{
    "ESPHomeCommunityLink": "有关 ESPHome、示例配置和社区链接的更多信息，请访问：",
    "chkEnableESPHome": "启用 ESPHome 仪表板",
    "cnfDeleteYamlCancel": "Cancel",
    "cnfDeleteYamlOk": "Delete",
    "cnfDeleteYamlText": "Are you sure you want to delete this file?",
    "cnfDeleteYamlTitle": "Confirm file deletion",
    "existDevicesHeader": "该适配器管理的所有设备及其连接状态",
    "hlpDiscoveryListeningAddress": "只发现该接口上的设备",
    "hlpESPHomeDashboardVersion": "选择必须使用哪个版本的 ESPHome Dashboard",
    "hlpInputApiPassword": "API密码（旧的，请使用加密密钥！）",
    "hlpInputDeviceIP": "选择现有设备或输入新设备的IP",
    "hlpInputEncryptionKey": "提供设备特定的加密密钥（首选）",
    "hlpSelectedFilename": "Enter the filename from the table above to download or delete it",
    "introLine-1": "ioBroker ESPHome 允许管理和控制支持 ESPHome 的设备，您必须自己创建并上传这些二进制文件！",
    "introLine-2": "构建这些二进制文件需要 ESPHome Dashboard。",
    "lblApiPass": "默认本机 API 密码（旧版）",
    "lblAutoDiscovery": "设备发现已启用",
    "lblConnectDetails-Line-1": "ESPHome 原生 API 用于通过高度优化的网络协议直接与客户端通信。",
    "lblConnectDetails-Line-2": "将 api: 行添加到 ESPHome 配置后，您可以转到此页面并等待 ESPHome 设备显示在已发现的设备部分下（最多可能需要 5 分钟），或者通过选择“添加设备”手动添加设备",
    "lblConnectDetails-Line-3": "ESPHome 本机 API 基于使用协议缓冲区的自定义 TCP 协议。",
    "lblConnectIobroker": "ioBroker 直接通过 Native API 而不是 MQTT 进行通信，为您提供最佳体验并支持加密密钥（推荐）而不是 API/MQTT 密码",
    "lblDashboardLink": "要在 ioBroker 管理选项卡中显示 ESPHome 仪表板，需要提供运行安装的 IP-Ares",
    "lblDefaultCredentials": "默认 API / 加密密钥设置设备（不推荐）",
    "lblDefaultCredentials-Line-1": "每个设备都应该有自己唯一的加密密钥（推荐）或 API 密码，设备发现（启用后）会检测所有设备并尝试使用下面的凭据进行连接",
    "lblDefaultCredentials-Line-2": "如果您分配唯一的加密密钥（推荐）或 API 密码，新设备将显示在“发现的设备”选项卡上（或必须添加），并且您必须手动提供唯一的凭据",
    "lblDelDevice": "删除设备",
    "lblDeleteYamlButton": "Delete File",
    "lblDevicesTable": "所有当前（已知）设备及其连接状态",
    "lblDiscoveryListeningAddress": "收听地址",
    "lblDownloadYamlButton": "Download File",
    "lblESPHomeDashboardVersion": "ESPHome 仪表板版本",
    "lblESPHomeIP": "运行 ESPHome 仪表板以集成到 ioBroker Admin 中的 IP 地址",
    "lblESPHomePort": "ESPHome 仪表板端口",
    "lblEnableESPHome": "您可以单独运行 ESPHome Dashboard，也可以激活以下选项以在 ioBroker 中本机运行它",
    "lblEncryptionKey": "默认加密密钥",
    "lblFileActionsHeader": "File Actions",
    "lblHeaderConnect": "如何将支持 ESPHome 的设备连接到 ioBroker",
    "lblHeaderMainPage": "ESPHome 仪表板集成",
    "lblHeaderYamlManagement": "YAML File Management",
    "lblIgnoreList": "设备发现要排除的 IP 地址",
    "lblInputApiPassword": "接口密码",
    "lblInputDeviceIP-content": "设备 IP 地址",
    "lblInputEncryptionKey": "加密密钥",
    "lblLoadDevices": "刷新设备概览",
    "lblRefreshYamlFiles": "Refresh File List",
    "lblSelectedFilename": "Select file for download/delete",
    "lblTxtNoButtonsIfNotActive": "设备表和添加/删除按钮仅在适配器运行时可用",
    "lblUploadContent": "YAML Content",
    "lblUploadFilename": "Filename (e.g., my-device.yaml)",
    "lblUploadYamlButton": "Upload File",
    "lblUploadYamlHeader": "Upload YAML File",
    "lblUploadYamlInfo": "Paste the content of your YAML file below and provide a filename to upload it to the ESPHome directory.",
    "lblYamlFileUpload": "Upload YAML File",
    "lblYamlFilesHeader": "Available YAML Files",
    "lblYamlFilesTable": "YAML files in ESPHome directory",
    "lblYamlManagementInfo": "Upload, download, and manage YAML configuration files for your ESPHome devices. Files are stored in the ESPHome directory and can be used by the ESPHome Dashboard.",
    "lbl_addUpdateDevice": "添加/修改设备",
    "maxRetry": "将设备视为离线之前的最大连接重试次数",
    "newDevicesHeader": "新发现的设备，请提供凭据！",
    "reConInterval": "ioBroker 尝试重新连接此设备之间的设置"
}