流程在安全模式下停止。
您可以修改流程並部署更改以重新啟動。
", "restartRequired": "Node-RED必須重新啟動，以啟用升級的模組", "credentials_load_failed": "流程由於無法解密證書而停止。
流程證書文件已加密，但是項目的加密密鑰丟失或無效。
", "credentials_load_failed_reset": "證書無法解密
流程證書文件已加密，但是項目的加密密鑰丟失或無效。
流程證書文件將在下一次部署時重置。任何現有的流程證書將被清除。
", "missing_flow_file": "找不到項目流程文件。
該項目未配置流程文件。
", "missing_package_file": "找不到項目包文件。
項目缺少package.json文件。
", "project_empty": "該項目為空。
是否要創建一組默認的項目文件？
否則，您將不得不在編輯器外部手動將文件添加到項目中。
找不到項目的'__project__'
", "git_merge_conflict": "自動合併更改失敗。
修復未合併的衝突，然後提交結果。
" }, "error": "Error: __message__", "errors": { "lostConnection": "丟失與伺服器的連接，重新連接...", "lostConnectionReconnect": "丟失與伺服器的連接，__time__ 秒後重新連接", "lostConnectionTry": "現在嘗試", "cannotAddSubflowToItself": "無法向其自身添加子流程", "cannotAddCircularReference": "無法添加子流程 - 迴圈引用", "unsupportedVersion": "您正在使用不受支持的Node.js版本加載'__module__'失敗
__error__
" }, "project": { "change-branch": "轉到本地分支'__project__'", "merge-abort": "Git合併中止", "loaded": "已加載項目'__project__'", "updated": "已更新項目'__project__'", "pull": "已重新加載項目'__project__'", "revert": "項目'__project__'已還原", "merge-complete": "Git合併完成", "setupCredentials": "設定證書", "setupProjectFiles": "設置項目文件", "no": "不了，謝謝", "createDefault": "創建默認項目文件", "mergeConflict": "顯示合併衝突" }, "label": { "manage-project-dep": "管理項目依賴性", "setup-cred": "設定憑證", "setup-project": "設置項目文件", "create-default-package": "創建默認的包文件", "no-thanks": "不了，謝謝", "create-default-project": "創建默認項目文件", "show-merge-conflicts": "顯示合併衝突", "unknownNodesButton": "搜索未知節點" } }, "clipboard": { "clipboard": "剪貼簿", "nodes": "節點", "node": "__count__ 節點", "node_plural": "__count__ 多個節點", "configNode": "__count__ 節點組態", "configNode_plural": "__count__ 多節點組態", "group": "__count__ 個組", "group_plural": "__count__ 個組", "flow": "__count__ 流程", "flow_plural": "__count__ 多流程", "subflow": "__count__ 子流程", "subflow_plural": "__count__ 多子流程", "replacedNodes": "__count__ 個節點被置換", "replacedNodes_plural": "__count__ 個節點被置換", "pasteNodes": "在這裡粘貼節點", "selectFile": "匯入所選檔案", "importNodes": "匯入節點", "exportNodes": "匯出節點至剪貼簿", "download": "下載", "importUnrecognised": "匯入了無法識別的類型:", "importUnrecognised_plural": "匯入了無法識別的類型:", "nodesExported": "節點匯出到了剪貼簿", "nodesImported": "已匯入:", "nodeCopied": "已複製 __count__ 個節點", "nodeCopied_plural": "已複製 __count__ 個節點", "groupCopied": "複製 __count__ 個組", "groupCopied_plural": "已複製 __count__ 個groups", "groupStyleCopied": "已複製組風格", "invalidFlow": "無效的流程: __message__", "recoveredNodes": "復原的節點", "recoveredNodesInfo": "導入節點時，此流上的節點缺少有效的流ID。它們已被添加到此流中，您可以復原或刪除它們。", "recoveredNodesNotification": "導入的節點缺少有效的流ID
已將它們添加到名為 '__flowName__'的新流中。
", "export": { "selected": "已選擇的節點", "current": "現在的節點", "all": "所有流程", "compact": "緊湊", "formatted": "已格式化", "copy": "匯出到剪貼簿", "export": "匯出到庫", "exportAs": "匯出為", "overwrite": "取代", "exists": "\"__file__\" 已經存在.
是否要取代?
" }, "import": { "import": "匯入到", "importSelected": "導入所選項", "importCopy": "導入副本", "viewNodes": "查看節點", "newFlow": "新流程", "replace": "置換", "errors": { "notArray": "輸入的不是JSON數組", "itemNotObject": "輸入的流程無效-項目 __index__ 不是節點對象", "missingId": "輸入的流程無效-項 __index__ 缺少“ id”屬性", "missingType": "輸入的流程無效-項 __index__ 缺少“類型”屬性" }, "conflictNotification1": "您要導入的某些節點已經存在於工作空間中。", "conflictNotification2": "選擇要導入的節點，並確認要替換現有的節點還是導入它們的副本" }, "copyMessagePath": "已複製路徑", "copyMessageValue": "已複製數值", "copyMessageValue_truncated": "已複製捨棄的數值" }, "deploy": { "deploy": "部署", "full": "全面", "fullDesc": "在工作區中部署所有內容", "modifiedFlows": "已修改的流程", "modifiedFlowsDesc": "只部署包含已更改節點的流程", "modifiedNodes": "已更改的節點", "modifiedNodesDesc": "只部署已經更改的節點", "restartFlows": "重新啟動流程", "restartFlowsDesc": "重新啟動當前部署的流程", "successfulDeploy": "部署成功", "successfulRestart": "成功重啟流程", "deployFailed": "部署失敗: __message__", "unusedConfigNodes": "您有一些未使用的配置節點", "unusedConfigNodesButton":"搜索未使用的配置節點", "unknownNodesButton":"搜索未知節點", "invalidNodesButton":"搜索無效節點", "errors": { "noResponse": "伺服器沒有回應" }, "confirm": { "button": { "ignore": "忽略", "confirm": "確認部署", "review": "查看更改", "cancel": "取消", "merge": "合併", "overwrite": "忽略 & 部署" }, "undeployedChanges": "您有未部署的更改。\n\n離開此頁面將丟失這些更改。", "improperlyConfigured": "工作區包含一些未正確配置的節點:", "unknown": "工作區包含一些未知的節點類型:", "confirm": "確定要部署嗎?", "doNotWarn": "不要再對此發出警告", "conflict": "伺服器正在運行較新的一組流程。", "backgroundUpdate": "伺服器上的流程已更新。", "conflictChecking": "檢查是否可以自動合併更改", "conflictAutoMerge": "此更改不包括衝突，可以自動合併", "conflictManualMerge": "這些更改包括了在部署之前必須解決的衝突。", "plusNMore": "+更多的 __count__" } }, "eventLog": { "title": "事件日誌", "view": "查看日誌" }, "diff": { "unresolvedCount": "__count__ 個未解決的衝突", "unresolvedCount_plural": "__count__ 個未解決的衝突", "globalNodes": "全局節點", "flowProperties": "流程屬性", "type": { "added": "已添加", "changed": "已更改", "unchanged": "未更改", "deleted": "已刪除", "flowDeleted": "已刪除流程", "flowAdded": "已添加流程", "movedTo": "移動至 __id__", "movedFrom": "從 __id__ 移動" }, "nodeCount": "__count__ 個節點", "nodeCount_plural": "__count__ 個節點", "local": "本地", "remote": "遠端", "reviewChanges": "查看變更", "noBinaryFileShowed": "無法顯示二進製文件內容", "viewCommitDiff": "查看提交更改", "compareChanges": "比較變更", "saveConflict": "保存衝突解決", "conflictHeader": "已解決__unresolved__中的__resolved__個衝突", "commonVersionError": "通用版本不包含有效的JSON：", "oldVersionError": "舊版本不包含有效的JSON：", "newVersionError": "新版本不包含有效的JSON：" }, "subflow": { "editSubflowInstance": "編輯子流程實例： __name__", "editSubflow": "編輯流程範本： __name__", "edit": "編輯流程範本", "subflowInstances": "這個子流程範本有 __count__ 個實例", "subflowInstances_plural": "這個子流程範本有 __count__ 個實例", "editSubflowProperties": "編輯屬性", "input": "輸入:", "output": "輸出:", "status": "狀態節點", "deleteSubflow": "刪除子流程", "info": "詳細描述", "category": "類別", "env": { "restore": "恢復為默認子流程", "remove": "類別刪除環境變量" }, "errors": { "noNodesSelected": "無法創建子流程: 未選擇節點", "multipleInputsToSelection": "無法創建子流程: 多個輸入到了選擇" } }, "group": { "editGroup": "編輯組： __name__", "errors": { "cannotCreateDiffGroups": "無法使用來自不同組的節點創建組", "cannotAddSubflowPorts": "無法將子流程的端口添加到組" } }, "editor": { "configEdit": "編輯", "configAdd": "添加", "configUpdate": "更新", "configDelete": "刪除", "nodesUse": "__count__ 個節點使用此配置", "nodesUse_plural": "__count__ 個節點使用此配置", "addNewConfig": "添加新的 __type__ 配置", "editNode": "編輯 __type__ 節點", "editConfig": "編輯 __type__ 配置", "addNewType": "添加新的 __type__ 節點", "nodeProperties": "節點屬性", "label": "Label", "color": "顏色", "portLabels": "埠標籤", "labelInputs": "輸入", "labelOutputs": "輸出", "settingIcon": "Icon", "default": "默認", "noDefaultLabel": "無", "defaultLabel": "使用默認標籤", "searchIcons": "搜尋圖標", "useDefault": "使用默認", "description": "描述", "show": "顯示", "hide": "隱藏", "locale": "選擇界面語言", "icon": "圖標", "inputType": "輸入類型", "selectType": "選擇類型...", "inputs": { "input": "輸入", "select": "選擇", "checkbox": "復選框", "spinner": "微調器", "none": "空", "hidden": "隱藏屬性" }, "types": { "str": "字符串", "num": "數字", "bool": "布爾", "json": "JSON", "bin": "buffer", "env": "環境變量", "cred": "證書" }, "menu": { "input": "輸入", "select": "選擇", "checkbox": "復選框", "spinner": "微調器", "hidden": "僅標簽" }, "select": { "label": "標簽", "value": "值" }, "spinner": { "min": "最小值", "max": "最大值" }, "errors": { "scopeChange": "更改範圍將使其他流程中的節點無法使用", "invalidProperties": "無效的屬性：" } }, "keyboard": { "title": "鍵盤快速鍵", "keyboard": "鍵盤", "filterActions": "篩選動作", "shortcut": "快捷鍵", "scope": "範圍", "unassigned": "未分配", "global": "全局", "workspace": "工作區", "selectAll": "選擇所有節點", "selectAllConnected": "選擇所有連接的節點", "addRemoveNode": "從選擇中添加/刪除節點", "editSelected": "編輯選定節點", "deleteSelected": "刪除選定節點或連結", "importNode": "匯入節點", "exportNode": "匯出節點", "nudgeNode": "移動所選節點(1px)", "moveNode": "移動所選節點(20px)", "toggleSidebar": "切換側邊欄", "togglePalette": "切換調色板", "copyNode": "複製所選節點", "cutNode": "剪切所選節點", "pasteNode": "粘貼節點", "undoChange": "撤銷上次執行的更改", "searchBox": "打開搜尋框", "managePalette": "管理面板", "actionList": "動作列表" }, "library": { "library": "庫", "openLibrary": "打開庫...", "saveToLibrary": "保存到庫...", "typeLibrary": "__type__ 型別程式庫", "unnamedType": "無名 __type__", "exportedToLibrary": "節點導出到庫", "dialogSaveOverwrite": "一個叫做 __libraryName__ 的 __libraryType__ 已經存在，您需要覆蓋麼？", "invalidFilename": "無效的檔案名", "savedNodes": "保存的節點", "savedType": "已保存 __type__", "saveFailed": "保存失敗: __message__", "newFolder": "新文件夾", "types": { "local": "本地", "examples": "例子" }, "exportToLibrary": "將節點匯出到庫" }, "palette": { "noInfo": "無可用資訊", "filter": "過濾節點", "search": "搜尋模組", "addCategory": "添加新的...", "label": { "subflows": "子流程", "network": "網絡", "common": "共通", "input": "輸入", "output": "輸出", "function": "功能", "sequence": "序列", "parser": "解析", "social": "社交", "storage": "存儲", "analysis": "分析", "advanced": "高級" }, "actions": { "collapse-all": "收起所有類別", "expand-all": "展開所有類別" }, "event": { "nodeAdded": "添加到面板中的節點:", "nodeAdded_plural": "添加到面板中的多個節點", "nodeRemoved": "從面板中刪除的節點:", "nodeRemoved_plural": "從面板中刪除的多個節點:", "nodeEnabled": "啟用節點:", "nodeEnabled_plural": "啟用多個節點:", "nodeDisabled": "禁用節點:", "nodeDisabled_plural": "禁用多個節點:", "nodeUpgraded": "節點模組__module__升級到__version__版本" }, "editor": { "title": "面板管理", "palette": "Palette", "times": { "seconds": "秒前", "minutes": "分前", "minutesV": "__count__ 分前", "hoursV": "__count__ 小時前", "hoursV_plural": "__count__ 小時前", "daysV": "__count__ 天前", "daysV_plural": "__count__ 天前", "weeksV": "__count__ 周前", "weeksV_plural": "__count__ 周前", "monthsV": "__count__ 月前", "monthsV_plural": "__count__ 月前", "yearsV": "__count__ 年前", "yearsV_plural": "__count__ 年前", "yearMonthsV": "__y__ 年, __count__ 月前", "yearMonthsV_plural": "__y__ 年, __count__ 月前", "yearsMonthsV": "__y__ 年, __count__ 月前", "yearsMonthsV_plural": "__y__ 年, __count__ 月前" }, "nodeCount": "__label__ 個節點", "nodeCount_plural": "__label__ 個節點", "moduleCount": "__count__ 個可用模組", "moduleCount_plural": "__count__ 個可用模組", "inuse": "使用中", "enableall": "全部啟用", "disableall": "全部禁用", "enable": "啟用", "disable": "禁用", "remove": "移除", "update": "更新至 __version__ 版本", "updated": "已更新", "install": "安裝", "installed": "已安裝", "conflict": "conflict", "conflictTip": "無法安裝此模塊，因為它包含已安裝的
節點類型
與__module__衝突
無法提取遠程更改；您未進行的暫存本地更改將被覆蓋。
提交更改，然後重試。
", "showUnstagedChanges": "顯示未分階段的更改", "connectionFailed": "無法連接到遠程存儲庫：", "pullUnrelatedHistory": "遠程服務器具有不相關的提交歷史記錄。
您確定要將更改保存到本地存儲庫中嗎？
", "pullChanges": "Pull變更", "history": "歷史", "projectHistory": "項目歷史", "daysAgo": "__count__ 天前", "daysAgo_plural": "__count__ 天前", "hoursAgo": "__count__ 小時前", "hoursAgo_plural": "__count__ 小時前", "minsAgo": "__count__ 分鐘前", "minsAgo_plural": "__count__ 分鐘前", "secondsAgo": "秒前", "notTracking": "您的本地分支當前未跟蹤遠程分支。", "statusUnmergedChanged": "您的存儲庫中有未合併的更改。您需要解決衝突並提交結果。", "repositoryUpToDate": "您的存儲庫是最新的。", "commitsAhead": "您的倉庫領先遠程倉庫 __count__ 次提交。您現在可以push這些提交。", "commitsAhead_plural": "您的倉庫領先遠程倉庫 __count__ 次提交。您現在可以push這些提交。", "commitsBehind": "您的倉庫落後遠程倉庫 __count__ 次提交。您現在可以pull這些提交。", "commitsBehind_plural": "您的倉庫落後遠程倉庫 __count__ 次提交。您現在可以pull這些提交。", "commitsAheadAndBehind1": "您的倉庫落後遠程倉庫 __count__ 次提交", "commitsAheadAndBehind1_plural": "您的倉庫落後遠程倉庫 __count__ 次提交", "commitsAheadAndBehind2": "領先遠程倉庫 __count__ 次提交。", "commitsAheadAndBehind2_plural": "領先遠程倉庫 __count__ 次提交。", "commitsAheadAndBehind3": "您必須先pull遠程提交，然後再進行push。", "commitsAheadAndBehind3_plural": "您必須先pull遠程提交，然後再進行push。", "refreshCommitHistory": "刷新提交歷史", "refreshChanges": "刷新更改" } } }, "typedInput": { "type": { "str": "文字列", "num": "數字", "re": "規則運算式", "bool": "布林", "json": "JSON", "bin": "二進位流", "date": "時間戳記", "jsonata": "expression", "env": "env variable", "cred": "證書" } }, "editableList": { "add": "添加" }, "search": { "empty": "找不到匹配", "addNode": "添加一個節點...", "options": { "configNodes": "配置節點", "unusedConfigNodes": "未使用的配置節點", "invalidNodes": "無效的節點", "uknownNodes": "未知的節點", "unusedSubflows": "未使用的子流程" } }, "expressionEditor": { "functions": "功能", "functionReference": "Function reference", "insert": "插入", "title": "JSONata運算式編輯器", "test": "Test", "data": "示例消息", "result": "結果", "format": "格式表達方法", "compatMode": "相容模式啟用", "compatModeDesc": " 目前的運算式仍然參考msg，所以將以相容性模式進行評估。請更新運算式，使其不使用msg，因為此模式將在將來刪除。
當JSONata支持首次添加到Node-RED時，它需要運算式引用msg物件。例如msg.payload將用於訪問有效負載。
這樣便不再需要運算式直接針對消息進行評估。要訪問有效負載，運算式應該只是payload.
緩衝區類型被存儲為位元組值的JSON陣列。編輯器將嘗試將輸入的數值解析為JSON陣列。如果它不是有效的JSON，它將被視為UTF-8字串，並被轉換為單個字元代碼點的陣列。
例如，Hello World的值會被轉換為JSON陣列：
[72, 101, 108, 108, 111, 32, 87, 111, 114, 108, 100]" }, "projects": { "config-git": "配置Git客戶端", "welcome": { "hello": "你好！ 我們已經將“項目”引入了Node-RED。", "desc0": "這是一種用於管理流程文件的新方法，並且包括對流程的版本控制。", "desc1": "首先，您可以創建您的第一個項目或從git存儲庫克隆現有項目。", "desc2": "如果不確定，可以暫時跳過此步驟。 您仍然可以隨時通過“項目”菜單創建第一個項目。", "create": "創建項目", "clone": "克隆存儲庫", "openExistingProject": "打開現有項目", "not-right-now": "不是現在" }, "git-config": { "setup": "設置您的版本控制客戶端", "desc0": "Node-RED使用開源工具Git進行版本控制。 它跟蹤對項目文件的更改，並允許您將其推送到遠程存儲庫。", "desc1": "提交一組更改時，Git會使用用戶名和電子郵件地址記錄誰進行了更改。 用戶名可以是您想要的任何名稱-不必是您的真實姓名。", "desc2": "您的Git客戶端已經配置了以下詳細信息。", "desc3": "您可以稍後在設置對話框的“ Git config”標籤下更改這些設置。", "username": "用戶名", "email": "電子郵件" }, "project-details": { "create": "創建您的項目", "desc0": "項目被維護為Git存儲庫。 與他人共享您的流程並進行協作更容易。", "desc1": "您可以創建多個項目，並通過編輯器在它們之間快速切換。", "desc2": "首先，您的項目需要一個名稱和一個可選的描述。", "already-exists": "項目已存在", "must-contain": "必須僅包含A-Z 0-9 _ -", "project-name": "項目名", "desc": "描述", "opt": "可選的" }, "clone-project": { "clone": "克隆項目", "desc0": "如果您已經有一個包含項目的git存儲庫，則可以對其進行克隆以開始使用。", "already-exists": "項目已經存在", "must-contain": "必須僅包含A-Z 0-9 _ -", "project-name": "項目名", "no-info-in-url": "網址中不要包含用戶名/密碼", "git-url": "Git存儲庫URL", "protocols": "https://, ssh:// or file://", "auth-failed": "驗證失敗", "username": "用戶名", "passwd": "密碼", "ssh-key": "SSH密鑰", "passphrase": "密碼短語", "ssh-key-desc": "在通過ssh克隆存儲庫之前，必須添加SSH密鑰才能訪問它。", "ssh-key-add": "添加一個ssh密鑰", "credential-key": "證書加密密鑰", "cant-get-ssh-key": "錯誤！ 無法獲取所選的SSH密鑰路徑。", "already-exists2": "已存在", "git-error": "git錯誤", "connection-failed": "連接失敗", "not-git-repo": "不是一個git倉庫", "repo-not-found": "未發現倉庫" }, "default-files": { "create": "創建您的項目文件", "desc0": "一個項目包含您的流程文件，自述文件和package.json文件。", "desc1": "它可以包含您要在Git存儲庫中維護的任何其他文件。", "desc2": "您現有的流程和證書文件將被複製到項目中。", "flow-file": "流文件", "credentials-file": "證書文件" }, "encryption-config": { "setup": "設置證書文件的加密", "desc0": "您的流程證書文件可以被加密以確保其內容安全。", "desc1": "如果要將這些證書存儲在公共Git存儲庫中，則必須通過提供密鑰短語來對它們進行加密。", "desc2": "您的流程證書文件當前未加密。", "desc3": "這意味著任何有權訪問該文件的人都可以讀取其內容，例如密碼和訪問令牌。", "desc4": "如果要將這些證書存儲在公共Git存儲庫中，則必須通過提供密鑰短語來對它們進行加密。", "desc5": "當前，使用設置文件中的credentialSecret屬性作為密鑰來加密流憑據文件。", "desc6": "您的流程證書文件當前使用系統生成的密鑰加密。 您應該為此項目提供一個新的密鑰。", "desc7": "密鑰將與項目文件分開存儲。 您將需要提供在另一個Node-RED實例中使用該項目的密鑰。", "credentials": "證書", "enable": "啟用加密", "disable": "禁用加密", "disabled": "禁用的", "copy": "複製現有密鑰", "use-custom": "使用自定義密鑰", "desc8": "憑證文件不會被加密，其內容很容易閱讀", "create-project-files": "創建項目文件", "create-project": "創建項目", "already-exists": "已存在", "git-error": "git錯誤", "git-auth-error": "git認證錯誤" }, "create-success": { "success": "您已經成功創建了第一個項目！", "desc0": "現在，您可以像往常一樣繼續使用Node-RED。", "desc1": "側欄中的“信息”標籤顯示了您當前的活動項目。名稱旁邊的按鈕可用於訪問項目設置視圖。", "desc2": "側欄中的“歷史記錄”標籤可用於查看項目中已更改的文件並提交。 它向您顯示了提交的完整歷史記錄，並允許您將更改推送到遠程存儲庫。" }, "create": { "projects": "項目", "already-exists": "項目已存在", "must-contain": "必須僅包含A-Z 0-9 _ -", "no-info-in-url": "網址中不要包含用戶名/密碼", "open": "打開項目", "create": "創建項目", "clone": "克隆倉庫", "project-name": "項目名", "desc": "描述", "opt": "可選的", "flow-file": "流程文件", "credentials": "證書", "enable-encryption": "啟用加密", "disable-encryption": "禁用加密", "encryption-key": "加密的密鑰", "desc0": "用來保護您的憑證的短語", "desc1": "憑證文件不會被加密，其內容很容易閱讀", "git-url": "Git倉庫的URL", "protocols": "https://, ssh:// or file://", "auth-failed": "驗證失敗", "username": "用戶名", "password": "密碼", "ssh-key": "SSH密鑰", "passphrase": "密碼短語", "desc2": "在通過ssh克隆存儲庫之前，必須添加SSH密鑰才能訪問它。", "add-ssh-key": "添加一個ssh密鑰", "credentials-encryption-key": "憑證加密密鑰", "already-exists-2": "已存在", "git-error": "git錯誤", "con-failed": "連接失敗", "not-git": "不是git倉庫", "no-resource": "找不到存儲庫", "cant-get-ssh-key-path": "錯誤！ 無法獲取所選的SSH密鑰路徑。", "unexpected_error": "意外的錯誤" }, "delete": { "confirm": "您確定要刪除此項目嗎？" }, "create-project-list": { "search": "搜尋您的項目", "current": "當前的" }, "require-clean": { "confirm": "
您有未部署的更改，這些更改將丟失。
您要繼續嗎？
" }, "send-req": { "auth-req": "存儲庫需要認證", "username": "用戶名", "password": "密碼", "passphrase": "密碼短語", "retry": "重試", "update-failed": "無法更新身份驗證", "unhandled": "未處理的錯誤響應", "host-key-verify-failed": "主機密鑰驗證失敗。
無法驗證存儲庫主機密鑰。請更新您的known_hosts文件，然後重試。