import { DeviceLogLine } from './device-log-line';
import { HardwareDescription, StackInfo } from './hardware-description';
import { IntegroVariant } from './integro-variant';
import { UIFeaturesConfig } from './parameter';
import { DeviceRef, DeviceRefObj, PlantModel } from './types';
export declare const filenamePartRegExp: RegExp;
/**
 * Represents a single device with extended metadata beyond what the Motion Master API provides.
 *
 * Some properties—such as the serial number, hardware description, and variant—must be retrieved
 * through additional file requests from Motion Master.
 */
export interface Device {
    /**
     * The EtherCAT alias of the device, if configured.
     */
    alias?: number;
    /**
     * The device address assigned by the EtherCAT master.
     *
     * Used when sending commands to Motion Master. Since the address changes after each
     * power cycle, the client library uses {@link DeviceRef} as a stable reference.
     */
    deviceAddress: number;
    /**
     * The product ID of the device.
     * Example: `8506`
     */
    deviceProductId?: string;
    /**
     * Firmware ID used to identify and resolve the firmware package for the device.
     */
    fwid?: string;
    /**
     * Parsed `.hardware_description` file containing hardware details.
     */
    hardwareDescription?: HardwareDescription;
    /**
     * Unique identifier of the device, typically its serial number.
     */
    id: string;
    /**
     * Identifier of the image associated with this device.
     * Retrieved from the assembly or device entries of the hardware description file.
     */
    imageId?: string;
    /**
     * Parsed `.variant` file describing variant-specific information.
     */
    integroVariant?: IntegroVariant;
    /**
     * Device position in the EtherCAT topology.
     *
     * - SOEM: positions start at 1 (0 is broadcast)
     * - IgH EtherCAT Master: positions start at 0
     */
    position?: number;
    /**
     * Product ID of the device or its assembly.
     * Example: `6000`
     */
    productId?: string;
    /**
     * Serial number read from the hardware description file.
     */
    serialNumber?: string;
    /**
     * Parsed `.stack_info.json` file with stack-related metadata.
     */
    stackInfo?: StackInfo;
    /**
     * Device type:
     * - `0`: UNSPECIFIED
     * - `1`: SOMANET_CIA401_ETHERCAT
     * - `2`: SOMANET_CIA402_ETHERCAT
     */
    type?: number;
    /**
     * UI configuration for device-specific features.
     */
    uiFeaturesConfig?: UIFeaturesConfig;
    /**
     * Product ID and revision combined.
     * Example: `8506-01`
     */
    versionedDeviceProductId?: string;
    /**
     * Product or assembly ID and revision combined.
     * Example: `6000-01`
     */
    versionedProductId?: string;
}
/**
 * Returns the first defined value from a {@link DeviceRefObj}.
 */
export declare function getDeviceRefFromDeviceRefObj(deviceRefObj: DeviceRefObj): string | number | null;
/**
 * Ensures that a {@link DeviceRef} is numeric if possible.
 *
 * If the value is numeric-like, it is converted to a number; otherwise the original string is returned.
 */
export declare function ensureDeviceRef(deviceRef: DeviceRef): DeviceRef;
/**
 * Converts a {@link DeviceRef} into a structured {@link DeviceRefObj}.
 *
 * - Numbers ≤ `0xffff` are treated as device positions.
 * - Larger numbers are treated as device addresses.
 * - Strings are treated as serial numbers.
 */
export declare function makeDeviceRefObj(deviceRef: DeviceRef): DeviceRefObj;
/**
 * Type guard verifying that a value is a valid {@link DeviceRef}.
 */
export declare function isDeviceRef(deviceRef: any): deviceRef is DeviceRef;
/**
 * Validates the structure of a {@link DeviceRefObj}.
 */
export declare function isValidDeviceRefObj(obj: DeviceRefObj): boolean;
/**
 * Parses a single device log line.
 *
 * Expected format:
 * `HH:MM:SS.mmm LEVEL|MESSAGE`
 */
export declare function parseDeviceLog(line: string): DeviceLogLine | undefined;
/**
 * Parses multi-line log content into an array of {@link DeviceLogLine}.
 */
export declare function parseDeviceLogContent(content: string): DeviceLogLine[];
/**
 * Computes the "zero home offset" given a home offset and the current device position.
 */
export declare function computeZeroHomeOffsetFromPosition(homeOffset: number, position: number): number;
/**
 * Name of the FoE file used to unlock protected filesystem operations.
 *
 * Sending a FoE read command with this filename allows writing or deleting
 * protected files (i.e., files whose names start with a dot).
 */
export declare const stackUnlockFilename = "fs-stackunlock=DD1317";
/**
 * Base64-encoded empty firmware image used during Factory Reset
 * to remove the currently installed firmware.
 */
export declare const emptyAppBase64 = "UEsDBBQACAAIABBye08AAAAAAAAAAAAAAAANACAAYXBwX2VtcHR5LmJpblVUDQAHMHfeXTB33l0wd95ddXgLAAEE6AMAAAToAwAAAwBQSwcIAAAAAAIAAAAAAAAAUEsBAhQDFAAIAAgAEHJ7TwAAAAACAAAAAAAAAA0AIAAAAAAAAAAAAKSBAAAAAGFwcF9lbXB0eS5iaW5VVA0ABzB33l0wd95dMHfeXXV4CwABBOgDAAAE6AMAAFBLBQYAAAAAAQABAFsAAABdAAAAAAA=";
/**
 * Returns `true` if the filename represents a multi-part ZIP file.
 */
export declare function isFilenamePart(filename: string): boolean;
/**
 * Default set of files preserved during Factory Reset.
 */
export declare const factoryResetDefaultFilesToKeep: string[];
/**
 * Computes the effective mechanical gear ratio between motor revolutions and
 * shaft revolutions. The returned value represents:
 *
 *    gearRatio = motorRevolutions / shaftRevolutions
 *
 * Special handling is applied when both the torque controller and the position
 * controller use the same encoder source. In that case, there is no physical
 * external gearing, meaning both controllers observe identical positions, so
 * the gear ratio is considered to be 1.
 *
 * If shaft revolutions equals 0 (invalid or unavailable data), a default gear
 * ratio of 1 is returned as a safe fallback.
 *
 * @param props Object containing:
 * - `motorRevolutions` Number of motor-side revolutions defined in device parameters.
 * - `shaftRevolutions` Number of shaft-side revolutions defined in device parameters.
 * - `torqueControllerEncoderSource` Encoder source used by the torque controller. A value of 0 means no assigned encoder.
 * - `positionControllerEncoderSource` Encoder source used by the position controller. A value of 0 means no assigned encoder.
 *
 * @returns The computed gear ratio. Produces:
 * - `1` if both controllers use the same encoder source, or if shaftRevolutions is `0`.
 * - `(motorRevolutions / shaftRevolutions)` otherwise.
 */
export declare function computeGearRatio(props: {
    motorRevolutions: number;
    shaftRevolutions: number;
    torqueControllerEncoderSource: number;
    positionControllerEncoderSource: number;
}): number;
/**
 * Converts a commutation angle offset from encoder counts
 * to electrical degrees.
 *
 * The input value is assumed to be in the range `[0, 4095]`,
 * representing a full electrical revolution. The result is
 * rounded to the nearest integer degree.
 *
 * @param value - Commutation angle offset in encoder counts
 * @returns Commutation angle in electrical degrees (0–360)
 */
export declare function convertCommutationAngleOffsetToElectricalDegrees(value: number): number;
/**
 * Parses a CSV representation of a plant model into a `PlantModel` object.
 *
 * The CSV is expected to have up to three lines:
 * 1. Numerator coefficients (comma-separated)
 * 2. Denominator coefficients (comma-separated), with the last two values representing friction and inertia
 * 3. Optional chirp signal parameters: startFrequency, endFrequency, torqueAmplitude, duration, signalType
 *
 * If `content` is null, undefined, or empty, a `PlantModel` with default values is returned.
 *
 * @param content - The CSV content as a string or Uint8Array. Can be null or undefined.
 * @returns A `PlantModel` object with the parsed numerator, denominator, friction, inertia,
 *          and optional chirp signal parameters (`startFrequency`, `endFrequency`,
 *          `torqueAmplitude`, `durationSeconds`, `signalType`).
 */
export declare function parsePlantModelCsv(content: Uint8Array | string | null | undefined): PlantModel;