{ "tab_connection": "Connection", "tab_advanced": "Advanced", "label_host": "NUT server host", "help_host": "Hostname or IP address of the NUT server (e.g. 192.168.1.100)", "placeholder_host": "192.168.1.100", "label_port": "Port", "help_port": "Port the NUT server listens on — 3493 unless upsd was configured differently", "label_networkInterface": "Network interface", "help_networkInterface": "Select a specific network interface for outgoing connections (optional)", "label_pollInterval": "Poll interval (s)", "help_pollInterval": "How often to query the NUT server (2–300 seconds)", "label_username": "Username", "help_username": "NUT username (optional — required for commands and writable variables)", "label_password": "Password", "help_password": "Password of that NUT user, stored encrypted. Only needed for commands and writable variables", "btn_checkConnection": "Test connection", "label_commandTimeout": "Command timeout (s)", "help_commandTimeout": "Timeout for individual NUT commands (1–30 seconds)", "label_enableCommands": "Enable instant commands", "help_enableCommands": "Allow sending instant commands (INSTCMD) to the UPS — requires authentication", "label_enableSetVar": "Enable writable variables", "help_enableSetVar": "Allow changing writable UPS variables (SET VAR) — requires authentication", "supportHeader": "Support", "aboutInfo": "ioBroker.nut2 monitors UPS devices via the Network UPS Tools (NUT) protocol. All UPS devices connected to a NUT server are automatically discovered.", "donateKofi": "Support on Ko-fi", "donatePaypal": "Donate via PayPal", "channelInfo": "Adapter information", "connectionStatus": "Connection status", "channelBattery": "Battery", "channelDevice": "Device", "channelDriver": "Driver", "channelInput": "Input power", "channelOutput": "Output power", "channelUps": "UPS", "channelOutlet": "Outlets", "channelAmbient": "Ambient sensors", "channelStatus": "Status flags", "channelCommands": "Commands", "statusRaw": "Raw status", "statusSeverity": "Severity level", "statusDisplay": "Status display", "upsReachable": "Reachable", "notifyTrigger": "Trigger poll (upsmon event)", "upsLastNotify": "Last upsmon event", "channelUpsInfo": "Information", "flagOnline": "On line power", "flagOnBattery": "On battery", "flagLowBattery": "Low battery", "flagHighBattery": "High battery", "flagReplaceBattery": "Replace battery", "flagCharging": "Charging", "flagDischarging": "Discharging", "flagBypass": "Bypass active", "flagCalibrating": "Calibrating", "flagOff": "Off", "flagOverloaded": "Overloaded", "flagTrimming": "Trimming voltage", "flagBoosting": "Boosting voltage", "flagForcedShutdown": "Forced shutdown", "flagAlarm": "Alarm", "cmdBeeperDisable": "Disable beeper", "cmdBeeperEnable": "Enable beeper", "cmdBeeperMute": "Mute beeper", "cmdLoadOff": "Turn off load", "cmdLoadOn": "Turn on load", "cmdLoadOffDelay": "Turn off load (delayed)", "cmdLoadOnDelay": "Turn on load (delayed)", "cmdShutdownReturn": "Shutdown and return", "cmdShutdownStayoff": "Shutdown and stay off", "cmdShutdownStop": "Stop shutdown", "cmdShutdownReboot": "Reboot UPS", "cmdTestBatteryStart": "Start battery test", "cmdTestBatteryStop": "Stop battery test", "cmdCalibrateStart": "Start calibration", "cmdCalibrateStop": "Stop calibration", "ambient.contacts.status": "Contact status", "ambient.humidity": "Ambient humidity", "ambient.humidity.alarm": "Humidity alarm", "ambient.present": "Sensor present", "ambient.temperature": "Ambient temperature", "ambient.temperature.status": "Temperature status", "battery.alarm.threshold": "Battery alarm threshold", "battery.capacity": "Battery capacity", "battery.capacity.nominal": "Nominal capacity", "battery.charge": "Charge", "battery.charge.approx": "Approximate charge", "battery.charge.low": "Low charge threshold", "battery.charge.restart": "Restart charge threshold", "battery.charge.warning": "Warning charge threshold", "battery.charger.status": "Charger status", "battery.charger.type": "Charger type", "battery.current": "Battery current", "battery.current.total": "Total battery current", "battery.date": "Battery date", "battery.date.maintenance": "Next battery maintenance", "battery.energysave": "Energy-saving mode", "battery.energysave.delay": "Energy-saving delay", "battery.energysave.load": "Energy-saving load threshold", "battery.energysave.realpower": "Energy-saving power threshold", "battery.mfr.date": "Battery manufacturing date", "battery.packs": "Battery packs", "battery.packs.bad": "Faulty battery packs", "battery.packs.external": "External battery packs", "battery.protection": "Deep-discharge protection", "battery.runtime": "Runtime remaining", "battery.runtime.low": "Low runtime threshold", "battery.runtime.restart": "Restart runtime threshold", "battery.status": "Battery health", "battery.temperature": "Battery temperature", "battery.temperature.cell.max": "Highest cell temperature", "battery.temperature.cell.min": "Lowest cell temperature", "battery.type": "Battery type", "battery.voltage": "Battery voltage", "battery.voltage.cell.max": "Highest cell voltage", "battery.voltage.cell.min": "Lowest cell voltage", "battery.voltage.high": "Full-charge voltage", "battery.voltage.low": "Empty-battery voltage", "battery.voltage.nominal": "Nominal battery voltage", "device.contact": "Contact person", "device.count": "Device count", "device.description": "Description", "device.location": "Location", "device.macaddr": "MAC address", "device.mfr": "Manufacturer", "device.model": "Model", "device.part": "Part number", "device.serial": "Serial number", "device.type": "Device type", "device.uptime": "Uptime", "device.usb.version": "USB version", "driver.flag.allow_killpower": "Allow kill power", "driver.flag.ignorelb": "Ignore low battery", "driver.name": "Driver name", "driver.parameter.pollfreq": "Poll frequency", "driver.parameter.pollinterval": "Poll interval", "driver.parameter.port": "Port", "driver.parameter.synchronous": "Synchronous mode", "driver.state": "Driver state", "driver.version": "Driver version", "driver.version.data": "Driver data version", "driver.version.internal": "Driver internal version", "driver.version.usb": "USB library version", "input.bypass.frequency": "Bypass frequency", "input.bypass.switch.off": "Switch bypass off", "input.bypass.switch.on": "Switch bypass on", "input.bypass.switchable": "Bypass switchable", "input.bypass.voltage": "Bypass voltage", "input.current": "Input current", "input.current.high.critical": "Critical high input current", "input.current.high.warning": "Warning high input current", "input.current.low.critical": "Critical low input current", "input.current.low.warning": "Warning low input current", "input.current.nominal": "Nominal input current", "input.current.status": "Input current status", "input.eco.switchable": "Eco mode switchable", "input.feed.color": "Feed cable colour", "input.feed.desc": "Feed name", "input.frequency": "Input frequency", "input.frequency.extended": "Extended frequency range", "input.frequency.high": "Upper frequency limit", "input.frequency.low": "Lower frequency limit", "input.frequency.nominal": "Nominal input frequency", "input.frequency.nominal.range": "Permitted frequency deviation", "input.frequency.status": "Input frequency status", "input.load": "Input load", "input.phase.shift": "Phase shift", "input.phases": "Input phases", "input.power": "Input apparent power", "input.quality": "Mains quality", "input.realpower": "Input active power", "input.realpower.nominal": "Nominal input active power", "input.sensitivity": "Input sensitivity", "input.source": "Active input source", "input.source.preferred": "Preferred input source", "input.transfer.boost.high": "Boost upper voltage", "input.transfer.boost.low": "Boost lower voltage", "input.transfer.bypass.forced": "Forced bypass transfer", "input.transfer.bypass.high": "Upper bypass voltage limit", "input.transfer.bypass.low": "Lower bypass voltage limit", "input.transfer.bypass.outlimits": "Bypass on output out of limits", "input.transfer.bypass.overload": "Bypass on overload", "input.transfer.delay": "Transfer delay", "input.transfer.eco.high": "Upper eco mode voltage", "input.transfer.eco.low": "Lower eco mode voltage", "input.transfer.frequency.bypass.range": "Permitted bypass frequency deviation", "input.transfer.frequency.eco.range": "Permitted eco mode frequency deviation", "input.transfer.high": "High transfer voltage", "input.transfer.high.max": "Highest settable upper threshold", "input.transfer.high.min": "Lowest settable upper threshold", "input.transfer.hysteresis": "Transfer hysteresis", "input.transfer.low": "Low transfer voltage", "input.transfer.low.max": "Highest settable lower threshold", "input.transfer.low.min": "Lowest settable lower threshold", "input.transfer.reason": "Reason for last transfer", "input.transfer.trim.high": "Trim upper voltage", "input.transfer.trim.low": "Trim lower voltage", "input.voltage": "Input voltage", "input.voltage.extended": "Extended voltage range", "input.voltage.high.critical": "Critical high input voltage", "input.voltage.high.warning": "Warning high input voltage", "input.voltage.low.critical": "Critical low input voltage", "input.voltage.low.warning": "Warning low input voltage", "input.voltage.maximum": "Maximum input voltage", "input.voltage.minimum": "Minimum input voltage", "input.voltage.nominal": "Nominal input voltage", "input.voltage.status": "Input voltage status", "outlet.count": "Outlet count", "outlet.current": "Outlet current", "outlet.delay.shutdown": "Outlet shutdown delay", "outlet.desc": "Outlet description", "outlet.group.id": "Outlet group ID", "outlet.group.status": "Outlet group status", "outlet.group.type": "Outlet group type", "outlet.id": "Outlet ID", "outlet.status": "Outlet status", "outlet.switchable": "Switchable", "output.current": "Output current", "output.current.nominal": "Nominal output current", "output.frequency": "Output frequency", "output.frequency.nominal": "Nominal output frequency", "output.inverter.latency": "Inverter switch-over time", "output.phases": "Output phases", "output.power": "Output apparent power", "output.voltage": "Output voltage", "output.voltage.nominal": "Nominal output voltage", "power.percent": "Apparent power share", "ups.alarm": "UPS alarm", "ups.beeper.status": "Beeper status", "ups.contacts": "Dry contacts", "ups.date": "UPS date", "ups.delay.reboot": "Reboot off time", "ups.delay.shutdown": "Shutdown delay", "ups.delay.start": "Start delay", "ups.display.language": "Display language", "ups.efficiency": "Efficiency", "ups.firmware": "Firmware version", "ups.firmware.aux": "Auxiliary firmware version", "ups.id": "UPS identifier", "ups.load": "Load", "ups.load.high": "Overload threshold", "ups.mfr": "UPS manufacturer", "ups.mfr.date": "UPS manufacturing date", "ups.mode": "Operating mode", "ups.model": "UPS model", "ups.power": "Apparent power", "ups.power.nominal": "Nominal power", "ups.productid": "Product ID", "ups.realpower": "Real power", "ups.realpower.nominal": "Nominal active power", "ups.serial": "UPS serial number", "ups.shutdown": "Shutdown enabled", "ups.start.auto": "Automatic restart", "ups.start.battery": "Cold start on battery", "ups.start.reboot": "Restart after shutdown", "ups.status": "UPS status", "ups.temperature": "UPS temperature", "ups.test.date": "Last self-test", "ups.test.interval": "Self-test interval", "ups.test.result": "Self-test result", "ups.time": "UPS time", "ups.timer.reboot": "Reboot countdown", "ups.timer.shutdown": "Shutdown timer", "ups.timer.start": "Start timer", "ups.type": "UPS type", "ups.vendorid": "Vendor ID", "ups.watchdog.status": "Watchdog status", "flagWaiting": "Waiting", "flagEcoMode": "ECO mode", "label_useTls": "Use TLS (STARTTLS)", "help_useTls": "Encrypt the connection via STARTTLS — recommended when sending a username and password", "label_tlsRejectUnauthorized": "Require valid certificate", "help_tlsRejectUnauthorized": "Reject self-signed or invalid certificates. Leave off for a typical self-signed NUT server; enable for man-in-the-middle protection (a CA file below lets you trust your own certificate)", "label_tlsCaFile": "CA certificate file", "help_tlsCaFile": "Path to a PEM file on the ioBroker host with the certificate authority (or the self-signed server certificate) the strict check should trust — leave empty to trust the system certificate store only", "placeholder_tlsCaFile": "/opt/iobroker/nut-ca.pem", "cmdShutdownDefault": "Default shutdown", "cmdShutdownRebootGraceful": "Graceful reboot", "cmdTestPanelStart": "Start panel test", "cmdTestPanelStop": "Stop panel test", "cmdTestFailureStart": "Start power-failure test", "cmdTestFailureStop": "Stop power-failure test", "cmdTestBatteryStartQuick": "Start quick battery test", "cmdTestBatteryStartLow": "Battery test until low", "cmdTestBatteryStartDeep": "Start deep battery test", "cmdTestSystemStart": "Start system test", "cmdBypassStart": "Switch to bypass mode", "cmdBypassStop": "Leave bypass mode", "cmdResetInputMinmax": "Reset input min/max", "cmdResetWatchdog": "Reset watchdog timer", "cmdBeeperToggle": "Toggle beeper", "cmdOutletLoadOff": "Turn off outlet", "cmdOutletLoadOn": "Turn on outlet", "cmdOutletLoadCycle": "Power cycle outlet", "flagTesting": "Testing", "flagOverheat": "Overheated", "upsCountTotal": "UPS devices found", "upsCountReachable": "UPS devices reachable", "upsAllReachable": "All UPS devices reachable", "sev0": "OK", "sev1": "Info", "sev2": "Warning", "sev3": "Critical", "sev4": "Emergency", "valCharging": "Charging", "valDischarging": "Discharging", "valFloating": "Float charging", "valResting": "Resting", "valEnabled": "Enabled", "valDisabled": "Disabled", "valMuted": "Muted", "valOn": "On", "valOff": "Off", "valGood": "Good", "valWarningLow": "Warning: low", "valWarningHigh": "Warning: high", "valCriticalLow": "Critical: low", "valCriticalHigh": "Critical: high", "valOutOfRange": "Out of range", "valOpen": "Open", "valClosed": "Closed", "valActive": "Active", "valInactive": "Inactive", "valUps": "UPS", "valPdu": "Power distribution unit", "valScd": "Solar controller", "valPsu": "Power supply", "valAts": "Transfer switch", "descChannelBattery": "Readings of the UPS battery", "descChannelDevice": "Identity of the device as reported by the driver", "descChannelDriver": "The NUT driver talking to this UPS", "descChannelInput": "Mains side: what the UPS receives", "descChannelOutput": "Load side: what the UPS delivers", "descChannelUps": "The UPS itself: load, power and its own settings", "descChannelOutlet": "Switchable sockets and socket groups", "descChannelAmbient": "Readings of a connected environment sensor", "descChannelStatus": "The UPS status, split into individual flags", "descChannelCommands": "Buttons that send a command to the UPS", "descChannelUpsInfo": "How this adapter sees the UPS", "descUpsReachable": "The UPS answered the last poll", "descUpsLastNotify": "Last upsmon event routed to this UPS", "descStatusRaw": "The status exactly as the UPS reports it", "descStatusDisplay": "The same status in words, for a display or a message", "descStatusSeverity": "How serious the power situation is: 0 fine, 4 shutdown imminent; empty while the UPS does not say where its power comes from", "descFlagOnline": "The UPS runs on mains power", "descFlagOnBattery": "Mains power is gone — the battery is carrying the load", "descFlagLowBattery": "The battery is nearly empty — shutdown is close", "descFlagHighBattery": "The battery voltage is above its normal range", "descFlagReplaceBattery": "The UPS asks for a new battery — it failed its own test", "descFlagCharging": "The battery is being charged", "descFlagDischarging": "The battery is being drained", "descFlagBypass": "The load is fed straight from the mains — the UPS is not protecting it", "descFlagCalibrating": "The UPS is measuring its battery to re-learn the runtime", "descFlagOff": "The UPS output is switched off — connected devices have no power", "descFlagOverloaded": "More is drawn than the UPS can deliver", "descFlagTrimming": "Mains voltage is too high — the UPS is lowering it", "descFlagBoosting": "Mains voltage is too low — the UPS is raising it", "descFlagForcedShutdown": "Shutdown has been ordered — connected systems should power down now", "descFlagAlarm": "The UPS raised an alarm of its own", "descFlagWaiting": "The server has not heard from the driver yet", "descFlagEcoMode": "Energy-saving mode: the UPS filters less to waste less", "descFlagTesting": "A self-test is running", "descFlagOverheat": "The UPS is too hot", "descBatteryCharge": "How full the battery is right now", "descBatteryChargeLow": "Below this level the UPS reports a low battery", "descBatteryRuntime": "Estimated time the battery still carries the current load", "descBatteryType": "Battery chemistry, e.g. PbAc for lead-acid", "descBatteryChargerStatus": "What the charger is doing — some UPSes report this instead of the charging flags", "descDeviceType": "What kind of device this is — a UPS, a power strip, a transfer switch", "descDriverFlagIgnorelb": "The driver ignores the UPS's own low-battery signal and uses its own threshold", "descDriverParameterPollfreq": "How often the driver reads the full variable set from the UPS", "descDriverParameterPollinterval": "How often the driver checks the UPS status — the fastest any value can change", "descInputTransferHigh": "Above this mains voltage the UPS switches to battery", "descInputTransferLow": "Below this mains voltage the UPS switches to battery", "descInputVoltage": "Mains voltage arriving at the UPS", "descInputFrequency": "Mains frequency arriving at the UPS", "descInputVoltageExtended": "The UPS tolerates a wider mains range before switching to battery", "descOutputVoltage": "Voltage the UPS delivers to the connected devices", "descOutputVoltageNominal": "The voltage this UPS is built for", "descOutputFrequencyNominal": "The frequency this UPS is built for", "descUpsStatus": "The raw status tokens — the parsed flags live under status", "descUpsLoad": "How much of the UPS capacity the connected devices use", "descUpsPower": "Apparent power drawn from the UPS", "descUpsRealpower": "Actual power drawn from the UPS — this is what the meter counts", "descUpsPowerNominal": "What this UPS is rated to deliver", "descUpsDelayShutdown": "How long the UPS waits after a shutdown command before cutting the load", "descUpsDelayStart": "How long the UPS waits after mains return before powering the load again", "descUpsTimerShutdown": "Countdown to switching the load off — empty when none is running", "descUpsTimerStart": "Countdown to switching the load back on — empty when none is running", "descUpsBeeperStatus": "Whether the UPS is allowed to beep on events", "descUpsTemperature": "Temperature inside the UPS", "descOutletSwitchable": "Whether this socket can be switched separately", "descOutletStatus": "Whether this socket currently supplies power", "descAmbientTemperature": "Room temperature at the connected sensor", "descAmbientHumidity": "Room humidity at the connected sensor", "descCmdBeeperEnable": "Let the UPS beep on events again", "descCmdBeeperDisable": "Silence the UPS permanently", "descCmdBeeperMute": "Silence the current alarm only", "descCmdBeeperToggle": "Switch the beeper the other way round", "descCmdLoadOn": "Power the connected devices back on", "descCmdLoadOff": "⚠ Cut power to the connected devices immediately", "descCmdLoadOnDelay": "Power the devices back on after the configured start delay", "descCmdLoadOffDelay": "⚠ Cut power to the devices after the configured shutdown delay", "descCmdShutdownReturn": "⚠ Shut the load down and switch it on again when mains returns", "descCmdShutdownStayoff": "⚠ Shut the load down and leave it off until switched on by hand", "descCmdShutdownStop": "Call off a shutdown that is counting down", "descCmdShutdownReboot": "⚠ Switch the load off and on again", "descCmdShutdownRebootGraceful": "⚠ Restart the load, giving connected systems time to shut down first", "descCmdShutdownDefault": "⚠ Run the shutdown the UPS is configured for", "descCmdTestBatteryStart": "Start a battery test", "descCmdTestBatteryStartQuick": "Start a short battery test", "descCmdTestBatteryStartDeep": "Start a full battery test — this drains the battery", "descCmdTestBatteryStartLow": "Test the battery down to its low-battery point", "descCmdTestBatteryStop": "Stop the running battery test", "descCmdTestPanelStart": "Light up the front panel so you can check it", "descCmdTestPanelStop": "End the panel test", "descCmdTestFailureStart": "Simulate a power failure to see whether everything reacts", "descCmdTestFailureStop": "End the simulated power failure", "descCmdTestSystemStart": "Run the UPS's own overall self-test", "descCmdCalibrateStart": "Re-learn the runtime — the UPS drains and recharges the battery for it", "descCmdCalibrateStop": "Stop the running calibration", "descCmdBypassStart": "⚠ Feed the load straight from the mains — the UPS stops protecting it", "descCmdBypassStop": "Put the load back behind the UPS", "descCmdResetInputMinmax": "Clear the recorded minimum and maximum input values", "descCmdResetWatchdog": "Tell the UPS the system is still alive", "descChannelInfo": "How this adapter is doing", "descConnectionStatus": "The adapter is talking to the NUT server — this does not say whether the credentials are accepted", "descUpsCountTotal": "How many UPS devices the NUT server offers", "descUpsCountReachable": "How many of them answered the last poll", "descUpsAllReachable": "One line to watch instead of every device — false while nothing was found at all", "descNotifyTrigger": "Write here to poll at once — upsmon can push its events into this state", "testHostRequired": "Enter the NUT server host first", "testTls": "via TLS", "testPlain": "unencrypted", "testConnectedLoggedIn": "Connected %s, logged in as \"%s\" — %s UPS(es): %s", "testConnectedNoCreds": "Connected %s — %s UPS(es): %s (no credentials configured)", "testConnectedNoUps": "Connected %s — the server lists no UPS, so the credentials could not be checked", "testConnectedAuthRejected": "Connected %s, but the NUT server rejected the credentials for \"%s\" — reading works, switching and writing will be refused. %s UPS(es): %s", "testFailed": "Connection test failed: %s", "descBatteryChargeApprox": "A rough estimate of the charge, not a measured value — some UPS models only report a range", "descBatteryChargeRestart": "The UPS only switches the load back on once the battery has reached this charge level", "descBatteryChargeWarning": "Charge level at which the UPS reports a warning — earlier than the low-battery threshold", "descBatteryAlarmThreshold": "Charge level below which the UPS raises a battery alarm", "descBatteryCapacity": "Nominal battery capacity in ampere-hours — how much energy the pack can store", "descBatteryCapacityNominal": "Capacity the battery had when new — compare it with the current capacity to judge ageing", "descBatteryChargerType": "Charging method the UPS uses, e.g. ABM or constant trickle charging", "descBatteryCurrent": "Current flowing into or out of the battery — negative while discharging", "descBatteryCurrentTotal": "Total current across all battery packs together", "descBatteryEnergysave": "Energy-saving mode: the UPS switches itself off on battery once the load is negligible", "descBatteryEnergysaveDelay": "How long the load must stay below the energy-saving threshold before the UPS switches off", "descBatteryEnergysaveLoad": "Load below which the energy-saving shutdown starts counting", "descBatteryEnergysaveRealpower": "Active power below which the energy-saving shutdown starts counting", "descBatteryPacks": "How many battery packs the UPS is fitted with", "descBatteryPacksBad": "How many of the battery packs the UPS considers faulty", "descBatteryPacksExternal": "How many of the battery packs are external add-on modules", "descBatteryProtection": "Deep-discharge protection — the UPS cuts off before the battery is damaged", "descBatteryRuntimeLow": "Remaining runtime at which the UPS reports a low battery", "descBatteryRuntimeRestart": "Runtime the battery must have again before the UPS switches the load back on", "descBatteryDateMaintenance": "When the battery is due for its next change or maintenance", "descBatteryTemperatureCellMax": "Highest cell temperature in the pack — a large spread points at an ageing cell", "descBatteryTemperatureCellMin": "Lowest cell temperature in the pack — compare it with the maximum", "descBatteryVoltageCellMax": "Highest cell voltage in the pack — a large spread points at an unbalanced cell", "descBatteryVoltageCellMin": "Lowest cell voltage in the pack — compare it with the maximum", "descBatteryVoltageHigh": "Voltage at which the battery counts as fully charged", "descBatteryVoltageLow": "Voltage at which the battery counts as empty", "descBatteryVoltageNominal": "Rated battery voltage — the design value, not the current reading", "descDeviceMacaddr": "Network address of the UPS management card", "descDevicePart": "Manufacturer's part number — needed when ordering a replacement", "descDeviceUptime": "How long the device has been running without a restart", "descDeviceUsbVersion": "USB protocol version the device speaks — useful when a driver misbehaves", "descDeviceCount": "How many devices this driver reports — more than one on a daisy chain", "descDriverState": "What the driver is doing right now, e.g. quiet or updating its readings", "descDriverFlagAllowKillpower": "⚠ Allows the driver to cut the UPS power at the end of a shutdown — read-only here", "descUpsAlarm": "Plain-text alarm from the UPS — empty while there is nothing to report", "descUpsContacts": "State of the UPS's dry contacts, as a hexadecimal bit pattern", "descUpsDelayReboot": "How long the UPS stays off during a reboot before it powers the load again", "descUpsDisplayLanguage": "Language of the UPS's own front-panel display", "descUpsEfficiency": "How much of the drawn power reaches the load — the rest is lost as heat", "descUpsLoadHigh": "Load above which the UPS considers itself overloaded", "descUpsMode": "Operating mode the UPS is running in, e.g. normal, eco or high efficiency", "descUpsRealpowerNominal": "Active power the UPS is rated for, in watts — the limit for the load", "descUpsShutdown": "Whether the UPS will shut down on command — the master switch for shutdown commands", "descUpsStartAuto": "Whether the UPS starts the load again by itself once mains power returns", "descUpsStartBattery": "Whether the UPS may be switched on from battery, without mains power", "descUpsStartReboot": "Whether the UPS restarts the load after a shutdown instead of staying off", "descUpsTestDate": "When the UPS last ran a self-test", "descUpsTestInterval": "How often the UPS tests its battery on its own", "descUpsTestResult": "Outcome of the last battery self-test", "descUpsTimerReboot": "Countdown to the scheduled restart — empty while none is running", "descUpsWatchdogStatus": "Watchdog: the UPS restarts the load if the server stops reporting in", "descVoltageHighCritical": "Upper critical limit for the voltage — above it the device reports a fault", "descVoltageHighWarning": "Upper warning limit for the voltage — above it the device warns", "descVoltageLowCritical": "Lower critical limit for the voltage — below it the device reports a fault", "descVoltageLowWarning": "Lower warning limit for the voltage — below it the device warns", "descVoltageMaximum": "Highest voltage the device has seen since the last reset", "descVoltageMinimum": "Lowest voltage the device has seen since the last reset", "descVoltageNominal": "Rated voltage the device is designed for — not the current reading", "descVoltageStatus": "Whether the voltage is within its limits, or how far outside", "descCurrentHighCritical": "Upper critical limit for the current — above it the device reports a fault", "descCurrentHighWarning": "Upper warning limit for the current — above it the device warns", "descCurrentLowCritical": "Lower critical limit for the current — below it the device reports a fault", "descCurrentLowWarning": "Lower warning limit for the current — below it the device warns", "descCurrentMaximum": "Highest current the device has seen since the last reset", "descCurrentMinimum": "Lowest current the device has seen since the last reset", "descCurrentPeak": "Highest short current peak the device has measured", "descCurrentStatus": "Whether the current is within its limits, or how far outside", "descInputFrequencyNominal": "Rated frequency the device is designed for — not the current reading", "descInputFrequencyStatus": "Whether the frequency is within its limits, or how far outside", "descInputPhases": "How many phases the mains feed has — 1 for a household socket, 3 for three-phase", "descOutputPhases": "How many phases the UPS delivers to the load", "descInputPhaseShift": "Angle between the phases — 120° is the normal value in a healthy three-phase feed", "descInputQuality": "How clean the incoming mains is, as the UPS judges it", "descInputSensitivity": "How readily the UPS switches to battery — lower sensitivity tolerates a noisier mains", "descInputSource": "Which supply the UPS is drawing from right now", "descInputSourcePreferred": "Which supply the UPS uses when it has the choice", "descInputRealpower": "Active power drawn from the mains, in watts", "descInputRealpowerNominal": "Active power the input is rated for, in watts", "descInputLoad": "How much of the input's rated capacity is being used", "descInputPower": "Apparent power drawn from the mains, in volt-amperes", "descInputEcoSwitchable": "Whether eco mode can be switched on for this input", "descInputFeedColor": "Colour code of the feed cable — helps identify it in the rack", "descInputFeedDesc": "Name of the feed this input is connected to", "descInputFrequencyExtended": "Whether the UPS accepts a wider frequency band than the standard one", "descInputFrequencyHigh": "Highest mains frequency the UPS still accepts before switching to battery", "descInputFrequencyLow": "Lowest mains frequency the UPS still accepts before switching to battery", "descInputFrequencyNominalRange": "How far the frequency may stray from its rated value, as a percentage", "descFrequencyNominal": "Rated mains frequency — 50 Hz in Europe, 60 Hz in North America", "descOutputCurrent": "Current the UPS is delivering to the load", "descOutputCurrentNominal": "Current the output is rated for — the limit for the connected load", "descOutputFrequency": "Frequency the UPS delivers — on battery it generates this itself", "descOutputPower": "Apparent power delivered to the load, in volt-amperes", "descOutputInverterLatency": "How long the inverter needs to take over when the mains fails", "descInputBypassVoltage": "Voltage on the bypass line — the path that feeds the load past the inverter", "descInputBypassFrequency": "Frequency on the bypass line — must match before the UPS may switch over", "descInputBypassSwitchable": "Whether the load can be moved to the bypass line at all", "descInputBypassSwitchOn": "⚠ Moves the load onto the bypass line — it then runs unprotected on raw mains", "descInputBypassSwitchOff": "Takes the load off the bypass line and back onto the inverter", "descInputTransferDelay": "How long a mains fault must last before the UPS switches over", "descInputTransferReason": "Why the UPS last switched to battery", "descInputTransferHysteresis": "Gap between switching over and switching back, so the UPS does not oscillate", "descInputTransferHighMax": "Highest value the upper transfer threshold may be set to", "descInputTransferHighMin": "Lowest value the upper transfer threshold may be set to", "descInputTransferLowMax": "Highest value the lower transfer threshold may be set to", "descInputTransferLowMin": "Lowest value the lower transfer threshold may be set to", "descInputTransferBoostHigh": "Above this voltage the UPS stops boosting a low mains", "descInputTransferBoostLow": "Below this voltage the UPS starts boosting a low mains instead of switching to battery", "descInputTransferTrimHigh": "Above this voltage the UPS starts trimming a high mains instead of switching to battery", "descInputTransferTrimLow": "Below this voltage the UPS stops trimming a high mains", "descInputTransferBypassHigh": "Above this voltage the bypass line is no longer considered usable", "descInputTransferBypassLow": "Below this voltage the bypass line is no longer considered usable", "descInputTransferBypassForced": "Whether the UPS may move the load to the bypass even when conditions are poor", "descInputTransferBypassOverload": "Whether the UPS moves the load to the bypass when it is overloaded", "descInputTransferBypassOutlimits": "Whether the UPS moves the load to the bypass when its output leaves the allowed range", "descInputTransferFrequencyBypassRange": "How far the frequency may stray before the bypass is refused, as a percentage", "descInputTransferFrequencyEcoRange": "How far the frequency may stray before eco mode is left, as a percentage", "descInputTransferEcoHigh": "Above this voltage the UPS leaves eco mode and runs the load through the inverter", "descInputTransferEcoLow": "Below this voltage the UPS leaves eco mode and runs the load through the inverter", "descOutletCount": "How many switchable outlets this device has", "descOutletId": "Number of this outlet as the device counts it", "descOutletDesc": "Name the device carries for this outlet — often set by the user", "descOutletCurrent": "Current drawn through this outlet", "descOutletDelayShutdown": "How long the device waits before it switches this outlet off", "descOutletGroupId": "Number of this outlet group as the device counts it", "descOutletGroupStatus": "Whether this whole group of outlets is switched on", "descOutletGroupType": "What kind of group this is, e.g. a switchable section or a whole rack", "descAmbientPresent": "Whether this environment sensor is actually connected", "descAmbientTemperatureStatus": "Whether the measured temperature is within its limits, or how far outside", "descAmbientHumidityAlarm": "Whether an alarm is armed for the humidity of this sensor", "descAmbientContactsStatus": "State of this dry contact — open or closed, or active relative to its configuration", "descPowerMaximum": "Highest apparent power the device has seen since the last reset", "descPowerMinimum": "Lowest apparent power the device has seen since the last reset", "descPowerPercent": "Current apparent power as a share of the rating", "descPowerMaximumPercent": "Highest apparent power since the last reset, as a share of the rating", "descPowerMinimumPercent": "Lowest apparent power since the last reset, as a share of the rating", "descInputCurrent": "Current the UPS draws from the mains", "descBatteryVoltage": "Voltage at the battery — it drops as the battery discharges", "descBatteryTemperature": "Temperature measured at the battery", "descBatteryStatus": "Health of the battery as the driver reports it — not the UPS status", "descCmdOutletLoadOff": "⚠ Cut power to this outlet immediately", "descCmdOutletLoadOn": "Switch this outlet back on", "descCmdOutletLoadCycle": "⚠ Switch this outlet off and on again", "descBatteryDate": "When the battery was installed or last replaced — not when it was manufactured", "descUpsDate": "Date of the UPS's own clock — it can differ from the server's", "descUpsTime": "Time of the UPS's own clock — it can differ from the server's", "descUpsType": "How the manufacturer labels this UPS, e.g. offline — free text, unlike the device type", "descDriverVersion": "Version of the NUT release this driver was built from", "descDriverVersionInternal": "The driver's own version, counted apart from the NUT release", "descDriverVersionData": "Version of the data mapping a generic driver uses for this model", "descUpsId": "Name an administrator stored in the UPS itself — not the serial number", "descUpsVendorid": "USB vendor ID the device reports, in hexadecimal", "descUpsProductid": "USB product ID the device reports, in hexadecimal", "commandsExecute": "Run command with parameter", "descCommandsExecute": "Write a command the UPS offers and, if needed, its value, e.g. load.off.delay 120 — the same form upscmd takes", "descSpecAlarm": "Alarm text for this line, as the device also publishes it in ups.alarm", "descSpecCurrent": "Current flowing on this line right now", "descSpecVoltage": "Voltage on this line right now", "descSpecPower": "Apparent power on this line right now, in volt-amperes", "descSpecRealpower": "Active power on this line right now, in watts — what is actually consumed", "descSpecPowerfactor": "Ratio of active to apparent power, between 0 and 1 — the closer to 1, the less reactive load", "descSpecCrestfactor": "Ratio of peak to effective value of the current, 1 or more — high values mean a strongly distorted load", "descSpecLoad": "How much of this line's rated capacity is being used", "descSpecFrequency": "Frequency on this line right now", "descCurrentNominal": "Rated current the device is designed for — not the current reading", "descTemperatureHighWarning": "Upper warning limit for the temperature — above it the sensor warns", "descTemperatureHighCritical": "Upper critical limit for the temperature — above it the sensor raises an alarm", "descTemperatureLowWarning": "Lower warning limit for the temperature — below it the sensor warns", "descTemperatureLowCritical": "Lower critical limit for the temperature — below it the sensor raises an alarm", "descTemperatureHigh": "Upper temperature limit of this sensor — above it the sensor raises an alarm", "descTemperatureLow": "Lower temperature limit of this sensor — below it the sensor raises an alarm", "descTemperatureMaximum": "Highest temperature the sensor has measured since the last reset", "descTemperatureMinimum": "Lowest temperature the sensor has measured since the last reset", "descHumidityHighWarning": "Upper warning limit for the humidity — above it the sensor warns", "descHumidityHighCritical": "Upper critical limit for the humidity — above it the sensor raises an alarm", "descHumidityLowWarning": "Lower warning limit for the humidity — below it the sensor warns", "descHumidityLowCritical": "Lower critical limit for the humidity — below it the sensor raises an alarm", "descHumidityHigh": "Upper humidity limit of this sensor — above it the sensor raises an alarm", "descHumidityLow": "Lower humidity limit of this sensor — below it the sensor raises an alarm", "descHumidityMaximum": "Highest humidity the sensor has measured since the last reset", "descHumidityMinimum": "Lowest humidity the sensor has measured since the last reset", "descHumidityStatus": "Whether the measured humidity is within its limits, or how far outside", "input.alarm": "Input: alarm", "input.current.maximum": "Input: maximum current", "input.current.minimum": "Input: minimum current", "input.current.peak": "Input: peak current", "input.power.maximum": "Input: maximum apparent power", "input.power.minimum": "Input: minimum apparent power", "input.power.percent": "Input: load share (apparent power)", "input.power.maximum.percent": "Input: maximum load share", "input.power.minimum.percent": "Input: minimum load share", "input.powerfactor": "Input: power factor", "input.crestfactor": "Input: crest factor", "input.bypass.alarm": "Bypass input: alarm", "input.bypass.current": "Bypass input: current", "input.bypass.current.maximum": "Bypass input: maximum current", "input.bypass.current.minimum": "Bypass input: minimum current", "input.bypass.current.status": "Bypass input: current status", "input.bypass.current.low.warning": "Bypass input: current warning threshold (low)", "input.bypass.current.low.critical": "Bypass input: current critical threshold (low)", "input.bypass.current.high.warning": "Bypass input: current warning threshold (high)", "input.bypass.current.high.critical": "Bypass input: current critical threshold (high)", "input.bypass.current.peak": "Bypass input: peak current", "input.bypass.voltage.nominal": "Bypass input: nominal voltage", "input.bypass.voltage.maximum": "Bypass input: maximum voltage", "input.bypass.voltage.minimum": "Bypass input: minimum voltage", "input.bypass.voltage.status": "Bypass input: voltage status", "input.bypass.voltage.low.warning": "Bypass input: voltage warning threshold (low)", "input.bypass.voltage.low.critical": "Bypass input: voltage critical threshold (low)", "input.bypass.voltage.high.warning": "Bypass input: voltage warning threshold (high)", "input.bypass.voltage.high.critical": "Bypass input: voltage critical threshold (high)", "input.bypass.power": "Bypass input: apparent power", "input.bypass.power.maximum": "Bypass input: maximum apparent power", "input.bypass.power.minimum": "Bypass input: minimum apparent power", "input.bypass.power.percent": "Bypass input: load share (apparent power)", "input.bypass.power.maximum.percent": "Bypass input: maximum load share", "input.bypass.power.minimum.percent": "Bypass input: minimum load share", "input.bypass.realpower": "Bypass input: active power", "input.bypass.powerfactor": "Bypass input: power factor", "input.bypass.crestfactor": "Bypass input: crest factor", "input.bypass.load": "Bypass input: load", "input.bypass.frequency.nominal": "Bypass input: nominal frequency", "input.servicebypass.alarm": "Service bypass input: alarm", "input.servicebypass.current": "Service bypass input: current", "input.servicebypass.current.maximum": "Service bypass input: maximum current", "input.servicebypass.current.minimum": "Service bypass input: minimum current", "input.servicebypass.current.status": "Service bypass input: current status", "input.servicebypass.current.low.warning": "Service bypass input: current warning threshold (low)", "input.servicebypass.current.low.critical": "Service bypass input: current critical threshold (low)", "input.servicebypass.current.high.warning": "Service bypass input: current warning threshold (high)", "input.servicebypass.current.high.critical": "Service bypass input: current critical threshold (high)", "input.servicebypass.current.peak": "Service bypass input: peak current", "input.servicebypass.voltage": "Service bypass input: voltage", "input.servicebypass.voltage.nominal": "Service bypass input: nominal voltage", "input.servicebypass.voltage.maximum": "Service bypass input: maximum voltage", "input.servicebypass.voltage.minimum": "Service bypass input: minimum voltage", "input.servicebypass.voltage.status": "Service bypass input: voltage status", "input.servicebypass.voltage.low.warning": "Service bypass input: voltage warning threshold (low)", "input.servicebypass.voltage.low.critical": "Service bypass input: voltage critical threshold (low)", "input.servicebypass.voltage.high.warning": "Service bypass input: voltage warning threshold (high)", "input.servicebypass.voltage.high.critical": "Service bypass input: voltage critical threshold (high)", "input.servicebypass.power": "Service bypass input: apparent power", "input.servicebypass.power.maximum": "Service bypass input: maximum apparent power", "input.servicebypass.power.minimum": "Service bypass input: minimum apparent power", "input.servicebypass.power.percent": "Service bypass input: load share (apparent power)", "input.servicebypass.power.maximum.percent": "Service bypass input: maximum load share", "input.servicebypass.power.minimum.percent": "Service bypass input: minimum load share", "input.servicebypass.realpower": "Service bypass input: active power", "input.servicebypass.powerfactor": "Service bypass input: power factor", "input.servicebypass.crestfactor": "Service bypass input: crest factor", "input.servicebypass.load": "Service bypass input: load", "input.servicebypass.frequency": "Service bypass input: frequency", "input.servicebypass.frequency.nominal": "Service bypass input: nominal frequency", "output.alarm": "Output: alarm", "output.current.maximum": "Output: maximum current", "output.current.minimum": "Output: minimum current", "output.current.status": "Output: current status", "output.current.low.warning": "Output: current warning threshold (low)", "output.current.low.critical": "Output: current critical threshold (low)", "output.current.high.warning": "Output: current warning threshold (high)", "output.current.high.critical": "Output: current critical threshold (high)", "output.current.peak": "Output: peak current", "output.voltage.maximum": "Output: maximum voltage", "output.voltage.minimum": "Output: minimum voltage", "output.voltage.status": "Output: voltage status", "output.voltage.low.warning": "Output: voltage warning threshold (low)", "output.voltage.low.critical": "Output: voltage critical threshold (low)", "output.voltage.high.warning": "Output: voltage warning threshold (high)", "output.voltage.high.critical": "Output: voltage critical threshold (high)", "output.power.maximum": "Output: maximum apparent power", "output.power.minimum": "Output: minimum apparent power", "output.power.percent": "Output: load share (apparent power)", "output.power.maximum.percent": "Output: maximum load share", "output.power.minimum.percent": "Output: minimum load share", "output.realpower": "Output: active power", "output.powerfactor": "Output: power factor", "output.crestfactor": "Output: crest factor", "output.load": "Output: load", "output.bypass.alarm": "Bypass output: alarm", "output.bypass.current": "Bypass output: current", "output.bypass.current.maximum": "Bypass output: maximum current", "output.bypass.current.minimum": "Bypass output: minimum current", "output.bypass.current.status": "Bypass output: current status", "output.bypass.current.low.warning": "Bypass output: current warning threshold (low)", "output.bypass.current.low.critical": "Bypass output: current critical threshold (low)", "output.bypass.current.high.warning": "Bypass output: current warning threshold (high)", "output.bypass.current.high.critical": "Bypass output: current critical threshold (high)", "output.bypass.current.peak": "Bypass output: peak current", "output.bypass.voltage": "Bypass output: voltage", "output.bypass.voltage.nominal": "Bypass output: nominal voltage", "output.bypass.voltage.maximum": "Bypass output: maximum voltage", "output.bypass.voltage.minimum": "Bypass output: minimum voltage", "output.bypass.voltage.status": "Bypass output: voltage status", "output.bypass.voltage.low.warning": "Bypass output: voltage warning threshold (low)", "output.bypass.voltage.low.critical": "Bypass output: voltage critical threshold (low)", "output.bypass.voltage.high.warning": "Bypass output: voltage warning threshold (high)", "output.bypass.voltage.high.critical": "Bypass output: voltage critical threshold (high)", "output.bypass.power": "Bypass output: apparent power", "output.bypass.power.maximum": "Bypass output: maximum apparent power", "output.bypass.power.minimum": "Bypass output: minimum apparent power", "output.bypass.power.percent": "Bypass output: load share (apparent power)", "output.bypass.power.maximum.percent": "Bypass output: maximum load share", "output.bypass.power.minimum.percent": "Bypass output: minimum load share", "output.bypass.realpower": "Bypass output: active power", "output.bypass.powerfactor": "Bypass output: power factor", "output.bypass.crestfactor": "Bypass output: crest factor", "output.bypass.load": "Bypass output: load", "output.bypass.frequency": "Bypass output: frequency", "output.bypass.frequency.nominal": "Bypass output: nominal frequency", "output.inverter.alarm": "Inverter output: alarm", "output.inverter.current": "Inverter output: current", "output.inverter.current.maximum": "Inverter output: maximum current", "output.inverter.current.minimum": "Inverter output: minimum current", "output.inverter.current.status": "Inverter output: current status", "output.inverter.current.low.warning": "Inverter output: current warning threshold (low)", "output.inverter.current.low.critical": "Inverter output: current critical threshold (low)", "output.inverter.current.high.warning": "Inverter output: current warning threshold (high)", "output.inverter.current.high.critical": "Inverter output: current critical threshold (high)", "output.inverter.current.peak": "Inverter output: peak current", "output.inverter.voltage": "Inverter output: voltage", "output.inverter.voltage.nominal": "Inverter output: nominal voltage", "output.inverter.voltage.maximum": "Inverter output: maximum voltage", "output.inverter.voltage.minimum": "Inverter output: minimum voltage", "output.inverter.voltage.status": "Inverter output: voltage status", "output.inverter.voltage.low.warning": "Inverter output: voltage warning threshold (low)", "output.inverter.voltage.low.critical": "Inverter output: voltage critical threshold (low)", "output.inverter.voltage.high.warning": "Inverter output: voltage warning threshold (high)", "output.inverter.voltage.high.critical": "Inverter output: voltage critical threshold (high)", "output.inverter.power": "Inverter output: apparent power", "output.inverter.power.maximum": "Inverter output: maximum apparent power", "output.inverter.power.minimum": "Inverter output: minimum apparent power", "output.inverter.power.percent": "Inverter output: load share (apparent power)", "output.inverter.power.maximum.percent": "Inverter output: maximum load share", "output.inverter.power.minimum.percent": "Inverter output: minimum load share", "output.inverter.realpower": "Inverter output: active power", "output.inverter.powerfactor": "Inverter output: power factor", "output.inverter.crestfactor": "Inverter output: crest factor", "output.inverter.load": "Inverter output: load", "output.inverter.frequency": "Inverter output: frequency", "output.inverter.frequency.nominal": "Inverter output: nominal frequency", "output.servicebypass.alarm": "Service bypass output: alarm", "output.servicebypass.current": "Service bypass output: current", "output.servicebypass.current.maximum": "Service bypass output: maximum current", "output.servicebypass.current.minimum": "Service bypass output: minimum current", "output.servicebypass.current.status": "Service bypass output: current status", "output.servicebypass.current.low.warning": "Service bypass output: current warning threshold (low)", "output.servicebypass.current.low.critical": "Service bypass output: current critical threshold (low)", "output.servicebypass.current.high.warning": "Service bypass output: current warning threshold (high)", "output.servicebypass.current.high.critical": "Service bypass output: current critical threshold (high)", "output.servicebypass.current.peak": "Service bypass output: peak current", "output.servicebypass.voltage": "Service bypass output: voltage", "output.servicebypass.voltage.nominal": "Service bypass output: nominal voltage", "output.servicebypass.voltage.maximum": "Service bypass output: maximum voltage", "output.servicebypass.voltage.minimum": "Service bypass output: minimum voltage", "output.servicebypass.voltage.status": "Service bypass output: voltage status", "output.servicebypass.voltage.low.warning": "Service bypass output: voltage warning threshold (low)", "output.servicebypass.voltage.low.critical": "Service bypass output: voltage critical threshold (low)", "output.servicebypass.voltage.high.warning": "Service bypass output: voltage warning threshold (high)", "output.servicebypass.voltage.high.critical": "Service bypass output: voltage critical threshold (high)", "output.servicebypass.power": "Service bypass output: apparent power", "output.servicebypass.power.maximum": "Service bypass output: maximum apparent power", "output.servicebypass.power.minimum": "Service bypass output: minimum apparent power", "output.servicebypass.power.percent": "Service bypass output: load share (apparent power)", "output.servicebypass.power.maximum.percent": "Service bypass output: maximum load share", "output.servicebypass.power.minimum.percent": "Service bypass output: minimum load share", "output.servicebypass.realpower": "Service bypass output: active power", "output.servicebypass.powerfactor": "Service bypass output: power factor", "output.servicebypass.crestfactor": "Service bypass output: crest factor", "output.servicebypass.load": "Service bypass output: load", "output.servicebypass.frequency": "Service bypass output: frequency", "output.servicebypass.frequency.nominal": "Service bypass output: nominal frequency", "outlet.current.maximum": "Outlet: maximum current", "outlet.current.status": "Outlet: current status", "outlet.current.low.warning": "Outlet: current warning threshold (low)", "outlet.current.low.critical": "Outlet: current critical threshold (low)", "outlet.current.high.warning": "Outlet: current warning threshold (high)", "outlet.current.high.critical": "Outlet: current critical threshold (high)", "outlet.voltage": "Outlet: voltage", "outlet.voltage.status": "Outlet: voltage status", "outlet.voltage.low.warning": "Outlet: voltage warning threshold (low)", "outlet.voltage.low.critical": "Outlet: voltage critical threshold (low)", "outlet.voltage.high.warning": "Outlet: voltage warning threshold (high)", "outlet.voltage.high.critical": "Outlet: voltage critical threshold (high)", "outlet.power": "Outlet: apparent power", "outlet.realpower": "Outlet: active power", "outlet.powerfactor": "Outlet: power factor", "outlet.crestfactor": "Outlet: crest factor", "outlet.group.alarm": "Outlet group: alarm", "outlet.group.current": "Outlet group: current", "outlet.group.current.nominal": "Outlet group: nominal current", "outlet.group.current.status": "Outlet group: current status", "outlet.group.current.low.warning": "Outlet group: current warning threshold (low)", "outlet.group.current.low.critical": "Outlet group: current critical threshold (low)", "outlet.group.current.high.warning": "Outlet group: current warning threshold (high)", "outlet.group.current.high.critical": "Outlet group: current critical threshold (high)", "outlet.group.voltage": "Outlet group: voltage", "outlet.group.voltage.status": "Outlet group: voltage status", "outlet.group.voltage.low.warning": "Outlet group: voltage warning threshold (low)", "outlet.group.voltage.low.critical": "Outlet group: voltage critical threshold (low)", "outlet.group.voltage.high.warning": "Outlet group: voltage warning threshold (high)", "outlet.group.voltage.high.critical": "Outlet group: voltage critical threshold (high)", "outlet.group.power": "Outlet group: apparent power", "outlet.group.realpower": "Outlet group: active power", "outlet.group.powerfactor": "Outlet group: power factor", "outlet.group.load": "Outlet group: load", "ambient.count": "Sensor count", "descAmbientCount": "How many environment sensors are connected to this device", "ambient.name": "Sensor name", "ambient.id": "Sensor ID", "descAmbientId": "Unique identifier the device uses for this sensor", "ambient.address": "Sensor address", "descAmbientAddress": "Position of this sensor on the device's sensor bus", "ambient.parent.serial": "Parent device serial number", "descAmbientParentSerial": "Serial number of the device this sensor is connected to — tells sensors of several PDUs apart", "ambient.mfr": "Sensor manufacturer", "ambient.model": "Sensor model", "ambient.firmware": "Sensor firmware", "ambient.temperature.alarm": "Temperature alarm", "descAmbientTemperatureAlarm": "Whether an alarm is armed for the temperature of this sensor", "ambient.temperature.high": "Temperature limit (high)", "ambient.temperature.low": "Temperature limit (low)", "ambient.temperature.high.warning": "Temperature warning threshold (high)", "ambient.temperature.high.critical": "Temperature critical threshold (high)", "ambient.temperature.low.warning": "Temperature warning threshold (low)", "ambient.temperature.low.critical": "Temperature critical threshold (low)", "ambient.temperature.maximum": "Maximum temperature", "ambient.temperature.minimum": "Minimum temperature", "ambient.humidity.status": "Humidity status", "ambient.humidity.high": "Humidity limit (high)", "ambient.humidity.low": "Humidity limit (low)", "ambient.humidity.high.warning": "Humidity warning threshold (high)", "ambient.humidity.high.critical": "Humidity critical threshold (high)", "ambient.humidity.low.warning": "Humidity warning threshold (low)", "ambient.humidity.low.critical": "Humidity critical threshold (low)", "ambient.humidity.maximum": "Maximum humidity", "ambient.humidity.minimum": "Minimum humidity", "ambient.contacts.config": "Contact configuration", "descAmbientContactsConfig": "How this dry contact is wired — normally open or normally closed; the status is read against it", "ambient.contacts.name": "Contact name", "outlet.alarm": "Outlet alarm", "outlet.autoswitch.charge.low": "Switch off at battery charge", "descOutletChargeLow": "On battery, this outlet is switched off once the charge falls to this level — keeps the rest running longer", "outlet.battery.charge.low": "Switch off at battery charge", "outlet.delay.start": "Outlet start delay", "descOutletDelayStart": "How long the device waits before it switches this outlet back on", "outlet.designator": "Outlet designator", "descOutletDesignator": "Label printed on the device next to this outlet", "outlet.ecocontrol": "Eco control", "descOutletEcocontrol": "Whether this outlet follows a master outlet — switched off automatically when the master's device is off", "outlet.groupid": "Outlet group ID", "descOutletGroupid": "Number of the outlet group this outlet belongs to", "outlet.name": "Outlet name", "outlet.protect.status": "Outlet protection", "descOutletProtectStatus": "Whether this outlet is backed by the battery or only protected against surges", "outlet.switch": "Outlet switch", "descOutletSwitch": "Switch this outlet on or off", "outlet.timer.shutdown": "Outlet shutdown countdown", "descOutletTimerShutdown": "Seconds until this outlet switches off — empty while no shutdown is pending", "outlet.timer.start": "Outlet start countdown", "descOutletTimerStart": "Seconds until this outlet switches on — empty while no start is pending", "outlet.type": "Outlet type", "descOutletType": "Physical socket type, e.g. Schuko or IEC C13", "outlet.group.color": "Group colour", "descOutletGroupColor": "Colour code of the outlets in this group — helps find them on the PDU", "outlet.group.count": "Outlets in group", "descOutletGroupCount": "How many outlets this group contains", "outlet.group.input": "Group input", "descOutletGroupInput": "Which input of the PDU feeds this outlet group", "outlet.group.phase": "Group phase", "descOutletGroupPhase": "Mains phase this outlet group is connected to", "outlet.group.name": "Group name", "outlet.group.desc": "Group description", "experimental.ups.mode.buzzwords": "Mode marketing names", "descUpsModeBuzzwords": "The vendor's own names for the operating mode the UPS is in (experimental in NUT)", "cmdLoadCycle": "Power-cycle load", "descCmdLoadCycle": "⚠ Switch the connected devices off and on again", "cmdOutletLoadOffDelay": "Outlet off (delayed)", "descCmdOutletLoadOffDelay": "⚠ Switch this outlet off after the configured delay", "cmdOutletLoadOnDelay": "Outlet on (delayed)", "descCmdOutletLoadOnDelay": "Switch this outlet on after the configured delay", "cmdOutletLoadCycleDelay": "Outlet restart (delayed)", "descCmdOutletLoadCycleDelay": "⚠ Switch this outlet off and on again after the configured delay", "cmdOutletShutdownReturn": "Outlet off, on when power returns", "descCmdOutletShutdownReturn": "⚠ Switch this outlet off and back on when mains power returns", "cmdDriverKillpower": "Driver: cut UPS power", "descCmdDriverKillpower": "⚠ The driver starts the UPS shutdown — only when driver.flag.allow_killpower permits it", "cmdDriverReload": "Driver: reload configuration", "descCmdDriverReload": "The driver reads its configuration again — only some options take effect without a restart", "cmdDriverReloadOrError": "Driver: reload or report", "descCmdDriverReloadOrError": "The driver reads its configuration again and reports an error if a change needs a restart", "cmdDriverReloadOrExit": "Driver: reload or exit", "descCmdDriverReloadOrExit": "⚠ The driver reads its configuration again and exits if a change needs a restart — data stops until it is restarted", "cmdDriverReloadOrRestart": "Driver: reload or restart", "descCmdDriverReloadOrRestart": "The driver reads its configuration again and restarts itself if a change needs it", "cmdDriverExit": "Driver: exit", "descCmdDriverExit": "⚠ The driver exits — no data until the system or a supervisor restarts it", "cmdInputOn": "Connect input", "descCmdInputOn": "Connect the UPS to the mains input again", "cmdInputOff": "Disconnect input", "descCmdInputOff": "⚠ Disconnect the UPS from the mains input — it then runs on battery", "cmdClearFaultRecord": "Clear fault record", "descCmdClearFaultRecord": "Delete the faults and errors the UPS has recorded", "cmdBeeperOn": "Beeper on (obsolete)", "descCmdBeeperOn": "Old form of 'enable beeper' that some drivers still offer", "cmdBeeperOff": "Beeper off (obsolete)", "descCmdBeeperOff": "Old form of 'disable beeper' that some drivers still offer", "cmdEcomodeStart": "Eco mode on", "descCmdEcomodeStart": "Switch the UPS to high-efficiency (eco) mode — the load then runs on the mains, less protected (experimental in NUT)", "cmdEcomodeStop": "Eco mode off", "descCmdEcomodeStop": "Take the UPS out of eco mode (experimental in NUT)", "cmdBypassEcomodeStart": "Bypass, then eco mode", "descCmdBypassEcomodeStart": "⚠ Put the UPS into bypass and then into eco mode (experimental in NUT)", "cmdBypassEcomodeStop": "Leave bypass eco mode", "descCmdBypassEcomodeStop": "Take the UPS out of eco mode after leaving bypass (experimental in NUT)", "cmdEssmodeStart": "Energy saver mode on", "descCmdEssmodeStart": "Switch the UPS to its energy saver system (ESS) mode (experimental in NUT)", "cmdEssmodeStop": "Energy saver mode off", "descCmdEssmodeStop": "Take the UPS out of energy saver system (ESS) mode (experimental in NUT)", "cmdTestBeeperStart": "Start beeper test", "descCmdTestBeeperStart": "Let the UPS sound its beeper as a test (experimental in NUT)", "cmdTestBeeperStop": "Stop beeper test", "descCmdTestBeeperStop": "End a running beeper test (experimental in NUT)", "cmdVeDirectPing": "VE.Direct: ping", "descCmdVeDirectPing": "Check that the Victron device answers on its VE.Direct port (experimental in NUT)", "cmdVeDirectGet": "VE.Direct: read register", "descCmdVeDirectGet": "Read a register of the Victron device — the register goes into commands.execute as the parameter (experimental in NUT)", "cmdVeDirectSet": "VE.Direct: write register", "descCmdVeDirectSet": "⚠ Write a register of the Victron device — register and value go into commands.execute as the parameter (experimental in NUT)", "cmdOutletGroupLoadOff": "Group off", "descCmdOutletGroupLoadOff": "⚠ Switch every outlet of this group off", "cmdOutletGroupLoadOn": "Group on", "descCmdOutletGroupLoadOn": "Switch every outlet of this group on", "cmdOutletGroupLoadCycle": "Group restart", "descCmdOutletGroupLoadCycle": "⚠ Switch every outlet of this group off and on again", "cmdOutletGroupLoadOffDelay": "Group off (delayed)", "descCmdOutletGroupLoadOffDelay": "⚠ Switch every outlet of this group off after the configured delay", "cmdOutletGroupLoadOnDelay": "Group on (delayed)", "descCmdOutletGroupLoadOnDelay": "Switch every outlet of this group on after the configured delay", "cmdOutletGroupLoadCycleDelay": "Group restart (delayed)", "descCmdOutletGroupLoadCycleDelay": "⚠ Switch every outlet of this group off and on again after the configured delay", "ambient.temperature.alarm.enable": "Temperature alarm enabled", "descAmbientTemperatureAlarmEnable": "Whether the temperature alarm of this sensor is switched on", "ambient.temperature.alarm.maximum": "Temperature alarm limit (high)", "descAmbientTemperatureAlarmMaximum": "Highest temperature this sensor accepts — above it the device raises an alarm", "ambient.temperature.alarm.minimum": "Temperature alarm limit (low)", "descAmbientTemperatureAlarmMinimum": "Lowest temperature this sensor accepts — below it the device raises an alarm", "ambient.humidity.alarm.enable": "Humidity alarm enabled", "descAmbientHumidityAlarmEnable": "Whether the humidity alarm of this sensor is switched on", "ambient.humidity.alarm.maximum": "Humidity alarm limit (high)", "descAmbientHumidityAlarmMaximum": "Highest humidity this sensor accepts — above it the device raises an alarm", "ambient.humidity.alarm.minimum": "Humidity alarm limit (low)", "descAmbientHumidityAlarmMinimum": "Lowest humidity this sensor accepts — below it the device raises an alarm", "driver.debug": "Driver debug level", "descDriverDebug": "How verbose the NUT driver's own log is — 0 is normal operation", "outlet.group.delay.shutdown": "Group shutdown delay", "descOutletGroupDelayShutdown": "How long the device waits before it switches this group off", "outlet.group.delay.start": "Group start delay", "descOutletGroupDelayStart": "How long the device waits before it switches this group back on", "outlet.group.delay.reboot": "Group restart duration", "descOutletGroupDelayReboot": "How long the device keeps this group off when it restarts it", "outlet.group.timer.shutdown": "Group shutdown countdown", "descOutletGroupTimerShutdown": "Seconds until this group switches off — empty while no shutdown is pending", "outlet.group.timer.start": "Group start countdown", "descOutletGroupTimerStart": "Seconds until this group switches on — empty while no start is pending", "outlet.group.timer.reboot": "Group restart countdown", "descOutletGroupTimerReboot": "Seconds until this group restarts — empty while no restart is pending", "outlet.delay.reboot": "Outlet restart duration", "descOutletDelayReboot": "How long the device keeps this outlet off when it restarts it", "ups.load.energysave": "Energy-saving load threshold", "descUpsLoadEnergysave": "Load at which the UPS switches to energy saving", "battery.voltage.maximum": "Highest battery voltage", "descBatteryVoltageMaximum": "Highest battery voltage the device has recorded", "battery.voltage.minimum": "Lowest battery voltage", "descBatteryVoltageMinimum": "Lowest battery voltage the device has recorded", "battery.current.maximum": "Highest battery current", "descBatteryCurrentMaximum": "Highest battery current the device has recorded", "battery.current.minimum": "Lowest battery current", "descBatteryCurrentMinimum": "Lowest battery current the device has recorded", "input.id": "Input ID", "descInputId": "Number the device gives this input source", "input.bypass.phases": "Bypass phases", "descInputBypassPhases": "How many phases the bypass feed has — 1 or 3", "input.voltage.fault": "Fault voltage", "descInputVoltageFault": "Input voltage the UPS measured at the last mains fault", "outlet.frequency": "Outlet frequency", "descOutletFrequency": "Frequency of the power the outlets deliver", "experimental.output.energy": "Output energy (experimental)", "descAmbientFirmware": "Firmware version of the external sensor module", "descAmbientMfr": "Manufacturer of the external sensor module connected to the device", "descAmbientModel": "Model of the external sensor module connected to the device", "descAmbientName": "Name an administrator gave this sensor in the device's settings", "descAmbientContactsName": "Name an administrator gave this dry contact in the device's settings", "descOutletName": "Name an administrator gave this outlet in the device's settings", "descOutletGroupName": "Name an administrator gave this outlet group in the device's settings", "driverParameter": "Driver setting", "descDriverParameter": "A setting the driver was started with, copied from ups.conf or its command line", "cmdOutletGroupShutdownReturn": "Group off, on when power returns", "descCmdOutletGroupShutdownReturn": "⚠ Switch every outlet of this group off and back on when mains power returns", "cmdOutletGroupShutdownStayoff": "Group off and stay off", "descCmdOutletGroupShutdownStayoff": "⚠ Switch every outlet of this group off and leave it off until switched on by hand", "cmdOutletGroupShutdownReboot": "Restart group", "descCmdOutletGroupShutdownReboot": "⚠ Switch every outlet of this group off and on again", "cmdOutletGroupShutdownRebootGraceful": "Graceful group restart", "descCmdOutletGroupShutdownRebootGraceful": "⚠ Restart every outlet of this group, giving connected systems time to shut down first" }