/**
 * Source Code first verified at https://etherscan.io on Thursday, March 14, 2019
 (UTC) */

pragma solidity 0.4.25;
pragma experimental ABIEncoderV2;


/**
 * @title SafeMath
 * @dev Math operations with safety checks that revert on error
 */
library SafeMath {

  /**
  * @dev Multiplies two numbers, reverts on overflow.
  */
  function mul(uint256 _a, uint256 _b) internal pure returns (uint256) {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (_a == 0) {
      return 0;
    }

    uint256 c = _a * _b;
    require(c / _a == _b);

    return c;
  }

  /**
  * @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
  */
  function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
    require(_b > 0); // Solidity only automatically asserts when dividing by 0
    uint256 c = _a / _b;
    // assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold

    return c;
  }

  /**
  * @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
  */
  function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
    require(_b <= _a);
    uint256 c = _a - _b;

    return c;
  }

  /**
  * @dev Adds two numbers, reverts on overflow.
  */
  function add(uint256 _a, uint256 _b) internal pure returns (uint256) {
    uint256 c = _a + _b;
    require(c >= _a);

    return c;
  }

  /**
  * @dev Divides two numbers and returns the remainder (unsigned integer modulo),
  * reverts when dividing by zero.
  */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0);
    return a % b;
  }
}

/**
 * @title Math
 * @dev Assorted math operations
 */

library Math {
  function max(uint256 a, uint256 b) internal pure returns (uint256) {
    return a >= b ? a : b;
  }

  function min(uint256 a, uint256 b) internal pure returns (uint256) {
    return a < b ? a : b;
  }

  function average(uint256 a, uint256 b) internal pure returns (uint256) {
    // (a + b) / 2 can overflow, so we distribute
    return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
  }
}

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 {
  function totalSupply() public view returns (uint256);

  function balanceOf(address _who) public view returns (uint256);

  function allowance(address _owner, address _spender)
    public view returns (uint256);

  function transfer(address _to, uint256 _value) public returns (bool);

  function approve(address _spender, uint256 _value)
    public returns (bool);

  function transferFrom(address _from, address _to, uint256 _value)
    public returns (bool);

  function decimals() public view returns (uint256);

  event Transfer(
    address indexed from,
    address indexed to,
    uint256 value
  );

  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

/*
    Modified Util contract as used by Kyber Network
*/

library Utils {

    uint256 constant internal PRECISION = (10**18);
    uint256 constant internal MAX_QTY   = (10**28); // 10B tokens
    uint256 constant internal MAX_RATE  = (PRECISION * 10**6); // up to 1M tokens per ETH
    uint256 constant internal MAX_DECIMALS = 18;
    uint256 constant internal ETH_DECIMALS = 18;
    uint256 constant internal MAX_UINT = 2**256-1;

    // Currently constants can't be accessed from other contracts, so providing functions to do that here
    function precision() internal pure returns (uint256) { return PRECISION; }
    function max_qty() internal pure returns (uint256) { return MAX_QTY; }
    function max_rate() internal pure returns (uint256) { return MAX_RATE; }
    function max_decimals() internal pure returns (uint256) { return MAX_DECIMALS; }
    function eth_decimals() internal pure returns (uint256) { return ETH_DECIMALS; }
    function max_uint() internal pure returns (uint256) { return MAX_UINT; }

    /// @notice Retrieve the number of decimals used for a given ERC20 token
    /// @dev As decimals are an optional feature in ERC20, this contract uses `call` to
    /// ensure that an exception doesn't cause transaction failure
    /// @param token the token for which we should retrieve the decimals
    /// @return decimals the number of decimals in the given token
    function getDecimals(address token)
        internal
        view
        returns (uint256 decimals)
    {
        bytes4 functionSig = bytes4(keccak256("decimals()"));

        /// @dev Using assembly due to issues with current solidity `address.call()`
        /// implementation: https://github.com/ethereum/solidity/issues/2884
        assembly {
            // Pointer to next free memory slot
            let ptr := mload(0x40)
            // Store functionSig variable at ptr
            mstore(ptr,functionSig)
            let functionSigLength := 0x04
            let wordLength := 0x20

            let success := call(
                                5000, // Amount of gas
                                token, // Address to call
                                0, // ether to send
                                ptr, // ptr to input data
                                functionSigLength, // size of data
                                ptr, // where to store output data (overwrite input)
                                wordLength // size of output data (32 bytes)
                               )

            switch success
            case 0 {
                decimals := 0 // If the token doesn't implement `decimals()`, return 0 as default
            }
            case 1 {
                decimals := mload(ptr) // Set decimals to return data from call
            }
            mstore(0x40,add(ptr,0x04)) // Reset the free memory pointer to the next known free location
        }
    }

    /// @dev Checks that a given address has its token allowance and balance set above the given amount
    /// @param tokenOwner the address which should have custody of the token
    /// @param tokenAddress the address of the token to check
    /// @param tokenAmount the amount of the token which should be set
    /// @param addressToAllow the address which should be allowed to transfer the token
    /// @return bool true if the allowance and balance is set, false if not
    function tokenAllowanceAndBalanceSet(
        address tokenOwner,
        address tokenAddress,
        uint256 tokenAmount,
        address addressToAllow
    )
        internal
        view
        returns (bool)
    {
        return (
            ERC20(tokenAddress).allowance(tokenOwner, addressToAllow) >= tokenAmount &&
            ERC20(tokenAddress).balanceOf(tokenOwner) >= tokenAmount
        );
    }

    function calcDstQty(uint srcQty, uint srcDecimals, uint dstDecimals, uint rate) internal pure returns (uint) {
        if (dstDecimals >= srcDecimals) {
            require((dstDecimals - srcDecimals) <= MAX_DECIMALS);
            return (srcQty * rate * (10**(dstDecimals - srcDecimals))) / PRECISION;
        } else {
            require((srcDecimals - dstDecimals) <= MAX_DECIMALS);
            return (srcQty * rate) / (PRECISION * (10**(srcDecimals - dstDecimals)));
        }
    }

    function calcSrcQty(uint dstQty, uint srcDecimals, uint dstDecimals, uint rate) internal pure returns (uint) {

        //source quantity is rounded up. to avoid dest quantity being too low.
        uint numerator;
        uint denominator;
        if (srcDecimals >= dstDecimals) {
            require((srcDecimals - dstDecimals) <= MAX_DECIMALS);
            numerator = (PRECISION * dstQty * (10**(srcDecimals - dstDecimals)));
            denominator = rate;
        } else {
            require((dstDecimals - srcDecimals) <= MAX_DECIMALS);
            numerator = (PRECISION * dstQty);
            denominator = (rate * (10**(dstDecimals - srcDecimals)));
        }
        return (numerator + denominator - 1) / denominator; //avoid rounding down errors
    }

    function calcDestAmount(ERC20 src, ERC20 dest, uint srcAmount, uint rate) internal view returns (uint) {
        return calcDstQty(srcAmount, getDecimals(src), getDecimals(dest), rate);
    }

    function calcSrcAmount(ERC20 src, ERC20 dest, uint destAmount, uint rate) internal view returns (uint) {
        return calcSrcQty(destAmount, getDecimals(src), getDecimals(dest), rate);
    }

    function calcRateFromQty(uint srcAmount, uint destAmount, uint srcDecimals, uint dstDecimals)
        internal pure returns (uint)
    {
        require(srcAmount <= MAX_QTY);
        require(destAmount <= MAX_QTY);

        if (dstDecimals >= srcDecimals) {
            require((dstDecimals - srcDecimals) <= MAX_DECIMALS);
            return (destAmount * PRECISION / ((10 ** (dstDecimals - srcDecimals)) * srcAmount));
        } else {
            require((srcDecimals - dstDecimals) <= MAX_DECIMALS);
            return (destAmount * PRECISION * (10 ** (srcDecimals - dstDecimals)) / srcAmount);
        }
    }

    /// @notice Bringing this in from the Math library as we've run out of space in TotlePrimary (see EIP-170)
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
}

library ERC20SafeTransfer {
    function safeTransfer(address _tokenAddress, address _to, uint256 _value) internal returns (bool success) {

        require(_tokenAddress.call(bytes4(keccak256("transfer(address,uint256)")), _to, _value));

        return fetchReturnData();
    }

    function safeTransferFrom(address _tokenAddress, address _from, address _to, uint256 _value) internal returns (bool success) {

        require(_tokenAddress.call(bytes4(keccak256("transferFrom(address,address,uint256)")), _from, _to, _value));

        return fetchReturnData();
    }

    function safeApprove(address _tokenAddress, address _spender, uint256 _value) internal returns (bool success) {

        require(_tokenAddress.call(bytes4(keccak256("approve(address,uint256)")), _spender, _value));

        return fetchReturnData();
    }

    function fetchReturnData() internal returns (bool success){
        assembly {
            switch returndatasize()
            case 0 {
                success := 1
            }
            case 32 {
                returndatacopy(0, 0, 32)
                success := mload(0)
            }
            default {
                revert(0, 0)
            }
        }
    }

}

/// @title A contract which is used to check and set allowances of tokens
/// @dev In order to use this contract is must be inherited in the contract which is using
/// its functionality
contract AllowanceSetter {
    uint256 constant MAX_UINT = 2**256 - 1;

    /// @notice A function which allows the caller to approve the max amount of any given token
    /// @dev In order to function correctly, token allowances should not be set anywhere else in
    /// the inheriting contract
    /// @param addressToApprove the address which we want to approve to transfer the token
    /// @param token the token address which we want to call approve on
    function approveAddress(address addressToApprove, address token) internal {
        if(ERC20(token).allowance(address(this), addressToApprove) == 0) {
            require(ERC20SafeTransfer.safeApprove(token, addressToApprove, MAX_UINT));
        }
    }

}

contract ErrorReporter {
    function revertTx(string reason) public pure {
        revert(reason);
    }
}

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   * @notice Renouncing to ownership will leave the contract without an owner.
   * It will not be possible to call the functions with the `onlyOwner`
   * modifier anymore.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function transferOwnership(address _newOwner) public onlyOwner {
    _transferOwnership(_newOwner);
  }

  /**
   * @dev Transfers control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function _transferOwnership(address _newOwner) internal {
    require(_newOwner != address(0));
    emit OwnershipTransferred(owner, _newOwner);
    owner = _newOwner;
  }
}

/// @title A contract which can be used to ensure only the TotlePrimary contract can call
/// some functions
/// @dev Defines a modifier which should be used when only the totle contract should
/// able able to call a function
contract TotleControl is Ownable {
    mapping(address => bool) public authorizedPrimaries;

    /// @dev A modifier which only allows code execution if msg.sender equals totlePrimary address
    modifier onlyTotle() {
        require(authorizedPrimaries[msg.sender]);
        _;
    }

    /// @notice Contract constructor
    /// @dev As this contract inherits ownable, msg.sender will become the contract owner
    /// @param _totlePrimary the address of the contract to be set as totlePrimary
    constructor(address _totlePrimary) public {
        authorizedPrimaries[_totlePrimary] = true;
    }

    /// @notice A function which allows only the owner to change the address of totlePrimary
    /// @dev onlyOwner modifier only allows the contract owner to run the code
    /// @param _totlePrimary the address of the contract to be set as totlePrimary
    function addTotle(
        address _totlePrimary
    ) external onlyOwner {
        authorizedPrimaries[_totlePrimary] = true;
    }

    function removeTotle(
        address _totlePrimary
    ) external onlyOwner {
        authorizedPrimaries[_totlePrimary] = false;
    }
}

/// @title A contract which allows its owner to withdraw any ether which is contained inside
contract Withdrawable is Ownable {

    /// @notice Withdraw ether contained in this contract and send it back to owner
    /// @dev onlyOwner modifier only allows the contract owner to run the code
    /// @param _token The address of the token that the user wants to withdraw
    /// @param _amount The amount of tokens that the caller wants to withdraw
    /// @return bool value indicating whether the transfer was successful
    function withdrawToken(address _token, uint256 _amount) external onlyOwner returns (bool) {
        return ERC20SafeTransfer.safeTransfer(_token, owner, _amount);
    }

    /// @notice Withdraw ether contained in this contract and send it back to owner
    /// @dev onlyOwner modifier only allows the contract owner to run the code
    /// @param _amount The amount of ether that the caller wants to withdraw
    function withdrawETH(uint256 _amount) external onlyOwner {
        owner.transfer(_amount);
    }
}

/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
  event Paused();
  event Unpaused();

  bool private _paused = false;

  /**
   * @return true if the contract is paused, false otherwise.
   */
  function paused() public view returns (bool) {
    return _paused;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is not paused.
   */
  modifier whenNotPaused() {
    require(!_paused, "Contract is paused.");
    _;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is paused.
   */
  modifier whenPaused() {
    require(_paused, "Contract not paused.");
    _;
  }

  /**
   * @dev called by the owner to pause, triggers stopped state
   */
  function pause() public onlyOwner whenNotPaused {
    _paused = true;
    emit Paused();
  }

  /**
   * @dev called by the owner to unpause, returns to normal state
   */
  function unpause() public onlyOwner whenPaused {
    _paused = false;
    emit Unpaused();
  }
}

contract SelectorProvider {
    bytes4 constant getAmountToGiveSelector = bytes4(keccak256("getAmountToGive(bytes)"));
    bytes4 constant staticExchangeChecksSelector = bytes4(keccak256("staticExchangeChecks(bytes)"));
    bytes4 constant performBuyOrderSelector = bytes4(keccak256("performBuyOrder(bytes,uint256)"));
    bytes4 constant performSellOrderSelector = bytes4(keccak256("performSellOrder(bytes,uint256)"));

    function getSelector(bytes4 genericSelector) public pure returns (bytes4);
}

/// @title Interface for all exchange handler contracts
contract ExchangeHandler is SelectorProvider, TotleControl, Withdrawable, Pausable {

    /*
    *   State Variables
    */

    ErrorReporter public errorReporter;
    /* Logger public logger; */
    /*
    *   Modifiers
    */

    /// @notice Constructor
    /// @dev Calls the constructor of the inherited TotleControl
    /// @param totlePrimary the address of the totlePrimary contract
    constructor(
        address totlePrimary,
        address _errorReporter
        /* ,address _logger */
    )
        TotleControl(totlePrimary)
        public
    {
        require(_errorReporter != address(0x0));
        /* require(_logger != address(0x0)); */
        errorReporter = ErrorReporter(_errorReporter);
        /* logger = Logger(_logger); */
    }

    /// @notice Gets the amount that Totle needs to give for this order
    /// @param genericPayload the data for this order in a generic format
    /// @return amountToGive amount taker needs to give in order to fill the order
    function getAmountToGive(
        bytes genericPayload
    )
        public
        view
        returns (uint256 amountToGive)
    {
        bool success;
        bytes4 functionSelector = getSelector(this.getAmountToGive.selector);

        assembly {
            let functionSelectorLength := 0x04
            let functionSelectorOffset := 0x1C
            let scratchSpace := 0x0
            let wordLength := 0x20
            let bytesLength := mload(genericPayload)
            let totalLength := add(functionSelectorLength, bytesLength)
            let startOfNewData := add(genericPayload, functionSelectorOffset)

            mstore(add(scratchSpace, functionSelectorOffset), functionSelector)
            let functionSelectorCorrect := mload(scratchSpace)
            mstore(genericPayload, functionSelectorCorrect)

            success := delegatecall(
                            gas,
                            address, // This address of the current contract
                            startOfNewData, // Start data at the beginning of the functionSelector
                            totalLength, // Total length of all data, including functionSelector
                            scratchSpace, // Use the first word of memory (scratch space) to store our return variable.
                            wordLength // Length of return variable is one word
                           )
            amountToGive := mload(scratchSpace)
            if eq(success, 0) { revert(0, 0) }
        }
    }

    /// @notice Perform exchange-specific checks on the given order
    /// @dev this should be called to check for payload errors
    /// @param genericPayload the data for this order in a generic format
    /// @return checksPassed value representing pass or fail
    function staticExchangeChecks(
        bytes genericPayload
    )
        public
        view
        returns (bool checksPassed)
    {
        bool success;
        bytes4 functionSelector = getSelector(this.staticExchangeChecks.selector);
        assembly {
            let functionSelectorLength := 0x04
            let functionSelectorOffset := 0x1C
            let scratchSpace := 0x0
            let wordLength := 0x20
            let bytesLength := mload(genericPayload)
            let totalLength := add(functionSelectorLength, bytesLength)
            let startOfNewData := add(genericPayload, functionSelectorOffset)

            mstore(add(scratchSpace, functionSelectorOffset), functionSelector)
            let functionSelectorCorrect := mload(scratchSpace)
            mstore(genericPayload, functionSelectorCorrect)

            success := delegatecall(
                            gas,
                            address, // This address of the current contract
                            startOfNewData, // Start data at the beginning of the functionSelector
                            totalLength, // Total length of all data, including functionSelector
                            scratchSpace, // Use the first word of memory (scratch space) to store our return variable.
                            wordLength // Length of return variable is one word
                           )
            checksPassed := mload(scratchSpace)
            if eq(success, 0) { revert(0, 0) }
        }
    }

    /// @notice Perform a buy order at the exchange
    /// @param genericPayload the data for this order in a generic format
    /// @param  amountToGiveForOrder amount that should be spent on this order
    /// @return amountSpentOnOrder the amount that would be spent on the order
    /// @return amountReceivedFromOrder the amount that was received from this order
    function performBuyOrder(
        bytes genericPayload,
        uint256 amountToGiveForOrder
    )
        public
        payable
        returns (uint256 amountSpentOnOrder, uint256 amountReceivedFromOrder)
    {
        bool success;
        bytes4 functionSelector = getSelector(this.performBuyOrder.selector);
        assembly {
            let callDataOffset := 0x44
            let functionSelectorOffset := 0x1C
            let functionSelectorLength := 0x04
            let scratchSpace := 0x0
            let wordLength := 0x20
            let startOfFreeMemory := mload(0x40)

            calldatacopy(startOfFreeMemory, callDataOffset, calldatasize)

            let bytesLength := mload(startOfFreeMemory)
            let totalLength := add(add(functionSelectorLength, bytesLength), wordLength)

            mstore(add(scratchSpace, functionSelectorOffset), functionSelector)

            let functionSelectorCorrect := mload(scratchSpace)

            mstore(startOfFreeMemory, functionSelectorCorrect)

            mstore(add(startOfFreeMemory, add(wordLength, bytesLength)), amountToGiveForOrder)

            let startOfNewData := add(startOfFreeMemory,functionSelectorOffset)

            success := delegatecall(
                            gas,
                            address, // This address of the current contract
                            startOfNewData, // Start data at the beginning of the functionSelector
                            totalLength, // Total length of all data, including functionSelector
                            scratchSpace, // Use the first word of memory (scratch space) to store our return variable.
                            mul(wordLength, 0x02) // Length of return variables is two words
                          )
            amountSpentOnOrder := mload(scratchSpace)
            amountReceivedFromOrder := mload(add(scratchSpace, wordLength))
            if eq(success, 0) { revert(0, 0) }
        }
    }

    /// @notice Perform a sell order at the exchange
    /// @param genericPayload the data for this order in a generic format
    /// @param  amountToGiveForOrder amount that should be spent on this order
    /// @return amountSpentOnOrder the amount that would be spent on the order
    /// @return amountReceivedFromOrder the amount that was received from this order
    function performSellOrder(
        bytes genericPayload,
        uint256 amountToGiveForOrder
    )
        public
        returns (uint256 amountSpentOnOrder, uint256 amountReceivedFromOrder)
    {
        bool success;
        bytes4 functionSelector = getSelector(this.performSellOrder.selector);
        assembly {
            let callDataOffset := 0x44
            let functionSelectorOffset := 0x1C
            let functionSelectorLength := 0x04
            let scratchSpace := 0x0
            let wordLength := 0x20
            let startOfFreeMemory := mload(0x40)

            calldatacopy(startOfFreeMemory, callDataOffset, calldatasize)

            let bytesLength := mload(startOfFreeMemory)
            let totalLength := add(add(functionSelectorLength, bytesLength), wordLength)

            mstore(add(scratchSpace, functionSelectorOffset), functionSelector)

            let functionSelectorCorrect := mload(scratchSpace)

            mstore(startOfFreeMemory, functionSelectorCorrect)

            mstore(add(startOfFreeMemory, add(wordLength, bytesLength)), amountToGiveForOrder)

            let startOfNewData := add(startOfFreeMemory,functionSelectorOffset)

            success := delegatecall(
                            gas,
                            address, // This address of the current contract
                            startOfNewData, // Start data at the beginning of the functionSelector
                            totalLength, // Total length of all data, including functionSelector
                            scratchSpace, // Use the first word of memory (scratch space) to store our return variable.
                            mul(wordLength, 0x02) // Length of return variables is two words
                          )
            amountSpentOnOrder := mload(scratchSpace)
            amountReceivedFromOrder := mload(add(scratchSpace, wordLength))
            if eq(success, 0) { revert(0, 0) }
        }
    }
}

interface EtherDelta {
    function deposit() external payable;
    function withdraw(uint256 amount) external;
    function depositToken(address token, uint256 amount) external;
    function withdrawToken(address token, uint256 amount) external;
    function trade(address tokenGet, uint256 amountGet, address tokenGive, uint256 amountGive, uint256 expires, uint256 nonce, address user, uint8 v, bytes32 r, bytes32 s, uint256 amount) external;
    function availableVolume(address tokenGet, uint256 amountGet, address tokenGive, uint256 amountGive, uint256 expires, uint256 nonce, address user, uint8 v, bytes32 r, bytes32 s) external view returns (uint256);
}

/// @title EtherDeltaHandler
/// @notice Handles the all EtherDelta trades for the primary contract
contract EtherDeltaHandler is ExchangeHandler, AllowanceSetter {

    /*
    *   State Variables
    */

    EtherDelta public exchange;

    /*
    *   Types
    */

    struct OrderData {
        address user;
        address tokenGive;
        address tokenGet;
        uint256 amountGive;
        uint256 amountGet;
        uint256 expires;
        uint256 nonce;
        uint8 v;
        bytes32 r;
        bytes32 s;
        uint256 exchangeFee;
    }

    /// @notice Constructor
    /// @param _exchange Address of the EtherDelta exchange
    /// @param totlePrimary the address of the totlePrimary contract
    /// @param errorReporter the address of the error reporter contract
    constructor(
        address _exchange,
        address totlePrimary,
        address errorReporter
        /* ,address logger */
    )
        ExchangeHandler(totlePrimary, errorReporter/*, logger*/)
        public
    {
        require(_exchange != address(0x0));
        exchange = EtherDelta(_exchange);
    }

    /*
    *   Public functions
    */

    /// @notice Gets the amount that Totle needs to give for this order
    /// @dev Uses the `onlyTotle` modifier with public visibility as this function
    /// should only be called from functions which are inherited from the ExchangeHandler
    /// base contract
    /// @param data OrderData struct containing order values
    /// @return amountToGive amount taker needs to give in order to fill the order
    function getAmountToGive(
        OrderData data
    )
        public
        view
        onlyTotle
        returns (uint256 amountToGive)
    {
        uint256 availableVolume = exchange.availableVolume(
            data.tokenGet,
            data.amountGet,
            data.tokenGive,
            data.amountGive,
            data.expires,
            data.nonce,
            data.user,
            data.v,
            data.r,
            data.s
        );
        /* logger.log("Getting available volume from Etherdelta", availableVolume); */
        // Adds the exchange fee onto the available amount
        amountToGive = SafeMath.add(SafeMath.div(SafeMath.mul(availableVolume, data.exchangeFee), 1 ether), availableVolume);

        /* logger.log("Removing fee from amountToGive", amountToGive); */
    }

    /// @notice Perform exchange-specific checks on the given order
    /// @dev Uses the `onlyTotle` modifier with public visibility as this function
    /// should only be called from functions which are inherited from the ExchangeHandler
    /// base contract.
    /// This should be called to check for payload errors.
    /// @param data OrderData struct containing order values
    /// @return checksPassed value representing pass or fail
    function staticExchangeChecks(
        OrderData data
    )
        public
        view
        onlyTotle
        returns (bool checksPassed)
    {
        /* logger.log(block.number <= data.expires ? "Order isn't expired" : "Order is expired"); */
        // Only one thing to check here
        return block.number <= data.expires; // TODO - check if this is < or <=
    }

    /// @notice Perform a buy order at the exchange
    /// @dev Uses the `onlyTotle` modifier with public visibility as this function
    /// should only be called from functions which are inherited from the ExchangeHandler
    /// base contract
    /// @param data OrderData struct containing order values
    /// @param  amountToGiveForOrder amount that should be spent on this order
    /// @return amountSpentOnOrder the amount that would be spent on the order
    /// @return amountReceivedFromOrder the amount that was received from this order
    function performBuyOrder(
        OrderData data,
        uint256 amountToGiveForOrder
    )
        public
        payable
        onlyTotle
        returns (uint256 amountSpentOnOrder, uint256 amountReceivedFromOrder)
    {
        if (msg.value != amountToGiveForOrder) {
            errorReporter.revertTx("msg.value != amountToGiveForOrder");
        }
        /* logger.log("Depositing eth to Etherdelta arg2: amountToGive, arg3: ethBalance", amountToGiveForOrder, address(this).balance); */
        exchange.deposit.value(amountToGiveForOrder)();

        uint256 amountToTrade;
        uint256 fee;

        (amountToTrade, fee) = substractFee(data.exchangeFee, amountToGiveForOrder);
        /* logger.log("Removing fee from amountToGiveForOrder arg2: amountToGiveForOrder, arg3: amountToTrade, arg4: fee", amountToGiveForOrder, amountToTrade, fee); */
        trade(data, amountToTrade);

        amountSpentOnOrder = amountToGiveForOrder;
        amountReceivedFromOrder = getPartialAmount(data.amountGive, data.amountGet, amountToTrade);
        /* logger.log("Withdrawing tokens from EtherDelta arg2: amountReceivedFromOrder, arg3: amountSpentOnOrder", amountReceivedFromOrder, amountSpentOnOrder); */
        exchange.withdrawToken(data.tokenGive, amountReceivedFromOrder);

        if (!ERC20SafeTransfer.safeTransfer(data.tokenGive, msg.sender, amountReceivedFromOrder)) {
            errorReporter.revertTx("Unable to transfer bought tokens to primary");
        }
    }

    /// @notice Perform a sell order at the exchange
    /// @dev Uses the `onlyTotle` modifier with public visibility as this function
    /// should only be called from functions which are inherited from the ExchangeHandler
    /// base contract
    /// @param data OrderData struct containing order values
    /// @param  amountToGiveForOrder amount that should be spent on this order
    /// @return amountSpentOnOrder the amount that would be spent on the order
    /// @return amountReceivedFromOrder the amount that was received from this order
    function performSellOrder(
        OrderData data,
        uint256 amountToGiveForOrder
    )
        public
        onlyTotle
        returns (uint256 amountSpentOnOrder, uint256 amountReceivedFromOrder)
    {
        approveAddress(address(exchange), data.tokenGet);
        /* logger.log("Depositing tokens to EtherDelta arg2: amountToGiveForOrder", amountToGiveForOrder); */
        exchange.depositToken(data.tokenGet, amountToGiveForOrder);

        uint256 amountToTrade;
        uint256 fee;

        (amountToTrade, fee) = substractFee(data.exchangeFee, amountToGiveForOrder);
        /* logger.log("arg2: amountToTrade, arg3: fee", amountToTrade, fee); */

        trade(data, amountToTrade);

        amountSpentOnOrder = amountToGiveForOrder;
        amountReceivedFromOrder = getPartialAmount(data.amountGive, data.amountGet, amountToTrade);

        exchange.withdraw(amountReceivedFromOrder);
        /* logger.log("Withdrawing ether arg2: amountReceived", amountReceivedFromOrder); */
        msg.sender.transfer(amountReceivedFromOrder);
    }

    /*
    *   Internal functions
    */

    /// @notice Performs the trade at the exchange
    /// @dev It was necessary to separate this into a function due to limited stack space
    /// @param data OrderData struct containing order values
    /// @param amountToTrade amount that should be spent on this order
    function trade(
        OrderData data,
        uint256 amountToTrade
    )
        internal
    {
        exchange.trade(
            data.tokenGet,
            data.amountGet,
            data.tokenGive,
            data.amountGive,
            data.expires,
            data.nonce,
            data.user,
            data.v,
            data.r,
            data.s,
            amountToTrade
        );
    }

    /// @notice Subtract fee percentage from the amount give
    /// @param feePercentage the percentage fee to deduct
    /// @param  amount the amount that we should deduct from
    /// @return amountMinusFee the amount that would be spent on the order
    /// @return fee the amount that was received from this order
    function substractFee(
        uint256 feePercentage,
        uint256 amount
    )
        public
        pure
        returns (uint256 amountMinusFee, uint256 fee)
    {
        fee = SafeMath.sub(amount, getPartialAmount(amount, SafeMath.add(feePercentage, 1 ether), 1 ether ));
        amountMinusFee = SafeMath.sub(amount, fee);
    }

    /// @notice Calculate the result of ((numerator * target) / denominator)
    /// @param numerator the numerator in the equation
    /// @param denominator the denominator in the equation
    /// @param target the target for the equations
    /// @return partialAmount the resultant value
    function getPartialAmount(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256)
    {
        return SafeMath.div(SafeMath.mul(numerator, target), denominator);
    }

    function getSelector(bytes4 genericSelector) public pure returns (bytes4) {
        if (genericSelector == getAmountToGiveSelector) {
            return bytes4(keccak256("getAmountToGive((address,address,address,uint256,uint256,uint256,uint256,uint8,bytes32,bytes32,uint256))"));
        } else if (genericSelector == staticExchangeChecksSelector) {
            return bytes4(keccak256("staticExchangeChecks((address,address,address,uint256,uint256,uint256,uint256,uint8,bytes32,bytes32,uint256))"));
        } else if (genericSelector == performBuyOrderSelector) {
            return bytes4(keccak256("performBuyOrder((address,address,address,uint256,uint256,uint256,uint256,uint8,bytes32,bytes32,uint256),uint256)"));
        } else if (genericSelector == performSellOrderSelector) {
            return bytes4(keccak256("performSellOrder((address,address,address,uint256,uint256,uint256,uint256,uint8,bytes32,bytes32,uint256),uint256)"));
        } else {
            return bytes4(0x0);
        }
    }

    /*
    *   Payable fallback function
    */

    /// @notice payable fallback to allow the exchange to return ether directly to this contract
    /// @dev note that only the exchange should be able to send ether to this contract
    function() public payable {
        if (msg.sender != address(exchange)) {
            errorReporter.revertTx("An address other than the exchange cannot send ether to EDHandler fallback");
        }
    }
}