/*! *****************************************************************************
Copyright (c) Microsoft Corporation. All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use
this file except in compliance with the License. You may obtain a copy of the
License at http://www.apache.org/licenses/LICENSE-2.0
THIS CODE IS PROVIDED ON AN *AS IS* BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED
WARRANTIES OR CONDITIONS OF TITLE, FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABLITY OR NON-INFRINGEMENT.
See the Apache Version 2.0 License for specific language governing permissions
and limitations under the License.
***************************************************************************** */
///
interface Array {
/**
* Returns the value of the first element in the array where predicate is true, and undefined
* otherwise.
* @param predicate find calls predicate once for each element of the array, in ascending
* order, until it finds one where predicate returns true. If such an element is found, find
* immediately returns that element value. Otherwise, find returns undefined.
* @param thisArg If provided, it will be used as the this value for each invocation of
* predicate. If it is not provided, undefined is used instead.
*/
find(predicate: (this: void, value: T, index: number, obj: T[]) => value is S, thisArg?: any): S | undefined;
find(predicate: (value: T, index: number, obj: T[]) => unknown, thisArg?: any): T | undefined;
/**
* Returns the index of the first element in the array where predicate is true, and -1
* otherwise.
* @param predicate find calls predicate once for each element of the array, in ascending
* order, until it finds one where predicate returns true. If such an element is found,
* findIndex immediately returns that element index. Otherwise, findIndex returns -1.
* @param thisArg If provided, it will be used as the this value for each invocation of
* predicate. If it is not provided, undefined is used instead.
*/
findIndex(predicate: (value: T, index: number, obj: T[]) => unknown, thisArg?: any): number;
/**
* Returns the this object after filling the section identified by start and end with value
* @param value value to fill array section with
* @param start index to start filling the array at. If start is negative, it is treated as
* length+start where length is the length of the array.
* @param end index to stop filling the array at. If end is negative, it is treated as
* length+end.
*/
fill(value: T, start?: number, end?: number): this;
/**
* Returns the this object after copying a section of the array identified by start and end
* to the same array starting at position target
* @param target If target is negative, it is treated as length+target where length is the
* length of the array.
* @param start If start is negative, it is treated as length+start. If end is negative, it
* is treated as length+end.
* @param end If not specified, length of the this object is used as its default value.
*/
copyWithin(target: number, start: number, end?: number): this;
}
interface ArrayConstructor {
/**
* Creates an array from an array-like object.
* @param arrayLike An array-like object to convert to an array.
*/
from(arrayLike: ArrayLike): T[];
/**
* Creates an array from an iterable object.
* @param arrayLike An array-like object to convert to an array.
* @param mapfn A mapping function to call on every element of the array.
* @param thisArg Value of 'this' used to invoke the mapfn.
*/
from(arrayLike: ArrayLike, mapfn: (v: T, k: number) => U, thisArg?: any): U[];
/**
* Returns a new array from a set of elements.
* @param items A set of elements to include in the new array object.
*/
of(...items: T[]): T[];
}
interface DateConstructor {
new (value: number | string | Date): Date;
}
interface Function {
/**
* Returns the name of the function. Function names are read-only and can not be changed.
*/
readonly name: string;
}
interface Math {
/**
* Returns the number of leading zero bits in the 32-bit binary representation of a number.
* @param x A numeric expression.
*/
clz32(x: number): number;
/**
* Returns the result of 32-bit multiplication of two numbers.
* @param x First number
* @param y Second number
*/
imul(x: number, y: number): number;
/**
* Returns the sign of the x, indicating whether x is positive, negative or zero.
* @param x The numeric expression to test
*/
sign(x: number): number;
/**
* Returns the base 10 logarithm of a number.
* @param x A numeric expression.
*/
log10(x: number): number;
/**
* Returns the base 2 logarithm of a number.
* @param x A numeric expression.
*/
log2(x: number): number;
/**
* Returns the natural logarithm of 1 + x.
* @param x A numeric expression.
*/
log1p(x: number): number;
/**
* Returns the result of (e^x - 1), which is an implementation-dependent approximation to
* subtracting 1 from the exponential function of x (e raised to the power of x, where e
* is the base of the natural logarithms).
* @param x A numeric expression.
*/
expm1(x: number): number;
/**
* Returns the hyperbolic cosine of a number.
* @param x A numeric expression that contains an angle measured in radians.
*/
cosh(x: number): number;
/**
* Returns the hyperbolic sine of a number.
* @param x A numeric expression that contains an angle measured in radians.
*/
sinh(x: number): number;
/**
* Returns the hyperbolic tangent of a number.
* @param x A numeric expression that contains an angle measured in radians.
*/
tanh(x: number): number;
/**
* Returns the inverse hyperbolic cosine of a number.
* @param x A numeric expression that contains an angle measured in radians.
*/
acosh(x: number): number;
/**
* Returns the inverse hyperbolic sine of a number.
* @param x A numeric expression that contains an angle measured in radians.
*/
asinh(x: number): number;
/**
* Returns the inverse hyperbolic tangent of a number.
* @param x A numeric expression that contains an angle measured in radians.
*/
atanh(x: number): number;
/**
* Returns the square root of the sum of squares of its arguments.
* @param values Values to compute the square root for.
* If no arguments are passed, the result is +0.
* If there is only one argument, the result is the absolute value.
* If any argument is +Infinity or -Infinity, the result is +Infinity.
* If any argument is NaN, the result is NaN.
* If all arguments are either +0 or −0, the result is +0.
*/
hypot(...values: number[]): number;
/**
* Returns the integral part of the a numeric expression, x, removing any fractional digits.
* If x is already an integer, the result is x.
* @param x A numeric expression.
*/
trunc(x: number): number;
/**
* Returns the nearest single precision float representation of a number.
* @param x A numeric expression.
*/
fround(x: number): number;
/**
* Returns an implementation-dependent approximation to the cube root of number.
* @param x A numeric expression.
*/
cbrt(x: number): number;
}
interface NumberConstructor {
/**
* The value of Number.EPSILON is the difference between 1 and the smallest value greater than 1
* that is representable as a Number value, which is approximately:
* 2.2204460492503130808472633361816 x 10−16.
*/
readonly EPSILON: number;
/**
* Returns true if passed value is finite.
* Unlike the global isFinite, Number.isFinite doesn't forcibly convert the parameter to a
* number. Only finite values of the type number, result in true.
* @param number A numeric value.
*/
isFinite(number: unknown): boolean;
/**
* Returns true if the value passed is an integer, false otherwise.
* @param number A numeric value.
*/
isInteger(number: unknown): boolean;
/**
* Returns a Boolean value that indicates whether a value is the reserved value NaN (not a
* number). Unlike the global isNaN(), Number.isNaN() doesn't forcefully convert the parameter
* to a number. Only values of the type number, that are also NaN, result in true.
* @param number A numeric value.
*/
isNaN(number: unknown): boolean;
/**
* Returns true if the value passed is a safe integer.
* @param number A numeric value.
*/
isSafeInteger(number: unknown): boolean;
/**
* The value of the largest integer n such that n and n + 1 are both exactly representable as
* a Number value.
* The value of Number.MAX_SAFE_INTEGER is 9007199254740991 2^53 − 1.
*/
readonly MAX_SAFE_INTEGER: number;
/**
* The value of the smallest integer n such that n and n − 1 are both exactly representable as
* a Number value.
* The value of Number.MIN_SAFE_INTEGER is −9007199254740991 (−(2^53 − 1)).
*/
readonly MIN_SAFE_INTEGER: number;
/**
* Converts a string to a floating-point number.
* @param string A string that contains a floating-point number.
*/
parseFloat(string: string): number;
/**
* Converts A string to an integer.
* @param string A string to convert into a number.
* @param radix A value between 2 and 36 that specifies the base of the number in `string`.
* If this argument is not supplied, strings with a prefix of '0x' are considered hexadecimal.
* All other strings are considered decimal.
*/
parseInt(string: string, radix?: number): number;
}
interface ObjectConstructor {
/**
* Copy the values of all of the enumerable own properties from one or more source objects to a
* target object. Returns the target object.
* @param target The target object to copy to.
* @param source The source object from which to copy properties.
*/
assign(target: T, source: U): T & U;
/**
* Copy the values of all of the enumerable own properties from one or more source objects to a
* target object. Returns the target object.
* @param target The target object to copy to.
* @param source1 The first source object from which to copy properties.
* @param source2 The second source object from which to copy properties.
*/
assign(target: T, source1: U, source2: V): T & U & V;
/**
* Copy the values of all of the enumerable own properties from one or more source objects to a
* target object. Returns the target object.
* @param target The target object to copy to.
* @param source1 The first source object from which to copy properties.
* @param source2 The second source object from which to copy properties.
* @param source3 The third source object from which to copy properties.
*/
assign(target: T, source1: U, source2: V, source3: W): T & U & V & W;
/**
* Copy the values of all of the enumerable own properties from one or more source objects to a
* target object. Returns the target object.
* @param target The target object to copy to.
* @param sources One or more source objects from which to copy properties
*/
assign(target: object, ...sources: any[]): any;
/**
* Returns an array of all symbol properties found directly on object o.
* @param o Object to retrieve the symbols from.
*/
getOwnPropertySymbols(o: any): symbol[];
/**
* Returns the names of the enumerable string properties and methods of an object.
* @param o Object that contains the properties and methods. This can be an object that you created or an existing Document Object Model (DOM) object.
*/
keys(o: {}): string[];
/**
* Returns true if the values are the same value, false otherwise.
* @param value1 The first value.
* @param value2 The second value.
*/
is(value1: any, value2: any): boolean;
/**
* Sets the prototype of a specified object o to object proto or null. Returns the object o.
* @param o The object to change its prototype.
* @param proto The value of the new prototype or null.
*/
setPrototypeOf(o: any, proto: object | null): any;
}
interface ReadonlyArray {
/**
* Returns the value of the first element in the array where predicate is true, and undefined
* otherwise.
* @param predicate find calls predicate once for each element of the array, in ascending
* order, until it finds one where predicate returns true. If such an element is found, find
* immediately returns that element value. Otherwise, find returns undefined.
* @param thisArg If provided, it will be used as the this value for each invocation of
* predicate. If it is not provided, undefined is used instead.
*/
find(predicate: (this: void, value: T, index: number, obj: readonly T[]) => value is S, thisArg?: any): S | undefined;
find(predicate: (value: T, index: number, obj: readonly T[]) => unknown, thisArg?: any): T | undefined;
/**
* Returns the index of the first element in the array where predicate is true, and -1
* otherwise.
* @param predicate find calls predicate once for each element of the array, in ascending
* order, until it finds one where predicate returns true. If such an element is found,
* findIndex immediately returns that element index. Otherwise, findIndex returns -1.
* @param thisArg If provided, it will be used as the this value for each invocation of
* predicate. If it is not provided, undefined is used instead.
*/
findIndex(predicate: (value: T, index: number, obj: readonly T[]) => unknown, thisArg?: any): number;
}
interface RegExp {
/**
* Returns a string indicating the flags of the regular expression in question. This field is read-only.
* The characters in this string are sequenced and concatenated in the following order:
*
* - "g" for global
* - "i" for ignoreCase
* - "m" for multiline
* - "u" for unicode
* - "y" for sticky
*
* If no flags are set, the value is the empty string.
*/
readonly flags: string;
/**
* Returns a Boolean value indicating the state of the sticky flag (y) used with a regular
* expression. Default is false. Read-only.
*/
readonly sticky: boolean;
/**
* Returns a Boolean value indicating the state of the Unicode flag (u) used with a regular
* expression. Default is false. Read-only.
*/
readonly unicode: boolean;
}
interface RegExpConstructor {
new (pattern: RegExp | string, flags?: string): RegExp;
(pattern: RegExp | string, flags?: string): RegExp;
}
interface String {
/**
* Returns a nonnegative integer Number less than 1114112 (0x110000) that is the code point
* value of the UTF-16 encoded code point starting at the string element at position pos in
* the String resulting from converting this object to a String.
* If there is no element at that position, the result is undefined.
* If a valid UTF-16 surrogate pair does not begin at pos, the result is the code unit at pos.
*/
codePointAt(pos: number): number | undefined;
/**
* Returns true if searchString appears as a substring of the result of converting this
* object to a String, at one or more positions that are
* greater than or equal to position; otherwise, returns false.
* @param searchString search string
* @param position If position is undefined, 0 is assumed, so as to search all of the String.
*/
includes(searchString: string, position?: number): boolean;
/**
* Returns true if the sequence of elements of searchString converted to a String is the
* same as the corresponding elements of this object (converted to a String) starting at
* endPosition – length(this). Otherwise returns false.
*/
endsWith(searchString: string, endPosition?: number): boolean;
/**
* Returns the String value result of normalizing the string into the normalization form
* named by form as specified in Unicode Standard Annex #15, Unicode Normalization Forms.
* @param form Applicable values: "NFC", "NFD", "NFKC", or "NFKD", If not specified default
* is "NFC"
*/
normalize(form: "NFC" | "NFD" | "NFKC" | "NFKD"): string;
/**
* Returns the String value result of normalizing the string into the normalization form
* named by form as specified in Unicode Standard Annex #15, Unicode Normalization Forms.
* @param form Applicable values: "NFC", "NFD", "NFKC", or "NFKD", If not specified default
* is "NFC"
*/
normalize(form?: string): string;
/**
* Returns a String value that is made from count copies appended together. If count is 0,
* the empty string is returned.
* @param count number of copies to append
*/
repeat(count: number): string;
/**
* Returns true if the sequence of elements of searchString converted to a String is the
* same as the corresponding elements of this object (converted to a String) starting at
* position. Otherwise returns false.
*/
startsWith(searchString: string, position?: number): boolean;
/**
* Returns an `` HTML anchor element and sets the name attribute to the text value
* @param name
*/
anchor(name: string): string;
/** Returns a `` HTML element */
big(): string;
/** Returns a `