/* * MUSCLE SmartCard Development ( http://www.linuxnet.com ) * * Copyright (C) 1999 * David Corcoran * Copyright (C) 2002-2011 * Ludovic Rousseau * * $Id: wintypes.h 5714 2011-05-05 09:26:47Z rousseau $ */ /** * @file * @brief This keeps a list of Windows(R) types. */ #ifndef __wintypes_h__ #define __wintypes_h__ #ifdef __cplusplus extern "C" { #endif #ifdef __APPLE__ #include #ifndef BYTE typedef uint8_t BYTE; #endif typedef uint8_t UCHAR; typedef uint8_t *PUCHAR; typedef uint16_t USHORT; #ifndef __COREFOUNDATION_CFPLUGINCOM__ typedef uint32_t ULONG; typedef void *LPVOID; #endif typedef uint32_t *PULONG; typedef const void *LPCVOID; typedef uint32_t DWORD; typedef uint32_t *PDWORD; typedef uint16_t WORD; typedef int32_t LONG; typedef const char *LPCSTR; typedef const BYTE *LPCBYTE; typedef BYTE *LPBYTE; typedef DWORD *LPDWORD; typedef char *LPSTR; #else #ifndef BYTE typedef unsigned char BYTE; #endif typedef unsigned char UCHAR; typedef unsigned char *PUCHAR; typedef unsigned short USHORT; #ifndef __COREFOUNDATION_CFPLUGINCOM__ typedef unsigned long ULONG; typedef void *LPVOID; #endif typedef const void *LPCVOID; typedef unsigned long DWORD; typedef unsigned long *PDWORD; typedef long LONG; typedef const char *LPCSTR; typedef const BYTE *LPCBYTE; typedef BYTE *LPBYTE; typedef DWORD *LPDWORD; typedef char *LPSTR; /* these types were deprecated but still used by old drivers and * applications. So just declare and use them. */ typedef LPSTR LPTSTR; typedef LPCSTR LPCTSTR; /* types unused by pcsc-lite */ typedef short BOOL; typedef unsigned short WORD; typedef unsigned long *PULONG; #endif ///////////////////////////////////////// #define SCARD_PCI_T0 (&g_rgSCardT0Pci) /**< protocol control information (PCI) for T=0 */ #define SCARD_PCI_T1 (&g_rgSCardT1Pci) /**< protocol control information (PCI) for T=1 */ #define SCARD_PCI_RAW (&g_rgSCardRawPci) /**< protocol control information (PCI) for RAW protocol */ /** error codes from http://msdn.microsoft.com/en-us/library/aa924526.aspx */ #define SCARD_S_SUCCESS 0x00000000 /**< No error was encountered. */ #define SCARD_F_INTERNAL_ERROR 0x80100001 /**< An internal consistency check failed. */ #define SCARD_S_SUCCESS 0x00000000 #define SCARD_E_CANCELLED 0x80100002 /**< The action was cancelled by an SCardCancel request. */ #define SCARD_E_INVALID_HANDLE 0x80100003 /**< The supplied handle was invalid. */ #define SCARD_E_INVALID_PARAMETER 0x80100004 /**< One or more of the supplied parameters could not be properly interpreted. */ #define SCARD_E_INVALID_TARGET 0x80100005 /**< Registry startup information is missing or invalid. */ #define SCARD_E_NO_MEMORY 0x80100006 /**< Not enough memory available to complete this command. */ #define SCARD_F_WAITED_TOO_LONG 0x80100007 /**< An internal consistency timer has expired. */ #define SCARD_E_INSUFFICIENT_BUFFER 0x80100008 /**< The data buffer to receive returned data is too small for the returned data. */ #define SCARD_E_UNKNOWN_READER 0x80100009 /**< The specified reader name is not recognized. */ #define SCARD_E_TIMEOUT 0x8010000A /**< The user-specified timeout value has expired. */ #define SCARD_E_SHARING_VIOLATION 0x8010000B /**< The smart card cannot be accessed because of other connections outstanding. */ #define SCARD_E_NO_SMARTCARD 0x8010000C /**< The operation requires a Smart Card, but no Smart Card is currently in the device. */ #define SCARD_E_UNKNOWN_CARD 0x8010000D /**< The specified smart card name is not recognized. */ #define SCARD_E_CANT_DISPOSE 0x8010000E /**< The system could not dispose of the media in the requested manner. */ #define SCARD_E_PROTO_MISMATCH 0x8010000F /**< The requested protocols are incompatible with the protocol currently in use with the smart card. */ #define SCARD_E_NOT_READY 0x80100010 /**< The reader or smart card is not ready to accept commands. */ #define SCARD_E_INVALID_VALUE 0x80100011 /**< One or more of the supplied parameters values could not be properly interpreted. */ #define SCARD_E_SYSTEM_CANCELLED 0x80100012 /**< The action was cancelled by the system, presumably to log off or shut down. */ #define SCARD_F_COMM_ERROR 0x80100013 /**< An internal communications error has been detected. */ #define SCARD_F_UNKNOWN_ERROR 0x80100014 /**< An internal error has been detected, but the source is unknown. */ #define SCARD_E_INVALID_ATR 0x80100015 /**< An ATR obtained from the registry is not a valid ATR string. */ #define SCARD_E_NOT_TRANSACTED 0x80100016 /**< An attempt was made to end a non-existent transaction. */ #define SCARD_E_READER_UNAVAILABLE 0x80100017 /**< The specified reader is not currently available for use. */ #define SCARD_P_SHUTDOWN 0x80100018 /**< The operation has been aborted to allow the server application to exit. */ #define SCARD_E_PCI_TOO_SMALL 0x80100019 /**< The PCI Receive buffer was too small. */ #define SCARD_E_READER_UNSUPPORTED 0x8010001A /**< The reader driver does not meet minimal requirements for support. */ #define SCARD_E_DUPLICATE_READER 0x8010001B /**< The reader driver did not produce a unique reader name. */ #define SCARD_E_CARD_UNSUPPORTED 0x8010001C /**< The smart card does not meet minimal requirements for support. */ #define SCARD_E_NO_SERVICE 0x8010001D /**< The Smart card resource manager is not running. */ #define SCARD_E_SERVICE_STOPPED 0x8010001E /**< The Smart card resource manager has shut down. */ #define SCARD_E_UNEXPECTED 0x8010001F /**< An unexpected card error has occurred. */ #define SCARD_E_UNSUPPORTED_FEATURE 0x8010001F /**< This smart card does not support the requested feature. */ #define SCARD_E_ICC_INSTALLATION 0x80100020 /**< No primary provider can be found for the smart card. */ #define SCARD_E_ICC_CREATEORDER 0x80100021 /**< The requested order of object creation is not supported. */ /* #define SCARD_E_UNSUPPORTED_FEATURE 0x80100022) / **< This smart card does not support the requested feature. */ #define SCARD_E_DIR_NOT_FOUND 0x80100023 /**< The identified directory does not exist in the smart card. */ #define SCARD_E_FILE_NOT_FOUND 0x80100024 /**< The identified file does not exist in the smart card. */ #define SCARD_E_NO_DIR 0x80100025 /**< The supplied path does not represent a smart card directory. */ #define SCARD_E_NO_FILE 0x80100026 /**< The supplied path does not represent a smart card file. */ #define SCARD_E_NO_ACCESS 0x80100027 /**< Access is denied to this file. */ #define SCARD_E_WRITE_TOO_MANY 0x80100028 /**< The smart card does not have enough memory to store the information. */ #define SCARD_E_BAD_SEEK 0x80100029 /**< There was an error trying to set the smart card file object pointer. */ #define SCARD_E_INVALID_CHV 0x8010002A /**< The supplied PIN is incorrect. */ #define SCARD_E_UNKNOWN_RES_MNG 0x8010002B /**< An unrecognized error code was returned from a layered component. */ #define SCARD_E_NO_SUCH_CERTIFICATE 0x8010002C /**< The requested certificate does not exist. */ #define SCARD_E_CERTIFICATE_UNAVAILABLE 0x8010002D /**< The requested certificate could not be obtained. */ #define SCARD_E_NO_READERS_AVAILABLE 0x8010002E /**< Cannot find a smart card reader. */ #define SCARD_E_COMM_DATA_LOST 0x8010002F /**< A communications error with the smart card has been detected. Retry the operation. */ #define SCARD_E_NO_KEY_CONTAINER 0x80100030 /**< The requested key container does not exist on the smart card. */ #define SCARD_E_SERVER_TOO_BUSY 0x80100031 /**< The Smart Card Resource Manager is too busy to complete this operation. */ #define SCARD_W_UNSUPPORTED_CARD 0x80100065 /**< The reader cannot communicate with the card, due to ATR string configuration conflicts. */ #define SCARD_W_UNRESPONSIVE_CARD 0x80100066 /**< The smart card is not responding to a reset. */ #define SCARD_W_UNPOWERED_CARD 0x80100067 /**< Power has been removed from the smart card, so that further communication is not possible. */ #define SCARD_W_RESET_CARD 0x80100068 /**< The smart card has been reset, so any shared state information is invalid. */ #define SCARD_W_REMOVED_CARD 0x80100069 /**< The smart card has been removed, so further communication is not possible. */ #define SCARD_W_SECURITY_VIOLATION 0x8010006A /**< Access was denied because of a security violation. */ #define SCARD_W_WRONG_CHV 0x8010006B /**< The card cannot be accessed because the wrong PIN was presented. */ #define SCARD_W_CHV_BLOCKED 0x8010006C /**< The card cannot be accessed because the maximum number of PIN entry attempts has been reached. */ #define SCARD_W_EOF 0x8010006D /**< The end of the smart card file has been reached. */ #define SCARD_W_CANCELLED_BY_USER 0x8010006E /**< The user pressed "Cancel" on a Smart Card Selection Dialog. */ #define SCARD_W_CARD_NOT_AUTHENTICATED 0x8010006F /**< No PIN was presented to the smart card. */ #define SCARD_AUTOALLOCATE (DWORD)(-1) /**< see SCardFreeMemory() */ #define SCARD_SCOPE_USER 0x0000 /**< Scope in user space */ #define SCARD_SCOPE_TERMINAL 0x0001 /**< Scope in terminal */ #define SCARD_SCOPE_SYSTEM 0x0002 /**< Scope in system */ #define SCARD_PROTOCOL_UNDEFINED 0x0000 /**< protocol not set */ #define SCARD_PROTOCOL_UNSET SCARD_PROTOCOL_UNDEFINED /* backward compat */ #define SCARD_PROTOCOL_T0 0x0001 /**< T=0 active protocol. */ #define SCARD_PROTOCOL_T1 0x0002 /**< T=1 active protocol. */ #define SCARD_PROTOCOL_RAW 0x0004 /**< Raw active protocol. */ #define SCARD_PROTOCOL_T15 0x0008 /**< T=15 protocol. */ #define SCARD_PROTOCOL_ANY (SCARD_PROTOCOL_T0|SCARD_PROTOCOL_T1) /**< IFD determines prot. */ #define SCARD_SHARE_EXCLUSIVE 0x0001 /**< Exclusive mode only */ #define SCARD_SHARE_SHARED 0x0002 /**< Shared mode only */ #define SCARD_SHARE_DIRECT 0x0003 /**< Raw mode only */ #define SCARD_LEAVE_CARD 0x0000 /**< Do nothing on close */ #define SCARD_RESET_CARD 0x0001 /**< Reset on close */ #define SCARD_UNPOWER_CARD 0x0002 /**< Power down on close */ #define SCARD_EJECT_CARD 0x0003 /**< Eject on close */ #define SCARD_UNKNOWN 0x0001 /**< Unknown state */ #define SCARD_ABSENT 0x0002 /**< Card is absent */ #define SCARD_PRESENT 0x0004 /**< Card is present */ #define SCARD_SWALLOWED 0x0008 /**< Card not powered */ #define SCARD_POWERED 0x0010 /**< Card is powered */ #define SCARD_NEGOTIABLE 0x0020 /**< Ready for PTS */ #define SCARD_SPECIFIC 0x0040 /**< PTS has been set */ #define SCARD_STATE_UNAWARE 0x0000 /**< App wants status */ #define SCARD_STATE_IGNORE 0x0001 /**< Ignore this reader */ #define SCARD_STATE_CHANGED 0x0002 /**< State has changed */ #define SCARD_STATE_UNKNOWN 0x0004 /**< Reader unknown */ #define SCARD_STATE_UNAVAILABLE 0x0008 /**< Status unavailable */ #define SCARD_STATE_EMPTY 0x0010 /**< Card removed */ #define SCARD_STATE_PRESENT 0x0020 /**< Card inserted */ #define SCARD_STATE_ATRMATCH 0x0040 /**< ATR matches card */ #define SCARD_STATE_EXCLUSIVE 0x0080 /**< Exclusive Mode */ #define SCARD_STATE_INUSE 0x0100 /**< Shared Mode */ #define SCARD_STATE_MUTE 0x0200 /**< Unresponsive card */ #define SCARD_STATE_UNPOWERED 0x0400 /**< Unpowered card */ #define MAXIMUM_SMARTCARD_READERS 10 #ifndef INFINITE #define INFINITE 0xFFFFFFFF /**< Infinite timeout */ #endif #define PCSCLITE_VERSION_NUMBER "1.7.4" /**< Current version */ /** Maximum readers context (a slot is count as a reader) */ #define PCSCLITE_MAX_READERS_CONTEXTS 16 #define PCSCLITE_STATUS_WAIT 10000 #define MAX_READERNAME 100 #ifndef SCARD_ATR_LENGTH #define SCARD_ATR_LENGTH MAX_ATR_SIZE /**< Maximum ATR size */ #endif /* * The message and buffer sizes must be multiples of 16. * The max message size must be at least large enough * to accomodate the transmit_struct */ #define MAX_BUFFER_SIZE 264 /**< Maximum Tx/Rx Buffer for short APDU */ #define MAX_BUFFER_SIZE_EXTENDED (4 + 3 + (1<<16) + 3) /**< enhanced (64K + APDU + Lc + Le) Tx/Rx Buffer */ #ifdef __cplusplus } #endif #endif