http://opcfoundation.org/UA/DI/http://opcfoundation.org/UA/Used to indicate that source and target Node have a topological connection.Defines the parent (i.e. the communication Device) of a Network.Used to bind the offline representation of a Device to the online representation.OnlineOfDefines the basic information components for all configurable elements in a device topologyOpcUa:HasInterfaceDI:IVendorNameplateTypeOpcUa:HasInterfaceDI:ITagNameplateTypeDefines the basic information components for all configurable elements in a device topologyIdentifier that uniquely identifies, within a manufacturer, a device instanceAn incremental counter indicating the number of times the static data within the Device has been modifiedName of the company that manufactured the deviceModel name of the deviceAddress (pathname in the file system or a URL | Web address) of user manual for the deviceOverall revision level of the deviceRevision level of the software/firmware of the deviceRevision level of the hardware of the deviceOpcUa:HasInterfaceDI:ISupportInfoTypeOpcUa:HasInterfaceDI:IDeviceHealthTypeAdds the concept of Blocks needed for block-oriented FieldDevicesIncremental counter indicating the number of times the static data within the Block has been modifiedCurrent mode of operation the Block is able to achieveModes of operation that are allowed for the Block based on application requirementsMode the Block should be set to during normal operating conditionsMode of operation that is desired for the BlockDefines a general pattern to expose and configure modular componentsFolderType is used to organize the Parameters and Methods from the complete set (ParameterSet, MethodSet) with regard to their applicationA user interface element assigned to this group.General structure of a Protocol ObjectTypeThis device functions normally.Malfunction of the device or any of its peripherals.Functional checks are currently performed.The device is currently working outside of its specified range or that internal diagnoses indicate deviations from measured or set values.This element is working, but a maintenance operation is required.The base type for all UI Element Types.Represents the communication means for Devices that are connected to it.Represents the interface (interface card) of a Device to a Network.Server-specific period of time in milliseconds until the Server will revoke a lock.OpcUa:HasPropertyOpcUa:Server_ServerCapabilitiesAn interface for Locking.1Lock1SoftwareUpdateThe currently used version of the software identified by the CurrentVersion Object.The pending version of the software that could be installed identified by the PendingVersion Object.The fallback version of the software identified by the FallbackVersion Object.If KeepsParameters is not set, the device will lose its configuration during update. The Client should do a backup of the parameters before the update and restore them afterwards.If WillDisconnect is set, the OPC UA Server will restart during installation. This can be the case if the update is about the firmware of the device that hosts the OPC UA Server.If RequiresPowerCycle is set, the devices require a manual power off / power on for installation.If WillReboot is set, the device will reboot during the update, inclusive of embedded infrastructure elements like an integrated switch. An update Client should take this into account since the devices behind an integrated switch are not reachable for that time.If NeedsPreparation is not set, the Client can install the update without maintaining the PrepareForUpdateStateMachine. This can be used to support an installation without stopping the software.