SNMP4J-CONFIG-MIB DEFINITIONS ::= BEGIN IMPORTS snmp4jAgentModules FROM SNMP4J-AGENT-REG DisplayString, RowStatus, StorageType, TimeStamp FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-IDENTITY, OBJECT-TYPE, TimeTicks FROM SNMPv2-SMI OBJECT-GROUP FROM SNMPv2-CONF; snmp4jCfgMIB MODULE-IDENTITY LAST-UPDATED "200608311905Z" -- Aug 31, 2006 7:05:00 PM ORGANIZATION "SNMP4J.ORG" CONTACT-INFO "Frank Fock http://www.snmp4j.org fock@snmp4j.org" DESCRIPTION "This MIB module defines managed objects for the configuration of a SNMP4J agent." REVISION "200608311905Z" -- Aug 31, 2006 7:05:00 PM DESCRIPTION "Added error(5) state to snmp4jCfgStorageOperation." REVISION "200601301947Z" -- Jan 30, 2006 7:47:00 PM DESCRIPTION "Initial version." -- 1.3.6.1.4.1.4976.10.1.1.2 ::= { snmp4jAgentModules 2 } -- Scalars and Tables -- snmp4jCfgObjects OBJECT IDENTIFIER -- 1.3.6.1.4.1.4976.10.1.1.2.1 ::= { snmp4jCfgMIB 1 } snmp4jCfgSecurity OBJECT IDENTIFIER -- 1.3.6.1.4.1.4976.10.1.1.2.1.1 ::= { snmp4jCfgObjects 1 } snmp4jCfgSecSrcAddrValidation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), notAvailable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether SNMPv1/v2c source address validation via the snmpTargetAddrExtTable and the snmpCommunityTable is enabled or disabled. If the value of this object is notAvailable(3), then at least one of the necessary MIB modules are not implemented for this agent instance and an attempt to set this object's value to enabled(1) or disabled(2) will result in a wrongValue error." -- 1.3.6.1.4.1.4976.10.1.1.2.1.1.1 ::= { snmp4jCfgSecurity 1 } snmp4jCfgStorage OBJECT IDENTIFIER -- 1.3.6.1.4.1.4976.10.1.1.2.1.2 ::= { snmp4jCfgObjects 2 } snmp4jCfgStorageTable OBJECT-TYPE SYNTAX SEQUENCE OF Snmp4jCfgStorageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing a list of SNMP4J-Agent persistent storage configurations. By default this table contains a single row with an snmp4jCfgStorageName of 'primary' that represents the persistent storage configuration used to load the agent's configuration at boot time. This entry will have a storage type of 'permanent' and thus it cannot be deleted. Other entries may be added to provide for experimental or backup storage.'" -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1 ::= { snmp4jCfgStorage 1 } snmp4jCfgStorageEntry OBJECT-TYPE SYNTAX Snmp4jCfgStorageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row specifying the location and storage format of an SNMP4J-Agent agent configuration." INDEX { snmp4jCfgStorageName } -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1 ::= { snmp4jCfgStorageTable 1 } Snmp4jCfgStorageEntry ::= SEQUENCE { snmp4jCfgStorageName SnmpAdminString, snmp4jCfgStoragePath DisplayString, snmp4jCfgStorageFormat INTEGER, snmp4jCfgStorageLastStore TimeTicks, snmp4jCfgStorageLastRestore TimeTicks, snmp4jCfgStorageRestoreMode INTEGER, snmp4jCfgStorageOperation INTEGER, snmp4jCfgStorageStorageType StorageType, snmp4jCfgStorageStatus RowStatus } snmp4jCfgStorageName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the configuration storage entry. A default SNMP4J-Agent agent implementation will always contain an entry (row) with the name 'primary'. The 'primary' entry specifies the storage from which the agent reads its configuration after a restart. the" -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.1 ::= { snmp4jCfgStorageEntry 1 } snmp4jCfgStoragePath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The path to the configuration on the agent's file system. Depending on the persistent storage type, the path can be a directory or a file. If the path is a directory, the last character of the path has to be the file separation character (on UNIX '/') of the platform the agent is running on." -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.2 ::= { snmp4jCfgStorageEntry 2 } snmp4jCfgStorageFormat OBJECT-TYPE SYNTAX INTEGER { binary(1), -- Default format xml(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The storage format specifies the format of the persistent configuration storage associated with this row. Currently only SNMP4J-Agent's binary encoded MIB object serialization 'binary(1)' is supported." DEFVAL { binary } -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.3 ::= { snmp4jCfgStorageEntry 3 } snmp4jCfgStorageLastStore OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last store operation on the configuration persistent storage represented by this entry. A zero value is returned when this configuration have not been written since the last agent restart. This object will be reset to 0 if snmp4jCfgStoragePath is altered for this row." DEFVAL { 0 } -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.4 ::= { snmp4jCfgStorageEntry 4 } snmp4jCfgStorageLastRestore OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp when the configuration of this persistent storage has been restored for the last time. A zero value is returned, when this configuration has not been read since the last restart of the agent. This object will be reset to 0 if snmp4jCfgStoragePath is altered for this row." DEFVAL { 0 } -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.5 ::= { snmp4jCfgStorageEntry 5 } snmp4jCfgStorageRestoreMode OBJECT-TYPE SYNTAX INTEGER { replaceAndCreate(1), updateAndCreate(2), updateOnly(3), createOnly(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The restore mode defines how the configuration should be restored and optionally merged with the current running configuration." DEFVAL { replaceAndCreate } -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.6 ::= { snmp4jCfgStorageEntry 6 } snmp4jCfgStorageOperation OBJECT-TYPE SYNTAX INTEGER { idle(1), -- no action inProgress(2), -- (re)store operation in progress store(3), -- store current configuration restore(4), -- restore configuration error(5) -- last operation failed } MAX-ACCESS read-create STATUS current DESCRIPTION "The states 'idle(1)', 'inProgress(2)', and 'error(5)' can only be read, whereas the states 'store(3)' and 'restore(4)' can only be written. Setting this object to 'store(3)' will save the agent's configuration to the location identified by snmp4jCfgStoragePath. Setting this object to 'restore(4)' resets the agent to the configuration read from location snmp4jCfgStoragePath. While the two operations above are in progress, this object returns 'inProgress(2)' on get requests. Otherwise 'idle(1)' is returned on get requests. If the last operation failed with an error, error(5) is is returned. An operation may fail because an IO exception occurred while accessing persistent storage, for example. While its state is 'inProgress' any set request returns a 'resourceUnavailable(13)' error." DEFVAL { idle } -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.7 ::= { snmp4jCfgStorageEntry 7 } snmp4jCfgStorageStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type of the entry in the SNMP4J-Agent persistent storage table." DEFVAL { nonVolatile } -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.8 ::= { snmp4jCfgStorageEntry 8 } snmp4jCfgStorageStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Control for creating and deleting entries. Entries may not be modified while active." -- 1.3.6.1.4.1.4976.10.1.1.2.1.2.1.1.9 ::= { snmp4jCfgStorageEntry 9 } -- Notification Types -- snmp4jCfgEvents OBJECT IDENTIFIER -- 1.3.6.1.4.1.4976.10.1.1.2.2 ::= { snmp4jCfgMIB 2 } -- Conformance -- snmp4jCfgConf OBJECT IDENTIFIER -- 1.3.6.1.4.1.4976.10.1.1.2.3 ::= { snmp4jCfgMIB 3 } -- Groups -- snmp4jCfgGroups OBJECT IDENTIFIER -- 1.3.6.1.4.1.4976.10.1.1.2.3.1 ::= { snmp4jCfgConf 1 } -- Compliance -- snmp4jCfgCompls OBJECT IDENTIFIER -- 1.3.6.1.4.1.4976.10.1.1.2.3.2 ::= { snmp4jCfgConf 2 } snmp4jCfgBasicGroup OBJECT-GROUP OBJECTS { snmp4jCfgSecSrcAddrValidation, snmp4jCfgStorageFormat, snmp4jCfgStorageLastRestore, snmp4jCfgStorageLastStore, snmp4jCfgStorageOperation, snmp4jCfgStoragePath, snmp4jCfgStorageRestoreMode, snmp4jCfgStorageStatus, snmp4jCfgStorageStorageType } STATUS current DESCRIPTION "Basic objects." -- 1.3.6.1.4.1.4976.10.1.1.2.3.1.1 ::= { snmp4jCfgGroups 1 } END