{
    "Cancel": "取消",
    "Edit Device:": "编辑设备",
    "May not be empty": "不能为空",
    "Name": "姓名",
    "Name type 1": "名称类型 1",
    "Name type 2": "名称类型2",
    "Object-ID": "对象ID",
    "Password": "密码",
    "Select": "选择",
    "Speech phrases": "言语短语",
    "active": "积极的",
    "alarm": "报警电路",
    "alarm_Chips": "报警电路状态",
    "alarm_flash": "爆闪频率",
    "alarm_repeat": "重复",
    "changes_repeat": "重复",
    "chatID": "聊天ID",
    "circuits": "Sharp、Sharpf 内部和通知电路",
    "delay": "无声警报",
    "delay_inside": "内部无声警报尖锐",
    "delayed_trigger_count": "传感器数量",
    "delayed_trigger_header": "延迟触发",
    "delayed_trigger_info": "具有“延迟”触发模式的传感器（例如运动探测器）仅当一定数量的不同延迟传感器在时间窗口内触发时才会发出警报。",
    "delayed_trigger_time": "时间窗口（分钟）",
    "delayed_trigger_time_help": "传感器必须触发的时间窗口（以分钟为单位）",
    "desc_select_activated": "警报系统已布防（真/假）",
    "desc_select_activated_with_warnings": "配备开路警告电路（正确/错误）",
    "desc_select_activation_failed": "激活失败（正确/错误）",
    "desc_select_alarm_flash": "入室盗窃时使用闪光灯（正确/错误）",
    "desc_select_burglar_alarm": "防盗警报已激活（真/假）",
    "desc_select_deactivated": "警报系统已撤防（真/假）",
    "desc_select_enableable": "系统可以布防（正确/错误）",
    "desc_select_gets_activated": "布防倒计时正在进行（真/假）",
    "desc_select_notification_changes": "通知电路已更改（真/假）",
    "desc_select_one_changes": "警报类型 1 电路发生变化（真/假）",
    "desc_select_sharp_inside_activated": "内部保护处于活动状态（正确/错误）",
    "desc_select_silent_alarm": "无声警报已激活（真/假）",
    "desc_select_silent_flash": "无声警报时闪光（真/假）",
    "desc_select_siren": "警笛响起（正确/错误）",
    "desc_select_siren_inside": "内部警报器响起（正确/错误）",
    "desc_select_sleep": "夜间休息模式已启用（正确/错误）",
    "desc_select_state_list": "数字报警状态（0-8）",
    "desc_select_two_changes": "警报类型 2 电路发生变化（真/假）",
    "desc_trigger_activation_aborted": "激活倒计时已中止",
    "desc_trigger_activation_failed": "由于断路激活失败",
    "desc_trigger_any": "任何状态变化时触发",
    "desc_trigger_burglary": "入室盗窃警报已触发",
    "desc_trigger_deactivated": "警报系统已停用",
    "desc_trigger_false": "当状态变为 false 时触发",
    "desc_trigger_gets_activated": "警报系统布防（倒计时运行）",
    "desc_trigger_mode_any": "每次更新时触发，即使是相同的值",
    "desc_trigger_mode_ne": "仅当值实际发生变化时触发",
    "desc_trigger_night_rest": "夜间休息模式已启用",
    "desc_trigger_sharp": "警报系统已全面布防",
    "desc_trigger_sharp_inside": "周边/内部防护已激活",
    "desc_trigger_silent_alarm": "无声警报已触发",
    "desc_trigger_true": "当状态变为 true 时触发",
    "desc_use_activate_nightrest": "启动夜间休息模式",
    "desc_use_activate_sharp_inside": "激活内部/周边保护",
    "desc_use_disable": "解除警报系统",
    "desc_use_enable": "立即布防警报系统",
    "desc_use_enable_with_delay": "为警报系统配备倒计时延迟",
    "desc_use_panic": "触发恐慌警报（立即入室盗窃）",
    "desc_use_quit_changes": "确认/退出电路更改通知",
    "disabled": "残疾人",
    "donat": "我不是专业开发人员，这是一个私人项目，开发是在我的业余时间进行的，如果您想支持此项目，可以通过 PayPal 捐款来感谢我。也欢迎您向我发送有关适配器未来版本的功能请求。",
    "general": "主要设置",
    "general_settings": "常规设置",
    "important": "重要的！不要创建循环。",
    "info_general": "配置主要警报设置：激活延迟、警报持续时间、夜间休息时间表、密码保护和警报系统的一般行为选项。",
    "info_notifications": "配置通知实例（电子邮件、Pushover、Telegram）并选择哪些警报事件应触发通知。在“单词”选项卡中自定义通知文本。",
    "info_other_alarms": "配置最多两种带有自己的传感器电路的附加独立警报类型（例如火灾警报、水警报）。它们独立于主报警系统运行。",
    "info_presence": "根据时间范围、日出/日落或光传感器值自动切换灯光或开关来模拟存在。每个设备都可以有自己的时间表、持续时间和随机化设置。",
    "info_sayit": "配置语音公告的文本转语音实例。定义哪些警报事件触发语音输出并自定义下面的公告短语。",
    "info_sayit_table": "选择文本转语音状态（例如 sayit.0.tts.text）并选择要宣布的短语。列映射：1 = 已激活、2 = 已停用、x = 已中止、3 = 激活失败、4 = 警告、5 = 更改、6 = 警报/防盗、7 = 夜间休息开始、8 = 夜间休息结束、9 = 夜间休息期间更改、9+ = Sharp inside 已激活、0 = Sharp inside 已停用、时间 = 倒计时、1 = 警报类型 1（火灾）、2 = 警报类型 2 （水）。",
    "info_shortcuts": "输出快捷方式将警报状态映射到外部执行器（例如灯、警报器）。输入快捷方式允许外部开关或按钮控制报警系统。重要提示：避免创建循环！",
    "info_states": "定义监控电路——报警系统监控的传感器和状态。将每个电路分配给警报模式：尖锐（全面保护）、尖锐内部（周界）、无声警报和通知。",
    "info_words": "您可以在单词选项卡中编辑通知",
    "info_words_tab": "自定义每个警报事件的日志消息和通知文本。这些文本出现在 ioBroker 日志中并用于通知消息。",
    "info_zones": "将传感器分组为最多三个独立区域。区域提供单独的变化检测——每个区域独立于主警报报告其自身的状态变化。",
    "input": "输入快捷键",
    "input_logs": "您可以在单词选项卡中编辑通知",
    "inside": "里面锋利",
    "leave": "离开",
    "log_aborted": "激活已中止",
    "log_act": "活性",
    "log_act_not": "无法激活",
    "log_act_notice": "延迟激活时的通知",
    "log_act_warn": "激活时有警告",
    "log_act_warn_circuit": "警告电路激活时通知",
    "log_burgle": "布格勒",
    "log_deact": "已停用",
    "log_night": "夜间休息时的变化",
    "log_nights_b_w": "夜间休息从警告开始",
    "log_one": "报警类型 1 短语",
    "log_panic": "通过紧急按钮进行盗窃",
    "log_pass": "密码错误",
    "log_sleep_b": "夜间休息开始",
    "log_sleep_e": "晚上休息结束",
    "log_two": "警报类型 2 短语",
    "log_warn": "变化",
    "log_warn_act": "锋利内部激活",
    "log_warn_b_w": "尖锐的内部激活并带有警告",
    "log_warn_deact": "夏普内部已停用",
    "log_zone_one": "一区变化",
    "log_zone_three": "三区变化",
    "log_zone_two": "二区变化",
    "myalarm adapter settings": "myalar 的适配器设置",
    "negativ": "否定",
    "night_Chips": "夜间休息电路状态",
    "night_from": "晚上休息的开始",
    "night_to": "晚上休息结束",
    "notification": "通知（包括夜间休息）",
    "notification_texts": "通知文本",
    "notifications": "通知",
    "opt_leave": "倒计时离开时激活",
    "opt_log": "日志输出",
    "opt_night": "夜间休息时控制配置状态",
    "opt_night_silent": "夜间休息时无言语输出",
    "opt_say_changes": "夜间休息时的变化",
    "opt_say_names": "设备名称输出",
    "opt_say_night": "夜间休息开始时的警告",
    "opt_say_warn": "警告电路激活开始时的警告",
    "opt_say_warn_changes": "锐利内部变化",
    "opt_siren": "当内部盗贼尖锐时激活外部警报器",
    "opt_telegram": "Telegram 的特殊参数",
    "opt_warning": "激活时忽略配置状态",
    "option_presence": "触发方式",
    "other_alarms": "其他警报",
    "output": "输出快捷键",
    "please": "请不要使用与主要状态相同的状态",
    "presence": "在场",
    "presence_activate_delay": "激活后延时",
    "presence_delay": "延时",
    "presence_delay_select": "单元",
    "presence_delay_shuffle": "随机因素",
    "presence_description": "一点存在模拟",
    "presence_length": "占空比",
    "presence_length_select": "单元",
    "presence_length_shuffle": "随机因素",
    "presence_light_lux": "光值",
    "presence_time_from": "时间范围从",
    "presence_time_to": "时间范围至",
    "presence_trigger_light": "光传感器触发",
    "presence_val_off": "值关闭",
    "presence_val_on": "值开启",
    "repeat": "重复",
    "repeat_write": "重复次数",
    "repeat_write_tooltip": "在配置的秒数内每秒写入值（例如，对于 Reolink 警报器）。 0 = 关闭",
    "retrigger": "重新触发",
    "retrigger_tooltip": "即使状态值没有改变，再次触发快捷方式（例如警报第二次触发）",
    "sayit": "说话输出",
    "sayit_instance": "实例",
    "second": "所有时间输入均以秒为单位",
    "sendTo_Chips": "通知实例，例如电子邮件、Pushover 或 Telegram",
    "send_activated_with_warnings": "激活时有警告",
    "send_activation": "停用和激活时的通知",
    "send_activation_warnings": "激活时出现警告时通知",
    "send_activation_warnings_night": "夜间休息开始时发出警告时的通知",
    "send_alarm": "盗贼通知",
    "send_alarm_silent": "无声闹钟通知",
    "send_failed": "密码错误",
    "send_notification_changes": "在急躁、急躁的室内和夜间休息期间发送通知",
    "send_one_changes": "通知警报类型 1",
    "send_two_changes": "通知警报类型 2",
    "shortcuts": "捷径",
    "shuffle": "随机因素",
    "silent_flash": "无声警报时的闪光频率",
    "speech_delay": "延迟",
    "states": "监控",
    "text_aborted": "x - 激活中止",
    "text_activated": "1 - 激活后的短语",
    "text_alarm": "6 - 盗窃短语",
    "text_alarm_pause": "消息之间的秒数",
    "text_changes": "5 - 短语 at 变化尖锐，内部尖锐",
    "text_changes_night": "9 - 夜间休息时变化的短语",
    "text_countdown": "time - 激活时间",
    "text_deactivated": "2 - 停用后的短语",
    "text_failed": "3 - 失败时的短语",
    "text_nightrest_beginn": "7 - 短语夜间休息开始",
    "text_nightrest_end": "8 - 短语夜间休息结束",
    "text_one": "one - 附加警报类型一（火灾）的短语",
    "text_two": "二 - 附加警报类型二的短语（水）",
    "text_warn_begin": "9+ - 尖锐内部激活后的短语",
    "text_warn_end": "0 - 尖锐内部停用后的短语",
    "text_warning": "4 - 夜间休息开始时的警告短语和尖锐的内部",
    "time_activate": "激活时间",
    "time_alarm": "盗贼警报时间",
    "time_silent": "报警延迟",
    "time_silent_inside": "报警延迟尖锐内部",
    "time_warning": "警笛时间在尖锐的内部",
    "trigger_delayed": "延迟",
    "trigger_direct": "直接的",
    "trigger_mode": "触发方式",
    "trigger_values": "触发值",
    "tt_alarm": "包含在尖锐（全副武装）警报电路中",
    "tt_delay": "在完全报警之前使用延迟的无声报警",
    "tt_delay_inside": "在锐利内部模式下使用带有延迟的静音警报",
    "tt_enabled": "启用或禁用该行",
    "tt_inside": "包含在尖锐的内部（周边）电路中",
    "tt_leave": "倒计时期间触发立即完成布防",
    "tt_name": "该条目的显示名称",
    "tt_name_id": "要监控的 ioBroker 状态 ID",
    "tt_negativ": "反转逻辑：在 false 而不是 true 时触发",
    "tt_notification": "包含在通知电路中（夜间休息时激活）",
    "tt_presence_delay": "设备开启前的延迟",
    "tt_presence_delay_shuffle": "用于延迟变化的随机乘数 (1-N)",
    "tt_presence_delay_unit": "延迟时间单位",
    "tt_presence_length": "设备保持开启状态的时间（占空比）",
    "tt_presence_length_shuffle": "用于占空比变化的随机乘数 (1-N)",
    "tt_presence_length_unit": "占空比的时间单位",
    "tt_presence_light_lux": "勒克斯阈值：当光线低于此值时激活",
    "tt_presence_mode": "激活模式：时间范围、日出、日落或光传感器",
    "tt_presence_time_from": "基于时间的激活的开始时间 (HH:MM)",
    "tt_presence_time_to": "基于时间的激活的结束时间 (HH:MM)",
    "tt_presence_trigger_light": "光/勒克斯传感器的状态 ID（用于光模式）",
    "tt_presence_val_off": "关闭设备时要写入的值（例如 false、0）",
    "tt_presence_val_on": "打开设备时要写入的值（例如 true、1）",
    "tt_say_0": "宣布夏普内部停用",
    "tt_say_1": "激活后公告",
    "tt_say_2": "停用后公告",
    "tt_say_3": "激活失败时发出通知（断路）",
    "tt_say_4": "室内尖锐/夜间休息开始时发布警告",
    "tt_say_5": "宣布通知电路变更",
    "tt_say_6": "发布防盗警报",
    "tt_say_7": "宣布夜间休息开始",
    "tt_say_8": "宣布夜间休息结束",
    "tt_say_9": "在夜间休息期间宣布变更",
    "tt_say_9plus": "宣布锐内激活",
    "tt_say_fire": "发布警报类型 1（例如火灾）",
    "tt_say_time": "宣布激活倒计时",
    "tt_say_water": "发布警报类型 2（例如水）",
    "tt_say_x": "激活中止时发出通知",
    "tt_short_name_id": "触发时写入的外部状态 ID",
    "tt_short_select": "触发此快捷方式的内部警报状态",
    "tt_short_trigger": "激活此快捷方式的状态值",
    "tt_short_value": "要写入目标状态的值",
    "tt_shortin_name_id": "控制报警的外部状态ID",
    "tt_shortin_select": "触发时执行的内部警报操作",
    "tt_shortin_trigger_mode": "any = 每次更新时触发； ne = 仅在值变化时",
    "tt_shortin_value": "触发动作的外部状态值",
    "tt_speech_delay": "语音输出前的延迟（以秒为单位）",
    "tt_trigger_mode": "直接：立即触发报警。延迟：仅当在一个时间窗口内触发多个延迟传感器时才触发警报。",
    "user": "用户",
    "values": "设定值",
    "warning_Chips": "警告电路状态",
    "words": "字",
    "zone_one": "一区",
    "zone_three": "三区",
    "zone_two": "二区",
    "zones": "区域"
}