/**
 * Aqara — brand-specific Zigbee2MQTT payload types.
 */
import type { PresencePayload, PresenceSetCommand, TemperatureHumidityPayload, WaterLeakPayload } from "./common.js";
/**
 * Action values for Aqara Wireless Remote Switch H1 (double rocker).
 *
 * Supports single, double, triple tap and hold on left, right, or both buttons.
 *
 * Supported devices:
 * - Aqara WXKG15LM / WRS-R02 (Wireless Remote Switch H1, double rocker)
 */
export type AqaraRemoteSwitchH1Action = "single_left" | "single_right" | "single_both" | "double_left" | "double_right" | "double_both" | "triple_left" | "triple_right" | "triple_both" | "hold_left" | "hold_right" | "hold_both";
/** Click mode for Aqara Wireless Remote Switch H1. */
export type AqaraClickMode = "fast" | "multi";
/** Operation mode for Aqara Wireless Remote Switch H1. */
export type AqaraOperationMode = "command" | "event";
/**
 * State payload for Aqara Wireless Remote Switch H1.
 *
 * Supported devices:
 * - Aqara WXKG15LM / WRS-R02 (Wireless Remote Switch H1, double rocker)
 */
export interface AqaraRemoteSwitchH1Payload {
    action: AqaraRemoteSwitchH1Action;
    battery?: number;
    voltage?: number;
    click_mode?: AqaraClickMode;
    operation_mode?: AqaraOperationMode;
    linkquality?: number;
}
/**
 * Set command for Aqara Wireless Remote Switch H1.
 *
 * Supported devices:
 * - Aqara WXKG15LM / WRS-R02 (Wireless Remote Switch H1, double rocker)
 */
export interface AqaraRemoteSwitchH1SetCommand {
    click_mode?: AqaraClickMode;
    operation_mode?: AqaraOperationMode;
}
/**
 * State payload for Aqara water leak sensor.
 *
 * Supported devices:
 * - Aqara SJCGQ11LM (water leak sensor)
 */
export interface AqaraWaterLeakPayload extends WaterLeakPayload {
    /** Number of power outages recorded by the device. */
    power_outage_count?: number;
    /** Number of times the sensor has been triggered. */
    trigger_count?: number;
}
/**
 * State payload for Aqara temperature, humidity, and pressure sensor.
 *
 * Supported devices:
 * - Aqara WSDCGQ11LM (temperature/humidity/pressure sensor)
 */
export interface AqaraTemperatureHumidityPayload extends TemperatureHumidityPayload {
}
/**
 * State payload for Aqara mmWave presence sensor.
 *
 * Extends the generic `PresencePayload` with FP300-specific fields including PIR
 * detection, AI configuration, and zone-based detection range.
 *
 * Supported devices:
 * - Aqara PS-S04D / FP300 (mmWave + PIR presence sensor)
 */
export interface AqaraPresencePayload extends PresencePayload {
    pir_detection?: boolean;
    presence_detection_options?: "both" | "mmwave" | "pir";
    motion_sensitivity?: "low" | "medium" | "high";
    ai_interference_source_selfidentification?: "ON" | "OFF";
    ai_sensitivity_adaptive?: "ON" | "OFF";
    absence_delay_timer?: number;
    pir_detection_interval?: number;
    detection_range?: number;
    detection_range_composite?: Record<string, boolean>;
    power_outage_count?: number;
}
/**
 * Set command for Aqara mmWave presence sensor.
 *
 * Extends `PresenceSetCommand` with FP300-specific writable configuration and
 * write-only commands like spatial learning and device restart.
 *
 * Supported devices:
 * - Aqara PS-S04D / FP300 (mmWave + PIR presence sensor)
 */
export interface AqaraPresenceSetCommand extends PresenceSetCommand {
    presence_detection_options?: "both" | "mmwave" | "pir";
    ai_interference_source_selfidentification?: "ON" | "OFF";
    ai_sensitivity_adaptive?: "ON" | "OFF";
    absence_delay_timer?: number;
    pir_detection_interval?: number;
    detection_range?: number;
    detection_range_composite?: Record<string, boolean>;
    spatial_learning?: "Start Learning";
    restart_device?: "Restart Device";
    identify?: "identify";
    track_target_distance?: "start_tracking_distance";
}
//# sourceMappingURL=aqara.d.ts.map