{
    "Cancel": "cancel",
    "Edit Device:": "Edit device",
    "May not be empty": "May not be empty",
    "Name": "name",
    "Name type 1": "Name type 1",
    "Name type 2": "Name type 2",
    "Object-ID": "object ID",
    "Password": "password",
    "Select": "select",
    "Speech phrases": "Speech phrases",
    "active": "active",
    "alarm": "alarm circuit",
    "alarm_Chips": "States for alarm circuit",
    "alarm_flash": "flash light frequenz at burgle",
    "alarm_repeat": "Repeat",
    "changes_repeat": "Repeat",
    "chatID": "Chat ID",
    "circuits": "Circuits for sharp, sharpf inside and notifications",
    "delay": "silent alarm",
    "delay_inside": "silent alarm sharp inside",
    "delayed_trigger_count": "Number of sensors",
    "delayed_trigger_header": "Delayed triggering",
    "delayed_trigger_info": "Sensors with trigger mode 'Delayed' (e.g. motion detectors) will only raise an alarm when a certain number of different delayed sensors trigger within a time window.",
    "delayed_trigger_time": "Time window (min)",
    "delayed_trigger_time_help": "Time window in minutes within which sensors must trigger",
    "desc_select_activated": "Alarm system is armed (true/false)",
    "desc_select_activated_with_warnings": "Armed with open warning circuits (true/false)",
    "desc_select_activation_failed": "Activation failed (true/false)",
    "desc_select_alarm_flash": "Flash light at burglary (true/false)",
    "desc_select_burglar_alarm": "Burglary alarm is active (true/false)",
    "desc_select_deactivated": "Alarm system is disarmed (true/false)",
    "desc_select_enableable": "System can be armed (true/false)",
    "desc_select_gets_activated": "Arming countdown is running (true/false)",
    "desc_select_notification_changes": "Notification circuit changed (true/false)",
    "desc_select_one_changes": "Alarm type 1 circuit changed (true/false)",
    "desc_select_sharp_inside_activated": "Inside protection is active (true/false)",
    "desc_select_silent_alarm": "Silent alarm is active (true/false)",
    "desc_select_silent_flash": "Flash light at silent alarm (true/false)",
    "desc_select_siren": "Siren is sounding (true/false)",
    "desc_select_siren_inside": "Inside siren is sounding (true/false)",
    "desc_select_sleep": "Night rest mode is active (true/false)",
    "desc_select_state_list": "Numeric alarm state (0-8)",
    "desc_select_two_changes": "Alarm type 2 circuit changed (true/false)",
    "desc_trigger_activation_aborted": "Activation countdown was aborted",
    "desc_trigger_activation_failed": "Activation failed due to open circuits",
    "desc_trigger_any": "Trigger on any state change",
    "desc_trigger_burglary": "Burglary alarm triggered",
    "desc_trigger_deactivated": "Alarm system is deactivated",
    "desc_trigger_false": "Trigger when state becomes false",
    "desc_trigger_gets_activated": "Alarm system is arming (countdown running)",
    "desc_trigger_mode_any": "Trigger on every update, even same value",
    "desc_trigger_mode_ne": "Trigger only when value actually changes",
    "desc_trigger_night_rest": "Night rest mode is active",
    "desc_trigger_sharp": "Alarm system is fully armed",
    "desc_trigger_sharp_inside": "Perimeter/inside protection is active",
    "desc_trigger_silent_alarm": "Silent alarm triggered",
    "desc_trigger_true": "Trigger when state becomes true",
    "desc_use_activate_nightrest": "Activate night rest mode",
    "desc_use_activate_sharp_inside": "Activate inside/perimeter protection",
    "desc_use_disable": "Disarm the alarm system",
    "desc_use_enable": "Arm the alarm system immediately",
    "desc_use_enable_with_delay": "Arm the alarm system with countdown delay",
    "desc_use_panic": "Trigger panic alarm (immediate burglary)",
    "desc_use_quit_changes": "Acknowledge/quit circuit change notifications",
    "disabled": "disabled",
    "donat": "I'm not a professional developer and this is a private project, the development takes place in my spare time, if you want to support this you can thank me with a donation under PayPal. You are also welcome to send me feature requests for future versions of the adapter.",
    "general": "Main settings",
    "general_settings": "general settings",
    "important": "Important! Do not create loops.",
    "info_general": "Configure the main alarm settings: activation delays, siren durations, night rest schedule, password protection, and general behavior options for the alarm system.",
    "info_notifications": "Configure notification instances (Email, Pushover, Telegram) and select which alarm events should trigger notifications. Customize notification texts in the Words tab.",
    "info_other_alarms": "Configure up to two additional independent alarm types (e.g., fire alarm, water alarm) with their own sensor circuits. These operate independently from the main alarm system.",
    "info_presence": "Simulate presence by automatically toggling lights or switches based on time ranges, sunrise/sunset, or light sensor values. Each device can have its own schedule, duration, and randomization settings.",
    "info_sayit": "Configure text-to-speech instances for voice announcements. Define which alarm events trigger speech output and customize the announcement phrases below.",
    "info_sayit_table": "Select a text-to-speech state (e.g. sayit.0.tts.text) and choose which phrases to announce. Column mapping: 1 = Activated, 2 = Deactivated, x = Aborted, 3 = Activation failed, 4 = Warnings, 5 = Changes, 6 = Alarm/Burgle, 7 = Night rest begins, 8 = Night rest ends, 9 = Changes during night rest, 9+ = Sharp inside activated, 0 = Sharp inside deactivated, time = Countdown, one = Alarm type 1 (Fire), two = Alarm type 2 (Water).",
    "info_shortcuts": "Output shortcuts map alarm states to external actuators (e.g., lights, sirens). Input shortcuts allow external switches or buttons to control the alarm system. Important: avoid creating loops!",
    "info_states": "Define the monitoring circuits — the sensors and states that the alarm system monitors. Assign each circuit to alarm modes: sharp (full protection), sharp inside (perimeter), silent alarm, and notifications.",
    "info_words": "You can edit the notifications at words tab",
    "info_words_tab": "Customize the log messages and notification texts for each alarm event. These texts appear in the ioBroker log and are used for notification messages.",
    "info_zones": "Group sensors into up to three independent zones. Zones provide separate change detection — each zone reports its own state changes independently from the main alarm.",
    "input": "Input shortcuts",
    "input_logs": "You can edit the notifications at words tab",
    "inside": "Sharp inside",
    "leave": "leave",
    "log_aborted": "Activation aborted",
    "log_act": "Activated",
    "log_act_not": "Can not activate",
    "log_act_notice": "Notice at activation with delay",
    "log_act_warn": "Activated with warnings",
    "log_act_warn_circuit": "Warn circuit notify at activation",
    "log_burgle": "Burgle",
    "log_deact": "Deactivated",
    "log_night": "Changes during night rest",
    "log_nights_b_w": "Night rest begins with warnings",
    "log_one": "Alarm type 1 phrase",
    "log_panic": "Burgle by panic button",
    "log_pass": "Wrong password",
    "log_sleep_b": "Night rest begins",
    "log_sleep_e": "Night rest ends",
    "log_two": "Alarm type 2 phrase",
    "log_warn": "Changes",
    "log_warn_act": "Sharp inside activated",
    "log_warn_b_w": "sharp inside activated with warnings",
    "log_warn_deact": "Sharp inside deactivated",
    "log_zone_one": "Changes in zone one",
    "log_zone_three": "Changes in zone three",
    "log_zone_two": "Changes in zone two",
    "myalarm adapter settings": "Adapter settings for myalar",
    "negativ": "negate",
    "night_Chips": "States for night rest circuit",
    "night_from": "Begins of the night rest",
    "night_to": "Ends of the night rest",
    "notification": "notifications (include night rest)",
    "notification_texts": "Notification texts",
    "notifications": "Notifications",
    "opt_leave": "activation at leaving during countdown",
    "opt_log": "Log output",
    "opt_night": "Control configured states during night rest",
    "opt_night_silent": "no speech output during night rest",
    "opt_say_changes": "Changes during night rest",
    "opt_say_names": "Devices Names output",
    "opt_say_night": "Warnings at the beginning of the night's rest",
    "opt_say_warn": "Warnings at the beginning of the warn circuit activate",
    "opt_say_warn_changes": "Changes during sharp inside",
    "opt_siren": "activate outside siren at burgle sharp inside",
    "opt_telegram": "special parameters for Telegram",
    "opt_warning": "Ignore configured states at activation",
    "option_presence": "Trigger mode",
    "other_alarms": "other alarms",
    "output": "Output shortcuts",
    "please": "Please, do not use the same states like the main states",
    "presence": "Presence",
    "presence_activate_delay": "Time delay after activation",
    "presence_delay": "Time delay",
    "presence_delay_select": "Unit",
    "presence_delay_shuffle": "Random factor",
    "presence_description": "A little presence simulation",
    "presence_length": "duty cycle",
    "presence_length_select": "Unit",
    "presence_length_shuffle": "Random factor",
    "presence_light_lux": "Light value",
    "presence_time_from": "Time range from",
    "presence_time_to": "Time range to",
    "presence_trigger_light": "Light sensor trigger",
    "presence_val_off": "Value OFF",
    "presence_val_on": "Value ON",
    "repeat": "repeat",
    "repeat_write": "Repeat (s)",
    "repeat_write_tooltip": "Write value every second for the configured number of seconds (e.g. for Reolink siren). 0 = off",
    "retrigger": "Retrigger",
    "retrigger_tooltip": "Trigger the shortcut again even if the state value has not changed (e.g. alarm triggers a second time)",
    "sayit": "speak output",
    "sayit_instance": "Instance",
    "second": "All time inputs are in second",
    "sendTo_Chips": "Notification instnces like Email, Pushover or Telegram",
    "send_activated_with_warnings": "Activated with warnings",
    "send_activation": "Notifications at deactivation and activation",
    "send_activation_warnings": "Notification if warnings upon activation",
    "send_activation_warnings_night": "notification when warnings at beginning night rest",
    "send_alarm": "Notifications at burgle",
    "send_alarm_silent": "notification at silent alarm",
    "send_failed": "wrong password",
    "send_notification_changes": "send notifications during sharp, scharp inside and night rest",
    "send_one_changes": "Notifications alarm type 1",
    "send_two_changes": "Notifications alarm type 2",
    "shortcuts": "shortcuts",
    "shuffle": "Random factor",
    "silent_flash": "flash light frequenz at silent alarm",
    "speech_delay": "delay",
    "states": "monitoring",
    "text_aborted": "x - Activation aborted",
    "text_activated": "1 - Phrase after activation",
    "text_alarm": "6 - Phrase at burgle",
    "text_alarm_pause": "Sec between Msg",
    "text_changes": "5 - Phrase at changes sharp and sharp inside",
    "text_changes_night": "9 - Phrase at changes during night rest",
    "text_countdown": "time - Time to activation",
    "text_deactivated": "2 - Phrase after deactivation",
    "text_failed": "3 - Phrase at failure",
    "text_nightrest_beginn": "7 - Phrase night rest begins",
    "text_nightrest_end": "8 - Phrase night rest ends",
    "text_one": "one - Phrase for additional alarm type one (Fire)",
    "text_two": "two - Phrase for additional alarm type two (Water)",
    "text_warn_begin": "9+ - Phrase after sharp inside activation",
    "text_warn_end": "0 - Phrase after sharp inside deactivation",
    "text_warning": "4 - Phrase of warnings at the beginning night rest and sharp inside",
    "time_activate": "Activation time",
    "time_alarm": "Siren time at burgle",
    "time_silent": "Alarm delay",
    "time_silent_inside": "alarm delay sharp inside",
    "time_warning": "Siren time at sharp inside",
    "trigger_delayed": "Delayed",
    "trigger_direct": "Direct",
    "trigger_mode": "Trigger mode",
    "trigger_values": "Trigger value",
    "tt_alarm": "Include in sharp (fully armed) alarm circuit",
    "tt_delay": "Use silent alarm with delay before full alarm",
    "tt_delay_inside": "Use silent alarm with delay in sharp inside mode",
    "tt_enabled": "Enable or disable this row",
    "tt_inside": "Include in sharp inside (perimeter) circuit",
    "tt_leave": "Trigger during countdown finishes arming immediately",
    "tt_name": "Display name for this entry",
    "tt_name_id": "ioBroker state ID to monitor",
    "tt_negativ": "Invert logic: trigger on false instead of true",
    "tt_notification": "Include in notification circuit (active during night rest)",
    "tt_presence_delay": "Delay before device turns ON",
    "tt_presence_delay_shuffle": "Random multiplier (1-N) for delay variation",
    "tt_presence_delay_unit": "Time unit for delay",
    "tt_presence_length": "How long the device stays ON (duty cycle)",
    "tt_presence_length_shuffle": "Random multiplier (1-N) for duty cycle variation",
    "tt_presence_length_unit": "Time unit for duty cycle",
    "tt_presence_light_lux": "Lux threshold: activate when light is below this value",
    "tt_presence_mode": "Activation mode: time range, sunrise, sunset, or light sensor",
    "tt_presence_time_from": "Start time (HH:MM) for time-based activation",
    "tt_presence_time_to": "End time (HH:MM) for time-based activation",
    "tt_presence_trigger_light": "State ID of light/lux sensor (for light mode)",
    "tt_presence_val_off": "Value to write when turning device OFF (e.g. false, 0)",
    "tt_presence_val_on": "Value to write when turning device ON (e.g. true, 1)",
    "tt_say_0": "Announce sharp inside deactivated",
    "tt_say_1": "Announce after activation",
    "tt_say_2": "Announce after deactivation",
    "tt_say_3": "Announce when activation fails (open circuits)",
    "tt_say_4": "Announce warnings at sharp inside / night rest begin",
    "tt_say_5": "Announce notification circuit changes",
    "tt_say_6": "Announce burglary alarm",
    "tt_say_7": "Announce night rest begins",
    "tt_say_8": "Announce night rest ends",
    "tt_say_9": "Announce changes during night rest",
    "tt_say_9plus": "Announce sharp inside activated",
    "tt_say_fire": "Announce alarm type 1 (e.g. fire)",
    "tt_say_time": "Announce activation countdown",
    "tt_say_water": "Announce alarm type 2 (e.g. water)",
    "tt_say_x": "Announce when activation is aborted",
    "tt_short_name_id": "External state ID to write to when triggered",
    "tt_short_select": "Internal alarm state that triggers this shortcut",
    "tt_short_trigger": "State value that activates this shortcut",
    "tt_short_value": "Value to write to the target state",
    "tt_shortin_name_id": "External state ID that controls the alarm",
    "tt_shortin_select": "Internal alarm action to execute when triggered",
    "tt_shortin_trigger_mode": "any = trigger on every update; ne = only on value change",
    "tt_shortin_value": "Value of external state that triggers the action",
    "tt_speech_delay": "Delay in seconds before speech output",
    "tt_trigger_mode": "Direct: triggers alarm immediately. Delayed: triggers alarm only when multiple delayed sensors trigger within a time window.",
    "user": "User",
    "values": "set values",
    "warning_Chips": "States for warning circuit",
    "words": "Words",
    "zone_one": "Zone one",
    "zone_three": "Zone three",
    "zone_two": "Zone two",
    "zones": "zones"
}