// -*- mode:c++; tab-width:2; indent-tabs-mode:nil; c-basic-offset:2 -*-
/*
 * Copyright 2010 ZXing authors All rights reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <limits>
#include <zxing/pdf417/detector/Detector.h>
#include <zxing/pdf417/detector/LinesSampler.h>
#include <zxing/common/GridSampler.h>
#include <zxing/common/detector/JavaMath.h>
#include <zxing/common/detector/MathUtils.h>
#include <algorithm>  // vs12, std::min und std:max

using std::max;
using std::abs;
using std::numeric_limits;
using zxing::pdf417::detector::Detector;
using zxing::common::detector::Math;
using zxing::common::detector::MathUtils;
using zxing::Ref;
using zxing::ArrayRef;
using zxing::DetectorResult;
using zxing::ResultPoint;
using zxing::Point;
using zxing::BitMatrix;
using zxing::GridSampler;

// VC++

using zxing::BinaryBitmap;
using zxing::DecodeHints;
using zxing::Line;

/**
 * <p>Encapsulates logic that can detect a PDF417 Code in an image, even if the
 * PDF417 Code is rotated or skewed, or partially obscured.</p>
 *
 * @author SITA Lab (kevin.osullivan@sita.aero)
 * @author Daniel Switkin (dswitkin@google.com)
 * @author Schweers Informationstechnologie GmbH (hartmut.neubauer@schweers.de)
 * @author creatale GmbH (christoph.schulz@creatale.de)
 */

const int Detector::MAX_AVG_VARIANCE= (int) (PATTERN_MATCH_RESULT_SCALE_FACTOR * 0.42f);
const int Detector::MAX_INDIVIDUAL_VARIANCE = (int) (PATTERN_MATCH_RESULT_SCALE_FACTOR * 0.8f);

// B S B S B S B S Bar/Space pattern
// 11111111 0 1 0 1 0 1 000
const int Detector::START_PATTERN[] = {8, 1, 1, 1, 1, 1, 1, 3};
const int Detector::START_PATTERN_LENGTH = sizeof(START_PATTERN) / sizeof(int);

// 11111111 0 1 0 1 0 1 000
const int Detector::START_PATTERN_REVERSE[] = {3, 1, 1, 1, 1, 1, 1, 8};
const int Detector::START_PATTERN_REVERSE_LENGTH = sizeof(START_PATTERN_REVERSE) / sizeof(int);

// 1111111 0 1 000 1 0 1 00 1
const int Detector::STOP_PATTERN[] = {7, 1, 1, 3, 1, 1, 1, 2, 1};
const int Detector::STOP_PATTERN_LENGTH = sizeof(STOP_PATTERN) / sizeof(int);

// B S B S B S B S B Bar/Space pattern
// 1111111 0 1 000 1 0 1 00 1
const int Detector::STOP_PATTERN_REVERSE[] = {1, 2, 1, 1, 1, 3, 1, 1, 7};
const int Detector::STOP_PATTERN_REVERSE_LENGTH = sizeof(STOP_PATTERN_REVERSE) / sizeof(int);

Detector::Detector(Ref<BinaryBitmap> image) : image_(image) {}

Ref<DetectorResult> Detector::detect() {
  return detect(DecodeHints());
}

Ref<DetectorResult> Detector::detect(DecodeHints const& hints) {
  (void)hints;
  // Fetch the 1 bit matrix once up front.
  Ref<BitMatrix> matrix = image_->getBlackMatrix();

  // Try to find the vertices assuming the image is upright.
  const int rowStep = 8;
  ArrayRef< Ref<ResultPoint> > vertices (findVertices(matrix, rowStep));
  if (!vertices) {
    // Maybe the image is rotated 180 degrees?
    vertices = findVertices180(matrix, rowStep);
    if (vertices) {
      correctVertices(matrix, vertices, true);
    }
  } else {
    correctVertices(matrix, vertices, false);
  }

  if (!vertices) {
    throw NotFoundException("No vertices found.");
  }
  
  float moduleWidth = computeModuleWidth(vertices);
  if (moduleWidth < 1.0f) {
    throw NotFoundException("Bad module width.");
  }
  
  int dimension = computeDimension(vertices[12], vertices[14],
                                   vertices[13], vertices[15], moduleWidth);
  if (dimension < 1) {
    throw NotFoundException("Bad dimension.");
  }
  
  int yDimension = max(computeYDimension(vertices[12], vertices[14],
                                         vertices[13], vertices[15], moduleWidth), dimension);

  // Deskew and sample lines from image.
  Ref<BitMatrix> linesMatrix = sampleLines(vertices, dimension, yDimension);
  Ref<BitMatrix> linesGrid(LinesSampler(linesMatrix, dimension).sample());

  ArrayRef< Ref<ResultPoint> > points(4);
  points[0] = vertices[5];
  points[1] = vertices[4];
  points[2] = vertices[6];
  points[3] = vertices[7];
  return Ref<DetectorResult>(new DetectorResult(linesGrid, points));
}

/**
 * Locate the vertices and the codewords area of a black blob using the Start
 * and Stop patterns as locators.
 *
 * @param matrix the scanned barcode image.
 * @param rowStep the step size for iterating rows (every n-th row).
 * @return an array containing the vertices:
 *           vertices[0] x, y top left barcode
 *           vertices[1] x, y bottom left barcode
 *           vertices[2] x, y top right barcode
 *           vertices[3] x, y bottom right barcode
 *           vertices[4] x, y top left codeword area
 *           vertices[5] x, y bottom left codeword area
 *           vertices[6] x, y top right codeword area
 *           vertices[7] x, y bottom right codeword area
 */
ArrayRef< Ref<ResultPoint> > Detector::findVertices(Ref<BitMatrix> matrix, int rowStep)
{
  const int height = matrix->getHeight();
  const int width = matrix->getWidth();
  
  ArrayRef< Ref<ResultPoint> > result(16);
  bool found = false;

  ArrayRef<int> counters(new Array<int>(START_PATTERN_LENGTH));

  // Top Left
  for (int i = 0; i < height; i += rowStep) {
    ArrayRef<int> loc = findGuardPattern(matrix, 0, i, width, false, START_PATTERN,
                                         START_PATTERN_LENGTH, counters);
    if (loc) {
      result[0] = new ResultPoint((float)loc[0], (float)i);
      result[4] = new ResultPoint((float)loc[1], (float)i);
      found = true;
      break;
    }
  }
  // Bottom left
  if (found) { // Found the Top Left vertex
    found = false;
    for (int i = height - 1; i > 0; i -= rowStep) {
      ArrayRef<int> loc = findGuardPattern(matrix, 0, i, width, false, START_PATTERN,
                                           START_PATTERN_LENGTH, counters);
      if (loc) {
        result[1] = new ResultPoint((float)loc[0], (float)i);
        result[5] = new ResultPoint((float)loc[1], (float)i);
        found = true;
        break;
      }
    }
  }

  counters = new Array<int>(STOP_PATTERN_LENGTH);

  // Top right
  if (found) { // Found the Bottom Left vertex
    found = false;
    for (int i = 0; i < height; i += rowStep) {
      ArrayRef<int> loc = findGuardPattern(matrix, 0, i, width, false, STOP_PATTERN,
                                           STOP_PATTERN_LENGTH, counters);
      if (loc) {
        result[2] = new ResultPoint((float)loc[1], (float)i);
        result[6] = new ResultPoint((float)loc[0], (float)i);
        found = true;
        break;
      }
    }
  }
  // Bottom right
  if (found) { // Found the Top right vertex
    found = false;
    for (int i = height - 1; i > 0; i -= rowStep) {
      ArrayRef<int> loc = findGuardPattern(matrix, 0, i, width, false, STOP_PATTERN,
                                           STOP_PATTERN_LENGTH, counters);
      if (loc) {
        result[3] = new ResultPoint((float)loc[1], (float)i);
        result[7] = new ResultPoint((float)loc[0], (float)i);
        found = true;
        break;
      }
    }
  }

  return found ? result : ArrayRef< Ref<ResultPoint> >();
}

ArrayRef< Ref<ResultPoint> > Detector::findVertices180(Ref<BitMatrix> matrix, int rowStep) {
  const int height = matrix->getHeight();
  const int width = matrix->getWidth();
  const int halfWidth = width >> 1;
  
  ArrayRef< Ref<ResultPoint> > result(16);
  bool found = false;
  
  ArrayRef<int> counters = new Array<int>(START_PATTERN_REVERSE_LENGTH);
  
  // Top Left
  for (int i = height - 1; i > 0; i -= rowStep) {
    ArrayRef<int> loc =
        findGuardPattern(matrix, halfWidth, i, halfWidth, true, START_PATTERN_REVERSE,
                         START_PATTERN_REVERSE_LENGTH, counters);
    if (loc) {
      result[0] = new ResultPoint((float)loc[1], (float)i);
      result[4] = new ResultPoint((float)loc[0], (float)i);
      found = true;
      break;
    }
  }
  // Bottom Left
  if (found) { // Found the Top Left vertex
    found = false;
    for (int i = 0; i < height; i += rowStep) {
      ArrayRef<int> loc =
          findGuardPattern(matrix, halfWidth, i, halfWidth, true, START_PATTERN_REVERSE,
                           START_PATTERN_REVERSE_LENGTH, counters);
      if (loc) {
        result[1] = new ResultPoint((float)loc[1], (float)i);
        result[5] = new ResultPoint((float)loc[0], (float)i);
        found = true;
        break;
      }
    }
  }

  counters = new Array<int>(STOP_PATTERN_REVERSE_LENGTH);

  // Top Right
  if (found) { // Found the Bottom Left vertex
    found = false;
    for (int i = height - 1; i > 0; i -= rowStep) {
      ArrayRef<int> loc = findGuardPattern(matrix, 0, i, halfWidth, false, STOP_PATTERN_REVERSE,
                                           STOP_PATTERN_REVERSE_LENGTH, counters);
      if (loc) {
        result[2] = new ResultPoint((float)loc[0], (float)i);
        result[6] = new ResultPoint((float)loc[1], (float)i);
        found = true;
        break;
      }
    }
  }
  // Bottom Right
  if (found) { // Found the Top Right vertex
    found = false;
    for (int i = 0; i < height; i += rowStep) {
      ArrayRef<int> loc = findGuardPattern(matrix, 0, i, halfWidth, false, STOP_PATTERN_REVERSE,
                                           STOP_PATTERN_REVERSE_LENGTH, counters);
      if (loc) {
        result[3] = new ResultPoint((float)loc[0], (float)i);
        result[7] = new ResultPoint((float)loc[1], (float)i);
        found = true;
        break;
      }
    }
  }

  return found ? result : ArrayRef< Ref<ResultPoint> >();
}

/**
 * @param matrix row of black/white values to search
 * @param column x position to start search
 * @param row y position to start search
 * @param width the number of pixels to search on this row
 * @param pattern pattern of counts of number of black and white pixels that are
 *                 being searched for as a pattern
 * @param counters array of counters, as long as pattern, to re-use
 * @return start/end horizontal offset of guard pattern, as an array of two ints.
 */
ArrayRef<int> Detector::findGuardPattern(Ref<BitMatrix> matrix,
                                         int column,
                                         int row,
                                         int width,
                                         bool whiteFirst,
                                         const int pattern[],
                                         int patternSize,
                                         ArrayRef<int>& counters) {
  counters->values().assign(counters->size(), 0);
  int patternLength = patternSize;
  bool isWhite = whiteFirst;

  int counterPosition = 0;
  int patternStart = column;
  for (int x = column; x < column + width; x++) {
    bool pixel = matrix->get(x, row);
    if (pixel ^ isWhite) {
      counters[counterPosition]++;
    } else {
      if (counterPosition == patternLength - 1) {
        if (patternMatchVariance(counters, pattern,
                                 MAX_INDIVIDUAL_VARIANCE) < MAX_AVG_VARIANCE) {
          ArrayRef<int> result = new Array<int>(2);
          result[0] = patternStart;
          result[1] = x;
          return result;
        }
        patternStart += counters[0] + counters[1];
        for(int i = 0; i < patternLength - 2; ++i)
          counters[i] = counters[ i + 2];
        counters[patternLength - 2] = 0;
        counters[patternLength - 1] = 0;
        counterPosition--;
      } else {
        counterPosition++;
      }
      counters[counterPosition] = 1;
      isWhite = !isWhite;
    }
  }
  return ArrayRef<int>();
}

/**
 * Determines how closely a set of observed counts of runs of black/white
 * values matches a given target pattern. This is reported as the ratio of
 * the total variance from the expected pattern proportions across all
 * pattern elements, to the length of the pattern.
 *
 * @param counters observed counters
 * @param pattern expected pattern
 * @param maxIndividualVariance The most any counter can differ before we give up
 * @return ratio of total variance between counters and pattern compared to
 *         total pattern size, where the ratio has been multiplied by 256.
 *         So, 0 means no variance (perfect match); 256 means the total
 *         variance between counters and patterns equals the pattern length,
 *         higher values mean even more variance
 */
int Detector::patternMatchVariance(ArrayRef<int>& counters,
                                   const int pattern[],
                                   int maxIndividualVariance)
{
  int numCounters = counters->size();
  int total = 0;
  int patternLength = 0;
  for (int i = 0; i < numCounters; i++) {
    total += counters[i];
    patternLength += pattern[i];
  }
  if (total < patternLength) {
    // If we don't even have one pixel per unit of bar width, assume this
    // is too small to reliably match, so fail:
    return numeric_limits<int>::max();
  }
  // We're going to fake floating-point math in integers. We just need to use more bits.
  // Scale up patternLength so that intermediate values below like scaledCounter will have
  // more "significant digits".
  int unitBarWidth = (total << 8) / patternLength;
  maxIndividualVariance = (maxIndividualVariance * unitBarWidth) >> 8;

  int totalVariance = 0;
  for (int x = 0; x < numCounters; x++) {
    int counter = counters[x] << 8;
    int scaledPattern = pattern[x] * unitBarWidth;
    int variance = counter > scaledPattern ? counter - scaledPattern : scaledPattern - counter;
    if (variance > maxIndividualVariance) {
      return numeric_limits<int>::max();
    }
    totalVariance += variance;
  }
  return totalVariance / total;
}

/**
 * <p>Correct the vertices by searching for top and bottom vertices of wide
 * bars, then locate the intersections between the upper and lower horizontal
 * line and the inner vertices vertical lines.</p>
 *
 * @param matrix the scanned barcode image.
 * @param vertices the vertices vector is extended and the new members are:
 *           vertices[ 8] x,y point on upper border of left wide bar
 *           vertices[ 9] x,y point on lower border of left wide bar
 *           vertices[10] x,y point on upper border of right wide bar
 *           vertices[11] x,y point on lower border of right wide bar
 *           vertices[12] x,y final top left codeword area
 *           vertices[13] x,y final bottom left codeword area
 *           vertices[14] x,y final top right codeword area
 *           vertices[15] x,y final bottom right codeword area
 * @param upsideDown true if rotated by 180 degree.
 */
void Detector::correctVertices(Ref<BitMatrix> matrix,
                               ArrayRef< Ref<ResultPoint> >& vertices,
                               bool upsideDown)
{
  bool isLowLeft = abs(vertices[4]->getY() - vertices[5]->getY()) < 20.0;
  bool isLowRight = abs(vertices[6]->getY() - vertices[7]->getY()) < 20.0;
  if (isLowLeft || isLowRight) {
    throw NotFoundException("Cannot find enough PDF417 guard patterns!");
  } else {
    findWideBarTopBottom(matrix, vertices, 0, 0,  8, 17, upsideDown ? 1 : -1);
    findWideBarTopBottom(matrix, vertices, 1, 0,  8, 17, upsideDown ? -1 : 1);
    findWideBarTopBottom(matrix, vertices, 2, 11, 7, 18, upsideDown ? 1 : -1);
    findWideBarTopBottom(matrix, vertices, 3, 11, 7, 18, upsideDown ? -1 : 1);
    findCrossingPoint(vertices, 12, 4, 5, 8, 10, matrix);
    findCrossingPoint(vertices, 13, 4, 5, 9, 11, matrix);
    findCrossingPoint(vertices, 14, 6, 7, 8, 10, matrix);
    findCrossingPoint(vertices, 15, 6, 7, 9, 11, matrix);
  }
}

/**
 * <p>Locate the top or bottom of one of the two wide black bars of a guard pattern.</p>
 *
 * <p>Warning: it only searches along the y axis, so the return points would not be
 * right if the barcode is too curved.</p>
 *
 * @param matrix The bit matrix.
 * @param vertices The 16 vertices located by findVertices(); the result
 *           points are stored into vertices[8], ... , vertices[11].
 * @param offsetVertice The offset of the outer vertice and the inner
 *           vertice (+ 4) to be corrected and (+ 8) where the result is stored.
 * @param startWideBar start of a wide bar.
 * @param lenWideBar length of wide bar.
 * @param lenPattern length of the pattern.
 * @param rowStep +1 if corner should be exceeded towards the bottom, -1 towards the top.
 */
void Detector::findWideBarTopBottom(Ref<BitMatrix> matrix,
                                    ArrayRef< Ref<ResultPoint> > &vertices,
                                    int offsetVertice,
                                    int startWideBar,
                                    int lenWideBar,
                                    int lenPattern,
                                    int rowStep)
{
  Ref<ResultPoint> verticeStart(vertices[offsetVertice]);
  Ref<ResultPoint> verticeEnd(vertices[offsetVertice + 4]);

  // Start horizontally at the middle of the bar.
  int endWideBar = startWideBar + lenWideBar;
  float barDiff = verticeEnd->getX() - verticeStart->getX();
  float barStart = verticeStart->getX() + barDiff * (float)startWideBar / (float)lenPattern;
  float barEnd = verticeStart->getX() + barDiff * (float)endWideBar / (float)lenPattern;
  int x = Math::round((barStart + barEnd) / 2.0f);

  // Start vertically between the preliminary vertices.
  int yStart = Math::round(verticeStart->getY());
  int y = yStart;

  // Find offset of thin bar to the right as additional safeguard.
  int nextBarX = int(max(barStart, barEnd) + 1);
  for (; nextBarX < matrix->getWidth(); nextBarX++)
    if (!matrix->get(nextBarX - 1, y) && matrix->get(nextBarX, y)) break;
  nextBarX -= x;

  bool isEnd = false;
  while (!isEnd) {
    if (matrix->get(x, y)) {
      // If the thin bar to the right ended, stop as well
      isEnd = !matrix->get(x + nextBarX, y) && !matrix->get(x + nextBarX + 1, y);
      y += rowStep;
      if (y <= 0 || y >= (int)matrix->getHeight() - 1) {
        // End of barcode image reached.
        isEnd = true;
      }
    } else {
      // Look sidewise whether black bar continues? (in the case the image is skewed)
      if (x > 0 && matrix->get(x - 1, y)) {
        x--;
      } else if (x < (int)matrix->getWidth() - 1 && matrix->get(x + 1, y)) {
        x++;
      } else {
        // End of pattern regarding big bar and big gap reached.
        isEnd = true;
        if (y != yStart) {
          // Turn back one step, because target has been exceeded.
          y -= rowStep;
        }
      }
    }
  }

  vertices[offsetVertice + 8] = new ResultPoint((float)x, (float)y);
}

/**
 * <p>Finds the intersection of two lines.</p>
 *
 * @param vertices The reference of the vertices vector
 * @param idxResult Index of result point inside the vertices vector.
 * @param idxLineA1
 * @param idxLineA2 Indices two points inside the vertices vector that define the first line.
 * @param idxLineB1
 * @param idxLineB2 Indices two points inside the vertices vector that define the second line.
 * @param matrix: bit matrix, here only for testing whether the result is inside the matrix.
 * @return Returns true when the result is valid and lies inside the matrix. Otherwise throws an
 * exception.
 **/
void Detector::findCrossingPoint(ArrayRef< Ref<ResultPoint> >& vertices,
                                 int idxResult,
                                 int idxLineA1, int idxLineA2,
                                 int idxLineB1, int idxLineB2,
                                 Ref<BitMatrix>& matrix)
{
  Point p1(vertices[idxLineA1]->getX(), vertices[idxLineA1]->getY());
  Point p2(vertices[idxLineA2]->getX(), vertices[idxLineA2]->getY());
  Point p3(vertices[idxLineB1]->getX(), vertices[idxLineB1]->getY());
  Point p4(vertices[idxLineB2]->getX(), vertices[idxLineB2]->getY());

  Point result(intersection(Line(p1, p2), Line(p3, p4)));
  if (result.x == numeric_limits<float>::infinity() ||
      result.y == numeric_limits<float>::infinity()) {
    throw NotFoundException("PDF:Detector: cannot find the crossing of parallel lines!");
  }

  int x = Math::round(result.x);
  int y = Math::round(result.y);
  if (x < 0 || x >= (int)matrix->getWidth() || y < 0 || y >= (int)matrix->getHeight()) {
    throw NotFoundException("PDF:Detector: crossing points out of region!");
  }

  vertices[idxResult] = Ref<ResultPoint>(new ResultPoint(result.x, result.y));
}

/**
 * Computes the intersection between two lines.
 */
Point Detector::intersection(Line a, Line b) {
  float dxa = a.start.x - a.end.x;
  float dxb = b.start.x - b.end.x;
  float dya = a.start.y - a.end.y;
  float dyb = b.start.y - b.end.y;

  float p = a.start.x * a.end.y - a.start.y * a.end.x;
  float q = b.start.x * b.end.y - b.start.y * b.end.x;
  float denom = dxa * dyb - dya * dxb;
  if(abs(denom) < 1e-12)  // Lines don't intersect (replaces "denom == 0")
    return Point(numeric_limits<float>::infinity(),
                 numeric_limits<float>::infinity());

  float x = (p * dxb - dxa * q) / denom;
  float y = (p * dyb - dya * q) / denom;

  return Point(x, y);
}

/**
 * <p>Estimates module size (pixels in a module) based on the Start and End
 * finder patterns.</p>
 *
 * @param vertices an array of vertices:
 *           vertices[0] x, y top left barcode
 *           vertices[1] x, y bottom left barcode
 *           vertices[2] x, y top right barcode
 *           vertices[3] x, y bottom right barcode
 *           vertices[4] x, y top left codeword area
 *           vertices[5] x, y bottom left codeword area
 *           vertices[6] x, y top right codeword area
 *           vertices[7] x, y bottom right codeword area
 * @return the module size.
 */
float Detector::computeModuleWidth(ArrayRef< Ref<ResultPoint> >& vertices) {
  float pixels1 = ResultPoint::distance(vertices[0], vertices[4]);
  float pixels2 = ResultPoint::distance(vertices[1], vertices[5]);
  float moduleWidth1 = (pixels1 + pixels2) / (17 * 2.0f);
  float pixels3 = ResultPoint::distance(vertices[6], vertices[2]);
  float pixels4 = ResultPoint::distance(vertices[7], vertices[3]);
  float moduleWidth2 = (pixels3 + pixels4) / (18 * 2.0f);
  return (moduleWidth1 + moduleWidth2) / 2.0f;
}

/**
 * Computes the dimension (number of modules in a row) of the PDF417 Code
 * based on vertices of the codeword area and estimated module size.
 *
 * @param topLeft     of codeword area
 * @param topRight    of codeword area
 * @param bottomLeft  of codeword area
 * @param bottomRight of codeword are
 * @param moduleWidth estimated module size
 * @return the number of modules in a row.
 */
int Detector::computeDimension(Ref<ResultPoint> const& topLeft,
                               Ref<ResultPoint> const& topRight,
                               Ref<ResultPoint> const& bottomLeft,
                               Ref<ResultPoint> const& bottomRight,
                               float moduleWidth)
{
  int topRowDimension = MathUtils::round(ResultPoint::distance(topLeft, topRight) / moduleWidth);
  int bottomRowDimension =
      MathUtils::round(ResultPoint::distance(bottomLeft, bottomRight) / moduleWidth);
  return ((((topRowDimension + bottomRowDimension) >> 1) + 8) / 17) * 17;
}

/**
 * Computes the y dimension (number of modules in a column) of the PDF417 Code
 * based on vertices of the codeword area and estimated module size.
 *
 * @param topLeft     of codeword area
 * @param topRight    of codeword area
 * @param bottomLeft  of codeword area
 * @param bottomRight of codeword are
 * @param moduleWidth estimated module size
 * @return the number of modules in a row.
 */
int Detector::computeYDimension(Ref<ResultPoint> const& topLeft,
                                Ref<ResultPoint> const& topRight,
                                Ref<ResultPoint> const& bottomLeft,
                                Ref<ResultPoint> const& bottomRight,
                                float moduleWidth)
{
  int leftColumnDimension =
      MathUtils::round(ResultPoint::distance(topLeft, bottomLeft) / moduleWidth);
  int rightColumnDimension =
      MathUtils::round(ResultPoint::distance(topRight, bottomRight) / moduleWidth);
  return (leftColumnDimension + rightColumnDimension) >> 1;
}

/**
 * Deskew and over-sample image.
 *
 * @param vertices vertices from findVertices()
 * @param dimension x dimension
 * @param yDimension y dimension
 * @return an over-sampled BitMatrix.
 */
Ref<BitMatrix> Detector::sampleLines(ArrayRef< Ref<ResultPoint> > const& vertices,
                                     int dimensionY,
                                     int dimension) {
  const int sampleDimensionX = dimension * 8;
  const int sampleDimensionY = dimensionY * 4;
  Ref<PerspectiveTransform> transform(
      PerspectiveTransform::quadrilateralToQuadrilateral(
          0.0f, 0.0f,
          (float)sampleDimensionX, 0.0f,
          0.0f, (float)sampleDimensionY,
          (float)sampleDimensionX, (float)sampleDimensionY,
          vertices[12]->getX(), vertices[12]->getY(),
          vertices[14]->getX(), vertices[14]->getY(),
          vertices[13]->getX(), vertices[13]->getY(),
          vertices[15]->getX(), vertices[15]->getY()));

  Ref<BitMatrix> linesMatrix = GridSampler::getInstance().sampleGrid(
      image_->getBlackMatrix(), sampleDimensionX, sampleDimensionY, transform);


  return linesMatrix;
}