export declare enum MessagePriority {
    /** No vibration or sound. The notification will be under the fold in "Other notifications". */
    MIN = 1,
    /** No vibration or sound. Notification will not visibly show up until notification drawer is pulled down. */
    LOW = 2,
    /** Short default vibration and sound. Default notification behavior. */
    DEFAULT = 3,
    /** Long vibration burst, default notification sound with a pop-over notification. */
    HIGH = 4,
    /** Really long vibration bursts, default notification sound with a pop-over notification. */
    MAX = 5
}
export type Action = ({
    type: 'broadcast';
} & BroadcastAction) | ({
    type: 'http';
} & HTTPAction) | ({
    type: 'view';
} & ViewAction);
export type AttachmentConfig = {
    /**
     * You can send images and other files to your phone as attachments to a notification. The attachments are then
     * downloaded onto your phone (depending on size and setting automatically), and can be used from the Downloads
     * folder.
     *
     * There are two different ways to send attachments:
     *
     * * sending a local file, e.g. from `~/Flowers/flower.jpg` or `ringtone.mp3`
     * * or by passing an external URL as an attachment, e.g. `https://f-droid.org/F-Droid.apk`
     */
    fileAttachment: string;
} & Omit<BaseConfig, 'fileURL'>;
export interface BaseConfig {
    /**
     * You can add action buttons to notifications to allow yourself to react to a notification directly. This is
     * incredibly useful and has countless applications.
     *
     * You can control your home appliances (open/close garage door, change temperature on thermostat, ...), react to
     * common monitoring alerts (clear logs when disk is full, ...), and many other things. The sky is the limit.
     *
     * As of today, the following actions are supported:
     *
     * * [`view`](https://docs.ntfy.sh/publish/#open-websiteapp): Opens a website or app when the action button is tapped
     * * [`broadcast`](https://docs.ntfy.sh/publish/#send-android-broadcast): Sends an
     * [Android broadcast](https://developer.android.com/guide/components/broadcasts) intent when the action button is
     * tapped (only supported on Android)
     * * [`http`](https://docs.ntfy.sh/publish/#send-http-request): Sends HTTP POST/GET/PUT request when the action button
     * is tapped
     */
    actions?: Action[];
    /**
     * Depending on whether the server is configured to support
     * [access control](https://docs.ntfy.sh/config/#access-control), some topics may be read/write protected so that only
     * users with the correct credentials can subscribe or publish to them.
     *
     * Use either basic credentials or an access token.
     */
    authorization?: {
        password: string;
        username: string;
    } | string;
    /**
     * You can define which URL to open when a notification is clicked. This may be useful if your notification is related
     * to a Zabbix alert or a transaction that you'd like to provide the deep-link for. Tapping the notification will open
     * the web browser (or the app) and open the website.
     *
     * If you pass a website URL (`http://` or `https://`) the web browser will open. If you pass another URI that can be
     * handled by another app, the responsible app may open.
     *
     * Examples:
     *
     * * `http://` or `https://` will open your browser (or an app if it registered for a URL)
     * * `mailto:` links will open your mail app, e.g. `mailto:phil@example.com`
     * * `geo:` links will open Google Maps, e.g. `geo:0,0?q=1600+Amphitheatre+Parkway,+Mountain+View,+CA`
     * * `ntfy://` links will open ntfy (see [ntfy:// links](https://docs.ntfy.sh/subscribe/phone/#ntfy-links)), e.g.
     * `ntfy://ntfy.sh/stats`
     * * `twitter://` links will open Twitter, e.g. `twitter://user?screen_name=..`
     * * ...
  
    */
    clickURL?: string;
    /**
     * You can delay the delivery of messages and let ntfy send them at a later date. This can be used to send yourself
     * reminders or even to execute commands at a later date (if your subscriber acts on messages).
     *
     * Usage is pretty straight forward. You can set the delivery time either by specifying a Unix timestamp (e.g.
     * `1639194738`), a duration (e.g. `30m`, `3h`, `2 days`), or a natural language time string (e.g. `10am`, `8:30pm`,
     * `tomorrow`, `3pm`, `Tuesday`, `7am`, [and more](https://github.com/olebedev/when)).
     *
     * As of today, the minimum delay you can set is 10 seconds and the maximum delay is 3 days. This can currently not be
     * configured otherwise ([let the author know](https://github.com/binwiederhier/ntfy/issues) if you'd like to change
     * these limits).
     *
     * For the purposes of [message caching](https://docs.ntfy.sh/config/#message-cache), scheduled messages are kept in
     * the cache until 12 hours after they were delivered (or whatever the server-side cache duration is set to). For
     * instance, if a message is scheduled to be delivered in 3 days, it'll remain in the cache for 3 days and 12 hours.
     * Also note that naturally, [turning off server-side caching](https://docs.ntfy.sh/publish/#message-caching) is not
     * possible in combination with this feature.
     */
    delay?: string;
    /**
     * **INFO**: If caching is disabled, messages will only be delivered to connected subscribers, and won't be
     * re-delivered if a client re-connects. If a subscriber has (temporary) network issues or is reconnecting
     * momentarily, **messages might be missed**.
     *
     * ---
     *
     * By default, the ntfy server caches messages on disk for 12 hours (see
     * [message caching](https://docs.ntfy.sh/config/#message-cache)), so all messages you publish are stored server-side
     * for a little while. The reason for this is to overcome temporary client-side network disruptions, but arguably this
     * feature also may raise privacy concerns.
     *
     * To avoid messages being cached server-side entirely, you can disable caching. This will make sure that your message
     * is not cached on the server, even if server-side caching is enabled. Messages are still delivered to connected
     * subscribers, but [`since=`](https://docs.ntfy.sh/subscribe/api/#fetch-cached-messages) and
     * [`poll=1`](https://docs.ntfy.sh/subscribe/api/#poll-for-messages) won't return the message anymore.
     */
    disableCache?: boolean;
    /**
     * **INFO**: If Firebase is disabled and instant delivery isn't enabled in the Android app (Google Play variant only),
     * message delivery will be significantly delayed (up to 15 minutes). To overcome this delay, simply enable instant
     * delivery.
     *
     * ---
     *
     * The ntfy server can be configured to use Firebase Cloud Messaging (FCM) (see Firebase config) for message delivery
     * on Android (to minimize the app's battery footprint). The ntfy.sh server is configured this way, meaning that all
     * messages published to ntfy.sh are also published to corresponding FCM topics.
     *
     * If you'd like to avoid forwarding messages to Firebase, you can disabled Firebase. This will instruct the server
     * not to forward messages to Firebase.
     */
    disableFirebase?: boolean;
    /**
     * You can forward messages to e-mail by specifying an address in the header. This can be useful for messages that
     * you'd like to persist longer, or to blast-notify yourself on all possible channels.
     *
     * Only one e-mail address is supported.
     *
     * Since ntfy does not provide auth (yet), the rate limiting is pretty strict (see
     * [limitations](https://docs.ntfy.sh/publish/#limitations)). In the default configuration, you get 16 e-mails per
     * visitor (IP address) and then after that one per hour. On top of that, your IP address appears in the e-mail body.
     * This is to prevent abuse.
     */
    emailAddress?: string;
    /**
     * Instead of sending a local file to your phone, you can use an external URL to specify where the attachment is
     * hosted. This could be a Dropbox link, a file from social media, or any other publicly available URL. Since the
     * files are externally hosted, the expiration or size limits from above do not apply here.
     *
     * To attach an external file, simple pass the `fileURL` parameter to specify the attachment URL. It can be any
     * type of file.
     *
     * ntfy will automatically try to derive the file name from the URL (e.g https://example.com/flower.jpg will yield a
     * filename flower.jpg). To override this filename, you may send use the `FileURL` object.
     */
    fileURL?: FileURL | string;
    /**
     * You can include an icon that will appear next to the text of the notification. Simply specify the URL that the icon
     * is located at. The client will automatically download the icon (unless it is already cached locally, and less than
     * 24 hours old), and show it in the notification. Icons are cached locally in the client until the notification is
     * deleted. **Only JPEG and PNG images are supported at this time**.
     */
    iconURL?: string;
    /**
     * By default, messages sent to ntfy are rendered as plain text.
     *
     * You can format messages using Markdown 🤩. That means you can use bold text, italicized text, links, images, and more. Supported Markdown features (web app only for now):
     * - Emphasis such as bold (**bold**), italics (*italics*)
     * - Links ([some tool](https://ntfy.sh))
     * - Images (![some image](https://bing.com/logo.png))
     * - Code blocks (```code blocks```) and inline code (`inline code`)
     * - Headings (# headings, ## headings, etc.)
     * - Lists (- lists, 1. lists, etc.)
     * - Blockquotes (> blockquotes)
     * - Horizontal rules (---)
     */
    markdown?: boolean;
    /**
     * All messages have a priority, which defines how urgently your phone notifies you. On Android, you can set custom
     * notification sounds and vibration patterns on your phone to map to these priorities (see
     * [Android config](https://docs.ntfy.sh/subscribe/phone/)).
     */
    priority?: MessagePriority;
    /**
     * Specify a custom ntfy Server. See [Self-hosting](https://docs.ntfy.sh/install/).
     */
    server?: string;
    /**
     * You can tag messages with emojis and other relevant strings:
     *
     * * Emojis: If a tag matches an [emoji short code](https://docs.ntfy.sh/emojis/), it'll be converted to an emoji and
     * prepended to title or message.
     * * Other tags: If a tag doesn't match, it will be listed below the notification.
     *
     * This feature is useful for things like warnings (⚠️, ️🚨, or 🚩), but also to simply tag messages otherwise (e.g.
     * script names, hostnames, etc.). Use [the emoji short code list](https://docs.ntfy.sh/emojis/) to figure out what
     * tags can be converted to emojis.
     */
    tags?: string | string[];
    /** The notification title is typically set to the topic short URL (e.g. `ntfy.sh/mytopic`). */
    title?: string;
    /**
     * Your topic to publish and subscribe to. Because there is no sign-up, the topic is essentially a password, so pick
     * something that's not easily guessable.
     */
    topic: string;
}
/**
 * The broadcast action sends an Android broadcast intent when the action button is tapped. This allows integration
 * into automation apps such as MacroDroid or Tasker, which basically means you can do everything your phone is
 * capable of. Examples include taking pictures, launching/killing apps, change device settings, write/read files,
 * etc.
 *
 * By default, the intent action **`io.heckel.ntfy.USER_ACTION`** is broadcast, though this can be changed with the
 * `intent` parameter. To send extras, use the `extras` parameter. Currently, only string extras are supported.
 */
export interface BroadcastAction {
    /** Clear notification after action button is tapped, default is `false`. */
    clear?: boolean;
    /** Android intent extras. */
    extras?: Record<string, string>;
    /** Android intent name, default is `io.heckel.ntfy.USER_ACTION`. */
    intent?: string;
    /** Label of the action button in the notification. */
    label: string;
}
export type Config = AttachmentConfig | MessageConfig;
export interface FileURL {
    filename: string;
    url: string;
}
export interface HTTPAction {
    /** HTTP body. */
    body?: string;
    /**
     * Clear notification after HTTP request succeeds. If the request fails, the notification is not cleared.
     * Default is `false`.
     */
    clear?: boolean;
    /** HTTP headers to pass in request. */
    headers?: Record<string, string>;
    /** Label of the action button in the notification. */
    label: string;
    /** HTTP method to use for request, default is POST ⚠️. */
    method?: HTTPMethod;
    /** URL to which the HTTP request will be sent. */
    url: string;
}
export type HTTPMethod = 'delete' | 'DELETE' | 'get' | 'GET' | 'head' | 'HEAD' | 'link' | 'LINK' | 'options' | 'OPTIONS' | 'patch' | 'PATCH' | 'post' | 'POST' | 'purge' | 'PURGE' | 'put' | 'PUT' | 'unlink' | 'UNLINK';
export type MessageConfig = {
    /**
     * Main body of the message as shown in the notification.
     */
    message: string;
} & BaseConfig;
export type ResponseData<T extends Config> = {
    id: string;
    time: number;
} & T;
/**
 * The view action **opens a website or app when the action button is tapped**, e.g. a browser, a Google Maps location,
 * or even a deep link into Twitter or a show ntfy topic. How exactly the action is handled depends on how Android and
 * your desktop browser treat the links. Normally it'll just open a link in the browser.
 *
 * Examples:
 *
 * * `http://` or `https://` will open your browser (or an app if it registered for a URL)
 * * `mailto:` links will open your mail app, e.g. `mailto:phil@example.com`
 * * `geo:` links will open Google Maps, e.g. `geo:0,0?q=1600+Amphitheatre+Parkway,+Mountain+View,+CA`
 * * `ntfy://` links will open ntfy (see [ntfy:// links](https://docs.ntfy.sh/subscribe/phone/#ntfy-links)), e.g.
 * `ntfy://ntfy.sh/stats`
 * * `twitter://` links will open Twitter, e.g. `twitter://user?screen_name=..`
 * * ...
 */
export interface ViewAction {
    /** Clear notification after action button is tapped, default is `false`. */
    clear?: boolean;
    /** Label of the action button in the notification */
    label: string;
    /** URL to open when action is tapped */
    url: string;
}