{
    "* Not Present (Virtual)": "* 不存在（虚拟）",
    "Adapter will be stoped": "LoRaWAN 桥适配器将停止",
    "Application": "应用",
    "AuthenticationHeader": "身份验证设置",
    "AuthenticationInformation": "设置服务器的身份验证（如果需要）",
    "Base Ip for Bridge devices": "桥接设备的基本 IP",
    "Base Ip for LoraWAN devices": "LoraWAN 设备的基本 IP",
    "BridgeConnectionTest": "连接测试",
    "BridgeConnectionTestTooltip": "单击此按钮，检查与您的网桥的连接",
    "BridgeDevicesToGenerate": "设备管理器中显示的设备",
    "BridgeDevicesToGenerateTooltip": "选择您希望在设备管理器中看到的所需设备类型",
    "BridgeEnum": "桥枚举",
    "BridgeEnumTooltip": "选择一个枚举，用于将外国国家带到桥上",
    "BridgeForeignConfigHeader": "国外的设置",
    "BridgeForeignHeader": "选择桥枚举",
    "BridgeForeignPanel": "桥外语",
    "BridgeHeader": "通往外部系统的桥梁",
    "BridgeInformation": "通过 mqtt discovery 进行桥接的主要配置",
    "BridgeLoRaConfigHeader": "洛拉万大桥的布景",
    "BridgeLoRaHeader": "设备标识符的定义",
    "BridgeLoRaPanel": "LoRaWAN桥",
    "BridgePanel": "桥",
    "BridgeStateHeader": "定义发现主题的状态",
    "BridgeStateInformation": "您可以在此处定义一组状态，这些状态将设置为发现主题。 （也可以使用通配符）",
    "BridgeType": "桥型",
    "BridgeTypeHA": "家庭助理",
    "BridgeTypeOff": "离开",
    "BridgeTypeSH": "智能家居",
    "BridgeTypeTooltip": "选择外部系统类型",
    "BridgeToIobIdSource": "ToIob ID 来源",
    "BridgeToIobIdSourceTooltip": "选择 ToIob 设备从 entity_id 还是 unique_id 创建 ioBroker state ID",
    "BridgenotificationActivation": "通知激活",
    "BridgenotificationTooltip": "激活或停用通知",
    "ClimateActTemperatureText": "目标温度",
    "ClimateForeignHeader": "定义气候实体的状态",
    "ClimateForeignInformation": "在这里您可以定义一系列气候定义",
    "ClimateHeader": "定义气候实体的状态",
    "ClimateInformation": "在这里您可以定义一系列气候定义",
    "ClimateModeTemperatureText": "模式",
    "ClimateNameText": "实体名称",
    "ClimateTargetTemperatureText": "目标温度",
    "ClosedSignalId": "接近限位开关的 id",
    "ClosedSignalText": "接近限位开关的 id",
    "CommandText": "命令ID",
    "Config this device": "配置该设备",
    "CoverAwning": "棚",
    "CoverBlind": "瞎的",
    "CoverCloseText": "关闭命令ID",
    "CoverClosedSignal": "关闭限位开关",
    "CoverClosedSignalTooltip": "选择指示关闭状态的布尔信号",
    "CoverClosedSignalTrue": "如果关闭则信号为 true",
    "CoverClosedSignalTrueTooltip": "选择 true，如果在盖子关闭的情况下信号值为 true",
    "CoverCurtain": "窗帘",
    "CoverDamper": "阻尼器",
    "CoverDeviceClass": "设备类别",
    "CoverDeviceClassTooltip": "选择所需的设备类别",
    "CoverDoor": "门",
    "CoverDownText": "向下命令ID",
    "CoverGarage": "车库",
    "CoverGate": "门",
    "CoverHeader": "定义 Cover 实体的状态",
    "CoverInformation": "在这里您可以定义一组封面定义",
    "CoverNameText": "实体名称",
    "CoverNumberSignal": "限位开关作为数字状态",
    "CoverNumberSignalTooltip": "如果您有带有限位开关信号的数字信号（OPENING、OPENED、CLOSING、CLSOED），请选择",
    "CoverOpenSignal": "打开限位开关",
    "CoverOpenSignalTooltip": "选择一个指示打开状态的布尔信号",
    "CoverOpenSignalTrue": "如果打开则信号为真",
    "CoverOpenSignalTrueTooltip": "如果盖子打开时信号值为 true，则选择 true",
    "CoverOpenText": "打开命令ID",
    "CoverPosition": "位置",
    "CoverPositionText": "职位编号",
    "CoverPositionTooltip": "已选择：位置的单独 ID",
    "CoverSeparate": "分离",
    "CoverSeparateTooltip": "selected：用于打开/关闭的单独布尔状态。否则，为一个字符串状态。",
    "CoverShade": "阴影",
    "CoverShutter": "快门",
    "CoverSignal": "来自限位开关的信号",
    "CoverSimulatePosition": "模拟位置",
    "CoverSimulatePositionTooltip": "根据限位开关模拟位置（某些系统需要）",
    "CoverStop": "停止",
    "CoverStopText": "停止命令ID",
    "CoverStopTooltip": "停止命令的附加状态",
    "CoverTilt": "倾斜",
    "CoverTiltText": "倾斜ID",
    "CoverTiltTooltip": "已选择：倾斜的单独 ID",
    "CoverWindow": "窗户",
    "Device": "设备",
    "DeviceIdentifier": "设备标识符",
    "DeviceIdentifierTooltip": "HA 设备的标识符",
    "DeviceIdentifiers": "设备标识符",
    "DeviceObject": "设备对象",
    "EnableRefresh": "循环发现",
    "EnableRefreshTooltip": "能够在循环 cron 中发现",
    "Enter new devicetype": "输入新的设备类型",
    "Enter new name": "输入新名称",
    "Folder": "文件夹",
    "HomeId": "家庭ID",
    "HomeNumber": "家庭号码",
    "HomeNumberTooltip": "输入将发送到家的号码",
    "HomeStateId": "家乡ID",
    "HomeStateNumber": "家庭号码",
    "HomeStateNumberTooltip": "表示家乡州的数字",
    "Humidifier": "加湿器",
    "HumidifierActText": "实际湿度",
    "HumidifierHeader": "定义加湿器实体的状态",
    "HumidifierInformation": "您可以在此处定义一系列加湿器定义",
    "HumidifierNameText": "实体名称",
    "HumidifierOnOffText": "开/关",
    "HumidifierTargetText": "目标湿度",
    "HumidifierTooltip": "加湿器/除湿器",
    "Info of this device": "该设备的信息",
    "LastDiscover": "最后发现",
    "LastPublish": "最后发布的消息",
    "LastSubscribe": "最后订阅的消息",
    "LastUplink": "最后上行链路：",
    "LightBrightness": "亮度",
    "LightBrightnessText": "亮度 ID",
    "LightBrightnessTooltip": "启用设置亮度ID",
    "LightColor": "颜色",
    "LightColorTemperature": "色温",
    "LightColorTemperatureText": "色温 ID",
    "LightColorTemperatureTooltip": "启用设置色温ID",
    "LightColorText": "颜色编号",
    "LightColorTooltip": "启用设置颜色 ID",
    "LightEffects": "效果",
    "LightEffectsText": "效果 ID",
    "LightEffectsTooltip": "启用设置效果 ID",
    "LightHeader": "定义光实体的状态",
    "LightInformation": "在这里您可以定义一组灯光定义",
    "LightNameText": "实体名称",
    "LightOnOffText": "开/关",
    "LoRaWAN Network Service is connected": "LoRaWAN 网络服务已连接",
    "LoRaWAN Network Service is disconnected": "LoRaWAN网络服务已断开",
    "LoRaWAN device is back online": "以下 LoRaWAN 设备已重新上线",
    "LoRaWAN device is offline": "以下 LoRaWAN 设备离线",
    "LoRaWAN devices": "LoRaWAN设备",
    "LockHeader": "定义锁实体的状态",
    "LockInformation": "在这里你可以定义一个Lock定义的数组",
    "LockLockText": "锁ID",
    "LockNameText": "实体名称",
    "LockOpen": "打开",
    "LockOpenText": "开放ID",
    "LockOpenTooltip": "selected：打开的单独布尔状态",
    "LockSeparate": "分离",
    "LockSeparateState": "独立国家",
    "LockSeparateStateTooltip": "selected：锁状态的单独状态",
    "LockSeparateTooltip": "selected：锁定、解锁的单独布尔状态。否则，为一个字符串状态。",
    "LockUnlockText": "解锁ID",
    "LorawanOff": "离开",
    "MQTTInstance": "MQTT实例",
    "MowerHeader": "定义割草机实体的状态",
    "MowerInformation": "您可以在此处定义一系列割草机定义",
    "MowerNameText": "实体名称",
    "MowerSeparate": "分开的",
    "MowerSeparateTooltip": "选择所需的命令类型",
    "MowerStateSeparate": "分开的",
    "MowerStateSeparateTooltip": "选择所需的状态类型",
    "MowingStateId": "割草状态 ID",
    "MowingStateNumber": "割草号码",
    "MowingStateNumberTooltip": "指示割草状态的数字",
    "NoBridgeConfiged": "没有配置桥接！！！",
    "NumberId": "命令编号的 ID",
    "NumberSignalId": "数量限制开关的 id",
    "NumberSignalText": "数量限制开关的 id",
    "NumberStateId": "州号 ID",
    "NumberStateText": "州号 ID",
    "NumberText": "号码 ID",
    "OneNumber": "一个数字用于命令",
    "OneNumberState": "一个数字代表州",
    "OneString": "一个命令字符串",
    "OpenSignalId": "打开限位开关的 id",
    "OpenSignalText": "打开限位开关的 id",
    "OriginHeader": "原始设置",
    "OriginInformation": "设置预期数据的来源",
    "PauseStateId": "暂停状态ID",
    "PauseStateNumber": "暂停号码",
    "PauseStateNumberTooltip": "表示暂停状态的数字",
    "RefreshDiscoveryCronJob": "发现周期",
    "RefreshDiscoveryCronJobTooltip": "插入 cronjob 以刷新发现",
    "Rename this device": "重命名该设备",
    "SSL": "SSL协议",
    "SeparateIds": "命令的分隔 ID",
    "Serverinformation": "设置服务器的主要通信设置",
    "ServersettingsHeader": "服务器设置",
    "Set the Base Ip for LoRaWAN devices": "设置 LoRaWAN 设备的基本 IP",
    "Set the Base Ip for bride devices": "设置新娘设备的基本IP",
    "StartId": "起始ID",
    "StartNumber": "起始编号",
    "StartNumberTooltip": "输入将发送给开始的号码",
    "StatciTextMowerSeparate": "为 worx 适配器选择默认值",
    "State": "状态",
    "StateText": "州身份证",
    "StopId": "停止编号",
    "StopNumber": "停止号码",
    "StopNumberTooltip": "输入将发送到停止的号码",
    "String": "细绳",
    "UpText": "向上命令ID",
    "VirtualMode": "虚拟模式",
    "VirtualModeTooltip": "如果模式 ID 不存在，则激活",
    "WithAct": "与行为状态",
    "WithActTooltip": "激活以设置实际值的 id",
    "_BridgeEnumDiscription": "选择一个用于将状态设置到 Bridge 中的枚举。\n设备的名称遵循以下优先级：\n1. 设备名称\n2. 频道名称\n3. 状态的命名空间",
    "_DeviceIdentifierConfiguredDiscription": "配置Topic的结果：",
    "_DeviceIdentifierDiscription": "配置标识符以为状态创建 MQTT 主题。您可以选择多个设备标识符，并用分隔符分隔。",
    "_DeviceIdentifierExampleDiscription": "配置主题示例：",
    "_Deviceinformations": "设备信息",
    "_DiscoveredIds": "发现的 ID",
    "_NoLoRaWAN": "状态不在正确的 LoRaWAN 实例中",
    "_PublishedIds": "已发布的 ID",
    "_SubscribedTopics": "订阅的主题",
    "actualDeviceValues": "实际设备值",
    "actualValues": "实际值",
    "all devices": "所有设备",
    "all notifications": "所有通知",
    "applicationId": "应用程序 ID",
    "applicationName": "应用名称",
    "bridge connection": "连接通知",
    "commandForOpen": "打开锁的命令",
    "commandForOpenTooltip": "设置打开锁的命令",
    "confirmed": "确认的",
    "confirmedTooltip": "如果您想发送带有确认消息的下载，请启用此选项",
    "connection to bridge is activ": "与网桥的连接已激活",
    "connection to bridge is closed": "与网桥的连接将被关闭",
    "connection to bridge ok": "✅ 连接正常",
    "crc": "校验和（crc 16）",
    "crcTooltip": "将 crc16 附加到您的数据中",
    "customConfig": "“定制”-组合",
    "customConfigHeader": "将特定的自定义对象添加到每个解码状态",
    "customConfigurationJsonActive": "“配置-自定义”-JSON",
    "customConfigurationJsonActiveTooltip": "使用此函数，您可以从配置通道在自定义条目上添加所需的 JSON",
    "customControlJsonActive": "“控制-自定义”-JSON",
    "customControlJsonActiveTooltip": "使用此函数，您可以从控制通道在自定义条目上添加所需的 JSON",
    "customDecodedJsonActive": "“已解码.自定义”-JSON",
    "customDeleteDesciption": "要删除条目，请输入内容为“null”的条目。",
    "customDeleteDescriptionImageTooltip": "有关删除现有条目的信息。",
    "customDesciption": "下图显示了 JSON-EDITOR 中数据的示例。有关更多信息，请使用文档。",
    "customDescriptionImageTooltip": "请在编辑器中填写您希望在解码状态的 common.custom 对象中拥有的所需 json。",
    "customJson": "“自定义”对象-“通用”对象中的对象",
    "customJsonActiveTooltip": "使用此功能，可以将您自己的自定义条目添加到解码状态",
    "customJsonInformation": "使用此功能，可以将您自己的自定义条目添加到解码状态。只需在 active 函数中输入所需的 json 内容即可。",
    "customJsonTooltip": "Fügen Sie ein Objekt hinzu, welches in common.custom geschrieben wrd.",
    "decimalPlaces": "小数位",
    "decimalPlacesTooltip": "选择所需的小数位数",
    "detectedRoles": "检测到的角色",
    "device online offline": "设备状态通知",
    "deviceEUI": "设备用户界面",
    "deviceId": "设备 ID",
    "deviceObject": "设备对象",
    "deviceSuffix": "设备后缀",
    "deviceType": "设备类型",
    "deviceTypeTooltip": "插入设备类型的名称，此配置有效。 （例如，Dragino XY 也匹配 Dragino）",
    "devices": "设备",
    "downlinkConfig": "下行链路配置",
    "downlinkConfigHeader": "添加您的设备特定的下行链路",
    "downlinkConfigMainHeader": "主要下行配置",
    "downlinkConfigSubHeader": "单独的下行链路配置",
    "enabled & collect": "启用并收集",
    "end": "最终值",
    "endTooltip": "插入最终值，该值将设置为下行链路（值必须为十六进制 - 字符串类型除外）",
    "expertSettings": "专家设置",
    "foreign devices": "外国设备",
    "front": "前值",
    "frontTooltip": "插入前值，该值将设置为下行链路（值必须为十六进制 - 字符串类型除外）",
    "generalInformations": "一般信息",
    "info devices": "信息设备",
    "ipUrl": "服务器的 url 或 ip",
    "ipUrlTooltip": "输入ip地址，或者你想要连接的url",
    "keepalive": "保活",
    "keepaliveTooltip": "输入保活功能的时间（以秒为单位）",
    "lastJoined": "最后加入",
    "lengthInByte": "状态长度（字节）",
    "lengthInByteTooltip": "插入状态的长度（以字节为单位）",
    "limitMax": "限制最大值",
    "limitMaxTooltip": "限制正向输入的可能性",
    "limitMaxValue": "最大限度。价值",
    "limitMaxValueTooltip": "输入正方向的极限值",
    "limitMin": "限制最小值",
    "limitMinTooltip": "限制负方向输入的可能性",
    "limitMinValue": "分钟。价值",
    "limitMinValueTooltip": "输入负方向的极限值",
    "lorawan adapter settings": "lorawan 的适配器设置",
    "lorawan devices": "洛拉旺设备",
    "mainSettings": "主要设置",
    "minus": "减",
    "multiplyfaktor": "多重因素",
    "multiplyfaktorTooltip": "插入您想要与数据相乘的因子（例如，输入 1(min) => 60s 为 60）",
    "name": "姓名",
    "nameTooltip": "为此下行链接插入州名称",
    "new device discovered": "发现新设备",
    "new discover": "发现通知",
    "no": "没有任何",
    "no command": "没有命令 ID",
    "no connection to bridge": "❌没有连接",
    "no crc": "没有添加crc",
    "no notification": "没有通知",
    "no notifications": "不通知",
    "notification": "通知",
    "notificationActivation": "通知激活",
    "notificationTooltip": "激活或停用通知",
    "off": "离开",
    "offTooltip": "如果将状态设置为 false，则插入要发送的值",
    "on": "在",
    "onClick": "点击时",
    "onClickTooltip": "如果将状态设置为 true（单击按钮），则插入要发送的值",
    "onTooltip": "如果将状态设置为 true，则插入要发送的值",
    "open (Standard)": "开放（标准）",
    "origin": "起源",
    "originTooltip": "选择您的数据来源",
    "password": "密码",
    "passwordTooltip": "输入您的密码",
    "port": "港口",
    "portDownlink": "港口",
    "portDownlinkTooltip": "输入你要下行发送的端口",
    "portTooltip": "输入连接的端口",
    "priority": "优先事项",
    "priorityTooltip": "输入您要在下行链路中发送的优先级",
    "publishTooltip": "在 Bridge 上发布状态",
    "published": "发表",
    "pull (Something else)": "拉（别的东西）",
    "sendWithUplink": "通过上行链路发送",
    "sendWithUplinkTooltip": "选择具有所需设备类型的配置的发送模式",
    "separator": "分隔符",
    "separatorTooltip": "选择标识符的分隔符",
    "space": "空间",
    "sslTooltip": "如果您的连接使用 ssl，请启用此复选框（使用 hpts 而不是 http）",
    "statesValue": "状态值的 JSON",
    "statesValueTooltip": "输入此参数状态的 JSON",
    "subscribeTooltip": "从 Bridge 订阅状态",
    "subscribed": "已订阅",
    "swap": "小尾数（sawp 字节顺序）",
    "swapTooltip": "交换输入的字节码",
    "toIob devices": "工具设备",
    "type": "类型",
    "typeTooltip": "选择您想要选择的输入类型",
    "underline": "强调",
    "unit": "单元",
    "unitTooltip": "插入您的值的单位",
    "unlatch (Nuki)": "解锁（Nuki）",
    "unused": "未使用",
    "usedApplicationName": "使用的应用程序名称（common.name）",
    "usedDeviceId": "使用的设备 ID（common.name）",
    "username": "用户名",
    "usernameTooltip": "输入您的用户名",
    "withStates": "与国家",
    "withStatesTooltip": "有可供选择的州"
}