export declare enum PairingId { /** * Switch On/Off * Binary Switch value */ AL_SWITCH_ON_OFF = 1, /** * Timed Start/Stop * For staircase lighning or movement detection */ AL_TIMED_START_STOP = 2, /** * Force-position * Forces value dependent high priority on or off state */ AL_FORCED = 3, /** * Scene Control * Recall or learn the set value related to encoded scene number */ AL_SCENE_CONTROL = 4, /** * Movement under consideration of brightness * Activation of an autonomous switch off function triggered by an movement detector */ AL_TIMED_MOVEMENT = 6, /** * Presence * Announces presence triggered by an movement detector to be used by e.g. RTCs. * Is independent of brightness and can be used for alerts e.g. */ AL_TIMED_PRESENCE = 7, /** * Relative Set Value * Relative dimming value */ AL_RELATIVE_SET_VALUE_CONTROL = 16, /** * Absolute Set Value * Absolute control of the set value */ AL_ABSOLUTE_SET_VALUE_CONTROL = 17, /** * Night * Toggle between day and night (where day = 0 / night = 1) */ AL_NIGHT = 18, /** * invalid string id * Resets load failures / short circuits / etc */ AL_RESET_ERROR = 19, /** * RGB color * RGB Color coded in three bytes */ AL_RGB = 21, /** * Color Temperature * Color temperature */ AL_COLOR_TEMPERATURE = 22, /** * HSV * Hue (2 Byte) / Saturation (1 Byte) / Value (1 Byte / brightness) */ AL_HSV = 23, /** * HUE * Hue (2 Byte) */ AL_COLOR = 24, /** * Saturation * Saturation (1 Byte) */ AL_SATURATION = 25, /** * Move Up/Down * Moves sunblind up (0) and down (1) */ AL_MOVE_UP_DOWN = 32, /** * Adjust Up/Down * Stops the sunblind and to step it up/down */ AL_STOP_STEP_UP_DOWN = 33, /** * Set Absolute Position Blinds * Moves the sunblinds into a specified position */ AL_SET_ABSOLUTE_POSITION_BLINDS_PERCENTAGE = 35, /** * Set Absolute Position Slats * Moves the slats into a specified position */ AL_SET_ABSOLUTE_POSITION_SLATS_PERCENTAGE = 36, /** * Wind Alarm * State of the wind sensor (sent cyclically and on COV) * Moves the sunblind to a secure position and to block it for any further control */ AL_WIND_ALARM = 37, /** * Frost Alarm * State of the frost sensor (sent cyclically and on COV) * Moves the sunblind to a secure position and to block it for any further control */ AL_FROST_ALARM = 38, /** * Rain Alarm * State of the rain sensor (sent cyclically and on COV) */ AL_RAIN_ALARM = 39, /** * Force-position blind * Forces value dependent high priority up or down state */ AL_FORCED_UP_DOWN = 40, /** * Window/Door position * Delivers position for Window/Door (Open / Tilted / Closed) */ AL_WINDOW_DOOR_POSITION = 41, /** * Actuating Value Heating * Determines the through flow volume of the control valve */ AL_ACTUATING_VALUE_HEATING = 48, /** * Fan Level Heating * Display value of the fan coil speed. (0=off / 1=lowest - 5=fastest) */ AL_FAN_COIL_LEVEL = 49, /** * Actuating Value Cooling * Determines the through flow volume of the control valve */ AL_ACTUATING_VALUE_COOLING = 50, /** * Set Value Temperature * Defines the displayed set point temperature of the system */ AL_SET_POINT_TEMPERATURE = 51, /** * Relative Set Point Temperature * Defines the relative set point temperature of the system */ AL_RELATIVE_SET_POINT_TEMPERATURE = 52, /** * Window/Door * Open = 1 / closed = 0 */ AL_WINDOW_DOOR = 53, /** * Status indication * states: on/off heating/cooling; eco/comfort; frost/not frost */ AL_STATE_INDICATION = 54, /** * Fan Manual Heating On/Off * Switches Fan in manual control mode (master to slave) */ AL_FAN_MANUAL_ON_OFF = 55, /** * Controller On/Off * Switches controller on or off. Off means protection mode */ AL_CONTROLLER_ON_OFF = 56, /** * Relative Set Point Request * Request for a new relative set point value */ AL_RELATIVE_SET_POINT_REQUEST = 57, /** * Eco mode On/Off Request * Switches eco mode on or off */ AL_ECO_ON_OFF = 58, /** * Comfort Temperature * Sends the current comfort temperature */ AL_COMFORT_TEMPERATURE = 59, /** * Fan Level Request * Request for a new manual fan stage */ AL_FAN_STAGE_REQUEST = 64, /** * Fan Manual On/Off Request * WARNING: DO NOT USE!!!! Request for switching fan in manual/auto mode */ AL_FAN_MANUAL_ON_OFF_REQUEST = 65, /** * Controller On/Off Request * Request for switching controller on or off. Off means protection mode */ AL_CONTROLLER_ON_OFF_REQUEST = 66, /** * Eco mode On/Off Request * Indicates ECO mode */ AL_ECO_ON_OFF_INDICATION = 68, /** * Info On/Off * Reflects the binary state of the actuator */ AL_INFO_ON_OFF = 256, /** * Force-position info * Indicates the cause of forced operation (0 = not forced) */ AL_INFO_FORCE = 257, /** * SysAP-InfoOnOff * Reflects the binary state of the actuator group */ AL_SYSAP_INFO_ON_OFF = 261, /** * SysAP-InfoForce * Indicates whether the actuator group is forced (1) or not forced (0) */ AL_SYSAP_INFO_FORCE = 262, /** * Info Actual Dimming Value * Reflects the actual value of the actuator */ AL_INFO_ACTUAL_DIMMING_VALUE = 272, /** * Info Error * Indicates load failures / short circuits / etc */ AL_INFO_ERROR = 273, /** * SysAP-InfoCurrentDimmingValue * Reflects the actual value of the actuator group */ AL_SYSAP_INFO_ACTUAL_DIMMING_VALUE = 277, /** * SysAP-InfoError * Indicates load failures / short circuits / etc */ AL_SYSAP_INFO_ERROR = 278, /** * Info Color Temperature * Color temperature */ AL_INFO_COLOR_TEMPERATURE = 280, /** * SysAP-Info Color Temperature * Color temperature */ AL_SYSAP_INFO_COLOR_TEMPERATURE = 282, /** * Info HSV * Hue (2 Byte) Saturation (1 Byte); Value (1 Byte - brightness) */ AL_INFO_HSV = 283, /** * SysAP Info HSV * Hue (2 Byte) Saturation (1 Byte); Value (1 Byte - brightness) */ AL_SYSAP_INFO_HSV = 284, /** * Info Color Mode * hsv or ct */ AL_INFO_COLOR_MODE = 285, /** * SysAP Info Color Mode * hsv or ct */ AL_SYSAP_INFO_COLOR_MODE = 286, /** * Info Move Up/Down * Indicates last moving direction and whether moving currently or not */ AL_INFO_MOVE_UP_DOWN = 288, /** * Current Absolute Position Blinds Percentage * Indicate the current position of the sunblinds in percentage */ AL_CURRENT_ABSOLUTE_POSITION_BLINDS_PERCENTAGE = 289, /** * Current Absolute Position Slats Percentage * Indicate the current position of the slats in percentage */ AL_CURRENT_ABSOLUTE_POSITION_SLATS_PERCENTAGE = 290, /** * SysAP-InfoMoveUpDown * Indicates last moving direction and whether moving currently or not of the actuator group */ AL_SYSAP_INFO_MOVE_UP_DOWN = 293, /** * SysAP-InfoCurrentAbsoluteBlindsPercentage * indicate the current position of the sunblinds in percentage of the actuator group */ AL_SYSAP_CURRENT_ABSOLUTE_POSITION_BLINDS_PERCENTAGE = 294, /** * SysAP-InfoCurrentAbsoluteSlatsPercentage * indicate the current position of the slats in percentage of the actuator group */ AL_SYSAP_CURRENT_ABSOLUTE_POSITION_SLATS_PERCENTAGE = 295, /** * Measured Temperature * Indicates the actual measured temperature */ AL_MEASURED_TEMPERATURE = 304, /** * Info Value Heating * States the current flow volume of the conrol valve */ AL_INFO_VALUE_HEATING = 305, /** * Info value cooling * States the current flow volume of the conrol valve */ AL_INFO_VALUE_COOLING = 306, /** * Switchover heating/cooling * switch between heating and cooling: heating = 0 / cooling = 1 */ AL_HEATING_COOLING = 309, /** * Actuating Fan Stage Heating * Requests a new manual fan stage from actuator in heating mode */ AL_ACTUATING_FAN_STAGE_HEATING = 310, /** * Absolute setpoint temperature * Absolute set point temperature input for timer */ AL_INFO_ABSOLUTE_SET_POINT_REQUEST = 320, /** * Additional heating value info * Feedback */ AL_INFO_ACTUATING_VALUE_ADD_HEATING = 321, /** * Additional cooling value info * Feedback */ AL_INFO_ACTUATING_VALUE_ADD_COOLING = 322, /** * Control value additional heating * */ AL_ACTUATING_VALUE_ADD_HEATING = 323, /** * Control value additional cooling * */ AL_ACTUATING_VALUE_ADD_COOLING = 324, /** * Info Actuating Fan Stage Heating * Feedback from FCA */ AL_INFO_FAN_ACTUATING_STAGE_HEATING = 325, /** * Info Actuating Fan Manual On/Off Heating * Feedback from FCA */ AL_INFO_FAN_MANUAL_ON_OFF_HEATING = 326, /** * Actuating Fan Stage Cooling * Requests a new manual fan stage from actuator in cooling mode */ AL_ACTUATING_FAN_STAGE_COOLING = 327, /** * Info Fan Stage Cooling * Feedback for current fan stage in cooling mode */ AL_INFO_FAN_ACTUATING_STAGE_COOLING = 329, /** * Info Fan Manual On/Off Cooling * Feedback for manual fan control cooling mode */ AL_INFO_FAN_MANUAL_ON_OFF_COOLING = 330, /** * Heating active * */ AL_HEATING_ACTIVE = 331, /** * Cooling active * */ AL_COOLING_ACTIVE = 332, /** * Heating demand * */ AL_HEATING_DEMAND = 333, /** * Cooling demand * */ AL_COOLING_DEMAND = 334, /** * Heating demand feedback signal * */ AL_INFO_HEATING_DEMAND = 335, /** * Cooling demand feedback signal * */ AL_INFO_COOLING_DEMAND = 336, /** * Humidity * Measured Humidity */ AL_HUMIDITY = 337, /** * Aux On/Off request * Aux On/Off request */ AL_AUX_ON_OFF_REQUEST = 338, /** * Aux On/Off response * Aux On/Off response */ AL_AUX_ON_OFF_RESPONSE = 339, /** * Heating On/Off request * Heating On/Off request */ AL_HEATING_ON_OFF_REQUEST = 340, /** * Cooling On/Off request * Cooling On/Off request */ AL_COOLING_ON_OFF_REQUEST = 341, /** * Operation mode * */ AL_INFO_OPERATION_MODE = 342, /** * Swing H/V * */ AL_INFO_SWING_MODE = 343, /** * Supported features * */ AL_SUPPORTED_FEATURES = 344, /** * Extended Status Indication * */ AL_EXTENDED_STATUS = 345, /** * Extended Status Indication * */ AL_EXTENDED_STATUS_US = 346, /** * Aux Heating On Off Request * */ AL_AUX_HEATING_ON_OFF_REQUEST = 347, /** * Emergency Heating On Off Request * */ AL_EMERGENCY_HEATING_ON_OFF_REQUEST = 348, /** * Relative fan speed control * Relative control of the set value */ AL_RELATIVE_FAN_SPEED_CONTROL = 352, /** * Absolute fan speed control * Absolute control of the set value */ AL_ABSOLUTE_FAN_SPEED_CONTROL = 353, /** * Info absolute fan speed * Reflects the actual value of the actuator */ AL_INFO_ABSOLUTE_FAN_SPEED = 354, /** * SysAP-InfoActualFanSpeed * Reflects the actual value of the actuator */ AL_SYSAP_INFO_ABSOLUTE_FAN_SPEED = 355, /** * Notification flags * Notifications of RF devices (e. g. Battery low) */ AL_NOTIFICATION_FLAGS = 416, /** * Power RC * Bool Value 1 */ AL_BOOL_VALUE_1 = 640, /** * Power RH * Bool Value 2 */ AL_BOOL_VALUE_2 = 641, /** * Proximity status * Bool Value 3 */ AL_BOOL_VALUE_3 = 642, /** * Brightness sensor * Scaling Value 1 */ AL_SCALING_VALUE_1 = 656, /** * Last touch * Scaling Value 2 */ AL_SCALING_VALUE_2 = 657, /** * LED backlighting night mode * Scaling Value 3 */ AL_SCALING_VALUE_3 = 658, /** * Locator beep * Locator Beep */ AL_LOCATOR_BEEP = 704, /** * Switch test alarm * Switch Test Alarm */ AL_SWITCH_TEST_ALARM = 705, /** * Fire alarm active * Fire-Alarm Active */ AL_FIRE_ALARM_ACTIVE = 707, /** * Outside temperature * Outdoor Temperature */ AL_OUTDOOR_TEMPERATURE = 1024, /** * Wind force * Wind force */ AL_WIND_FORCE = 1025, /** * Brightness alarm * Brightness alarm */ AL_BRIGHTNESS_ALARM = 1026, /** * Lux value * Weatherstation brightness level */ AL_BRIGHTNESS_LEVEL = 1027, /** * Wind speed * Wind speed */ AL_WIND_SPEED = 1028, /** * Rain detection * */ AL_RAIN_SENSOR_ACTIVATION_PERCENTAGE = 1029, /** * Rain sensor frequency * */ AL_RAIN_SENSOR_FREQUENCY = 1030, /** * Play * Start playing */ AL_MEDIA_PLAY = 1088, /** * Pause * Pause/Stop playing */ AL_MEDIA_PAUSE = 1089, /** * Next * Play next title */ AL_MEDIA_NEXT = 1090, /** * Previous * Play previous title */ AL_MEDIA_PREVIOUS = 1091, /** * Play mode * Play mode (shuffle / repeat) */ AL_MEDIA_PLAY_MODE = 1092, /** * Mute * Mute (1) and unmute (0) a player */ AL_MEDIA_MUTE = 1093, /** * Relative volume control * Relative volume control. See also relative dimming */ AL_RELATIVE_VOLUME_CONTROL = 1094, /** * Absolute volume control * Set player volume */ AL_ABSOLUTE_VOLUME_CONTROL = 1095, /** * Group membership * */ AL_GROUP_MEMBERSHIP = 1096, /** * Play favorite * */ AL_PLAY_FAVORITE = 1097, /** * Play next favorite * */ AL_PLAY_NEXT_FAVORITE = 1098, /** * Playback status * */ AL_PLAYBACK_STATUS = 1120, /** * Current item metadata info * */ AL_INFO_MEDIA_CURRENT_ITEM_METADATA = 1121, /** * Info mute * */ AL_INFO_MUTE = 1122, /** * Info actual volume * */ AL_INFO_ACTUAL_VOLUME = 1123, /** * Allowed playback actions * */ AL_ALLOWED_PLAYBACK_ACTIONS = 1124, /** * Info group membership * */ AL_INFO_GROUP_MEMBERSHIP = 1125, /** * Info playing favorite * */ AL_INFO_PLAYING_FAVORITE = 1126, /** * Absolute Group Volume Control * */ AL_ABSOLUTE_GROUP_VOLUME_CONTROL = 1127, /** * Info Absolute Group Volume * */ AL_INFO_ABSOLUTE_GROUP_VOLUME = 1128, /** * Media source * */ AL_INFO_CURRENT_MEDIA_SOURCE = 1129, /** * Solar power production * Power from the sun */ AL_SOLAR_POWER_PRODUCTION = 1184, /** * Inverter output power * Output power of inverter (pbatt+Psun) */ AL_INVERTER_OUTPUT_POWER = 1185, /** * Solar energy (today) * Produced Energy */ AL_SOLAR_ENERGY_TODAY = 1186, /** * Injected energy (today) * Energy into the grid */ AL_INJECTED_ENERGY_TODAY = 1187, /** * Purchased energy (today) * Energy from the grid */ AL_PURCHASED_ENERGY_TODAY = 1188, /** * Inverter alarm * Inverter is working in stand alone mode */ AL_NOTIFICATION_RUN_STANDALONE = 1189, /** * Self-consumption * production PV/ Total consumption */ AL_SELF_CONSUMPTION = 1190, /** * Self-sufficiency * Consumption from PV/ Total consumption */ AL_SELF_SUFFICIENCY = 1191, /** * Home power consumption * Power in home (PV and grid) */ AL_HOME_POWER_CONSUMPTION = 1192, /** * Power to grid * Power from and to the grid: Purchased (less than 0), Injection (more than 0) */ AL_POWER_TO_GRID = 1193, /** * Consumed energy (today) * Energy bought from grid per day */ AL_CONSUMED_ENERGY_TODAY = 1194, /** * Meter alarm * Meter communication loss */ AL_NOTIFICATION_METER_COMMUNICATION_ERROR_WARNING = 1195, /** * Battery level * Battery level */ AL_SOC = 1196, /** * Battery power * Batter power: Discharge (less then 0), Charge (more then 0) */ AL_BATTERY_POWER = 1197, /** * Boost * 1: Boost enable request, 0: boost disable request */ AL_BOOST_ENABLE_REQUEST = 1200, /** * Stop charging reuqest * 1: Stop charging session requested, 0: n/a so far, will be resetted when cable is unplugged */ AL_STOP_CHARGING_SESSIONS_REQUEST = 1201, /** * Enable charging reuqest * 1: Enable charging when cable is plugged in, 0: Disable next charging session but charge until cable is plugged */ AL_STOP_ENABLE_CHARGING_REQUEST = 1202, /** * Info boost * 1: Boost enabled, 0: boost disabled */ AL_INFO_BOOST = 1203, /** * Info wallbox status * Wallbox status 00000001: car plugged in, * 00000002: Authorization granted, * 00000004: Not charging, battery fully loaded, * 40000000: charging stopped due to blackout prevention, * 80000000: Ground fault error */ AL_INFO_WALLBOX_STATUS = 1204, /** * Info charging * 1: Charging, 0: Not charging */ AL_INFO_CHARGING = 1205, /** * Info charging enabled * 1: Charging enabled for next session, 0: Charging disabled for next session */ AL_INFO_CHARGING_ENABLED = 1206, /** * Info installed power * Installed power (e.g. 20 kW) */ AL_INFO_INSTALLED_POWER = 1207, /** * Info transmitted energy * Energy transmitted so far per session (in Wh) */ AL_INFO_ENERGY_TRANSMITTED = 1208, /** * Info car range * Car range in km per sessions */ AL_INFO_CAR_RANGE = 1209, /** * Info charging duration * Start of charging session (in minutes in UTC) */ AL_INFO_START_OF_CHARGING_SESSION = 1210, /** * Info current limit * Limit for charger (in kW) */ AL_INFO_LIMIT_FOR_CHARGER = 1211, /** * Info current limit for group * Limit for group of charger (in kW) */ AL_INFO_LIMIT_FOR_CHARGER_GROUP = 1212, /** * Album cover URL * Album cover URL */ AL_INFO_ALBUM_COVER_URL = 1213, /** * secure@home Central Unit * Encrypted control datapoint for domus alarm center */ AL_DISARM_SYSTEM = 1281, /** * DomusDisarmCounter * Info about the next counter to disarm the system */ AL_DISARM_COUNTER = 1282, /** * Intrusion Alarm * Intrusion Alarm */ AL_INFO_INTRUSION_ALARM = 1284, /** * Safety Alarm * Safety Alarm */ AL_INFO_SAFETY_ALARM = 1285, /** * InfoConfigurationStatus * Domus alarm device negative feedback and configuration info. */ AL_INFO_ERROR_STATUS = 1287, /** * Enable configuration * Encrypted control datapoint for entering configuration mode */ AL_ENABLE_CONFIGURATION = 1288, /** * Disarming LED * Arm/Disarm a Zone */ AL_DOMUS_ZONE_CONTROL = 1289, /** * AES Key * Manufacturer ID + Serial + AES Key */ AL_DOMUS_KEY_INFO = 1290, /** * Zone status * Zone status */ AL_ZONE_STATUS = 1291, /** * Time * Absolute number of seconds when the zone will be armed */ AL_DOMUS_DISARM_DELAY_TIME = 1294, /** * Start / Stop * Starts / Stops operation */ AL_START_STOP = 1536, /** * Pause / Resume * */ AL_PAUSE_RESUME = 1537, /** * Select program * */ AL_SELECT_PROGRAM = 1538, /** * Delayed start time * */ AL_DELAYED_START_TIME = 1539, /** * Info status * */ AL_INFO_STATUS = 1540, /** * Info remote start enabled * */ AL_INFO_REMOTE_START_ENABLED = 1541, /** * Info program * */ AL_INFO_PROGRAM = 1542, /** * Info finish time * */ AL_INFO_FINISH_TIME = 1543, /** * Info delayed start * */ AL_INFO_DELAYED_START_TIME = 1544, /** * Info door * */ AL_INFO_DOOR = 1545, /** * Info door alarm * */ AL_INFO_DOOR_ALARM = 1546, /** * Switch supercool * */ AL_SWITCH_SUPERCOOL = 1547, /** * Switch superfreeze * */ AL_SWITCH_SUPERFREEZE = 1548, /** * Info switch supercool * */ AL_INFO_SWITCH_SUPERCOOL = 1549, /** * Info switch superfreeze * */ AL_INFO_SWITCH_SUPERFREEZE = 1550, /** * Measured Temperature * */ AL_CURRENT_TEMPERATURE_APPLIANCE_1 = 1551, /** * Measured Temperature * */ AL_CURRENT_TEMPERATURE_APPLIANCE_2 = 1552, /** * Set Value Temperature * */ AL_SETPOINT_TEMPERATURE_APPLIANCE_1 = 1553, /** * Set Value Temperature * */ AL_SETPOINT_TEMPERATURE_APPLIANCE_2 = 1554, /** * Change operation * */ AL_CHANGE_OPERATION = 1555, /** * Detailed status info * */ AL_INFO_VERBOSE_STATUS = 1556, /** * Info remaining time * Remaining time till status change (start, finish, etc.) */ AL_INFO_REMAINING_TIME = 1557, /** * Time of last status change (start, finish, etc.) * Time of last status change (start, finish, etc.) */ AL_INFO_STATUS_CHANGED_TIME = 1558, /** * Lock/Unlock door command * Lock/Unlock door command (1 Bit) */ AL_LOCK_UNLOCK_COMMAND = 1560, /** * Info Locked / Unlocked * Info Lock/Unlock door(1 Bit) */ AL_INFO_LOCK_UNLOCK_COMMAND = 1561, /** * Time * Current local time */ AL_TIME_OF_DAY = 61441, /** * Date * Curent local date */ AL_DATE = 61442, /** * Notification * Notification from message center */ AL_MESSAGE_CENTER_NOTIFICATION = 61443, /** * Switch entity On/Off * Entity control e.g. activate an alert or timer program */ AL_SWITCH_ENTITY_ON_OFF = 61697, /** * Info switch entity On/Off * Reflects the active state of an entity e.g. alert or timer program */ AL_INFO_SWITCH_ENTITY_ON_OFF = 61698, /** * Consistency Tag * Notifications of RF devices (e. g. Battery low) */ AL_CONSISTENCY_TAG = 61700, /** * Battery Status * Notifications of RF devices (e. g. Battery low) */ AL_BATTERY_STATUS = 61701, /** * Stay awake! * Notifications of RF devices (e. g. Battery low) */ AL_STAY_AWAKE = 61702, /** * Proxy switch * */ AL_PROXY_1_TO_6_BIT = 61703, /** * Proxy, 1 byte * */ AL_PROXY_1_BYTE = 61704, /** * Proxy, 2 byte * */ AL_PROXY_2_BYTE = 61705, /** * Proxy, 4 byte * */ AL_PROXY_4_BYTE = 61706, /** * Cyclic sleep time * Time of sleep cycles */ AL_CYCLIC_SLEEP_TIME = 61707, /** * Presence * SysAP presence */ AL_SYSAP_PRESENCE = 61708, /** * Measured temperature 1 * SysAP temperature */ AL_SYSAP_TEMPERATURE = 61709, /** * Standby Statistics * Statistics about standby usage for battery devices */ AL_STANDBY_STATISTICS = 61710, /** * Heartbeat delay * Time period between two heartbeats */ AL_HEARTBEAT_DELAY = 61711, /** * Info heartbeat delay * Time period between two heartbeats */ AL_INFO_HEARTBEAT_DELAY = 61712, /** * Measured temperature 1 * For debug purposes */ AL_MEASURED_TEMPERATURE_1 = 65281, /** * Measured temperature 2 * For debug purposes */ AL_MEASURED_TEMPERATURE_2 = 65282, /** * Measured temperature 3 * For debug purposes */ AL_MEASURED_TEMPERATURE_3 = 65283, /** * Measured temperature 4 * For debug purposes */ AL_MEASURED_TEMPERATURE_4 = 65284 } //# sourceMappingURL=PairingId.d.ts.map