{
  "enabled": "已启用",
  "disabled": "未启用",
  "notInstalled": "未安装",
  "running": "运行中",
  "notRunning": "未运行",
  "failed": "失败",
  "activating": "启动中",
  "unitMissing": "单元不存在",
  "loadFailed": "加载失败",
  "opFailed": "操作失败",
  "installedEnabled": "已安装并嘗试启用",
  "unitTemplateWritten": "已写入 unit 范本",
  "writeTemplate": "写入管理目录范本",
  "writeTemplateDesc": "于 dataDir/systemd 产生 ysk-server.service（不会改 /etc）",
  "templateExists": "管理目录范本已存在",
  "installEnable": "安装到 /etc/systemd 并启用",
  "installEnableDesc": "复制 unit → daemon-reload → enable --now",
  "needExecuteRoot": "需 YSK_EXECUTE 与 root",
  "serviceNotRunning": "服务未运行",
  "serviceNotRunningHint": "unit 可能已安装但 inactive — 可再「安装并启用」或于服务矩陣操作",
  "controlRunning": "控制面服务运行中",
  "unlockApply": "解锁系统应用能力",
  "startAsRoot": "以 root 启动并设置 YSK_EXECUTE=1",
  "status": "状态",
  "bootEnabled": "开机自启",
  "on": "开",
  "off": "关",
  "yes": "是",
  "no": "否",
  "canInstall": "可安装",
  "copyEnable": "复制到 /etc/systemd 并 enable --now",
  "needExecuteRootShort": "需要 EXECUTE + root",
  "probing": "探测 systemd 状态…",
  "suggestedSteps": "建议步骤",
  "install": "安装",
  "policy": "政策",
  "about": "说明",
  "exists": "存在",
  "missing": "不存在",
  "notWritten": "尚未写入",
  "related": "相关",
  "opsResult": "操作结果",
  "writeTemplateOnly": "僅写入范本",
  "installAndEnable": "安装并启用",
  "stepReport": "按步回报",
  "installEnableShort": "安装启用",
  "cannotInstall": "目前无法真正安装到系统：需要 ",
  "andRoot": " 与 root。「僅写入范本」仍可生成管理目录文件。见 ",
  "probeDetail": "探测详情",
  "probeDetailSub": "真实 systemd 状态与磁盘上的 unit 文件",
  "unit": "单元",
  "manageTemplate": "管理范本",
  "installOps": "安装操作",
  "twoModes": "两种模式用途不同 — 请按环境选擇",
  "writeOnlyTitle": "僅写入范本",
  "writeOnlyBody": "生成管理目录 unit 档。适合先检视内容、或无 root 时预先准备。",
  "willNotEnable": "不会 enable 服务。",
  "writeTemplateBtn": "写入范本",
  "installEnableTitle": "安装并启用",
  "installEnableBody": "复制到 /etc/systemd/system、daemon-reload、enable --now。需 root + EXECUTE。",
  "policyWrite": "僅写入范本 — 只写 dataDir，不动 /etc",
  "policyInstall": "安装并启用 — cp + daemon-reload + enable",
  "policyBlocked": "未开 EXECUTE 或非 root → 明确 blocked，不假成功",
  "policyNotEqual": "写入范本 ≠ 服务已启用 ≠ 已在监听端口",
  "shortcutPower": "EXECUTE / 电源",
  "shortcutOther": "其他 unit",
  "cannotInstallFull": "目前无法真正安装到系统：需要 YSK_EXECUTE=1 与 root。「僅写入范本」仍可生成管理目录文件。见 ",
  "policyWriteFull": "僅写入范本 — 只写 dataDir，不动 /etc",
  "policyNotEqualFull": "写入范本 ≠ 服务已启用 ≠ 已在监听端口",
  "controlPlaneUnit": "控制面服务单元",
  "kpiRuntime": "运行状态",
  "rawStateHint": "原始 unit 状态见提示",
  "bootHint": "是否开机自启",
  "kpiBoot": "开机自启",
  "kpiCaps": "套用能力",
  "capsReady": "可安装到系统",
  "capsBlocked": "无法套用",
  "unitFiles": "单元文件",
  "unitFilesSub": "系统路径与面板管理模板（用途不同）",
  "systemUnitFile": "系统单元（/etc）",
  "systemUnitHint": "systemd 实际加载的 unit；安装并启用后会出现在此。",
  "managedUnitFile": "管理模板（dataDir）",
  "managedUnitHint": "面板写入的模板，不等于已安装到系统。",
  "managedPathHint": "dataDir/systemd/ysk-server.service",
  "fragmentPath": "systemd 片段路径",
  "fromSystemd": "systemd 回报",
  "pid": "PID{{pid}}",
  "nextAction": "建议下一步",
  "controlRunningHint": "systemctl is-active = 活动",
  "aboutPolicyTitle": "套用政策",
  "aboutPolicySub": "写模板与安装到系统是两步；装完仍可重跑，不代表未完成。",
  "policyInstallFull": "安装并启用：复制到 /etc/systemd/system、daemon-reload、enable --now。需 root + EXECUTE。",
  "policyBlockedTitle": "无权限时封锁",
  "policyNotEqualTitle": "状态不等同"
}