/*!*
 *
 *  Copyright (c) Highsoft AS. All rights reserved.
 *
 *!*/
import * as Highcharts from "../highcharts.src";
declare module "../highcharts.src" {
    /**
     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
     * animation when a series is displayed for the `dataLabels`. The animation
     * can also be set as a configuration object. Please note that this option
     * only applies to the initial animation.
     *
     * For other animations, see chart.animation and the animation parameter
     * under the API methods. The following properties are supported:
     *
     * - `defer`: The animation delay time in milliseconds.
     */
    interface PlotNetworkgraphDataLabelsAnimationOptions {
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
         * milliseconds. Set to `0` to render the data labels immediately. As
         * `undefined` inherits defer time from the series.animation.defer.
         */
        defer?: number;
    }
    interface PlotNetworkgraphLayoutAlgorithmOptions {
        /**
         * (Highcharts) Approximation used to calculate repulsive forces
         * affecting nodes. By default, when calculating net force, nodes are
         * compared against each other, which gives O(N^2) complexity. Using
         * Barnes-Hut approximation, we decrease this to O(N log N), but the
         * resulting graph will have different layout. Barnes-Hut approximation
         * divides space into rectangles via quad tree, where forces exerted on
         * nodes are calculated directly for nearby cells, and for all others,
         * cells are treated as a separate node with center of mass.
         */
        approximation?: Highcharts.OptionsApproximationValue;
        /**
         * (Highcharts) Attraction force applied on a node which is connected to
         * another node by a link. Passed are two arguments:
         *
         * - `d` - which is current distance between two nodes
         *
         * - `k` - which is desired distance between two nodes
         *
         * In `verlet` integration, defaults to: `function (d, k) { return (k -
         * d) / d; }`
         */
        attractiveForce?: Function;
        /**
         * (Highcharts) Experimental. Enables live simulation of the algorithm
         * implementation. All nodes are animated as the forces applies on them.
         */
        enableSimulation?: boolean;
        /**
         * (Highcharts) Friction applied on forces to prevent nodes rushing to
         * fast to the desired positions.
         */
        friction?: number;
        /**
         * (Highcharts) Gravitational const used in the barycenter force of the
         * algorithm.
         */
        gravitationalConstant?: number;
        /**
         * (Highcharts) When `initialPositions` are set to 'circle',
         * `initialPositionRadius` is a distance from the center of circle, in
         * which nodes are created.
         */
        initialPositionRadius?: number;
        /**
         * (Highcharts) Initial layout algorithm for positioning nodes. Can be
         * one of built-in options ("circle", "random") or a function where
         * positions should be set on each node (`this.nodes`) as `node.plotX`
         * and `node.plotY`
         */
        initialPositions?: ("circle"|"random"|Function);
        /**
         * (Highcharts) Integration type. Available options are `'euler'` and
         * `'verlet'`. Integration determines how forces are applied on
         * particles. In Euler integration, force is applied direct as
         * `newPosition += velocity;`. In Verlet integration, new position is
         * based on a previous position without velocity: `newPosition +=
         * previousPosition - newPosition`.
         *
         * Note that different integrations give different results as forces are
         * different.
         *
         * In Highcharts v7.0.x only `'euler'` integration was supported.
         */
        integration?: Highcharts.OptionsIntegrationValue;
        /**
         * (Highcharts) Ideal length (px) of the link between two nodes. When
         * not defined, length is calculated as: `Math.pow(availableWidth *
         * availableHeight / nodesLength, 0.4);`
         *
         * Note: Because of the algorithm specification, length of each link
         * might be not exactly as specified.
         */
        linkLength?: number;
        /**
         * (Highcharts) Max number of iterations before algorithm will stop. In
         * general, algorithm should find positions sooner, but when rendering
         * huge number of nodes, it is recommended to increase this value as
         * finding perfect graph positions can require more time.
         */
        maxIterations?: number;
        /**
         * (Highcharts) Verlet integration only. Max speed that node can get in
         * one iteration. In terms of simulation, it's a maximum translation (in
         * pixels) that node can move (in both, x and y, dimensions). While
         * `friction` is applied on all nodes, max speed is applied only for
         * nodes that move very fast, for example small or disconnected ones.
         */
        maxSpeed?: number;
        /**
         * (Highcharts) Repulsive force applied on a node. Passed are two
         * arguments:
         *
         * - `d` - which is current distance between two nodes
         *
         * - `k` - which is desired distance between two nodes
         *
         * In `verlet` integration, defaults to: `function (d, k) { return (k -
         * d) / d * (k > d ? 1 : 0) }`
         */
        repulsiveForce?: Function;
        /**
         * (Highcharts) Barnes-Hut approximation only. Determines when distance
         * between cell and node is small enough to calculate forces. Value of
         * `theta` is compared directly with quotient `s / d`, where `s` is the
         * size of the cell, and `d` is distance between center of cell's mass
         * and currently compared node.
         */
        theta?: number;
        /**
         * (Highcharts) Type of the algorithm used when positioning nodes.
         */
        type?: "reingold-fruchterman";
    }
    /**
     * (Highcharts) Animation when hovering over the marker.
     */
    interface PlotNetworkgraphMarkerStatesHoverAnimationOptions {
        duration?: number;
    }
    /**
     * (Highcharts) Options for the _Series on point_ feature. Only `pie` and
     * `sunburst` series are supported at this moment.
     */
    interface PlotNetworkgraphOnPointOptions {
        /**
         * (Highcharts) Options for the connector in the _Series on point_
         * feature.
         *
         * In styled mode, the connector can be styled with the
         * `.highcharts-connector-seriesonpoint` class name.
         */
        connectorOptions?: (Highcharts.PlotNetworkgraphOnPointConnectorOptions|Highcharts.SVGAttributes);
        /**
         * (Highcharts) The `id` of the point that we connect the series to.
         * Only points with a given `plotX` and `plotY` values and map points
         * are valid.
         */
        id?: string;
        /**
         * (Highcharts) Options allowing to set a position and an offset of the
         * series in the _Series on point_ feature.
         */
        position?: (object|Highcharts.PlotNetworkgraphOnPointPositionOptions);
    }
    /**
     * (Highcharts) A networkgraph is a type of relationship chart, where
     * connections (links) attracts nodes (points) and other nodes repulse each
     * other.
     *
     * Configuration options for the series are given in three levels:
     *
     * 1. Options for all series in a chart are defined in the
     * plotOptions.series object.
     *
     * 2. Options for all `networkgraph` series are defined in
     * plotOptions.networkgraph.
     *
     * 3. Options for one single series are given in the series instance array.
     * (see online documentation for example)
     *
     * **TypeScript:**
     *
     * - type option should always be set, otherwise a broad set of unsupported
     * options is allowed.
     *
     * - when accessing an array of series, the combined set of all series types
     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
     * specific type can be done by checking the `type` property. (see online
     * documentation for example)
     */
    interface PlotNetworkgraphOptions {
        /**
         * (Highcharts) Accessibility options for a series.
         */
        accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
        /**
         * (Highcharts) Allow this series' points to be selected by clicking on
         * the graphic (columns, point markers, pie slices, map areas etc).
         *
         * The selected points can be handled by point select and unselect
         * events, or collectively by the getSelectedPoints function.
         *
         * And alternative way of selecting points is through dragging.
         */
        allowPointSelect?: boolean;
        /**
         * (Highcharts) An additional class name to apply to the series'
         * graphical elements. This option does not replace default class names
         * of the graphical element. Changes to the series' color will also be
         * reflected in a chart's legend and tooltip.
         */
        className?: string;
        /**
         * (Highcharts) Disable this option to allow series rendering in the
         * whole plotting area.
         *
         * **Note:** Clipping should be always enabled when chart.zoomType is
         * set
         */
        clip?: boolean;
        /**
         * (Highcharts) The main color of the series. In line type series it
         * applies to the line and the point markers unless otherwise specified.
         * In bar type series it applies to the bars unless a color is specified
         * per point. The default value is pulled from the `options.colors`
         * array.
         *
         * In styled mode, the color can be defined by the colorIndex option.
         * Also, the series color can be set with the `.highcharts-series`,
         * `.highcharts-color-{n}`, `.highcharts-{type}-series` or
         * `.highcharts-series-{n}` class, or individual classes given by the
         * `className` option.
         */
        color?: Highcharts.ColorType;
        /**
         * (Highcharts) Styled mode only. A specific color index to use for the
         * series, so its graphic representations are given the class name
         * `highcharts-color-{n}`.
         *
         * Since v11, CSS variables on the form `--highcharts-color-{n}` make
         * changing the color scheme very convenient.
         */
        colorIndex?: number;
        /**
         * (Highcharts, Highstock, Gantt) When true, each point or column edge
         * is rounded to its nearest pixel in order to render sharp on screen.
         * In some cases, when there are a lot of densely packed columns, this
         * leads to visible difference in column widths or distance between
         * columns. In these cases, setting `crisp` to `false` may look better,
         * even though each column is rendered blurry.
         */
        crisp?: boolean;
        /**
         * (Highcharts) You can set the cursor to "pointer" if you have click
         * events attached to the series, to signal to the user that the points
         * and lines can be clicked.
         *
         * In styled mode, the series cursor can be set with the same classes as
         * listed under series.color.
         */
        cursor?: (string|Highcharts.CursorValue);
        /**
         * (Highcharts) A reserved subspace to store options and values for
         * customized functionality. Here you can add additional data for your
         * own event callbacks and formatter callbacks.
         */
        custom?: Highcharts.Dictionary<any>;
        /**
         * (Highcharts) Name of the dash style to use for the graph, or for some
         * series types the outline of each shape.
         *
         * In styled mode, the stroke dash-array can be set with the same
         * classes as listed under series.color.
         */
        dashStyle?: Highcharts.DashStyleValue;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
         * labels, appearing next to each data point.
         *
         * Since v6.2.0, multiple data labels can be applied to each single
         * point by defining them as an array of configs.
         *
         * In styled mode, the data labels can be styled with the
         * `.highcharts-data-label-box` and `.highcharts-data-label` class names
         * (see example).
         */
        dataLabels?: (Highcharts.SeriesNetworkgraphDataLabelsOptionsObject|Array<Highcharts.SeriesNetworkgraphDataLabelsOptionsObject>);
        /**
         * (Highcharts) The mapping between the data table and the series data
         * points. This is used in conjunction with the `dataTable` option (on
         * chart or series level) to map columns from the data table to the
         * properties of the data points. The keys of the `dataMapping` object
         * correspond to the properties of the data points (e.g. `x`, `y`,
         * `name`), and the values are objects that specify which column from
         * which data table to use for that property.
         *
         * The keys can also be nested paths, for example `dataLabel.format`, to
         * map to nested properties of the data points.
         *
         * The values can also be strings, in which case they are interpreted as
         * column id's from the first data table.
         *
         * A typical use case is that multiple series share a common column,
         * like `name` or `x`. In this case, to avoid repetition, the common
         * column can be applied in `plotOptions.series.dataMapping` and the
         * individual series can specify only the columns that are unique to
         * them.
         *
         * The series name defaults to the column ID of the main data column in
         * the mapping. The main data column is typically the `y` data for
         * cartesian series, or `value` for map series. For example, if the
         * mapping is `{ y: 'Cost' }`, the series name will be `Cost`. (see
         * online documentation for example)
         *
         * If the columns of the DataTable have keys matching the series keys,
         * the data mapping is not necessary. For example, this DataTable will
         * connect directly to the series' `x` and `y` keys: (see online
         * documentation for example)
         */
        dataMapping?: Highcharts.DataMappingOptionsObject;
        /**
         * (Highcharts) Deprecated. Use
         * plotOptions.series.accessibility.description instead.
         *
         * A description of the series to add to the screen reader information
         * about the series.
         *
         * @deprecated 8.0.0
         */
        description?: string;
        /**
         * (Highcharts) Flag to determine if nodes are draggable or not.
         */
        draggable?: boolean;
        /**
         * (Highcharts) Enable or disable the mouse tracking for a specific
         * series. This includes point tooltips and click events on graphs and
         * points. For large datasets it improves performance.
         */
        enableMouseTracking?: boolean;
        /**
         * (Highcharts) General event handlers for the series items. These event
         * hooks can also be attached to the series at run time using the
         * `Highcharts.addEvent` function.
         */
        events?: Highcharts.SeriesEventsOptionsObject;
        /**
         * (Highcharts) Determines whether the series should look for the
         * nearest point in both dimensions or just the x-dimension when
         * hovering the series. Defaults to `'xy'` for scatter series and `'x'`
         * for most other series. If the data has duplicate x-values, it is
         * recommended to set this to `'xy'` to allow hovering over all points.
         *
         * Applies only to series types using nearest neighbor search (not
         * direct hover) for tooltip.
         */
        findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue;
        /**
         * (Highcharts, Highstock) Defines when to display a gap in the graph,
         * together with the gapUnit option.
         *
         * In case when `dataGrouping` is enabled, points can be grouped into a
         * larger time span. This can make the grouped points to have a greater
         * distance than the absolute value of `gapSize` property, which will
         * result in disappearing graph completely. To prevent this situation
         * the mentioned distance between grouped points is used instead of
         * previously defined `gapSize`.
         *
         * In practice, this option is most often used to visualize gaps in time
         * series. In a stock chart, intraday data is available for daytime
         * hours, while gaps will appear in nights and weekends.
         */
        gapSize?: number;
        /**
         * (Highcharts, Highstock) Together with gapSize, this option defines
         * where to draw gaps in the graph.
         *
         * When the `gapUnit` is `"relative"` (default), a gap size of 5 means
         * that if the distance between two points is greater than 5 times that
         * of the two closest points, the graph will be broken.
         *
         * When the `gapUnit` is `"value"`, the gap is based on absolute axis
         * values, which on a datetime axis is milliseconds. This also applies
         * to the navigator series that inherits gap options from the base
         * series.
         */
        gapUnit?: Highcharts.OptionsGapUnitValue;
        /**
         * (Highcharts) Highlight only the hovered point and fade the remaining
         * points.
         *
         * Scatter-type series require enabling the 'inactive' marker state and
         * adjusting opacity. Note that this approach could affect performance
         * with large datasets.
         */
        inactiveOtherPoints?: boolean;
        /**
         * (Highcharts) When set to `false` will prevent the series data from
         * being included in any form of data export.
         *
         * Since version 6.0.0 until 7.1.0 the option was existing undocumented
         * as `includeInCSVExport`.
         */
        includeInDataExport?: boolean;
        /**
         * (Highcharts) An array specifying which option maps to which key in
         * the data point array. This makes it convenient to work with
         * unstructured data arrays from different sources.
         */
        keys?: Array<string>;
        layoutAlgorithm?: Highcharts.PlotNetworkgraphLayoutAlgorithmOptions;
        /**
         * (Highcharts) What type of legend symbol to render for this series.
         * Can be one of `areaMarker`, `lineMarker` or `rectangle`.
         */
        legendSymbol?: Highcharts.OptionsLegendSymbolValue;
        /**
         * (Highcharts, Highstock, Highmaps) Defines the color of the legend
         * symbol for this series. Defaults to undefined, in which case the
         * series color is used. Does not work with styled mode.
         */
        legendSymbolColor?: Highcharts.ColorType;
        /**
         * (Highcharts, Highstock) Pixel width of the graph line.
         */
        lineWidth?: number;
        /**
         * (Highcharts) Link style options
         */
        link?: Highcharts.PlotNetworkgraphLinkOptions;
        /**
         * (Highcharts, Highstock, Gantt) The id of another series to link to.
         * Additionally, the value can be ":previous" to link to the previous
         * series. When two series are linked, only the first one appears in the
         * legend. Toggling the visibility of this also toggles the linked
         * series.
         *
         * If master series uses data sorting and linked series does not have
         * its own sorting definition, the linked series will be sorted in the
         * same order as the master one.
         *
         * If a `compare` value is not set on a linked series, it will be
         * inherited from the parent series.
         */
        linkedTo?: string;
        /**
         * (Highcharts) Options for the point markers of line and scatter-like
         * series. Properties like `fillColor`, `lineColor` and `lineWidth`
         * define the visual appearance of the markers. The `symbol` option
         * defines the shape. Other series types, like column series, don't have
         * markers, but have visual options on the series level instead.
         *
         * In styled mode, the markers can be styled with the
         * `.highcharts-point`, `.highcharts-point-hover` and
         * `.highcharts-point-select` class names.
         */
        marker?: Highcharts.PointMarkerOptionsObject;
        /**
         * (Highcharts, Highstock) Whether or not data-points with the value of
         * `null` should be interactive. When this is set to `true`, tooltips
         * may highlight these points, and this option also enables keyboard
         * navigation for such points. Format options for such points include
         * `nullFormat` and `nullFormatter`. Works for these series: `line`,
         * `spline`, `area`, `area-spline`, `column`, `bar`, and `timeline`.
         */
        nullInteraction?: (boolean|undefined);
        /**
         * (Highcharts) Options for the _Series on point_ feature. Only `pie`
         * and `sunburst` series are supported at this moment.
         */
        onPoint?: (object|Highcharts.PlotNetworkgraphOnPointOptions);
        /**
         * (Highcharts) Opacity of a series parts: line, fill (e.g. area) and
         * dataLabels.
         */
        opacity?: number;
        /**
         * (Highcharts) Properties for each single point.
         */
        point?: Highcharts.PlotSeriesPointOptions;
        /**
         * (Highcharts) Deprecated. Use
         * series.accessibility.point.descriptionFormat instead.
         *
         * Same as accessibility.point.descriptionFormat, but for an individual
         * series. Overrides the chart wide configuration.
         *
         * @deprecated 12.6.0
         */
        pointDescriptionFormat?: Function;
        /**
         * (Highcharts) Deprecated. Use
         * series.accessibility.point.descriptionFormatter instead.
         *
         * Same as accessibility.series.descriptionFormatter, but for an
         * individual series. Overrides the chart wide configuration.
         *
         * @deprecated 8.0.0
         */
        pointDescriptionFormatter?: Function;
        /**
         * (Highcharts, Highstock) When true, X values in the data set are
         * relative to the current `pointStart`, `pointInterval` and
         * `pointIntervalUnit` settings. This allows compression of the data for
         * datasets with irregular X values.
         *
         * The real X values are computed on the formula `f(x) = ax + b`, where
         * `a` is the `pointInterval` (optionally with a time unit given by
         * `pointIntervalUnit`), and `b` is the `pointStart`.
         */
        relativeXValue?: boolean;
        /**
         * (Highcharts) Whether to select the series initially. If
         * `showCheckbox` is true, the checkbox next to the series name in the
         * legend will be checked for a selected series.
         */
        selected?: boolean;
        /**
         * (Highcharts) Whether to apply a drop shadow to the graph line. Since
         * 2.3 the shadow can be an object configuration containing `color`,
         * `offsetX`, `offsetY`, `opacity` and `width`.
         *
         * Note that in some cases, like stacked columns or other dense layouts,
         * the series may cast shadows on each other. In that case, the
         * `chart.seriesGroupShadow` allows applying a common drop shadow to the
         * whole series group.
         */
        shadow?: (boolean|Highcharts.ShadowOptionsObject);
        /**
         * (Highcharts) If true, a checkbox is displayed next to the legend item
         * to allow selecting the series. The state of the checkbox is
         * determined by the `selected` option.
         */
        showCheckbox?: boolean;
        /**
         * (Highcharts) Whether to display this particular series or series type
         * in the legend. Standalone series are shown in legend by default, and
         * linked series are not. Since v7.2.0 it is possible to show series
         * that use colorAxis by setting this option to `true`.
         */
        showInLegend?: boolean;
        /**
         * (Highcharts) Deprecated. Use series.accessibility.keyboardNavigation
         * instead.
         *
         * If set to `true`, the accessibility module will skip past the points
         * in this series for keyboard navigation.
         *
         * @deprecated 8.0.0
         */
        skipKeyboardNavigation?: boolean;
        /**
         * (Highcharts) Sonification/audio chart options for a series.
         */
        sonification?: Highcharts.SeriesSonificationOptions;
        /**
         * (Highcharts) A collection of options for different series states.
         */
        states?: Highcharts.SeriesStatesOptionsObject;
        /**
         * (Highcharts) Sticky tracking of mouse events. When true, the
         * `mouseOut` event on a series isn't triggered until the mouse moves
         * over another series, or out of the plot area. When false, the
         * `mouseOut` event on a series is triggered when the mouse leaves the
         * area around the series' graph or markers. This also implies the
         * tooltip when not shared. When `stickyTracking` is false and
         * `tooltip.shared` is false, the tooltip will be hidden when moving the
         * mouse between series. Defaults to true for line and area type series,
         * but to false for columns, pies etc.
         *
         * **Note:** The boost module will force this option because of
         * technical limitations.
         */
        stickyTracking?: boolean;
        /**
         * (Highcharts) A configuration object for the tooltip rendering of each
         * single series. Properties are inherited from tooltip, but only the
         * following properties can be defined on a series level.
         */
        tooltip?: Highcharts.SeriesTooltipOptionsObject;
        /**
         * (Highcharts, Highstock, Gantt) When a series contains a `data` array
         * that is longer than this, the Series class looks for data
         * configurations of plain numbers or arrays of numbers. The first and
         * last valid points are checked. If found, the rest of the data is
         * assumed to be the same. This saves expensive data checking and
         * indexing in long series, and makes data-heavy charts render faster.
         *
         * Set it to `0` disable.
         *
         * Note:
         *
         * - In boost mode turbo threshold is forced. Only array of numbers or
         * two dimensional arrays are allowed.
         *
         * - In version 11.4.3 and earlier, if object configurations were passed
         * beyond the turbo threshold, a warning was logged in the console and
         * the data series didn't render.
         */
        turboThreshold?: number;
        /**
         * (Highcharts) Set the initial visibility of the series.
         */
        visible?: boolean;
        /**
         * (Highcharts, Highstock) An array defining zones within a series.
         * Zones can be applied to the X axis, Y axis or Z axis for bubbles,
         * according to the `zoneAxis` option. The zone definitions have to be
         * in ascending order regarding to the value.
         *
         * In styled mode, the color zones are styled with the
         * `.highcharts-zone-{n}` class, or custom classed from the `className`
         * option (view live demo).
         */
        zones?: Array<Highcharts.SeriesZonesOptionsObject>;
        /**
         * (Highcharts) Whether to zoom non-cartesian series. If `chart.zooming`
         * is set, the option allows to disable zooming on an individual
         * non-cartesian series. By default zooming is enabled for all series.
         *
         * **Note**: This option works only for non-cartesian series.
         */
        zoomEnabled?: boolean;
    }
    /**
     * (Highcharts) Animation when not hovering over the node.
     */
    interface PlotNetworkgraphStatesInactiveAnimationOptions {
        duration?: number;
    }
    /**
     * (Highcharts, Highstock, Gantt) For series on datetime axes, the date
     * format in the tooltip's header will by default be guessed based on the
     * closest data points. This member gives the default string representations
     * used for each unit. For an overview of the string or object
     * configuration, see dateFormat.
     */
    interface PlotNetworkgraphTooltipDateTimeLabelFormatsOptions {
        day?: string;
        hour?: string;
        millisecond?: string;
        minute?: string;
        month?: string;
        second?: string;
        week?: string;
        year?: string;
    }
    /**
     * (Highcharts) Positioning options for fixed tooltip, taking effect only
     * when tooltip.fixed is `true`.
     */
    interface PlotNetworkgraphTooltipPositionOptions {
        /**
         * (Highcharts) The horizontal alignment of the fixed tooltip.
         */
        align?: Highcharts.AlignValue;
        /**
         * (Highcharts) What the fixed tooltip alignment should be relative to.
         *
         * The default, `pane`, means that it is aligned within the plot area
         * for that given series. If the tooltip is split (as default in Stock
         * charts), each partial tooltip is aligned within the series' pane.
         */
        relativeTo?: Highcharts.OptionsRelativeToValue;
        /**
         * (Highcharts) The vertical alignment of the fixed tooltip.
         */
        verticalAlign?: Highcharts.VerticalAlignValue;
        /**
         * (Highcharts) X pixel offset from the given position. Can be used to
         * shy away from axis lines, grid lines etc to avoid the tooltip
         * overlapping other elements.
         */
        x?: number;
        /**
         * (Highcharts) Y pixel offset from the given position. Can be used to
         * shy away from axis lines, grid lines etc to avoid the tooltip
         * overlapping other elements.
         */
        y?: number;
    }
    /**
     * (Highcharts) Enable or disable the initial animation when a series is
     * displayed for the `dataLabels`. The animation can also be set as a
     * configuration object. Please note that this option only applies to the
     * initial animation.
     *
     * For other animations, see chart.animation and the animation parameter
     * under the API methods. The following properties are supported:
     *
     * - `defer`: The animation delay time in milliseconds.
     */
    interface SeriesNetworkgraphDataDataLabelsAnimationOptions {
        /**
         * (Highcharts) The animation delay time in milliseconds. Set to `0` to
         * render the data labels immediately. As `undefined` inherits defer
         * time from the series.animation.defer.
         */
        defer?: number;
    }
    /**
     * (Highcharts) Animation when hovering over the marker.
     */
    interface SeriesNetworkgraphNodesMarkerStatesHoverAnimationOptions {
        duration?: number;
    }
    /**
     * (Highcharts) A `networkgraph` series. If the type option is not
     * specified, it is inherited from chart.type.
     *
     * Configuration options for the series are given in three levels:
     *
     * 1. Options for all series in a chart are defined in the
     * plotOptions.series object.
     *
     * 2. Options for all `networkgraph` series are defined in
     * plotOptions.networkgraph.
     *
     * 3. Options for one single series are given in the series instance array.
     * (see online documentation for example)
     *
     * **TypeScript:**
     *
     * - type option should always be set, otherwise a broad set of unsupported
     * options is allowed.
     *
     * - when accessing an array of series, the combined set of all series types
     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
     * specific type can be done by checking the `type` property. (see online
     * documentation for example)
     *
     * You have to extend the `SeriesNetworkgraphOptions` via an interface to
     * allow custom properties: ``` declare interface SeriesNetworkgraphOptions
     * { customProperty: string; }
     *
     */
    interface SeriesNetworkgraphOptions extends Highcharts.PlotNetworkgraphOptions, Highcharts.SeriesOptions {
        /**
         * (Highcharts) An array of data points for the series. For the
         * `networkgraph` series type, points can be given in the following way:
         *
         * An array of objects with named values. The following snippet shows
         * only a few settings, see the complete options set below. If the total
         * number of data points exceeds the series' turboThreshold, this option
         * is not available. (see online documentation for example)
         */
        data?: (Highcharts.PointOptionsObject|Array<(object|any[]|number)>);
        /**
         * (Highcharts) A collection of options for the individual nodes. The
         * nodes in a networkgraph diagram are auto-generated instances of
         * `Highcharts.Point`, but options can be applied here and linked by the
         * `id`.
         */
        nodes?: Array<Highcharts.SeriesNetworkgraphNodesOptions>;
        /**
         * Not available
         */
        stack?: undefined;
        /**
         * (Highcharts, Highstock, Highmaps, Gantt) This property is only in
         * TypeScript non-optional and might be `undefined` in series objects
         * from unknown sources.
         */
        type: "networkgraph";
        /**
         * Not available
         */
        xAxis?: undefined;
        /**
         * Not available
         */
        yAxis?: undefined;
    }
}