import { OnOffToggle } from '../../../common/constants/attribute-values';
import { BridgeSlavePortStates } from '../../link.constants';
/**
 * Set link bridge-slave type args.
 * @category Interfaces
 */
export interface SetLinkBridgeSlaveTypeArgs {
    /** Flush bridge slave's fdb dynamic entries. */
    fdb_flush?: true;
    /** Set port state. */
    state?: BridgeSlavePortStates;
    /** Set port priority (allowed values are between 0 and 63, inclusively). */
    priority?: number;
    /** Set port cost (allowed values are between 1 and 65535, inclusively). */
    cost?: number;
    /** Block incoming BPDU packets on this port. */
    guard?: OnOffToggle;
    /**
     * Enable hairpin mode on this port.
     * This will allow incoming packets on this port to be reflected back.
     */
    hairpin?: OnOffToggle;
    /** Enable multicast fast leave on this port. */
    fastleave?: OnOffToggle;
    /** Block this port from becoming the bridge's root port. */
    root_block?: true;
    /** Allow MAC address learning on this port. */
    learning?: true;
    /**
     * Open the flood gates on this port, i.e. forward all unicast frames to this port also.
     * Requires {@link proxy_arp} and {@link proxy_arp_wifi} to be turned off.
     */
    flood?: true;
    /** Enable proxy ARP on this port. */
    proxy_arp?: true;
    /** Enable proxy ARP on this port which meets extended requirements by IEEE 802.11 and Hotspot 2.0 specifications. */
    proxy_arp_wifi?: true;
    /**
     * Configure this port for having multicast routers attached.
     * A port with a multicast router will receive all multicast traffic.
     * MULTICAST_ROUTER may be either 0 to disable multicast routers on this port, 1 to let the system detect
     * the presence of routers (this is the default), 2 to permanently enable multicast traffic forwarding on
     * this port or 3 to enable multicast routers temporarily on this port, not depending on incoming queries.
     */
    mcast_router?: number;
    /** This is a synonym to the fastleave option above. */
    mcast_fast_leave?: OnOffToggle;
    /** Controls whether a given port will flood multicast traffic for which there is no MDB entry. */
    mcast_flood?: OnOffToggle;
    /**
     * Controls whether a given port will replicate packets using unicast instead of multicast.
     * By default this flag is off.
     */
    mcast_to_unicast?: OnOffToggle;
    /**
     * Set the group forward mask.
     * This is the bitmask that is applied to decide whether to forward incoming frames destined to link-local addresses,
     * ie addresses of the form 01:80:C2:00:00:0X (defaults to 0, ie the bridge does not forward any link-local frames
     * coming on this port).
     */
    group_fwd_mask?: number;
    /**
     * Controls whether neighbour discovery (arp and nd) proxy and suppression is enabled on the port.
     * By default this flag is off.
     */
    neigh_suppress?: OnOffToggle;
    /**
     * Controls whether vlan to tunnel mapping is enabled on the port.
     * By default this flag is off.
     */
    vlan_tunnel?: OnOffToggle;
    isolated?: OnOffToggle;
    /** If the port loses carrier all traffic will be redirected to the configured backup port */
    backup_port?: string;
    /** Removes the currently configured backup port. */
    nobackup_port?: true;
}