{displayName}) and can only manipulate resources within there. Other accounts with
access to this Environment can also manage these keys.
currentEndpoint: 'Endpoint (v2-beta):'
legacyEndpoint: 'Endpoint (v1):'
table:
state: State
name: Name
description: Description
publicValue: Access Key
created: Created
noData: There are no keys for this Environment yet.
noName: None
noDescription: None
noPublicValue: No public value
account:
header: Account API Keys
buttonText: Add Account API Key
content:
paragraph1: Account API Keys are tied to your specific account
paragraph2: 'and can create, delete, and manipulate all Environments which you have access to.'
table:
noData: You don't have any Account API keys yet.
auditLogsPage:
header: Audit Logs
form:
eventType:
placeholder: Event Type
resourceType:
placeholder: 'Resource Type:'
dropdownPlaceholder: 'Select a Resource Type:'
dropdownList: null
resourceId:
placeholder: Resource ID
requestIp:
placeholder: Request IP
authType:
placeholder: 'Auth Type:'
dropdownPlaceholder: 'Select an Auth Type:'
dropdownList: null
clearButtonText: Clear Filters
searchButtonText: Search
table:
time: Time
eventType: Event Type
description: Description
environment: Environment
resourceTypeId: 'Resource Type:ID'
identity: Identity
authIp: Auth & IP
first: First Page
next: Next Page
authPage:
shibboleth:
header:
title: Shibboleth Authentication
enabled:
header: '{providerName} is enabled'
required: |
{appName} is configured to allow access to {orgs, plural,
=0 {no organizations}
=1 {# organization}
other {# organizations}
} and {users, plural,
=0 {no users}
=1 {# user}
other {# users}
}.
restricted: |
{appName} is configured to allow access to environment members, {orgs, plural,
=0 {no organizations}
=1 {# organization}
other {# organizations}
} and {users, plural,
=0 {no users}
=1 {# user}
other {# users}
}.
unrestricted: '{appName} is configured to allow access to any {providerName} user.'
authenticated:
header:
text: Authentication
helpText: 'To change the configured Shibboleth application, disable access control below and then set it up again.'
disableAccess:
header: Danger Zone™
warning: 'Caution: Disabling access control will give complete control over {appName} to anyone that can reach this page or the API.'
confirmDisable: Are you sure? Click again to really disable access control
disable: Disable access control
groupsField: 'Groups:'
displayName: 'Display Name:'
userName: 'Username:'
userId: 'User ID:'
disabled:
header: 1. Configure Shibboleth Account
label: '{providerName} is not configured'
warning: >-
{appName} can be configured to restrict access to a set of {providerName} users and groups. This is not currently set up, so anybody that reach this
page (or the API) has full control over the system.
name:
labelText: Display Name Field
username:
labelText: User Name Field
uid:
labelText: UID Field
groups:
labelText: Groups Field
testAuth:
header: 2. Test and enable authentication
subtext: 'Check that your application is configured correctly by testing authentication with it:'
buttonText:
pre: Authenticate with IDP
post: Waiting to hear back from IDP
providerName:
shibboleth: Shibboleth
root:
header: Access Control
github:
standard: GitHub
enterprise: GitHub Enterprise
header:
enabled:
label: '{github} is enabled'
required: |
{appName} is configured to allow access to {orgs, plural,
=0 {no organizations}
=1 {# organization}
other {# organizations}
} and {users, plural,
=0 {no users}
=1 {# user}
other {# users}
}.
restricted: |
{appName} is configured to allow access to environment members, {orgs, plural,
=0 {no organizations}
=1 {# organization}
other {# organizations}
} and {users, plural,
=0 {no users}
=1 {# user}
other {# users}
}.
unrestricted: '{appName} is configured to allow access to any {github} user.'
disabled:
label: GitHub is not configured
warning: >-
{appName} can be configured to restrict access to a set of GitHub users and organization members. This is not currently set up, so anybody that reach
this page (or the API) has full control over the system.
authenticated:
header:
text: Authentication
enterpriseHostName: 'Enterprise Host:'
clientId:
text: 'Client ID:'
helpText: 'To change the configured GitHub application, disable access control below and then set it up again.'
disableAccess:
header: Danger Zone™
warning: 'Caution: Disabling access control will give complete control over {appName} to anyone that can reach this page or the API.'
confirmDisable: Are you sure? Click again to really disable access control
disable: Disable access control
notAuthenticated:
header: 1. Setup a GitHub Application
ul:
li1:
text: 'For standard GitHub, click here to go applications settings in a new window.'
ul:
li1: 'For Github Enterprise, login to your account. Click on Settings, then Applications.'
li2:
text: 'Click "Register new application" and fill out the form:'
ul:
li1: 'Application name: Anything you like, e.g. My {appName}'
li2: 'Homepage URL: '
li3: 'Application description: Anything you like, optional'
li4: Authorization callback URL
li3:
text: 'Click "Register Application" '
form:
header: '2. Configure {appName} to use your application for authentication'
subtext: Copy and paste the Client ID and Secret from the upper-right corner of your newly-created application.
clientId:
labelText: Client ID
clientSecret:
labelText: Client Secret
ghEnterprise:
labelText: Use a private GitHub Enterprise installation
isGHEnterprise:
labelText: Use a secure connection
enterpriseHost:
labelText: Enterprise Host
placeholder: e.g. github.example.com
testAuth:
header: 3. Test and enable authentication
subtext: 'Check that your application is configured correctly by testing authentication with it:'
buttonText:
pre: Authenticate with GitHub
post: Waiting to hear back from GitHub
azuread:
header:
enabled: Azure AD Authentication is enabled
disabled: Azure AD Authentication is not configured
subtext:
enabled: '{appName} is configured to allow access to accounts in Azure AD'
disabled: >-
{appName} can be configured to restrict access to a set of accounts defined in the {appName} database. This is not currently set up, so anybody that
reach this page (or the API) has full control over the system.
enabled:
header: Danger Zone™
warning: 'Caution: Disabling access control will give complete control over {appName} to anyone that can reach this page or the API.'
reallyDisable: Are you sure? Click again to really disable access control
promptDisable: Disable access control
configure:
header: 1. Configure Azure AD Account
tenantId:
label: Tenant ID
placeholder: A long UUID string
help: From the Azure AD portal
clientId:
label: Client ID
placeholder: A long UUID string
domain:
label: Domain
placeholder: e.g. youcompany.onmicrosoft.com
adminAccountUsername:
label: Admin Account Username
placeholder: e.g. rancher-admin
help: A user that can read information about other users
adminAccountPassword:
label: Admin Account Password
test:
header: 2. Test and enable authentication
help: 'Check that everything is configured correctly by testing authentication with your account:'
username:
label: Login Username
placeholder: e.g. jsmith
password:
label: Login Password
pre: Authenticate with Azure
post: Waiting to hear back from Azure
localAuth:
header:
enabled: Local Authentication is enabled
disabled: Local Authentication is not configured
subtext:
enabled:
text: '{appName} is configured to allow access to accounts in its local database.'
linkText: Manage Accounts
disabled: >-
{appName} can be configured to restrict access to a set of accounts defined in the {appName} database. This is not currently set up, so anybody that
reach this page (or the API) has full control over the system.
accessEnabled:
header: Danger Zone™
warning: 'Caution: Disabling access control will give complete control over {appName} to anyone that can reach this page or the API.'
buttonText:
disable: Are you sure? Click again to really disable access control
prompt: Disable access control
accessDisabled:
header: 1. Setup an Admin user
helpText: 'This user will become the admin that has full control over {appName}.'
form:
login:
labelText: Login Username
placeholder: e.g. jsmith
name:
labelText: Full Name
placeholder: e.g. John Smith
password:
labelText: Password
confirmPassword:
labelText: Confirm Password
accessControl:
header: 2. Enable Access Control
helpText: Click to enable access control and log in.
buttonText:
pre: Enable Local Auth
post: Enabling...
backupTargetsPage:
header: Backup Targets
linkTo: Add Backup Target
newTarget:
hr: NFS Config Options
header: Add Backup Target
server:
label: NFS Server
placeholder: e.g. my-nfs-server.example.com
share:
label: NFS Share
placeholder: e.g. /mnt/volume-backups
mountOptions:
label: NFS Mount Options
placeholder: 'e.g. nfsvers=4,proto=udp'
catalogPage:
index:
header: 'Catalog:'
search:
placeholder: Search...
category: 'Category:'
certified:
rancher:
rancher: Certified
partner: Partner
pl:
rancher: Certified
partner: Partner
noData:
singular: There are no compatible templates.
plural: There are no compatible templates in this catalog.
action:
launch: View Details
notCompatible: Not Compatible
alreadyDeployed: Already Deployed
consolePage:
header: 'Shell:'
closeButton: Close
certificatesPage:
table:
cn: Domain Name
expiresDate: Expires
noCn: None
detail:
header: 'Certificate:'
description: Description
info:
labelText: Info
valid: Valid Beginning
expires: Expires
algorithm: Algorithm
issuer: Issuer
serialNumber: Serial Number
version: Version
domainNames:
labelText: Domain Names
index:
header: Certificates
linkTo: Add Certificate
table:
header:
state: State
name: Name
domain: Domain Name
expires: Expires
body:
noData: You do not have any certificates yet.
new:
header: Add Certificate
form:
name:
placeholder: e.g. mydomain.com
description:
placeholder: e.g. EV cert for mydomain.com
containersPage:
table:
ipAddress: IP Address
primaryHost: Primary Host
primaryHostUnknown: Unknown
image: Image
stats: Stats
sparkPrefixCpu: 'CPU: '
sparkPrefixMemory: 'Memory: '
sparkPrefixNetwork: 'Network: '
sparkPrefixStorage: 'Storage: '
command: Command
noCommand: None
index:
header: Containers
linkTo: Add Container
table:
header:
state: State
name: Name
ip: IP Address
host: Host
image: Image
command: Command
body:
noData: You do not have any containers yet.
new:
form:
name:
placeholder: e.g. myapp
description:
placeholder: e.g. My Application
containerPage:
header: 'Container:'
subtext:
'on': 'on'
in: in
infoMultiStats:
tooltip:
host: Copy IP To Clipboard
host: 'Host:'
ip: 'Container IP:'
docker: 'Docker ID:'
image: 'Image:'
command: 'Command:'
entryPoint: 'Entry Point:'
description: 'Description:'
stack: 'Stack/Service:'
memoryReservation:
labelText: 'Memory Reservation: '
milliCpuReservation:
labelText: 'mCPU Reservation: '
navTabs:
labels: Labels
volumes: Volumes
ports: Ports
command: Command
networking: Networking
healthCheck: Health Check
scheduling: Scheduling
security: Security
portsTab:
table:
header:
ip: IP Address
public: Public on Host
private: Private in Container
protocol: Protocol
body:
noData: This container has no ports.
volumesTab:
table:
header:
name: Name
mount: Mount Point
shared: Shared With
writable: Writable
snapshot: Snapshot Timeline
body:
error:
data: 'Note:'
error: Error
noData: This container has no volumes.
noContainers: No other containers
containerSubpod:
childContainers: Containers
childSidekicks: Sidekicks
dockerCLI:
header: Swarm CLI
failWhalePage:
header: Error
reloadButton: |
Reload to try again or
logoutButton: log out
haPage:
header: High Availability
setup:
prefix: 'Multiple server containers can be deployed on different hosts so that {appName} keeps running even if one of the hosts fail. '
link: See documentation
suffix: ' for information on setup and usage.'
table:
address: Advertised Address
port: Port
heartbeat: Last Seen
clustered: Clustered
helpPage:
header: Helpful links & Information
banner: Announcements
releaseText: 'Released:'
environment:
header: What is an environment?
content: >
{appName} supports grouping resources into multiple environments. Each one gets its own set of services and infrastructure resources, and is owned by one or more GitHub users, teams or organizations.
For example, you might create separate "dev", "test", and "production" environments to keep things isolated from each other, and give "dev" access to your entire organization but restrict the "production" environment to a smaller team.
manageLink: Manage Environments host: header: What is a host? content: > Before adding your first service or launching a container, you must add at least a single Linux host that supports Docker {minVersion} or higher and be able to reach the {appName} server via HTTP. {appName} supports adding Linux hosts in the form of a virtual or physical machine from any public cloud providers, privately hosted clouds, or even bare metal servers. contentLink: Learn More addHostLink: Add Host stacks: header: What are stacks and services? content: paragraph1: > A service is simply a group of containers created from the same Docker image but extends Docker's "link" concept to leverage {appName}'s lightweight distributed DNS service for service discovery. Services can be added individually or by deploying an item from the Catalog. paragraph2: >- A service is also capable of leveraging other {appName} built-in services such as load balancers, health monitoring, upgrade support, and high availability. link: Learn More addServiceLink: Manage Services addCatalogLink: Add From Catalog noHosts: You currently have no hosts. Please add a host before adding Services. manageServiceLink: Manage Services issues: header: text: Issues & Documentation tagline: 'Uh oh, Find an issue?' fileBug: File a Bug content: paragraph1: > {appName} is an open source software platform that implements a purpose-built infrastructure for running containers in production. Docker containers, as an increasingly popular application workload, create new requirements in infrastructure services such as networking, storage, load balancer, security, service discovery, and resource management. graphic1: text: Find a bug? link: File an issue on GitHub. graphic2: text: For more information link: | about using {appName} Visit our docs.~/.kube/config:
downloadText: |
Then download (if needed) and run kubectl
shell:
helpText: |
Or use this handy shell to directly execute kubectl commands:
loginPage:
greeting: 'Howdy!docker-machine drivers can be loaded here and used in the Add Host screen.
add: Add Machine Driver
builtin: Built-In
other: Other
table:
header:
state: State
name: Name
url: Driver URL
uiUrl: UI URL
checksum: Checksum
noData: You have no Machine Drivers
mesosPage:
header: Overview
actionLink: Open Mesos UI
banner:
header: Your cluster
content: |
You currently have {hosts, plural,
=1 {# active host}
other {# active hosts}
} in your Mesos cluster
link: View or add hosts
launch:
header: Launch
content: You can launch frameworks from our catalog.
button: Launch a Framework
manage:
header: Manage
content: Manage Mesos from the Mesos UI.
button: Mesos UI
notFoundPage:
header: The page you were looking for doesn't exist!
linkTo: Go Home
projectList:
index:
header: Environments
new: Add Environment
subtext: >
{appName} supports grouping resources into multiple environments. Each one gets its own set of services and infrastructure resources, and is owned by one or more users or groups.
For example, you might create separate "dev", "test", and "production" environments to keep things isolated from each other, and give "dev" access to your entire organization but restrict the "production" environment to a smaller team.
alert: There are no active environments. You will need to create or activate one before you can do anything else. table: header: orchestration: Orchestration projectTemplate: Template body: noData: You don't have any environments yet. indexTemplate: header: Environment Templates new: Add Template subtext: >An environment template allows users to define a different combination of infrastructure services to be deployed.
The infrastructure services includes but not limited to container orchestration (i.e. cattle, kubernetes, mesos, swarm, networking) or rancher services (i.e healthcheck, dns, metadata, scheduling, service discovery and storage)
table: header: stacks: Stacks isPublic: Public body: noData: You don't have any environment templates yet. registriesPage: index: header: Registries linkTo: Add Registry table: header: state: State address: Address email: Email username: Username created: Created body: noData: You don't have any registries yet. new: header: Add Registry form: custom: labelText: Address placeholder: e.g. registry.example.com help: 'Just the hostname or IP address, do not include the protocol (https://)' email: labelText: Email placeholder: e.g. you@example.com username: labelText: Username placeholder: e.g. username password: labelText: Password placeholder: e.g. password servicePage: header: 'Service:' multistat: type: 'Type:' fqdn: 'FQDN:' scale: 'Scale:' image: 'Image:' entryPoint: 'Entrypoint:' command: 'Command:' description: 'Description:' global: Global external: externalIp: External IPs externalHostname: 'External Hostname:' navTabs: portRules: Balancer Rules certificates: Certificates ports: Ports containers: Containers labels: Labels links: Links log: Log containersTab: table: header: ipAddress: IP Address host: Host image: Image stats: Stats body: noData: This service does not have any containers yet. linksTab: header: Links noData: No Links certsTab: default: Default Certificate additional: Additional SNI Certificates new: form: name: placeholder: e.g. myapp description: placeholder: e.g. My application newAlias: form: name: placeholder: e.g. myapp description: placeholder: e.g. Current version of MyApp newBalancer: upgradeImage: 'The balancer software image will be upgraded from{from} to {to}.'
form:
name:
placeholder: e.g. website
description:
placeholder: e.g. Balancer for mycompany.com
portsTab:
table:
header:
port: Port
host: Host IP
body:
noData: This Service has no ports.
notActive: Ports are only available while the service is Active.
logTab:
table:
header:
date: Date
level: Level
event: Event
description: Description
body:
noData: There have been no log events yet.
type:
service: Service
loadbalancerservice: Load Balancer
dnsservice: Service Alias
externalservice: External
kubernetesservice: K8s Service
composeservice: Compose Service
networkdriverservice: Network Service
storagedriverservice: Storage Service
settingsPage:
header: Settings
stacksPage:
header:
all: All Stacks
user: User Stacks
custom: '{name} Stacks'
tags: '"{tags}" Stacks'
infra: Infrastructure Stacks
actionButton: Add Stack
catalogButton: Add from Catalog
sort:
label: Sort By
state: State
name: Name
tags:
all: All Tags
one: 'Tag: {name}'
noInfra: You do not currently have any Infrastructure Stacks
noMatch: No Stacks match the selected tag
new:
header: Add Stack
composeLabel: 'Optional: Import Compose'
form:
name:
placeholder: e.g. myapp
description:
placeholder: e.g. MyApp Stack
dockerCompose:
label: 'Optional: docker-compose.yml'
placeholder: Contents of docker-compose.yml
rancherCompose:
label: 'Optional: rancher-compose.yml'
placeholder: Contents of rancher-compose.yml
startOnCreate:
label: Start services after creating
storagePoolsPage:
header: Storage Drivers
volume: Volume ID
orphaned: Orphaned Backup
nav:
pools: Pools
backups: Backups
index:
noData: No storage drivers
newVolume:
header: Add Volume
form:
driverOptions: Driver Options
addActionLabel: Add Option
swarmPage:
projects:
index:
header: Projects
linkTo: Add Project
table:
header:
services: Services
body:
noData: You do not have any Projects yet.
new:
header: Add Project
form:
name:
placeholder: e.g. myapp
description:
placeholder: e.g. MyApp Project
variables:
addActionLabel: Add Variable Substitution
keyLabel: Variable
keyPlaceholder: e.g. FOO
valuePlaceholder: e.g. bar
dockerCompose:
labelText: docker-compose.yml
placeholder: Paste in the contents of docker-compose.yml
project:
linkTo: 'Project:'
table:
header:
ports: Ports
containers: Containers
body:
noData: This Project does not have any Services yet.
services:
header: Services
table:
header:
ports: Ports
containers: Containers
body:
noData: You do not have any Services yet.
processesPage:
header: Processes
tab:
summary: Summary
pools: Pools
running: Running
delayed: Delayed
ready: Ready
completed: Recently Completed
summary:
noData: No processes are currently running
pools:
noData: No pools found
list:
noData: No processes found
virtualMachinePage:
header: 'Virtual Machine:'
multistat:
host: 'Host:'
hostIp: 'Host IP:'
vmIp: 'VM IP:'
image: 'Image:'
description: 'Description:'
navTabs:
labels: Labels
virtualMachinesPage:
header: Virtual Machines
linkTo: Add Virtual Machine
table:
body:
noData: You do not have any virtual machines yet.
waitingPage:
hosts:
header: |
{expectHosts, plural,
=1 {Adding your first host}
other {Add hosts}
}
content: >
You must add at least {expectHosts, plural,
=1 {a single Linux host that supports}
other {# Linux hosts that support}
} Docker {minVersion} or higher and be able to reach the {appName} server via HTTP.389 is the standard port for insecure, 636 for
TLS.
subtext2: >-
{appName} needs a service account that has (read-only) access to all of the domains that will be able to login, so that we can determine what groups a
user is a member of when they make a request with an API key.
hostName:
labelText: Hostname or IP Address
port:
labelText: Port
checkbox: TLS
serviceUsername:
labelText: Service Account Username
servicePassword:
labelText: Service Account Password
searchBase:
helpText: Only users and groups below the base will be used.
labelText: Search Base
placeholder: 'e.g. dc=mycompany,dc=com'
defaultDomain:
helpText: This domain will be used if a user logs in without specifing one.
labelText: Default Login Domain
placeholder: e.g. mycompany
customizeSchema:
header: 2. Customize Schema
helpText: 'If your schema does not match the standard ActiveDirectory format, you can customize it here.'
users:
header: Users
objectClass:
labelText: Object Class
login:
labelText: Login Field
name:
labelText: Name Field
search:
labelText: Search Field
status:
labelText: Status Field
disabledBitMask:
labelText: Disabled Status Bitmask
groups:
header: Groups
objectClass:
labelText: Object Class
name:
labelText: Name Field
search:
labelText: Search Field
groupMemberUser:
labelText: Group Member User Attribute
placeholder: uid
groupDN:
labelText: Group DN Field
placeholder: distinguishedName
testAuth:
header: 3. Test and enable authentication
helpText: 'Check that everything is configured correctly by testing authentication with your {providerName} account:'
userName:
labelText: Your Username
password:
labelText: Your Password
authenticate:
pre: Authenticate
post: Testing...
servicePartial:
noContainers:
label: No containers yet.
inactive:
start: Start
serviceInfoPartial:
info:
label: Info
linkTo: View Details
image: 'Image:'
entryPoint: 'Entrypoint:'
command: 'Command:'
description: 'Description:'
containers: Containers
scale: Scale
global: Global
noContainers: No Containers
ports: Ports
noPublicPorts: No Public Ports
links: Links
noLinks: No Links
fqdn: 'FQDN:'
advancedSection:
hrText: Advanced Options
catalogSettings:
header: Catalog
subtext: Catalogs contain templates that allow users to easily deploy applications by answering a few questions
certified:
header:
rancher: '{appName} Certified Library'
pl: Certified Library
detail:
rancher: Templates required for core Rancher features such as Kubernetes/Mesos/Swarm orchestration support. Maintained and supported by Rancher Labs.
pl: Officially maintained templates required for core features such as Kubernetes/Mesos/Swarm support.
community:
header:
rancher: Community Contributed
pl: Community Contributed
detail:
rancher: Templates created and maintained by community members. Not certified by Rancher Labs.
pl: Templates created and maintained by community members.
more:
header: Custom
helpText: >-
You can define your own custom catalog sources here. Each one needs a unique name and a URL that git clone can handle (see docs for more info).
addActionLabel: Add Catalog
name:
label: Name
placeholder: e.g. mycatalog
url:
label: URL
placeholder: 'e.g. https://github.com/mycompany/mycatalog.git'
branch:
label: Branch
placeholder: e.g. master
confirmDelete:
title: Are you sure you want to delete
environmentNote: 'Note: All resources inside this Environment will be permanently removed, including any Hosts that were created through {appName}.'
protip: 'ProTip: Hold the {key} key while clicking Delete to bypass this confirmation.'
confirmAction: Delete
cancelAction: Cancel
largeDeleteText: '{key} and {othersCount} others'
containerLogs:
title: 'Logs: {instanceName}'
onlyCombined: 'Note: Only combined stdout/stderr logs are available for this container because it was run with the TTY (-t) flag.'
combined: Combined
stdout: Standard Out
stderr: Standard Error
protip: 'ProTip: Hold the {key} key when opening logs to launch a new window.'
scrollTop: Scroll to Top
scrollBottom: Scroll to Bottom
clear: Clear Screen
status:
initializing: Initializing...
connecting: Connecting...
connected: Connected
disconnected: Disconnected
closed: Closed
containerShell:
protip: 'ProTip: Hold the {key} key when opening shell access to launch a new window.'
status:
initializing: Initializing...
error: 'Error: {error}'
connecting: Connecting...
connected: Connected
disconnected: Disconnected
closed: Closed
copyToClipboard:
tooltip: Copy to Clipboard
copied: Copied!
dangerZone:
header: Advanced Settings
subtext: >-
Proceed with caution; typical users will not need to change these. Incorrect values can break your {appName} installation. Settings which have been
changed are shown in bold.
showLabel: I understand that I can break things by changing advanced settings.
devicePermissions:
all: All
none: None
read: Read
write: Write
mknod: Mknod
editAccount:
title: Edit Account
form:
name:
label: Name
placeholder: e.g. John Smith
kind:
label: Account Type
user: User
admin: Admin
description:
label: Description
placeholder: e.g. This account is for John Smith
publicValue:
label: Login Username
oldPassword:
label: Current Password
newPassword:
label: New Password
confirmPassword:
label: Confirm Password
identity:
label: Identity
editAliasService:
title: Edit Service Alias
editApiKey:
title:
justCreated: API Key Created
editing: Edit API Key
new: New API Key
publicValue:
label: Access Key (Username)
secretValue:
label: Secret Key (Password)
name:
placeholder: e.g. App servers
description:
placeholder: e.g. This key is used by the app servers to deploy containers
saveWarning1: Save the keys above! This is the only time you'll be able to see the secret.
saveWarning2: 'If you lose it, you''ll need to create a new API key.'
noteOptional: Name and/or description are optional to help you remember what it's used for. You can just create a key by clicking Create.
editBalancerService:
title: Edit Load Balancer
haproxy:
label: haproxy.cfg
help: |
Additional haproxy.cfg
configuration can be put here and will be appended to the configuration generated by {appName}.
global:
label: global section
prompt: Custom global section lines
defaults:
label: defaults section
prompt: Custom defaults section lines
editCertificate:
title: Edit Certificate
name:
placeholder: e.g. mydomain.com
description:
placeholder: e.g. EV cert for mydomain.com
noteKeyWriteOnly: >-
Note: The Private Key is intentionally blank because the field is write-only. You will need to provide the Private Key again to update the certificate,
even if it hasn't changed.
editContainer:
title:
vm: Edit VM
container: Edit Container
name:
placeholder: e.g. myapp
description:
placeholder: e.g. My Application
editExternalService:
title: Edit External Service
name:
placeholder: e.g. external-db
description:
placeholder: e.g. External physical database server
editHost:
title: Edit Host
hostname:
label: Hostname
help: As reported by the host operating system.
customName:
label: Custom Name
placeholder: e.g. dev1
help: 'If this is left empty, the Hostname will be shown as the Name.'
description:
label: Description
placeholder: e.g. My development host
labels:
label: Labels
ips:
label: Scheduler IPs
valueLabel: IP Address
valuePlaceholder: e.g. 1.2.3.4
addActionLabel: Add IP
help: 'If provided, the scheduler will select and bind published ports to one of the given public IP addresses.'
editProjectTemplate:
title:
add: Add Template
edit: 'Edit Template: {displayName}'
orchestration: Orchestration
stackEdit: Edit Config
stackRequired: Required
access:
label: Sharing
private: 'Private: Only available to me'
public: 'Public: Available to all users (admin only)'
error:
conflict: Conflict
enabling: 'The selected version of {tplCategory} stack "{stackName}" does not support {orchestration} Orchestration.'
changing: 'The currently enabled {tplCategory} stack "{stackName}" does not support {orchestration} Orchestration.'
editRegistry:
title: Edit Registry
address:
label: Address
email:
label: Email
placeholder: e.g. you@example.com
username:
label: Username
placeholder: e.g. username
password:
label: Password
placeholder: e.g. password
editService:
title: Edit Service
editStack:
title: Edit Stack
name:
label: Name
placeholder: e.g. myapp
description:
label: Description
placeholder: e.g. MyApp Stack
group:
label: Tags
placeholder: 'e.g. frontend, production'
help: Comma-separated list of tags. The Stacks list can be filtered by individual tags.
stackHeader:
backLink: 'Stack:'
outputs: Outputs
add:
service: Add Service
balancer: Add Load Balancer
external: Add External Service
alias: Add Service Alias
vm: Add Virtual Machine
formatIp:
noIp: None
unknownIp: Unknown
formBalancerRules:
label: Port Rules
noRules: No Rules
addServiceLabel: Add Service Rule
addSelectorLabel: Add Selector Rule
target: Target
access:
label: Access
public: Public
internal: Internal
protocol:
label: Protocol
sourceIp:
label: Host IP
placeholder: e.g. 1.2.3.4
sourcePort:
label: Port
placeholder: e.g. 80
path:
label: Path
placeholder: e.g. /foo
hostname:
label: Request Host
placeholder: e.g. example.com
backendName:
label: Backend
placeholder: e.g. webapp
targetPort:
label: Port
placeholder: e.g. 80
priority:
label: Priority
moveUp: Move Up
moveDown: Move Down
serviceId:
label: Service
selector:
label: Selector
placeholder: e.g. foo=bar
help:
prefix: >-
Host and Path rules are matched top-to-bottom in the order shown. Backends will be named randomly by default; to customize the generated backends,
provide a name and then refer to that in the custom haproxy.cfg.
showBackendLink: Show custom backend names.
showIpLink: Show host IP address options.
suffix: ''
formCommand:
command:
label: Command
placeholder: e.g. /usr/sbin/httpd -f httpd.conf
entryPoint:
label: Entry Point
placeholder: e.g. /bin/sh -c
workingDir:
label: Working Dir
placeholder: e.g. /myapp
user:
label: User
placeholder: e.g. apache
console:
label: Console
both: Interactive & TTY (-i -t)
interactive: Interactive (-i)
terminal: TTY (-t)
none: None
autoRestart:
label: Auto Restart
startOnceFalse: Always
startOnceTrue: Never (Start Once)
'no': Never
onFailure: 'On failure (non-0 exit code), forever'
onFailureCondPrefix: 'On failure, up to'
onFailureCondSuffix: |
{limit, plural,
=1 {time}
other {times}
}
always: Always
environment:
label: Environment
addAction: Add Environment Variable
keyLabel: Variable
keyPlaceholder: e.g. FOO
valueLabel: Value
valuePlaceholder: e.g. bar
formContainerLinks:
label: Links
addActionLabel: Add Link
noContainers: There are no other containers to link to.
noLinks: This container has no links.
targetInstance:
label: Destination Container
prompt: Select a Container...
name:
label: As Name
placeholder: e.g. database
formDisks:
addDiskLabel: Add Disk
addRootDiskLabel: Add Root Disk
name:
rootDisk: Root Disk
label: Name
placeholder: e.g. data
size:
label: Size
rootDisk: Determined by root image
readIops:
label: Read Iops
placeholder: e.g. 1000
writeIops:
label: Write Iops
placeholder: e.g. 1000
driver:
label: Driver
formEngineOpts:
engineInstallUrl:
label: Docker Install URL
placeholder: 'e.g. http://get.docker.com/'
recommended: Recommended
latest: Latest
engineStorageDriver:
label: Storage Driver
placeholder: e.g. overlay
engineOpts:
label: Engine Options
addActionLabel: Add Engine Option
keyPlaceholder: e.g. log-driver
valuePlaceholder: e.g. syslog
engineLabels:
label: Engine Labels
addActionLabel: Add Engine Label
keyLabel: Label
engineEnv:
label: Engine Environment
addActionLabel: Add Environment Variable
keyLabel: Variable
keyPlaceholder: e.g. HTTP_PROXY
valuePlaceholder: 'e.g. http://your-proxy:8080'
engineInsecureRegistry:
label: Insecure Registries
addActionLabel: Add Insecure Registry
valueLabel: Registry Domain
valuePlaceholder: e.g. registry.example.com
engineRegistryMirror:
label: Registry Mirrors
addActionLabel: Add Registry Mirror
valueLabel: Mirror URL
valuePlaceholder: 'e.g. https://my-mirror.example.com:5000'
formHealthCheck:
label: Type
checkType:
none: None
tcp: TCP Connection Opens
http: HTTP Responds 2xx/3xx
request:
label: HTTP Request
method:
prompt: 'Select a HTTP Method:'
path:
placeholder: Request Path e.g. /healthcheck
version:
prompt: 'Select a HTTP Version:'
host:
label: Host Header
placeholder: e.g. www.example.com
port:
label: Port
placeholder: e.g. 80
initializingTimeout:
label: Initializing Timeout
unit: ms
reinitializingTimeout:
label: Reinitializing Timeout
unit: ms
interval:
label: Check Interval
unit: ms
timeout:
label: Check Timeout
unit: ms
healthyThreshold:
label: Healthy After
unit: successes
unhealthyThreshold:
label: Unhealthy After
unit: failures
strategy:
label: When Unhealthy
none: Take no action
recreate: Re-create
recreateOnQuorumPrefix: 'Re-create, only when at least'
recreateOnQuorumSuffix: |
{quorum, plural,
=1 {container is}
other {containers are}
} healthy
formKeyValue:
addAction: Add Pair
key:
label: Key
placeholder: Key
separator: =
value:
label: Value
placeholder: Value
protip: 'ProTip: Paste one or more lines of key=value pairs into any key field for easy bulk entry.'
formImage:
label: Select Image
vm:
placeholder: e.g. rancher/vm-ubuntu
dropdownLabel: '{appName} Images'
container:
placeholder: 'e.g. ubuntu:trusty'
pullImage:
label: Always pull image before creating
formNameDescription:
name:
label: Name
placeholder: Name
description:
label: Description
placeholder: Description
formNetwork:
links:
table:
dest: Destination Container
as: As Name
data:
dest: 'Destination Container:'
as: 'As Name:'
networkMode:
label: Network
bridge: Bridge
container: container
host: Host
managed: Managed
nat: NAT
transparent: Transparent
none: None
container:
label: container
requestedIp:
label: Requested IP
placeholder: e.g. 10.42.2.24
help: Request a specific IP in the 10.42.0.0/16 block. If the IP is already in use a random one will be assigned.
retainIp:
label: Retain IP
reuse: Reuse IP addresses when upgrading or replacing unhealthy instances.
dns:
label: DNS
enable: 'Enable {appName} DNS service discovery'
hostname:
label: Hostname
placeholder: e.g. web
dockerId: Use the Docker container ID
containerName: Use the container name
custom: Set a specific hostname
domainName:
label: Domain Name
placeholder: e.g. example.com
resolvingServers:
label: Resolving Servers
addActionLabel: Add Server
placeholder: e.g. 8.8.4.4
searchDomains:
label: Search Domains
placeholder: e.g. prod.example.com
addActionLabel: Add Domain
formPorts:
addAction: Port Map
bindAddress:
label: Public Host IP (Optional)
placeholder: 'e.g. 1.2.3.4; Default: any'
public:
label: Public Host Port
placeholder: e.g. 80
private:
label: Private Container Port
placeholder: e.g. 8080
protocol:
label: Protocol
noPorts: This container has no port maps.
error:
privateRequired: Private Container Port is required for each port rule.
publicRequired: Public Host Port is required if Host IP is specified.
mixedIpPort: 'Port {ip}:{port}/{proto} has more than one mapping.'
mixedPort: 'Port {port}/{proto} has more than one mapping.'
showIpLink: Show Host IP field
formScale:
label: Scale
global:
vm: Always run one instance of this virtual machine on every host
container: Always run one instance of this container on every host
regular:
vm: |
Run {scale, plural,
=0 {no virtual machines}
=1 {1 virtual machine}
other {# virtual machines}
}
container: |
Run {scale, plural,
=0 {no containers}
=1 {1 container}
other {# containers}
}
formScheduling:
canRequestHost:
vm: Run all virtual machines on a specific host
containers: Run all containers on a specific host
runSpecific: Run on a specific host
noRules: No scheduling rules
autoRun: 'Automatically run on every host matching scheduling rules:'
autoPick:
vm: 'Automatically pick hosts for each virtual machine matching scheduling rules:'
container: 'Automatically pick hosts for each container matching scheduling rules:'
host: 'Automatically pick a host matching scheduling rules:'
addRule: Add Scheduling Rule
condition: Condition
field: Field
key: Key
value: Value
formSecurity:
key: Key
value: Value
logConfig:
addActionLabel: Add Option
keyPlaceholder: e.g. syslog-facility
valuePlaceholder: e.g. daemon
privileged:
label: Privileged
checkbox: Full access to the host
pidMode:
label: PID Mode
checkbox: Host
memoryLimit:
label: Memory Limit
placeholder: Unlimited
mb: MB
swapLimit:
label: + Swap Limit
mb: MB
placeholder1: Requires Memory Limit
placeholder2: Unlimited
cpuPinning:
label: CPU Pinning
placeholder: 'e.g. 0,3; Default: All'
shares:
label: Shares
placeholder: e.g. 1024
capabilities:
add: Add
drop: Drop
label: Capabilities
helpBlock:
text: Capabilities allow you to provide fine-grained control over superuser privileges available to the container.
link: More information
deviceBinding:
label: Device Binding
addActionLabel: Add Binding
pathHost:
label: Path in Host
placeholder: e.g. /dev/sdc
pathContainer:
label: Path in Container
placeholder: e.g. /dev/xsdc
permissions:
label: Permissions
placeholder: 'e.g. 0,3; Default: All'
logDriver:
label: Log Driver
placeholder: e.g. syslog
logOptions:
label: Log Options
memoryReservation:
label: Memory Reservation
milliCpuReservation:
label: mCPU Reservation
isolation:
label: Isolation
default: Default (Container)
hyperv: HyperV (VM)
formServiceLinks:
addAction: Service Links
noServices: There are no other services to link to.
noLinks: This service has no service links.
service:
label: Destination Service
name:
label: As Name
placeholder: e.g. database
formSslTermination:
defaultCertificate:
prompt: Choose a Certificate...
alternateCertificate:
prompt: Choose a Certificate...
certificate: Certificate*
alternateCerts: Alternate Certs
addAlternate: Add Alternate Certificate
noCertificates: There are no certificates to use.
noAlternateCertificates: There are no other certificates to use.
helpBlock: >
"Note: Some older SSL/TLS clients do not support Server Name Indication
(SNI); these clients will always be offered the main Certificate Modern clients will be offered an appropriate certificate from the Alternate
Certificates list if a match is found."
notNeeded: There are no SSL/TLS ports configured.
formStickiness:
stickiness: Stickiness
none: None
newCookie: Create new cookie
cookieName: Cookie Name
mode: Mode
domain: Domain
options: Options
indirect: Indirect
sendHeader: Send no-cache header
onPost: Only set cookie on POST
noPorts: There are no HTTP Port Rules configured.
placeholder:
sticky: e.g. sticky
domain: e.g. mydomain.com
formTarget:
target: Target
pointAddress: Point to IP Address(es)
pointHostname: Point to a Hostname
addTarget: Add Target IP
formTargets:
title: Targets
addAction: Add Service
hostname:
label: Request Host Header
placeholder: e.g. svc.com
srcPort:
label: Source Port
placeholder: e.g. 80
value:
label: Target Service
path:
label: Request Path
placeholder: e.g. /svc
dstPort:
label: Target Port
placeholder: e.g. 8080
advanced:
toggle: Show advanced routing options
detail: 'Direct requests to different services based on port, Host header, or request path'
help1: >
If Request Host and/or Path are specified, connections to HTTP listening ports will be routed to the appropriate target based on the request.
For example, you could use this to send traffic for domain1.com to a different service than domain2.com, or domain3.com/admin to a different service than
domain3.com.
help2: |
Matching requests will be sent to the Target Service on the Target Port.
If that is not set, then the Default Target port for the Source Port. If that is also not set, then the Source Port.
noHostnames: (Can't balance to hostnames)
formUserData:
placeholder: e.g. Configuration information for the container
isVmPlaceholder: e.g. Configuration information for the virtual machine
formUserLabels:
addAction: Add Label
key:
label: Key
placeholder: e.g. foo
separator: =
value:
label: Value
placeholder: e.g. bar
protip: 'ProTip: Paste one or more lines of key=value pairs into any key field for easy bulk entry.'
formUpgrade:
size: Batch Size
interval: Batch Interval
sec: sec
behavior: Start Behavior
startStop: Start before Stopping
whichServices: Which Services
formValueArray:
addActionLabel: Add Value
valueLabel: Value
valuePlacholder: Value
protip: 'ProTip: Paste one or more lines of values into any field for easy bulk entry.'
formVirtualMachines:
vcpus: vCPUs
memory: Memory
formVolumes:
value:
prompt: Select a Container...
volumes: Volumes
volumesFrom: Volumes From
volumeDriver:
label: Volume Driver
placeholder: e.g. rancher-nfs
noLaunchConfigs: There are no other launch configs in this service to share volumes with.
noHostContainers: This host has no containers to use the volumes from.
onlySingleHost: Only available when adding a container to a particular host.
addActionLabel: Add Volume
errors:
invalidName: 'Volume names can only contain letters, numbers, hyphen, underscore, and dot.'
heroAddService:
infra:
header: Add Infrastructure Stacks
paragraph: 'Infrastructure stacks add capabilities like new Orchestration engines, storage and networking providers to {appName}.'
service:
header: Adding your first Stack
paragraph1: >
A service is simply a group of containers created from the same Docker image but extends Docker's 'link' concept to leverage {appName}'s lightweight
distributed DNS service for service discovery.
Services can be added individually or by deploying an item from the Catalog.
paragraph2: >-
A service is also capable of leveraging other {appName} built-in services such as load balancers, health monitoring, upgrade support, and high
availability.
contentLink: Learn More
addService: Define a Service
addCatalog: Configure
linkToCatalog: Browse Catalog
hookPage:
scaleService:
label: Scale a Service
detailPrefix: 'Scale {action} '
detailLink: '{displayService}'
detailSuffix: 'by {amount}'
receiver:
header: Receiver Hooks
buttonText: Add Receiver
content: 'Receiver hooks give you a URL that can be hit to trigger an action inside of {appName}.'
noData: No receiver hooks.
fields:
kind:
label: Kind
detail:
label: Detail
url:
label: Trigger URL
hostSettings:
header: Host Registration URL
subtext: 'What base URL should hosts use to connect to the {appName} API?'
hostUrl:
local: 'This site''s address:'
new:
labelText: 'Something else:'
placeholder: 'e.g. http://example.com:8080'
helpText:
static1: 'Don''t include /v1 or any other path, but if you are doing'
static2: 'in front of {appName}, be sure to use https://.'
isRancher: 'SSL termination'
sslTerm: SSL termination
notPublic:
alert: |
Are you sure all the hosts you will create will be able to reach {activeValue} ?{groupName} group'
defaultCreate: 'Standard: Automatically create a {groupName} group'
custom: 'Custom: Choose an existing group'
updating: Updating Security Group...
creating: Creating Security Group...
portHelp:
link: Learn more
text: about the ports that will be opened.
needs:
label: 'For {appName} to work correctly your security group will need to allow traffic:'
item1: 'From the {appName} server to TCP port 22 (SSH to install and configure Docker)'
item2: From and To all other hosts on UDP ports 500 and 4500 (for IPsec networking)
item3: These rules will not be added automatically.
setInstanceAction: 'Next: Set Instance options'
instanceSection: Instance
instanceOptionsSection: Instance Options
instanceType:
label: Instance Type
rootSize:
label: Root Size
unit: GB
ami:
label: AMI
placeholder: An Ubuntu AMI
rancherList: RancherOS AMI List
sshUser:
label: SSH User
placeholder: e.g. ubuntu
iam:
label: IAM Profile
privateIp:
label: Private IP
onlyPrivate:
label: Use only private IP address
driverAzure:
helpBlock: 'You can find instructions on how to create a Client ID and Secret here.'
accountAccessSection: Account Access
placementSection: Placement
networkSection: Network
subscriptionId:
label: Subscription ID
placeholder: Your Azure subscription ID
subscriptionCert:
label: Subscription Cert
placeholder: Your Azure subscription certificate
instanceSection: Instance
image:
label: Image
placeholder: 'canonical:UbuntuServer:16.04.0-LTS:latest'
size:
label: Size
dockerPort:
label: Docker Port
placeholder: '2376'
publishSettingsFile:
label: Publish Settings
placeholder: Your Publish Settings file
environment:
label: Environment
placeholder: AzurePublicCloud
resourceGroup:
label: Resource Group
placeholder: docker-machine
sshUser:
label: SSH User
placeholder: usr1
storageType:
label: Storage Type
vnet:
label: VNet
placeholder: '[resourcegroup:]name'
subnet:
label: Subnet
placeholder: example-sub-name
subnetPrefix:
label: Subnet Prefix
placeholder: 128.42.0.0/21
availabilitySet:
label: Availability Set
placeholder: availability-set-name
openPort:
label: Open Port
placeholder: 'Comma-separated, e.g. 80,443'
privateIpAddress:
label: Private IP
placeholder: 127.0.0.1
usePrivateIp:
label: Use Private IP To Connect
staticPublicIp:
label: Public IP
noPublicIp:
label: No Public IP
clientId:
label: Client ID
placeholder: Your Client ID
clientSecret:
label: Client Secret
placeholder: Your Client Secret
regionSection: Region
region:
label: Region
driverCustom:
step1: >-
Start up a Linux machine somewhere and install the latest version of Docker
on it.
step2: 'Make sure any security groups or firewalls allow traffic:'
step2li: From and To all other hosts on UDP ports 500 and 4500 (for IPsec networking)
step3: 'Optional: Add labels to be applied to the host.'
step4: >-
Specify the public IP that should be registered for this host. If left empty, Rancher will auto-detect the IP to use. This generally works for machines
with unique public IPs, but will not work if the machine is behind a firewall/NAT or if it is the same machine that is running the
{rancherImage} container.
agentIp:
placeholder: e.g. 1.2.3.4
step5Copy: 'Copy, paste, and run the command below to register the host with'
generating: Generating registration URL...
step5Close:
part1: Click close below. The new host should pop up on the
link: Hosts
part2: screen within a minute.
close: Close
windows:
step1: >-
Start up a Windows Server 2016 machine somewhere and install the latest version of Docker on it.
step2: 'Create a transparent Docker Network:'
step2Copy: docker network create -d transparent transparent
step3: 'Copy, paste, and run the command below in PowerShell to start the {appName} agent.'
driverDigitalocean:
sizeLabel: |
{highMem, select, true {High Memory: } other {}}{memoryGb} GB RAM, {disk} GB Disk, {vcpus, plural,
=1 {# vCPU}
other {# vCPUs}
}
accountSection: Account Access
authAccountButton: 'Next: Configure Droplet'
accessToken:
label: Access Token*
placeholder: Your DigitalOcean API access token
help: |
A Personal Access Token from the DigitalOcean
Apps & API screen
instanceSection: Instance
image:
label: Image
sshUser:
label: SSH User
placeholder: usr1
size:
label: Size
regionSection: Region
region:
label: Region
optionsSection: Options
backups:
label: Enable Backups
ipv6:
label: Enable IPv6
privateNetworking:
label: Enable Private Networking
driverExoscale:
accountSection: Account Access
apiKey:
label: API Key
placeholder: Your Exoscale API Key
secretKey:
label: Secret Key
placeholder: Your Exoscale secret key
provided: Provided
accountHelp: Paste in your Exoscale key pair here. We'll use this key to create your new Instances.
loginAction: 'Next: Authenticate & select a Security Group'
loadingSecurity: Loading security group info from Exoscale...
securityGroupSection: Security Group
securityGroup:
label: Security Group
defaultExisting: 'Standard: Use the existing {groupName} group'
defaultCreate: 'Standard: Automatically create a {groupName} group'
custom: 'Custom: Choose an existing group'
updating: Updating Security Group...
creating: Creating Security Group...
portHelp:
link: Learn more
text: about the ports that will be opened.
needs:
label: 'For {appName} to work correctly your security group will need to allow traffic:'
item1: 'From the {appName} server to TCP port 22 (SSH to install and configure Docker)'
item2: From and To all other hosts on UDP ports 500 and 4500 (for IPsec networking)
item3: These rules will not be added automatically.
selectSecurityGroupAction: 'Next: Set Instance options'
loadingInstance: Fetching available Instance settings...
instanceSection: Instance
instanceProfile:
label: Instance Profile
diskSize:
label: Root Size
sshUser:
label: SSH User
placeholder: usr1
driverOther:
driverSection: Driver
driver:
label: Driver
optionsSection: '{driverName} Options'
driverPacket:
accountSection: Account Access
projectId:
label: Project
placeholder: Your Packet project ID
apiKey:
label: API Key
placeholder: Your Packet API key
apiKeyHelp: 'From the Packet API Keys screen'
instanceSection: Instance
image:
label: Image
size:
label: Size
regionSection: Region
region:
label: Region
driverRackspace:
accountSection: Account Access
username:
label: Username
placeholder: Your RackSpace username
apiKey:
label: API Key
placeholder: Your RackSpace API key
accountHelp: From the Account Settings screen of the RackSpace control panel
regionSection: Region
region:
label: Region
instanceSection: Instance
flavor:
label: Flavor
driverUbiquity:
accountSection: Account Access
clientId:
label: Reseller ID
placeholder: Your Ubiquity Hosting API Reseller ID
apiUsername:
label: Remote ID
placeholder: Your Ubiquity Hosting Remote ID
apiToken:
label: Access Key
placeholder: Your Ubiquity Hosting Access Key
provided: Provided
accountHelp: >-
You can find your Ubiquity Hosting API credentials here. Don't have an account? Learn more about Ubiquity Hosting today!
loginAction: 'Next: Authenticate & Create a New Cloud Instance'
loadingInstance: Loading cloud instance creation details...
instanceSection: Instance
regionSection: Region
region:
label: Region
image:
label: Image
flavor:
label: Flavor
driverVsphere:
accountSection: Account Access
vcenter:
label: vCenter Host
placeholder: vCenter or ESXi hostname/IP
vcenterPort:
label: vCenter Port
username:
label: Username
password:
label: Password
instanceSection: Instance
cpuCount:
label: CPUs
memorySize:
label: Memory
unit: MB
diskSize:
label: Disk
unit: MB
boot2dockerUrl:
label: OS ISO URL
placeholder: 'Default: Latest boot2docker image'
schedulingSection: Scheduling
dataCenter:
label: Data Center
pool:
label: Pool
host:
label: Host
placeholder: Use '/' if using a cluster
network:
label: Network
dataStore:
label: Data Store
driverAliyunecs:
accountSection: Account Access Section
accessKey:
label: Access Key*
placeholder: Your Aliyun Account Access Key
accessKeySecret:
label: Access Key Secret*
placeholder: Your Key's secret
apiEndpoint:
label: Api Endpoint
placeholder: Private Aliyun Api Server Endpoint
instanceSection: Instance Section
instanceDescription:
label: Instance Description
placeholder: Instance Description
instanceType:
label: Instance Type
placeholder: Instance Type
systemImage:
label: System image
placeholder: System image
instanceTag:
label: Instance Tag
placeholder: Your Instance Tag in Aliyun
internetMaxBandwidth:
label: Internet Max Bandwidth
placeholder: 1 to 100
aliyunSLB:
label: Aliyun SLB ID
placeholder: Aliyun SLB ID
storageSection: Storage Info
isOptimized:
label: Instance Storage I/O Optimized
placeholder: none or optimized
systemDiskCategory:
label: System Disk Category
placeholder: 'When Storage is optimized, you can input cloud_efficiency, cloud_ssd or ephemeral_ssd.'
dataDiskCategory:
label: Data Disk Category
placeholder: 'When Storage is optimized, you can input cloud_efficiency, cloud_ssd or ephemeral_ssd.'
dataDiskSize:
label: Data Disk Size
placeholder: Disk Size
region:
label: Region
placeholder: Region
zone:
label: Available Zone
placeholder: Blank for auto select
networkSection: Network Section
routeCIDR:
label: Route CIDR
placeholder: e.g. 192.168.1.0/24
vpcId:
label: Aliyun VPC ID
placeholder: Aliyun VPC ID
vswitchId:
label: Aliyun Vswitch ID
placeholder: Aliyun Vswitch ID
privateIp:
label: Private IP
placeholder: Private IP in Private Network
privateAddressOnly:
label: Private Address Only
securitySection: Security Section
securityGroup:
label: Security Group
placeholder: Security Group
sshPassword:
label: SSH Password
placeholder: 'Set Instance SSH Password, Blank for Auto set'
modalAboutComponent:
component: Component
version: Version
cattle: Cattle
ui: User Interface
compose: Compose
machineService: Machine Service
close: Close
modalAuditlogInfo:
header: Additional Log Info
request: 'Request Object:'
response: 'Response Object:'
modalContainerStop:
uom: seconds
header: Are you sure you want to stop
helpText: The container will be forcibly terminated if it does not stop itself before the timeout expires
protip: 'ProTip: Hold the {key} key while clicking stop to bypass this confirmation.'
label: Timeout
placeholder: '10'
button: Stop
modalConfirmDeactivate:
header: Are you sure you want to
protip: 'ProTip: Hold the {key} key while clicking {isServiceButton} to bypass this confirmation.'
cancel: Cancel
buttons:
project:
message: deactivate your environment
button: Deactivate
environment:
message: stop services for
button: Stop Services
default:
message: deactivate
button: Deactivate
modalEditBackup:
edit: Edit Backup
create: Create Backup
nameLabel: Backup Name
backupTarget: Backup Target
backupTargetPlaceholder: Select a Backup target...
modalEditDriver:
header:
create: Add Machine Driver
edit: Edit Machine Driver
url:
label: Download URL
help: The URL to download the machine driver binary 64-bit Linux.
uiUrl:
label: Custom UI URL
help: 'Optional: The URL to load for customized Add Hosts screen for this driver.'
link: 'See ui-driver-skel for more info.'
checksum:
label: Checksum
help: 'Optional: Verify that the downloaded driver matches the expected checksum.'
modalEditSetting:
title: Edit Advanced Setting
name:
label: Name
value:
label: Value
reset:
label: Reset to Default
modalEditSnapshot:
edit: Edit Snapshot
create: Create Snapshot
nameLabel: Snapshot Name
modalFeedback:
header: 'Welcome to {appName}!'
subtitle: 'Before you get started, please tell us a little about yourself...'
send: Get Started
modalProcessError:
header: Exception Info
cause: 'Cause:'
none: N/A
stackTrace: 'Stack Trace:'
close: Close
modalRollbackVolume:
title:
snapshot: Rollback to a Snapshot
backup: Rollback to a Backup
modalShell:
title: 'Shell: {instanceName}'
modalWelcome:
header: 'Welcome to {appName}!'
closeModal: Got It
newAliasService:
header: Add Service Alias
newBalancer:
header:
add: Add Load Balancer
edit: Edit Load Balancer
upgrade: Upgrade Load Balancer
tabs:
ssl: SSL Termination
stickiness: Stickiness
custom: Custom haproxy.cfg
labels: Labels
scheduling: Scheduling
custom: >
Additional haproxy.cfg configuration can
be put here and will be merged together with the configuration generated by {appName}.
config:
prompt: Custom haproxy.cfg content
error:
noRules: Choose one or more port rules to listen on
noSourcePort: Source Port is required on each rule
invalidSourcePort: 'Invalid source port: ''{num}'''
invalidTargetPort: 'Invalid target port: ''{num}'''
mixedPort: 'Port {num} has multiple rules with conflicting access/protcols'
noTarget: Target is required on each rule
needsCertificate: A certificate is required because there are SSL/TLS port rules
newCatalog:
version:
prompt: Choose a version...
default: 'The default at the time (currently {version})'
saveUpgrade: Upgrade
saveNew: Launch
saveConfigure: Configure
upgrade: 'Upgrade:'
catalog: 'Catalog:'
category: 'Category:'
support: 'Support:'
official: Officially Certified
maintainedBy: Maintained by community members
maintainer: 'Maintainer:'
license: 'License:'
url: 'Project URL:'
titleAdd: 'Add {name} Stack'
titleUpgrade: 'Upgrade {name} Stack'
titleConfigure: 'Configure {name} Stack'
templateVersion: Template Version
selectVersionAdd: Select a version of the template to deploy
selectVersionUpgrade: Select a version of the template to upgrade to
selectVersionConfigure: Select a version of the template to configure
newStack: New Stack
config: Configuration Options
unknownType: 'Unrecognized question type:'
startService: Start services after creating
preview: Preview
txt: answers.txt
noConfig: This template has no configuration options
newContainer:
add:
container: Add Container
vm: Add Virtual Machine
service: |
Add {numServices, plural,
=1 {Service}
other {Services}
}
upgrade:
container: Upgrade Container
vm: Upgrade Virtual Machine
service: |
Upgrade {numServices, plural,
=1 {Service}
other {# Services}
}
tabs:
disks: Disks
userData: User Data
command: Command
volumes: Volumes
networking: Networking
security: Security/Host
healthCheck: Health Check
labels: Labels
scheduling: Scheduling
balancing: Balancing
selectUpgrade: Select one or more services to upgrade.
saveUpgrade: Upgrade
saveNew: Create
removeSidekick: Remove this Sidekick
name:
placeholder: e.g. myapp
description:
placeholder: e.g. My Application
emptyPrimaryService: (Primary Service)
emptySidekick: '(Sidekick #{num})'
addSidekickContainer: Add Sidekick Container
addSidekickVm: Add Sidekick VM
newExternalService:
header: Add External Service
alert: 'Note: This will only be used if the external service is a target of a load balancer.'
newReceiver:
title:
edit: Edit Receiver
add: Add Receiver
name:
placeholder: e.g. scale-web
driver:
label: Kind
action:
label: Action
service:
label: Target Service
amount:
label: By
min:
label: Minimum Scale
placeholder: e.g. 1
max:
label: Maximum Scale
placeholder: e.g. 20
pageFooter:
notARelease: (Not a Release)
help: Help
documentation: Documentation
faq: FAQs
issues: File an Issue
forums: Forums
download:
link: Download CLI
headerCli: Rancher CLI (beta)
headerCompose: Rancher Compose
mac: Mac OS X
windows: Windows
linux: Linux
pageHeaderEnvironment:
namespace: Namespace
projectRow:
none: No description
orchestration: Orchestration
projectUpgrade:
header: Upgrade Environment
detail: '{appName} {appVersion} includes changes that require upgrading the existing system services and load balancer containers.'
notOwner: Only an owner of this environment or an administrator can perform the upgrade.
actionButton: Upgrade Now
banner: Upgrading Environment...
registryRow:
address: Address
email: Email
username: Username
created: Created
reservationParameters:
label: Resource Limit
localStorage:
labelText: Local Storage
placeholder: e.g. 40960
unit: MB
memory:
labelText: Memory
placeholder: e.g. 2048
unit: MB
milliCpu:
labelText: CPU
placeholder: e.g. 1000
unit: mCPU
saveCancel:
saving: Saving...
saved: Saved!
edit: Save
create: Create
cancel: Cancel
schema:
inputBoolean:
'y': 'True'
'n': 'False'
inputCertificate:
prompt: Choose a Certificate...
inputEnum:
option: Choose an option...
inputService:
prompt: Choose a Service...
schedulingRuleRow:
theHost: The host
must: must
should: should
shouldNot: should not
mustNot: must not
haveA: have a
of: of
hostLabel: host label
containerLabel: container with label
serviceName: service with the name
containerName: container with the name
serviceLink:
withAlias:
sameStack: '{service} as {alias}'
differentStack: '{stack}/{service} as {alias}'
noAlias:
sameStack: '{service}'
differentStack: '{stack}/{service}'
sidekickAddtlInfo:
info: Info
image: Image
entryPoint: Entrypoint
command: Command
containers: Containers
noContainers: No Containers
labels: Labels
noLabels: No Labels
siteAccess:
header: Site Access
helpText: 'Configure who should be allowed to log in and use {appName}.'
unrestricted: 'Allow any valid {individuals}'
restricted: 'Allow members of Environments, plus Authorized {individuals} and {collection}'
required: 'Restrict access to only Authorized {individuals} and {collection}'
listHeader: 'Authorized {individuals} and {collection}'
noIdentity: None
users: Users
groups: Groups
organizations: Organizations
snapshotTimeline:
noData: No Snapshot Data
stackSection:
outputs: Outputs
description: Description
none: No Services
tags: Tags
container: |
{numContainers, plural,
=1 {Container}
other {Containers}
}
service: |
{numServices, plural,
=1 {Service}
other {Services}
}
sidekick: |
{numSidekicks, plural,
=1 {+ 1 Sidekick}
other {+ # Sidekicks}
}
add:
service: Add Service
loadBalancer: Add Load Balancer
serviceAlias: Add Service Alias
externalService: Add External Service
virtualMachine: Add Virtual Machine
table:
dataTitle:
state: State
serviceName: Service Name
kind: Kind
details: Details
containers: Containers
actions: Actions
upgradeImage: Upgrade Container Image
snapshotSection:
none: Not backed up
multiple: 'Multiple: {latestDate}'
storagePoolSection:
outputs: Outputs
readOnly: (read-only)
hosts:
header: Hosts
none: No Hosts
volumes:
header: Volumes
add: Add Volume
none: No Volumes
models:
table:
header:
volumeName: Volume Name
snapshotState: Snapshot State
snapshotName: Snapshot Name
backedUp: Backed Up
mounts: 'Mounts (Container: Path)'
svgServiceContainer:
sidekicks: Sidekicks
swarm:
containerSection:
state: State
name: Container Name
image: Image
none: No Containers
serviceSection:
state: State
name: Service Name
ports: Ports
containers: Containers
none: No Services
telemetryOpt:
header: Statistics
subtext: >
Rancher Labs would like to collect anonymous information about the configuration of your installation to help make {appName} better.