（IPv6）", "n1507": "邮件管理设置目录", "n1508": "郵箱 ID 无效", "n1509": "郵箱本地部分无效", "n1510": "配額須為 1–1000000 MiB", "n1511": "配額須至少 1 MiB", "n1512": "重啟系統服务", "n1513": "重複被 ban 再加重", "n1514": "重载 vsftpd", "n1515": "重载網頁服务", "n1516": "错误報告等級", "n1517": "错误日志、慢查询", "n1518": "错误與日志", "n1519": "門檻數字", "n1520": "开启會嚴重影響效能", "n1521": "闲置超时（秒）", "n1522": "关闭", "n1523": "防火墙建議（不自動改 UFW 除非应用系統）", "n1524": "防火墙（內網）：TCP 3306, 4567, 4444, 4568", "n1525": "防護檔写入 nginx limit_req", "n1526": "防護檔維持期（hold）中，暫不降檔", "n1527": "防护：危急", "n1528": "防护：建议紧急档", "n1529": "防护：疑似受攻击", "n1530": "限制已写入控制面；应用到 OS 需 YSK_EXECUTE + root", "n1531": "限速", "n1532": "限速越界", "n1533": "限速／反垃圾旗標已存 DB；要進 Postfix/Rspamd 請用「应用限速/反垃圾到系統」", "n1534": "隔離模式：degraded — build／进程可能以控制面用户执行；生產請创建系統用户", "n1535": "隔離模式：degraded — 进程可能以控制面用户执行；生產請 root + YSK_EXECUTE 並创建系統用户", "n1536": "離線保存；含 TOTP secret。遺失 Authenticator 時可手動重建。", "n1537": "需 EXECUTE + root 先可自動 vacuum", "n1538": "需 NetworkManager active 才能持久改 DNS（唔會盲寫 /etc/resolv.conf）", "n1539": "需 YSK_EXECUTE 先可 ufw apply", "n1540": "需 YSK_EXECUTE 才會真正 auto-ban", "n1541": "需 YSK_EXECUTE 才能 banip", "n1542": "需 YSK_EXECUTE 才能控制 fail2ban 服务", "n1543": "需 YSK_EXECUTE=1 先可 vacuum journal", "n1544": "需 execute:true 或 dryRun:true", "n1545": "需 nginx log_format 含 $upstream_cache_status（或 X-YSK-Cache）先有 HIT/MISS", "n1546": "需 root + YSK_EXECUTE 才會真正 useradd；控制面不會假裝成功", "n1547": "需 root 先可 journalctl --vacuum", "n1548": "需 root 先可改 UFW", "n1549": "需主機已安装 cargo／rustc", "n1550": "需主機有 Python 與外網 pip", "n1551": "需主機有 Python 與外網 pip（否則安装依賴會失败）", "n1552": "需安装 bind9-dnsutils 並开启系統变更权限，才可真正执行 dnssec-keygen。", "n1553": "需确认字串 EMERGENCY；防鎖死自己", "n1554": "需系統 sshd Match/User 设置才會真正生效", "n1555": "需要 --target 或可 resume 的 --job", "n1556": "需要 MySQL／MariaDB 管理员权限", "n1557": "需要 YSK_EXECUTE", "n1558": "需要 YSK_EXECUTE 下载 Adminer", "n1559": "需要 admin", "n1560": "需要 aws CLI（或改用 restic s3 repo）", "n1561": "需要 id 或 all", "n1562": "需要 ip", "n1563": "需要 jobId", "n1564": "需要 linuxUser 或 projectId", "n1565": "需要 master 节点", "n1566": "需要 nginx geoip2 模組（libnginx-mod-http-geoip2）先會喺 HTTP 層生效", "n1567": "需要 primary 节点", "n1568": "需要 privateKey", "n1569": "需要 projectId", "n1570": "需要 root", "n1571": "需要 source", "n1572": "需要 sshpass、YSK 身份密钥（identityId），或本機默认 SSH key", "n1573": "需要 target（root@host）或 jobId 以 resume", "n1574": "需要 target，或含 target 的 jobId", "n1575": "需要 username 與 ssh- 開頭公鑰", "n1576": "需要 zone 域名", "n1577": "需要密码", "n1578": "需要有效 email", "n1579": "需要有效 email 與 domain", "n1580": "需要目前版本與最新版本", "n1581": "需要真實 candidateVersion（不可等於 current 或缺省）", "n1582": "需要系統管理员权限才能完成安装", "n1583": "需要系統管理员权限才能变更服务", "n1584": "需要系統变更权限才能同步/重载", "n1585": "需要系統变更权限才能同步到系統並重载 Nginx", "n1586": "需要系統变更权限才能掛 check_policy_service", "n1587": "需要系統变更权限才能复制 nginx conf 並 reload", "n1588": "同步已封锁：需管理员权限", "n1589": "需要至少一個 primary 节点", "n1590": "靜態網站", "n1591": "非 root — useradd／systemd／nginx 系統路径受限", "n1592": "非受限 seccomp 需要明確指定 runAsUser", "n1593": "公开请求／分钟", "n1594": "面板连接即將中斷；可用「取消排程」撤回（若仍在線）", "n1595": "面板非 root", "n1596": "預覽可用 apply:false", "n1597": "預覽模式 — 未写入任何文件", "n1598": "默认 uvicorn workers", "n1599": "默认以 Redis 邏輯 DB 編號隔離", "n1600": "默认字符集", "n1601": "默认验证外掛", "n1602": "額外日志路径无效", "n1603": "显示启动错误", "n1604": "显示错误、记录與報告等級", "n1605": "显示错误（畫面）", "n1606": "首次 build 可能數分鐘；失败時見 notes／日志", "n1607": "验证", "n1608": "验证碼无效", "n1609": "验证通过", "n1610": "未刷新套件索引（未开 YSK_EXECUTE）— 仅显示 apt list；开启 EXECUTE 才运行 apt-get update", "n1611": "UFW 已關閉：user.rules 有 {{n}} 條永久拒規則，但核心未強制執行。", "n1612": "UFW 已關閉。拒絕規則只會寫入 user.rules，核心不會丟棄封包。請先啟用 UFW。不會自動開啟。", "t0001": "listenPort 无效：{{v0}}", "t0002": "已還原版本 {{v0}}", "t0003": "文件過大（>{{v0}} bytes）", "t0004": "已存在：{{v0}}", "t0005": "目標已存在：{{v0}}", "t0006": "找不到：{{v0}}", "t0007": "壓縮失败： {{v0}}", "t0008": "已壓縮 {{v0}} 項 → {{v1}}", "t0009": "找不到：{{v0}}", "t0010": "un壓縮失败： {{v0}}", "t0011": "已解壓 {{v0}} → {{v1}}", "t0012": "无法從状态 {{v0}} 標記為已执行", "t0013": "此操作需要人工審批：{{v0}}", "t0014": "審批状态无效：{{v0}}", "t0015": "審批已是 {{v0}}", "t0016": "未知角色：{{v0}}", "t0017": "角色 {{v0}} 无法执行 {{v1}}（上限 {{v2}}）", "t0018": "{{v0}} 範圍的非读取操作需要指定 id", "t0019": "工具無主機执行器：{{v0}}", "t0020": "工具不在允許清單：{{v0}}", "t0021": "工具已明確拒絕：{{v0}}", "t0022": "找不到 Playbook：{{v0}}", "t0023": "ip -j addr 失败：{{v0}}", "t0024": "ip -j route 失败：{{v0}}", "t0025": "nmcli 写入地址失败：{{v0}}", "t0026": "已保存 {{v0}} → 连接「{{v1}}」", "t0027": "connection up 警告：{{v0}}", "t0028": "已重新啟用连接（重開仍在）", "t0029": "已新增 {{v0}} → {{v1}}（即時；重開可能消失）", "t0030": "已從连接「{{v0}}」移除 {{v1}}", "t0031": "NM 移除地址：{{v0}}", "t0032": "已删除即時 {{v0}} ← {{v1}}", "t0033": "link down 失败：{{v0}}", "t0034": "已 down {{v0}}", "t0035": "link up 失败：{{v0}}", "t0036": "已 up {{v0}}", "t0037": "設 MTU 失败：{{v0}}", "t0038": "nmcli 写入 gateway 失败：{{v0}}", "t0039": "已保存 default gateway {{v0}} → 连接「{{v1}}」（重開仍在）", "t0040": "nmcli 写入 routes 失败：{{v0}}", "t0041": "已保存靜態路由 {{v0}} →「{{v1}}」（重開仍在）", "t0042": "ip route add 失败：{{v0}}", "t0043": "已加即時路由 {{v0}}${gw ? ", "t0044": " : ''}（重開可能消失；要持久請用「保存」）", "t0045": "已從连接「{{v0}}」清除 ipv4.gateway", "t0046": "NM 清除 gateway：{{v0}}", "t0047": "已從「{{v0}}」移除路由 {{v1}}", "t0048": "NM 移除 routes：{{v0}}", "t0049": "ip route del 失败：{{v0}}", "t0050": "已刪即時路由 {{v0}}", "t0051": "已刪路由 {{v0}}", "t0052": "DNS 无效：{{v0}}", "t0053": "DNS 不是合法 IP：{{v0}}", "t0054": "nmcli modify 失败：{{v0}}", "t0055": "已還原 {{v0}} 使用 DHCP DNS（ignore-auto-dns=no）", "t0056": "nmcli modify 失败：{{v0}}", "t0057": "已写入 {{v0}}：DNS {{v1}}${search.length ? ", "t0058": "解析失败：{{v0}}", "t0059": "{{v0}} → {{v1}} 筆", "t0060": "{{v0}} 無結果", "t0061": "已簽發一次性 SSO token（{{v0}} 分鐘）", "t0062": "Webmail 下載安装失败：{{v0}}", "t0063": "已部署至 {{v0}}", "t0064": "系統部署失败：{{v0}}", "t0065": "已複製 vacation 到 {{v0}} 個郵箱 sieve 目录（written）", "t0066": "已部署 sieve + .dovecot.sieve → {{v0}}@{{v1}}", "t0067": "已停用 active sieve link → {{v0}}@{{v1}}", "t0068": "{{v0}}@{{v1}} sieve 部署失败: {{v2}}", "t0069": "已寫 per-sender policy daemon（{{v0}} domains）", "t0070": "{{v0}} 失败 (exit {{v1}}): {{v2}}", "t0071": "已写入 plugin 骨架 {{v0}}", "t0072": "symlink 失败: {{v0}}", "t0073": "已 symlink {{v0}} → {{v1}}", "t0074": "改 config 失败: {{v0}}", "t0075": "config 已包含 plugin {{v0}}: {{v1}}", "t0076": "已写入 {{v0}}: {{v1}}", "t0077": "將 {{v0}} 與 www.{{v1}} 指到服务器公開 IP。CDN（Cloudflare）可灰雲或橙雲。", "t0078": "PTR 須由 VPS／雲端 IP 擁有者设置，並與 HELO/EHLO（{{v0}}）一致。請於供應商控制台申請（AWS/GCP 常需工單）。", "t0079": "佇列 {{v0}} 封", "t0080": "postsuper 失败: {{v0}}", "t0081": "域名已登記：{{v0}}", "t0082": "郵箱已存在：{{v0}}", "t0083": "已创建 Maildir：{{v0}}", "t0084": "已创建系統用户 {{v0}}", "t0085": "创建系統用户失败：{{v0}}", "t0086": "虛擬郵箱對應：{{v0}}", "t0087": "写入 passdb 失败：{{v0}}", "t0088": "來源已存在: {{v0}}", "t0089": "已创建 {{v0}}: {{v1}} → {{v2}}", "t0090": "找不到邮件域名：{{v0}}", "t0091": "已寫 vacation 草稿 {{v0}}", "t0092": "已寫停用標記 {{v0}}", "t0093": "virtual_alias: {{v0}} ({{v1}} 條)", "t0094": "Postfix anvil: smtpd_client_message_rate_limit={{v0}} / 3600s（全域；取各域名 rate 最小值）", "t0095": "postconf 確認: {{v0}}", "t0096": "已寫 rspamd ratelimit.conf（~{{v0}}/h）", "t0097": "已重建聚合 map（{{v0}} domains）", "t0098": "保護模式 {{v0}}：已封鎖遠端模型（僅允許本機 LLM）", "t0099": "LLM 請求失败：{{v0}}", "t0100": "在 {{v0}}–{{v1}} 範圍內找不到可用埠", "t0101": "請在 confirm 欄位輸入正確字串：{{v0}}", "t0102": "延遲 {{v0}}s 會以最少 1 分鐘排程（shutdown +N 以分鐘計）", "t0103": "已排程重啟（約 {{v0}} 分鐘後）", "t0104": "已排程關機（約 {{v0}} 分鐘後）", "t0105": "读取失败：{{v0}}", "t0106": "列出失败：{{v0}}", "t0107": "服務名稱无效：{{v0}}", "t0108": "路径不在允許写入範圍：{{v0}}", "t0109": "purge／reload 失败：{{v0}}", "t0110": "DB {{v0}}：{{v1}} 個 key", "t0111": "(type {{v0}} — 僅顯示類型)", "t0112": "已写入 {{v0}}", "t0113": "写入失败：{{v0}}", "t0114": "key 不存在或未删除", "t0115": "home 不存在: {{v0}}", "t0116": "无法解析 snapshots JSON: {{v0}}", "t0117": "共 {{v0}} 個 restic 快照", "t0118": "覆寫 home 需 confirmPhrase=\"{{v0}}\"（雙重確認）", "t0119": "dry-run：snapshot {{v0}} 含 {{v1}} 條路径（最多顯示 100）", "t0120": "dry-run 失败: {{v0}}", "t0121": "已還原 snapshot {{v0}} → {{v1}}", "t0122": "restore 失败 exit={{v0}}", "t0123": "已写入管理片段：{{v0}}", "t0124": "项目 Linux 用户約 {{v0}} 個（Match User ysks_*,ysk_*）", "t0125": "請手動：cp {{v0}} /etc/ssh/sshd_config.d/ && systemctl reload sshd", "t0126": "sshd -t 失败，未 reload：{{v0}}", "t0127": "已安装 {{v0}} 並 reload sshd", "t0128": "已安装片段但 reload 失败：{{v0}}", "t0129": "已写入控制面摘要 {{v0}}（{{v1}} bytes）", "t0130": "托管 Nginx 配置：{{v0}} 个（面板数据目录 nginx/conf.d）", "t0131": "未知範本：{{v0}}", "t0132": "範本 {{v0}}：{{v1}}", "t0133": "{{v0}} 已存在 — 已略過（force 可覆寫）", "t0134": "WordPress 安装說明 — {{v0}}", "t0135": "域名：{{v0}}", "t0136": "進程 entry 默认 {{v0}}.wsgi:application（gunicorn）", "t0137": "部署會 cargo build --release；二進位默认 ./target/release/{{v0}}", "t0138": "Axum 範本：cargo build --release 需外網 crates.io", "t0139": "二進位 ./target/release/{{v0}}", "t0140": "已创建 {{v0}}、略過 {{v1}}、错误 {{v2}}", "t0141": "{{v0}}前必須完成项目 Linux 用户隔離（資源分頁 → 创建系統用户）。", "t0142": " 預期 home：/home/ysk-server-{{v0}} · user：{{v1}}", "t0143": "已 chown {{v0}}:{{v1}} → {{v2}}", "t0144": "以项目用户 {{v0}} 执行指令", "t0145": "pidfile 以 runuser -u {{v0}} 启动", "t0146": "已写入 FPM pool：{{v0}}", "t0147": "已啟用 pool：{{v0}}", "t0148": "/etc/php/{{v0}}/fpm 找不到 — install php{{v1}}-fpm", "t0149": "{{v0}} 已安装", "t0150": "安装 {{v0}}", "t0151": "未能安装 {{v0}}", "t0152": "SSH probe 失败：{{v0}}", "t0153": "nameserver 活躍：{{v0}}", "t0154": "zone 目录存在（{{v0}} 個 .zone）", "t0155": "zone 目录不存在：{{v0}}", "t0156": "remote reload 失败：{{v0}}", "t0157": "{{v0}}: scp 失败 {{v1}}", "t0158": "scp {{v0}} 檔 OK → {{v1}}", "t0159": "scp 部分/全部失败（ok={{v0}} fail={{v1}}）", "t0160": "enable 失败：{{v0}}", "t0161": "disable 失败：{{v0}}", "t0162": "UFW DENY from {{v0}}（永久規則，直至手動刪）", "t0163": "deny 失败：{{v0}}", "t0164": "已刪 UFW DENY {{v0}}", "t0165": "delete 失败：{{v0}}", "t0166": "已刪規則 #{{v0}}", "t0167": "刪 #{{v0}} 失败：{{v1}}", "t0168": "已允許 {{v0}}/{{v1}}", "t0169": "allow 失败：{{v0}}", "t0170": "reload 嘗試失败 ({{v0}}): {{v1}}", "t0171": "隔離模式：以项目用户 {{v0}} 運作", "t0172": "使用 Node 执行檔：{{v0}}", "t0173": "目標埠：{{v0}}", "t0174": "已应用面板 Node 調校（{{v0}}）", "t0175": "应用後找不到進入點：{{v0}}", "t0176": "以 systemd unit 部署：{{v0}}", "t0177": "以 PM2 部署：{{v0}}", "t0178": "启动行程失败：{{v0}}", "t0179": "已启动 pid={{v0}}，pidfile={{v1}}", "t0180": "已發布 Nginx 设置（管理檔）：{{v0}}", "t0181": "已创建佔位頁：{{v0}}", "t0182": "使用既有：{{v0}}", "t0183": "靜態 Nginx 设置：{{v0}}", "t0184": "文件根目录：{{v0}}", "t0185": "HTTP 基本認證：{{v0}}（{{v1}}）", "t0186": "類型：{{v0}}", "t0187": "整站重新導向 → {{v0}}", "t0188": "使用已上傳证书：{{v0}}", "t0189": "已啟用 SSL（默认 Let’s Encrypt 路径；或於 SSL 頁上傳 {{v0}} 证书）", "t0190": "重载 Nginx 失败：{{v0}}", "t0191": "已写入暫停用虛擬主機：{{v0}}", "t0192": "Runtime {{v0}} — 只同步 Git，不重啟行程", "t0193": "已写入環境變數 {{v0}}（{{v1}} 項）", "t0194": "PHP-FPM pool 用户：{{v0}}（项目隔離）", "t0195": "runtime 版本 → {{v0}}", "t0196": "已合併面板 php.ini（{{v0}} 條 php_admin_*）", "t0197": "PHP-FPM 生產 Nginx 设置：{{v0}}", "t0198": "Nginx reload 結束碼={{v0}}: {{v1}}", "t0199": "PHP 內建服务器 pid={{v0}} @ 127.0.0.1:{{v1}}", "t0200": "已送 SIGTERM 至 {{v0}}", "t0201": "已送 SIGKILL 至 {{v0}}", "t0202": "pid {{v0}} 已結束", "t0203": "deployProcess 不適用於 runtime「{{v0}}」", "t0204": "隔離模式：以项目用户 {{v0}} 建置與启动", "t0205": "Runtime：{{v0}} · 埠 {{v1}} · entry {{v2}}", "t0206": "建置：{{v0}}", "t0207": "建置失败：{{v0}}", "t0208": "已应用面板 {{v0}} 調校（{{v1}}）", "t0209": "已写入 systemd 範本：{{v0}}", "t0210": "已 enable --now 项目 unit（User={{v0}}）", "t0211": "systemctl 启动失败：{{v0}}", "t0212": "写入系統 unit 失败：{{v0}}", "t0213": "pidfile 启动 pid={{v0}}${mode === 'isolated' ? ", "t0214": "pidfile 启动失败：{{v0}}", "t0215": "健康檢查未通過（{{v0}}ms）：{{v1}}", "t0216": "健康檢查通過（{{v0}}ms）", "t0217": "已写入 Nginx 反代：{{v0}}", "t0218": "共 {{v0}} 個 banned IP", "t0219": "已 unban {{v0}} @ {{v1}}", "t0220": "unban 失败: {{v0}}", "t0221": "管理白名單: {{v0}} ({{v1}} 項)", "t0222": "sshd ignoreip {{v0}} {{v1}} · 状态：applied", "t0223": "fail2ban-client ignoreip 失败：{{v0}}（管理檔已寫；唔假 applied）", "t0224": "建議 fail2ban jails: {{v0}}", "t0225": "已写入 unit 範本 {{v0}}", "t0226": "尚未 applied（{{v0}}）", "t0227": "状态 {{v0}}", "t0228": "数据库數量：{{v0}}（索引 0–{{v1}}）", "t0229": "已複製到 {{v0}}", "t0230": "无法複製到系統 conf 目录：{{v0}}", "t0231": "複製 conf 失败：{{v0}}", "t0232": "已重啟 {{v0}}", "t0233": "複製到 {{v0}} 失败：{{v1}}", "t0234": "拒絕額外目录：{{v0}}", "t0235": "目录名不合法：{{v0}}", "t0236": "略過默认目录（已掃描）：{{v0}}", "t0237": "{{v0}}（未產生）", "t0238": "journal php{{v0}}-fpm（pool log 未見）", "t0239": "grep「{{v0}}」：{{v1}} 行命中（尾端掃描 {{v2}} bytes）", "t0240": "顯示尾端 {{v0}} 行（文件 {{v1}} bytes，已截斷）", "t0241": "顯示尾端 {{v0}} 行（文件 {{v1}} bytes）", "t0242": "找到 {{v0}} 個日誌檔（未指定內容關鍵字）", "t0243": "无法读取：{{v0}}", "t0244": "內容搜尋「{{v0}}」：掃 {{v1}} 檔、{{v2}} 檔有命中（只掃各檔尾端）", "t0245": "{{v0}} 服务器尚未安装", "t0246": "{{v0}} 服務未運行", "t0247": "{{v0}} 客戶端尚未安装", "t0248": "客戶端：{{v0}}", "t0249": "服务器：{{v0}}", "t0250": "{{v0}} 已就緒", "t0251": "{{v0}} 安装未完成", "t0252": "{{v0}} 服務已启动", "t0253": "启动失败：{{v0}}", "t0254": "支持 Node.js 版本 {{v0}}；可用版本：{{v1}}", "t0255": "不支援的 PHP 版本 {{v0}}；可用：{{v1}}", "t0256": "不支援的 Python 版本 {{v0}}；可用：{{v1}}", "t0257": "不支援的 Go 版本 {{v0}}；可用：{{v1}}", "t0258": "未知 runtime：{{v0}}", "t0259": "dig 無答案（NXDOMAIN 或空）", "t0260": "已解析最近 {{v0}} 行", "t0261": "PostgreSQL 失败: {{v0}}", "t0262": "MySQL 失败: {{v0}}", "t0263": "{{v0}}: 无法 DROP — 需 EXECUTE+root（已標記 expired）", "t0264": "{{v0}}: DROP 失败 {{v1}}", "t0265": "{{v0}}: DROP 失败 {{v1}}", "t0266": "{{v0}}: 已標記 expired（未 DROP 系統帳號）", "t0267": "FTP 用户已存在: {{v0}}", "t0268": "已创建 FTP 帳戶 {{v0}}", "t0269": "Jail 路径: {{v0}}", "t0270": "密码已以 crypt 雜湊保存（唔存明文）", "t0271": "上傳檔將以项目 Linux 用户擁有：{{v0}}（应用 vsftpd 後生效）", "t0272": "略過无效用户名", "t0273": "帳戶 {{v0}}：已遷移明文密码 → crypt 雜湊", "t0274": "帳戶 {{v0}} 雜湊格式非 crypt（openssl 不可用）— 登入可能失败", "t0275": "帳戶 {{v0}} 無密码雜湊，无法登入直至重設", "t0276": "帳戶 {{v0}} 綁项目但無 linuxUser — 暫用全域 guest「{{v1}}」（請重建 FTP 帳戶）", "t0277": "已写入 {{v0}} 個帳戶设置", "t0278": "{{v0}} 個帳戶", "t0279": "帳戶 {{v0}} 已应用，vsftpd 運行中", "t0280": "略過 chown {{v0}}：系統用户「{{v1}}」不存在（請先创建项目系統用户）", "t0281": "chown 失败 {{v0}}：{{v1}}", "t0282": "FTP 專用家目录（{{v0}}）", "t0283": "项目 {{v0}} 根目录", "t0284": "项目 {{v0}} public", "t0285": "邮件 {{v0}}", "t0286": "尚未创建系統用户（需要系統管理员权限）。意圖 home：{{v0}}；目前使用控制面陰影目录。", "t0287": "{{v0}}；已改用陰影 home {{v1}}", "t0288": "已嘗試停止 {{v0}}", "t0289": "已移除舊 home：{{v0}}", "t0290": "舊 home 未刪（可手動）：{{v0}} — {{v1}}", "t0291": "拒絕删除不安全 home 路径：{{v0}}", "t0292": "未刪 OS home（需 root）：{{v0}}；系統用户 {{v1}} 可能仍存在", "t0293": "pdnsutil load-zone 失败：{{v0}}", "t0294": "已透過 pdnsutil 載入 zone {{v0}}", "t0295": "systemctl {{v0}} fail2ban 成功", "t0296": "{{v0}} 失败：{{v1}}", "t0297": "fail2ban ban {{v0}} @ {{v1}}（臨時，受 bantime 限制）", "t0298": "banip 失败：{{v0}}", "t0299": "监狱：{{v0}}", "t0300": "ignoreip 來源：dataDir/fail2ban/ignoreip.txt", "t0301": "安装檢查：{{v0}}", "t0302": "已達方案项目上限 {{v0}}（package: {{v1}}）", "t0303": "已達方案信箱上限 {{v0}}（package: {{v1}}）", "t0304": "已達方案数据库上限 {{v0}}（package: {{v1}}）", "t0305": "已写入 {{v0}}（DB 默认 {{v1}}@{{v2}}；可用環境變數覆寫）", "t0306": "pm2 start 失败：{{v0}}", "t0307": "pm2 已启动 {{v0}}", "t0308": "{{v0}} 尚未安装", "t0309": "已执行 {{v0}}", "t0310": "已应用 {{v0}} 項", "t0311": "以下項目可能需重啟：{{v0}}", "t0312": "即時应用 {{v0}} 項", "t0313": "需重啟項（請用生命週期重啟）：{{v0}}", "t0314": "已 ALTER SYSTEM {{v0}} 項並 reload", "t0315": "部分參數需重啟後生效：{{v0}}", "t0316": "已 {{v0}} {{v1}}", "t0317": "管理 ini：{{v0}}", "t0318": "/etc/php/{{v0}}/fpm 不存在 — 請先安装 php{{v1}}-fpm", "t0319": "已应用 {{v0}} 並 reload php{{v1}}-fpm", "t0320": "已複製 ini；reload 失败：{{v0}}", "t0321": "DNS zone draft {{v0}}（需到 DNS 頁写入/应用）", "t0322": "已含 IPv6 {{v0}}", "t0323": "邮件域名 {{v0}} 已登記", "t0324": "MySQL DB draft {{v0}}（需到数据库頁应用）", "t0325": "略過：家目录不存在 {{v0}}", "t0326": "已备份 {{v0}}/{{v1}} 个项目", "t0327": "（略过 {{v0}} 个无 home）", "t0328": "项目目录不存在：{{v0}}", "t0329": "tar 失败：{{v0}}", "t0330": "已写入备份 {{v0}}", "t0331": "dry-run：文件 {{v0}}+ 個（顯示前 {{v1}}）", "t0332": "无法列出: {{v0}}", "t0333": "已選擇性還原 (web) 到 {{v0}}", "t0334": "web 還原失败: {{v0}}", "t0335": "還原失败: {{v0}}", "t0336": "已從 {{v0}} 完整還原到项目目录", "t0337": "已 chown {{v0}}:{{v1}} → {{v2}}", "t0338": "执行: {{v0}}", "t0339": "管理 crontab 檔：{{v0}}", "t0340": "crontab 失败: {{v0}}", "t0341": "pg_dump 失败: {{v0}}", "t0342": "dump 失败: {{v0}}", "t0343": "psql 失败: {{v0}}", "t0344": "import 失败: {{v0}}", "t0345": "目標 {{v0}} 非空且非 git 倉庫 — 拒絕 clone 以免覆寫資料（僅清除帶 .ysk-scaffold 的佔位範本）", "t0346": "已 clone {{v0}} → {{v1}}", "t0347": "已 pull 更新：{{v0}}", "t0348": "linuxUser 无效：{{v0}}", "t0349": "已应用 {{v0}}：{{v1}} + www-data/nginx；home 750、public g+rX", "t0350": "ysk-web 应用部分失败：{{v0}}", "t0351": "管理路径 {{v0}}", "t0352": "nginx 管理 conf: {{v0}}", "t0353": "下載失败: {{v0}}", "t0354": "已下載 Adminer → {{v0}}", "t0355": "已有 {{v0}}", "t0356": "nginx 管理 conf: {{v0}}", "t0357": "已複製 → {{v0}}", "t0358": "埠號无效：{{v0}}", "t0359": "以用户 {{v0}} 安装 crontab", "t0360": "沿用已有密钥 {{v0}} 個", "t0361": "已簽署 zone → {{v0}}（需 reload 權威 DNS；DS 仍要人手上 registrar）", "t0362": "未找到 managed zone 檔（試過 dns/zones/{{v0}}.zone）— 跳過簽署", "t0363": "{{v0}} 個文件 under {{v1}}", "t0364": "TCP {{v0}}:{{v1}} 正常（{{v2}}ms）", "t0365": "TCP {{v0}}:{{v1}} 失败：{{v2}}", "t0366": "PING 失败：{{v0}}", "t0367": "超出配額：{{v0}}MB > {{v1}}MB", "t0368": "磁碟配額已超限（{{v0}} / {{v1}} MiB），无法{{v2}}", "t0369": "home 非意圖路径（目前 {{v0}} → 應為 {{v1}}）", "t0370": "Linux 用户名為舊式「{{v0}}」（新建會用 {{v1}}）；遷移會保留現有用户名並改 home", "t0371": "就緒 {{v0}} / 降級 {{v1}} / 未隔離 {{v2}}（共 {{v3}}）", "t0372": "；待处理：{{v0}}{{v1}}", "t0373": "项目「{{v0}}」隔離", "t0374": "已複製到本機路径 {{v0}}", "t0375": "身份 {{v0}}：{{v1}}", "t0376": "sftp（身份密钥）连到 {{v0}} 成功", "t0377": "sftp（身份密钥）失败：{{v0}}", "t0378": "sftp 连到 {{v0}} 成功", "t0379": "sftp 失败：{{v0}}", "t0380": "sftp 连到 {{v0}} 成功", "t0381": "sftp 失败：{{v0}}（可设置备份 remote identityId）", "t0382": "已上傳 S3 {{v0}}", "t0383": "S3 失败: {{v0}}", "t0384": "政策已開：{{v0}}/{{v1}} admin 已啟用 2FA", "t0385": "政策未強制：{{v0}}/{{v1}} admin 已啟用 2FA", "t0386": "{{v0}} 在 PATH", "t0387": "{{v0}} 找不到", "t0388": "請於系統安装 {{v0}}，或於面板软件／runtime 安装", "t0389": "可用版本：{{v0}}", "t0390": "使用率約 {{v0}}%（總 {{v1}} MB）", "t0391": "使用率約 {{v0}}%（{{v1}}）", "t0392": "於服務矩陣启动 {{v0}}", "t0393": "模式：{{v0}}", "t0394": "就緒 {{v0}} / 降級 {{v1}} / 缺少 {{v2}}（共 {{v3}} 項）", "t0395": "找不到（預期 {{v0}}）", "t0396": "主機 node：{{v0}}", "t0397": "主機 php：{{v0}}", "t0398": "主機 python：{{v0}}", "t0399": "主機 go：{{v0}}", "t0400": "主機 cargo：{{v0}}", "t0401": "Node 可用：{{v0}}", "t0402": "PHP 可用：{{v0}}", "t0403": "Python 可用：{{v0}}", "t0404": "Go 可用：{{v0}}", "t0405": "Rust 可用：{{v0}}", "t0406": "準備安装 Node {{v0}}", "t0407": "準備安装 PHP {{v0}}", "t0408": "準備安装 Python {{v0}}", "t0409": "準備安装 Go {{v0}} 到 /usr/local/ysk/go", "t0410": "準備安装 Rust（{{v0}}）到 /usr/local/ysk/rust", "t0411": "安装失败：{{v0}}", "t0412": "已准备 OpenJDK {{v0}} 安装脚本", "t0413": "已准备 Kotlin {{v0}} 安装脚本（需 JDK）", "t0414": "已准备 Bun（{{v0}}）安装脚本", "t0415": "项目 home 公鑰：{{v0}}", "t0416": "登入目標用户 {{v0}}（项目隔離 home）；請對 .ssh 执行 chown（API 會嘗試）", "t0417": "已 chown {{v0}} → {{v1}}", "t0418": "chown .ssh 失败：{{v0}}", "t0419": "已删除 key · 重寫 authorized_keys", "t0420": "不支援的類型：{{v0}}", "t0421": "TTL {{v0}} 建議介於 30–604800", "t0422": "名稱 {{v0}} 同時有 CNAME 與其他類型（禁止）", "t0423": "名稱 {{v0}} 有多個不同 CNAME 目標", "t0424": "移除设置失败：{{v0}}", "t0425": "帳戶 {{v0}} 已写入管理设置", "t0426": "无法移除文件：{{v0}}", "t0427": "已複製 {{v0}} 個设置檔到系統目录", "t0428": "欄位 {{v0}} 无效", "t0429": "目前 home 非意圖路径（意圖 {{v0}}）", "t0430": "usermod -s 失败：{{v0}}", "t0431": "鎖定失败：{{v0}}", "t0432": "解鎖失败：{{v0}}", "t0433": "set-property 失败：{{v0}}（下次 deploy 會写入 unit）", "t0434": "unit {{v0}} 未 active — 限制已存 DB，下次 deploy 写入 unit", "t0435": "setquota 未成功（文件系統可能未啟 user_xattr/quota）：{{v0}}", "t0436": "home 不存在：{{v0}}", "t0437": "已 chown {{v0}} → {{v1}}", "t0438": "top header 失败：{{v0}}", "t0439": "ps 完整欄位失败：{{v0}}", "t0440": "目前 NI={{v0}}", "t0441": "PID {{v0}} 是本控制面進程（process.pid）", "t0442": "進程不存在或無權探测（kill -0 exit {{v0}}）", "t0443": "kill -s {{v0}} 失败：${err || ", "t0444": "已送 {{v0}} → PID {{v1}}", "t0445": "{{v0}} 个项目已暂停", "t0446": "{{v0}} 个项目未创建系统用户", "t0447": "{{v0}} 项待审批", "t0448": "证书已过期：{{v0}}", "t0449": "证书 {{v0}} 日内到期：{{v1}}", "t0450": "时间 {{v0}}", "t0451": "DNSBL 上榜：{{v0}}", "t0452": "{{v0}} 项应用失败／blocked", "t0453": "{{v0}} 项仍为 written／draft", "t0454": "自动防护档：{{v0}}", "t0455": "操作失败：{{v0}}", "t0456": "Journal 磁盘偏高：≈{{v0}} MB", "t0457": "阈值 {{v0}} MB — 可到日志中心 vacuum 或调整保留", "t0458": "df 失败：{{v0}}", "t0459": "僅量測前 {{v0}} 個项目（共 {{v1}}）", "t0460": "目標版本 {{v0}} → {{v1}}", "t0461": "已嘗試升級 {{v0}}", "t0462": "升級失败 exit={{v0}}", "t0463": "apt list --upgradable: {{v0}} 可升級", "t0464": "apt list --upgradable 不可用（exit {{v0}}）；改用 apt-cache policy", "t0465": "dpkg+apt-cache policy: {{v0}} 套件", "t0466": "dpkg/apt-cache policy 失败或空白（exit {{v0}}）— 可能無 apt 或权限不足", "t0467": "Node 進程 {{v0}}（非 apt nodejs 套件則不列入可升級清單）", "t0468": "真實可升級（candidate ≠ current）: {{v0}}", "t0469": "npm registry 回應 HTTP {{v0}}", "t0470": "GitHub releases 回應 HTTP {{v0}}", "t0471": "GitHub package.json 回應 HTTP {{v0}}", "t0472": "npm 頻道：{{v0}}@{{v1}}", "t0473": "npm {{v0}} 不可用：{{v1}}", "t0474": "GitHub releases 不可用：{{v0}}", "t0475": "GitHub 源碼 package.json（{{v0}}）：{{v1}}", "t0476": "GitHub package.json 不可用：{{v0}}", "t0477": "有更新：{{v0}} → {{v1}}", "t0478": "來源目录 {{v0}} 不是 git repo — 可設 YSK_SOURCE_ROOT，或改用 npm 頻道（YSK_NPM_PACKAGE）", "t0479": "GitHub tarball 下載失败：{{v0}}", "t0480": "已下載原始碼到 {{v0}}（staging only）— 未替換運行中安装；請用部署腳本／git 工作目录完成切換", "t0481": "使用 git 來源：{{v0}}", "t0482": "git apply 步驟 {{v0}} 失败 (exit {{v1}}): {{v2}}", "t0483": "已更新來源樹至目標 {{v0}} 並 build — 請重啟 ysk-server 程序令新版本生效", "t0484": "已安装 {{v0}}", "t0485": "npm 更新失败：{{v0}}", "t0486": "已用 YSK_NPM_PACKAGE 安装 {{v0}}", "t0487": "YSK_NPM_PACKAGE 安装失败：{{v0}}", "t0488": "可升級 {{v0}} → {{v1}}（CRITICAL CVE，需確認）", "t0489": "可升級 {{v0}} → {{v1}}（HIGH CVE，需確認）", "t0490": "可升級 {{v0}} → {{v1}}（可能不相容，需確認）", "t0491": "可升級 {{v0}} → {{v1}}（安全修補）", "t0492": "可升級 {{v0}} → {{v1}}（apt Candidate）", "t0493": "無可用升級，但 OSV 標註已裝版有 {{v0}} 項漏洞信號", "t0494": "服務状态：{{v0}}", "t0495": "已偵測到可执行檔：{{v0}}", "t0496": "未知 Agent 運行時：{{v0}}", "t0497": "不支援的 Agent 類型：{{v0}}", "t0498": "安装指令失败（唔會假裝成功）：{{v0}}", "t0499": "Agent 找不到 session：{{v0}}", "t0500": "找不到任務：{{v0}}", "t0501": "用户已存在: {{v0}}", "t0502": "救援用户排除：{{v0}}", "t0503": "已排除项目 SFTP 風格用户（ysks_/ysk_，internal-sftp 不適合 kbd-interactive）：{{v0}}", "t0504": "已從 strict 列表移除救援用户：{{v0}}", "t0505": "{{v0}} 個用户將要求 publickey+TOTP、关闭 password", "t0506": "管理檔：{{v0}}", "t0507": "已安装 {{v0}} 並嘗試 reload sshd", "t0508": "安装／sshd -t 失败：{{v0}}", "t0509": "PAM 預覽會寫管理檔：{{v0}}", "t0510": "chown 可能失败：{{v0}}", "t0511": "警告：期望 mode 400（stat: {{v0}}）", "t0512": "PAM 片段（管理檔）：{{v0}}", "t0513": "sshd 提示（管理檔）：{{v0}}", "t0514": "scratch（只此一次回應）：{{v0}} — 請離線保存", "t0515": "pam.d/sshd 已引用：{{v0}}", "t0516": "用户 {{v0}} 已有 SSH 2FA（{{v1}}）。先 disable/retire。", "t0517": "已產生 secrets master key：{{v0}}", "t0518": "chown 可能失败：{{v0}}", "t0519": "ssh 失败：{{v0}}", "t0520": "已產生 master key：{{v0}}（請一併备份）", "t0521": "已產生 master key：{{v0}}", "t0522": "已有相同 fingerprint：{{v0}} ({{v1}})", "t0523": "已寫 CF-only UFW 腳本：{{v0}}", "t0524": "保留埠：{{v0}}", "t0525": "CF IPv4 段：{{v0}} 個", "t0526": "CF IPv6 段：{{v0}} 個", "t0527": "ufw 腳本失败：{{v0}}", "t0528": "auth 失败 IP：{{v0}}", "t0529": "Top IP 樣本 {{v0}} 個", "t0530": "威脅分 {{v0}} · {{v1}}", "t0531": "自動防護檔 → {{v0}}{{v1}}", "t0532": "自動切換防護檔：{{v0}}", "t0533": "SSH 失败×{{v0}}", "t0534": "auth 失败來源 {{v0}} IP", "t0535": "請求×{{v0}}", "t0536": "掃描×{{v0}}", "t0537": "批量封禁 {{v0}}/{{v1}}", "t0538": "完成 {{v0}} 個 IP：成功 {{v1}}", "t0539": "熔斷：本小時已 auto-ban {{v0}} 次", "t0540": "熔斷：本小時已達上限 {{v0}}", "t0541": "自動 ban {{v0}} 個 IP", "t0542": "无法解析 zone {{v0}}（HTTP {{v1}}）", "t0543": "計劃：將 {{v0}} security_level → {{v1}}", "t0544": "模擬：{{v0}} → security_level={{v1}}", "t0545": "本小時已達上限（{{v0}}）", "t0546": "本小時 {{v0}} 次", "t0547": "緊急檔需 confirm=\"{{v0}}\"", "t0548": "已寫 Nginx 限速：{{v0}}", "t0549": "已注入 {{v0}} 個 vhost 限速標記", "t0550": "作用中防護檔 → {{v0}}", "t0551": "自動 ban → {{v0}}（{{v1}} / {{v2}}）", "t0552": "应用防護檔：{{v0}}", "t0553": "fail2ban 失败：{{v0}}", "t0554": "ufw 失败：{{v0}}", "t0555": "封禁 {{v0}}", "t0556": "ufw delete 失败：{{v0}}", "t0557": "解封 {{v0}}", "t0558": "略過 {{v0}}：{{v1}}", "t0559": "已注入限速到 {{v0}} 個 vhost", "t0560": "cluster_size={{v0}} < 登記节点 {{v1}}", "t0561": "只有 {{v0}} 個节点在 cluster", "t0562": "probe 不支援 {{v0}}", "t0563": "mysql/mariadb 查詢失败：{{v0}}", "t0564": "SHOW REPLICA/SLAVE 失败：{{v0}}", "t0565": "SHOW MASTER 失败：{{v0}}", "t0566": "replica 應為 recovery，實際={{v0}}", "t0567": "primary 不應 recovery，實際={{v0}}", "t0568": "replica 異常 role={{v0}}", "t0569": "期望 master，實際 role={{v0}}", "t0570": "{{v0}} 個產物檔 · {{v1}}", "t0571": "tar 失败：{{v0}}", "t0572": "已打包 {{v0}}（{{v1}} bytes）", "t0573": "{{v0}} 個 peer 目標", "t0574": "{{v0}}: identity {{v1}} 不可用 — 改用默认 key", "t0575": "{{v0}}: ssh mkdir 失败 {{v1}}", "t0576": "{{v0}}: 本地缺 {{v1}}", "t0577": "{{v0}}/{{v1}}: scp 失败 {{v2}}", "t0578": "{{v0}} 個 agent · op={{v1}}", "t0579": "{{v0}}: enqueue 失败 {{v1}}", "t0580": "未知拓撲 {{v0}}", "t0581": "本機 Galera conf（{{v0}}）", "t0582": "在 {{v0}} 安装 conf 並 join（手動 / SSH / fleet）", "t0583": "install conf → systemctl restart mariadb（非 bootstrap 节点）", "t0584": "找不到 conf 產物：{{v0}}", "t0585": "本機 apply 不支援 {{v0}}", "t0586": "已安装系統 drop-in：{{v0}}", "t0587": "写入系統 conf 失败：{{v0}}", "t0588": "galera_new_cluster 失败：{{v0}}", "t0589": "已 systemctl restart {{v0}}（從庫/slot/sentinel 後續步驟見 scripts/）", "t0590": "已 systemctl restart {{v0}}", "t0591": "ssh probe 失败：{{v0}}", "t0592": "replica probe 失败：{{v0}}", "t0593": "primary probe 失败：{{v0}}", "t0594": "全部 {{v0}} 节点 probe OK · size={{v1}}", "t0595": "全部 {{v0}} 节点 probe OK", "t0596": "會安装到 {{v0}} 並 {{v1}}", "t0597": "scp 失败 {{v0}}", "t0598": "install conf 失败：{{v0}}", "t0599": "conf 已寫但 restart {{v0}} 失败", "t0600": "已寫 {{v0}}${restart ? ", "t0601": "不支援的引擎：{{v0}}", "t0602": "不支援的集群類型：{{v0}}", "t0603": "已嘗試停止 {{v0}} 個项目 unit（ok-ish {{v1}}）", "t0604": "部分 stop 非零 exit（共 {{v0}}）— 仍繼續 dump", "t0605": "與 {{v0}} 共用同一 RDB（略過重複 dump）", "t0606": "打包完成 → {{v0}}", "t0607": "已创建用户 {{v0}} uid={{v1}}", "t0608": "用户已存在 {{v0}}", "t0609": "useradd 失败: {{v0}}", "t0610": "chown 失败: {{v0}}", "t0611": "home 不存在，略過 chown: {{v0}}", "t0612": "dump 檔不存在或空: {{v0}}", "t0613": "RDB 不存在: {{v0}}", "t0614": "已還原 RDB → {{v0}}", "t0615": "複製 RDB 失败: {{v0}}", "t0616": "redis 启动/ping: {{v0}}", "t0617": "提示：{{v0}} 不存在 — dump 應在 dataDir 隨 rsync 到達（dumpRelPath）", "t0618": "无法解析目標 sha256: {{v0}}", "t0619": "ysk.json sha256 一致 {{v0}}…", "t0620": "ysk.json 不一致 local={{v0}} remote={{v1}}", "t0621": "本機 dataDir 不存在: {{v0}}", "t0622": "dataDir 不存在: {{v0}}", "t0623": "略過不存在的 home: {{v0}}", "t0624": "home 已在 dataDir 內，隨 dataDir 傳輸: {{v0}}", "t0625": "rsync home 失败 {{v0}}", "t0626": "transfer 中止：home rsync 失败 {{v0}}", "t0627": "略過不存在: {{v0}}", "t0628": "transfer 完成 → {{v0}}:{{v1}}", "t0629": "项目 {{v0}} home 不存在: {{v1}}", "t0630": "项目 {{v0}} 綁定 bind_ip={{v1}} — 遷移後可能需清空（新機 IP 不同）", "t0631": "项目 {{v0}} home 非標準路径: {{v1}}", "t0632": "磁碟有孤立 home（store 無對應）: {{v0}}", "t0633": "Maildir 不存在: {{v0}}", "t0634": "來源缺 {{v0}} — 无法傳輸到目標機", "t0635": "无法探测 {{v0}}", "t0636": "來源 {{v0}} · {{v1}}", "t0637": "项目 {{v0}} · 信箱 {{v1}} · DB {{v2}} · Redis {{v3}}", "t0638": "需安装软件 {{v0}} 项 · homes {{v1}}", "t0639": "cutover 主機名 {{v0}}", "t0640": "警告 {{v0}} 則（請審閱）", "t0641": "已產生臨時密钥 {{v0}}", "t0642": "无法產生臨時密钥: {{v0}}", "t0643": "目標未確認写入 authorized_keys: {{v0}}", "t0644": "已在 {{v0}} 安装臨時公鑰（後續改用 key 登入）", "t0645": "删除臨時密钥失败: {{v0}}", "t0646": "{{v0}} 可用", "t0647": "dataDir 不存在: {{v0}}", "t0648": "預估傳輸量 ~{{v0}}", "t0649": "來源可用 {{v0}}（dump 緩衝充足）", "t0650": "來源磁碟不足：可用 {{v0}}，建議 ≥ {{v1}}", "t0651": "盤點警告 {{v0}} 則（非全部阻塞）", "t0652": "SSH 连接 {{v0}}", "t0653": "目標用户 {{v0}} 非 root（MVP 需要 root）", "t0654": "不支援的 OS（{{v0}}）；需要 Debian/Ubuntu", "t0655": "目標可用 {{v0}} ≥ 需求 {{v1}}", "t0656": "目標磁碟不足：可用 {{v0}}，需要約 {{v1}}", "t0657": "目標已有 {{v0}}/ysk.json — 拒絕覆蓋（需 forceWipeTarget）", "t0658": "目標目录存在但無 ysk.json: {{v0}}", "t0659": "目標目录將创建: {{v0}}", "t0660": "時鐘偏差 {{v0}}s", "t0661": "時鐘偏差 {{v0}}s ≥ 120s（影響 TLS/TOTP）", "t0662": "项目 {{v0}} 來源 bind_ip={{v1}} — 新機應改為空（全接口）", "t0663": "已清空 {{v0}} 個 project.bind_ip", "t0664": "无法 persist bind_ip 修正: {{v0}}", "t0665": "nginx sync 例外: {{v0}}", "t0666": "私鑰不存在: {{v0}}", "t0667": "identity {{v0}} 不可用", "t0668": "SSH 失败 exit={{v0}}: {{v1}}", "t0669": "本地路径不存在: {{v0}}", "t0670": "rsync 失败 exit={{v0}}: {{v1}}", "t0671": "Redis RDB 已写入 {{v0}}（--rdb）", "t0672": "--rdb 失败: {{v0}}", "t0673": "BGSAVE 失败: {{v0}}", "t0674": "Redis RDB 已複製 {{v0}} → {{v1}}（BGSAVE）", "t0675": "无法取得 Redis RDB（src={{v0}}）", "t0676": "{{v0}} 期望 {{v1}} 實際 {{v2}}", "t0677": "來源 home 本就不存在，略過: {{v0}}", "t0678": "home 缺失 {{v0}}", "t0679": "來源 Maildir 本就不存在: {{v0}}", "t0680": "maildir 缺失 {{v0}}", "t0681": "ysk.json fingerprint 已變（可能 reapply 寫回）local≠source", "t0682": "readiness 错误: {{v0}}", "t0683": "DNS cutover：將以下 A/AAAA 指向新 IP → {{v0}}{{v1}}", "t0684": "verify 失败：{{v0}} 項 mismatch", "t0685": "verify 通過（mismatches={{v0}}）", "t0686": "无效 target: {{v0}}（需要 root@host 或 host）", "t0687": "找不到 job {{v0}}", "t0688": "手動：在目標执行 YSK_EXECUTE=1 ysk-server migrate post --job {{v0}} --data-dir {{v1}}", "t0689": "整機遷移完成 → {{v0}}", "t0690": "cutover 主機名: {{v0}}", "t0691": "遠端 post 完成 @ {{v0}}", "t0692": "找不到 job {{v0}}（確認 dataDir 已 rsync）", "t0693": "遠端未回報成功標記 ({{v0}})", "t0694": "bootstrap 完成 → {{v0}}", "t0695": "非關鍵失败: {{v0}}", "t0696": "不支援的 mode：{{v0}}", "t0697": "找不到 edge 节点：{{v0}}", "t0698": "节点 {{v0}} 需有 edge（或 origin）角色", "t0699": "不支援的 DNS 策略：{{v0}}", "t0700": "不支援的 SSL mode：{{v0}}", "t0701": "CDN 站點上限 {{v0}}", "t0702": "origin shield 节点不存在：{{v0}}", "t0703": "edges: {{v0}} 個", "t0704": "origin URL（回源）: {{v0}}", "t0705": "已更新既有 CDN 站點 {{v0}}", "t0706": "已创建 CDN 站點 {{v0}}", "t0707": "origin shield：本 edge 回源經 shield {{v0}} → {{v1}}", "t0708": "origin.kind=project 但未提供 projectOriginUrl — 使用佔位 {{v0}}", "t0709": "edge {{v0}} ({{v1}}): planned（未 fan-out — PR-C3）", "t0710": "edge {{v0}}: 节点缺失", "t0711": "已写入 managed nginx：{{v0}}", "t0712": "已写入 edge 模板：{{v0}}", "t0713": "本機 nginx -t 失败（proxy_cache_path 可能需在 http{}）：{{v0}}", "t0714": "使用 certId={{v0}} domain={{v1}}", "t0715": "certId={{v0}} 文件不存在：{{v1}}", "t0716": "找不到 certId={{v0}}", "t0717": "使用 dataDir 证书 {{v0}}", "t0718": "使用本機 Let’s Encrypt {{v0}}", "t0719": "scp 失败 {{v0}}", "t0720": "mkdir 失败 {{v0}}", "t0721": "certbot 失败：{{v0}}", "t0722": "originShieldNodeId={{v0}} 不存在 — 忽略 shield", "t0723": "{{v0}}: 有 SSH 目標 — 使用 SSH 同步应用（略過 fleet 佇列）", "t0724": "fleet 无法入佇列（blocked={{v0}}）— 提供 enqueue 或改用 SSH", "t0725": "fleet 已入队列 {{v0}} edge — queued ≠ agent 已 nginx reload；查看 Agents 指令纪录", "t0726": "fleetAgentId={{v0}} — 需要控制面 fleet enqueue（API 會注入）；或改填 SSH 做同步应用", "t0727": "找不到 conf：{{v0}}", "t0728": "讀 conf 失败：{{v0}}", "t0729": "fleet enqueue 失败：{{v0}}", "t0730": "nginx -t 失败：{{v0}}", "t0731": "SSH mkdir 失败：{{v0}}", "t0732": "scp 失败：{{v0}}", "t0733": "remote reload 失败：{{v0}}", "t0734": "fleetAgentId={{v0}} — purge 需 fleet enqueue 或 SSH", "t0735": "enqueue 失败：{{v0}}", "t0736": "purge 失败：{{v0}}", "t0737": "remote purge 失败：{{v0}}", "t0738": "fleet purge 已入佇列 {{v0}} — queued ≠ edge 已 purge", "t0739": "geo {{v0}}: 未知节点 {{v1}}", "t0740": "weighted 縮放至 maxRr={{v0}}（總副本 {{v1}}）", "t0741": "minHealthyEdges={{v0}} 但僅 {{v1}} 個健康 edge — 防全滅：改用全部有 IP 的 edge（含 offline）", "t0742": "edge {{v0}} 不存在 — 略過", "t0743": "probe {{v0}} 例外：{{v1}}", "t0744": "已綁定 zoneId={{v0}} ({{v1}})", "t0745": "名稱 {{v0}} 已有 user 管理記錄 {{v1}} 筆 — CDN 仍写入 managedBy=cdn（可能並存；請檢查 zone）", "t0746": "geo subdomain {{v0}}: 無 IP — 略過", "t0747": "access_log 抽樣 {{v0}}（{{v1}} 個 cache status token）", "t0748": "读取本地 log {{v0}}", "t0749": "cache 目录 {{v0}} ≈ {{v1}} bytes（非命中率）", "t0750": "cache 抽樣僅前 {{v0}}/{{v1}} 個站點", "t0751": "IPv4 无效：{{v0}}", "t0752": "IPv6 无效：{{v0}}", "t0753": "CDN 节点上限 {{v0}}", "t0754": "HTTP {{v0}}（視為不健康）{{v1}}", "t0755": "HTTP 探活失败：{{v0}}", "t0756": "TCP {{v0}}:443/80 皆无法连接", "t0757": "探活 {{v0}}/{{v1}} 健康", "t0758": "list-units 失败：{{v0}}", "t0759": "共 {{v0}} 個 service units", "t0760": "已改用 unit {{v0}}", "t0761": "輸出截斷至 {{v0}} bytes", "t0762": "journalctl · {{v0}} 行", "t0763": "已 vacuum：{{v0}}", "t0764": "vacuum 失败：{{v0}}", "t0765": "應用層 filter：{{v0}} 行匹配", "t0766": "文件 {{v0}} · {{v1}} bytes · 顯示 {{v2}} 行", "t0767": "路径不在 allowlist：{{v0}}", "t0768": "Journal 磁碟偏高：≈{{v0}} MB（閾值 {{v1}} MB）", "t0769": "项目 {{v0}} · {{v1}} 個 log 檔（含子目录）", "t0770": "已匯出 {{v0}} 行（{{v1}}）", "t0771": "未到時間窗 {{v0}}", "t0772": "每月（DB-IP City Lite {{v0}}；失败試上月）", "t0773": "每月 fallback {{v0}}", "t0774": "政策：{{v0}} · 國 {{v1}} · 省 {{v2}} · 市 {{v3}}{{v4}} · ASN {{v5}}", "t0775": "文件過細（{{v0}} B），可能下載失败", "t0776": "略過 {{v0}} fallback（已成功）", "t0777": "已更新 {{v0}}（{{v1}} B）", "t0778": "更新失败 {{v0}}：{{v1}}{{v2}}", "t0779": "找不到设置檔：{{v0}}", "t0780": "无法解析设置檔：{{v0}}", "t0781": "找不到证书：{{v0}}", "t0782": "dry-run：未 systemctl {{v0}}。加 --execute 且 YSK_EXECUTE=1 + root 先真正执行", "t0783": "找不到 job {{v0}}", "t0784": "Web UI: 找不到 (build apps/web or set YSK_WEB_ROOT)\\n", "t0785": "DNS zone 已创建（draft）: {{v0}}", "t0786": "DNS zone 创建失败: {{v0}}", "t0787": "邮件域名已登記: {{v0}}", "t0788": "邮件域名创建失败: {{v0}}", "t0789": "找到 {{v0}} 個可能相關嘅續期 cron", "t0790": "restic {{v0}}/{{v1}} 成功", "t0791": "已確保排程：{{v0}} {{v1}}", "t0792": "设置已存在於 {{v0}}。使用 --force 覆寫。", "t0793": "设置已存在於 {{v0}}", "t0794": "找不到接口 {{v0}}", "t0795": "hostname 失败: {{v0}}", "t0796": "pretty hostname 失败: {{v0}}", "t0797": "timezone 失败: {{v0}}", "tScoreFrom": "分数={{score}} · 由 {{from}} 切换", "appliedTag": "（已应用）", "writtenTag": "（只写文件）", "selfDestMissing": "找不到运行中安装目录（systemd ExecStart 或运行中 cli.js）", "selfDestUnwritable": "无法写入运行中安装目录 {{v0}}", "selfApplied": "已将 {{v0}} 应用到 {{v1}}", "selfVerifyFail": "应用后版本文件未包含 {{v0}}", "selfDownloadFail": "无法下载或解压官方套件 {{v0}}：{{v1}}", "selfOverlayFail": "官方套件未能应用到运行中目录：{{v0}}", "selfUpgradeHint": "面板套用失败。请以 root 执行：curl -fsSL https://raw.githubusercontent.com/yanshekki/ysk-server/main/install.sh | bash -s -- --upgrade" }, "tpl": { "deleted": "已删除 {{name}}", "removed": "已移除 {{name}}", "failedDetail": "失败：{{detail}}", "failedColon": "失败: {{detail}}", "actionFailed": "{{action}} 失败: {{detail}}", "restartFailed": "重启失败：{{detail}}", "chownFailed": "chown 失败：{{detail}}", "available": "可用：{{detail}}", "supportedNotProbed": "支持 {{name}} — 尚未探测到", "wrote": "已写 {{path}}", "wroteSettings": "已写入设置 {{path}}", "wroteManaged": "已写入管理文件 {{path}}", "copyFailed": "复制失败：{{detail}}", "copyFailed2": "复制失败: {{detail}}", "reloadFailed": "reload 失败：{{detail}}", "reloadFailed2": "reload 失败: {{detail}}", "nginxReloadFailed": "nginx reload 失败：{{detail}}", "nginxTestFailed": "nginx -t 失败: {{detail}}", "nginxConfigFailed": "Nginx 配置检查失败：{{detail}}", "psqlFailed": "psql 失败：{{detail}}", "redisCliFailed": "redis-cli 失败：{{detail}}", "restartFailed2": "restart 失败：{{detail}}", "missing": "缺少 {{name}}", "project": "项目 {{name}}", "logNotFound": "找不到日志：{{path}}", "clusterNotFound": "找不到集群：{{id}}", "domainInvalid": "域名无效：{{domain}}", "exported": "已导出 {{path}}", "reenabledLink": "已重新启用连接 {{name}}", "installed": "已安装", "missingDataDir": "缺少 dataDir", "installIncomplete": "安装未完成", "noPackages": "无软件包", "recentlyUpdated": "最近已更新", "needRootRead": "需 root 读取", "reenabledPersist": "已重新启用连接（重启仍在）", "runtimeOnlyHint": "（重启可能消失；要持久请用「保存」）", "statusWrittenPartial": "状态：written/partial", "keyMissingOrNotDeleted": "key 不存在或未删除", "passwordCryptStored": "密码已以 crypt 哈希存储（不存明文）", "skipInvalidUsername": "跳过无效用户名", "digNoAnswer": "dig 无答案（NXDOMAIN 或空）", "ipAddrAddFailed": "ip addr add 失败：{{detail}}", "ipAddrDelFailed": "ip addr del 失败：{{detail}}", "connUpWarn": "connection up 警告：{{detail}}", "ntpEnableFailed": "启用 NTP 失败: {{detail}}", "cancelFailed": "取消失败: {{detail}}", "powerCmdFailed": "电源指令失败: {{detail}}", "reniceFailed": "renice 失败：{{detail}}", "pgIncludeHint": "请将此文件 include 到 postgresql.conf 或在应用时复制", "none": "无", "success": "成功", "on": "开", "off": "关", "continueOp": "继续操作", "unavailable": "不可用", "unknownError": "未知错误", "noParen": "(无)", "keepOldDb": "（保留旧库）", "ufwNotDetected": "系统未检测到 UFW", "fail2banStartHint": "可到 fail2ban 页启动", "hasExecuteNotRoot": "有 EXECUTE 但非 root", "notRootTarget": "非 root（目标 useradd/apt 会 blocked）", "reapplyDone": "reapply 关键步骤完成", "someFailed": "有失败 — 请查看 results", "securityDesc": "密码、TLS、本机限制", "yskControlPlane": "YSK 控制面", "sslDistributeNote": "SSL distribute：edge 上的 cert ≠ 浏览器信任链完整；请 dig / curl -vI https:// 验证", "autoNever": "永不自动", "autoManualEmergency": "只人手 EMERGENCY", "probeMech": "外网 TCP、面板 req/min、TCP inuse、fail2ban、UFW", "probeTunable": "升／降档门槛", "priorityBlockers": "优先处理 {{count}} 项阻挡：{{list}}", "readinessNotProduction": "readiness 未达 production：{{list}}", "noRestart": "不 restart", "cityPolicyOff": "（市政策关）", "pidStarted": "进程已启动 pid={{pid}} {{extra}}", "pidUser": "（user={{user}}）", "pidDegraded": "（degraded）", "killFailed": "kill -s {{sig}} 失败：{{detail}}", "routeAdded": "已加入路由 {{dst}}{{via}}{{dev}}", "dnsWritten": "已写入 {{conn}}：DNS {{dns}}{{search}}", "peerInstalled": "已安装到 {{dest}}{{restart}}" }, "installedTool": "已安装（工具）", "cron": { "preserveHostLines": "已保留主机 crontab 中 {{count}} 行非 YSK 任务（不会整份覆盖）。", "noHostLinesOrEmpty": "主机 crontab 无额外非 YSK 行（或空白）。", "installReplacesYskOnly": "安装只更新带 YSK 标记的任务；其他主机任务已合并保留。", "hostScanNeedRoot": "读取其他用户 crontab 需要控制面以 root 运行；目前只能列出控制面自身 crontab。", "hostScanSkipUser": "跳过用户 {{user}}（无权读取）", "hostUserInvalid": "crontab 用户无效。", "hostScheduleInvalid": "主机 cron 排程无效。", "hostLineNotJob": "该 crontab 行不是工作。", "hostLineMissing": "找不到对应的 crontab 行（主机 crontab 可能已变更）。", "hostLineDuplicate": "该工作行出现 {{count}} 次；请先改成唯一的一行。", "hostReadFailed": "无法读取 crontab：{{detail}}", "hostWriteFailed": "写入 crontab 失败：{{detail}}", "hostRewriteNeedExecute": "写入主机 crontab 需要 root 与 YSK_EXECUTE=1。目前只是预览。", "hostRewriteNeedRoot": "修改其他用户的 crontab 需要控制面以 root 执行。", "hostPreview": "下一行：{{line}}", "hostPreviewDelete": "下一步：移除该行。", "hostRewritten": "已写入 {{user}} 的 crontab。", "hostRunNeedExecute": "试跑主机 cron 指令需要 YSK_EXECUTE=1。", "hostRan": "已用 {{user}} 试跑主机 cron 指令。", "hostAdoptNeedExecute": "把主机行纳入面板需要 YSK_EXECUTE=1（否则安装时会重复）。", "hostAdopted": "主机行已标 # ysk:{{id}} 并登记到面板。", "hostConfirmMismatch": "确认内容必须与指令相同。", "hostAdoptOnlyInstallUser": "只能纳入“安装到系统”会写入的 crontab（root／本进程用户）。其他用户安装时会重复。", "hostAdoptEnableFirst": "请先启用该主机行，再纳入面板。", "hostPercentNewline": "crontab 把未跳脱的 % 当成换行。日期格式请写 \\%Y（或不要用 %）。" }, "dbBrowser": { "pmaInstalled": "已安装 phpMyAdmin → {{path}}", "pmaConfigWritten": "已写入 phpMyAdmin 配置与临时目录（Cookie 登录；上 HTTPS 更稳）", "pmaExtractFailed": "phpMyAdmin 下载或解压失败：{{detail}}", "projectCreated": "已创建项目 {{id}}（{{name}}）" }, "firewallAllow": { "already": "{{port}}/{{proto}}{{from}}：规则已存在", "partial": "部分成功：{{ok}} 成功、{{fail}} 失败", "fromLabel": "（来源 {{from}}）" }, "firewallDeleteByComment": { "removed": "已移除 {{n}} 条符合 {{prefix}} 的防火墙规则", "none": "没有符合 {{prefix}} 的防火墙规则" }, "serviceExposure": { "needsDecision": "{{service}}：请确认是否对外暴露此服务", "private": "{{service}}：保持仅本机（未开放公网端口）", "restrictedEmpty": "受限模式需要至少一个允许的 IP／网段", "badCountry": "无效国家代码：{{cc}}", "zoneDownloadFail": "下载 {{cc}} 国家网段失败：{{detail}}", "zoneEmpty": "{{cc}} 国家网段文件为空", "zoneDownloaded": "已下载 {{cc}} 共 {{n}} 个 CIDR", "zoneMissing": "缺少 {{cc}} 网段文件 — 请放到 geoip/country-zones 或允许下载", "zoneCidrCap": "国家 CIDR 已上限至 {{n}} 条", "geoNeedExecute": "国家允许列表需要 YSK_EXECUTE", "geoNeedRoot": "国家允许列表需要 root", "geoNoCidrs": "未加载任何国家 CIDR — 无法应用地区限制", "ipsetMissing": "未安装 ipset — 已跳过国家允许列表", "ipsetApplyFail": "ipset／iptables 应用失败：{{detail}}", "ipsetApplied": "已应用国家允许集合 {{set}}（{{countries}}，{{n}} 个 CIDR）", "ipsetCleared": "已清除国家 ipset {{set}}", "geoBestEffort": "国家过滤为 best-effort（ipset）；云安全组须另行设置" }, "goLive": { "deployIncomplete": "上线：部署未完成", "deployFailed": "上线部署失败：{{detail}}", "publishIncomplete": "上线：发布 Nginx 未完成", "publishFailed": "上线发布失败：{{detail}}" }, "ops": { "projectNameExists": "项目名称已存在：{{name}}", "sslNotReady": "SSL 未就绪：域名 {{domain}} 尚无可用证书。", "sslNotReadyDetail": "SSL 未就绪：域名 {{domain}} 尚无可用证书（面板申请／上传或 Let’s Encrypt live 路径）。", "sslGoToPage": "请先到「SSL 证书」申请或上传，再发布 + SSL。", "sslRejectWrite": "已拒绝写入 SSL nginx conf，避免 nginx -t 因缺文件失败。", "installAborted": "安装已中止（客户端断线或取消）", "phpPackagesPartialFail": "部分 PHP 软件包安装失败：{{list}}（核心 CLI 可能仍可用）", "pdnsBindConflict": "PowerDNS 无法绑定 0.0.0.0:53（端口被占用），多与 systemd-resolved 冲突。请改绑公网 IP（面板：修复 PowerDNS）。" }, "webmail": { "notInstalled": "尚未安装网页邮件；请勾选下载后再执行", "needExecute": "下载网页邮件需要系统变更权限（YSK_EXECUTE）及外网", "needExecuteBeforeCreate": "未开系统变更权限前不会建立半成品项目", "notRoundcubeTree": "文档根目录不是完整 Roundcube（仍可能是 php-hello）", "notSnappyTree": "文档根目录不是完整 SnappyMail", "installIncompleteHint": "项目已存在但网页邮件未装好 — 请开 EXECUTE 后按「重新安装／升级」", "extractFailed": "{{tool}} 下载或解压失败：{{detail}}", "roundcubeInstalled": "已安装 Roundcube {{version}} → {{path}}", "roundcubeReuse": "沿用已安装 Roundcube → {{path}}", "roundcubeConfigWritten": "已写入 Roundcube 配置（SQLite、IMAP 993、SMTP 587）", "snappyInstalled": "已安装 SnappyMail {{version}} → {{path}}", "snappyReuse": "沿用已安装 SnappyMail → {{path}}", "snappyAdminHint": "首次打开请完成 SnappyMail 管理员初始化，并添加本机 IMAP 域名", "imapSmtpHint": "IMAP {{imap}}:993 · SMTP {{smtp}}:587（登录用邮箱完整地址与密码）", "projectCreated": "已创建 PHP 项目 {{name}}（{{tool}}，{{id}}）", "domainRequired": "需要网页邮件主机名", "openHint": "以邮箱地址与密码登录；上线后请到项目页或本页打开网址", "sslHint": "建议为 {{domain}} 申请 Let’s Encrypt（SSL 页）", "bootstrapLegacyHint": "Bootstrap 未注入项目服务，已写 dataDir 骨架；面板请用「创建并上线」走 PHP 项目路径", "ssoPluginInstalled": "已安装 SSO 插件 → {{path}}", "forceHttpsOn": "Roundcube force_https 已开启（需已有 HTTPS）", "forceHttpsOff": "force_https 关闭 — 请在 SSL 页签发后重装并勾选强制 HTTPS", "reinstallHint": "项目已存在：请用「重新安装／升级」或传 reinstall:true", "reinstalling": "重新安装网页邮件到项目 {{name}}（{{id}}）", "reinstallStart": "开始升级／重装（目标版本相关：{{version}}，项目 {{id}}）", "projectNotFound": "找不到网页邮件项目", "snappyAdminOnce": "SnappyMail 管理员账号 {{user}} — 密码只显示一次（见结果／ONCE 文件）", "snappyAdminPassword": "SnappyMail 管理员密码（请立即复制）：{{password}}", "publicHtmlStub": "文档根目录仍是 SnappyMail／RainLoop 外层 stub。HTTP 必须指向 public_html 应用树 — 请应用此修复后重新安装网页邮件。", "goLiveFailed": "网页邮件文件已安装，但项目上线／部署健康检查失败 — 请展开详情。", "forceHttpsNeedsSsl": "已开启 Roundcube 强制 HTTPS：请先为此主机名绑定 SSL，否则公网跳转可能失败；未绑证前可取消勾选。", "roundcubePublicHtmlDocRoot": "HTTP 文档根已设为 Roundcube public_html（{{path}}）", "docRootUpdated": "项目文档根已更新为 {{path}}", "docRootUpdateFailed": "无法更新项目文档根：{{detail}}", "sqliteSchemaReady": "已初始化 Roundcube SQLite schema", "sqliteSchemaFailed": "Roundcube SQLite schema 初始化失败：{{detail}}", "snappyFullEmailLogin": "邮箱登录须用完整电邮（user@domain），不要只用 local-part", "removedBogusPublicHtml": "已删除残留 public_html（php-hello），避免 webmail 指错目录", "snappyDocRoot": "SnappyMail HTTP 文档根：{{path}}", "phpHelloStillPresent": "安装后站点根仍是 php-hello（YSK PHP OK）— webmail 未成功替换" }, "vpn": { "needInstall": "请安装 {{engine}}", "openvpnComing": "OpenVPN 完整流程將於後續版本提供。", "outlineComing": "Outline／Shadowsocks 將於後續版本提供。", "needExecuteServer": "VPN 伺服器設定需 root 與 YSK_EXECUTE=1。", "serverStopped": "已停止 {{engine}} 伺服器。", "serverStopFailed": "無法停止 {{engine}} 伺服器：{{detail}}", "needExecuteClient": "VPN 客戶端連線需 root 與 YSK_EXECUTE=1。", "keygenFailed": "WireGuard 金鑰產生失敗（是否已安裝 wg？）。", "serverKeysCreated": "已建立 WireGuard 伺服器金鑰。", "applyFailed": "套用 WireGuard 設定失敗：{{detail}}", "serverActive": "已套用 WireGuard 伺服器（UDP {{port}}）。", "serverMissing": "尚未初始化 WireGuard 伺服器 — 請先啟動伺服器。", "peerCreated": "已建立客戶端「{{name}}」。", "peerNotFound": "找不到客戶端。", "peerRemoved": "已移除 {{name}}。", "peersSynced": "已在运行中的 WireGuard 界面重新载入对等端，未重启服务器。", "setEndpointHint": "請設定公開端點（host:port），手機客戶端才能連上。", "invalidConf": "此文件不是有效的 VPN 客户端配置。请使用 WireGuard 或 OpenVPN 客户端配置文件。", "clientImported": "已匯入設定檔「{{name}}」。", "profileNotFound": "找不到客戶端設定檔。", "clientUpFailed": "連線失敗：{{detail}}", "clientUp": "已連線：{{name}}", "clientDown": "已斷線：{{name}}", "clientDeleted": "已刪除設定檔：{{name}}", "autostartOn": "已開機自動連：{{name}}", "autostartOff": "已關閉開機自動連：{{name}}", "ovpnPkiStart": "正在生成 OpenVPN PKI（DH 参数可能需一分钟）…", "ovpnPkiDone": "OpenVPN PKI 已就绪。", "ovpnServerActive": "已套用 OpenVPN 服务器（{{proto}} {{port}}）。", "invalidOvpn": "OpenVPN 配置应包含 client／remote。", "ssHonest": "使用 shadowsocks-libev ss-server — 非完整 Outline Manager。", "ssKeysCreated": "已生成 Shadowsocks 服务器密码。", "ssServerActive": "已套用 Shadowsocks 服务器（端口 {{port}}）。", "ssSharedPassword": "所有 ss:// 标签共用同一服务器密码（重新启动服务器可轮换）。", "ssPackageYielded": "已停用并屏蔽 Debian 默认 shadowsocks-libev（仅本机），以便 YSK 在本机绑定公开 {{port}}。", "ssEndpointAutofilled": "公开端点已设为 {{endpoint}}。", "ssClientsRewritten": "已按当前端点/密码重写 {{n}} 个客户端 ss://。", "ssUfwOpened": "已开放 UFW {{port}}/tcp+udp（若已安装 ufw）。", "endpointAutofilled": "公开端点已设为 {{endpoint}}。", "ovpnClientsRewritten": "已更新 {{n}} 个 OpenVPN 客户端配置的 remote（下载/QR 会用新地址）。", "accessFullNat": "已开全网上网（IP 转发 + NAT）", "accessLanOnly": "已设只连区域（无外网 NAT）", "accessReconnectHint": "已连接的客户端请断开再连，才会使用新路由", "ovpnNatDurable": "安装 OpenVPN NAT/转发以便重新启动 (systemd ExecStartPost)。", "clientFullTunnelProtect": "检测到全隧道客户端 (AllowedIPs 0.0.0.0/0)。应用主机保护，以便面板/SSH 回复保留在 LAN NIC 上。", "clientFullTunnelHint": "提示：仅对于分割访问，请在conf中将AllowedIPs设置为VPN/LAN CIDR（而不是0.0.0.0/0），然后重新连接。" }, "vnc": { "needInstall": "请安装 {{stack}}", "needExecute": "未启用 YSK_EXECUTE — 无法安装软件包或创建 Linux 用户。", "needRoot": "非 root — 无法 useradd 或应用 vncserver。", "hostnameResolves": "主机名 {{hostname}} 可解析。", "hostnameUnresolvable": "此主机无法解析自己的主机名（{{hostname}}）。修好 /etc/hosts 之前，VNC 工作阶段会启动失败。", "hostnameAlreadyResolves": "主机名 {{hostname}} 已可解析 — 未改 /etc/hosts。", "hostnameWouldAppend": "将会附加到 /etc/hosts：{{line}}", "hostnameAppended": "已附加到 /etc/hosts：{{line}}", "hostnameAppendFailed": "无法写入 /etc/hosts：{{detail}}", "hostnameAliasPresent": "主机名 {{hostname}} 已在 /etc/hosts 列为完整别名 — 未再附加。", "hostnameStillUnresolvable": "已写入 /etc/hosts，但 {{hostname}} 仍无法解析。请确认 nsswitch 的 hosts 包含 files。", "skipStartHostname": "未启动 display — 请先修好主机名解析。", "novncAssetsOnly": "已找到 noVNC 网页资源；仍缺 websockify 可执行文件。", "viewerNeedExecute": "要在浏览器打开本机 VNC 桌面，需要 root 并启用 YSK_EXECUTE", "browserSessionReady": "浏览器 VNC 会话已就绪：{{name}}", "clientPathUserReachable": "路径：经用户可达端点 — {{name}} → {{target}}（浏览器经面板转发）", "clientPathServerProxy": "路径：经服务器代理 — {{name}} → {{target}}（经本机服务器网络转发）", "clientOpenInBrowserHint": "请在客户端列表点击「在浏览器打开」以使用内嵌 VNC", "probeOk": "可达性正常：控制面可对 {{target}} 打开 TCP", "probeRefused": "{{target}} 拒绝连接（无服务监听）。目标主机的 VNC 是否已启动？", "probeTimeout": "从此服务器连接 {{target}} 超时。请检查防火墙／路由。", "probeDns": "无法解析主机名「{{host}}」。", "probeNet": "从此服务器无法到达 {{target}} 的网络。", "probeFailed": "无法连接 {{target}}：{{detail}}", "probeInvalid": "无效的 VNC 目标 {{host}}:{{port}}", "probeHintUserReachable": "路径为「经用户可达端点」：面板仍须对该公网主机打开 TCP（浏览器本身不能直接使用 RFB）。", "probeHintServerProxy": "路径为「经服务器代理」：目标必须可从此控制面服务器的网络连上。", "connectHostOverride": "服务器代理：显示主机 {{display}}，实际 TCP 连至 {{connect}}", "probeConnectHostHint": "显示目标为 {{display}}，探测／连接地址为 {{connect}}（连接主机覆盖）。", "accountNotFound": "找不到 VNC 账号", "accountExists": "此名稱或 Linux 用戶的 VNC 账号已存在", "accountCreated": "已创建 VNC 账号 {{name}}（{{user}}，display :{{display}}）", "accountUpdated": "已更新 VNC 账号 {{name}}", "accountDeleted": "已删除 VNC 账号 {{name}}", "invalidName": "账号名稱无效", "invalidGeometry": "分辨率无效（例如 1920x1080）", "displayBusy": "Display 编号无效或已被使用", "displayExhausted": "可用 VNC display 编号已用尽", "userWrittenOnly": "Linux 用戶 {{user}} 只記在控制面（需 root + YSK_EXECUTE 才useradd）", "userExists": "Linux 用戶 {{user}} 已存在", "userCreated": "已创建 Linux 用戶 {{user}}", "useraddFailed": "useradd {{user}} 失败：{{detail}}", "userdelBlocked": "无权限刪除 Linux 用戶 {{user}}（需 root + YSK_EXECUTE）", "userAlreadyGone": "Linux 用戶 {{user}} 已不存在", "userdelFailed": "userdel {{user}} 失败：{{detail}}", "userdelLeftover": "面板账号已删，但 Linux 用户 {{user}} 仍在主机。请到用户页或主机再清。", "userDeleted": "已删除 Linux 用戶 {{user}}", "passwordTooShort": "VNC 密碼至少 6 個字符", "passwordWrittenOnly": "密碼只記在控制面（需 root + YSK_EXECUTE 才vncpasswd）", "passwordFailed": "写入 VNC 密碼失败：{{detail}}", "passwordNeedTiger": "找不到 vncpasswd。请先安装 TigerVNC（tigervnc-standalone-server）再设定密码。", "passwordSet": "已為 {{user}} 設定 VNC 密碼", "passwordUpdated": "已更新 {{name}} 的密碼", "passwordMetaOnly": "密碼暂只记元資料，待系统应用", "xstartupWrittenOnly": "未写入 xstartup 到 home（需 root + YSK_EXECUTE）", "xstartupWriteFailed": "无法写入 ~/.vnc/xstartup ({{detail}})。需要 root + YSK_EXECUTE。", "xstartupFailed": "VNC xstartup/桌面启动失败（display :{{display}}，{{detail}}）。可改用 XFCE 配置，或安装 xfce4-terminal/xterm。", "xstartupWritten": "已写入 {{path}}", "sessionStartBlocked": "无权限启动 VNC session（需 root + YSK_EXECUTE）", "sessionStartFailed": "启动 display :{{display}} 失败：{{detail}}", "sessionStartHostname": "启动 display :{{display}} 失败：此主机无法解析自己的主机名。请把主机名写入 /etc/hosts（或修正 DNS）后再启动工作阶段。", "sessionStarted": "已为 {{user}} 启动 :{{display}}（端口 {{port}}）", "sessionStartUnverified": "启动命令成功但 RFB 端口尚未监听", "sessionAlreadyRunning": "{{user}} 的 VNC 已在运行（:{{display}} / 端口 {{port}}）", "vncserverMissing": "未安装 TigerVNC 启动程序（tigervncserver／vncserver）— 请到「安装」页安装", "vncserverWrapperMissing": "检测到 {{found}}，但缺少 tigervncserver／vncserver 包装脚本 — 请重装 tigervnc-standalone-server", "vncPackageWithoutBin": "软件包 tigervnc-standalone-server 已装但找不到启动脚本 — 请重装该包", "needPasswordBeforeStart": "请先设置 VNC 密码（至少 6 个字符）再启动", "displayPortBusy": "Display :{{display}} → 端口 {{port}} 已被占用 — 请先停止其他 session 或改用其他 display", "sessionStartPermission": "启动 display :{{display}} 权限被拒", "staleLockCleared": "已清除 display :{{display}} 残留 lock，重试中", "sessionStopBlocked": "无权限停止 VNC session（需 root + YSK_EXECUTE）", "sessionStopped": "已停止 {{user}} 的 display :{{display}}", "linuxUserKept": "已保留系統上的 Linux 用戶 {{user}}", "novncStartBlocked": "无权限启动 noVNC（需 root + YSK_EXECUTE）", "novncAlreadyRunning": "noVNC 已在端口 {{port}} 运行", "novncStartFailed": "启动 websockify 失败：{{detail}}", "novncStarted": "noVNC 监听 127.0.0.1:{{httpPort}} → RFB {{rfbPort}}", "novncNotRunning": "noVNC 未在运行", "novncStopBlocked": "无权限停止 noVNC（需 root + YSK_EXECUTE）", "novncStopped": "已停止 noVNC 端口 {{httpPort}}", "directNeedsAllBind": "RFB 仅监听 localhost — 外网直连需改 bind 或用隧道", "directOpenFirewall": "直连客户端请放行 TCP {{port}}", "viaServerReady": "noVNC 已就绪 — 打开本机 URL 或用 SSH 隧道", "viaServerStartFirst": "请先启动 noVNC 以经 server 用浏览器连入", "viewTicketIssued": "已发出短期观看 ticket", "invalidPort": "端口号无效", "firewallNeedExecute": "开 UFW 端口需 YSK_EXECUTE", "firewallNeedRoot": "开 UFW 端口需 root", "firewallFailed": "ufw allow 失败：{{detail}}", "firewallOpened": "UFW 已放行 TCP {{port}}", "clientInvalid": "客户端名称与主机必填", "clientNotFound": "找不到客户端配置", "clientUpBlocked": "无权限连接 VNC client（需 root + YSK_EXECUTE）", "clientUpFailed": "客户端连接失败：{{detail}}", "clientViaServerUp": "客户端 {{name}} 已可在浏览器经面板使用 VNC（旧版 websockify 说明已退役）。请点「在浏览器打开」。", "clientDirectUp": "客户端 {{name}} 仅使用浏览器内 VNC（已移除主机 vncviewer 路径）。请在浏览器打开 → {{target}}。", "clientNeedViewer": "桌面版 vncviewer 为可选。请使用「在浏览器打开」的内嵌 VNC 客户端。", "clientDownBlocked": "无权限断开（需 root + YSK_EXECUTE）", "clientDown": "已断开客户端 {{name}}", "clientDeleted": "已删除客户端配置", "sessionStartCwd": "VNC 启动失败：工作目录会话用户无权访问（display :{{display}}）。已改为从 HOME 启动。", "desktopRestarted": "应用桌面配置文件并重新启动会话 ({{desktop}})。重新连接 VNC/noVNC。", "desktopNeedsStart": "桌面配置文件 {{desktop}} 写入 xstartup。启动会话以进行申请。", "linuxUserRolledBack": "VNC 密码失败后已删除遗留 Linux 用户 {{user}}。", "linuxUserOrphan": "VNC 密码失败后无法删除遗留 Linux 用户 {{user}}。" }, "apache": { "needServerName": "需要域名", "siteExists": "站点已存在", "siteNotFound": "找不到站点", "wroteConf": "已写入 {{path}}", "needExecute": "需 YSK_EXECUTE", "settingsWritten": "已写入 Apache 默认", "managedDir": "管理目录 {{path}}", "dryRun": "预演", "copyFailed": "复制失败：{{file}}", "configOk": "configtest 通过", "configFailed": "configtest 失败：{{detail}}", "reloaded": "Apache 已 reload", "reloadFailed": "reload 失败", "skippedOrphans": "已跳过 {{count}} 个未认领 conf", "artifactInvalid": "无效的残留 conf 名称", "artifactOwned": "conf {{file}} 归项目或独立站所有", "artifactNotFound": "找不到残留 conf：{{file}}", "artifactRemoveFailed": "无法删除 {{file}}：{{detail}}", "artifactRemoved": "已删除残留 conf {{file}}", "artifactSystemPending": "已清理 dataDir；系统 Apache 副本需 YSK_EXECUTE/root 才能停用", "artifactSystemDisabled": "已停用系统站点 {{site}}", "artifactSystemFailed": "系统停用失败：{{detail}}", "conflictProjectsOnly": "域名 {{name}} 被多个项目占用 — 请修改其中一个项目域名", "cleanupNothing": "没有可清理的冲突残留 conf", "conflictOwnedKeep": "保留已拥有 conf {{file}}（同域名 {{domain}}）", "retiredOrphan": "已退役残留 conf {{file}}（与 {{domain}} 域名冲突）" }, "btTracker": { "needExecute": "未启用 YSK_EXECUTE — 启动 Tracker 与对外开放端口需要系统变更权限。", "startWithoutExecute": "在未启用 YSK_EXECUTE 下启动 Tracker — 进程可能可监听，但不会自动开放防火墙。", "alreadyRunning": "BitTorrent Tracker 已在本进程运行。", "notRunning": "BitTorrent Tracker 未运行。", "started": "BitTorrent Tracker 正在端口 {{port}} 监听。", "startFailed": "启动 Tracker 失败：{{detail}}", "stopped": "BitTorrent Tracker 已停止。", "maxSeeds": "已达同时做种上限（{{n}}）。", "seedStarted": "已开始为分享 {{id}} 做种。", "seedStopped": "已停止做种。", "seedPending": "做种尚未就绪 — 请启动 Tracker，并在需要时启用 YSK_EXECUTE。", "notSeeding": "控制平面当前未为该分享做种。", "btNeedsTracker": "BT 分享需要运行中的 Tracker。请打开「文件 → BT Tracker」并启动。", "restoreTrackerFailed": "开机还原时未能启动 BT Tracker", "restoreDone": "BT 还原：已做种 {{seeded}}／{{attempted}}（失败 {{failed}}）", "workerMissing": "找不到 detached worker；已改进程内启动（随本进程结束）", "startedDetached": "BT Tracker detached worker 已启动（pid {{pid}}，端口 {{port}}）", "runningDetached": "Tracker 以 detached worker 运行中（pid {{pid}}）", "jobQueued": "BT torrent 创建已排入队列（大型分享）", "jobRunning": "正在创建 BT torrent", "libraryAdded": "已将 {{name}} 加入 WebTorrent 资料库", "libraryInspectFailed": "无法读取此 .torrent 或 magnet", "libraryDup": "资料库已有此 Torrent", "libraryDestBad": "保存位置不是有效的文件路径", "libraryTorrentTooBig": ".torrent 文件大于 8 MiB", "libraryNotFound": "找不到此资料库项目", "libraryPaused": "已暂停", "libraryResumed": "已继续", "libraryRemoved": "已从资料库移除", "libraryFilesRemoved": "已删除下载的文件", "libraryRestoreDone": "资料库还原：已启动 {{started}}/{{attempted}}（失败 {{failed}}）", "applyTrackersDone": "已向 {{n}} 个现有 announce 套用常用 Tracker", "libraryNeedServe": "已保存。请在面板启动 ysk-server serve，WebTorrent 才会下载／做种。", "libraryDestIsFile": "无法建立名为 {{name}} 的文件夹——该处已有同名文件。", "librarySeedMissing": "此文件夹没有可做种的对应文件。", "libraryWaitingPeers": "正在等待 peers。若文件已在此主机，请重新加入并选使用现有文件做种。" }, "migrate": { "orphanConfirm": "请输入完整孤立主目录路径以确认删除。", "orphanStillInStore": "该主目录仍属于 store 内的项目。", "orphanMissing": "磁盘没有此路径：{{path}}", "orphanNeedExecute": "将删除孤立主目录 {{path}}。需 YSK_EXECUTE=1。", "orphanRmFailed": "无法删除孤立主目录：{{detail}}", "orphanRemoved": "已删除孤立项目主目录 {{path}}。" }, "publicFiles": { "liveConf": "生效 Nginx 配置文件：{{path}}", "publicRoot": "公开根目录：{{path}}", "confNameStale": "配置文件 {{file}} 与当前 server_name {{serverName}} 不一致。请再套用公用文件以改名。" }, "leftover": { "staleCliTitle": "遗留旧版 CLI", "staleCli": "仍有旧 CLI：{{path}}（产品版本 {{version}}）。PATH 可能优先使用它。移除：rm -f {{path}}", "apacheDefaultTitle": "Apache 遗留默认站", "apacheDefault": "Apache 000-default 仍占 :80。产品 overlay 不会停用。请在面板套用 Apache，或 hosting apache apply --execute。", "nginxCatchAllTitle": "Nginx 缺 catch-all", "nginxCatchAll": "/etc/nginx/conf.d 没有 ysk-000-default.conf。未知 SNI 可能落到其他站。请执行 projects nginx-sync --execute。", "vsftpdTitle": "vsftpd 单元失败", "vsftpd": "vsftpd 失败。overlay 不会重写 listen／listen_ipv6。请在面板套用 FTP。", "dovecotTitle": "Dovecot TLS 指向不存在的证书", "dovecot": "Dovecot ssl_cert 指向不存在的 {{path}}。overlay 不会改成 ssl=no。签发邮件证书后套用邮件 TLS。", "overlayDoesNotHeal": "产品 overlay 不会改写 nginx、Apache、vsftpd 或 Dovecot。请用列出的套用命令（root + YSK_EXECUTE=1）。", "executeStaleCli": "请加 --execute（root + YSK_EXECUTE=1）以移除残留 CLI。", "executeMissingTls": "请加 --execute（root + YSK_EXECUTE=1）以关闭缺证 TLS，让 vsftpd／Dovecot 可以启动。", "executeGeneric": "请加 --execute（root + YSK_EXECUTE=1）以套用上述遗留清理。", "staleCliRemoved": "已移除残留 CLI {{path}}。", "staleCliRemoveFailed": "无法移除残留 CLI {{path}}：{{detail}}", "vsftpdSslOff": "因 FTPS 证书文件不存在，已将 vsftpd 设为 ssl_enable=NO 并重新启动。", "dovecotSslOff": "因 {{path}} 不存在，已将 Dovecot 设为 ssl=no 并重新启动。", "readinessTitle": "overlay 后主机遗留", "readinessClean": "未检测到 Apache 默认站、缺 nginx catch-all、vsftpd 失败或旧 CLI。", "nginxRemoved": "已移除残留 nginx 设定 {{path}}。", "nginxNotLeftover": "不是残留 public-files 设定 — 拒绝删除。", "nginxUnusedKeep": "000-default 是未使用，不当残留 — 未删除。", "nginxSystemCopy": "系统副本仍在：{{path}}。需要 YSK_EXECUTE + root 先可以移除。", "nginxReloadFailed": "移除 {{path}} 后 nginx -t 或 reload 失败。" }, "defense": { "panelReqLabel": "面板请求数/分钟", "panelReqExcluded": "经过身份验证的面板流量 - 此处显示，不计入威胁评分", "tcpOk": "TCP {{target}} 可达", "tcpFail": "TCP {{target}} 失败", "dnsDegraded": "DNS 路径降级", "reqRateHigh": "公开请求率 {{reqs}}/min ≥ {{threshold}}", "ddosHeuristic": "高公共请求率加上边缘探测失败" } }, "ops": { "blocked": { "needExecute": "服务器未开启系统变更权限，无法在管理面板完成此操作", "needExecuteShort": "未开启系统变更权限", "needExecuteBlocked": "已封锁：未开启系统变更", "needRoot": "需要系统管理员权限（root）", "needExecuteRoot": "需要 YSK_EXECUTE=1 与 root", "needExecuteYsk": "需要 YSK_EXECUTE=1", "writeOutsideDataDir": "写入被阻止：未开启系统变更权限，且路径在管理数据目录外", "nginxReload": "无法重载 Nginx：需要系统变更权限", "signal": "无法发送信号：需要系统变更权限（YSK_EXECUTE）", "signalNote": "需要 YSK_EXECUTE=1 才会真正 kill", "renice": "无法 renice：需要系统变更权限（YSK_EXECUTE）", "install": "服务器未开启系统变更权限，无法在管理面板完成安装", "update": "服务器未开启系统变更权限，无法在管理面板完成更新", "panel": "无法在管理面板完成此操作" }, "honesty": { "blockedNotOk": "诚实校正：blocked 时不可 ok=true", "blockedNotApplied": "诚实校正：blocked 时不可 apply_status=applied", "okFalseNotApplied": "诚实校正：ok=false 时不可 apply_status=applied" }, "status": { "applied": "状态：applied", "failed": "状态：failed", "written": "状态：written", "blocked": "状态：blocked" }, "notes": { "writtenSettings": "已写入设置", "completed": "完成", "partialSuccess": "操作未完全成功", "notInstalled": "未安装", "running": "运行中", "stopped": "已停止", "unknown": "未知" } }, "opsResult": { "title": "操作结果", "status": "状态", "port": "端口", "url": "网址", "pid": "PID", "blocked": "无法执行", "success": "成功", "failed": "失败", "retry": "重试", "showDetails": "详细（{{count}}）", "hideDetails": "隐藏详细", "stepBuildOk": "构建完成", "stepHealthOk": "健康检查通过", "stepProcessStarted": "进程已启动", "stepSystemdFallback": "systemd 未就绪 — 已用进程方式启动", "stepNginxWritten": "已写入 Nginx 配置", "stepConfigsSynced": "配置已同步至系统", "stepStoppedOld": "已停止旧进程", "stepTuningApplied": "已应用运行时调校", "stepUnitWritten": "已写入 systemd 服务", "stepSystemdStartFailed": "systemd 启动失败 — 已降级为进程启动", "portListening": "埠 {{port}} 正在监听", "portNotListening": "埠 {{port}} 未在监听", "httpOk": "HTTP 正常 {{status}}", "httpFail": "HTTP 失败：{{detail}}" }, "pageGuide": { "missing": "此页尚未提供说明内容。", "missingTitle": "暂无说明", "eyebrow": "说明", "canDoTitle": "可以做什么", "workflowTitle": "建议流程", "notesTitle": "注意事项", "cliTitle": "CLI 速查", "cliFoot": "完整参数请执行 ysk-server --help 或参阅文档。", "relatedTitle": "相关功能" }, "playbooks": { "discover-host": { "name": "主机探索", "description": "只读主机清单" }, "nginx-health": { "name": "Nginx 健康检查", "description": "检查 nginx 服务状态" }, "nginx-restart": { "name": "Nginx 重启（高风险）", "description": "审批后重启 nginx" }, "local-llm-ops-only": { "name": "仅本机 LLM 操作", "description": "防护模式下紧急探索" }, "disk-pressure": { "name": "磁盘压力检查", "description": "只读磁盘用量（df）" }, "mail-stack-status": { "name": "邮件堆栈状态", "description": "检查 postfix + dovecot unit" }, "security-units": { "name": "安全 unit", "description": "fail2ban + sshd 状态（只读）" }, "web-stack-status": { "name": "Web 堆栈状态", "description": "nginx + php-fpm 探测" }, "emergency-read-only": { "name": "紧急只读扫视", "description": "仅防护安全事实" }, "backup-health": { "name": "备份就绪", "description": "备份就绪检查" }, "db-stack-status": { "name": "数据库堆栈状态", "description": "数据库服务状态" }, "ssl-nginx-check": { "name": "SSL + Nginx 检查", "description": "SSL 与 Nginx 检查" } }, "presetChips": { "customPlaceholder": "自定义…" }, "projects": { "title": "项目", "subtitle": "", "create": "创建项目", "createHint": "创建后到详情部署", "empty": "尚未创建项目", "emptyHint": "按「创建项目」开始", "emptyFilter": "没有符合的项目", "emptyFilterHint": "清除搜索或筛选", "name": "名称", "domain": "域名（选填）", "detail": "项目详情", "deploy": "部署", "deployPhp": "部署 PHP", "stop": "停止", "health": "健康检查", "publishNginx": "发布 Nginx", "publishNginxSsl": "发布 Nginx + SSL", "opsResult": "操作结果", "runtime": "运行时", "template": "範本（选填）", "templateNone": "— 无 —", "searchPlaceholder": "搜索名称、域名或 ID…", "listDesc": "管理该主机上的站点。", "filterAll": "全部 runtime", "statTotal": "全部", "statRunning": "运行中", "statDegraded": "降级", "statUnhealthy": "異常", "statStopped": "停止 / 就緒", "statStoppedOnly": "已停止", "statReadyOnly": "准备好", "statPendingOs": "待 OS", "status": { "failed": "失败", "failedHint": "部署或健康检查失败 — 请查看日志", "unhealthy": "異常", "unhealthyHint": "行程仍在但健康检查失败", "pendingOs": "待创建系统用户", "pendingOsHint": "系统用户尚未创建", "degraded": "运行中（降级）", "degradedHint": "行程已启动，但非完整生产模式（例如非 root / pidfile）", "deploying": "部署中", "published": "已发布", "publishedHint": "Nginx 设置已写入；行程状态可能另计", "running": "运行中", "stopped": "已停止", "ready": "已就绪", "readyHint": "已创建 — 请部署以启动", "unknown": "未知" }, "checklist": { "title": "上线路径", "desc": "完成以下步骤即可对外提供服务", "created": "已创建", "os": "OS 用户", "deploy": "部署", "nginx": "Nginx", "health": "健康" }, "next": { "pendingOsTitle": "系统用户尚未创建", "provisionOsAction": "建立系统用户", "pendingOsBody": "此项目尚未创建獨立系统用户。", "pendingOsActions": "可繼續部署；完整隔離需以系统管理员权限执行。", "deployTitle": "下一步：部署", "deployBody": "按上方「部署 PHP／部署」启动 runtime，或到「部署」分页用 Git。", "nginxTitle": "下一步：发布 Nginx", "nginxBody": "到「网絡」分页或总览快捷操作发布 Nginx（可选 SSL）。" }, "healthDetail": { "none": "尚未执行健康检查", "overall": "结果", "nginxStatus": "Nginx 状态", "nginxReloaded": "Nginx 重载", "httpStatus": "HTTP", "latency": "延遲", "error": "错误", "at": "检查时间", "deployMode": "部署模式", "edgeKind": "边缘", "goLiveOk": "上线", "goLiveAt": "上线时间", "degraded": "降级" }, "railPhp": "PHP / 站点", "railStatic": "静态站", "sectionPhpDeploy": "PHP 部署", "sectionPhpDeployDesc": "写入 PHP 站点／pool，并依权限应用到系统", "sectionStaticDeploy": "静态内容", "sectionStaticDeployDesc": "静态站以文件 + Nginx 为主，无 Node 行程", "staticDeployHint": "请用 Git 拉取内容，再到「网絡」发布 Nginx。", "noDomain": "未设置域名", "lastDeploy": "上次部署", "neverDeployed": "尚未部署", "created": "已创建 {{name}}", "backToList": "返回项目列表", "openUrl": "开启网站", "openUrlNeedDomain": "首先设置一个域名 - 不要在浏览器中打开 127.0.0.1", "needOsUser": "首先在“隔离”选项卡上创建系统用户", "goIsolation": "前往隔离分页", "homeMissing": "主目录不存在", "homeMissingHint": "与迁移盘点同一探测 — 请到隔离分页建立系统用户", "stopTitle": "停止该项目（systemd 单元和公共站点）", "deployTitle": "部署此项目", "httpStatsHint": "来自该项目的访问日志（最后一个示例）", "httpStatsNone": "尚无项目访问日志", "notFound": "找不到此项目", "home": "Home 目录", "env": "环境", "backup": "备份", "resources": "资源", "quotaUnlimited": "无配额限制", "lastHealth": "最近健康检查", "tabOverview": "总览", "tabDeploy": "部署", "tabApp": "应用", "tabNetwork": "网络", "tabResources": "资源", "tabIsolation": "隔离", "tabLogs": "日志", "tabAdvanced": "高级", "tabMore": "更多", "createGoLive": "创建后立即部署并发布 Nginx", "createPreferredPort": "固定端口（可选）", "goLiveOk": "已部署并发布", "goLivePartial": "已创建；部署／发布未完成", "nginxLive": "已加载", "nginxWritten": "已写入", "nginxNeedsDeploy": "需先部署", "nginxFailed": "发布失败", "netEdgeStatus": "站点状态", "netUpstream": "上游", "netPortTitle": "进程端口", "netCurrentPort": "当前端口", "netPublishTitle": "发布", "netConfPreview": "配置", "savePublishSsl": "保存并发布 + SSL", "retryLiveTitle": "上线未完成", "retryLiveBody": "部署或 Nginx 发布未成功，可重试。", "retryDeploy": "重试部署", "retryPublish": "重试发布 Nginx", "preferredPortRedeployHint": "保存后需重新部署才会改进程端口", "railProcess": "行程", "railNginx": "Nginx", "railOs": "OS 用户", "railHealth": "健康", "nginxPublished": "已发布设置", "nginxNone": "尚未发布", "osProvisioned": "已创建系统用户", "osPending": "尚未完成 OS 隔離", "healthOk": "正常", "healthBad": "失败", "healthUnknown": "尚未检查", "sectionRuntimeDeploy": "Runtime 部署", "sectionRuntimeDeployDesc": "依项目 runtime 启动行程（Node / PHP）", "sectionGit": "Git 部署", "sectionGitDesc": "从 Git 拉取程式码并重新部署", "sectionEnv": "环境变数", "sectionEnvDesc": "以 KEY=value 写入项目 .env", "gitUrl": "git 网址", "gitDeploy": "Git 部署", "envFile": "环境档（.env）", "saveEnv": "保存环境变数", "sectionNginx": "Nginx 与 SSL", "sectionNginxDesc": "写入并应用网站设置", "domainHint": "建议先在创建时填域名，方便 Publish", "sectionQuota": "磁碟配额", "sectionQuotaDesc": "限制项目 home 可用空间（MiB）", "sectionLimits": "CPU / 内存", "sectionLimitsDesc": "systemd 资源限制；需重新 Deploy 才应用 unit", "quotaMb": "配额（MiB）", "memoryMax": "最大内存", "cpuQuota": "CPU 配额 %", "setQuota": "设置配额", "setResources": "保存资源限制", "sectionLogs": "应用日志", "sectionLogsDesc": "读取项目目录下最近 log 档", "viewLogs": "加载日志", "logsEmpty": "尚未加载日志", "logsNoFiles": "（尚无 log 档 — 请先 Deploy）", "sectionAdvanced": "其他操作", "sectionAdvancedDesc": "备份与範本内容下载", "downloadWp": "下载 WordPress", "dangerZone": "危险区域", "dangerZoneDesc": "删除项目会移除管理记录与相关资源", "delete": "删除项目", "confirmStopTitle": "停止此项目？", "confirmStopDesc": "将停止「{{name}}」的运行行程。", "confirmDeleteTitle": "删除此项目？", "confirmDeleteDesc": "确定删除「{{name}}」？此操作无法从介面复原。", "close": "关闭", "statProjects": "{{count}} 项目", "noProjectsShort": "尚无项目", "runtimeStatic": "静态", "logsLoadFailed": "读取日志失败", "deleteFailed": "删除失败", "tabAbout": "说明", "statusLabel": "状态", "userLabel": "用户", "nginxValuePublished": "已发布", "nginxValueNone": "未发布", "osValueReady": "已建", "osValuePending": "待建", "openFiles": "文件", "enableCdn": "启用 CDN", "openLogs": "日志", "osUserReadyMsg": "系统用户已就绪。{{detail}}", "osUserNeedRoot": "无法创建系统用户：需要 YSK_EXECUTE + root。{{detail}}", "osUserIncomplete": "系统用户创建未完成", "saveLogDirsFailed": "保存 log 目录失败", "createName": "项目名称", "noPathSepHint": "名稱不可包含 / 或 \\。", "createRuntime": "执行环境", "createRuntimeHint": "之后可在详情調整部署方式", "createVersion": "版本", "createVersionHint": "写入项目 runtime_version；部署／FPM 会參考此版本", "createVersionAria": "执行环境版本", "createPrimaryDomain": "主要域名", "createPrimaryDomainHint": "可稍后再填", "createAliases": "别名", "createAliasesHint": "逗号或換行分隔", "createTemplate": "範本", "createTemplateHint": "每个执行环境只有一个 Hello World! demo；选范本会带入对应 runtime", "createTemplateNote": "範本只写入项目目录骨架；需再「部署」才会 build／启动。", "createRuntimeNow": "目前执行环境：", "createTemplateFooter": "。可选範本加速起步，或不选直接空白项目。", "createDraftResources": "与域名一并创建草稿资源", "createNeedDomainFirst": "请先填「主要域名」，以下选项才会一并创建草稿。", "createDnsZone": "同时创建 DNS zone", "createDnsZoneDesc": "只写管理文件（draft），不等于权威 DNS 已上线", "createMailDomain": "同时登记邮件域名", "createMailDomainDesc": "之后可到邮件页完成邮箱与应用", "createServerIpv4": "服务器 IPv4", "createServerIpv4Hint": "DNS／邮件範本用", "createServerIpv4Ph": "此主机公网 IPv4", "createServerIpv6": "服务器 IPv6（可选）", "createServerIpv6Ph": "公网 IPv6（可留空）", "sshCardDesc": "登录公钥决定誰能进来；出站身份决定这用户出去用哪把匙。", "sshLoginKeys": "允许登录的公钥", "sshKeyCount": "{{count}} 把", "sshOutbound": "出站身份", "sshOutboundNone": "尚未创建", "sshOutboundCreated": "已创建出站身份（私钥已加密保存）", "sshCreateFailed": "创建失败", "sshWriteTried": "已嘗試写入磁碟", "sshOutboundHint": "创建出站身份后，此项目用户可用于 git／脚本连外。", "sshCreateOutbound": "一键创建出站身份", "sshWriteHome": "写入 home/.ssh", "sshOpenWorkspace": "开启 SSH 工作台", "sshManageLoginKeys": "管理登录公钥", "logsSectionDesc": "扫描 logs/、log/ 与额外目录；可按档名／内容关键字搜索", "logsNameSearch": "档名搜索", "logsNameSearchHint": "匹配相对路径，例如 error、app.out", "logsContentKw": "内容关键字", "logsContentKwHint": "在各档尾端搜索（不系全档全文）", "logsSearch": "搜索", "logsRescan": "重新扫描", "logsRefreshFile": "刷新此档", "logsCopy": "复制内容", "logsDownloadTail": "下载尾端", "logsCenter": "日志中心", "logsHitsTitle": "内容命中 {{count}} 个档 — 点档名可开尾端（含关键字过滤）", "logsLinesHit": "{{count}} 行命中", "logsFileCount": "日志档 {{count}}", "logsNameFilter": "（档名含「{{q}}」）", "logsScanning": "正在扫描 logs…", "logsNoneYet": "尚无日志档 — 部署或跑过服务后会出现；亦可设置额外目录。", "logsNoContent": "尚无内容", "logsRelated": "相关来源", "logsRelatedDesc": "journal / nginx / PHP-FPM（详见日志中心）", "logsAvailable": "可用", "logsMissing": "未见", "logsOpenInCenter": "在日志中心开启", "logsExtraDirs": "额外 log 目录", "logsExtraDirsDesc": "相对项目 home 的路径（除默认 logs/、log/ 外）", "logsDirList": "目录列表", "logsDirListHint": "一行一个；只允许 home 内相对路径", "logsReset": "重设", "logsSaveScan": "保存并扫描", "logsDefaultNote": "默认永远扫描 logs/ 与 log/。额外目录只收入档名像 *.log / *.out / *.err 的档。", "resOsTitle": "系统用户隔離", "resOsDesc": "每个项目獨立 Linux 用户；意图 home：/home/ysk-server-{项目 id}", "resLinuxUser": "Linux 用户", "resOsIsolation": "OS 隔離", "resOsReady": "已就绪", "resOsNotCreated": "未创建（需系统管理员）", "resHomeDir": "Home 目录", "resCanonical": "意图路径", "resUserMissing": "用户不存在", "resShellLive": "实时 shell / 锁定", "resLocked": "已锁定", "resUnlocked": "未锁定", "resHomeMode": "home 模式", "resHomeExists": "存在 · mode {{mode}}", "resHomeMissing": "不存在", "resIsolationOn": "隔離中", "resIsolationPending": "待隔離", "resOsHint": "行程以项目用户执行。创建系统用户需 YSK_EXECUTE + root；否則为 degraded。", "resProvisionUser": "创建／修复系统用户", "resRefreshStatus": "刷新状态", "resFixHome": "修复 home 擁有权", "resMigrateHome": "迁移到 /home/ysk-server-…", "resQuotaDesc": "软配额（deploy 前 du 擋）+ 有 setquota 时可硬强制", "resQuotaHint": "例如 1024 = 1 GiB", "resSetSoftQuota": "保存软配额", "resLimitsTitle": "行程与账号限制", "resLimitsDesc": "systemd MemoryMax / CPUQuota / TasksMax / NOFILE + shell／锁定", "resLimitsDescSystemd": "systemd cgroup：MemoryMax / CPUQuota / TasksMax / NOFILE + shell／锁定", "resLimitsDescPm2": "PM2：内存对应 max_memory_restart；其余限额见 systemd。", "resRunnerSystemd": "进程管理：systemd", "resRunnerPm2": "进程管理：PM2", "resMemMax": "内存上限", "resMemHint": "例如 512M 或 1G", "resMemHintSystemd": "systemd MemoryMax（cgroup 硬顶，例如 512M 或 1G）", "resMemHintPm2": "写入 ecosystem max_memory_restart（到额重启，非 cgroup 硬杀）；例如 512M 或 1G", "resFieldSystemdOnly": "仅 systemd cgroup 有效；仍会存 DB，改回 systemd 部署后生效", "resCpuHint": "100 = 一顆 CPU", "resCustomPct": "自定义 %", "resTasksHint": "行程数上限", "resNofileHint": "开档上限", "resShellHint": "默认 nologin", "resShellBashRisk": "bash · 风险", "resLockAccount": "锁定 Linux 账号", "resLockDesc": "usermod -L；解锁时取消勾选", "resLimitsHint": "「保存并应用」会写 DB 并嘗試 usermod / setquota / systemctl set-property。无权限时只写控制面。", "resLimitsHintSystemd": "「保存并应用」会写入控制面，并在有权限时应用 OS／systemd 限额。", "resLimitsHintPm2": "「保存并应用」会写入控制面并更新 PM2 内存上限。", "resSaveApply": "保存并应用限制到 OS", "resSaveControlOnly": "仅存 Mem/CPU 到控制面", "resReapply": "再应用一次（不改表单）", "resMigrateDone": "迁移完成", "resMigrateIncomplete": "迁移未完成", "resMigrateTitle": "迁移系统用户 home？", "resMigrateDesc": "将迁移到 /home/ysk-server-{id} 并创建／修复系统用户。需 root。", "resMigrate": "迁移", "resWrittenOnly": "已写入控制面；OS 未应用（需 root）。{{notes}}", "resAppliedOs": "限制已应用到 OS。{{notes}}", "resSaved": "已保存", "resIncomplete": "未完成", "resApplyLimitsFailed": "应用限制失败", "resApplied": "已应用", "resApplyFailed": "应用失败", "resChownOk": "chown 完成", "resChownFailed": "chown 失败", "netSavedPublished": "网絡已保存并发布 Nginx", "netSavedOnly": "网絡设置已保存（未发布）", "netSaveFailed": "保存失败", "netSuspended": "项目已暂停 — 訪客会收到 503。恢复后再发布站点。", "netDomainTitle": "域名", "netDomainDesc": "主要域名与别名；保存后可一并写入 Nginx 管理设置", "netPrimaryDomain": "主要域名", "netPrimaryHint": "訪客用来开启网站的域名，例如 app.example.com", "netAliases": "别名", "netAliasesHint": "每行一个，例如 www 或 blog 子域名", "netNeedPrimary": "请先填写主要域名", "netHttpsTitle": "HTTPS 与整站重新导向", "netHttpsDesc": "保存后请发布 Nginx。整站 301 会蓋过 proxy／PHP／static 内容", "netForceHttps": "强制使用 HTTPS", "netForceHttpsDesc": "HTTP → HTTPS（301）；需已有 SSL 证书并用 SSL 发布", "netForceHttpsOn": "发布边缘后，HTTP 将重定向到 HTTPS。", "netForceHttpsOff": "不存储强制重定向。", "netBoundCert": "已绑定证书", "netBoundCertExpiry": "到期 {{at}}", "netNoBoundCert": "此主机名磁盘上没有证书", "netForceHttpsNeedCert": "强制 HTTPS 前，请先在 /ssl 为此域名签发证书。", "netHttpsLiveNotForced": "存在边缘文件； HTTPS 可能已经可以工作。此框仅强制 HTTP→HTTPS。", "netHsts": "启用 HSTS", "netHstsDesc": "浏览器记住只走 HTTPS（建议在强制 HTTPS 后开启）", "netHstsNeedHttps": "请先启用强制 HTTPS", "netRedirectUrl": "整站重新导向网址", "netRedirectHint": "可留空。填写后整站 301 到此网址（例如搬站／apex→www）", "netBasicAuthTitle": "HTTP 基本认证（浏览器登录保护）", "netBasicAuthDesc": "发布时写入 htpasswd；用户名留空 = 关闭。密码留空 = 沿用已存密码", "netAuthUserHint": "留空关闭认证", "netAuthPassHint": "首次设置必填；之后不改可留空", "netAuthPassSet": "设置或更新密码", "netCacheNote": "静态／PHP 静态资源默认 Cache-Control 7d；purge 清主机 nginx cache 目录（需 YSK_EXECUTE）", "netPurgeOk": "已嘗試 purge cache", "netPurgeFailed": "purge 失败", "netDocrootTitle": "网站目录（docroot）", "netDocrootDesc": "相对项目 home；发布 Nginx 时会用此路径作为 root（默认 app/public）", "netDocrootLabel": "文件根目录", "netDocrootFull": "完整路径：{{path}}", "netDocrootCustom": "自定义相对路径…", "netAdvancedTitle": "高级与发布", "netAdvancedDesc": "绑定 IP、发布到系统 Nginx", "netCollapseBind": "收起绑定 IP", "netExpandBind": "展开绑定 IP", "netBindIp": "绑定 IP", "netBindHint": "留空 = 聽全部网卡", "netBindPh": "留空 = 聽全部；可填绑定 IP", "netNeedDomainSave": "请先填写并保存主要域名", "ovUsed": "已用", "ovQuota": "配额", "ovQuotaUnset": "未设", "ovQuotaStatus": "配额状态", "ovOverQuota": "超额", "ovQuotaOk": "正常", "ovDocroot": "文件根目录", "ovAccessSample": "Access 樣本", "ovLines": "{{count}} 行", "ovDailyDays": "日统计天数", "ovDailyTitle": "訪问日统计（最多 60 日）", "ovDailyDesc": "由 access log 樣本滚动记录", "ovQuickTitle": "站点快捷操作", "ovQuickDesc": "发布与备份（主部署请用页頂按鈕或「部署」分页）", "ovNeedNetworkDomain": "请先到「网絡」分页设置域名", "ovPublishNginx": "发布 Nginx", "ovPublishSsl": "发布 Nginx + SSL", "ovBackupProject": "备份本项目", "ovOpenFiles": "开启项目文件", "ovNoDomainHint": "未设置域名 — 请到「网絡」分页设置后再发布站点。", "ovPublishNote": "发布会写入管理设置；真正 reload 系统 Nginx 需系统变更权限。", "ovStatic": "静态", "ovAliases": "别名", "ovForceOn": "强制", "ovForceOff": "不强制", "advFtpCreated": "FTP {{user}} 已创建（草稿，需到 FTPS 页应用）", "advCreateFailed": "创建失败", "advFtpFailed": "FTP 创建失败", "advMaintTitle": "维护操作", "advMaintDesc": "备份、暂停／恢复、选用工具", "advBackupProject": "备份本项目", "advOneClickWp": "一键 WordPress（下载+设置）", "advSuspendedHint": "暂停中：进程已停、訪客会收到 503。", "advSuspendHint": "暂停会停止进程并将站点改为 503 维护页。", "advFtpTitle": "项目 FTP（路径 Jail）", "advFtpDesc": "账户限制在项目 app 目录；创建后请到 FTPS 服务页应用", "advFtpUserHint": "可留空，系统自动生成", "advFtpPassHint": "至少 8 个字符", "advDangerTitle": "危险区域", "advDangerDesc": "删除项目无法从介面复原，请确认已备份。", "advDelete": "删除项目", "deployPyHint": "默认 venv + pip；ASGI 用 uvicorn，Django 用 gunicorn。", "deployGoHint": "默认：go build -o app . 后启动 ./app；可跳过建置若二进位已存在。", "deployRustHint": "默认：cargo build --release 后启动 target/release/{crate}；可跳过建置。", "deployNodeHint": "依 Node 启动行程（entry 默认 server.js）；生产环境建议 systemd。", "deployDefaultHint": "依 runtime 启动；应用后才对外。", "deployOsStep": "獨立 Linux 用户 + /home/ysk-server-{项目 id}（资源分页可创建）", "deployPyReady": "Python 执行环境已就绪", "deployPipNet": "有 requirements.txt 时需外网 pip", "deployCheckPort": "部署后检查埠与 /health", "deployPublishProxy": "发布 Nginx 反代", "deployToolchainReady": "{{runtime}} toolchain 已就绪", "deployFirstBuild": "首次部署会 build（可能較久）", "deployNeedBinary": "build 成功后才有可执行档", "deployPhpFpmOk": "PHP-FPM 版本正确", "deployPhpPool": "部署 PHP／应用 pool", "deployNginxSsl": "发布 Nginx + 可选 SSL", "deployPublicContent": "确认 public/ 有内容", "deployNetPublish": "到「网絡」发布 Nginx", "deployConfirmToolchain": "确认执行环境页已安装对应 toolchain（或主机已有）", "deployConfirmCode": "确认 app/ 内有程式码（範本或 Git）", "deployPressDeploy": "按「部署」启动；成功后到「网絡」发布 Nginx", "deployVersionSaved": "已保存 {{runtime}} 版本 {{version}}（部署时会用此版本）", "deployVersionSaveFailed": "保存 runtime 版本失败", "deployInstallingToolchain": "正在安装／确认 toolchain…", "deployToolchainIncomplete": "Toolchain 安装未完成（权限或网路）；可改手动到执行环境页", "deployToolchainDone": "Toolchain 步骤完成，开始部署…", "deployToolchainFailed": "安装 toolchain 失败", "deployChecklistTitle": "创建完成 — 部署检查列表", "deployChecklistDesc": "{{runtime}} 项目骨架已就绪；完成下列步骤才会对外服务", "deploySectionTitle": "{{runtime}} 部署", "deploySectionDesc": "依 {{runtime}} 启动行程（埠／systemd 或 pidfile）", "deployPhpVersion": "PHP 版本", "deployPhpVersionHint": "本站使用的 PHP 版本（需主机已安装对应 FPM）", "deployRuntimeVersion": "{{runtime}} 版本", "deployRuntimeVersionHint": "写入项目后部署会用此版本；安装请到执行环境页", "deployRuntimeVersionCreateHint": "创建时写入；部署时參考", "deployRuntimeVersionGeneric": "Runtime 版本", "deployEntry": "启动 entry", "deployEntryHint": "可留空用默认（{{hint}}）；会同步到服务器", "deploySkipBuild": "跳过建置", "deploySkipBuildHint": "已有 venv／二进位时可勾选，加快重启（会记住本机偏好）", "deployPort": "· 埠 {{port}}", "deployFpmApplied": "已应用 PHP-FPM pool", "deployFpmIncomplete": "FPM 未完成", "deployFpmNote": "会写入站点／pool 设置；真正 reload 需系统变更权限。", "deployBuildNote": "建置／启动失败会在操作结果显示原因，不会假装成功。entry 会写入服务器；跳过建置另存本机偏好。", "deployPhpIniTitle": "项目 php.ini 覆盖", "deployPhpIniDesc": "只填要改的鍵；空白＝沿用全局（执行环境 → PHP → php.ini）。部署／应用 FPM 时写入 php_admin_*", "deployPhpIniExample": "例如 256M；留空用全局", "deployGlobal": "全局", "deployCustom": "自定义", "deployOff": "关", "deployOnCareful": "开 · 慎", "deployPhpIniSaved": "已保存项目 php.ini 覆盖；请再部署或应用 FPM", "deployHistory": "部署历史（{{count}}）", "deployHistoryDesc": "来自操作稽核；newest first", "deployGitUrlHint": "HTTPS 或 SSH 倉庫位址；同步后会依 runtime 自动 redeploy", "deployEnvHint": "每行 KEY=value；# 开头为註解", "resume": "恢复项目", "suspend": "暂停项目", "goFtpsApply": "前往 FTPS 服务应用", "toolchainNote": "安装 toolchain ≠ 项目已上线；部署成功 ≠ Nginx 已对外（需在「网络」发布）。", "installToolchainDeploy": "安装 toolchain 并部署", "deployOnly": "僅部署", "openRuntime": "开启 {{runtime}} 执行环境", "later": "稍后再说", "installToolchainDeployShort": "装 toolchain 并部署", "runtimeEnv": "{{runtime}} 环境", "applyFpmPool": "应用 FPM pool", "staticNginxHint": "静态站以「发布 Nginx」为主 — 请到「网络」或总览快捷操作。", "fullIniLink": "完整目录与 opcache／session 等请到", "phpIniLink": "PHP 执行环境 → php.ini", "savePhpIniOverride": "保存 php.ini 覆写", "scaffoldNote": "若 app/ 为 YSK 范本佔位（含 .ysk-scaffold），会先清除再 clone；已有自定义内容会拒绝覆写。", "saveOnly": "只保存", "savePublishNginx": "保存并发布 Nginx", "needDomainToPublish": "填写主要域名后才可发布站点。", "savePublish": "保存并发布", "saveAuth": "保存认证", "cacheZoneNote": "完整 FastCGI／proxy_cache zone 需主机 nginx.conf 先定義 keys_zone；面板提供 best-effort 清除。", "purgeNginxCache": "清除 Nginx cache", "nginxManageFile": "Nginx 管理档：", "publishRuntimeNote": "发布会依 runtime 生成 proxy／PHP-FPM／static conf（含认证、导向与 docroot）", "publishStored": "用已存设置发布", "publishStoredSsl": "用已存设置 + SSL", "publishNote": "「发布」写入管理 conf；同步到 /etc/nginx 并 reload 需系统变更权限。", "hitsFiles": "内容命中 {{count}} 个档 — 点档名可开尾端（含关鍵字过滤）", "logFilesCount": "日志档 {{count}}", "defaultScanNote": "预设永远扫描 logs/ 与 log/。额外目录只收入档名像 *.log / *.out / *.err 的档。", "opsOk": "{{label}}完成{{url}}", "opsOkWithNote": "{{label}}完成：{{note}}{{url}}", "opsFail": "{{label}}失败：{{reason}}", "railPython": "Python 进程", "railGo": "Go 进程", "railRust": "Rust 进程", "railNode": "Node 进程", "runtimeName": { "php": "PHP", "node": "Node.js", "static": "静态", "python": "Python", "go": "去", "rust": "锈", "java": "爪哇", "kotlin": "科特林", "bun": "包子" }, "netCacheTitle": "缓存", "logsDeepAccess": "日志中心 · access", "logsDeepError": "日志中心 · error", "logsDeepNginxUnit": "Nginx 服务日志", "logsPresetAccess": "筛选 access.log", "logsPresetError": "筛选 error.log", "railJava": "Java 进程", "railKotlin": "Kotlin 进程", "railBun": "Bun 进程", "deployProcessManager": "进程管理", "deployProcessManagerSystemd": "systemd（推荐）", "deployProcessManagerPm2": "PM2", "proc_restart": "重启", "proc_stop": "停止", "proc_reload": "重新加载", "procControlsHint": "进程控制（{{manager}}）", "procActionOk": "{{action}} 成功 · {{notes}}", "procActionFail": "{{action}} 失败 · {{notes}}", "procActionFailShort": "进程操作失败", "procMissingUser": "项目无 Linux 用户，无法操作 PM2", "deploySystemdHint": "生产默认：unit ysk-project-*.service、开机自启、cgroup 限额跟项目资源。", "deployPm2Hint": "用 pm2 start ecosystem（需已装 PM2 plugin）。进程见「运行环境 → 进程」PM2 表。部署前会停旧 runner，避免抢端口。", "deleteDialogTitle": "永久删除项目", "deletePermanent": "永久删除", "deleteRemoveFiles": "删除磁盘 home 与 Linux 用户", "deleteTypeName": "输入项目名称以确认", "deletedOk": "项目已删除", "sslRequiredFirst": "此域名尚无 SSL 证书。请先到「SSL 证书」申请/上传，再点发布 + SSL。", "sslGateHint": "SSL 相关按钮已锁定：请先到", "sslGateHint2": "为域名申请/上传证书后再发布 + SSL。", "netPublishPrimary": "基本", "netPublishSsl": "HTTPS/SSL", "netPublishMaint": "维护", "sslNeedDomain": "请先填写域名，才能发布 Nginx / SSL。", "createTemplateMissing": "未載入 {{v0}} 範本；請重新整理或選「— 無 —」空白專案。", "deleteDialogDesc": "將銷毀「{{name}}」。此操作無法還原。", "deleteWillStop": "停止 systemd / PM2 / 本機進程", "deleteWillWeb": "移除 Nginx conf、PHP-FPM pool、Apache vhost（如有）", "deleteWillOs": "刪除 Linux 用戶與 home 目錄（安全路徑）", "deleteKeepOs": "保留 home 與 Linux 用戶（僅面板移除）", "deleteWillDb": "從控制面資料庫移除專案", "deleteRemoveFilesDesc": "取消勾選則只從面板移除，檔案與系統用戶保留", "deleteTypeNameHint": "請輸入「{{name}}」", "deleteDnsWarn": "共享 DNS zone / 郵箱 domain 不會自動刪除。", "manageInNginx": "在 Nginx 管理", "advFtpHomeApp": "站点 app 目录", "advFtpHomeRoot": "项目家目录（全部）", "advFtpManage": "打开 FTP 页", "resShell": "登录 shell", "resSaveHint": "「储存并套用」会改主机。「仅存控制面」只记表单。「再套用」用已存值再写入系统。", "resBashConfirmTitle": "允许互动式 bash？", "resBashConfirmDesc": "这会让专案用户有互动登录 shell。只在需要以该用户 SSH 或终端机时才确认。", "createGitHint": "可选。会记在专案；到部署分页再 clone（建立时不会 clone）。", "gitTokenLaterHint": "HTTPS 令牌和克隆深度在创建后在项目“部署”选项卡上设置。", "gitBranch": "分支", "gitBranchHint": "分支或 tag。留空则用远端默认分支。首次 clone 为浅层（depth 1）。", "gitBranchAfterUrl": "请先填写 Git 网址。留空则使用远端默认分支。", "gitLastRef": "上次同步：{{branch}} @ {{commit}}", "gitConfirmTitle": "要 clone 到此专案？", "gitConfirmBody": "若 app/ 仍是 Hello World 占位会先清除再 clone。非 YSK 模板的自定义文件会拒绝覆盖。", "gitConfirmRemoteBody": "会把 origin 改为新网址再 pull。历史无关则失败；不会清除自定义文件。", "runtimeActual": "实际 binary {{path}}", "runtimeFallback": "所选 {{version}} 并未安装。进程实际使用 {{path}}。", "gitSync": "同步", "gitFetch": "拿来", "gitCheckout": "查看", "gitReset": "重置为远程", "gitResetNeedConfirm": "需确认 — 会丢弃本机提交", "gitDeepen": "获取完整历史记录", "gitLogTitle": "最近的提交", "gitDirtyTitle": "本地更改阻止拉动", "gitDirtyBody": "{{count}} 个文件与 Git（文件编辑或应用程序）不同。丢弃它们或中止。", "gitSyncBlockedDirty": "同步将被禁用，直到本地更改被丢弃（重置）或文件与 Git 匹配为止。", "gitViewDiff": "查看差异", "gitDiscard": "丢弃本地文件", "gitOpenFiles": "在文件中打开", "gitNotCloned": "未克隆", "gitClean": "干净的", "gitDirty": "肮脏的", "gitBehind": "落后于 {{count}}", "gitAhead": "领先 {{count}}", "gitDetached": "已固定", "gitShallow": "浅的", "gitMissing": "git 丢失", "gitResetConfirmTitle": "重置很难远程？", "gitResetConfirmBody": "这将丢弃本地 Git 历史记录和除 .env 之外的未跟踪文件，然后从控制平面恢复 .env。", "gitHeads": "远程分支机构", "gitToken": "HTTPS 令牌", "gitTokenHint": "Personal access token. Stored encrypted; never written into the remote URL.", "gitTokenPlaceholder": "ghp_... 或 glpat-...", "gitTokenSet": "令牌集", "gitSaveToken": "保存令牌", "gitClearToken": "清除令牌", "gitDeployKey": "部署公钥", "gitDeployKeyHint": "将其添加为 Git 主机上的只读部署密钥。", "gitDeployKeyOn": "部署密钥", "gitMakeKey": "创建部署密钥", "gitCopyPub": "复制公钥", "gitClearKey": "清除部署密钥", "gitKeyCopied": "公钥已复制", "gitPinHost": "固定主机密钥", "gitPinHostBody": "{{host}} 未固定。确认指纹，然后在 SSH 克隆之前进行固定。", "gitHostUnpinned": "主机密钥未固定", "gitHookTitle": "Inbound hook", "gitHookHint": "请自行把上方完整 POST URL 贴到 GitHub／Gitea／GitLab（只接收 push）。不是 Slack。密钥用 HMAC 或 X-YSK-Git-Hook。只会同步本项目已选定的 ref。", "gitHookOn": "Hook 已开", "gitHookOff": "Hook 已关", "gitHookEnable": "开启 hook", "gitHookRotate": "更换 secret", "gitHookDisable": "关闭 hook", "gitHookSecretOnce": "请立即复制此 secret——离开页面后不会再显示。", "gitHookCopyUrl": "复制 URL", "gitHookCopySecret": "复制 secret", "gitHookCopied": "已复制", "gitHookSetup": "请在 Git 平台自行新增 webhook：Payload URL 用上方完整网址；Content type 用 application/json；事件只选 push；Secret 用启用时显示的值。", "gitHookGithub": "GitHub：Settings → Webhooks → Add webhook。Content type 选 application/json。Events 选 Just the push event。GitHub.com 需要 HTTPS。", "gitHookGitea": "Gitea：Settings → Webhooks → Add Webhook → Gitea。方法 POST。事件选 Push。", "gitHookGitlab": "GitLab：Settings → Webhooks。Trigger 选 Push events。Secret token 填 hook secret（以 X-Gitlab-Token 传送）。", "gitHookHonesty": "主机 systemd 必须设 YSK_EXECUTE=1，hook 才会真正 clone／部署。否则只回计划结果。", "gitHookSkipOther": "其他分支的 push 会被忽略，只同步本项目的 ref。", "gitAuthHttps": "HTTPS 令牌", "gitAuthSsh": "SSH 部署密钥", "gitLoadRefs": "加载分支", "gitRefDefault": "远程默认", "gitRefBranches": "分支机构", "gitRefTags": "标签", "gitRefOther": "其他参考…", "gitRefCustom": "提交或参考", "gitRefsNeedUrl": "首先输入一个网址。", "gitRefsNeedAuth": "保存令牌或部署密钥，然后加载分支。", "gitRefsHint": "从远程加载。选择一个 — 不要打字。", "gitHookSetupToggle": "这个怎么粘贴", "gitHookOneLiner": "HMAC 或 X-YSK-Git-Hook。仅此项目的参考。", "gitHookExecuteHint": "需要 YSK_EXECUTE=1 才能克隆或部署。", "gitShowKey": "显示密钥", "gitHideKey": "隐藏", "gitBehindShort": "↓{{计数}}", "gitAheadShort": "↑{{计数}}", "gitDirtyShort": "肮脏 · {{count}}", "gitFilesLink": "文件", "nameInvalid": "请用小写名称：以英文字母开头，其后可为字母、数字或连字号（最长 31 字）。", "deployVersionMissing": "此主机未安装 Node {{version}}。请改选已安装的版本，或先安装此版本。", "deployUsedBinary": "本次部署使用 {{path}}" }, "protection": { "levels": { "low": { "label": "正常", "verb": "系统平稳", "hint": "维持日常防护即可" }, "elevated": { "label": "偏高", "verb": "有异常迹象", "hint": "建议切到「加固」并留意可疑 IP" }, "under_attack": { "label": "受攻击", "verb": "疑似正在受攻击", "hint": "立即套用「受攻击」檔 + 批量封禁" }, "critical": { "label": "危急", "verb": "威胁严重", "hint": "考虑紧急档；确认白名单有你" } }, "presetsWhen": { "daily": "日常运营", "hardened": "扫描／暴力", "under_attack": "L7 爆量", "emergency": "最后手段" }, "note": { "notApplied": "未套用到系统（需 root + YSK_EXECUTE=1）— 已记到管理设置", "nginxWritten": "已写入 Nginx 限速管理檔", "f2bWritten": "已写入 fail2ban 管理設定", "hintDropped": "已略过内部防护提示", "nginxLimits": "将写入 Nginx 限速片段" }, "rel": { "justNow": "刚刚", "minutesAgo": "{{n}} 分钟前", "hoursAgo": "{{n}} 小时前" }, "apiUnreachable": "无法连线 API（Web proxy／后端可能未启动）", "geoipLoadFailed": "加载 GeoIP 失敗", "loadFailed": "加载失敗", "previewDone": "预览完成（未写入）", "presetApplied": "已套用防护档", "manualBan": "手动封禁", "banSent": "已送出封禁 {{ip}}", "quickSelectBan": "快速选取封禁", "bulkBan": "批量封禁 {{count}} 個", "autoBanStatus": "自動 ban：{{onOff}} · {{mode}} · {{method}}", "autoBanUpdated": "已更新自動 ban", "automationMaster": "自动化主开关：{{onOff}}", "autoPresetStatus": "自動防护档：{{onOff}}", "autoBanAutomation": "自動 ban：{{onOff}}（{{mode}}）", "automationSaved": "已保存自动化设置", "statFirewall": "防火墙", "statSuspects": "可疑IP", "statSuspectsSplit": "可操作 {{actionable}}／全部 {{total}}", "suspectActionableCount": "可操作 IP {{count}}", "scoreBasisHint": "威胁评分使用防火墙、fail2ban 禁止量和请求率信号——与英特尔嫌疑人列表的计数不同。", "statAutoBan": "自動 ban", "statApply": "系统套用", "statActiveBans": "活跃封禁", "statPreset": "防护档", "threatPill": "威胁 {{label}} · {{score}} 分", "reprobed": "已重新探测", "loadingStatus": "加载防護狀態…", "tabs": { "command": "应变", "automation": "自动化", "bans": "封禁", "geo": "IP 准入", "stack": "底层", "intel": "情报", "about": "说明" }, "reapply": "重新套用", "nginxLimits": "Nginx 限速", "notWritten": "未写", "modeValue": { "normal": "正常", "degraded": "降级", "ddos-protection": "DDoS 防护", "offline": "离线" }, "mode": "模式", "controlPlane": "控制面", "canApply": "可套用", "needRoot": "需 root", "writeOnly": "只写文件", "autoRunning": "运行中 · 间隔 {{sec}}s · 本小时 ban {{n}}", "autoOffManual": "关闭 — 只人手操作", "lastTick": "· 上次 {{t}}", "nextTick": "· 下轮 {{t}}", "on": "开", "off": "关", "open": "开啟", "ranAutomationTick": "已跑一輪自动化", "escalateHardened": "加固 ≥ 分数", "escalateAttack": "受攻击 ≥ 分数", "deescalateDaily": "回落日常 < 分数", "zeroOff": "0 关", "holdAfterEscalate": "升档后最少维持", "min5": "5 分", "min15": "15 分", "min30": "30 分", "hour1": "1 时", "hour2": "2 时", "hour6": "6 时", "presetOrCustom": "预设档 / 自定义", "autoBanMode": "自动封禁模式", "soft": "宽松", "normal": "标准", "aggressive": "积极", "custom": "自定义", "method": "方式", "banMethod": "封禁方式", "both": "两者", "scoreGte": "分数 ≥", "hitsGte": "请求 hits ≥", "hits429Gte": "429 相关 hits ≥", "scanHitsGte": "扫描路径 hits ≥", "cooldown": "冷却", "maxPerHour": "每小时上限", "scanInterval": "掃描间隔", "schedulerDefault": "scheduler 默认 120s", "collapse": "收起", "expand": "展开", "step": "步骤", "mechanism": "机制", "youCanTune": "你可调", "probe": "探测", "probeSignals": "外網／请求率／TCP／f2b／UFW", "escalateThreshold": "升档门槛", "emergency": "紧急", "neverAuto": "永不自动", "manualEmergency": "人手 EMERGENCY", "signalNetworkDown": "外网断", "signalHighReq": "高请求率", "signalDdos": "DDoS 啟發式", "signalTcp": "TCP 连接", "signalUfwOff": "UFW 关閉", "signalF2bBans": "fail2ban 封禁数", "weightHint": "{{label}} 权重 0–3", "detected": "（已检测）", "notSet": "（未设置）", "zonesComma": "Zones（逗号分隔）", "underAttackRequested": "已请求 Under Attack", "underAttackCleared": "已请求解除 UA", "autoBanOpen": "已开 · {{mode}} · 本小时 {{n}}/{{max}}", "autoBanClosed": "关閉 — 只靠手动／列表", "pausedNoExecute": "· 暂停（無 EXECUTE）", "circuitOpen": "· 已熔断", "autoBanModeLabel": "自動 ban 模式", "scanned": "已扫描", "bulkOps": "批量操作", "fromAccessLog": "来自 access log · 一键或批量封禁", "noSuspectIps": "暫时無可疑 IP", "noSuspectDesc": "有扫描／429 流量时会自动出现。亦可展开手动封禁。", "whitelistPlus": "白名单 + {{ip}}", "whitelistAdded": "已加入白名单", "activeBansTitle": "活跃封禁 ({{count}})", "activeBansDesc": "防護中心汇总 · 解封经 defense API（同 fail2ban-client）", "source": "来源", "unbanned": "已解封", "noBans": "未有封禁", "noBansDesc": "封禁后显示于此", "collapseQuickAdd": "收起快加", "quickAddOne": "快加一条", "removeItem": "移除 {{w}}", "updated": "已更新", "ipOrCidr": "IPv4／IPv6 或 CIDR", "autoBanWhitelistAdded": "已加入 auto-ban 白名单", "added": "已加入", "banIpPlaceholder": "要封禁的 IPv4 或 IPv6", "reason": "原因", "scanBrute": "扫描 / 暴力", "noSignals": "尚无信号", "pressReprobe": "按重新探测", "points": "分", "noTopIps": "暂无 Top IP", "topIpsAfterLog": "有 log 后会显示", "noManagedVhost": "无 managed vhost", "afterPresetMarker": "套用防护档後会注入 marker", "injected": "已注入 YSK_DEFENSE", "notInjected": "未注入", "noEvents": "暂无事件", "eventsAfterOps": "套用／封禁后出现", "geoipUpdated": "GeoIP 库已更新", "dbReady": "库就绪", "stale": "过旧", "older7d": ">7 日", "freshnessNa": "不适用", "freshnessMissing": "无库", "freshnessStale": "过旧", "freshnessFresh": "最新", "lastSuccess": "上次成功", "downloaded": "已下载", "missing": "缺失", "geoMode": "Geo 准入模式", "denyList": "封锁名单", "allowListHighRisk": "允许名单 · 高危", "autoUpdateDb": "自动更新库", "countriesSelected": "国家（已选 {{n}}）", "searchCountry": "搜索中文名或 ISO", "countryPlaceholder": "中国 / CN", "regionsSelected": "省／州（已选 {{n}}）", "regionsHint": "依已选国家顯示；可自定义 CN-GD", "pickCountryFirst": "建議先選国家以收窄列表", "customRegion": "自定义，例 CN-GD", "regionPlaceholder": "广东 / CA / 东京", "continentsSelected": "大陆（已选 {{n}}）", "continentsHint": "洲际（可选）", "continentPlaceholder": "亚洲 / EU", "asnsSelected": "供应商 ASN（已选 {{n}}）", "asnsHint": "雲／ISP；可自定义 ASN", "customAsn": "自定义 ASN，例 13335", "asnPlaceholder": "Cloudflare / 电信", "cityExample": "例：CN|Shenzhen 或 US|Ashburn", "policySaved": "政策已保存 · 国 {{c}} · 省 {{r}} · ASN {{a}}", "ipPolicySaved": "IP 准入政策已保存", "nginxGeoWritten": "已写入 nginx geo 片段", "ipAddress": "IP 地址", "lookupPlaceholder": "要查询的 IPv4 或 IPv6", "wouldBlock": "会拦截 · {{reason}} · {{matched}}", "wouldAllow": "放行 · {{reason}}", "lookupDone": "Lookup 完成", "item": "项目", "value": "值", "country": "国家", "region": "省／州", "city": "城市", "continent": "大陆", "coords": "坐标", "provider": "供应商", "policy": "政策", "block": "拦截", "allow": "放行", "matched": "命中", "applyStricterTitle": "套用較嚴防护档？", "applyStricterDesc": "可能开啟自動 ban。請確認白名单有你的 IP。", "confirmEmergencyTitle": "確認紧急防护档", "confirmEmergencyDesc": "紧急檔會極度限速。請確認白名单有你的 IP，並輸入 EMERGENCY。", "confirmString": "确认字符串", "applyEmergency": "套用紧急檔", "sectionPreset": "防护档", "sectionAutoPreset": "① 自動防护档", "sectionAutoBan": "② 自動封禁", "unban": "解封", "ban": "封禁", "banConfirmTitle": "封禁 {{ip}}？", "banConfirmMethod": "方法：{{method}}", "banConfirmUntilUnban": "会一直维持，直至你解除封禁（或 fail2ban 到期）。", "banConfirmDesc": "此 IP 会在主机上被封锁。请确认不是目前面板或工作阶段来源。", "wlRemovedUndo": "已从白名单移除 {{ip}}。5 秒内可复原。", "undo": "复原", "banSelectedConfirmTitle": "封禁已选 {{count}} 个 IP？", "banSelectedConfirmDesc": "以下地址会在主机上被封锁：{{ips}}", "save": "保存", "yes": "是", "no": "否", "oneClickSuggested": "一键套用建议档", "stackApply": "套用防護組合（UFW、fail2ban、建議檔）", "stackApplyDone": "已要求套用防護組合", "stackApplyHint": "會啟用 UFW 並套用 fail2ban 與建議防護檔。遠端面板請先確認不會把自己鎖在外面。", "viewPresets": "检视防护档", "suspectIpsCount": "可疑 IP {{count}}", "goBans": "去封禁", "singleEntryPrefix": "单一入口：", "singleEntryBody": " ", "emergencyNeverAuto": "紧急档永不自动", "writeOnlyBanner": "只写模式：系统套用需 EXECUTE=1 与 root。", "readiness": "就绪探测", "goTo": "前往", "presetGuide": "", "active": "作用中", "recommended": "建议", "useCarefully": "慎用", "preview": "预览", "stackToolsSee": "底层工具见「底層」分页 ·", "readinessCheck": "就绪检查", "automationMasterLabel": "自动化主开关", "runOneTick": "立即执行一轮", "suggestEmergencyBanner": "分数极高 — 系統建议緊急檔，但不会自动套用。请到应变人手确认。", "autoPresetDesc": "依威胁分自动切 日常／加固／受攻擊。紧急档永不自动。", "allowDeescalate": "允许自动回落（降档）", "autoBanThresholdHint": "選 soft/normal/aggressive 会自动填阈值；選「自定义」先可改分数／hits。無 YSK_EXECUTE 時只会记录，不会真 ban。", "sectionMechanism": "③ 机制说明", "lastNotes": "上次：{{notes}}", "sectionWeights": "④ 信号权重（0–3）", "weightsDesc": "默认 1；加大会令该类信号更容易推高威胁分。细范围用单选，不用手填数字。", "needCfToken": "需环境变量 CF_API_TOKEN", "cfOnEscalate": "。升至「受攻擊」或人手套用該檔時可打 API。", "ufwOnlyCf": "受攻击时 UFW 只放 CF 网段（+SSH）", "ufwOnlyCfHint": "会重置 UFW 并只允许 Cloudflare IP；需系统变更权限。", "saveZones": "保存 zones", "uaNow": "立即 Under Attack", "uaClear": "解除（→ high）", "stackRoleNote": "UFW 與 fail2ban 是防护中心底下的工具页（不再占侧栏一级）。侧栏只保留本页。", "fwUfwTitle": "防火墙 UFW", "fwStats": "端口策略 · 永久 DENY · 允许 {{allow}} · 拒绝 {{deny}}", "fwRulesProfiles": "UFW 规则与配置档", "f2bStats": "日志临时 ban · {{jails}} jails · 封锁中 {{banned}}", "jailsWhitelistPolicy": "Jail · 白名单 · 策略", "divisionTitle": "分工一览", "divisionUfw": "UFW = 开哪个端口、永久拒哪个 IP", "divisionF2b": "fail2ban = 扫 log 之后临时 ban", "divisionDefense": "本页应变／自動化 = 攻击时总控（限速档 + 自動 ban + 可疑列表）", "autoBanLabel": "自動 ban", "scanOnce": "扫一次", "selectedIps": "已选 {{count}} 個 IP", "banSelected": "封禁已选", "suspectIps": "可疑 IP", "selectAll": "全选", "alreadyBanned": "已封", "whitelist": "白名单", "bansWorkflow": "攻击应变：可疑列表 → 封禁／解封。Jail 策略、ignoreip、服務生命周期见", "f2bTool": "fail2ban 工具", "noSecondJail": "（不在这里再做第二套 jail 編輯）。", "autoBanWhitelistTitle": "自動 ban 白名单", "autoBanWhitelistDesc": "防護中心 auto-ban 豁免（会同步 fail2ban ignoreip.txt）。完整 ignoreip 在 fail2ban 工具 → 白名单。", "ufwOff": "UFW（未启用）", "ufwOffHint": "UFW 未运行 — 可用目标是 fail2ban。", "whitelistSyncHint": "面板 {{n}} 条 · fail2ban ignoreip 同步：{{sync}}", "whitelistSyncOn": "开", "whitelistSyncOff": "关（两边清单可能不一致）", "ignoreipWhitelist": "ignoreip 白名单", "notSetSuggestAdmin": "未设置（建议加入你的管理 IP）", "moreItems": "… 还有 {{n}} 项 · 見 fail2ban 白名单", "add": "加入", "manualBanTitle": "手动封禁", "methodFollows": "方式沿用上方选择（fail2ban / UFW）", "preferSuspectList": "多数情况用可疑列表即可。", "threatSignals": "威胁信号", "scoreSource": "分数來源 · 權重可調", "accessAuthSample": "access + auth 样本", "fullLogsAt": "完整 nginx／auth log 请到", "logCenter": "日志中心", "colScore": "分", "colHits": "次数", "col429": "429", "topIpsTitle": "热点 IP", "hitsCount": "{{n}} 次", "sampleWindowHint": "计数来自当前 access 与 auth 样本窗口，不是完整日志文件。", "banShort": "封", "vhostLimits": "Vhost 限速", "eventStream": "事件流", "eventKind": { "preset": "防护档", "auto_preset": "自动切档", "cloudflare_ua": "Cloudflare", "ban": "封禁", "unban": "解封" }, "hours48": "48 小时", "geoipDb": "GeoIP 数据库", "refreshStatus": "刷新状态", "updateDbNow": "立即更新库", "geoipSourceHint": "默认本机 GeoIP 数据库；可选 IPinfo token。", "retry": "重试", "loadingGeoip": "加载 GeoIP 状态…", "nextScheduledUpdate": "调度下次更新：{{at}}", "statusNotLoaded": "尚未加载状态", "load": "加载", "accessPolicy": "准入政策", "enable": "启用", "freeGranularity": "免费最高细分：国家 + 省／州 + ASN；城市可选政策（默认关，准确率较低）。供應商 = ASN。Whitelist 永远豁免。点 chip 移除。", "allowListDanger": "允许名單模式高危：不在名單的公網 IP（含未知 geo）會被擋。請確認管理端 IP 已加入封禁頁 whitelist。", "dailySchedule": "每日调度", "cityPolicy": "城市政策（低置信 · 可选）", "useCityAccess": "用城市做准入", "cityPolicyHint": "免费库城市准确率有限。格式 CN|Guangzhou；未勾选时城市只作查询展示。", "noCitiesYet": "尚未加入城市", "savePolicy": "保存政策", "applyNginxSnippet": "套用 Nginx 片段", "nginxSnippetHint": "需 nginx geoip2 模块才可在 HTTP 层拦截。", "testIp": "测试 IP", "lookup": "查询", "plusCountry": "+ 国家 {{v}}", "plusRegion": "+ 省 {{v}}", "plusCity": "+ 城市 {{v}}", "lastTickPrefix": "· 上次 {{t}}", "nextTickPrefix": "· 下轮 {{t}}", "cannotBanSelf": "不可封锁 {{ip}} — 这是本机、你的登录 IP 或 ignoreip", "selfIp": "本主机", "selfHostIp": "主机IP", "selfLoginIp": "您的登录IP", "showZeroScore": "显示 0 分", "hideZeroScore": "隐藏 0 分", "geoDraftOnly": "政策未启用 — 保存只写草稿，Nginx 不会执行，直到你勾选启用。", "geoNeedDb": "GeoIP 数据库丢失 - 首先更新 MMDB 文件", "uaNeedZones": "请先设定 Cloudflare zone", "selectAllCountriesWarn": "封锁名单模式下全选全部国家？这可能把本机与你的登录所在地一并封锁。", "badgeRecommendPreset": "以目前威胁水平，建议改用更强预设", "badgeAutomationOn": "自动化已开启", "badgeBanCount": "目前封锁数", "badgeGeoOn": "Geo 准入政策已启用", "badgeGeoNotReady": "GeoIP 数据库尚未就绪", "badgeIntelSignals": "目前计分的信号数", "signalActive": "运行中", "signalInactive": "未启用", "signalJails": "{{n}} 个 jail", "dbReadyHint": "已有 MMDB 文件", "dbNotReadyHint": "请先下载 GeoIP 数据库", "staleHint": "上次成功更新是否已超过 7 日", "draftBadge": "草稿", "banIsSelf": "此 IP 是目前面板来源或本机。", "banNotSelf": "此 IP 不是目前面板来源。", "geoSourceLocal": "本机 GeoIP 库（sapics + DB-IP）", "nginxPreviewHint": "此预设会写入的 Nginx 片段（仅预览）：" }, "publicFiles": { "notSet": "未设置", "quota": "配额", "reloadOnApply": "套用时", "path": "路径", "fileManager": "文件管理", "overview": "概览", "overviewDesc": "即将套用的设置（只读摘要）", "serverName": "服务器名称", "reloadNginx": "重载 Nginx", "reloadTry": "套用时尝试", "siteSettings": "站点设置", "siteSettingsDesc": "写入管理 conf；套用时可尝试 reload Nginx（套用后才可连）", "serverNameHint": "Nginx server_name，例如 files.example.com", "notes": { "noManagedConf": "尚无托管 Nginx 配置 — 单击“应用”", "notSynced": "托管conf存在，但不在/etc/nginx/conf.d下——使用YSK_EXECUTE再次以root身份申请" }, "quotaMiB": "配额（MiB）", "quotaHint": "可选；限制公开目录总量", "unlimited": "不限", "quotaInvalid": "请输入正整数 MiB，或选“不限”。", "serverNameRequired": "请填写服务器名称。", "serverNameInvalid": "请用主机名、万用字元或 IP，不可含空白或标点。", "applyHint": "套用成功只代表设置已写入；DNS、SSL 与防火墙需另行就绪才会对外服务。", "appliedOk": "已套用公开文件站点", "applyReload": "套用并重载 Nginx", "statusLive": "Nginx 已生效", "statusDraft": "草稿／待套用", "statusManagedOnly": "仅管理档", "statusNotApplied": "未套用", "nginxLive": "已在 conf.d", "nginxNotLive": "未进 conf.d", "openSite": "打开网站", "notLiveHint": "域名 404 多数是 conf 只写在 dataDir、未复制到 /etc/nginx/conf.d，或未 reload。请用 root + YSK_EXECUTE 再套用。未签发 SSL 前请用 http:// 打开。", "diskRoot": "磁盘根目录", "executeFlag": "执行", "asRoot": "根目录", "filesInRoot": "条目数", "managedConf": "管理 conf", "systemConf": "系统 conf.d", "autoindex": "目录列表（autoindex）", "liveSystemConf": "现行系统配置：{{path}}", "publicRootNote": "公开根目录：{{path}}", "applyConfirmTitle": "套用公开文件站点？", "applyConfirmDesc": "写入 Nginx server_name {{name}} 并重载 Nginx。", "serverNameMismatch": "现行配置为 {{live}}；表单为 {{draft}}。套用后会覆盖。", "liveName": "生效名称", "draftName": "草稿名称", "draftUnapplied": "此草稿尚未套用。Nginx 仍以生效名称对外。", "discardDraft": "舍弃草稿" }, "rbac": { "permissions": "权限", "permissionsDesc": "按角色加减能力；系统提供默认，可一键还原。", "rolePolicy": "角色策略", "dirty": "已自定义", "factory": "系统默认", "maxLevel": "最高等级", "save": "保存策略", "saved": "已保存 {{role}} 权限策略", "restoreRole": "还原此角色默认", "restoreAll": "还原全部角色", "restoreRoleTitle": "将 {{role}} 还原为系统默认？", "restoreRoleDesc": "将清除此角色的自定义能力，恢复出厂设置。", "restoreAllTitle": "将全部角色还原为系统默认？", "restoreAllDesc": "所有角色的自定义策略都会被清除。", "restoredRole": "已还原 {{role}}", "restoredAll": "已还原全部角色默认", "bandAllOn": "全开", "bandAllOff": "全关", "diffFromFactory": "与默认不同", "effectivePreview": "有效能力预览", "userOverrides": "个人加减", "extraGrants": "额外授予", "extraRevokes": "额外撤销", "restoreUserOverrides": "还原此用户覆盖", "restoreUserOverridesTitle": "清除 {{name}} 的个人权限覆盖？", "restoreUserOverridesDesc": "只清除额外授予/撤销，角色策略不变。", "overridesBadge": "有覆盖", "promoteAdminTitle": "提升为 Admin？", "promoteAdminDesc": "Admin 默认可管理用户、改权限、模拟登录、还原备份等。请确认。", "level": { "read": "读取", "write-low": "低危写入", "write-high": "高危写入", "destructive": "破坏性", "privilege": "特权" }, "cap": { "dashboardRead": "总览", "logsRead": "日志", "metricsRead": "监控指标", "projectsRead": "项目（读）", "mailRead": "邮件（读）", "dnsRead": "DNS（读）", "sslRead": "SSL（读）", "backupsRead": "备份（读）", "updatesRead": "更新（读）", "servicesRead": "服务（读）", "firewallRead": "防火墙（读）", "approvalsView": "审批（看）", "usersSelf": "个人设置/2FA", "projectsWrite": "项目创建改", "mailWrite": "邮箱/别名", "dbWrite": "数据库创建", "sslUpload": "上传证书", "filesProject": "项目文件", "approvalsRespond": "审批处理", "cronManage": "Cron 管理", "servicesControl": "服务控制", "updatesApply": "套件更新执行", "dnsApply": "DNS 应用", "sslIssue": "签发 SSL", "publishApply": "发布/Nginx", "firewallEdit": "防火墙编辑", "mailApply": "邮件应用", "runtimeTuning": "运行时调参", "mysqlConsoleWrite": "MySQL 写入", "projectsDelete": "删除项目", "dbDrop": "删除数据库", "backupsRun": "执行备份", "backupsRestore": "备份还原", "firewallFlush": "清空防火墙", "logsPurge": "清除日志", "usersManage": "用户管理", "packagesManage": "方案管理", "usersImpersonate": "模拟登录", "securityPolicy": "安全策略", "rbacPolicy": "权限策略", "settingsSystem": "系统设置", "auditExport": "审计导出", "securityApiKeysAdmin": "API 密钥管理", "networkBrowse": "主機代瀏覽", "networkVnc": "VNC 远程桌面管理", "validatorsRead": "验证者节点（读取）", "validatorsManage": "验证者节点管理", "validatorsWipe": "验证者节点清空数据", "dockerRead": "Docker（读取）", "dockerManage": "Docker 管理", "dockerWipe": "Docker 删除／清理" }, "aboutRoles": "角色说明（出厂默认）", "aboutRolesBody": "角色决定默认权限；用户可再覆盖个别能力。", "aboutQuota": "配额说明", "aboutQuotaBody": "方案配额目前以面板/主机总量为主闸，并非完整多租户硬隔离。用量条若显示 host totals，即表示全机统计。", "dangerPolicyTitle": "授予破坏性/特权能力？", "dangerPolicyDesc": "你正在为该角色加入 destructive 或 privilege 能力，或提高 maxLevel。请确认风险后再保存。", "needRbacPolicy": "需要 rbac.policy 才能编辑角色策略。", "adminLockedFull": "Admin 全开（锁定）", "adminLockedHint": "Admin 系统角色永远功能全开，不可削减。请改 Operator/Viewer/Agent，或对非 admin 用户做个人加减。", "maxLevelHint": "高于此等级的能力组会自动锁定，无法开启。", "capabilities": "能力清单", "capabilitiesHint": "勾选此角色可用的功能。橙点表示与系统默认不同。", "enabledCount": "已开 {{enabled}}／{{total}}", "bandAboveMax": "高于最高等级", "roleUnavailable": "此角色不可用", "dirtyHint": "已自定义（与系统默认不同）", "unsaved": "未储存", "unsavedHint": "此角色有未储存变更", "nothingToSave": "没有要储存的变更", "saveRole": "储存「{{role}}」政策", "discardTitle": "舍弃变更？", "discardDesc": "未保存的权限变更将会舍弃。" }, "readiness": { "cat": { "core": "控制面", "security": "权限与安全", "binaries": "系统软件", "hosting": "运行环境", "dns": "域名系统", "email": "邮件", "isolation": "项目隔离", "ops": "运维" }, "level": { "ready": "就绪", "degraded": "降级", "missing": "缺少", "unknown": "未知" }, "severity": { "critical": "关键", "recommended": "建议", "optional": "可选" }, "fix": "修复", "passed": "通过", "checkFailed": "就绪检查失败", "gatePass": "门槛通过 · {{pct}}%", "gateFail": "尚未达标 · {{pct}}%", "gateBlocked": "未通过／有阻挡 {{n}}", "executeOn": "已开", "executeOff": "未开", "blockers": "阻挡", "blockersHint": "「阻挡」是「缺少」中的关键项，不是额外检查。", "requireAdminTotp": "要求管理员双重验证政策", "listenBind": "监听位址", "item": { "admin2fa": "管理员双重验证" }, "dataDirPerms": "面板资料目录权限", "mode750": "权限 750", "totalChecks": "全部检查", "totalChecksHint": "就绪＋降级＋缺少＝此总数。阻挡是缺少项里的关键子集。", "probing": "探测中…", "reprobe": "重新探测", "exportReport": "导出报告", "exportStarted": "正在下載 {{name}}", "firstBlocker": "处理首个阻挡", "viewRecommended": "查看建议项", "loadingProbe": "正在探测主机能力…", "priorityTab": "优先修复", "checklistTab": "完整清单", "summaryTab": "摘要与快捷", "priorityTitle": "优先修复", "prioritySub": "按建议顺序处理；修好阻挡后再重新探测", "nItems": "{{count}} 项", "noHardBlockers": "无硬阻挡", "noHardBlockersTitle": "没有硬阻挡项", "prodGate": "生产门槛", "gatePassed": "已通过", "gateMaybePerm": "仍可能因权限未达标", "viewDegradedHint": "可查看「降级」建议项（邮件、DNS、可选 runtime）。", "viewDegraded": "查看降级项", "fullChecklist": "完整检查清单", "showing": "显示 {{shown}} / {{total}} 项", "filterAria": "状态筛选", "all": "全部", "category": "类别", "allCategories": "全部类别", "searchPh": "标题、说明、id、修复提示…", "quickCatAria": "快速类别", "noMatchTitle": "没有符合的项目", "noMatchDesc": "请清除搜索或更改筛选条件。", "resetFilters": "重置筛选", "summary": "摘要", "shortcuts": "快捷入口", "opsShortcutsAria": "运维捷径", "scHost": "主机设置", "scHostD": "hostname · 电源 · NTP", "scUnit": "控制面 unit", "scUnitD": "systemd 安装／启用", "scServices": "服务矩阵", "scServicesD": "nginx · DB · 生命周期", "scMetrics": "主机指标", "scMetricsD": "负载 · 内存 · 告警", "scProtection": "防护中心", "scProtectionD": "应变 · UFW · fail2ban", "policyNote": "政策：邮件 PTR／Port 25／域名商 DNS 永不自动宣称完成。HTTP 503 = 未达标但仍有完整报告（非假成功）。", "notProbedTitle": "尚未探测", "notProbedDesc": "按「重新探测」开始只读就绪检查。", "runCheck": "执行就绪检查", "reportFormatError": "就绪报告格式错误", "checkFailedHttp": "就绪检查失败（{{status}}）", "itemAdminPassword": "管理员密码强度", "itemAdminPasswordWeak": "{{count}} 个管理员仍标记 must_change_password／不安全 bootstrap — 上线前请更改", "itemAdminPasswordOk": "管理员账户无 bootstrap／弱密码标记", "itemAdminPasswordFix": "请到账号安全或用户页更改管理员密码", "itemListenBind": "控制平面监听绑定", "itemListenBindPublic": "可能对外监听（0.0.0.0/::）。建议 127.0.0.1 + 反向代理／防火墙", "itemListenBindLoopback": "建议 loopback 绑定（默认 127.0.0.1）", "itemDataDirPerms": "dataDir 权限", "itemDataDirWorldW": "请将 dataDir chmod 750（或 700），并 chown 给面板用户", "itemDataDirOtherR": "建议 dataDir chmod 750，避免其他用户读取控制平面 JSON", "itemRustToolchain": "Rust 工具链", "itemWebBuildFix": "按「立即修复」构建 Web 界面（本机需有 monorepo），或执行：pnpm --filter ysk-server-web build", "itemWebBuildManual": "本机无 monorepo／无已打包 SPA，无法一键修复。请在有源码的机器执行 pnpm --filter ysk-server-web build，再将 apps/web/dist/* 复制到 dataDir/web（例如 /var/lib/ysk-server/web），或设置 YSK_WEB_ROOT 后重启控制面。", "itemStateStore": "控制平面状态存储", "itemStateStoreSqliteHint": "可选：YSK_STORE=sqlite 使用 WAL document store", "itemBackupFreshness": "最近完整备份", "itemBackupNone": "未记录 last_backup_run — 请执行 backup all 或设置排程", "itemBackupFix": "ysk-server 全部备份 · 备份计划 --install", "itemFleetSessions": "Fleet agent 会话", "itemFleetNone": "单机可选；多边缘需 agent run + heartbeat", "itemFleetNoHb": "已注册但无 heartbeat — 请启动边缘 agent", "itemPdnsutil": "pdnsutil（PowerDNS）", "apachePort80Title": "Apache 与公开 80 端口", "apachePort80Detail": "Apache 正在监听 :80，Nginx 未占用公开 HTTP — 与「Nginx 作边缘」拓扑冲突。", "apachePort80Both": "Apache 与 Nginx 同时出现在 :80 — 请将 Apache 改绑 127.0.0.1:8080。", "apachePort80Ok": "Apache 运行中但未独占公开 :80（拓扑可接受）。", "apachePort80Fix": "安装脚本已有 rebind；可停用占用 80 的 Apache vhost，或 reload 后用 ss -lntp 确认。", "fixNow": "立即修复", "fixFailed": "修复失败", "fixDone": "已修复 dataDir 权限（chmod 750）", "fixDoneWebUi": "已构建／安装 Web 界面", "rootLabel": "超级用户", "techDetails": "技术细节", "missingOwner": "未分配面板所有者（包配额归属）", "notOsProvisioned": "操作系统用户/主目录尚未配置", "isolationPendingOs": "与专案状态相同：待建立系统用户。请到隔离分页建立系统用户与主目录。", "ondrejNone": "未检测到 ondrej Launchpad PHP 源", "ondrejFound": "发现旧版 ondrej/php 源与packages.sury.org 冲突：{{paths}}", "ondrejTitle": "PHP apt源（ondrej残差）", "systemctlActive": "服务正在运行", "systemctlStatus": "服务状态：{{status}}", "binInPath": "路径中的 {{bin}}", "leftoverApache": "Apache 剩余的默认站点", "leftoverVsftpd": "vsftpd 单元失败", "leftoverCli": "过时的剩余 CLI", "leftoverNginx": "Nginx 包罗万象缺失", "leftoverDovecot": "Dovecot TLS 指出缺少证书", "leftoverOther": "主机剩余物", "leftoverApply": "剩余的适用", "isolationOwnerDegrades": "缺少owner_user_id会影响程序包配额属性 - 状态已降级，未就绪。" }, "redis": { "neverExpire": "永不过期", "ttlSeconds": "{{ttl}} 秒", "ttlMinutes": "{{n}} 分钟", "ttlHours": "{{n}} 小时", "ttlDays": "{{n}} 天", "typeString": "字符串", "typeHash": "哈希", "typeList": "列表", "typeSet": "集合", "typeZset": "有序集合", "keysLoadFailed": "无法加载鍵列表", "writeFailed": "写入失败", "saved": "已保存", "deleted": "已删除", "offline": "离线", "connections": "连接数", "totalKeys": "总键数", "writable": "写入", "connected": "已连接", "notConnected": "未连接", "keys": "鍵", "selected": "选中", "softwareMissing": "Redis 所需软件尚未安装", "notConnectedTitle": "尚未连上 Redis", "installThenStart": "请先使用上方横幅一键安装 Redis，再启动服务。", "installedNotConnected": "服务已安装但未连上，请启动服务后即可浏览鍵与内容。", "keysCountSuffix": " · {{n}} 个鍵", "searchPlaceholder": "搜索鍵名，例如 user:* 或 *", "searchKeys": "搜索鍵", "scanHint": "使用 SCAN，不是 KEYS。最多回传 {{n}} 个键 — 大型库勿用 *。", "scanCapped": "只显示首 {{n}} 个符合项。", "rows": "{{n}} 筆", "content": "内容", "noMatchingKeys": "沒有符合的鍵", "dbEmpty": "数据库 {{db}} 目前是空的。", "noMatchPattern": "沒有符合「{{pattern}}」的鍵。", "opsResult": "操作结果", "addStringKey": "新增字符串鍵", "writeToDb": "写入 Redis 数据库 {{db}}（实时生效，请謹慎）", "keyName": "鍵名", "keyNameHint": "建议用冒号分层，例如 session:user:1", "ttlLabel": "过期时间（秒）", "ttlHint": "可留空表示永不过期", "m1": "1 分", "m5": "5 分", "h1": "1 时", "d1": "1 日", "d7": "7 日", "customSeconds": "自定义秒数", "stringValue": "字符串值，会以 SET 写入", "stringContent": "字符串内容", "deleteKeyTitle": "删除此鍵？", "deleteKeyDesc": "确定从数据库 {{db}} 删除「{{key}}」？此操作无法复原。", "installedOk": "Redis 已安装", "startedOk": "Redis 已启动", "memory": "内存", "addKey": "新增鍵", "dbLabel": "数据库 {{i}}", "keysInDb": " · {{n}} 个鍵", "dbOptionKeys": "数据库 {{i}} · {{n}} 个键", "dbOptionEmpty": "数据库 {{i}} · 空", "dbRange": "共 {{n}} 个庫（0–{{max}}）。", "serviceLink": "在服务设置加減数量", "dbsWithData": "有资料的庫（快捷）", "keysShort": "{{k}} 鍵", "keyList": "鍵列表", "pickKey": "从左側选擇一个鍵，即可查看内容。", "ttlPrefix": "过期：{{ttl}}", "writeLiveHint": "此操作直接写入执行中的 Redis，无法从面板一鍵还原。", "refPath": "参考：{{path}}", "dbEmptyMark": " · 空", "noRequirepass": "保护模式已开，但 requirepass 为空或未读到 — 实际无密码。", "insecureShort": "不安全（无密码）", "setRequirepass": "设定密码", "generateRequirepass": "产生并套用密码", "generateRequirepassTitle": "产生 Redis 密码？", "generateRequirepassDesc": "会写入 requirepass 并重启 Redis。密码只显示一次。主机变更需要 EXECUTE。", "generateRequirepassDone": "已套用 Redis 密码", "generatedOnce": "已产生密码（只显示一次）：{{password}}", "rdbOnlyLossHint": "AOF 关闭且 RDB 开启。重启或崩溃可能丢失最近写入。", "dirDataContainer": "/data（容器）", "dirHostDefault": "/var/lib/redis", "dirDefaultInstance": "/var/lib/redis/default", "dirDataWarn": "/data 多用于容器；面板无法确认此主机是否存在该路径。", "saveOff": "禁用快照（不推荐）", "saveOffWarn": "空保存字符串会关闭 RDB 快照。如果 AOF 也关闭，则崩溃可能会丢失所有数据。", "dirMoveWarn": "更改目录不会移动 dump.rdb / AOF。下次启动将按原样使用新路径。", "passwordUnset": "未在服务上设置", "passwordSetHidden": "设置（未显示）" }, "resources": { "created": "已创建", "updated": "已更新", "deleted": "已删除", "applyDone": "应用完成", "applyIncomplete": "应用未完成" }, "roles": { "admin": "管理员", "operator": "操作员", "viewer": "检视者", "agent": "代理人" }, "runtime": { "probed": "已探测", "notProbed": "未探测", "probe": "探测", "read": "已读取", "targetVersion": "目标版本", "nodeMissing": "Node.js 尚未安装", "probeResult": "探测结果", "readonly": "只读", "installNode": "安装 Node.js", "needExecuteAdmin": "需系统变更权限与管理员", "nodeMajor": "Node 主版本", "nodeMajorHint": "LTS 建议 20 或 22；与项目运行时对齐", "installedNode": "已安装 Node {{version}}", "installPm2": "安装 PM2", "installPm2Desc": "一键 npm install -g pm2（项目进程管理）。需先有 Node.js。", "installPm2Btn": "一键安装 PM2", "reinstallPm2": "重新安装 PM2", "installedPm2": "已安装 PM2", "pm2Status": "PM2 状态", "pm2Ready": "已就绪", "pm2MissingShort": "未安装", "pm2NeedNodeFirst": "请先安装 Node.js，再安装 PM2。", "pm2InstallHint": "以 root／系统变更权限执行 npm -g 安装；安装后项目可选 PM2 部署。", "pm2ReadyHint": "PM2 已在 PATH；项目部署可使用 PM2 进程模式。", "opsResult": "操作结果", "unlimited": "无限", "zeroUnlimited": "0 无限", "m24": "24 分", "h1": "1 时", "d1": "1 日", "d7": "7 日", "phpIniLoadFailed": "加载 php.ini 失败", "loaded": "已加载", "default": "预设", "phpMissing": "PHP 尚未安装", "overview": "总览", "fpmSites": "FPM / 站点", "tools": "工具", "about": "说明", "installPhp": "安装 PHP", "versionAlreadyInstalled": "版本 {{version}} 已在主机上，无需再安装", "installedVersionBtn": "已安装 {{version}}", "newerVersionAvailable": "当前 {{current}}；面板支持更新版本：{{newer}}（可选后安装）", "switchToNewer": "改选 {{version}}", "installedVersionsHint": "已检测：{{list}}", "phpInstallHint": "需系统变更权限与管理员；可勾选常用扩展（包名随版本变：php8.2-mysql、php8.3-gd…）", "phpVersion": "PHP 版本", "phpExtHint": "选择要一并安装的扩展。不同 PHP 版本对应不同 apt 包名（例：php8.2-mysql ≠ php8.3-mysql）。GD 即旧称 gd2。", "phpExtSelect": "PHP 扩展 / 插件", "phpExtSelectHint": "软件包会装成 php{{version}}-…；核心 FPM/CLI 必装；已装项不出现在勾选清单", "phpExtRequired": "必装（核心）", "phpExtRecommended": "常用默认", "phpExtSelectAll": "全选扩展", "phpExtCoreOnly": "只装核心", "phpExtSearch": "搜索扩展（mysql、gd、redis…）", "phpExtEmpty": "无匹配的扩展", "pluginsSelect": "常用工具 / 插件", "pluginsSelectHint": "勾选后与运行时一并安装（例如 Node 的 PM2、Python 的 Poetry）", "pluginsSearch": "搜索工具（pm2、poetry、maven…）", "pluginsEmpty": "无匹配的工具", "pluginsRecommended": "常用默认", "pluginsSelectAll": "全选可安装", "pluginsNone": "不安装工具", "pluginsInstallNote": "勾选后点「安装选定工具」。首次装 runtime 时可连工具一起装；已装 runtime 请只点上方按钮。", "installPluginsOnly": "安装选定工具（{{version}} 已有）", "installExtOnly": "安装选定扩展（PHP {{version}} 已有）", "pluginAlreadyOnHost": "主机已有", "installAddonsOnly": "安装选定插件／扩展（{{version}} 已有）", "remoteNewerHint": "已装 {{current}} · 上游最新 {{remote}}{{source}}", "installedPhp": "已安装 PHP {{version}}", "nextSteps": "下一步", "suggestedFlow": "建议流程", "globalPhpIni": "全局 php.ini", "globalPhpIniDesc": "每一列一个设置值（表单）。写入管理档后可「应用到系统」或于项目部署注入 pool", "managePath": "管理档路径", "loading": "加载中", "probing": "探测中", "noBinaryPath": "没有二进制路径", "hostDefaultError": "主机预设不可用", "pm2Tick": "{{at}} · 专案 {{projects}} · PM2 {{pm2}} · 运行 {{run}}", "cannotLoadSettings": "无法加载设置表", "reloadFailed": "重新加载失败", "sensitive": "敏感设置，请小心", "on": "开启", "off": "关闭", "customNumber": "自定义数字", "customExample": "自定义，例 768M", "advancedExtra": "高级：额外鍵与 raw", "advancedExtraDesc": "catalog 未列的指令；每行 key=value；raw 直接附加到 ini 尾", "extraDirectives": "额外指令", "extraDirectivesHint": "每行一个 key=value（非上方表单已有的鍵）", "rawAppend": "直接附加到 ini 档末尾", "phpIniSaved": "已保存 php.ini", "appliedSystem": "已应用到系统", "demoVhost": "系统工具：示范 vhost / Pool", "demoVhostDesc": "高级／调试用；日常开站请到 项目 → 部署", "domain": "网域", "domainRequired": "套用 vhost 前请填写有效网域。", "vhostServerName": "虚拟主机 server_name", "poolName": "Pool 名称", "poolNameHint": "手填识别名（示范）；项目路径会用 ysks_* 用户", "enableReload": "启用并重载服务", "enableReloadHint": "需要系统变更权限；关闭則只写管理档", "applyFailed": "应用失败", "phpVhostApplied": "已应用 PHP vhost / pool", "composerTools": "Composer / WP-CLI / 模块", "composerToolsDesc": "即时探测 PATH 上工具与 php -m（只读）", "toolsProbed": "已探测工具", "notFound": "未找到", "available": "可用", "moduleCount": "模块数", "installNodeV": "安装 Node {{v}}", "installPhpV": "安装 PHP {{v}}", "installPythonV": "安装 Python {{v}}", "installGoV": "安装 Go {{v}}", "installRustV": "安装 Rust {{v}}", "pythonMissing": "Python 尚未安装", "goMissing": "Go 尚未安装", "rustMissing": "Rust／cargo 尚未安装", "tuneLoadFailed": "加载调校失败", "availableCount": "{{n}} 可用", "notDetected": "未探测到", "binaryPath": "二进制路径", "targetMissing": "目标版本未安装", "targetMissingHint": "目标 {{version}} 不在本机。请改绑已安装的版本，或先安装此版本。", "target": "目标", "tune": "调校", "loadedShort": "已载", "host": "主机", "tabOverviewInstall": "总览", "tabTune": "执行调校", "probeReadonlyInstall": "只读 · 安装成功后请再探测确认", "hostDefault": "主机预设", "panelSupport": "面板支援", "ready": "已就绪", "notDetectedYet": "尚未偵测到", "install": "安装", "installHint": "需系统变更权限与管理员；安装 toolchain ≠ 项目已对外", "panelTune": "面板调校", "panelTuneDesc": "写入管理档；部署时注入 env", "bindVersion": "绑定版本", "onePerRow": "每行一项设置", "zeroAll": "0 全", "custom": "自定义", "extraEnv": "额外环境变量", "extraEnvHint": "一行 KEY=value", "customEnv": "自定义 env", "envPreview": "Env 预览", "envPreviewDesc": "保存后／上次加载的合併结果", "unsupported": "不支持", "tuneSaved": "已保存调校", "nodeDetectedHint": "主机上已检测到 Node；重装会按权限执行，可能覆盖现有安装。", "nodeProbeAfter": "安装完成后请再「重新探测」确认路径与版本。", "installNodeVBtn": "安装 Node {{version}}", "installPhpVBtn": "安装 PHP {{version}}", "phpIniSteps1": "在 php.ini 分页设计全局数值并保存", "phpIniSteps2": "可选：应用到系统（写入 /etc/php/…/conf.d，需 root）", "phpIniSteps3": "项目部署时会把合併后 ini 写入 FPM pool 的 php_admin_*", "phpIniSteps4": "项目可再覆写个别鍵（项目 → 部署）", "phpIniNote": "变更会先存到面板 dataDir；「应用到系统」才复制到 /etc/php 并 reload FPM。项目 pool 会在部署时注入 php_admin_value。", "phpIniLoading": "正在读取 php.ini 设置表单…", "phpIniEmpty": "catalog 为空 — 请重新加载或确认 API 已启动。", "reloadForm": "重新加载表单", "savePhpIni": "保存 php.ini", "prodUseProjects": "生产站请用「项目」路径", "prodPathDesc": "：创建 PHP 项目 → 部署／应用 FPM（pool = 项目 Linux 用户 + 隔離 home）。本页系 ", "systemDemo": "系统级 demo／工具", "demoNotBind": "（手填 pool 名），不会自动绑项目隔離。php.ini 全局预设请用「php.ini」分页。", "applyOkWritten": "应用成功 = 文件已写入（written）。生产请优先用项目部署，确保 User=项目 Linux 用户。", "applyPhpVhost": "应用 PHP vhost / pool", "applyPhpVhostTitle": "需要确认 - 写入池/虚拟主机文件", "applyPhpVhostDesc": "将写入 {{pool}} 池和 {{domain}} 虚拟主机。重新加载服务：{{reload}}。", "reprobeTools": "重新探测工具", "pressReprobe": "按「重新探测工具」加载", "installNodeLabel": "安装 Node {{v}}", "installPhpLabel": "安装 PHP {{v}}", "installPythonLabel": "安装 Python {{v}}", "installGoLabel": "安装 Go {{v}}", "installRustLabel": "安装 Rust {{v}}", "readShort": "已读", "pressReprobeHost": "按「重新探测」加载主机版本矩阵", "installScriptNote": "写入安装脚本后，有权限才会真正执行。调校在「执行调校」分页；重新部署项目后才进进程。", "envNote": "Node：max-old-space-size 等会合成 NODE_OPTIONS。Go／Python／Rust 对应官方环境变量。", "saveTune": "保存调校", "pressReprobeLoad": "按「重新探测工具」加载", "installJavaLabel": "安装／更新 OpenJDK", "installKotlinLabel": "安装／更新 Kotlin", "installBunLabel": "安装／更新 Bun", "javaMissing": "未检测到 Java（OpenJDK）", "kotlinMissing": "未检测到 Kotlin 编译器", "bunMissing": "未检测到 Bun", "phpIniCatalog": { "groups": { "resource": { "title": "资源限制", "description": "内存、执行时间与输入限制" }, "upload": { "title": "上传与 POST", "description": "文件上传与 POST 体积" }, "session": { "title": "会话", "description": "会话存储与 cookie" }, "error": { "title": "错误与日志", "description": "显示错误、记录与报告等级" }, "opcache": { "title": "OP缓存", "description": "字节码缓存" }, "security": { "title": "安全与路径", "description": "远程文件、暴露信息、函数禁用" }, "locale": { "title": "时区与字符" }, "misc": { "title": "其他常用" } }, "fields": { "memory_limit": { "label": "内存上限", "hint": "例如 128M、256M、512M、-1（无限）" }, "max_execution_time": { "label": "最长执行时间", "hint": "秒；0 = 无限（命令行）" }, "max_input_time": { "label": "最长输入时间", "hint": "秒；解析请求的最长时间" }, "max_input_vars": { "label": "最多输入变量", "hint": "$_GET / $_POST / $_COOKIE 变量上限" }, "max_input_nesting_level": { "label": "输入嵌套层级" }, "file_uploads": { "label": "允许上传文件" }, "upload_max_filesize": { "label": "单文件上限" }, "post_max_size": { "label": "POST 体积上限", "hint": "应 ≥ 单文件上限" }, "max_file_uploads": { "label": "单次最多文件数" }, "session_save_handler": { "label": "会话存储方式" }, "session_gc_maxlifetime": { "label": "会话存活秒数", "hint": "秒" }, "session_cookie_httponly": { "label": "Cookie 仅 HTTP（HttpOnly）" }, "session_cookie_secure": { "label": "Cookie 仅 HTTPS（Secure）", "hint": "HTTPS 站点建议开启" }, "session_use_strict_mode": { "label": "会话严格模式" }, "display_errors": { "label": "显示错误（页面）", "hint": "生产环境请关闭" }, "display_startup_errors": { "label": "显示启动错误" }, "log_errors": { "label": "记录错误到日志" }, "error_reporting": { "label": "错误报告等级", "hint": "或整数如 32767" }, "error_log": { "label": "错误日志路径", "hint": "留空用系统默认；可填绝对路径" }, "opcache_enable": { "label": "启用 OPcache" }, "opcache_enable_cli": { "label": "命令行启用 OPcache" }, "opcache_memory_consumption": { "label": "OPcache 内存（MB）", "hint": "单位：MB" }, "opcache_interned_strings_buffer": { "label": "字符串 intern 缓冲（MB）" }, "opcache_max_accelerated_files": { "label": "最多缓存文件数" }, "opcache_validate_timestamps": { "label": "检查文件变更", "hint": "生产可关并手动重载" }, "opcache_revalidate_freq": { "label": "检查间隔（秒）" }, "allow_url_fopen": { "label": "允许 URL 当文件打开" }, "allow_url_include": { "label": "允许 URL include" }, "expose_php": { "label": "暴露 PHP 版本头" }, "open_basedir": { "label": "open_basedir 路径限制", "hint": "留空不限制；多路径用 : 分隔" }, "disable_functions": { "label": "禁用函数列表", "hint": "逗号分隔；过严可能弄坏软件包" }, "date_timezone": { "label": "时区" }, "default_charset": { "label": "默认字符集" }, "short_open_tag": { "label": "允许短开标签（