/**
 * Source Code first verified at https://etherscan.io on Wednesday, March 27, 2019
 (UTC) */

pragma solidity 0.4.25;


/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * See https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address _who) public view returns (uint256);
  function transfer(address _to, uint256 _value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}







/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {

  /**
  * @dev Multiplies two numbers, throws on overflow.
  */
  function mul(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
    // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (_a == 0) {
      return 0;
    }

    c = _a * _b;
    assert(c / _a == _b);
    return c;
  }

  /**
  * @dev Integer division of two numbers, truncating the quotient.
  */
  function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
    // assert(_b > 0); // Solidity automatically throws when dividing by 0
    // uint256 c = _a / _b;
    // assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
    return _a / _b;
  }

  /**
  * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
  */
  function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
    assert(_b <= _a);
    return _a - _b;
  }

  /**
  * @dev Adds two numbers, throws on overflow.
  */
  function add(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
    c = _a + _b;
    assert(c >= _a);
    return c;
  }
}



/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is ERC20Basic {
  using SafeMath for uint256;

  mapping(address => uint256) internal balances;

  uint256 internal totalSupply_;

  /**
  * @dev Total number of tokens in existence
  */
  function totalSupply() public view returns (uint256) {
    return totalSupply_;
  }

  /**
  * @dev Transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) public returns (bool) {
    require(_value <= balances[msg.sender]);
    require(_to != address(0));

    balances[msg.sender] = balances[msg.sender].sub(_value);
    balances[_to] = balances[_to].add(_value);
    emit Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of.
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) public view returns (uint256) {
    return balances[_owner];
  }

}









/**
 * @title Burnable Token
 * @dev Token that can be irreversibly burned (destroyed).
 */
contract BurnableToken is BasicToken {

  event Burn(address indexed burner, uint256 value);

  /**
   * @dev Burns a specific amount of tokens.
   * @param _value The amount of token to be burned.
   */
  function burn(uint256 _value) public {
    _burn(msg.sender, _value);
  }

  function _burn(address _who, uint256 _value) internal {
    require(_value <= balances[_who]);
    // no need to require value <= totalSupply, since that would imply the
    // sender's balance is greater than the totalSupply, which *should* be an assertion failure

    balances[_who] = balances[_who].sub(_value);
    totalSupply_ = totalSupply_.sub(_value);
    emit Burn(_who, _value);
    emit Transfer(_who, address(0), _value);
  }
}









/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
  function allowance(address _owner, address _spender)
    public view returns (uint256);

  function transferFrom(address _from, address _to, uint256 _value)
    public returns (bool);

  function approve(address _spender, uint256 _value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}



/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://github.com/ethereum/EIPs/issues/20
 * Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) internal allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(
    address _from,
    address _to,
    uint256 _value
  )
    public
    returns (bool)
  {
    require(_value <= balances[_from]);
    require(_value <= allowed[_from][msg.sender]);
    require(_to != address(0));

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    emit Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * Beware that changing an allowance with this method brings the risk that someone may use both the old
   * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
   * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) public returns (bool) {
    allowed[msg.sender][_spender] = _value;
    emit Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(
    address _owner,
    address _spender
   )
    public
    view
    returns (uint256)
  {
    return allowed[_owner][_spender];
  }

  /**
   * @dev Increase the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _addedValue The amount of tokens to increase the allowance by.
   */
  function increaseApproval(
    address _spender,
    uint256 _addedValue
  )
    public
    returns (bool)
  {
    allowed[msg.sender][_spender] = (
      allowed[msg.sender][_spender].add(_addedValue));
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  /**
   * @dev Decrease the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To decrement
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _subtractedValue The amount of tokens to decrease the allowance by.
   */
  function decreaseApproval(
    address _spender,
    uint256 _subtractedValue
  )
    public
    returns (bool)
  {
    uint256 oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue >= oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

}



/**
 * @title Standard Burnable Token
 * @dev Adds burnFrom method to ERC20 implementations
 */
contract StandardBurnableToken is BurnableToken, StandardToken {

  /**
   * @dev Burns a specific amount of tokens from the target address and decrements allowance
   * @param _from address The address which you want to send tokens from
   * @param _value uint256 The amount of token to be burned
   */
  function burnFrom(address _from, uint256 _value) public {
    require(_value <= allowed[_from][msg.sender]);
    // Should https://github.com/OpenZeppelin/zeppelin-solidity/issues/707 be accepted,
    // this function needs to emit an event with the updated approval.
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    _burn(_from, _value);
  }
}

/**
 * @title ValorToken
 */
contract ValorToken is StandardBurnableToken {

    string public constant name    =   "ValorToken";
    string public constant symbol  =   "VALOR";
    uint8  public constant decimals =   18;

    // initial supply addresses
    address public employeePool;
    address public futureDevFund;
    address public companyWallet;

    // initial supply and distribution of tokens
    uint256 internal constant VALOR = 10 ** uint256(decimals);
    uint256 public constant INITIAL_SUPPLY = 1e8 * VALOR; //100000000 VALOR.

    // required distribution is:
    // employeePool : 19%
    // futureDevFund: 26%
    // companyWallet: 55%
    uint256 internal constant employeePoolSupply =  1.9e7 * VALOR; // 19 000 000 VALOR
    uint256 internal constant futureDevFundSupply = 2.6e7 * VALOR; // 26 000 000 VALOR
    uint256 internal constant companyWalletSupply = 5.5e7 * VALOR; // 55 000 000 VALOR

    /**
     * @dev Constructor that distributes at TGS the supply among three predefined wallets 
     * @param _employeePool the account of employees pool funds
     * @param _futureDevFund the account of future development fund
     * @param _companyWallet the account of company managed cold wallet
     */
    constructor(address _employeePool, address _futureDevFund, address _companyWallet) public {
        require(_employeePool  != address(0),  "0x0 address is not allowed");
        require(_futureDevFund != address(0),  "0x0 address is not allowed");
        require(_companyWallet != address(0),  "0x0 address is not allowed");

        employeePool  = _employeePool;
        futureDevFund = _futureDevFund;
        companyWallet = _companyWallet;

        assert(INITIAL_SUPPLY == employeePoolSupply + futureDevFundSupply + companyWalletSupply);

        totalSupply_ = INITIAL_SUPPLY;

        // EmployeePool
        balances[employeePool] += employeePoolSupply;
        emit Transfer(address(0), employeePool, employeePoolSupply);

        // FutureDevFund
        balances[futureDevFund] += futureDevFundSupply;
        emit Transfer(address(0), futureDevFund, futureDevFundSupply);

        //CompanyWallet
        balances[companyWallet] += companyWalletSupply;
        emit Transfer(address(0), companyWallet, companyWalletSupply);
    }
}