Name ==== ngx_lua_upstream - Nginx C module to expose Lua API to ngx_lua for Nginx upstreams Table of Contents ================= * [Name](#name) * [Status](#status) * [Synopsis](#synopsis) * [Functions](#functions) * [get_upstreams](#get_upstreams) * [get_servers](#get_servers) * [get_primary_peers](#get_primary_peers) * [get_backup_peers](#get_backup_peers) * [set_peer_down](#set_peer_down) * [TODO](#todo) * [Compatibility](#compatibility) * [Installation](#installation) * [Author](#author) * [Copyright and License](#copyright-and-license) * [See Also](#see-also) Status ====== This module is still under active development and is considered production ready. Synopsis ======== ```nginx http { upstream foo.com { server 127.0.0.1 fail_timeout=53 weight=4 max_fails=100; server agentzh.org:81; } upstream bar { server 127.0.0.2; } server { listen 8080; # sample output for the following /upstream interface: # upstream foo.com: # addr = 127.0.0.1:80, weight = 4, fail_timeout = 53, max_fails = 100 # addr = 106.187.41.147:81, weight = 1, fail_timeout = 10, max_fails = 1 # upstream bar: # addr = 127.0.0.2:80, weight = 1, fail_timeout = 10, max_fails = 1 location = /upstreams { default_type text/plain; content_by_lua ' local concat = table.concat local upstream = require "ngx.upstream" local get_servers = upstream.get_servers local get_upstreams = upstream.get_upstreams local us = get_upstreams() for _, u in ipairs(us) do ngx.say("upstream ", u, ":") local srvs, err = get_servers(u) if not srvs then ngx.say("failed to get servers in upstream ", u) else for _, srv in ipairs(srvs) do local first = true for k, v in pairs(srv) do if first then first = false ngx.print(" ") else ngx.print(", ") end if type(v) == "table" then ngx.print(k, " = {", concat(v, ", "), "}") else ngx.print(k, " = ", v) end end ngx.print("\\n") end end end '; } } } ``` Functions ========= [Back to TOC](#table-of-contents) get_upstreams ------------- `syntax: names = upstream.get_upstreams()` Get a list of the names for all the named upstream groups (i.e., explicit `upstream {}` blocks). Note that implicit upstream groups created by `proxy_pass` and etc are excluded. [Back to TOC](#table-of-contents) get_servers ----------- `syntax: servers = upstream.get_servers(upstream_name)` Get configurations for all the servers in the specified upstream group. Please one server may take multiple addresses when its server name can be resolved to multiple addresses. The return value is an array-like Lua table. Each table entry is a hash-like Lua table that takes the following keys: * addr socket address(es). can be either a Lua string or an array-like Lua table of Lua strings. * backup * fail_timeout * max_fails * weight [Back to TOC](#table-of-contents) get_primary_peers --------- `syntax: peers = upstream.get_primary_peers(upstream_name)` Get configurations for all the primary (non-backup) peers in the specified upstream group. The return value is an array-like Lua table for all the primary peers. Each table entry is a (nested) hash-like Lua table that takes the following keys: * current_weight * effective_weight * fail_timeout * fails * id Identifier (ID) for the peer. This ID can be used to reference a peer in a group in the peer modifying API. * max_fails * name Socket address for the current peer * weight * accessed Timestamp for the last access (in seconds since the Epoch) * checked Timestamp for the last check (in seconds since the Epoch) [Back to TOC](#table-of-contents) get_backup_peers ---------------- `syntax: peers = upstream.get_primary_peers(upstream_name)` Get configurations for all the backup peers in the specified upstream group. The return value has the same structure as [get_primary_peers](#get_primary_peers) function. [Back to TOC](#table-of-contents) set_peer_down ------------- `syntax: ok, err = upstream.set_peer_down(upstream_name, is_backup, peer_id, down_value)` Set the "down" (boolean) attribute of the specified peer. To uniquely specify a peer, you need to specify the upstream name, whether or not it is a backup peer, and the peer id (starting from 0). Note that this method only changes the peer settings in the current Nginx worker process. You need to synchronize the changes across all the Nginx workers yourself if you want a server-wide change (for example, by means of [ngx_lua](https://github.com/openresty/lua-nginx-module#ngxshareddict)'s [ngx.shared.DICT](https://github.com/openresty/lua-nginx-module#ngxshareddict)). Below is an example. Consider we have a "bar" upstream block in `nginx.conf`: ```nginx upstream bar { server 127.0.0.2; server 127.0.0.3 backup; server 127.0.0.4 fail_timeout=23 weight=7 max_fails=200 backup; } ``` then ```lua upstream.set_peer_down("bar", false, 0, true) ``` will turn down the primary peer corresponding to `server 127.0.0.2`. Similarly, ```lua upstream.set_peer_down("bar", true, 1, true) ``` will turn down the backup peer corresponding to `server 127.0.0.4 ...`. You can turn on a peer again by providing a `false` value as the 4th argument. [Back to TOC](#table-of-contents) TODO ==== * Add API to add or remove servers to existing upstream groups. [Back to TOC](#table-of-contents) Compatibility ============= The following versions of Nginx should work with this module: * **1.5.x** (last tested: 1.5.12) [Back to TOC](#table-of-contents) Installation ============ This module is bundled and enabled by default in the [OpenResty](http://openresty.org) bundle. And you are recommended to use OpenResty. 1. Grab the nginx source code from [nginx.org](http://nginx.org/), for example, the version 1.5.12 (see [nginx compatibility](#compatibility)), 2. then grab the source code of the [ngx_lua](https://github.com/openresty/lua-nginx-module#installation) as well as its dependencies like [LuaJIT](http://luajit.org/download.html). 3. and finally build the source with this module: ```bash wget 'http://nginx.org/download/nginx-1.5.12.tar.gz' tar -xzvf nginx-1.5.12.tar.gz cd nginx-1.5.12/ # assuming your luajit is installed to /opt/luajit: export LUAJIT_LIB=/opt/luajit/lib # assuming you are using LuaJIT v2.1: export LUAJIT_INC=/opt/luajit/include/luajit-2.1 # Here we assume you would install you nginx under /opt/nginx/. ./configure --prefix=/opt/nginx \ --with-ld-opt="-Wl,-rpath,$LUAJIT_LIB" \ --add-module=/path/to/lua-nginx-module \ --add-module=/path/to/lua-upstream-nginx-module make -j2 make install ``` If you are using [ngx_openresty](http://openresty.org), then you can just add this module to OpenResty like this: ```bash ./configure --add-module=/path/to/lua-upstream-nginx-module make -j2 make install ``` And you are all set. This module will get bundled into OpenResty in the near future. [Back to TOC](#table-of-contents) Author ====== Yichun "agentzh" Zhang (章亦春) , CloudFlare Inc. [Back to TOC](#table-of-contents) Copyright and License ===================== This module is licensed under the BSD license. Copyright (C) 2014, by Yichun "agentzh" Zhang, CloudFlare Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. [Back to TOC](#table-of-contents) See Also ======== * the ngx_lua module: http://github.com/openresty/lua-nginx-module#readme * the [lua-resty-upstream-healthcheck](https://github.com/openresty/lua-resty-upstream-healthcheck) library which makes use of the Lua API provided by this module. [Back to TOC](#table-of-contents)