{ "pageDesc": "VNC server & client", "result": "VNC operation result", "installed": "Installed", "notInstalled": "Not installed", "stackBins": "{{bins}}", "stackMissing": "Missing tools", "executeOn": "YSK_EXECUTE on", "executeOff": "YSK_EXECUTE off", "statAccounts": "Accounts", "statRunning": "Running", "statClients": "Client profiles", "statEndpoint": "Host", "goAccounts": "Accounts", "goClient": "Client", "goInstall": "Install", "accountsEmptyTitle": "No accounts", "accountsEmptyDesc": "Create an account to start", "clientPathHint": "Both paths open VNC in the browser. They differ by target semantics and copy (both still TCP-proxy via the panel).", "clientPathCompare": "“User-reachable”: public hostnames (e.g. hermes.example.com:5901). “Server proxy”: LAN / DC targets only this host can reach. TCP is probed from this server before connect.", "clientEmptyTitle": "No clients", "clientEmptyDesc": "Add remote host:port", "openInBrowser": "Open in browser", "pathUserReachable": "User-reachable endpoint", "pathServerProxy": "Via server proxy", "pathUserReachableShort": "User-reachable", "pathServerProxyShort": "Server proxy", "pathUserReachableHint": "For public hostnames or targets as configured (e.g. example.com:5901). Browser goes through the panel; this host must open TCP to that address.", "pathServerProxyHint": "For LAN or targets only the control-plane server can reach. Traffic is proxied via this server’s network. Optional connect host overrides the TCP address (e.g. display name vs 10.x).", "connectHost": "Connect host (optional, server proxy)", "connectHostHint": "TCP address the control plane opens (LAN IP). Leave empty to use Remote host above.", "pathBrowser": "User-reachable endpoint", "pathHostViewer": "Via server proxy", "hostViewer": "Via server proxy", "needViewerOptional": "TigerVNC Viewer (optional, not for browser path)", "viewerStackOptional": "In-browser VNC does not need desktop vncviewer. The Viewer package below is optional system maintenance only.", "viewer": { "minting": "Preparing session…", "connecting": "Connecting…", "connected": "Connected", "disconnected": "Disconnected", "error": "Connection failed", "idle": "Idle", "closed": "Closed", "minting_state": "Preparing", "reconnect": "Reconnect", "disconnect": "Disconnect", "fullscreen": "Fullscreen", "fit": "Fit window", "oneToOne": "1:1", "cad": "Ctrl+Alt+Del", "password": "VNC password", "passwordPrompt": "Password required", "sendPassword": "Send password", "securityFailure": "Authentication failed", "canvasLabel": "VNC desktop: {{name}}", "clipboardPaste": "Paste → remote", "clipboardPanel": "Clipboard", "clipboardHint": "Sync text between this browser and the remote desktop.", "clipboardLocal": "Send to remote", "clipboardLocalPh": "Paste or type text to send into the VNC session", "clipboardRemote": "From remote", "clipboardRemotePh": "Text copied on the remote desktop appears here", "clipboardSend": "Send to remote", "clipboardCopy": "Copy locally", "clipboardToRemote": "Clipboard sent to remote", "clipboardToRemoteHint": "Paste browser clipboard into the remote session", "clipboardFromRemote": "Remote clipboard copied to this browser", "clipboardFromRemoteManual": "Remote clipboard updated — open Clipboard panel to copy", "clipboardEmpty": "Nothing to paste — copy text first or type below", "clipboardReadDenied": "Browser blocked clipboard read — paste into the panel and Send", "clipboardNoRemote": "No text received from remote yet", "clipboardCopiedLocal": "Copied to this browser", "quality": "Quality", "qualityHint": "Image quality vs bandwidth (JPEG / compression)", "qualityLow": "Low (save data)", "qualityBalanced": "Balanced", "qualityHigh": "High", "qualityMax": "Max quality", "passwordPromptHint": "This desktop requires a VNC password — enter it below.", "errNeedExecute": "Cannot start the desktop: server needs root and YSK_EXECUTE enabled.", "errTicket": "Session ticket expired or invalid — press Reconnect.", "errBusy": "Too many VNC sessions on this panel — close another and retry.", "errRefused": "Nothing is listening on {{host}}:{{port}} (connection refused). Is VNC running and reachable from this server?", "errRefusedGeneric": "Connection refused — check that VNC is running and the port is correct.", "errTimeout": "Timed out connecting to {{host}}:{{port}}. Check firewall / network path from this server.", "errTimeoutGeneric": "Connection timed out — check network and firewall.", "errDns": "Cannot resolve host name «{{host}}».", "errDnsGeneric": "Host name could not be resolved.", "errNet": "Network unreachable for {{host}}:{{port}}.", "reconnecting": "Connection dropped — reconnecting ({{n}}/{{max}})…", "idleHint": "Session has been idle for a while. The remote desktop may lock; move the mouse or reconnect if needed.", "idleDismiss": "Still here", "sessions": "Open VNC sessions", "sessionCount": "{{n}} / {{max}} sessions", "sessionLimit": "At most {{max}} VNC sessions at once — close one first.", "closeSession": "Close session {{name}}", "shareLink": "Share link", "shareCopied": "View-only share link copied (valid ~1 hour)", "shareFailed": "Could not create share link", "shareTitle": "Shared VNC view", "shareGuest": "Shared desktop", "shareMissing": "Missing share token", "shareExpired": "This share link is invalid or has expired", "viewOnlyBadge": "View only", "screenshot": "Screenshot", "screenshotSaved": "Screenshot downloaded", "screenshotFailed": "Could not capture screenshot", "screenshotNoCanvas": "Display not ready for screenshot", "record": "Record", "recordStop": "Stop rec", "recordHint": "Record desktop to WebM (max 60s)", "recordStarted": "Recording… click Stop rec or wait 60s", "recordSaved": "Recording downloaded", "recordFailed": "Could not record", "recordUnsupported": "This browser cannot record the canvas", "connectingHint": "Opening a secure tunnel to the desktop…", "reconnectHint": "Press Reconnect to try again, or check the remote host and port." }, "installHint": "TigerVNC → noVNC; XFCE optional", "needTigerVnc": "TigerVNC required", "needXfceFirst": "Install XFCE first", "needSessionRunning": "Session is not running — start it first", "needNovnc": "noVNC required", "needXfce": "XFCE (optional)", "needViewer": "Viewer (optional)", "needViewerOrNovnc": "Viewer or noVNC", "settingsHint": "Defaults for new accounts", "settingsNeedStack": "These defaults apply when TigerVNC (and XFCE if selected) are installed. Install them on the Install tab first.", "clientNeedNovnc": "Open in browser needs noVNC. Install it on the Install tab before adding remotes you expect to open here.", "defaultDesktop": "Default desktop", "defaultGeometry": "Default resolution", "defaultDepth": "Colour depth", "defaultRfbBind": "VNC (RFB) listen range", "defaultAutostart": "Autostart sessions", "autostartLabel": "Start on boot", "settingsSaved": "VNC defaults saved", "tab": { "overview": "Overview", "accounts": "Accounts", "client": "Client", "install": "Install", "settings": "Settings", "about": "About" }, "desktop": { "xfce": "XFCE (full desktop)", "terminal": "Terminal" }, "bind": { "localhost": "Localhost only (noVNC / tunnel)", "all": "All interfaces (direct RFB — open firewall)", "localhostShort": "localhost", "allShort": "0.0.0.0" }, "accountListTitle": "VNC accounts ({{count}})", "accountListDesc": "One Linux user per account", "createAccount": "+ Create account", "createAccountTitle": "Create VNC account", "createAccountDesc": "Dedicated yskvnc_* user", "createAccountBtn": "Create account", "editAccountTitle": "Edit VNC account", "editAccountDesc": "Linux user {{user}} · display :{{display}}", "setPassword": "Password", "setPasswordTitle": "Set VNC password", "setPasswordDesc": "Update VNC login password for {{address}}", "newPassword": "New password", "confirmPassword": "Confirm password", "passwordHint": "Min 6 chars", "passwordMismatch": "Passwords do not match", "passwordTooShort": "Password must be at least 6 characters", "needName": "Enter a display name", "start": "Start", "stop": "Stop", "startAfterCreate": "Start after create", "hostnameBroken": "This host cannot resolve its own hostname ({{hostname}}). Session start will fail.", "hostnameBrokenIdle": "No VNC sessions yet. Hostname {{hostname}} does not resolve — you can write /etc/hosts later if you create a session.", "hostnameFix": "Write hostname to /etc/hosts", "hostnameFixTitle": "Append this line to /etc/hosts?", "hostnameFixDesc": "{{line}}", "hostnameFixDone": "Hostname /etc/hosts updated", "startAfterCreateBlocked": "Disabled until the hostname resolves", "startHostnameBlocked": "Cannot start until this host can resolve its hostname. Use “Write hostname to /etc/hosts”.", "colName": "Name", "colLinuxUser": "Linux user", "colDisplay": "Display / port", "colStatus": "Status", "colDesktop": "Desktop", "colBind": "RFB bind", "accountStatus": { "running": "Running", "stopped": "Stopped", "failed": "Failed", "written": "Written", "unknown": "Unknown" }, "clientStatus": { "up": "Connected", "down": "Disconnected", "unknown": "Unknown", "error": "Error", "viewing": "Viewing in browser" }, "accountPager": "Account pages", "prevPage": "Previous", "nextPage": "Next", "pageOf": "Page {{page}} / {{total}} · {{count}}", "deleteAccountTitle": "Delete VNC account?", "deleteAccountDesc": "Remove control-plane account “{{name}}” (Linux user {{user}}). The VNC session for this display stops first.", "deleteAccountC1": "The VNC session for this account will be stopped first.", "deleteAccountC2": "The panel VNC account record will be removed.", "deleteAccountC3User": "The Linux user and home directory will also be removed. If the host refuses, the panel reports failure and the user stays.", "deleteAccountC3Keep": "The Linux user stays on the host; only the panel account is removed.", "removeLinuxUser": "Also remove Linux user and home directory", "deleteKeepUserWarn": "The Linux user will stay on the host as an orphan. You must clean it up later.", "bindRfbLine": "RFB {{bind}} :{{port}}", "bindNovncLine": "noVNC 127.0.0.1:{{port}}", "bindNovncHint": "noVNC listens on localhost. The desktop is reached through this panel, not the public internet, unless RFB bind is all interfaces.", "connection": "Connect", "connectionTitle": "Connection materials", "connectionDesc": "How clients reach {{name}}", "connectionPathsHint": "Prefer open in browser; advanced options for legacy noVNC / direct RFB", "connectionBrowserHint": "Recommended: open the desktop inside this panel (no SSH tunnel, works from any browser that can reach the panel).", "connectionBrowserDesc": "Starts the VNC session if needed and opens the in-panel viewer with keyboard, mouse, and clipboard.", "connectionAdvanced": "Advanced: legacy noVNC URL & direct RFB", "pathViaServer": "Via server (noVNC)", "pathViaServerLegacy": "Legacy noVNC on server (127.0.0.1)", "pathViaServerLegacyHint": "Only works on the server host or via SSH tunnel — prefer “Open in browser”.", "pathDirect": "Direct RFB", "recommended": "Recommended", "startNovnc": "Start noVNC", "stopNovnc": "Stop noVNC", "copyNovncUrl": "Copy noVNC URL", "copyAddress": "Copy host:port", "openFirewall": "Open UFW port", "directAddress": "Address", "ticketPath": "View ticket API", "directLocalhostWarn": "RFB is localhost-only", "copied": "Copied to clipboard", "clientListTitle": "Client profiles ({{count}})", "clientListDesc": "Outbound VNC", "addClient": "+ Add remote", "addClientTitle": "Add remote VNC", "addClientDesc": "Remote host:port", "clientTarget": "Target", "clientPath": "Connect path", "clientHost": "Remote host", "pathViaServerShort": "Browser", "pathDirectShort": "Host viewer", "disconnect": "Disconnect", "connect": "Connect", "clientNeedFields": "Name and host are required", "clientCreated": "Client profile created", "clientPasswordOptional": "VNC password (optional)", "clientPasswordHint": "Used when you open the browser viewer. Leave empty to type it each time.", "clientRememberPassword": "Store password on this server for next open", "clientRememberPasswordWarn": "Password is stored in panel dataDir (readable by root). Prefer typing each time on shared hosts.", "stackMissingShort": "Not installed", "editClientTitle": "Edit remote client", "editClientDesc": "Update path, hosts, and optional stored password.", "clientUpdated": "Client profile updated", "rememberNeedPassword": "Enter a password first." }