{
	"ERR_maxCurrentBelowMin": "Maximum current must be greater than or equal to minimum current",
	"ERR_minCurrentAboveMax": "Minimum current must be less than or equal to maximum current",
	"LBL_autoPhaseSwitch": "Automatic 1-/3-phase switching (hardware gen 3+)",
	"LBL_autoPhaseSwitchHelp": "Let the ChargeManager switch this wallbox between one-phase and three-phase charging based on the available surplus. Only for hardware generation 3 and newer; briefly interrupts charging on each switch.",
	"LBL_batteryMode": "Home battery mode",
	"LBL_batteryModeDisabled": "Disabled",
	"LBL_batteryModeDisabledDescription": "Ignore the home battery; no SOC state is required",
	"LBL_batteryModeMinimumSoc": "Minimum SOC",
	"LBL_batteryModeMinimumSocDescription": "Stop EV charging below the minimum SOC without adding battery power",
	"LBL_batteryModePriority": "Battery priority",
	"LBL_batteryModePriorityDescription": "Prioritize the battery and gradually release the configured bonus above the minimum SOC",
	"LBL_batterySocHysteresis": "Battery SOC hysteresis below the minimum",
	"LBL_batterySocMaxAgeSeconds": "Maximum battery SOC age (0 disables the check)",
	"LBL_chargeManagerMaxBatteryBonus": "Maximum battery bonus added to the surplus near 100% SoC [W]",
	"LBL_chargeManagerMinCurrent": "Minimum ChargeManager current for PV surplus charging [A]",
	"LBL_chargeManagerReservePower": "Grid reserve power kept free instead of charging the car [W]",
	"LBL_chargeManagerSettings": "ChargeManager settings",
	"LBL_chargerName": "Charger name",
	"LBL_cycleTime": "Time between data polls from the charger [ms]",
	"LBL_ipAddress": "IP address of the go-eCharger",
	"LBL_maxChargeCurrent": "Maximum charging current of the power supply for all wallboxes [A]",
	"LBL_maxChargeCurrentHelp": "Installation-wide limit (main breaker / supply). Caps ChargeManager (PV surplus) and ChargeNOW for every wallbox.",
	"LBL_readOnlyMode": "Read-only mode - charging release is not sent to the charger (for use with RFID tags)",
	"LBL_standardSettings": "Standard settings",
	"LBL_stateHomeBatSoc": "Object ID for the current state of charge of the home battery [%]",
	"LBL_stateHomePowerConsumption": "Object ID for the current home power consumption [W]",
	"LBL_stateHomeSolarPower": "Object ID for the currently available solar power [W]",
	"LBL_subtractSelfConsumption": "Charger consumption is included in the home power consumption value",
	"LBL_wallBoxList": "Wallbox list",
	"LBL_wallBoxListHelp": "The ChargeManager serves the wallboxes from top to bottom: the first entry receives the PV surplus first, later entries only get what is left over. Use the arrow buttons to change the priority.",
	"LBL_wallboxMaxAmp": "Maximum charging current for this wallbox [A] (0 = installation limit)",
	"LBL_wallboxMaxAmpHelp": "Highest current for this wallbox, e.g. to throttle it. 0 uses the installation-wide maximum. Never exceeds the installation limit.",
	"LBL_wallboxMinAmp": "Minimum charging current for this wallbox [A] (0 = default)",
	"LBL_wallboxMinAmpHelp": "Lowest current assigned to this wallbox. 0 uses the technical minimum (6 A)."
}