# 插件配置目录 [English](config-catalog.md) | 中文 每个 `config:` 块均可由 `cordis.yml` 条目设置：针对每个可加载的 harness 包，原样列出其 `apply` 函数或服务构造函数接收的配置声明（包括 JSDoc），并附上所有引用类型——包内类型直接粘贴，其他类型则提供链接。粘贴的内容是插件声明的完整配置类型——运行时 schema 有意排除的字段是仅供运行时使用的 seam（其自身的 JSDoc 会如此说明），不能通过 `cordis.yml` 设置。这是以**部署**为轴的参考文档——插件作者所依据的连接方式请参阅各[子系统页面](subsystems/core.zh.md)中的生成 `cordis-surface` 区域，面向模型的工具 schema 请参阅[工具目录](tool-catalog.zh.md)，而 [subsystems/](subsystems/core.zh.md) 则记录了这些声明所引用的类型。 本文件的两种语言版本都由源代码（`scripts/gen-config-catalog.ts`）生成，并通过 `pnpm run verify-config-catalog`（`doc-sync` 的一部分）验证新鲜度——请勿手工编辑。声明块使用 `ts config-catalog` 围栏（doc-typecheck 会跳过它，因为单独引用导入项的声明无法独立编译）。生成器还会将运行时 schemastery schema 与粘贴的声明进行交叉核对——每个经 schema 验证的键（包括嵌套键）都必须能在声明的配置类型中找到——因此，粘贴内容无法隐藏加载器接受的字段。 每个包的条目用三个标识符标注：`inject` 列出插件注入的服务键，其 `cordis.yml` 树还必须加载这些服务的提供者；`refs` 列出声明引用、但未粘贴在此处的类型；`source` 链接到声明配置的源文件。范围限定为 harness 层级（`packages/`）；配置树还可能加载的 vendored cordis 插件（控制台日志记录器等）固定为上游源代码（参见 [vendoring policy](../vendor/README.md)），未收录于此目录。 ## `@deepseek-ai/dsh-acp` - `inject`: `agents` · `llm` · `sessionPersistence` · `sessions` - `refs`: `Stream` (`@agentclientprotocol/sdk`) - `source`: [`packages/acp/acp/src/index.ts:75`](../packages/acp/acp/src/index.ts) ```ts config-catalog /** Plugin config: the provider/model selection used for each ACP-created agent. */ export interface AcpConfig { /** Provider route for created agents. */ provider?: string /** Model name for created agents. */ model?: string /** Maximum summaries returned by one session/list page. */ sessionListPageSize?: number /** Runtime-only transport override; production uses stdio. */ stream?: Stream } ``` ## `@deepseek-ai/dsh-agent-default-model` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/core/agent-default-model/src/index.ts:24`](../packages/core/agent-default-model/src/index.ts) ```ts config-catalog /** Default model selection supplied by plugin configuration. */ export interface Config { /** Registered provider route. */ provider: Volatile /** Provider-owned model id. */ model: Volatile /** Adapter-owned reasoning effort; omission follows the provider default. */ reasoningEffort: Volatile } ``` ## `@deepseek-ai/dsh-agent-instructions` - `inject`: `sessionProjections` · `workingDirectory` - `source`: [`packages/context/agent-instructions/src/config.ts:18`](../packages/context/agent-instructions/src/config.ts) ```ts config-catalog /** User-facing workspace instruction loader configuration. */ export interface Config { /** Directory entries that identify the project root while walking upward from the current working directory. */ projectRootMarkers?: string[] /** UTF-8 byte cap for one rendered baseline or dynamic batch; non-positive or non-finite disables loading. */ maxBytes: number /** Maximum UTF-8 bytes read from one instruction file; larger files are ignored. */ maxSourceBytes?: number /** * Ordered same-directory project candidates; every existing file loads, with * per-directory trimmed-content duplicates collapsed to the earliest candidate. */ instructionFileCandidates?: string[] /** * Ordered same-directory local-overlay candidates loaded after the base files * under the same per-directory trimmed-content dedup; empty disables the overlay. */ localInstructionFileCandidates?: string[] } ``` ## `@deepseek-ai/dsh-agent-loop` - `inject`: `agents` · `sessions` · `llm` · `tools` · `systemPrompt` · `sessionProjections` - `refs`: [`AgentOptions`](subsystems/core.zh.md) · [`SessionId`](subsystems/core.zh.md) · `Volatile` (`@deepseek-ai/cosmokit`) - `source`: [`packages/core/agent-loop/src/index.ts:303`](../packages/core/agent-loop/src/index.ts) ```ts config-catalog /** Agent-loop plugin configuration. */ export interface Config { /** * Maximum parallel-safe calls in flight per agent step. `1` is serial; * omission defaults to {@link DEFAULT_MAX_PARALLEL_TOOL_CALLS}. */ maxParallelToolCalls: Volatile /** Agents created or resumed at plugin startup. */ agents: (AgentOptions & { /** Stable config label used in logs and as the fresh combined-id prefix. */ id: string /** Optional stable identity; remounts resume its materialized history, while first use creates it fresh. */ sessionId?: SessionId /** Optional workspace for a fresh session. */ cwd?: string /** Persisted session to resume instead of creating a fresh session. */ resumeSessionId?: SessionId })[] } ``` ## `@deepseek-ai/dsh-agent-preset` - `inject`: `agentPresets` - `refs`: [`PresetDefinition`](../packages/preset/agent-preset-registry/src/index.ts) - `source`: [`packages/preset/agent-preset/src/index.ts:9`](../packages/preset/agent-preset/src/index.ts) ```ts config-catalog /** Definition submitted to the preset registry. */ export type Config = PresetDefinition ``` ## `@deepseek-ai/dsh-agent-preset-registry` - `inject`: `loader` · `sessionProjections` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/preset/agent-preset-registry/src/preset.ts:13`](../packages/preset/agent-preset-registry/src/preset.ts) ```ts config-catalog /** Registry selection policy. */ export interface Config { /** Deployment default when the caller omits a preset. */ default: string /** User-selected default; edited through Settings. */ selectedDefault: Volatile } ``` ## `@deepseek-ai/dsh-agent-tool-presentation` - `inject`: `tools` - `refs`: [`ToolPresentationMode`](subsystems/tools.zh.md) - `source`: [`packages/core/agent-tool-presentation/src/index.ts:38`](../packages/core/agent-tool-presentation/src/index.ts) ```ts config-catalog /** Plugin config. */ export interface Config { /** * The form this agent's model sees. `native` sends every visible schema, * `ptc` sends only `run_code` plus a generated SDK. * Required rather than defaulted: the deployment default is what a preset * without this row already gets, so an omitted value would mean the row was * composed for nothing. */ mode: ToolPresentationMode } ``` ## `@deepseek-ai/dsh-api-gateway` - `inject`: `typert` - `source`: [`packages/api/gateway/src/index.ts:146`](../packages/api/gateway/src/index.ts) ```ts config-catalog /** Gateway transport configuration. */ export interface Config { /** WebSocket Ping interval from 1 through 2,147,483,647 milliseconds. @default 2000 */ readonly websocketHeartbeatIntervalMs?: number /** Buffered uplink frame bytes one logical stream may hold before it fails with `gateway/uplink-overflow`. @default 262144 */ readonly streamInboxBytes?: number } ``` ## `@deepseek-ai/dsh-api-job-controller` - `inject`: `jobs` · `typert` - `source`: [`packages/api/job-controller/src/index.ts:35`](../packages/api/job-controller/src/index.ts) ```ts config-catalog /** Job Controller deployment policy. */ export interface Config { /** Coalescing window after a registry commit before the next rows or output read, in milliseconds (default 100). */ readonly observeFlushMs?: number /** Soft byte budget per observation output frame (default 65536); one larger chunk ships whole. */ readonly observeMaxFrameBytes?: number } ``` ## `@deepseek-ai/dsh-api-session-controller` - `inject`: `agentDefaultModel` · `agents` · `attachments` · `fileUploads` · `fs` · `llm` · `sessions` · `sessionProjections` · `sessionQuery` · `typert` · `workspaceRegistry` - `source`: [`packages/api/session-controller/src/index.ts:80`](../packages/api/session-controller/src/index.ts) ```ts config-catalog /** Session Controller deployment policy. */ export interface Config { /** Override platform desktop-opener detection. */ readonly nativeOpen?: boolean /** Positive integral milliseconds of list work before yielding between complete rows. */ readonly listWorkSliceMs?: number } ``` ## `@deepseek-ai/dsh-api-settings-controller` - `source`: [`packages/api/settings-controller/src/index.ts:35`](../packages/api/settings-controller/src/index.ts) ```ts config-catalog /** Host integrations replaceable by direct unit tests. */ export interface SettingsControllerInternals { /** Host text-editor integration used to open the settings document. */ readonly openTextFile?: (path: string, signal: AbortSignal) => Promise } ``` ## `@deepseek-ai/dsh-api-terminal-controller` - `inject`: `subprocess` · `sandboxPolicy` · `workingDirectory` · `typert` - `source`: [`packages/api/terminal-controller/src/index.ts:27`](../packages/api/terminal-controller/src/index.ts) ```ts config-catalog /** Deployment limits and an optional shell profile. */ export interface Config { /** Explicit shell profile; omission uses the execution environment's default shell. */ readonly shell?: { /** Executable path or PATH name, verified by the subprocess provider. */ path: string /** User-visible profile name. */ name: string /** Arguments passed to the interactive shell. */ args: string[] } | undefined /** Executable names or paths checked for the new-terminal shell selector. */ readonly shellCandidates: string[] /** Maximum retained terminals and pending allocations per Session. */ readonly maxTerminals: number /** Maximum terminal width in columns. */ readonly maxCols: number /** Maximum terminal height in rows. */ readonly maxRows: number /** Screen history rows retained for reconnecting clients. */ readonly scrollback: number /** Maximum queued UTF-8 frame bytes per output follower before disconnection. */ readonly maxBufferedBytes: number /** Maximum UTF-8 bytes in one input request. */ readonly maxInputBytes: number /** Provider process-termination grace period in milliseconds. */ readonly disposeGraceMs: number /** Continuous confirmed idle time without window holds before reclamation; zero disables reclamation. */ readonly unattendedTimeoutMs: number /** Interval between unattended shell and process observations. */ readonly activityPollIntervalMs: number /** Delay before retrying failed owned terminal cleanup. */ readonly cleanupRetryMs: number } ``` ## `@deepseek-ai/dsh-api-workspace-controller` - `inject`: `typert` · `workspaceRegistry` - `source`: [`packages/api/workspace-controller/src/index.ts:33`](../packages/api/workspace-controller/src/index.ts) ```ts config-catalog /** First-use directory policy for the Host account. */ export interface Config { /** Override the system Documents directory with a fully qualified path. */ documentsDirectory?: string /** Maximum duration of the operating system's Documents lookup. */ documentsLookupTimeoutMs?: number } ``` ## `@deepseek-ai/dsh-api-workspace-files` - `inject`: `fs` · `sandboxPolicy` · `sessions` · `typert` - `source`: [`packages/api/workspace-files/src/index.ts:70`](../packages/api/workspace-files/src/index.ts) ```ts config-catalog /** Deployment caps on one page or one listing. */ export interface Config { /** * Inclusive byte cap on one page's text and on one byte window. * * A page above this fails; it is not shortened, because a silently cut page * reads as the whole page. A byte window asking for more is refused the same * way. The file itself has no size cap: a caller pages through it. */ readonly maxBytes: number /** Inclusive byte cap on a complete-file read; larger files are refused, never truncated. */ readonly maxFileBytes: number /** Default and largest page size in lines; a request asking for more is refused. */ readonly maxLines: number /** Cap on returned directory entries; the rest is dropped and reported cut. */ readonly maxEntries: number } ``` ## `@deepseek-ai/dsh-attachment-local` - `source`: [`packages/attachment/attachment-local/src/index.ts:61`](../packages/attachment/attachment-local/src/index.ts) ```ts config-catalog /** Local attachment backend configuration. */ export interface Config { /** Explicit harness home; omitted follows `DSH_HOME`, then `~/.dsh`. */ dshHome?: string /** Maximum encoded bytes accepted for one submitted image. Default: 20 MiB. */ maxImageBytes?: number /** Maximum image count accepted in one submitted message. Default: 20. */ maxImagesPerMessage?: number /** Maximum aggregate encoded image bytes accepted in one submitted message. Default: 200 MiB. */ maxMessageImageBytes?: number /** Maximum intrinsic width multiplied by height accepted for one submitted image. Default: 64,000,000. */ maxImagePixels?: number /** Maximum intrinsic width and maximum intrinsic height accepted for one submitted image. Default: 8192px. */ maxImageDimension?: number /** Total-pixel budget of the stored provider-independent normalized image. */ normalizedImageMaxPixels?: number /** Long-edge pixel cap of the stored provider-independent normalized image, applied after the total-pixel budget. */ normalizedImageMaxDimension?: number /** * Encoded-byte target of the stored provider-independent normalized image; * the smallest quality-ladder output is kept when no quality fits. */ normalizedImageMaxBytes?: number /** Maximum simultaneous normalization or request-image transformations in this service instance. */ imageCompressionConcurrency?: number } ``` ## `@deepseek-ai/dsh-bash-local` - `inject`: `subprocess` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/shell/bash-local/src/index.ts:41`](../packages/shell/bash-local/src/index.ts) ```ts config-catalog /** Validated plugin configuration with live command budgets. */ export interface Config { /** Default working directory for commands (default: process.cwd()). */ cwd: Volatile /** Default foreground timeout in milliseconds. */ timeoutMs: Volatile /** Upper bound for per-call timeout overrides. */ maxTimeoutMs: Volatile /** Per-stream in-memory output cap; overflow spills to a temp file. */ maxOutputBytes: Volatile /** Per-stream spill-file cap; larger streams retain only their in-memory tail. */ maxSpillBytes: Volatile /** Grace period for kill escalation and inherited pipes; at most `MAX_TIMER_DELAY_MS`. */ graceMs: Volatile } ``` ## `@deepseek-ai/dsh-bash-sandbox` - `inject`: `subprocess` · `sandbox` · `sandboxPolicy` - `refs`: [`LocalConfig`](#deepseek-aidsh-bash-local) - `source`: [`packages/shell/bash-sandbox/src/index.ts:36`](../packages/shell/bash-sandbox/src/index.ts) ```ts config-catalog /** * Plugin config: the local executor's knobs, verbatim. The sandbox policy — * the default mode and fallback `workspace-write` root — is NOT here: it lives * on `ctx.sandboxPolicy` (`@deepseek-ai/dsh-sandbox-policy`), which resolves * each calling session's mode and cwd for every enforcing capability. The runner * choice is likewise the `ctx.sandbox` provider's config, not this executor's. */ export type Config = LocalConfig ``` ## `@deepseek-ai/dsh-client-connection` - `inject`: `credentials` - `source`: [`packages/client/connection/src/index.ts:92`](../packages/client/connection/src/index.ts) ```ts config-catalog /** Browser authentication, request limits, and connection recovery configuration. */ export interface ConnectionConfig { /** Browser recovery timing, injected into each served page. */ recovery?: ConnectionRecoveryConfig /** * Authorities this deployment serves beyond loopback: exact `host:port`, or * port-less `host` matching any port. The fence accepts loopback and the * listener's own bind IP independently; other remote authorities require * an entry here. A non-canonical or non-bare authority fails plugin load. */ trustedHosts?: string[] /** Absolute browser-session lifetime in days. Default: 30. */ cookieMaxAgeDays?: number /** Maximum buffered JSON body for every `/api` request. Default: 300 MiB. */ maxRequestBodyBytes?: number } /** Timing for generation readiness and automatic reconnection. */ export interface ConnectionRecoveryConfig { /** First-retry delay cap in ms; actual delay is 50–100% of the cap. Default: 500. */ backoffBaseMs?: number /** Finite growth factor of at least 1 per failed attempt; 1 keeps a fixed cap. Default: 2. */ backoffFactor?: number /** Maximum retry delay cap in ms; retries continue at this cap. Default: 10000. */ backoffMaxMs?: number /** * Delay before reporting a slow handshake, without cancelling it. Default: 3000. * Omitted when readiness, failure, cancellation, or the hard deadline occurs first. */ generationReadyWarnMs?: number /** Deadline in ms for readiness, including physical connection setup. Default: 15000. */ generationReadyTimeoutMs?: number } ``` ## `@deepseek-ai/dsh-client-hmr` - `inject`: `clientModules` · `webServer` - `source`: [`packages/client/hmr/src/index.ts:30`](../packages/client/hmr/src/index.ts) ```ts config-catalog /** Plugin config, validated by the same-named schemastery schema. */ export interface Config { /** Bundle stat-poll interval in milliseconds (default 500, the build-side watcher's polling default). */ pollIntervalMs?: number } ``` ## `@deepseek-ai/dsh-client-product-analytics` - `inject`: `deepseekAccount` · `productTelemetry` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/client/product-analytics/src/index.ts:14`](../packages/client/product-analytics/src/index.ts) ```ts config-catalog /** Application-owned collection policy; no user settings surface. */ export interface Config { /** Live application collection policy; ordinary Web does not mount this service. */ enabled: Volatile /** Running Desktop release, absent when unavailable. */ appVersion?: string } ``` ## `@deepseek-ai/dsh-client-shortcuts` - `source`: [`packages/client/shortcuts/src/config.ts:5`](../packages/client/shortcuts/src/config.ts) ```ts config-catalog /** Fixed shortcut sequence settings. */ export interface Config { /** Maximum interval between independent Escape presses for stopping a reply, in milliseconds. */ stopSequenceMs: number } ``` ## `@deepseek-ai/dsh-client-ui-plugin-manager` - `source`: [`packages/client/ui-plugin-manager/src/index.ts:15`](../packages/client/ui-plugin-manager/src/index.ts) ```ts config-catalog /** Registry-probe deadline and process-local cache policy. */ export interface Config { /** Whether the dialog can compare the public npm registries. */ registryProbeEnabled: boolean /** Deadline for the parallel HTTPS probes, including response cleanup. */ registryProbeTimeoutMs: number /** Lifetime of a winning registry or unavailable result. */ registryProbeCacheTtlMs: number } ``` ## `@deepseek-ai/dsh-client-ui-settings-account` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/client/ui-settings-account/src/index.ts:9`](../packages/client/ui-settings-account/src/index.ts) ```ts config-catalog /** Public contact options and live device-local onboarding progress. */ export interface Config extends ContactConfig { /** Onboarding progress format version. */ version: Volatile<1> /** Last accepted onboarding page. */ step: Volatile /** Selected work scenario. */ purpose?: Volatile /** Selected transcript detail. */ process?: Volatile /** Completion reason, absent until completion. */ completion?: Volatile<'completed' | 'skipped' | 'api-key' | null | undefined> /** Selected usage detail. */ usage: Volatile<'compact' | 'detailed'> /** Selected developer-tool visibility. */ developerTools: Volatile } /** Questionnaire destination and bonus notice timings shared by Host and Client. */ export interface ContactConfig { /** HTTPS questionnaire URL; override for a test form. */ contactFormUrl: string /** Questionnaire source option; empty until Harness is supported by the form. */ contactSource: string /** First delay before retrying a failed bonus acknowledgement. */ bonusAckRetryDelayMs: number /** Ceiling for the acknowledgement retry backoff. */ bonusAckRetryMaxDelayMs: number } /** Persisted steps; a native top-up page leaves the durable step at credit. */ export type OnboardingStep = 'welcome' | 'credit' | 'purpose' | 'process' | 'done' /** Work scenarios offered by the desktop introduction. */ export type OnboardingPurpose = 'office' | 'development' | 'both' /** Work-detail mode applied to Chat when onboarding completes. */ export type OnboardingProcess = 'compact' | 'standard' | 'detailed' ``` ## `@deepseek-ai/dsh-client-ui-settings-models` - `source`: [`packages/client/ui-settings-models/src/onboarding-config.ts:6`](../packages/client/ui-settings-models/src/onboarding-config.ts) ```ts config-catalog /** Onboarding options after schema defaults are applied. */ export interface Config { /** Offer the browser API-key step when no native shell owns credential onboarding. */ credentialOnboarding: boolean } ``` ## `@deepseek-ai/dsh-client-ui-sidebar-documentpreview` - `source`: [`packages/client/ui-sidebar-documentpreview/src/config.ts:5`](../packages/client/ui-sidebar-documentpreview/src/config.ts) ```ts config-catalog /** Transient Office conversion reuse within one Client connection. */ export interface Config { /** Retained PDF limits; pending conversions share cancellation by reader lifetime. */ office: { /** Maximum retained completed PDFs. */ maxCachedEntries: number /** Maximum retained PDF bytes, counted by each binary buffer's byteLength. */ maxCachedBytes: number /** Maximum unsettled Host conversion RPCs, including cancellation teardown. */ maxPending: number /** Maximum readers including source and renderer metadata lookups. */ maxReaders: number } /** Browser spreadsheet parser and dense cell allocation limits. */ excel: { /** Maximum source file bytes. */ maxBytes: number /** Maximum combined rectangular cell area across worksheets. */ maxCells: number /** Maximum parser Worker lifetime in milliseconds. */ timeoutMs: number } } ``` ## `@deepseek-ai/dsh-client-ui-theme` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/client/ui-theme/src/index.ts:20`](../packages/client/ui-theme/src/index.ts) ```ts config-catalog /** Runtime preferences projected to the browser. */ export interface Config { /** Browser palette preference. */ preference: Volatile /** Browser font size in pixels. */ fontSize: Volatile /** Code-block font size in pixels. */ codeFontSize: Volatile /** Sidebar terminal font size in pixels. */ terminalFontSize: Volatile /** Interface and body text font list; `''` keeps the built-in stack. */ textFontFamily: Volatile /** Code font list; `''` keeps the built-in stack. */ codeFontFamily: Volatile /** Sidebar terminal font list; `''` keeps the built-in stack. */ terminalFontFamily: Volatile } /** Theme preference persisted by the product Appearance row. */ export type ThemePreference = typeof THEME_PREFERENCES[number] ``` ## `@deepseek-ai/dsh-compaction-basic` - `inject`: `llm` · `tokenMeter` · `sessions` - `source`: [`packages/compaction/compaction-basic/src/types.ts:40`](../packages/compaction/compaction-basic/src/types.ts) ```ts config-catalog /** Basic compaction configuration with an optional exact-target policy table. */ export interface BasicCompactionConfig extends CompactionPolicyConfig { /** Exact provider/model overrides; duplicate targets fail plugin load. */ modelPolicies?: ModelCompactPolicyConfig[] /** Enable automatic step-boundary pressure and overflow-recovery listeners. Defaults to `true`. */ auto?: boolean } /** Policy fields shared by the default policy and exact model overrides. */ export interface CompactionPolicyConfig { /** Window fraction for pressure; capped at context window minus reserved output and `headroomTokens`. Defaults to `0.8`. */ thresholdRatio?: number /** Additional pressure headroom beyond the routed output reservation. Non-negative integer; defaults to `65536`. */ headroomTokens?: number /** Recent context retained as a fraction of context window minus reserved output tokens. Defaults to `0.16`. */ retainRatio?: number /** Absolute recent-context budget; mutually exclusive with `retainRatio`. */ retainTokens?: number /** Summary provider; set together with `summarizationModel`, or inherit the conversation target. */ summarizationProvider?: string /** Summary model; set together with `summarizationProvider`, or inherit the conversation target. */ summarizationModel?: string /** Provider generation cap for summarization. Defaults to the resolved `headroomTokens`; an explicit cap must be positive. */ maxTokens?: number /** Extra attempts after the first compaction when pressure remains above threshold. Defaults to `1`. */ compactionRetries?: number /** Maximum retries after canonical context overflow; `0` disables recovery. Defaults to `1`. */ maxOverflowRetries?: number } /** Exact provider/model override merged over the default compaction policy. */ export interface ModelCompactPolicyConfig extends CompactionPolicyConfig { /** Registered provider route to match. */ provider: string /** Exact routed model id to match within `provider`. */ model: string } ``` ## `@deepseek-ai/dsh-compaction-tool-result-pruner` - `inject`: `tokenMeter` - `source`: [`packages/compaction/compaction-tool-result-pruner/src/types.ts:5`](../packages/compaction/compaction-tool-result-pruner/src/types.ts) ```ts config-catalog /** Character-budget policy for deterministic tool-result pruning. */ export interface ToolResultPruneConfig { /** Prune when total text exceeds this many Unicode code points. Defaults to `8192`. */ thresholdChars?: number /** Maximum leading Unicode code points retained. Defaults to `4096`. */ headChars?: number /** Maximum trailing Unicode code points retained. Defaults to `1024`. */ tailChars?: number } ``` ## `@deepseek-ai/dsh-cordis-host-runner` - `inject`: `tools` - `source`: [`packages/extensions/cordis-host-runner/src/index.ts:103`](../packages/extensions/cordis-host-runner/src/index.ts) ```ts config-catalog /** Runner configuration. */ export interface Config { /** Maximum synchronous VM evaluation time in milliseconds. */ vmTimeoutMs?: number /** Maximum wait for a valid Client inspect response in milliseconds. */ clientInspectTimeoutMs?: number } ``` ## `@deepseek-ai/dsh-credentials-local` - `source`: [`packages/credentials/credentials-local/src/index.ts:64`](../packages/credentials/credentials-local/src/index.ts) ```ts config-catalog /** Plugin config: file location and hot-reload behavior. */ export interface Config { /** Credentials document path; defaults to `.credentials.yaml` under the harness home. */ path?: string /** Harness home used when `path` is omitted; defaults to `$DSH_HOME` or `~/.dsh`. */ dshHome?: string /** Watch the document and hot-publish external edits; defaults to true. */ watch?: boolean /** Watcher write-settle window in milliseconds; defaults to 100. */ debounceMs?: number } ``` ## `@deepseek-ai/dsh-deepseek-account-platform` - `inject`: `credentials` · `authorization` - `source`: [`packages/credentials/deepseek-account-platform/src/index.ts:23`](../packages/credentials/deepseek-account-platform/src/index.ts) ```ts config-catalog /** Deployment-specific platform and request deadlines. */ export interface Config { /** Platform origin serving auth-api and browser pages. */ platformOrigin?: string /** Native desktop identity for Host API and embedded Platform requests; null identifies the client as web. */ desktopPlatform?: 'darwin' | 'win32' | null /** Optional frontend deployment selector for embedded Usage and Top-up pages. */ embeddedPageDist?: string /** Exact HTTP(S) origin allowed to receive account tokens for inference and files. */ inferenceOrigin?: string /** Allow HTTP only on loopback for the development Mock. */ allowLoopbackHttp?: boolean /** Map authorization and completion pages to platformOrigin for private development proxies. */ rewriteBrowserOrigin?: boolean /** Host-only headers sent exclusively to platformOrigin; account authorization cannot be overridden. */ requestHeaders?: Record /** Overrides for profile, balance and embedded Platform requests; Cookie pairs merge by name. Logout retains requestHeaders. */ accountRequestHeaders?: Record /** Deadline for each platform HTTP request. */ requestTimeoutMs?: number /** Deadline for recharge-wallet queries; timeout returns a failed balance outcome. */ balanceTimeoutMs?: number /** Additional logout attempts after the first request fails, at most five. */ logoutMaxRetries?: number /** Delay before the first logout retry; each later delay doubles. */ logoutRetryDelayMs?: number /** Upper bound for the entire local attempt, even if the server advertises a longer TTL. */ attemptTimeoutMs?: number } ``` ## `@deepseek-ai/dsh-experimental-agent-team` - `inject`: `agents` · `sessions` · `sessionPersistence` · `sessionProjections` · `subagents` - `source`: [`packages/experimental/agent-team/src/types.ts:153`](../packages/experimental/agent-team/src/types.ts) ```ts config-catalog /** Team-service deployment limits. */ export interface Config { /** Maximum immutable teammate names retained by one Team. */ readonly maxMembers?: number /** Maximum non-deleted tasks retained by one Team. */ readonly maxTasks?: number /** Maximum UTF-8 bytes in one complete sender-framed delivery. */ readonly maxMessageBytes?: number /** Maximum milliseconds for shared operation settlement and for each Team child drain. */ readonly disposalTimeoutMs?: number } ``` ## `@deepseek-ai/dsh-experimental-api-speech-to-text` - `inject`: `speechToText` · `typert` - `source`: [`packages/experimental/api-speech-to-text/src/index.ts:20`](../packages/experimental/api-speech-to-text/src/index.ts) ```ts config-catalog /** Limits applied before decoding or calling a provider. */ export interface Config { /** Maximum decoded WAV bytes per request. */ maxAudioBytes: number /** Maximum PCM recording duration in seconds. */ maxDurationSeconds: number } ``` ## `@deepseek-ai/dsh-experimental-browser-use-chrome-devtools-mcp` - `inject`: `browserUse` · `agents` · `tools` · `systemPrompt` · `workingDirectory` - `refs`: `BrowserMcpConfig` (`@deepseek-ai/dsh-experimental-browser-use-runtime/mcp`) - `source`: [`packages/experimental/browser-use-chrome-devtools-mcp/src/index.ts:15`](../packages/experimental/browser-use-chrome-devtools-mcp/src/index.ts) ```ts config-catalog /** Fixed Chromium launch or existing-browser attachment settings. */ export type Config = BrowserMcpConfig ``` ## `@deepseek-ai/dsh-experimental-browser-use-playwright-mcp` - `inject`: `browserUse` · `agents` · `tools` · `systemPrompt` · `workingDirectory` - `refs`: `BrowserMcpConfig` (`@deepseek-ai/dsh-experimental-browser-use-runtime/mcp`) - `source`: [`packages/experimental/browser-use-playwright-mcp/src/index.ts:16`](../packages/experimental/browser-use-playwright-mcp/src/index.ts) ```ts config-catalog /** Fixed Chromium launch or existing-browser attachment settings. */ export type Config = BrowserMcpConfig ``` ## `@deepseek-ai/dsh-experimental-browser-use-stagehand-native` - `inject`: `browserUse` · `agents` · `tools` · `systemPrompt` - `refs`: `ModelConfig` (`@browserbasehq/stagehand`) - `source`: [`packages/experimental/browser-use-stagehand-native/src/index.ts:28`](../packages/experimental/browser-use-stagehand-native/src/index.ts) ```ts config-catalog /** Profile-owned browser connection and independent Stagehand model credentials. */ export interface Config { /** Native Stagehand model and credentials; independent of the Session model. */ model: StagehandModelConfig /** Launch a fresh browser or attach to the configured existing endpoint. */ mode: 'launch' | 'attach' /** CDP HTTP or WebSocket endpoint, required only for attach mode. */ cdpEndpoint?: string /** Optional Stagehand extension id for an existing browser. */ extensionId?: string /** Installed Chrome/Chromium executable used in launch mode. */ executablePath?: string /** Hide an owned browser's window. */ headless?: boolean /** Deadline for Chromium startup and Stagehand navigation/action operations. */ operationTimeoutMs?: number /** Grace for native SDK cleanup before its connection Worker is terminated. */ shutdownGraceMs?: number } /** Profile-owned model settings accepted by the pinned Stagehand SDK. */ export interface StagehandModelConfig { /** Provider-prefixed model name from Stagehand's supported model catalog. */ modelName: ModelConfig['modelName'] /** Explicit API key sent to Stagehand's browser extension. */ apiKey: string /** Additional headers sent with the extension's model requests. */ headers?: Record } ``` ## `@deepseek-ai/dsh-experimental-claude-code-mods` - `inject`: `workingDirectory` - `source`: [`packages/experimental/claude-code-mods/src/index.ts:53`](../packages/experimental/claude-code-mods/src/index.ts) ```ts config-catalog /** Plugin config: the limits mod hooks run under. */ export interface Config { /** A hook's own running-time limit in milliseconds (Claude Code: 10 seconds). */ hookTimeoutMs?: number /** A `.catch` handler's running-time limit in milliseconds (Claude Code: 1 second). */ catchTimeoutMs?: number /** Default `$.process.run` and `$.http.fetch` timeout in milliseconds (Claude Code: 30 seconds). */ processTimeoutMs?: number /** Claude Code tool name → harness tool name entries added to the built-in alias table. */ toolAliases?: Record /** Columns the band above the prompt reports to `ui.render` as `bodyColumns` and `viewport.columns`. */ bandColumns?: number /** Rows the band reports as `maxRows`. */ bandRows?: number } ``` ## `@deepseek-ai/dsh-experimental-client-ui-cot-translation` - `inject`: `translator` · `typert` · `sessionController` - `refs`: [`TranslationProvider`](subsystems/translation.zh.md) · `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/experimental/client-ui-cot-translation/src/index.ts:14`](../packages/experimental/client-ui-cot-translation/src/index.ts) ```ts config-catalog /** Live preferences presented on the bundle's Plugins page. */ export interface Config { /** Explicit translation provider, defaulting to Bing. */ provider: Volatile /** Target language code; auto follows the browser UI locale. */ targetLanguage: Volatile } /** Translation choices; auto targets the active browser UI language. */ export interface CotTranslationPreferences { /** Explicit provider selection; requests never fall back to another provider. */ provider: TranslationProvider /** BCP 47 language code, or auto to follow the UI language. */ targetLanguage: string } ``` ## `@deepseek-ai/dsh-experimental-computer-use-cua-driver-mcp` - `inject`: `computerUse` · `tools` - `refs`: [`McpClient`](../packages/mcp/mcp-client/src/index.ts) - `source`: [`packages/experimental/computer-use-cua-driver-mcp/src/index.ts:20`](../packages/experimental/computer-use-cua-driver-mcp/src/index.ts) ```ts config-catalog /** Installed executable and MCP connection overrides. */ export interface Config { /** Executable path or PATH command; defaults to `cua-driver`. */ command: string /** Arguments passed without a shell; defaults to `['mcp']`. */ args: string[] /** Per-call timeout in milliseconds; omission uses the MCP client's default. */ toolCallTimeoutMs?: number /** Reconnection overrides; defaults to the MCP client's policy. */ reconnect: McpClient.ReconnectConfig } ``` ## `@deepseek-ai/dsh-experimental-inspector` - `inject`: `webServer` · `connection` - `source`: [`packages/experimental/inspector/src/index.ts:66`](../packages/experimental/inspector/src/index.ts) ```ts config-catalog /** Host plugin configuration. Fetch capture is enabled by default. */ export interface Config extends Omit { /** Browser origins allowed to open the Client ingest WebSocket. */ clientOrigins?: string[] } /** User-facing Host options; every memory and lifecycle bound is configurable. */ export interface InspectorOptions { /** Loopback address used by the Worker HTTP and WebSocket endpoint. */ readonly host?: '127.0.0.1' /** First port to bind; occupied ports advance until one is available. */ readonly port?: number /** Additional exact browser origins admitted to the Client ingest socket. */ readonly clientOrigins?: readonly string[] /** Whether to observe calls made through the current global fetch function. */ readonly captureFetch?: boolean /** Maximum request-body prefix retained for one fetch. */ readonly maxRequestBodyBytes?: number /** Maximum response-body prefix retained for one fetch. */ readonly maxResponseBodyBytes?: number /** Maximum raw bytes encoded into one body observation. */ readonly maxBodyChunkBytes?: number /** Maximum total request and response body bytes retained by the Worker. */ readonly maxJournalBytes?: number /** Maximum active and completed fetch requests retained by the Worker. */ readonly maxRetainedRequests?: number /** Maximum encoded bytes accepted in one source transport frame. */ readonly maxSourceFrameBytes?: number /** Maximum observation records accepted in one source batch. */ readonly maxSourceRecordsPerFrame?: number /** Maximum records waiting in one producer queue. */ readonly maxQueuedRecords?: number /** Maximum encoded bytes waiting in one producer queue. */ readonly maxQueuedBytes?: number /** Maximum time allowed for the Worker to become ready. */ readonly startupTimeoutMs?: number /** Grace period before a stopping Worker is terminated. */ readonly stopTimeoutMs?: number /** Initial upper bound for randomized Client reconnect delay. */ readonly clientReconnectBaseMs?: number /** Maximum upper bound for randomized Client reconnect delay. */ readonly clientReconnectMaxMs?: number /** Deadline for one Worker-to-Client Runtime or Sources request. */ readonly clientRuntimeTimeoutMs?: number /** Deadline for one non-CDP semantic query. */ readonly queryTimeoutMs?: number /** Maximum live object handles retained per Client Runtime session. */ readonly maxClientRuntimeObjects?: number /** Maximum descriptors returned by one Client property request. */ readonly maxClientRuntimeProperties?: number /** Maximum encoded bytes read for one Client script or source map. */ readonly maxClientSourceBytes?: number /** Maximum Context and Fiber nodes retained in one realm snapshot. */ readonly maxCordisNodes?: number /** Disconnected Cordis snapshots retained after their live realm closes. */ readonly maxDisconnectedCordisTrees?: number } ``` ## `@deepseek-ai/dsh-experimental-ptc-runtime-python` - `inject`: `sandbox` · `sandboxPolicy` - `source`: [`packages/experimental/ptc-runtime-python/src/index.ts:45`](../packages/experimental/ptc-runtime-python/src/index.ts) ```ts config-catalog /** Plugin config: every cap, changeable from `cordis.yml` (no hardcoded tunables). */ export interface Config { /** * RLIMIT_CPU in whole seconds (a positive integer — `setrlimit` in the child * rejects a float). The child sets the soft limit to `cpuSeconds` and the * hard limit to `cpuSeconds + 1`: the kernel delivers SIGXCPU at the soft * limit, which the host classifies as a `timeout`; the +1s hard limit is a * SIGKILL backstop for a program that traps SIGXCPU. Granularity is whole seconds. */ cpuSeconds?: number /** Wall-clock ceiling in milliseconds; backstops CPU time for programs awaiting a promise nobody resolves. */ maxWallMs?: number /** * RLIMIT_AS in mebibytes; caps address space so a runaway allocation fails * cleanly. Not applied on Darwin, where the dyld shared cache mapped into * every process at exec exceeds any practical cap and the kernel rejects * the call; `cpuSeconds` and `maxWallMs` still bound the run there. Bounds * `maxLogBytes`/`maxValueBytes` at load on EVERY platform (this static check * runs on Darwin too, where only the runtime `setrlimit` is skipped): each * budget times a worst-case Unicode expansion must fit this byte count minus a * fixed interpreter baseline, so a near-budget output cannot breach the address * space during the child's build-and-encode. */ addressSpaceMb?: number /** * Shared byte budget for captured log text (host-side ledger). Bounded at load * against `addressSpaceMb`: the child builds and encodes a near-budget entry * under RLIMIT_AS with several copies live at once, so this cap times the * worst-case Unicode expansion must fit the address space left after the * interpreter baseline (see `addressSpaceMb`) — a load-time rejection, not a * runtime clamp. Also bounded at load by the host's configured heap like * `maxValueBytes` (see its JSDoc): the effective frame cap minus the frame * envelope. */ maxLogBytes?: number /** * Byte cap for the completion value. Bounded at load against `addressSpaceMb` * the same way `maxLogBytes` is: the child builds and encodes a near-budget * value under RLIMIT_AS with several copies live at once, so this cap times the * worst-case Unicode expansion must fit the address space left after the * interpreter baseline. Both budgets are ALSO bounded at load by the host's * configured heap: the effective frame cap (the protocol cap, or a lower * heap-derived ceiling when the host heap cannot safely parse a near-cap * frame — see `hostFrameParseCeiling`) minus the frame envelope, so a budget * whose honest frame could OOM the host's own JSON.parse is rejected up * front. */ maxValueBytes?: number /** SIGTERM→SIGKILL grace period on kill, matching bash-local's default. */ graceMs?: number /** * Absolute path, relative path, or basename of a CPython 3.10+ interpreter. * Resolved and validated once at plugin load under a five-second force-kill * deadline; a basename searches `PATH`. */ pythonBin?: string } ``` ## `@deepseek-ai/dsh-experimental-speech-to-text` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/experimental/speech-to-text/src/index.ts:20`](../packages/experimental/speech-to-text/src/index.ts) ```ts config-catalog /** Live selection read before a transcription starts; `configure()` writes it through the profile. */ export interface Config { /** Registered provider selected when the caller omits an id. */ defaultProvider: Volatile /** Provider language hint selected when the caller omits one. */ language: Volatile } ``` ## `@deepseek-ai/dsh-experimental-speech-to-text-sensevoice` - `inject`: `speechToText` · `subprocess` - `source`: [`packages/experimental/speech-to-text-sensevoice/src/config.ts:6`](../packages/experimental/speech-to-text-sensevoice/src/config.ts) ```ts config-catalog /** Local runtime, inference, and retention settings. */ export interface Config { /** Unique registration id; consumers select this exact id. */ providerId: string /** Absolute directory for verified ONNX models. */ dataRoot: string /** Existing directory containing the selected ONNX model and tokens.txt; omission downloads verified files. */ modelDirectory?: string | undefined /** Existing Silero VAD ONNX file; omission downloads the verified model. */ vadModelPath?: string | undefined /** Weight precision; INT8 minimizes first-use download and model storage. */ precision: 'int8' | 'fp32' /** Explicit Hugging Face-compatible origin; bypasses automatic selection and public fallback. */ modelOrigin?: string | undefined /** Hugging Face-compatible origins compared before downloading each missing asset. */ modelOrigins: string[] /** Deadline for concurrent HEAD probes, including redirects to the actual asset. */ modelProbeTimeoutMs: number /** CPU intra-operation thread count. */ threads: number /** Maximum speech segment length passed to the recognizer. */ segmentSeconds: number /** Silero speech probability threshold. */ vadThreshold: number /** Minimum speech duration retained by VAD. */ minSpeechSeconds: number /** Silence separating two speech segments. */ minSilenceSeconds: number /** Recording audio restored ahead of the first VAD segment, which cold start reports late; zero disables it. */ vadOnsetPaddingSeconds: number /** Maximum decoded WAV bytes accepted by the private worker. */ maxAudioBytes: number /** Deadline for runtime preparation and cold model loading. */ prepareTimeoutMs: number /** Deadline for one inference after the worker is ready. */ inferenceTimeoutMs: number /** Idle period before stopping the worker; zero keeps it warm. */ idleTimeoutMs: number /** Maximum accepted running and waiting transcriptions. */ maxPending: number /** Managed process termination grace period. */ graceMs: number /** Maximum retained worker diagnostic bytes. */ maxLogBytes: number /** Maximum transcript response bytes. */ maxResponseBytes: number /** Minimum interval between intermediate download progress notifications. */ progressIntervalMs: number } ``` ## `@deepseek-ai/dsh-experimental-tool-agent-team` - `inject`: `agents` · `agentTeams` · `tools` · `systemPrompt` - `source`: [`packages/experimental/tool-agent-team/src/index.ts:17`](../packages/experimental/tool-agent-team/src/index.ts) ```ts config-catalog /** Tool routing configuration. */ export interface Config { /** Continuable-subagent provider used for fresh teammates. */ readonly freshProvider?: string /** Continuable-subagent provider used for completed-prefix fork teammates. */ readonly forkProvider?: string } ``` ## `@deepseek-ai/dsh-experimental-translator` - `source`: [`packages/experimental/translator/src/index.ts:25`](../packages/experimental/translator/src/index.ts) ```ts config-catalog /** Routing and bounds for anonymous requests and independent native model translation. */ export interface Config { /** Provider selected when a consumer omits it. */ provider: TranslationProvider /** Google-compatible anonymous translation endpoint. */ googleEndpoint: string /** Bing-compatible Microsoft Edge browser translation endpoint. */ bingEndpoint: string /** Deadline covering the request and complete response body, in milliseconds. */ timeoutMs: number /** Maximum UTF-16 code units per request; at least two to admit one supplementary-plane character. */ maxTextChars: number /** Maximum anonymous JSON-body bytes or paid assembled UTF-8 translation bytes. */ maxResponseBytes: number /** Deadline for native admission and complete translation output, in milliseconds. */ deepseekTimeoutMs: number /** Requested output-token cap for independent native Flash translation. */ deepseekMaxOutputTokens: number } /** Explicit anonymous endpoint or native paid model route. */ export type TranslationProvider = AnonymousTranslationProvider | PaidTranslationProvider /** Anonymous browser endpoint selected for one translation. */ export type AnonymousTranslationProvider = 'google' | 'bing' /** Explicit native DeepSeek credential route selected for paid translation. */ export type PaidTranslationProvider = 'deepseek-account' | 'deepseek-official' ``` ## `@deepseek-ai/dsh-experimental-worktree` - `inject`: `workingDirectory` · `fs` · `subprocess` · `sandbox` · `sandboxPolicy` - `source`: [`packages/experimental/worktree/src/index.ts:19`](../packages/experimental/worktree/src/index.ts) ```ts config-catalog /** Worktree location, generated names, executables, and subprocess resource limits. */ export interface Config { /** Relative checkout pool inside the source repository. */ directory?: string /** Prefix for automatically generated branch and checkout names. */ namePrefix?: string /** Git 2.45 or newer executable name or absolute execution-world path. */ gitCommand?: string /** Node executable used for sandboxed directory allocation. */ nodeCommand?: string /** Deadline in milliseconds for one command. */ timeoutMs?: number /** Subprocess termination grace in milliseconds. */ graceMs?: number /** Maximum captured bytes per subprocess output stream. */ maxOutputBytes?: number } ``` ## `@deepseek-ai/dsh-file-reference-local` - `inject`: `agents` · `workingDirectory` - `source`: [`packages/context/file-reference-local/src/index.ts:35`](../packages/context/file-reference-local/src/index.ts) ```ts config-catalog /** Local file-reference discovery configuration. */ export interface Config { /** Maximum ranked candidates returned for one query. */ maxResults?: number /** Maximum indexed files and directories per agent workspace. */ maxEntries?: number /** Directory basenames never traversed or offered. */ excludedDirectories?: string[] } ``` ## `@deepseek-ai/dsh-fs-local` - `source`: [`packages/fs/fs-local/src/index.ts:45`](../packages/fs/fs-local/src/index.ts) ```ts config-catalog /** Configuration for the local filesystem backend. */ export interface Config { /** Base directory for relative paths. Defaults to `process.cwd()`. */ cwd?: string /** * Exclusive UTF-8 byte limit on each overwrite-diff side, capped by the * runtime's safe allocation/decode maximum. Defaults to 10 MiB. */ diffBasisMaxBytes?: number } ``` ## `@deepseek-ai/dsh-fs-sandbox` - `inject`: `sandboxPolicy` - `refs`: [`LocalConfig`](#deepseek-aidsh-fs-local) - `source`: [`packages/fs/fs-sandbox/src/index.ts:45`](../packages/fs/fs-sandbox/src/index.ts) ```ts config-catalog /** * Plugin config: the local backend's knobs verbatim (`cwd` resolution default * and `diffBasisMaxBytes` overwrite-presentation bound). The sandbox default * (mode + `workspace-write` fallback root) is NOT here — `ctx.sandboxPolicy` * resolves each calling session for every enforcing capability. */ export type Config = LocalConfig ``` ## `@deepseek-ai/dsh-goal` - `inject`: `agents` · `sessionProjections` - `source`: [`packages/goal/goal/src/index.ts:172`](../packages/goal/goal/src/index.ts) ```ts config-catalog /** Deployment defaults for goal creation. */ export interface Config { /** Total rounds used when a create request omits its own cap. */ defaultMaxGoalRounds?: number } ``` ## `@deepseek-ai/dsh-headless` - `inject`: `agentDefaultModel` · `agents` · `sessions` - `source`: [`packages/bundle/headless/src/index.ts:43`](../packages/bundle/headless/src/index.ts) ```ts config-catalog /** Plugin config: the task and run options resolved from this app's injected provider service. */ export interface Config { /** The prompt text for the single run; absent when the task arrives on stdin. */ task?: string /** Exact Session identity to adopt; absent for a fresh random identity. An id with no stored Session fails. */ sessionId?: string /** Whether stdout carries the machine-readable event stream instead of final text. */ json?: boolean } ``` ## `@deepseek-ai/dsh-hmr` - `refs`: `ChokidarOptions` (`chokidar`) - `source`: [`packages/boot/hmr/src/index.ts:53`](../packages/boot/hmr/src/index.ts) ```ts config-catalog /** Module roots and watcher timing, with Chokidar deployment options. */ export interface HmrConfig extends ChokidarOptions { /** Directory resolved against the owning context's base URL. */ base?: string /** Module watch roots; an empty list leaves only explicit configuration watches. */ root: string[] /** Milliseconds for combining module changes. */ debounce: number /** Glob patterns excluded from module watching. */ ignored: string[] } ``` ## `@deepseek-ai/dsh-hooks-claude-code` - `inject`: `shell` · `sessionProjections` · `workingDirectory` - `source`: [`packages/experimental/hooks-claude-code/src/index.ts:51`](../packages/experimental/hooks-claude-code/src/index.ts) ```ts config-catalog /** Plugin config: where the CC hook config lives + substitution roots. */ export interface Config { /** * Path to a `hooks.json` or a settings file whose `hooks` key holds the config. * Process-level: read once at load, a relative path resolves against the process * launch cwd, so one config applies to the whole process. * TODO(per-session-hook-config): per-session discovery of a project-local * `hooks.json` from each `session/new.cwd`. */ configPath: string /** * Replaces `${CLAUDE_PLUGIN_ROOT}` in command strings (the plugin's root dir). */ pluginRoot?: string /** * Replaces `${CLAUDE_PROJECT_DIR}` in command strings AND is exported as the * `CLAUDE_PROJECT_DIR` env var for hook processes. When omitted, the env var * defaults per-run to the agent's current directory (the * same dir the hook runs in) — Claude Code always exports this var, and common * unmodified hooks reference `$CLAUDE_PROJECT_DIR` for project-relative paths. */ projectDir?: string /** Default per-hook timeout in ms when a hook sets none (CC default: 600000). */ defaultTimeoutMs?: number /** Character cap for the `hook/result` event's persisted stderr summary. */ stderrSummaryMaxChars?: number } ``` ## `@deepseek-ai/dsh-hooks-codex` - `inject`: `shell` · `sessionProjections` · `workingDirectory` - `source`: [`packages/experimental/hooks-codex/src/index.ts:50`](../packages/experimental/hooks-codex/src/index.ts) ```ts config-catalog /** Plugin config: where the Codex hooks.json lives + the model name for payloads. */ export interface Config { /** * Path to a Codex `hooks.json`. Process-level: read once at load, a relative * path resolves against the process launch cwd. * TODO(per-session-hook-config): per-session project-local discovery from each * `session/new.cwd`. */ configPath: string /** The model name stamped on every payload (Codex includes `model` on each event). */ model?: string /** Default per-hook timeout in ms when a hook sets none (Codex default: 600000). */ defaultTimeoutMs?: number /** Character cap for the `hook/result` event's persisted stderr summary. */ stderrSummaryMaxChars?: number } ``` ## `@deepseek-ai/dsh-host-directory-picker-browse` - `source`: [`packages/host/directory-picker-browse/src/index.ts:181`](../packages/host/directory-picker-browse/src/index.ts) ```ts config-catalog /** Validated plugin configuration. */ export interface Config { /** Complete-result bound of one listing level; see {@link BrowseDirectoryPicker.Config}. */ maxEntries: number } ``` ## `@deepseek-ai/dsh-host-frontend-static` - `inject`: `webServer` · `connection` - `source`: [`packages/host/frontend-static/src/index.ts:30`](../packages/host/frontend-static/src/index.ts) ```ts config-catalog /** Plugin config: the dist anchor. */ export interface Config { /** Absolute path of index.html inside the dist root. */ distIndex: string } ``` ## `@deepseek-ai/dsh-host-open-in-app` - `inject`: `webServer` · `connection` · `subprocess` - `source`: [`packages/host/open-in-app/src/index.ts:50`](../packages/host/open-in-app/src/index.ts) ```ts config-catalog /** Open-in-app host configuration. */ export interface Config { /** * Per-command deadline in milliseconds for catalog-resolution host * commands (`xcode-select`, the Windows registry reads). */ readonly probeTimeoutMs: number /** * Per-command deadline in milliseconds for icon-extraction host commands * (`plutil`/`sips` on macOS, the PowerShell extraction on Windows). */ readonly iconTimeoutMs: number /** * Early-failure watch window per launch, in milliseconds: a launcher still * running when the window closes counts as launched and keeps running, so * this bounds how long the open route holds a successful launch, not how * long an application may live. */ readonly launchWatchMs: number } ``` ## `@deepseek-ai/dsh-host-product-telemetry-otel` - `inject`: `otel` - `source`: [`packages/host/product-telemetry-otel/src/index.ts:18`](../packages/host/product-telemetry-otel/src/index.ts) ```ts config-catalog /** Collector routing, application identity, and bounded in-memory batch settings. */ export interface Config { /** Full HTTP(S) logs URL. */ endpoint: string /** Collector routing header. */ channel: string /** Resource service.name supplied by the application composition. */ serviceName: string /** Resource service.version supplied by the application composition. */ serviceVersion: string /** Omit to honor OTEL_EXPORTER_OTLP_LOGS_COMPRESSION / OTEL_EXPORTER_OTLP_COMPRESSION. */ compression?: 'none' | 'gzip' /** Maximum records per export; must not exceed maxQueueSize. */ maxExportBatchSize: number /** Maximum queued records; the SDK drops new records when full. */ maxQueueSize: number /** Delay before exporting a partial batch. */ scheduledDelayMillis: number /** Exporter HTTP deadline, including SDK transient-error retries. */ timeoutMillis: number /** Processor deadline for one batch export. */ exportTimeoutMillis: number /** Drain deadline; expiry cancels pending exports before disposal completes. */ shutdownTimeoutMillis: number } ``` ## `@deepseek-ai/dsh-host-webserver` - `source`: [`packages/host/webserver/src/index.ts:76`](../packages/host/webserver/src/index.ts) ```ts config-catalog /** Web server listen, TLS, and response-compression config. */ export interface Config { /** * Listen address: a concrete IPv4 or IPv6 literal of one local interface, * for example the container's own Pod address from `hostname -i`. A loopback * literal (any address in 127/8, `::1`, or a mapped form of either) keeps the * server on this machine; any other literal serves the network that address * belongs to, over plain HTTP unless `tls` is set. The unspecified address — * IPv4 any, IPv6 any, and the IPv4-mapped forms of IPv4 any — is rejected at * load: it would expose the port on every interface at once. */ host: string /** Listen port; zero requests an OS-assigned port. */ port: number /** * Serve HTTPS with this certificate and key instead of plain HTTP. Both files * are read once, before the listener binds: an unreadable or empty file, * invalid PEM, or a key that does not match the certificate rejects * initialization rather than falling back to HTTP. The material is never * re-read, so replacing a certificate takes a reload. Omitted or null listens * over plain HTTP. */ tls?: TlsConfig /** Response compression for socket-backed HTTP requests. @default 'none' */ compression?: 'none' | 'gzip' /** Gzip DEFLATE level from 0 through 9. @default 1 */ compressionLevel?: number /** Minimum known response length eligible for gzip; unknown-length streams are eligible. @default 1024 */ compressionThresholdBytes?: number } /** * TLS material for the HTTPS listener: one certificate chain file and the * private key file it pairs with. Both hold PEM text and both resolve against * the process working directory. */ export interface TlsConfig { /** Certificate chain file, leaf certificate first, PEM, no passphrase. */ certFile: string /** Private key file for the chain's leaf certificate; unencrypted PEM. */ keyFile: string } ``` ## `@deepseek-ai/dsh-jobs-local` - `source`: [`packages/jobs/jobs-local/src/index.ts:45`](../packages/jobs/jobs-local/src/index.ts) ```ts config-catalog /** Configuration for the process-local job registry. */ export interface Config { /** * Maximum `running` plus `stopping` jobs per exact owner or in the shared unowned bucket; * omission defaults to 10. */ maxConcurrentJobsPerOwner?: number /** Live ring retention per job in UTF-8 bytes; omission defaults to 262144. */ retainBytes?: number /** * Ring retention kept after a job settles, in UTF-8 bytes; omission defaults to 16384. * Settlement keeps every byte the model cursor has not consumed on top of * this cap; the first terminal model read then trims to it. */ settledRetainBytes?: number /** Poll interval for a job's pull sources, in milliseconds; omission defaults to 150. */ pumpPollMs?: number } ``` ## `@deepseek-ai/dsh-llm-deepseek-account` - `inject`: `llm` - `refs`: [`ProtocolConfig`](../packages/llm/llm-deepseek/src/index.ts) - `source`: [`packages/llm/llm-deepseek-account/src/config.ts:5`](../packages/llm/llm-deepseek-account/src/config.ts) ```ts config-catalog /** Account route configuration; authentication comes exclusively from the account service. */ export type Config = ProtocolConfig ``` ## `@deepseek-ai/dsh-llm-deepseek-api-key` - `inject`: `llm` - `refs`: [`ProtocolConfig`](../packages/llm/llm-deepseek/src/index.ts) · `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/llm/llm-deepseek-api-key/src/config.ts:10`](../packages/llm/llm-deepseek-api-key/src/config.ts) ```ts config-catalog /** Messages configuration with a per-request API-key reference. */ export interface Config extends ProtocolConfig { /** Credential reference resolved per request; defaults to DEEPSEEK_API_KEY. */ apiKeyEnv: Volatile } ``` ## `@deepseek-ai/dsh-llm-pi-ai` - `inject`: `llm` - `refs`: `Api` (`@earendil-works/pi-ai`) · `CacheRetention` (`@earendil-works/pi-ai`) · `Model` (`@earendil-works/pi-ai`) · `ModelThinkingLevel` (`@earendil-works/pi-ai`) · `OpenAICompletionsCompat` (`@earendil-works/pi-ai`) · [`RetryPolicyConfig`](../packages/llm/llm/src/index.ts) · `ThinkingBudgets` (`@earendil-works/pi-ai`) · `Transport` (`@earendil-works/pi-ai`) · `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/llm/llm-pi-ai/src/config.ts:222`](../packages/llm/llm-pi-ai/src/config.ts) ```ts config-catalog /** Plugin configuration: the provider routes this instance owns. */ export interface Config { /** * pi-ai provider routes, keyed by provider. An empty (or omitted) dict is * the dormant settings-driven posture: the adapter mounts with no routes * and registers them the moment a settings section supplies profiles. */ providers: Volatile> } /** Configuration for one pi-ai provider route; the `providers` dict key IS the route. */ export interface PiAiProviderProfile { /** Credential reference (environment-variable name) resolved per request through `ctx.credentials`. */ apiKeyEnv?: string /** Name shown by configuration surfaces; defaults to the route key. */ displayName?: string /** * Wire protocol every model on this route speaks. Omission keeps each * installed catalog model's own protocol, which is why a catalog route needs * no protocol at all; a route the catalog does not ship must name one. */ api?: string /** Endpoint for this route's models; defaults to the installed catalog's endpoint. */ baseURL?: string /** * This route's model catalog. Omission serves the installed catalog for the * route unchanged; an explicit list replaces it, each entry defaulting its * unset fields from the installed model of the same id. */ models?: PiAiModelProfile[] /** * Installed-catalog customizations by model id: each entry reshapes that * one model with the same fields a {@link models} entry takes, while the * rest of the catalog keeps serving untouched. Only meaningful on a catalog * route with no `models` list — `models` already replaces the catalog, so * an override beside it, on a route the catalog does not ship, or naming a * model the catalog does not describe is refused rather than skipped. */ modelOverrides?: Record /** * pi-ai wire-compatibility switches defaulting every model on this route * whose protocol declares them; each model's own `compat` overrides per * field. What neither sets keeps the installed catalog entry's value, then * pi-ai's own detection. A switch no model on the route could read is * refused rather than left looking applied. */ compat?: PiAiCompatProfile /** * Context capacity for a model this route lists that neither the entry nor * the installed catalog sizes (default 262,144). A guess by construction, so * a deployment whose gateway serves smaller models corrects it here. */ defaultContextWindow?: number /** * Output capability for a model this route lists that neither the entry nor * the installed catalog sizes (default 32,768). This sizes the model; it * never becomes a per-request cap on its own. */ defaultMaxTokens?: number /** * Request modalities for a model this route lists that neither its entry's * {@link PiAiModelProfile.input} nor the installed catalog declares (default * `[text]`). A fallback like the capacities above, not an override: a * catalog model keeps the modalities the catalog records for it, and this * value never narrows one. A gateway serving vision models the catalog does * not describe declares `[text, image]` once here instead of on every entry. * Unlike an entry's list, this one may not be empty — nothing sits below it * to answer instead. */ defaultInput?: PiAiModality[] /** Provider request headers, validated against Fetch when the profile resolves; Harness attribution wins reserved names. */ headers?: Record /** Provider-neutral pi-ai reasoning level. */ reasoning?: ModelThinkingLevel /** Token budgets used by reasoning providers that support them. */ thinkingBudgets?: ThinkingBudgets /** Prompt-cache retention preference. */ cacheRetention?: CacheRetention /** Streaming transport preference. */ transport?: Transport /** HTTP/provider SDK timeout in milliseconds. */ timeoutMs?: number /** WebSocket connection timeout in milliseconds. */ websocketConnectTimeoutMs?: number /** Maximum provider idle time while one stream read is outstanding. */ streamIdleTimeoutMs?: number /** * Maximum base64-encoded image payload per request. When a request's * accumulated images exceed it, the oldest images are replaced by text * placeholders until the request fits, so a long session keeps completing * requests instead of being rejected by a request-size cap. */ maxRequestImageBytes?: number /** Total-pixel budget for each deterministic inline request version. */ requestImagePixelBudget?: number /** * Raw encoded-byte target for each deterministic inline request version; * the smallest quality-ladder output is used when no quality fits. */ requestImageMaxBytes?: number /** Provider-owned model-request retry policy; omission uses normal mode with five retries. */ retryPolicy?: RetryPolicyConfig } /** One configured model entry: an id plus the catalog fields it overrides. */ export interface PiAiModelProfile { /** Model id sent to the provider and accepted by {@link GenerateOptions.model}. */ id: string /** Display name for selectors; defaults to the catalog name, then the id. */ name?: string /** Maximum combined request and response context in tokens. */ contextWindow?: number /** * Maximum output tokens. Configuring one also makes it this model's * per-request default; a value inherited from the installed catalog, or the * route's fallback, is the model's capability and never becomes a request * default on its own. */ maxTokens?: number /** * Request modalities this model accepts. Absent — or empty, which describes * a model that accepts nothing and so states no answer either — keeps the * installed catalog entry's modalities, then the route's `defaultInput`. * Declaring images is what makes a hand-declared vision model usable, and * declaring text alone corrects a catalog model whose gateway does not serve * what the catalog records. This is a claim about the endpoint, not a check * of it: nothing interrogates a gateway for what it accepts, so a model * claiming images its endpoint refuses is refused by the provider instead, * mid-turn. */ input?: PiAiModality[] /** * Selectable reasoning efforts. Absent inherits the installed catalog * entry's capability (a hand-declared model has none and does not reason); * `false` declares a non-reasoning model, which is how a profile strips * reasoning from a catalog model its gateway cannot serve; a non-empty dict * declares the offered levels and their wire spellings. */ reasoningEfforts?: false | PiAiReasoningEfforts /** pi-ai wire-compatibility switches for this model, winning over the route's per field; one its protocol does not declare is refused. */ compat?: PiAiCompatProfile } /** * Customization of one installed catalog model, keyed by its id in the * route's `modelOverrides` dict — the same fields a `models` entry may set, * with the id living in the key. Unlike a `models` list, overrides leave the * rest of the catalog serving untouched, which is what makes "correct one * model, keep the other thirty-seven" a three-line edit. */ export type PiAiModelOverride = Omit /** * pi-ai wire-compatibility switches, set on the route (its models' default) or * per model (winning over the route, field by field). * * pi-ai decides each of these from the provider id and baseURL when no layer * sets it, and a private gateway's URL says nothing: for an endpoint it does * not recognize the detection answers as though it were OpenAI itself, which * is wrong for most OpenAI-compatible gateways. So every field here is one a * deployment must be able to state because nothing can infer it, while the * fields pi-ai's catalog sets for a named vendor stay withheld. * * A field belongs to the protocols whose upstream compat type declares it: a * model-level switch its protocol does not take fails resolution, and a * route-level one skips past models it cannot fit. "The three Responses * protocols" below means `openai-responses`, `azure-openai-responses`, and * `openai-codex-responses`, which pi-ai gives one shared compat type, so a * switch settable on one is settable on all three. */ export interface PiAiCompatProfile { /** Whether the endpoint accepts `store`; `openai-completions`. */ supportsStore?: boolean /** * Whether the endpoint accepts the `developer` role for the system prompt, * which pi-ai sends only to a reasoning model; `false` keeps `system`. * `openai-completions` and the three Responses protocols. */ supportsDeveloperRole?: boolean /** Whether the endpoint accepts `reasoning_effort`; `openai-completions`. */ supportsReasoningEffort?: boolean /** Whether the endpoint accepts `stream_options: {include_usage: true}`; `openai-completions`. */ supportsUsageInStreaming?: boolean /** * Whether streams include `finish_reason`; `false` lets pi-ai infer the * terminal reason when the stream ends; `openai-completions`. */ supportsFinishReason?: boolean /** Which output-cap field the endpoint reads; `openai-completions`. */ maxTokensField?: NonNullable /** Whether tool results must carry `name`; `openai-completions`. */ requiresToolResultName?: boolean /** Whether a user message after tool results needs an assistant message between; `openai-completions`. */ requiresAssistantAfterToolResult?: boolean /** Whether thinking blocks must travel as text in `` delimiters; `openai-completions`. */ requiresThinkingAsText?: boolean /** Whether replayed assistant messages need an empty `reasoning_content` while reasoning is on; `openai-completions`. */ requiresReasoningContentOnAssistantMessages?: boolean /** Reasoning parameter format the endpoint expects; `openai-completions`. */ thinkingFormat?: PiAiThinkingFormat /** * Kwargs sent as `chat_template_kwargs`, which pi-ai reads only under the * two `chat-template` thinking formats; `openai-completions`. Nothing checks * that pairing: the format in force may come from the installed catalog * entry or from pi-ai's own baseURL detection, neither of which resolution * can read, so kwargs set beside another format are sent nowhere. */ chatTemplateKwargs?: NonNullable /** Arguments sent as `chat_template_args` under the `baseten` thinking format; `openai-completions`. */ chatTemplateArgs?: NonNullable /** Alias for `thinkingTokenBudgetField: "thinking_token_budget"`; an explicit field wins. `openai-completions`. */ supportsThinkingTokenBudget?: boolean /** Request field carrying the reasoning budget from `thinkingBudgets`; omitted unless configured. `openai-completions`. */ thinkingTokenBudgetField?: PiAiThinkingTokenBudgetField /** vLLM scheduler `priority`; lower runs earlier, and the server must enable priority scheduling. Omitted unless configured. */ vllmPriority?: number /** Whether `openai-responses` accepts `max_output_tokens`; `false` omits it. Azure and Codex ignore this shared compat field. */ supportsMaxOutputTokens?: boolean /** * Whether the endpoint accepts `strict` in tool definitions; * `openai-completions`, the three Responses protocols, `bedrock-converse-stream`. */ supportsStrictMode?: boolean /** Prompt-cache marker convention; `openai-completions`. */ cacheControlFormat?: NonNullable /** * Whether the endpoint accepts long prompt-cache retention; * `openai-completions`, the three Responses protocols, `anthropic-messages`. */ supportsLongCacheRetention?: boolean /** Whether the endpoint accepts per-tool `eager_input_streaming`; `anthropic-messages`. */ supportsEagerToolInputStreaming?: boolean /** Whether the endpoint accepts `cache_control` on tool definitions; `anthropic-messages`. */ supportsCacheControlOnTools?: boolean /** Whether the endpoint accepts the `temperature` request field; `anthropic-messages`. */ supportsTemperature?: boolean /** Whether to force adaptive thinking regardless of model id; `anthropic-messages`. */ forceAdaptiveThinking?: boolean /** Whether to replay an empty thinking signature instead of converting thinking to text; `anthropic-messages`. */ allowEmptySignature?: boolean /** Whether the endpoint accepts Anthropic strict tool schemas; `anthropic-messages`. */ supportsStrictTools?: boolean } /** One request modality a pi-ai model may accept. */ export type PiAiModality = Model['input'][number] /** * Selectable reasoning efforts for one model: each key is a level the model * offers (and selectors show), and its value is the wire spelling dispatch * sends for it. `off` alone may leave its value empty — "supported, send * nothing" — because for most providers not thinking is the parameter's * absence; every other declared level must name a wire value. A level absent * from the dict is not offered. */ export type PiAiReasoningEfforts = Partial> /** One reasoning-dispatch wire format a profile may name. */ export type PiAiThinkingFormat = NonNullable /** The reasoning-budget field spellings pi-ai accepts. */ export type PiAiThinkingTokenBudgetField = NonNullable ``` ## `@deepseek-ai/dsh-llm-replay` - `inject`: `llm` - `refs`: [`ModelModality`](../packages/llm/llm/src/index.ts) · [`RetryPolicyConfig`](../packages/llm/llm/src/index.ts) · [`SystemPromptUpdate`](../packages/llm/llm/src/index.ts) · [`ToolUpdate`](../packages/llm/llm/src/index.ts) - `source`: [`packages/test-support/llm-replay/src/index.ts:1129`](../packages/test-support/llm-replay/src/index.ts) ```ts config-catalog /** Plugin config: the {@link ReplayConfig} inputs, each defaulting to its `DSH_SNAPSHOT_*` env var in `apply`. */ export interface Config { /** Override the fixture path; defaults to `$DSH_SNAPSHOT_FILE`. */ file?: string /** Override the sidecar path; defaults to `$DSH_SNAPSHOT_OVERRIDE`. */ overrideFile?: string /** * Override the child-log paths; defaults to `$DSH_SNAPSHOT_CHILD_FILES` (a * path-separator-delimited list). Each is a recorded subagent session log for * a nested-agent scenario; absent/empty for a single-session scenario. */ childFiles?: string[] /** Optional replay-only provider catalog; absent or empty selects catch-all waterfall replay. */ providers?: ReplayProviderConfig[] /** Optional per-chunk pacing delay in ms (see {@link ReplayConfig.paceMs}); absent keeps burst yield. */ paceMs?: number } /** One provider route exposed by the replay adapter. */ export interface ReplayProviderConfig { /** Provider route used for replay requests. */ id: string /** Selector label; defaults to {@link id}. */ name?: string /** Advisory models exposed to replay scenarios that exercise discovery. */ models?: ReplayModelConfig[] /** Optional provider-owned retry policy used by assembled recovery snapshots. */ retryPolicy?: RetryPolicyConfig } /** One model exposed by a replay-only provider catalog. */ export interface ReplayModelConfig { /** Model id used for replay requests. */ id: string /** Selector label; defaults to {@link id}. */ name?: string /** Optional selector description. */ description?: string /** Optional positive integer context capacity published by the replay adapter. */ contextWindow?: number /** Optional declared input modalities, so a scenario can exercise capability gates (e.g. image-capable `read_image`). */ inputModalities?: readonly ModelModality[] /** * Optional per-request output cap the replay route materializes when callers * omit one, so replay reconstructs the request header a live catalog produced. */ defaultMaxTokens?: number /** * Optional flat visual-token price the replay route declares for every * retained request image, so keyless scenarios exercise route-priced * request pressure; each occurrence is priced at this value plus its * request-preview handle text. Requires {@link inputModalities} to include * `image` — a text-only route never sends visual tokens. Absent declares * no image pricing. */ imageRequestTokens?: number /** Optional reasoning-effort ids from least to greatest selectable effort. */ reasoningEfforts?: string[] /** * Optional effort materialized when callers omit one; must appear in * {@link reasoningEfforts} or call resolution rejects the route. */ defaultReasoningEffort?: string /** Optional in-history system prompt replacement for a keyless replay route. */ systemPromptUpdate?: SystemPromptUpdate /** Optional mid-conversation tool declaration mode for a keyless replay route. */ toolUpdate?: ToolUpdate } ``` ## `@deepseek-ai/dsh-llm-retry` - `inject`: `agents` · `sessionProjections` - `source`: [`packages/llm/llm-retry/src/index.ts:25`](../packages/llm/llm-retry/src/index.ts) ```ts config-catalog /** This policy executor has no config; providers own `retryPolicy`. */ export type Config = Readonly> ``` ## `@deepseek-ai/dsh-lsp-stdio` - `inject`: `fs` · `lsp` · `subprocess` - `source`: [`packages/lsp/lsp-stdio/src/index.ts:82`](../packages/lsp/lsp-stdio/src/index.ts) ```ts config-catalog /** Plugin configuration: provider id → local language-server configuration. */ export interface Config { /** Non-empty table of stable provider ids to independent local server configurations. */ servers: Record } /** One configured local language server and its host bounds. */ export interface LspLocalServerConfig { /** Executable to spawn (absolute, or resolved on PATH at load). */ command: string /** Lowercase leading-dot extension → LSP language id (e.g. `{ '.ts': 'typescript' }`). */ extensionToLanguage: Record /** Arguments passed to the executable (no shell). Default `[]`. */ args?: string[] /** Extra env vars merged on top of the scrubbed ambient env. Default `{}`. */ env?: Record /** Static `initialize` options forwarded to the server. Default `null`. */ initializationOptions?: unknown /** Static answer to every `workspace/configuration` item. Default `null`. */ configuration?: unknown /** Largest single framed message accepted from the server (bytes). Default 16000000. */ maxMessageBytes?: number /** Largest stderr tail retained for diagnostics (bytes). Default 1000000. */ maxStderrBytes?: number /** Largest source file this host will open (bytes). Default 4000000. */ maxDocumentBytes?: number /** Graceful `shutdown`/`exit` budget before escalation (ms). Default 5000. */ shutdownTimeoutMs?: number /** Request-cancel and SIGTERM→SIGKILL grace (ms). Default 2000. */ killGraceMs?: number } ``` ## `@deepseek-ai/dsh-mcp-client` - `inject`: `tools` - `source`: [`packages/mcp/mcp-client/src/index.ts:104`](../packages/mcp/mcp-client/src/index.ts) ```ts config-catalog /** Configuration for one stdio or Streamable HTTP MCP server. */ export type Config = StdioConfig | StreamableHttpConfig /** Config for connecting to an MCP server via a spawned child process over stdio. */ export interface StdioConfig { /** Selects child-process stdio transport. */ transport: 'stdio' /** * Stable local namespace for this server's model-facing tool names * (`mcp____`). Must match `[A-Za-z0-9_-]{1,32}` and be * unique across live mcp-client instances. */ serverName: string /** Executable used to start the server. */ command: string /** Arguments passed directly, without shell interpolation. */ args: string[] /** Extra env vars merged on top of scrubbed ambient env. */ env: Record /** Working directory for the child process. */ cwd: string /** Timeout per tool call or resource request in milliseconds. */ toolCallTimeoutMs: number /** Fail plugin activation when the initial connection or tool synchronization fails. */ failOnStartupError: boolean /** Maximum UTF-8 bytes of attributed server instructions (default 32768). */ maxInstructionBytes?: number /** Automatic reconnect policy after a lost connection; omission uses the defaults. */ reconnect?: ReconnectConfig } /** Config for connecting to an MCP server over Streamable HTTP (SSE). */ export interface StreamableHttpConfig { /** Selects Streamable HTTP transport. */ transport: 'streamable-http' /** * Stable local namespace for this server's model-facing tool names * (`mcp____`). Must match `[A-Za-z0-9_-]{1,32}` and be * unique across live mcp-client instances. */ serverName: string /** MCP endpoint URL. */ url: string /** Additional headers attached to MCP requests. */ headers: Record /** Timeout per tool call or resource request in milliseconds. */ toolCallTimeoutMs: number /** Fail plugin activation when the initial connection or tool synchronization fails. */ failOnStartupError: boolean /** Maximum UTF-8 bytes of attributed server instructions (default 32768). */ maxInstructionBytes?: number /** Automatic reconnect policy after a lost connection; omission uses the defaults. */ reconnect?: ReconnectConfig } /** Automatic reconnect policy for one MCP server connection. */ export interface ReconnectConfig { /** Reconnect automatically after a lost connection (default true). */ enabled?: boolean /** First reconnect delay in milliseconds; doubles per consecutive failed attempt (default 500). */ initialDelayMs?: number /** Backoff ceiling in milliseconds; also the uptime after which the attempt budget resets (default 30000). */ maxDelayMs?: number /** Consecutive failed attempts per outage before giving up for good (default 10). */ maxAttempts?: number } ``` ## `@deepseek-ai/dsh-message-feedback` - `inject`: `sessionPersistence` · `sessions` - `source`: [`packages/feedback/message-feedback/src/index.ts:40`](../packages/feedback/message-feedback/src/index.ts) ```ts config-catalog /** Required deployment policy for optional notes. */ export interface Config { /** Maximum UTF-8 byte length accepted for one note. */ readonly maxNoteBytes: number } ``` ## `@deepseek-ai/dsh-office-to-pdf` - `source`: [`packages/document/office-to-pdf/src/index.ts:31`](../packages/document/office-to-pdf/src/index.ts) ```ts config-catalog /** Provider concurrency and kit rendering/font configuration. */ export interface Config { /** Maximum simultaneous conversions; queued callers remain cancellable. */ maxConcurrentConversions: number /** Maximum metadata-only jobs awaiting source admission. */ maxQueuedJobs: number /** Maximum outstanding conversion readers. */ maxReaders: number /** Maximum reserved bytes across admitted source reads and conversions. */ maxSourceBytes: number /** Maximum concurrent background jobs; zero refuses speculative work. */ maxBackgroundConversions: number /** Maximum retained content-addressed PDFs. */ maxCachedEntries: number /** Maximum retained PDF bytes. */ maxCachedBytes: number /** Maximum retained source-version aliases to cached content. */ maxSourceEntries: number /** Conversion deadline in milliseconds; excludes the DSH queue. */ timeoutMs: number /** Maximum authorized source bytes. */ maxInputBytes: number /** Maximum complete PDF bytes. */ maxOutputBytes: number /** Exported raster-image DPI. */ maxImageResolution: number /** Maximum OOXML ZIP entries. */ maxArchiveEntries: number /** Maximum total declared uncompressed OOXML bytes. */ maxUncompressedBytes: number /** Absolute font roots; omission uses the kit's platform defaults. */ fontDirectories?: string[] /** Ordered font-family preference groups; omission retains the kit defaults. */ fontFallbacks?: string[][] /** Maximum physical font files indexed by each converter. */ maxFontFiles: number /** Maximum individual font-file bytes. */ maxFontFileBytes: number /** Maximum original font bytes loaded for a conversion. */ maxLoadedFontBytes: number } ``` ## `@deepseek-ai/dsh-permission-presets` - `inject`: `shell` · `approval` · `sessions` · `sessionProjections` - `refs`: [`ApprovalPolicy`](subsystems/approval.zh.md) · [`SandboxMode`](subsystems/sandbox.zh.md) · `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/interaction/permission-presets/src/index.ts:159`](../packages/interaction/permission-presets/src/index.ts) ```ts config-catalog /** The {@link PermissionPresetService} config: preset table and composition default. */ export interface Config { /** * The preset table: name → knob bundle. Defaults to `workspace-write` * (workspace-write + ask) and `danger-full-access` (danger-full-access + * never). The names `custom` and `auto` are reserved for derived state and * the Auto review integration respectively. */ presets: Record /** * Default for new sessions. When omitted, the preset matching the composed * sandbox and approval defaults is used. */ defaultPreset: Volatile } /** One preset's sandbox/approval bundle and optional client presentation. */ export interface PresetSpec { /** The `sandbox/mode` value the preset writes through. */ sandbox: SandboxMode /** The `approval/policy` value the preset writes through. */ approval: ApprovalPolicy /** The display label a client shows for this preset; the raw table key when omitted. */ name?: string /** One user-facing sentence on what the preset means; omitted when not configured. */ description?: string } ``` ## `@deepseek-ai/dsh-persona` - `inject`: `systemPrompt` - `source`: [`packages/preset/persona/src/index.ts:30`](../packages/preset/persona/src/index.ts) ```ts config-catalog /** Plugin config: the persona text this composition contributes. */ export interface Config { /** * Persona prose rendered as the `deployment:persona-prefix` section. A template: * complete `{{…}}` groups interpolate strictly against registered prompt * variables. Empty text drops the section at render, matching the registry. */ prefix: string /** * Persona suffix template rendered after first-party guidance. Omitted or empty * text shadows the deployment suffix away; interpolation is strict. */ suffix?: string /** Make the prefix the complete system prompt, suppressing the suffix and every other section. */ complete?: boolean /** Suppress dynamic runtime-context snapshots for this persona's agent scope. */ includeRuntimeContext?: boolean } ``` ## `@deepseek-ai/dsh-plan-mode` - `inject`: `tools` · `systemPrompt` · `sessionProjections` - `source`: [`packages/plan/plan-mode/src/index.ts:69`](../packages/plan/plan-mode/src/index.ts) ```ts config-catalog /** Deployment-owned plan guidance. */ export interface PlanModeConfig { /** Guidance rendered as the `plan:policy` prompt section while plan mode is active. */ section: string } ``` ## `@deepseek-ai/dsh-plugin-manager` - `inject`: `loader` · `profileContext` - `source`: [`packages/boot/plugin-manager/src/index.ts:42`](../packages/boot/plugin-manager/src/index.ts) ```ts config-catalog /** The pnpm executable, registries, and limits for diagnostics, lookups and connection checks. */ export interface Config { /** The pnpm executable name or path; resolved through `PATH` like the `dsh plugin` command. */ pnpmCommand?: string /** Maximum retained package-operation diagnostic bytes. */ outputBytes?: number /** Maximum time to wait for another process's profile package operation. */ lockWaitMs?: number /** Bound on one registry lookup an inspection runs, in milliseconds. */ inspectTimeoutMs?: number /** Maximum duration of the GitHub repository connection check before installation, in milliseconds. */ githubConnectionTimeoutMs?: number /** Maximum time one captured package run may print nothing before the manager terminates it, in milliseconds. */ idleTimeoutMs?: number /** The registry lookups and installations ask first, as an http(s) URL; absent, the one pnpm's own configuration names. */ registry?: string /** * Registries asked in turn, as http(s) URLs, while the one before is unreachable or holds no copy of the package. * A registry outside this set and `registry` is asked alone, and so is the one pnpm's own configuration names * unless that is npm's own registry or one of these. */ fallbackRegistries?: string[] } ``` ## `@deepseek-ai/dsh-plugin-package-inventory-deepseek` - `inject`: `agents` · `deepseekLlmApiExtensions` · `loader` - `source`: [`packages/llm/plugin-package-inventory-deepseek/src/index.ts:32`](../packages/llm/plugin-package-inventory-deepseek/src/index.ts) ```ts config-catalog /** Plugin-package request contribution configuration. */ export interface Config { /** Contribute `dsh_plugin_packages` to official DeepSeek requests. Defaults to `true`. */ enabled?: boolean } ``` ## `@deepseek-ai/dsh-ptc-runtime-node` - `inject`: `fs` · `subprocess` · `sandbox` · `sandboxPolicy` - `source`: [`packages/ptc-runtime/ptc-runtime-node/src/index.ts:27`](../packages/ptc-runtime/ptc-runtime-node/src/index.ts) ```ts config-catalog /** Deployment-varying runtime bounds and launch choices. */ export interface Config { /** Worker invocation in the subprocess world; omitted selects the local carrier. */ launch?: LaunchConfig /** Default elapsed deadline, including nested tool and approval waits. */ timeoutMs?: number /** Maximum numeric elapsed budget accepted by resolve. */ maxTimeoutMs?: number /** Combined serialized logs, completion and diagnostic byte cap. */ maxOutputBytes?: number /** V8 old-generation heap limit in MiB; native allocations are excluded. */ maxOldGenerationSizeMb?: number /** Maximum control frame, outstanding argument and queued control-output bytes. */ maxMessageBytes?: number /** Maximum simultaneous host binding calls accepted from a program. */ maxPendingCalls?: number /** Managed process termination and output-drain grace in milliseconds. */ graceMs?: number } /** Deployment-owned worker invocation in the subprocess execution world. */ export type LaunchConfig = { /** Start a separately installed Node executable and JavaScript bootstrap. */ kind: 'node-script' /** Executable name or path resolved by the subprocess provider. */ executable: string /** Absolute preinstalled bootstrap; omitted maps this package's bootstrap into the execution world. */ bootstrapPath?: string } | { /** Start the private PTC worker embedded in a packaged executable. */ kind: 'embedded' /** Packaged executable name or path resolved by the subprocess provider. */ executable: string } ``` ## `@deepseek-ai/dsh-pwsh-local` - `inject`: `subprocess` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/shell/pwsh-local/src/index.ts:58`](../packages/shell/pwsh-local/src/index.ts) ```ts config-catalog /** Validated plugin configuration with live command budgets. */ export interface Config { /** Default working directory for commands (default: process.cwd()). */ cwd: Volatile /** Default foreground timeout in milliseconds. */ timeoutMs: Volatile /** Upper bound for per-call timeout overrides. */ maxTimeoutMs: Volatile /** Per-stream in-memory output cap; overflow spills to a temp file. */ maxOutputBytes: Volatile /** Per-stream spill-file cap; larger streams retain only their in-memory tail. */ maxSpillBytes: Volatile /** Grace period for kill escalation and inherited pipes; at most `MAX_TIMER_DELAY_MS`. */ graceMs: Volatile /** * Explicit pwsh executable. When omitted, well-known Windows install * locations and PATH entries are probed in order (PowerShell 7 install, * PATH entries such as the Microsoft Store install, then Windows * PowerShell 5.1), falling back to a bare `pwsh` resolved through PATH. */ pwshPath: Volatile } ``` ## `@deepseek-ai/dsh-pwsh-sandbox` - `inject`: `subprocess` · `sandbox` · `sandboxPolicy` - `refs`: [`LocalConfig`](#deepseek-aidsh-pwsh-local) - `source`: [`packages/shell/pwsh-sandbox/src/index.ts:40`](../packages/shell/pwsh-sandbox/src/index.ts) ```ts config-catalog /** * Plugin config: the local executor's knobs, verbatim. The sandbox policy — * the default mode and fallback `workspace-write` root — is NOT here: it lives * on `ctx.sandboxPolicy` (`@deepseek-ai/dsh-sandbox-policy`), which resolves * each calling session's mode and cwd for every enforcing capability. The * runner choice is likewise the `ctx.sandbox` provider's config, not this * executor's. */ export type Config = LocalConfig ``` ## `@deepseek-ai/dsh-repeat-tool-reminder` - `source`: [`packages/guard/repeat-tool-reminder/src/index.ts:35`](../packages/guard/repeat-tool-reminder/src/index.ts) ```ts config-catalog /** * Plugin config, validated by the same-named schemastery schema plus the * load-time checks in `apply` (misconfiguration fails loud: an empty * `thresholds` list, a non-integer, a value below 2, or a duplicate throws at * plugin load, never a silent fall-back). `include`/`exclude` entries are * `*`-wildcard predicates over tool names at call time, not references to * registry entries — a pattern matching no currently registered tool is valid * (`exclude: [mcp_*]` must stay legal in a deployment that loads no MCP tools). */ export interface Config { /** Consecutive-repeat counts that trigger a reminder (default `[3, 5, 8]`). */ thresholds?: number[] /** Tool-name patterns to track; empty means every tool is tracked. */ include?: string[] /** Tool-name patterns transparent to the chain (neither count nor reset). */ exclude?: string[] /** * Maximum characters of canonical arguments quoted in the DETAILED reminder * (default 500). Large payloads (a `write` body, a long command) would * otherwise ride into the next request unbounded — precisely in a loop * scenario; the cap bounds the reminder, never the detection (the chain key * always compares the FULL canonical string). */ argumentsPreviewChars?: number } ``` ## `@deepseek-ai/dsh-sandbox-local` - `source`: [`packages/sandbox/sandbox-local/src/index.ts:45`](../packages/sandbox/sandbox-local/src/index.ts) ```ts config-catalog /** Plugin config. All optional — `static Config` supplies the defaults. */ export interface Config { /** * Override the runner argv; bwrap-compatible profile arguments are appended. A * non-empty override asserts full enforcement and skips built-in selection and * probing. A runner that starts but refuses its profile must be identifiable by * {@link runnerFailureSignatures}. Consumers classify a spawn rejection only after * confirming the workdir is usable. `ENOENT` or `EACCES` identifies the runner when * `error.path` equals argv[0] and `error.syscall` is `spawn` or `spawn `, or * when `error.path` is absent and `error.syscall` is exactly `spawn `. */ runnerCommand?: string[] /** * Case-insensitive stderr substrings emitted when a configured * {@link runnerCommand} refuses its profile before executing the wrapped * command. Required and non-empty with `runnerCommand`; rejected without * it. Each entry is a non-empty, single-line, case-insensitive substring * covering the executable runner's own failure dialect. */ runnerFailureSignatures?: string[] /** Positive timeout for each functional probe; zero would mean unbounded to Node. */ probeTimeoutMs?: number } ``` ## `@deepseek-ai/dsh-sandbox-policy` - `inject`: `sessionProjections` - `refs`: [`SandboxMode`](subsystems/sandbox.zh.md) - `source`: [`packages/sandbox/sandbox-policy/src/index.ts:71`](../packages/sandbox/sandbox-policy/src/index.ts) ```ts config-catalog /** * Plugin config: the deployment's sandbox default. All optional — `Config` * supplies the defaults (`mode: 'read-only'` is the fail-safe default; a * deployment that wants a workspace-writable agent opts in explicitly). The * runner choice is NOT here (it is the `ctx.sandbox` provider's config), nor * is any per-family knob: this is the one shared policy home. */ export interface Config { /** File-sandbox mode a session starts from (default: `read-only`). */ mode?: SandboxMode /** * Absolute fallback root for agentless calls and sessions without a cwd (default: * `process.cwd()`). Normal agent calls use their session cwd instead. */ workspaceRoot?: string } ``` ## `@deepseek-ai/dsh-schedule` - `inject`: `agents` · `sessions` · `storageDomain` · `sessionController` · `sessionPersistence` - `source`: [`packages/schedule/schedule/src/index.ts:72`](../packages/schedule/schedule/src/index.ts) ```ts config-catalog /** Configuration for the Host Schedule domain. */ export interface Config { /** * Delivery-history window retained per task, in days; omission defaults to 30. * Pruning happens when an acknowledgment is appended, and `lastDelivery` is always retained. */ deliveryHistoryDays?: number /** * Retained delivery records per task; omission defaults to 200. The older of this * cap and the window wins, and the newest records survive. */ deliveryHistoryRecords?: number } ``` ## `@deepseek-ai/dsh-sdk-app` - `inject`: `cmdlineArgs` - `source`: [`packages/bundle/sdk-app/src/index.ts:23`](../packages/bundle/sdk-app/src/index.ts) ```ts config-catalog /** SDK stdio startup configuration. */ export interface Config { /** Profile name rendered in help and diagnostics (default `sdk`). */ profile?: string } ``` ## `@deepseek-ai/dsh-sdk-jsonrpc-server` - `inject`: `agents` · `workingDirectory` - `refs`: `Readable` (`node:stream`) · `Writable` (`node:stream`) - `source`: [`packages/sdk/server/src/index.ts:24`](../packages/sdk/server/src/index.ts) ```ts config-catalog /** JSON-RPC deployment config plus runtime-only test hooks. */ export interface JsonRpcConfig { /** Report max-token turn/subagent termination as a successful SDK result. */ maxTokensAsSuccess?: boolean /** Transport input override; production uses `process.stdin`. */ input?: Readable /** Transport output override; production uses `process.stdout`. */ output?: Writable /** Process-exit override; production uses `process.exit`. */ exit?: (code: number) => void } ``` ## `@deepseek-ai/dsh-session-log-deepseek` - `inject`: `deepseekLlmApiExtensions` · `sessions` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/session/session-log-deepseek/src/index.ts:39`](../packages/session/session-log-deepseek/src/index.ts) ```ts config-catalog /** Session-log request contribution configuration. */ export interface Config { /** Contribute `dsh_session_log` to official DeepSeek requests. Defaults to `true`. */ enabled: Volatile /** * Largest serialized `dsh_session_log` field, in UTF-8 bytes, that one request carries. * A request uploads the longest pending event prefix that fits; later requests continue * after its acceptance. Defaults to 8 MiB. */ maxBytes: number } ``` ## `@deepseek-ai/dsh-session-log-export` - `inject`: `commands` · `connection` - `source`: [`packages/session-query/session-log-export/src/index.ts:46`](../packages/session-query/session-log-export/src/index.ts) ```ts config-catalog /** Session-log archive policy. */ export interface Config { /** DEFLATE level for each ZIP entry. @default 6 */ readonly compressionLevel?: SessionLogCompressionLevel } /** Valid fflate DEFLATE levels accepted by session-log export. */ export type SessionLogCompressionLevel = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 ``` ## `@deepseek-ai/dsh-session-persistence-jsonl` - `source`: [`packages/session/session-persistence-jsonl/src/index.ts:90`](../packages/session/session-persistence-jsonl/src/index.ts) ```ts config-catalog /** Plugin config for the JSONL backend's root and physical encoding. */ export interface Config { /** * Root directory for all session files. Required (no default): a default of * `process.cwd()` would scatter session files as the process's cwd changes * (bash calls, subprocesses). Sessions group under human-readable project * directories, then per-session directories. An existing root must be a * readable directory; an absent root is created on first materialization. */ root: string /** Physical encoding; defaults to checksummed Zstandard frames. */ compression?: JsonlCompression } /** Physical encoding selected for JSONL session artifacts. */ export type JsonlCompression = 'zstd' | 'none' ``` ## `@deepseek-ai/dsh-session-projection-cache` - `inject`: `storageDomain` · `sessionProjections` · `sessions` - `source`: [`packages/session/session-projection-cache/src/index.ts:75`](../packages/session/session-projection-cache/src/index.ts) ```ts config-catalog /** * Plugin config. Both throttle triggers are deployment choices with no * universally correct value, so the composition states them explicitly * (cordis.yml); the three mandatory write points (session creation, * `turn/end`, and session disposal) are policy, not tunables, and always * fire. */ export interface Config { /** Committed events per session that force a durable checkpoint write between mandatory points. */ writeEveryEvents: number /** Longest time (milliseconds) a dirty checkpoint may stay unwritten between mandatory points. */ writeIntervalMs: number } ``` ## `@deepseek-ai/dsh-session-query-sqlite` - `inject`: `sessions` - `refs`: [`SessionQueryConfig`](../packages/session-query/session-query/src/index.ts) - `source`: [`packages/session-query/session-query-sqlite/src/index.ts:92`](../packages/session-query/session-query-sqlite/src/index.ts) ```ts config-catalog /** Combined session-query configuration backed by SQLite full-text search. */ export interface Config extends SessionQueryConfig { /** * Dedicated derived-index path; `:memory:` is supported for ephemeral * indexes. Missing directories and database files are created owner-only on * POSIX filesystems; existing modes are preserved. */ path: string /** * Open the SQLite module and handle at service activation or the first * search, or `never` to disable full-text search: the inherited exact * reads, filters, and traces stay available, while `searchSessions` and * `searchEvents` fail with `SESSION_QUERY_SEARCH_DISABLED` and SQLite is * never imported or opened. Defaults to `startup`. */ openAt?: OpenAt /** SQLite journal mode. Defaults to `wal`. */ journalMode?: JournalMode /** Page size when a request omits `limit`. At most `Number.MAX_SAFE_INTEGER - 1`; defaults to 20. */ defaultLimit?: number /** Largest accepted page size. At most `Number.MAX_SAFE_INTEGER - 1`; defaults to 100. */ maxLimit?: number /** Maximum snippet length in Unicode code points. Defaults to 240. */ snippetChars?: number /** Maximum concurrent persisted-log reads in one inherited batch read. Defaults to 4. */ persistedReadConcurrency?: number /** Maximum cold prepared-Session observations the inherited reader retains for reuse. Defaults to 5. */ preparedSessionCacheSize?: number } /** SQLite module/handle opening phase; `never` disables full-text search entirely. */ export type OpenAt = 'startup' | 'first-search' | 'never' /** Supported SQLite journal modes. */ export type JournalMode = 'wal' | 'delete' | 'truncate' | 'persist' ``` ## `@deepseek-ai/dsh-session-reference` - `inject`: `sessionQuery` - `source`: [`packages/context/session-reference/src/config.ts:11`](../packages/context/session-reference/src/config.ts) ```ts config-catalog /** Session-reference service configuration. */ export interface Config { /** Maximum distinct source sessions referenced by one message, from one to three. */ maxReferences?: number /** Default host candidate-list limit. */ candidateLimit?: number /** Explicit maximum rendered UTF-8 bytes per source; absent uses the model-relative budget with a 64 KiB floor. */ maxReferenceBytes?: number /** Fraction of the model context window per source, estimated at four bytes per token; between zero and one. */ referenceContextFraction?: number } ``` ## `@deepseek-ai/dsh-session-telemetry-otel` - `inject`: `sessions` · `otel` - `refs`: [`LogExporterOptions`](../packages/telemetry/otel/src/index.ts) · [`SessionLogProcessorOptions`](../packages/telemetry/otel/src/index.ts) - `source`: [`packages/session/session-telemetry-otel/src/index.ts:85`](../packages/session/session-telemetry-otel/src/index.ts) ```ts config-catalog /** * Plugin configuration: sharing policy, SDK transport options, byte/count queue * settings, and an overall shutdown bound. Uploading modes validate their endpoint * and shutdown deadline at plugin load; `DISABLED` reads neither. */ export interface Config { /** Defaults to `FEEDBACK_ONLY`: capture session history only when feedback is explicitly submitted. */ mode?: SessionTelemetryMode /** * Explicit SDK HTTP transport settings, including optional routing headers. * Ambient credentials are not inherited. URL is required while uploading. * Exporter self-observability metering is not supported. */ exporter?: Omit & { /** Full logs endpoint (e.g. `https://collector.example.com/v1/logs`). Required outside `DISABLED`; validated at load. */ url?: string } /** * Count, queue, cadence, and per-request watchdog settings for the byte-bounded * processor. A watchdog warning never releases an unsettled transport slot. * SDK processor self-observability metering is not supported. */ processor?: SessionLogProcessorOptions /** Maximum time spent awaiting the SDK provider's complete shutdown path. */ shutdownTimeoutMillis?: number /** Uncompressed OTLP request byte limit, at most 4,000,000. */ maxRequestBytes?: number } /** Session-sharing policy selected by {@link Config.mode}. */ export enum SessionTelemetryMode { FEEDBACK_ONLY = 'FEEDBACK_ONLY', DISABLED = 'DISABLED', } ``` ## `@deepseek-ai/dsh-session-title` - `inject`: `sessions` · `sessionProjections` - `source`: [`packages/session/session-title/src/index.ts:56`](../packages/session/session-title/src/index.ts) ```ts config-catalog /** Required deterministic fallback and accepted-title limits. */ export interface Config { /** Maximum whitespace-delimited words in the built-in fallback. */ readonly fallbackMaxWords: number /** Maximum UTF-8 bytes in the built-in fallback. */ readonly fallbackMaxBytes: number /** Maximum UTF-8 bytes in any accepted title. */ readonly maxTitleBytes: number } ``` ## `@deepseek-ai/dsh-session-title-all-prompts-llm` - `inject`: `sessionTitle` · `llm` · `sessions` - `refs`: [`SessionTitleLlmConfig`](../packages/session/session-title-llm/src/index.ts) - `source`: [`packages/experimental/session-title-all-prompts-llm/src/index.ts:28`](../packages/experimental/session-title-all-prompts-llm/src/index.ts) ```ts config-catalog /** Required execution controls plus this provider's title-length targets; no defaults. */ export interface Config extends SessionTitleLlmConfig { /** Target word count for non-CJK titles. */ readonly targetWords: number /** Target character count for Chinese, Japanese, or Korean titles. */ readonly targetCjkCharacters: number } ``` ## `@deepseek-ai/dsh-session-title-first-prompt-llm` - `inject`: `sessionTitle` · `llm` · `sessions` - `refs`: [`SessionTitleLlmConfig`](../packages/session/session-title-llm/src/index.ts) - `source`: [`packages/session/session-title-first-prompt-llm/src/index.ts:28`](../packages/session/session-title-first-prompt-llm/src/index.ts) ```ts config-catalog /** Required execution controls plus this provider's title-length targets; no defaults. */ export interface Config extends SessionTitleLlmConfig { /** Target word count for non-CJK titles. */ readonly targetWords: number /** Target character count for Chinese, Japanese, or Korean titles. */ readonly targetCjkCharacters: number } ``` ## `@deepseek-ai/dsh-shell-env` - `source`: [`packages/shell/shell-env/src/index.ts:30`](../packages/shell/shell-env/src/index.ts) ```ts config-catalog /** Plugin config (all optional — the built-in facts resolve without defaults). */ export interface Config { /** DeepSeek Harness home directory exposed as `DSH_HOME`; defaults to `$DSH_HOME` or `~/.dsh`. */ dshHome?: string } ``` ## `@deepseek-ai/dsh-skill` - `source`: [`packages/skill/skill/src/index.ts:278`](../packages/skill/skill/src/index.ts) ```ts config-catalog /** Skill registry configuration. */ export interface Config { /** Maximum number of completed cwd/provider catalogs kept in memory. */ readonly collectCacheMaxEntries?: number } ``` ## `@deepseek-ai/dsh-skill-filesystem` - `inject`: `skills` - `source`: [`packages/skill/skill-filesystem/src/index.ts:48`](../packages/skill/skill-filesystem/src/index.ts) ```ts config-catalog /** Local filesystem skill provider configuration. */ export interface Config { /** Unique provider name. Defaults to `filesystem`. */ providerName?: string /** Whether project and user roots are included around custom roots. */ includeDefaultRoots?: boolean /** DeepSeek Harness config root. Defaults to `$DSH_HOME` or `~/.dsh`. */ dshHome?: string /** Shared agent config root. Defaults to `$DSH_AGENTS_HOME` or `~/.agents`. */ agentsHome?: string /** Additional skill roots scanned after project roots and before user roots. */ customSkillDirs?: string[] /** Whether host-local skill roots are watched for catalog changes. */ watch?: boolean /** Whether Chokidar uses polling instead of native filesystem events. */ watchUsePolling?: boolean /** Milliseconds a changed skill entry must remain stable before it is observed. */ watchStabilityThresholdMs?: number /** Milliseconds between Chokidar stability or polling probes. */ watchPollIntervalMs?: number /** Maximum distinct project roots whose skill directories remain watched. */ watchMaxProjects?: number /** Whether watched symbolic links follow their target files. */ watchFollowSymlinks?: boolean /** Bundled skill root; defaults to `$DSH_BUNDLED_SKILL_DIR` when default roots are included, otherwise mounts none. */ bundledSkillDir?: string } ``` ## `@deepseek-ai/dsh-skill-office` - `inject`: `skills` - `source`: [`packages/skill/skill-office/src/index.ts:16`](../packages/skill/skill-office/src/index.ts) ```ts config-catalog /** Office skill resource location. */ export interface Config { /** Absolute assets directory containing the three skill folders and shared scripts; defaults to packaged assets. */ assetRoot?: string /** Standalone Node executable; defaults to the current executable outside Electron and SEA. */ node?: string /** Absolute LibreOffice Kit CLI entry; false explicitly disables CLI access. */ cli?: string | false } ``` ## `@deepseek-ai/dsh-spill-local` - `source`: [`packages/spill/spill-local/src/index.ts:31`](../packages/spill/spill-local/src/index.ts) ```ts config-catalog /** Plugin config (all optional — `static Config` supplies the defaults). */ export interface Config { /** * Root directory for spill files. Omitted uses a lazily-created private * (0700) per-process directory under the OS temp dir — the safe default for * a local deployment. Set it to keep spill files under a known location. */ root?: string /** * Age in days after which a spill file is eligible for the one-shot startup * cleanup sweep. Defaults to `30`; `0` disables cleanup entirely. Files whose * `mtime` is strictly older than the cutoff are deleted and emptied * directories are pruned; fresh files, symlinks, and unrelated entries are * left untouched. On POSIX, cleanup skips roots and session directories that * another local user could modify or replace. Retention is deliberate — a * resumed or forked session may still reference an older locator until it * ages out. */ cleanupPeriodDays?: number } ``` ## `@deepseek-ai/dsh-spill-policy` - `inject`: `tools` - `source`: [`packages/spill/spill-policy/src/index.ts:25`](../packages/spill/spill-policy/src/index.ts) ```ts config-catalog /** Optional result-retention budget. */ export interface Config { /** Maximum estimated tokens in a retained result, including image descriptors and omission notices. Omitted disables retention. */ maxInlineTokens?: number } ``` ## `@deepseek-ai/dsh-ssh` - `source`: [`packages/ssh/ssh/src/index.ts:33`](../packages/ssh/ssh/src/index.ts) ```ts config-catalog /** Deployment-owned SSH identity and installed helper; no model argument selects these values. */ export interface Config { /** OpenSSH host alias, including its existing user, key and known-host configuration. */ host: string /** Explicit script or self-contained executable invocation. */ launch: HelperLaunch /** Absolute path to the installed, bundled helper entry. */ helper: string /** SHA-256 of that bundled helper; mismatches refuse the connection. */ helperHash: string /** Absolute remote default workspace. */ workspace: string /** Connection and administrative-request deadline, at most 2,147,483,647 milliseconds. */ requestTimeoutMs?: number /** Maximum JSON payload bytes per helper request or response. */ maxFrameBytes?: number /** Maximum ordinary requests; heartbeat and bounded resource cleanup have reserved capacity. */ maxPending?: number /** Remote helper lease; loss of heartbeats starts remote managed cleanup. */ leaseMs?: number } /** Installed helper invocation; script deployments may also install a PTC bootstrap. */ export type HelperLaunch = { /** Run the installed script with a separately installed Node executable. */ kind: 'node-script' /** Absolute remote Node executable. */ node: string /** Absolute remote PTC bootstrap; requires bootstrapHash. */ bootstrapPath?: string /** Lowercase SHA-256 of bootstrapPath; requires that path. */ bootstrapHash?: string } | { /** Run the helper executable with its embedded Node and PTC worker. */ kind: 'executable' } ``` ## `@deepseek-ai/dsh-storage-domain` - `inject`: `storage` - `source`: [`packages/storage/storage-domain/src/index.ts:52`](../packages/storage/storage-domain/src/index.ts) ```ts config-catalog /** * Plugin config. Which backend serves which domain is decided here, not * globally on the hub: `backend` is the default route and `routes` overrides * it per domain name. A route naming an unregistered backend fails loud at * `open` with `backend-not-found`. */ export interface Config { /** Default backend name for every domain without an explicit route. Required: there is no universally correct medium. */ backend: string /** Per-domain overrides: domain name → backend name. */ routes?: Record } ``` ## `@deepseek-ai/dsh-storage-json` - `inject`: `storage` - `source`: [`packages/storage/storage-json/src/index.ts:28`](../packages/storage/storage-json/src/index.ts) ```ts config-catalog /** * Plugin configuration. * `root` has NO default on purpose: a `process.cwd()` fallback would scatter * unit files wherever the process happens to start; assemblies state the * location explicitly. */ export interface Config { /** Directory holding one `.json` file (or `/` tree) per unit. */ root: string } ``` ## `@deepseek-ai/dsh-storage-sqlite` - `inject`: `storage` - `source`: [`packages/storage/storage-sqlite/src/index.ts:24`](../packages/storage/storage-sqlite/src/index.ts) ```ts config-catalog /** Plugin configuration. */ export interface Config { /** * Filesystem path to the SQLite database file. The special value `:memory:` * opens an in-process database (tests). On filesystems with POSIX modes, * missing directories and databases are created owner-only; existing path * modes are preserved. Filesystem setup errors other than an existing * database fail the open. The backend does not protect confidentiality or * integrity when another principal can replace the database entry in its * parent directory. */ path: string /** * SQLite `journal_mode` pragma. `wal` (the default) suits local disks; pick * a rollback-journal mode (`delete`/`truncate`/`persist`) on filesystems * where WAL's shared-memory files do not work (network mounts). See * {@link JournalMode}. */ journalMode?: JournalMode } /** * Journal modes the backend will run under. `wal` is the default; the * rollback-journal modes (`delete`/`truncate`/`persist`) exist for * filesystems where WAL's shared-memory files do not work (network mounts). * `memory`/`off` are excluded: dropping journal durability silently * contradicts the durability clause of the KV backend contract. */ export type JournalMode = 'wal' | 'delete' | 'truncate' | 'persist' ``` ## `@deepseek-ai/dsh-subagent` - `inject`: `workingDirectory` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/subagent/subagent/src/index.ts:184`](../packages/subagent/subagent/src/index.ts) ```ts config-catalog /** Host configuration for continuable subagent capacity. */ export interface Config { /** Maximum live children sharing uninterrupted continuable parent links; defaults to 8. */ maxActiveSubagents: Volatile /** Default delegation depth for tools without an explicit limit; defaults to 1. */ maxDepth: Volatile } ``` ## `@deepseek-ai/dsh-subagent-acp` - `inject`: `subagents` · `subprocess` - `source`: [`packages/subagent/subagent-acp/src/index.ts:25`](../packages/subagent/subagent-acp/src/index.ts) ```ts config-catalog /** Config: how to spawn and drive the child ACP agent process. */ export interface Config { /** Provider name on `ctx.subagents` (default `acp`). */ providerName: string /** The executable to spawn for each run (the child ACP agent). */ command: string /** Arguments passed to {@link command}. */ args: string[] /** * How to auto-answer the child's `session/request_permission` prompts: * `reject` (default — decline every prompt) or `allow` (approve via the first * `allow_once` or `allow_always` option). No prompt is surfaced to a human. */ permission: PermissionPolicy /** * Extra environment variables for the child process — e.g. the child * harness's own `DEEPSEEK_API_KEY`. Forwarded on top of a credential-scrubbed * copy of the parent env, so an explicit key here reaches the child while * ambient secrets do not leak implicitly. */ env: Record /** * Grace period (ms) for the child's EOF-driven quiesce on dispose — its * window to flush persistence and tear down its own nested subprocesses * before the parent escalates to a signal. Must not exceed * `MAX_TIMER_DELAY_MS`. */ disposeEofGraceMs?: number /** Failure-observation and termination-escalation grace (ms); must not exceed `MAX_TIMER_DELAY_MS`. */ disposeGraceMs?: number } /** Fixed response to child permission requests: reject by default, or select the first allow option. */ export type PermissionPolicy = 'allow' | 'reject' ``` ## `@deepseek-ai/dsh-subagent-claude-code` - `inject`: `subagents` · `subprocess` - `source`: [`packages/subagent/subagent-claude-code/src/index.ts:38`](../packages/subagent/subagent-claude-code/src/index.ts) ```ts config-catalog /** Deployment-owned model, permission, environment, and process-release settings. */ export interface Config { /** Provider name on `ctx.subagents` (default `claude-code`). */ providerName?: string /** Native Claude model fixed for this instance; omitted to inherit Claude settings. */ model?: string /** * Explicit environment entries layered over the subprocess seam's * credential-scrubbed parent environment. */ env?: Record /** * Native non-interactive mode fixed for this Provider instance. Defaults to * `dontAsk`; `acceptEdits` accepts edits, `auto` uses the native classifier, * `plan` returns a plan without approving execution, and * `bypassPermissions` explicitly skips permission checks. */ permissionMode?: ClaudeCodePermissionMode /** Grace in milliseconds between Claude Code managed-range termination tiers. */ disposeGraceMs?: number } /** Profile-selectable non-interactive Claude Code permission mode. */ export type ClaudeCodePermissionMode = typeof CLAUDE_CODE_PERMISSION_MODES[number] ``` ## `@deepseek-ai/dsh-subagent-codex` - `inject`: `subagents` · `subprocess` - `source`: [`packages/subagent/subagent-codex/src/index.ts:36`](../packages/subagent/subagent-codex/src/index.ts) ```ts config-catalog /** Deployment-owned model, permission, environment, and process-release settings. */ export interface Config { /** Provider name on `ctx.subagents` (default `codex`). */ providerName?: string /** Native Codex model fixed for this instance; omitted to inherit Codex settings. */ model?: string /** * Explicit environment entries layered over the subprocess seam's * credential-scrubbed parent environment. */ env?: Record /** Native non-interactive permission mode fixed for this Provider instance. */ permissionMode?: CodexPermissionMode /** Grace in milliseconds between app-server managed-range termination tiers. */ disposeGraceMs?: number } /** Profile-selectable non-interactive Codex permission mode. */ export type CodexPermissionMode = | 'never' | 'approve-for-me' | 'dangerously-bypass-approvals-and-sandbox' ``` ## `@deepseek-ai/dsh-subagent-dsh-sdk` - `inject`: `subagents` - `source`: [`packages/subagent/subagent-dsh-sdk/src/index.ts:34`](../packages/subagent/subagent-dsh-sdk/src/index.ts) ```ts config-catalog /** Config: how to spawn and drive the child SDK runtime process. */ export interface Config { /** Provider name on `ctx.subagents` (default `dsh-sdk`). */ providerName: string /** Explicit dsh CLI module, resolved and checked at plugin load; omission uses the SDK dependency. */ dshBin?: string /** Named child profile (default `sdk`). */ profile: string /** Ordered per-launch profile patch files, resolved and checked at plugin load. */ patches: string[] /** Absolute isolated Harness home for every nested child process. */ dshHome: string /** Provider route the child runtime initializes with (default `deepseek-official`). */ provider: string /** Model the child runtime initializes with (default `deepseek-v4-flash`). */ model: string /** Optional per-request output-token cap for the child runtime. */ maxTokens?: number /** * Extra environment variables for the child process — e.g. the child * runtime's own `DEEPSEEK_API_KEY`. Forwarded on top of a credential-scrubbed copy of the parent * env, so an explicit key here reaches the child while ambient secrets do * not leak implicitly. */ env: Record /** Bound (ms) on the protocol `shutdown` exchange during dispose. */ shutdownTimeoutMs?: number /** * Grace period (ms) for the child's EOF-driven quiesce on dispose — its * window to flush persistence and tear down its own nested subprocesses * before the parent escalates to a signal. */ disposeEofGraceMs?: number /** Termination confirmation window (ms), including forced exit on every platform. */ disposeGraceMs?: number } ``` ## `@deepseek-ai/dsh-subagent-fork-in-process` - `inject`: `subagents` - `source`: [`packages/subagent/subagent-fork-in-process/src/index.ts:29`](../packages/subagent/subagent-fork-in-process/src/index.ts) ```ts config-catalog /** Config: the registry name to register the provider under. */ export interface Config { /** Provider name on `ctx.subagents` (default `fork`). */ providerName: string } ``` ## `@deepseek-ai/dsh-subagent-spawn-in-process` - `inject`: `subagents` - `source`: [`packages/subagent/subagent-spawn-in-process/src/index.ts:23`](../packages/subagent/subagent-spawn-in-process/src/index.ts) ```ts config-catalog /** Config: the registry name to register the provider under. */ export interface Config { /** Provider name on `ctx.subagents` (default `spawn`). */ providerName: string } ``` ## `@deepseek-ai/dsh-system-prompt` - `source`: [`packages/core/system-prompt/src/index.ts:254`](../packages/core/system-prompt/src/index.ts) ```ts config-catalog /** Plugin config: the deployment-authored fragment of the system prompt (see {@link Config.personaPrefix} for its contract). */ export interface Config { /** Include the fixed DeepSeek Harness identity before the deployment persona (default true). */ includeHarnessIdentity?: boolean /** Include optional runtime-context snapshots in model history (default true); required context remains. */ includeRuntimeContext?: boolean /** * Deployment-wide persona prefix template before first-party guidance. A scoped section named * `deployment:persona-prefix` shadows it; `{{variable}}` references are strict. */ personaPrefix?: string /** * Persona suffix template after first-party guidance. A scoped `deployment:persona-suffix` * section shadows it; `{{variable}}` references are strict. Defaults to empty. */ personaSuffix?: string /** * Model-facing tool names in order, with {@link TOOL_ORDER_REST} exactly once. * Invalid fields fail at load and unknown names fail at assembly; known names * hidden in one scope may be absent there. Omitted means lexicographic order. */ toolOrder?: string[] } ``` ## `@deepseek-ai/dsh-terminal-bash` - `inject`: `terminals` · `sandboxPolicy` · `sessionProjections` · `subprocess` · `workingDirectory` - `source`: [`packages/terminal/terminal-bash/src/config.ts:10`](../packages/terminal/terminal-bash/src/config.ts) ```ts config-catalog /** Public plugin configuration. */ export interface Config { /** Backend registry type (default: `shell`). */ backendType?: string /** Interactive shell dialect (default: `bash`); selects the argv/env/startup defaults. */ shellDialect?: ShellDialect /** Interactive shell executable (default per dialect: `/bin/bash`, or the resolved pwsh). */ shellPath?: string /** Shell arguments (default per dialect: bash `--noprofile --norc -i`, pwsh `-NoLogo -NoProfile`). */ shellArgs?: string[] /** Terminal rows. */ rows?: number /** Terminal columns. */ cols?: number /** Maximum retained logical lines. */ scrollbackLines?: number /** Maximum retained UTF-8 bytes. */ scrollbackMaxBytes?: number /** Maximum bytes returned by one read or settled viewport. */ maxReadBytes?: number /** Readiness polling interval. */ pollIntervalMs?: number /** Delay before Linux exact syscall probes. */ exactProbeAfterMs?: number /** Silence duration that yields `inferred_idle`. */ idleSilenceMs?: number /** * Extra wait beyond `idleSilenceMs`, once a prompt marker was seen, for the shell to * regain the foreground before `inferred_idle` settles; at least one `pollIntervalMs`. */ handoffGraceMs?: number /** * Extra wait beyond `idleSilenceMs` and `handoffGraceMs`, once a prompt marker was seen but * its printable tail has not arrived, before `inferred_idle` settles. The marker is written * by the shell's own prompt function and the tail by the same render, so a missing tail is a * delivery delay on a contended host rather than an absent prompt. Zero keeps the bound at * `idleSilenceMs + handoffGraceMs`; any other value covers at least one `pollIntervalMs`, so a * nonzero tolerance always contains a readiness poll. */ promptTailGraceMs?: number /** Absolute bound for one send and the complete pwsh startup sequence. */ timeoutMs?: number /** Grace before teardown escalates to `SIGKILL`. */ disposeGraceMs?: number } /** One supported interactive shell dialect. */ export type ShellDialect = 'bash' | 'pwsh' ``` ## `@deepseek-ai/dsh-time-context` - `inject`: `agents` · `sessionProjections` - `source`: [`packages/context/time-context/src/index.ts:56`](../packages/context/time-context/src/index.ts) ```ts config-catalog /** Request-preparation clock formatting and append scheduling. Invalid values fail plugin load. */ export interface Config { /** Fallback display zone when the open turn has no unique browser zone. Omit to use the process zone. */ timeZone?: string /** Minimum milliseconds between durable injections in one session. Defaults to 600000 (10 minutes); 0 injects at every eligible step. */ refreshIntervalMs?: number } ``` ## `@deepseek-ai/dsh-tmux-context` - `inject`: `agents` · `sessionProjections` - `source`: [`packages/context/tmux-context/src/index.ts:47`](../packages/context/tmux-context/src/index.ts) ```ts config-catalog /** Per-turn tmux-location scheduling. Invalid values fail plugin load. */ export interface Config { /** Minimum milliseconds between durable injections in one session. Omit or set to 0 to inject on every eligible change. */ refreshIntervalMs?: number } ``` ## `@deepseek-ai/dsh-token-meter` - `inject`: `sessionProjections` - `source`: [`packages/llm/token-meter/src/types.ts:13`](../packages/llm/token-meter/src/types.ts) ```ts config-catalog /** Token-meter plugin configuration; the fixed estimator has no settings. */ export type TokenMeterConfig = Record ``` ## `@deepseek-ai/dsh-tool-ask-user` - `inject`: `tools` · `userQuestions` - `source`: [`packages/interaction/tool-ask-user/src/index.ts:16`](../packages/interaction/tool-ask-user/src/index.ts) ```ts config-catalog /** Cordis row selecting the tool schema and its default foreground wait. */ export interface Config { /** Tool definition selected by this Cordis row. Defaults to the blocking legacy tool. */ mode?: 'legacy' | 'timed' /** Foreground wait before automatic continuation. Defaults to 120 seconds. */ timeout?: number } ``` ## `@deepseek-ai/dsh-tool-bash` - `inject`: `tools` · `shell` · `systemPrompt` · `shellEnv` · `workingDirectory` - `source`: [`packages/shell/tool-bash/src/index.ts:37`](../packages/shell/tool-bash/src/index.ts) ```ts config-catalog /** Configuration for the bash tool. */ export interface Config { /** * Expose `run_in_background` while a job registry is composed (default * true); disabled calls are also rejected. Without a registry the tool is * foreground-only regardless. */ enableRunInBackground?: boolean /** * Keep a foreground command that reaches its timeout running as a * background job instead of killing it (default true). Applies only while * background execution is available: with `enableRunInBackground` false or * no job registry, the executor's deadline kills the command. A foreground * command the registry refuses at its start (admission or a missing * controller) also runs under the deadline kill. */ promoteOnTimeout?: boolean } ``` ## `@deepseek-ai/dsh-tool-bash-persistent` - `inject`: `tools` · `terminals` · `workingDirectory` - `source`: [`packages/shell/tool-bash-persistent/src/index.ts:445`](../packages/shell/tool-bash-persistent/src/index.ts) ```ts config-catalog /** Configuration for the persistent Bash tool. */ export interface Config { /** PTY backend used for each owner-isolated persistent shell (default `shell`). */ backendType?: string /** Wall-clock limit for one command (default 300000). */ timeoutMs?: number /** Maximum returned command-output characters before clipping (default 16000). */ maxOutputChars?: number /** Model-facing tool description; deployments may describe their environment. */ description?: string } ``` ## `@deepseek-ai/dsh-tool-fs` - `inject`: `tools` · `fs` · `systemPrompt` · `workingDirectory` - `source`: [`packages/fs/tool-fs/src/index.ts:26`](../packages/fs/tool-fs/src/index.ts) ```ts config-catalog /** Plugin config (all optional — `Config` supplies the defaults). */ export interface Config { /** Default and maximum number of lines returned by one `read` call. */ readLimit?: number /** Maximum characters returned for a single line before truncation. */ readMaxLineLength?: number /** Maximum bytes returned for the selected lines of one `read` call. */ readMaxBytes?: number /** Files at or above this size stream instead of loading whole into memory. */ readStreamMinSize?: number } ``` ## `@deepseek-ai/dsh-tool-fs-search` - `inject`: `tools` · `systemPrompt` · `subprocess` · `workingDirectory` - `source`: [`packages/fs/tool-fs-search/src/index.ts:74`](../packages/fs/tool-fs-search/src/index.ts) ```ts config-catalog /** Plugin config; over-cap glob sampling is an explicit deployment choice and the remaining fields have defaults. */ export interface Config { /** Whether an over-cap `glob` page is sampled across top-level entries instead of taking the modification-time head. */ sampleOverCapGlobResults: boolean /** Max paths one `glob` call retains inline; later paths go to the formatted spill file. */ globMaxResults?: number /** Max flat matches one `grep` call retains inline; later matches go to the formatted spill file. */ grepMaxMatches?: number /** Max bytes retained for one matched-line preview (the cut preserves UTF-8 boundaries). */ grepMaxLineBytes?: number /** Max bytes of one search's serialized `presentationMeta`; trailing groups/paths drop past it so the persisted card stays bounded. */ searchMetaMaxBytes?: number /** Max complete raw `rg` stdout bytes a search will parse; larger raw output fails with `SEARCH_RAW_OUTPUT_OVERFLOW`. */ rawOutputMaxBytes?: number /** Terminate-escalation grace (ms), handed to the subprocess seam and bounded by `MAX_TIMER_DELAY_MS`. */ graceMs?: number /** Max bytes retained for one search's stderr tail; the excerpt is embedded in `SEARCH_*` error messages, never shown on success. */ stderrMaxBytes?: number /** * Cooperative tool-call timeout budget (ms) on both tools, enforced by * `@deepseek-ai/dsh-tool-call-timeout-policy` through `exec.signal`. */ timeoutMs?: number } ``` ## `@deepseek-ai/dsh-tool-goal` - `inject`: `agents` · `goals` · `tools` · `systemPrompt` · `sessionProjections` - `source`: [`packages/goal/tool-goal/src/index.ts:32`](../packages/goal/tool-goal/src/index.ts) ```ts config-catalog /** Model policy and hard lower bounds for goal-state updates. */ export interface Config { /** Minimum admitted goal rounds before the model may self-report `blocked`. */ blockedAfterConsecutiveRounds?: number } ``` ## `@deepseek-ai/dsh-tool-jobs` - `inject`: `tools` · `jobs` · `systemPrompt` - `source`: [`packages/jobs/tool-jobs/src/index.ts:41`](../packages/jobs/tool-jobs/src/index.ts) ```ts config-catalog /** Configures bounded `job_output` waits and completion-notice delivery. */ export interface Config { /** Wait duration applied when `job_output` sets `wait` without `timeout_ms` (default 30s). */ waitTimeoutMs?: number /** Hard cap on any single wait; a larger model-supplied `timeout_ms` is clamped down to it (default 10min). */ maxWaitTimeoutMs?: number /** Whether a completion opens a turn on an idle owner (default `wakeup`). */ completionDelivery?: CompletionDelivery /** * Turns one owner may have opened by completion wakes before the next * notice degrades to injection, reset by any user-authored input. Absent by * default: every idle completion wakes its owner. Set it to bound the * self-exciting chain where a woken turn starts the job whose completion * wakes it again, at the cost of notices past the cap waiting silently for * the next user input. */ maxConsecutiveWakes?: number } /** * How an uncollected completion reaches an owner that is already idle: `wakeup` * opens a turn for it, `quiet` leaves it pending until something else wakes the * owner. A busy owner is injected either way. */ export type CompletionDelivery = 'quiet' | 'wakeup' ``` ## `@deepseek-ai/dsh-tool-lsp` - `inject`: `tools` · `lsp` · `systemPrompt` · `workingDirectory` - `source`: [`packages/lsp/tool-lsp/src/index.ts:56`](../packages/lsp/tool-lsp/src/index.ts) ```ts config-catalog /** Plugin configuration: result caps and the timeout budget. */ export interface Config { /** Largest number of rendered locations before an omission marker (default 100). */ maxLocations?: number /** Largest complete rendered result in characters, including truncation metadata (default 16000). */ maxResultChars?: number /** Tool-call timeout budget in ms (default 60000). */ timeoutMs?: number } ``` ## `@deepseek-ai/dsh-tool-present` - `inject`: `tools` · `fs` · `sessionProjections` · `workingDirectory` - `source`: [`packages/deliverables/tool-present/src/index.ts:16`](../packages/deliverables/tool-present/src/index.ts) ```ts config-catalog /** Per-call delivery limit. */ export interface Config { /** Maximum number of files in one call. */ maxFiles: number } ``` ## `@deepseek-ai/dsh-tool-pwsh` - `inject`: `tools` · `shell` · `systemPrompt` · `shellEnv` · `workingDirectory` - `source`: [`packages/shell/tool-pwsh/src/index.ts:54`](../packages/shell/tool-pwsh/src/index.ts) ```ts config-catalog /** Configuration for the pwsh tool. */ export interface Config { /** * Expose `run_in_background` while a job registry is composed (default * true); disabled calls are also rejected. Without a registry the tool is * foreground-only regardless. */ enableRunInBackground?: boolean /** * Keep a foreground command that reaches its timeout running as a * background job instead of killing it (default true). Applies only while * background execution is available: with `enableRunInBackground` false or * no job registry, the executor's deadline kills the command. A foreground * command the registry refuses at its start (admission or a missing * controller) also runs under the deadline kill. */ promoteOnTimeout?: boolean } ``` ## `@deepseek-ai/dsh-tool-pwsh-persistent` - `inject`: `tools` · `terminals` · `workingDirectory` - `source`: [`packages/shell/tool-pwsh-persistent/src/index.ts:458`](../packages/shell/tool-pwsh-persistent/src/index.ts) ```ts config-catalog /** Configuration for the persistent pwsh tool. */ export interface Config { /** PTY backend used for each owner-isolated persistent shell (default `shell`). */ backendType?: string /** Wall-clock limit for one command (default 300000). */ timeoutMs?: number /** Maximum returned command-output characters before clipping (default 16000). */ maxOutputChars?: number /** Model-facing tool description; deployments may describe their environment. */ description?: string } ``` ## `@deepseek-ai/dsh-tool-ralph` - `inject`: `tools` · `workflowEngine` · `subagents` · `systemPrompt` - `source`: [`packages/experimental/tool-ralph/src/index.ts:21`](../packages/experimental/tool-ralph/src/index.ts) ```ts config-catalog /** Deployment policy for the fixed Ralph workflow. */ export interface Config { /** Fresh structured-output provider used for every round (default `spawn`). */ subagentProvider?: string /** Default and deployment ceiling for one call's round count (default 256). */ maxRounds?: number /** Maximum serialized characters in one structured handoff (default 16384). */ maxHandoffChars?: number /** Maximum characters in a successful parent-facing terminal text (default 16384). */ maxResultChars?: number } ``` ## `@deepseek-ai/dsh-tool-session-query` - `inject`: `tools` · `systemPrompt` · `sessionQuery` · `sessionProjections` - `source`: [`packages/experimental/tool-session-query/src/index.ts:28`](../packages/experimental/tool-session-query/src/index.ts) ```ts config-catalog /** Deployment-owned search count and timeout bounds. */ export interface Config { /** Maximum authorized hits returned by one search call. Defaults to 100. */ maxSearchResults?: number /** Cooperative full-text search deadline in milliseconds. Defaults to 30000. */ searchTimeoutMs?: number } ``` ## `@deepseek-ai/dsh-tool-skill` - `inject`: `agents` · `tools` · `skills` · `workingDirectory` - `source`: [`packages/skill/tool-skill/src/index.ts:62`](../packages/skill/tool-skill/src/index.ts) ```ts config-catalog /** Model-facing skill catalog configuration. */ export interface Config { /** Maximum normalized description length rendered in the session catalog; minimum 3. */ catalogDescriptionMaxLength?: number } ``` ## `@deepseek-ai/dsh-tool-str-replace-editor` - `inject`: `tools` · `fs` - `source`: [`packages/fs/tool-str-replace-editor/src/index.ts:506`](../packages/fs/tool-str-replace-editor/src/index.ts) ```ts config-catalog /** Configuration for the string-replacement editor tool. */ export interface Config { /** Maximum returned view characters before clipping (default 16000). */ maxOutputChars?: number /** Model-facing tool description. */ description?: string } ``` ## `@deepseek-ai/dsh-tool-subagent` - `inject`: `tools` · `subagents` · `systemPrompt` · `sessionProjections` - `refs`: [`AgentOptions`](subsystems/core.zh.md) - `source`: [`packages/subagent/tool-subagent/src/index.ts:48`](../packages/subagent/tool-subagent/src/index.ts) ```ts config-catalog /** Config: which registered provider this tool delegates to, plus child defaults. */ export interface Config { /** The `ctx.subagents` provider name to start runs on (e.g. `spawn`, `acp`). */ provider: string /** * Model-facing tool name (default `subagent`). Each loaded instance must use * a distinct name. */ toolName?: string /** * Sample the Host `subagent-model-selection` setting for each new top-level * Session and inherit that decision in its child Sessions. */ modelSelectionSettings?: boolean /** * Agent options applied to every child; omitted fields use child-loop defaults. */ agentOptions?: AgentOptions /** * Per-child persona that shadows `deployment:persona-prefix`. Requires the * provider's `persona` capability; omission preserves the deployment persona. */ persona?: string /** * Tool filter applied to every child. Filtered tools disappear from its * prompt and reject execution. Requires the provider's `toolFilter` * capability; unknown names fail startup. */ toolFilter?: { /** Global tool names the child keeps; everything else is removed. */ allow?: string[] /** Global tool names removed from the child. */ deny?: string[] } /** * Maximum child depth: a non-negative safe integer (`0` forbids delegation), * or `'provider-managed'` to send no cap. A numeric cap * requires the provider's `depthLimit` capability (mount fails loud * otherwise). The provider checks the calling agent's current depth at every * start; the tool remains model-visible so runtime policy owns rejection. * `'provider-managed'` is for an out-of-process provider whose recursion * budget belongs to the child runtime or its own deployment. Omission reads * the current Host subagent depth setting (default `1`) at each delegation. */ maxDepth?: number | 'provider-managed' } ``` ## `@deepseek-ai/dsh-tool-terminal` - `inject`: `terminals` · `tools` · `systemPrompt` · `workingDirectory` - `source`: [`packages/experimental/tool-terminal/src/index.ts:38`](../packages/experimental/tool-terminal/src/index.ts) ```ts config-catalog /** Model-facing terminal tool configuration. */ export interface Config { /** Expose `run_in_background` and accept background sends (default true). */ enableRunInBackground?: boolean /** Maximum UTF-8 bytes in one complete terminal or task-output result. */ maxResultBytes?: number } ``` ## `@deepseek-ai/dsh-tool-todo` - `inject`: `tools` · `sessionProjections` - `source`: [`packages/todo/tool-todo/src/index.ts:29`](../packages/todo/tool-todo/src/index.ts) ```ts config-catalog /** Model-facing todo tool configuration. */ export interface Config { /** * Required deployment choice for whether several todos may be `in_progress` at once. True suits * agents that run work concurrently — subagents, background commands, workflow fan-out — and the * description then instructs the model to mark every actively worked task. False restores the * single-active discipline: the description asks for exactly one, and a call marking more is * rejected. */ allowParallelInProgress: boolean } ``` ## `@deepseek-ai/dsh-tool-web` - `inject`: `tools` · `web` · `systemPrompt` - `source`: [`packages/web/tool-web/src/index.ts:37`](../packages/web/tool-web/src/index.ts) ```ts config-catalog /** Plugin config: which web tools to register, search bounds, per-tool budgets, and the fetch output cap. */ export interface Config { /** Register `web_search`. Defaults to true. */ search?: boolean /** Register `web_fetch`. Defaults to true. */ fetch?: boolean /** Upper bound on sources returned by one `web_search` call. */ searchMaxResults?: number /** Upper bound on queries accepted by one `web_search` call. */ searchMaxQueries?: number /** Cooperative timeout budget (ms) for `web_fetch`. Defaults to 30000. */ fetchTimeoutMs?: number /** Cooperative timeout budget (ms) for `web_search`. Defaults to 30000. */ searchTimeoutMs?: number /** Cap on source characters converted and complete `web_fetch` output characters. Defaults to 200000. */ fetchMaxOutputChars?: number } ``` ## `@deepseek-ai/dsh-tool-workflow` - `inject`: `tools` · `workflowEngine` · `systemPrompt` - `source`: [`packages/workflow/tool-workflow/src/index.ts:44`](../packages/workflow/tool-workflow/src/index.ts) ```ts config-catalog /** Config: the model-facing tool name plus result rendering caps. */ export interface Config { /** The model-facing tool name to register (default `workflow`). */ toolName?: string /** Rendered-result ceiling, in characters: a longer JSON value is truncated with a notice (default 50000). */ maxResultChars?: number /** * Expose `run_in_background` (default true); disabled calls are also * rejected. A background run needs a live `ctx.jobs` registry with a * controller serving the caller (`dsh-jobs-local` plus `dsh-tool-jobs` in * the shipped composition); without one the call fails with the missing * piece named. */ enableRunInBackground?: boolean } ``` ## `@deepseek-ai/dsh-tool-workspace-dependencies` - `inject`: `tools` - `source`: [`packages/skill/tool-workspace-dependencies/src/index.ts:15`](../packages/skill/tool-workspace-dependencies/src/index.ts) ```ts config-catalog /** Payload location and optional installation directory. */ export interface Config { /** Payload directory carrying `runtime.json` and `dependencies/`. */ readonly source: string /** * Installation directory under the Harness home. When set, the payload is copied there on the * first call (the Desktop behavior); when omitted, the payload is used in place without copying, * which suits read-only carriers such as container image layers. */ readonly root?: string } ``` ## `@deepseek-ai/dsh-tools` - `inject`: `systemPrompt` - `source`: [`packages/core/tools/src/index.ts:675`](../packages/core/tools/src/index.ts) ```ts config-catalog /** Plugin config: how the registered tools are presented to the model. */ export interface Config { /** * Model presentation. `native` (default) sends every visible schema; `ptc` * sends only `run_code` plus a generated SDK prompt and collapses the * executor to the same surface (a model-direct call may only name * `run_code`; `run_code` SDK sub-dispatches keep every visible tool). * PTC mode requires a `ctx.ptcRuntime` whose `language` * has a registered SDK renderer (TypeScript or Python) and fails prompt * assembly when it is absent or has no renderer. Under `ptc`, native names * in `toolOrder` are invalid. */ mode?: ToolPresentationMode /** * Concurrency cap for a `run_code` program's overlapping sub-calls * (default 10, the loop scheduler's own default). Sub-calls follow the * native scheduling contract — only calls whose tools classify * concurrency-safe overlap; exclusive calls form barriers — so `1` * restores strictly serial dispatch. Must be a positive integer. */ maxParallelSubCalls?: number } /** How the registry presents its tools to the model (see {@link Config.mode}). */ export type ToolPresentationMode = 'native' | 'ptc' ``` ## `@deepseek-ai/dsh-typert-loader` - `inject`: `typert` · `loader` - `source`: [`packages/typert/loader/src/index.ts:48`](../packages/typert/loader/src/index.ts) ```ts config-catalog /** Additional package artifacts whose owning plugins are nested behind another Loader entry. */ export interface Config { /** Exact npm package names that must resolve and export `./typert`. */ packages?: string[] } ``` ## `@deepseek-ai/dsh-user-approval` - `source`: [`packages/interaction/user-approval/src/index.ts:135`](../packages/interaction/user-approval/src/index.ts) ```ts config-catalog /** Plugin config. All optional — `static Config` supplies the defaults. */ export interface Config { /** * The deployment's default {@link ApprovalPolicy} for sessions without an * `approval/policy` override — `'ask'` delegates to the composed answerers * (fail-closed with none); `'never'` auto-rejects every ask without * prompting (the deterministic CI/unattended stance). */ readonly policy?: ApprovalPolicy } /** * A session's approval policy — what happens to an {@link ApprovalService} * ask BEFORE any interactive answerer sees it: * * - `'ask'` (the default) — delegate to the composed answerers; with none * composed the chain falls through to the fail-closed `'unavailable'`. * - `'never'` — never prompt anyone: every ask resolves `'rejected'` * deterministically. The strict headless stance (CI, unattended runs) and * the policy whose outcome is knowable without asking. */ export type ApprovalPolicy = 'ask' | 'never' ``` ## `@deepseek-ai/dsh-web` - `source`: [`packages/web/web/src/index.ts:55`](../packages/web/web/src/index.ts) ```ts config-catalog /** * Config for the web seam. `searchProvider` / `fetchProvider` pin which provider * wins for each capability; both are optional (a single registered usable * provider auto-selects). Operational overrides such as environment variables * must feed these same fields rather than introduce a hidden priority chain. */ export interface WebRuntimeConfig { /** Explicit search provider id. Omitted = auto-select when exactly one usable. */ readonly searchProvider?: string /** Explicit fetch provider id. Omitted = auto-select when exactly one usable. */ readonly fetchProvider?: string } ``` ## `@deepseek-ai/dsh-web-app` - `inject`: `webServer` - `source`: [`packages/bundle/web-app/src/index.ts:43`](../packages/bundle/web-app/src/index.ts) ```ts config-catalog /** Plugin config: composed deployment settings plus per-invocation command-line values. */ export interface Config { /** Permit default-browser handoff after the Loader tree settles; an SSH launch suppresses it. */ openBrowser: boolean /** Print the URL line on activation; a non-interactive layer can turn it off. */ printUrl: boolean /** * Register the model-visible surface context (the `app:web-surface` prompt * section and the `DSH_WEB_URL` bash variable). A one-shot non-interactive * layer can turn it off when its user is not in the GUI, so the * orientation text would be false. */ surfaceContext: boolean /** * Canonical HTTP(S) root to advertise in the printed and opened URL, * `DSH_WEB_URL`, and the web-surface orientation, e.g. * `https://app.example/ui/`, normalized to end in `/`. Configures no routing * or authentication; see [public deployments](../README.md#public-deployments). * Absent or YAML `null` advertises the bind-address URL. */ publicUrl?: string } ``` ## `@deepseek-ai/dsh-web-fetch-http` - `inject`: `web` - `source`: [`packages/web/web-fetch-http/src/index.ts:32`](../packages/web/web-fetch-http/src/index.ts) ```ts config-catalog /** Plugin config: the provider's transport and size limits plus its `User-Agent` (all defaulted). */ export interface Config { /** Maximum response body size in bytes. */ maxResponseBytes?: number /** Maximum decoded body length in characters. */ maxBodyChars?: number /** Default fetch timeout in milliseconds, within Node's timer range. */ timeoutMs?: number /** Maximum number of same-origin redirect hops to follow. */ maxRedirects?: number /** `User-Agent` header sent on every request. */ userAgent?: string } ``` ## `@deepseek-ai/dsh-web-search-deepseek` - `inject`: `web` - `refs`: `Volatile` (`@deepseek-ai/cordis`) - `source`: [`packages/web/web-search-deepseek/src/index.ts:49`](../packages/web/web-search-deepseek/src/index.ts) ```ts config-catalog /** Plugin config (all optional — `apply` fills env-var and constant defaults). */ export interface Config { /** Literal DeepSeek API key; prefer {@link apiKeyEnv} so no secret enters configuration files. */ apiKey: Volatile /** Credential reference resolved for each search; defaults to `DEEPSEEK_API_KEY`. */ apiKeyEnv: Volatile /** Anthropic-compatible endpoint base; `/messages` is appended. */ baseURL: Volatile /** Anthropic-format model name. Defaults to `deepseek-v4-flash`. */ model: Volatile /** `anthropic-version` header value. Defaults to `2023-06-01`. */ apiVersion: Volatile /** Upper bound on generated tokens for the Messages request. Defaults to 4096. */ maxTokens: Volatile /** Maximum `web_search` server-tool uses per request. Defaults to 5. */ maxUses: Volatile } ``` ## `@deepseek-ai/dsh-web-search-exa` - `inject`: `web` - `source`: [`packages/web/web-search-exa/src/index.ts:35`](../packages/web/web-search-exa/src/index.ts) ```ts config-catalog /** Plugin config (all optional — `apply` fills env-var and constant defaults). */ export interface Config { /** Exa API key. Falls back to `$EXA_API_KEY`. Empty → provider unavailable. */ apiKey?: string /** Endpoint base; `/search` is appended. Defaults to the public API. */ baseURL?: string /** Retrieval mode sent as Exa's `type`. Defaults to `auto`. */ searchType?: 'auto' | 'keyword' | 'neural' /** Default result count when a request carries no `maxResults`. Omitted = none. */ numResults?: number /** Highlight sentences requested per result. Defaults to 1. */ highlightsPerResult?: number } ``` ## `@deepseek-ai/dsh-web-search-perplexity` - `inject`: `web` - `source`: [`packages/web/web-search-perplexity/src/index.ts:30`](../packages/web/web-search-perplexity/src/index.ts) ```ts config-catalog /** Plugin config (all optional — `apply` fills env-var and constant defaults). */ export interface Config { /** Perplexity API key. Falls back to `$PERPLEXITY_API_KEY`. Empty → unavailable. */ apiKey?: string /** Endpoint base; `/chat/completions` is appended. Defaults to the public API. */ baseURL?: string /** Search model name. Defaults to `sonar`. */ model?: string /** Upper bound on generated answer tokens. Defaults to 1024. */ maxTokens?: number /** Recency window sent as `search_recency_filter`. Omitted = no filter. */ searchRecency?: 'day' | 'week' | 'month' | 'year' } ``` ## `@deepseek-ai/dsh-webhook-github` - `inject`: `webServer` · `webhookRuntime` · `credentials` - `source`: [`packages/experimental/webhook-github/src/index.ts:17`](../packages/experimental/webhook-github/src/index.ts) ```ts config-catalog /** Required GitHub ingress configuration. */ export interface Config { /** Adapter instance name carried to rules. */ readonly source: string /** Exact absolute route path. */ readonly path: string /** Credential reference containing the shared webhook secret. */ readonly secretEnv: string /** Positive raw body ceiling in bytes. */ readonly maxBodyBytes: number } ``` ## `@deepseek-ai/dsh-workflow-ptc` - `inject`: `subagents` · `ptcRuntime` · `sandboxPolicy` · `workingDirectory` - `source`: [`packages/workflow/workflow-ptc/src/index.ts:33`](../packages/workflow/workflow-ptc/src/index.ts) ```ts config-catalog /** Plugin config (all optional — `static Config` supplies the defaults). */ export interface Config { /** The `ctx.subagents` provider children run on (default `spawn`). */ provider?: string /** Concurrent `agent()` ceiling; `0` (the default) auto-resolves to `min(16, max(1, cores - 2))`. */ maxConcurrentAgents?: number /** Total `agent()` calls one run may start — the runaway-loop backstop (default 1000). */ maxTotalAgents?: number /** Items accepted by a single `parallel()`/`pipeline()` call (default 4096). */ maxItemsPerCall?: number /** VM timeout for the script's initial synchronous slice (default 5000 ms). */ syncTimeoutMs?: number } ``` ## `@deepseek-ai/dsh-working-directory` - `inject`: `fs` · `sessionProjections` · `systemPrompt` - `source`: [`packages/session/working-directory/src/index.ts:56`](../packages/session/working-directory/src/index.ts) ```ts config-catalog /** Deployment default for Sessions without an original project directory. */ export interface Config { /** Absolute execution-world fallback directory; omitted values use the launch directory. */ defaultDirectory?: string } ``` ## `@deepseek-ai/dsh-workspace-changes` - `inject`: `subprocess` · `fs` - `source`: [`packages/deliverables/workspace-changes/src/index.ts:34`](../packages/deliverables/workspace-changes/src/index.ts) ```ts config-catalog /** Snapshot, capture, and comparison bounds. Invalid values fail plugin load. */ export interface Config { /** Milliseconds one git command may run before the turn's record is abandoned. */ timeoutMs: number /** Bytes of git output retained per command; a larger diff listing abandons the record. */ outputMaxBytes: number /** Maximum files carried by one summary; `total` still reports the complete count. */ maxFiles: number /** * Bytes a file may hold to be captured around a file-tool edit or read from a snapshot for its comparison. * A larger file gets no comparison; one captured around a file-tool edit is also listed without counts. */ maxFileBytes: number /** Milliseconds a line comparison may run before it degrades to whole-file replacement. */ diffTimeoutMs: number } ``` ## 无配置的可加载插件 这些插件通过 `cordis.yml` 中不含 `config:` 块的条目加载；它们未声明任何配置接口。 | `package` | `inject` | `source` | | --- | --- | --- | | `@deepseek-ai/dsh-acp-app` | `cmdlineArgs` | [`packages/bundle/acp-app/src/index.ts`](../packages/bundle/acp-app/src/index.ts) | | `@deepseek-ai/dsh-agent` | — | [`packages/core/agent/src/index.ts`](../packages/core/agent/src/index.ts) | | `@deepseek-ai/dsh-api-account-controller` | `deepseekAccount` · `agents` | [`packages/api/account-controller/src/index.ts`](../packages/api/account-controller/src/index.ts) | | `@deepseek-ai/dsh-api-remotes` | `typertGateway` | [`packages/api/remotes/src/index.ts`](../packages/api/remotes/src/index.ts) | | `@deepseek-ai/dsh-authorization` | `credentials` | [`packages/credentials/authorization/src/index.ts`](../packages/credentials/authorization/src/index.ts) | | `@deepseek-ai/dsh-browser-use` | — | [`packages/browser-use/browser-use/src/index.ts`](../packages/browser-use/browser-use/src/index.ts) | | `@deepseek-ai/dsh-client-file-upload` | `agents` · `attachments` · `commands` · `connection` | [`packages/client/file-upload/src/index.ts`](../packages/client/file-upload/src/index.ts) | | `@deepseek-ai/dsh-client-locale` | — | [`packages/client/locale/src/index.ts`](../packages/client/locale/src/index.ts) | | `@deepseek-ai/dsh-client-modules` | `loader` | [`packages/client/modules/src/index.ts`](../packages/client/modules/src/index.ts) | | `@deepseek-ai/dsh-client-resources` | — | [`packages/client/resources/src/index.ts`](../packages/client/resources/src/index.ts) | | `@deepseek-ai/dsh-client-ui-agent-preset` | — | [`packages/client/ui-agent-preset/src/index.ts`](../packages/client/ui-agent-preset/src/index.ts) | | `@deepseek-ai/dsh-client-ui-approval` | — | [`packages/client/ui-approval/src/index.ts`](../packages/client/ui-approval/src/index.ts) | | `@deepseek-ai/dsh-client-ui-attachment` | — | [`packages/client/ui-attachment/src/index.ts`](../packages/client/ui-attachment/src/index.ts) | | `@deepseek-ai/dsh-client-ui-brand-official` | — | [`packages/client/ui-brand-official/src/index.ts`](../packages/client/ui-brand-official/src/index.ts) | | `@deepseek-ai/dsh-client-ui-chat` | — | [`packages/client/ui-chat/src/index.ts`](../packages/client/ui-chat/src/index.ts) | | `@deepseek-ai/dsh-client-ui-commands` | — | [`packages/client/ui-commands/src/index.ts`](../packages/client/ui-commands/src/index.ts) | | `@deepseek-ai/dsh-client-ui-conversation` | — | [`packages/client/ui-conversation/src/index.ts`](../packages/client/ui-conversation/src/index.ts) | | `@deepseek-ai/dsh-client-ui-cordis` | — | [`packages/extensions/ui-cordis/src/index.ts`](../packages/extensions/ui-cordis/src/index.ts) | | `@deepseek-ai/dsh-client-ui-deliverables` | `systemPrompt` · `connection` · `sessionQuery` · `sessionController` · `workspaceFiles` · `fs` · `sandboxPolicy` · `workspaceChanges` | [`packages/client/ui-deliverables/src/index.ts`](../packages/client/ui-deliverables/src/index.ts) | | `@deepseek-ai/dsh-client-ui-directory-picker-browse` | — | [`packages/client/ui-directory-picker-browse/src/index.ts`](../packages/client/ui-directory-picker-browse/src/index.ts) | | `@deepseek-ai/dsh-client-ui-directory-picker-native` | — | [`packages/client/ui-directory-picker-native/src/index.ts`](../packages/client/ui-directory-picker-native/src/index.ts) | | `@deepseek-ai/dsh-client-ui-goal` | — | [`packages/client/ui-goal/src/index.ts`](../packages/client/ui-goal/src/index.ts) | | `@deepseek-ai/dsh-client-ui-input-trigger` | — | [`packages/client/ui-input-trigger/src/index.ts`](../packages/client/ui-input-trigger/src/index.ts) | | `@deepseek-ai/dsh-client-ui-jobs` | — | [`packages/client/ui-jobs/src/index.ts`](../packages/client/ui-jobs/src/index.ts) | | `@deepseek-ai/dsh-client-ui-layout` | — | [`packages/client/ui-layout/src/index.ts`](../packages/client/ui-layout/src/index.ts) | | `@deepseek-ai/dsh-client-ui-message-feedback` | — | [`packages/client/ui-message-feedback/src/index.ts`](../packages/client/ui-message-feedback/src/index.ts) | | `@deepseek-ai/dsh-client-ui-model-selection` | — | [`packages/client/ui-model-selection/src/index.ts`](../packages/client/ui-model-selection/src/index.ts) | | `@deepseek-ai/dsh-client-ui-open-in-app` | — | [`packages/client/ui-open-in-app/src/index.ts`](../packages/client/ui-open-in-app/src/index.ts) | | `@deepseek-ai/dsh-client-ui-permission-presets` | — | [`packages/client/ui-permission-presets/src/index.ts`](../packages/client/ui-permission-presets/src/index.ts) | | `@deepseek-ai/dsh-client-ui-plan` | — | [`packages/client/ui-plan/src/index.ts`](../packages/client/ui-plan/src/index.ts) | | `@deepseek-ai/dsh-client-ui-reference` | — | [`packages/client/ui-reference/src/index.ts`](../packages/client/ui-reference/src/index.ts) | | `@deepseek-ai/dsh-client-ui-renderer` | — | [`packages/client/ui-renderer/src/index.ts`](../packages/client/ui-renderer/src/index.ts) | | `@deepseek-ai/dsh-client-ui-schedule` | — | [`packages/client/ui-schedule/src/index.ts`](../packages/client/ui-schedule/src/index.ts) | | `@deepseek-ai/dsh-client-ui-session` | — | [`packages/client/ui-session/src/index.ts`](../packages/client/ui-session/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings` | — | [`packages/client/ui-settings/src/index.ts`](../packages/client/ui-settings/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings-agent-loop` | — | [`packages/client/ui-settings-agent-loop/src/index.ts`](../packages/client/ui-settings-agent-loop/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings-general` | — | [`packages/client/ui-settings-general/src/index.ts`](../packages/client/ui-settings-general/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings-plugin-inventory` | — | [`packages/client/ui-settings-plugin-inventory/src/index.ts`](../packages/client/ui-settings-plugin-inventory/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings-plugins` | — | [`packages/client/ui-settings-plugins/src/index.ts`](../packages/client/ui-settings-plugins/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings-session-log` | — | [`packages/client/ui-settings-session-log/src/index.ts`](../packages/client/ui-settings-session-log/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings-shell` | — | [`packages/client/ui-settings-shell/src/index.ts`](../packages/client/ui-settings-shell/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings-subagent` | — | [`packages/client/ui-settings-subagent/src/index.ts`](../packages/client/ui-settings-subagent/src/index.ts) | | `@deepseek-ai/dsh-client-ui-settings-web-search` | — | [`packages/client/ui-settings-web-search/src/index.ts`](../packages/client/ui-settings-web-search/src/index.ts) | | `@deepseek-ai/dsh-client-ui-shortcuts` | — | [`packages/client/ui-shortcuts/src/index.ts`](../packages/client/ui-shortcuts/src/index.ts) | | `@deepseek-ai/dsh-client-ui-sidebar` | — | [`packages/client/ui-sidebar/src/index.ts`](../packages/client/ui-sidebar/src/index.ts) | | `@deepseek-ai/dsh-client-ui-sidebar-browser` | — | [`packages/client/ui-sidebar-browser/src/index.ts`](../packages/client/ui-sidebar-browser/src/index.ts) | | `@deepseek-ai/dsh-client-ui-sidebar-files` | — | [`packages/client/ui-sidebar-files/src/index.ts`](../packages/client/ui-sidebar-files/src/index.ts) | | `@deepseek-ai/dsh-client-ui-sidebar-right` | — | [`packages/client/ui-sidebar-right/src/index.ts`](../packages/client/ui-sidebar-right/src/index.ts) | | `@deepseek-ai/dsh-client-ui-sidebar-terminal` | — | [`packages/client/ui-sidebar-terminal/src/index.ts`](../packages/client/ui-sidebar-terminal/src/index.ts) | | `@deepseek-ai/dsh-client-ui-skill` | — | [`packages/client/ui-skill/src/index.ts`](../packages/client/ui-skill/src/index.ts) | | `@deepseek-ai/dsh-client-ui-subagent` | — | [`packages/client/ui-subagent/src/index.ts`](../packages/client/ui-subagent/src/index.ts) | | `@deepseek-ai/dsh-client-ui-tool` | — | [`packages/client/ui-tool/src/index.ts`](../packages/client/ui-tool/src/index.ts) | | `@deepseek-ai/dsh-client-ui-trajectory` | — | [`packages/client/ui-trajectory/src/index.ts`](../packages/client/ui-trajectory/src/index.ts) | | `@deepseek-ai/dsh-client-ui-user-questions` | — | [`packages/client/ui-user-questions/src/index.ts`](../packages/client/ui-user-questions/src/index.ts) | | `@deepseek-ai/dsh-client-ui-workflow-run` | — | [`packages/client/ui-workflow-run/src/index.ts`](../packages/client/ui-workflow-run/src/index.ts) | | `@deepseek-ai/dsh-client-ui-workspace` | — | [`packages/client/ui-workspace/src/index.ts`](../packages/client/ui-workspace/src/index.ts) | | `@deepseek-ai/dsh-command-compact` | `commands` · `compaction` | [`packages/compaction/command-compact/src/index.ts`](../packages/compaction/command-compact/src/index.ts) | | `@deepseek-ai/dsh-command-feedback` | `commands` | [`packages/feedback/command-feedback/src/index.ts`](../packages/feedback/command-feedback/src/index.ts) | | `@deepseek-ai/dsh-command-goal` | `commands` · `goals` | [`packages/goal/command-goal/src/index.ts`](../packages/goal/command-goal/src/index.ts) | | `@deepseek-ai/dsh-commands` | — | [`packages/interaction/commands/src/index.ts`](../packages/interaction/commands/src/index.ts) | | `@deepseek-ai/dsh-compaction-image-offload` | `agents` · `sessions` | [`packages/compaction/compaction-image-offload/src/index.ts`](../packages/compaction/compaction-image-offload/src/index.ts) | | `@deepseek-ai/dsh-computer-use` | — | [`packages/computer-use/computer-use/src/index.ts`](../packages/computer-use/computer-use/src/index.ts) | | `@deepseek-ai/dsh-config-editor` | `loader` · `profileContext` | [`packages/boot/config-editor/src/index.ts`](../packages/boot/config-editor/src/index.ts) | | `@deepseek-ai/dsh-cordis-client-runner` | — | [`packages/extensions/cordis-client-runner/src/index.ts`](../packages/extensions/cordis-client-runner/src/index.ts) | | `@deepseek-ai/dsh-deepseek-llm-api-extensions` | — | [`packages/llm/deepseek-llm-api-extensions/src/index.ts`](../packages/llm/deepseek-llm-api-extensions/src/index.ts) | | `@deepseek-ai/dsh-experimental-auto-review` | `approval` · `llm` · `permissionPresets` · `sessions` · `tools` · `workingDirectory` | [`packages/experimental/auto-review/src/index.ts`](../packages/experimental/auto-review/src/index.ts) | | `@deepseek-ai/dsh-experimental-client-ui-agent-team` | — | [`packages/experimental/client-ui-agent-team/src/index.ts`](../packages/experimental/client-ui-agent-team/src/index.ts) | | `@deepseek-ai/dsh-experimental-client-ui-claude-code-mods` | — | [`packages/experimental/client-ui-claude-code-mods/src/index.ts`](../packages/experimental/client-ui-claude-code-mods/src/index.ts) | | `@deepseek-ai/dsh-experimental-client-ui-voice-input` | — | [`packages/experimental/client-ui-voice-input/src/index.ts`](../packages/experimental/client-ui-voice-input/src/index.ts) | | `@deepseek-ai/dsh-experimental-computer-use-cua-driver-native` | `computerUse` · `tools` · `systemPrompt` | [`packages/experimental/computer-use-cua-driver-native/src/index.ts`](../packages/experimental/computer-use-cua-driver-native/src/index.ts) | | `@deepseek-ai/dsh-experimental-session-inspector` | — | [`packages/experimental/session-inspector/src/index.ts`](../packages/experimental/session-inspector/src/index.ts) | | `@deepseek-ai/dsh-experimental-tool-worktree` | `tools` · `worktrees` | [`packages/experimental/tool-worktree/src/index.ts`](../packages/experimental/tool-worktree/src/index.ts) | | `@deepseek-ai/dsh-fs-observation-policy` | — | [`packages/fs/fs-observation-policy/src/index.ts`](../packages/fs/fs-observation-policy/src/index.ts) | | `@deepseek-ai/dsh-fs-ssh` | `ssh` · `sandboxPolicy` | [`packages/ssh/fs-ssh/src/index.ts`](../packages/ssh/fs-ssh/src/index.ts) | | `@deepseek-ai/dsh-goal-round-driver` | `agents` · `goals` · `sessions` | [`packages/goal/goal-round-driver/src/index.ts`](../packages/goal/goal-round-driver/src/index.ts) | | `@deepseek-ai/dsh-host-directory-picker-auto` | `webServer` · `connection` · `loader` | [`packages/host/directory-picker-auto/src/index.ts`](../packages/host/directory-picker-auto/src/index.ts) | | `@deepseek-ai/dsh-host-directory-picker-native` | — | [`packages/host/directory-picker-native/src/index.ts`](../packages/host/directory-picker-native/src/index.ts) | | `@deepseek-ai/dsh-host-plugin-inventory` | `loader` | [`packages/host/plugin-inventory/src/index.ts`](../packages/host/plugin-inventory/src/index.ts) | | `@deepseek-ai/dsh-llm` | — | [`packages/llm/llm/src/index.ts`](../packages/llm/llm/src/index.ts) | | `@deepseek-ai/dsh-lsp` | — | [`packages/lsp/lsp/src/index.ts`](../packages/lsp/lsp/src/index.ts) | | `@deepseek-ai/dsh-mcp-resources` | `tools` | [`packages/mcp/mcp-resources/src/index.ts`](../packages/mcp/mcp-resources/src/index.ts) | | `@deepseek-ai/dsh-otel` | — | [`packages/telemetry/otel/src/index.ts`](../packages/telemetry/otel/src/index.ts) | | `@deepseek-ai/dsh-sandbox-ssh` | `ssh` | [`packages/ssh/sandbox-ssh/src/index.ts`](../packages/ssh/sandbox-ssh/src/index.ts) | | `@deepseek-ai/dsh-session` | — | [`packages/core/session/src/index.ts`](../packages/core/session/src/index.ts) | | `@deepseek-ai/dsh-session-checkpoint-policy` | `llm` · `sessionPersistence` · `sessions` · `tools` | [`packages/session/session-checkpoint-policy/src/index.ts`](../packages/session/session-checkpoint-policy/src/index.ts) | | `@deepseek-ai/dsh-session-projection` | — | [`packages/session/session-projection/src/index.ts`](../packages/session/session-projection/src/index.ts) | | `@deepseek-ai/dsh-session-stats` | `sessionProjections` | [`packages/session/session-stats/src/index.ts`](../packages/session/session-stats/src/index.ts) | | `@deepseek-ai/dsh-session-turn-outline` | `sessionProjections` | [`packages/session/session-turn-outline/src/index.ts`](../packages/session/session-turn-outline/src/index.ts) | | `@deepseek-ai/dsh-settings` | `configEditor` · `profileContext` | [`packages/settings/settings/src/index.ts`](../packages/settings/settings/src/index.ts) | | `@deepseek-ai/dsh-skill-badge` | `skills` | [`packages/experimental/skill-badge/src/index.ts`](../packages/experimental/skill-badge/src/index.ts) | | `@deepseek-ai/dsh-storage` | — | [`packages/storage/storage/src/index.ts`](../packages/storage/storage/src/index.ts) | | `@deepseek-ai/dsh-subprocess-local` | — | [`packages/subprocess/subprocess-local/src/index.ts`](../packages/subprocess/subprocess-local/src/index.ts) | | `@deepseek-ai/dsh-subprocess-ssh` | `ssh` | [`packages/ssh/subprocess-ssh/src/index.ts`](../packages/ssh/subprocess-ssh/src/index.ts) | | `@deepseek-ai/dsh-terminal` | — | [`packages/terminal/terminal/src/index.ts`](../packages/terminal/terminal/src/index.ts) | | `@deepseek-ai/dsh-tool-call-timeout-policy` | `tools` | [`packages/guard/timeout-policy/src/index.ts`](../packages/guard/timeout-policy/src/index.ts) | | `@deepseek-ai/dsh-tool-cordis` | `tools` · `cordisInspect` | [`packages/extensions/tool-cordis/src/index.ts`](../packages/extensions/tool-cordis/src/index.ts) | | `@deepseek-ai/dsh-tool-schedule` | `tools` | [`packages/schedule/tool-schedule/src/index.ts`](../packages/schedule/tool-schedule/src/index.ts) | | `@deepseek-ai/dsh-tool-subagent-control` | `tools` · `subagents` | [`packages/subagent/tool-subagent-control/src/index.ts`](../packages/subagent/tool-subagent-control/src/index.ts) | | `@deepseek-ai/dsh-tool-working-directory` | `tools` · `workingDirectory` | [`packages/session/tool-working-directory/src/index.ts`](../packages/session/tool-working-directory/src/index.ts) | | `@deepseek-ai/dsh-user-questions` | — | [`packages/interaction/user-questions/src/index.ts`](../packages/interaction/user-questions/src/index.ts) | | `@deepseek-ai/dsh-webhook` | `agents` · `agentDefaultModel` · `agentPresets` · `permissionPresets` · `sessionTitle` · `workspaceRegistry` | [`packages/experimental/webhook/src/index.ts`](../packages/experimental/webhook/src/index.ts) | | `@deepseek-ai/dsh-workspace` | `storageDomain` · `sessionPersistence` | [`packages/workspace/workspace/src/index.ts`](../packages/workspace/workspace/src/index.ts) | ## Seam 包（不可直接加载） 抽象服务类——部署时应改为加载具体的实现包（参见[能力 seam](../.agents/notes/implemented/architecture/2026-06-13-capability-seams.zh.md)）。 | `package` | `class` | `inject` | `source` | | --- | --- | --- | --- | | `@deepseek-ai/dsh-attachment` | `AttachmentStore` | — | [`packages/attachment/attachment/src/index.ts`](../packages/attachment/attachment/src/index.ts) | | `@deepseek-ai/dsh-compaction` | `CompactionEngine` | — | [`packages/compaction/compaction/src/index.ts`](../packages/compaction/compaction/src/index.ts) | | `@deepseek-ai/dsh-credentials` | `CredentialProvider` | — | [`packages/credentials/credentials/src/index.ts`](../packages/credentials/credentials/src/index.ts) | | `@deepseek-ai/dsh-deepseek-account` | `DeepSeekAccount` | — | [`packages/credentials/deepseek-account/src/index.ts`](../packages/credentials/deepseek-account/src/index.ts) | | `@deepseek-ai/dsh-file-reference` | `FileReferenceService` | — | [`packages/context/file-reference/src/index.ts`](../packages/context/file-reference/src/index.ts) | | `@deepseek-ai/dsh-fs` | `FileSystem` | — | [`packages/fs/fs/src/index.ts`](../packages/fs/fs/src/index.ts) | | `@deepseek-ai/dsh-host-directory-picker` | `DirectoryPicker` | — | [`packages/host/directory-picker/src/index.ts`](../packages/host/directory-picker/src/index.ts) | | `@deepseek-ai/dsh-jobs` | `JobRegistry` | — | [`packages/jobs/jobs/src/index.ts`](../packages/jobs/jobs/src/index.ts) | | `@deepseek-ai/dsh-ptc-runtime` | `PtcRuntime` | — | [`packages/ptc-runtime/ptc-runtime/src/index.ts`](../packages/ptc-runtime/ptc-runtime/src/index.ts) | | `@deepseek-ai/dsh-sandbox` | `SandboxProvider` | — | [`packages/sandbox/sandbox/src/index.ts`](../packages/sandbox/sandbox/src/index.ts) | | `@deepseek-ai/dsh-session-persistence` | `SessionPersistence` | — | [`packages/session/session-persistence/src/index.ts`](../packages/session/session-persistence/src/index.ts) | | `@deepseek-ai/dsh-session-query` | `SessionQueryEngine` | — | [`packages/session-query/session-query/src/index.ts`](../packages/session-query/session-query/src/index.ts) | | `@deepseek-ai/dsh-shell` | `ShellExecutor` | — | [`packages/shell/shell/src/index.ts`](../packages/shell/shell/src/index.ts) | | `@deepseek-ai/dsh-spill` | `SpillStore` | — | [`packages/spill/spill/src/index.ts`](../packages/spill/spill/src/index.ts) | | `@deepseek-ai/dsh-subprocess` | `SubprocessRuntime` | — | [`packages/subprocess/subprocess/src/index.ts`](../packages/subprocess/subprocess/src/index.ts) | | `@deepseek-ai/dsh-workflow` | `WorkflowEngine` | — | [`packages/workflow/workflow/src/index.ts`](../packages/workflow/workflow/src/index.ts) | ## 库包（无插件入口） 由其他包作为库导入；`cordis.yml` 无法加载它们。 | `package` | `inject` | `source` | | --- | --- | --- | | `@deepseek-ai/dsh-agent-loop-testkit` | — | [`packages/test-support/agent-loop-testkit/src/index.ts`](../packages/test-support/agent-loop-testkit/src/index.ts) | | `@deepseek-ai/dsh-anonymous-user-id` | — | [`packages/identity/anonymous-user-id/src/index.ts`](../packages/identity/anonymous-user-id/src/index.ts) | | `@deepseek-ai/dsh-app-boot` | — | [`packages/boot/app-boot/src/index.ts`](../packages/boot/app-boot/src/index.ts) | | `@deepseek-ai/dsh-atomic-write` | — | [`packages/util/atomic-write/src/index.ts`](../packages/util/atomic-write/src/index.ts) | | `@deepseek-ai/dsh-base` | — | [`packages/bundle/base/src/index.ts`](../packages/bundle/base/src/index.ts) | | `@deepseek-ai/dsh-brand` | — | [`packages/util/brand/src/index.ts`](../packages/util/brand/src/index.ts) | | `@deepseek-ai/dsh-chunked-list` | — | [`packages/util/chunked-list/src/index.ts`](../packages/util/chunked-list/src/index.ts) | | `@deepseek-ai/dsh-client-store` | — | [`packages/client/store/src/index.ts`](../packages/client/store/src/index.ts) | | `@deepseek-ai/dsh-client-test-runtime` | — | [`packages/test-support/client-runtime/src/index.ts`](../packages/test-support/client-runtime/src/index.ts) | | `@deepseek-ai/dsh-client-ui-dockkit` | — | [`packages/client/ui-dockkit/src/index.ts`](../packages/client/ui-dockkit/src/index.ts) | | `@deepseek-ai/dsh-client-ui-primitives` | — | [`packages/client/ui-primitives/src/index.ts`](../packages/client/ui-primitives/src/index.ts) | | `@deepseek-ai/dsh-client-ui-slots` | — | [`packages/client/ui-slots/src/index.ts`](../packages/client/ui-slots/src/index.ts) | | `@deepseek-ai/dsh-client-web` | — | [`packages/client/web/src/index.ts`](../packages/client/web/src/index.ts) | | `@deepseek-ai/dsh-cmdline` | — | [`packages/boot/cmdline/src/index.ts`](../packages/boot/cmdline/src/index.ts) | | `@deepseek-ai/dsh-deque` | — | [`packages/util/deque/src/index.ts`](../packages/util/deque/src/index.ts) | | `@deepseek-ai/dsh-experimental-agent-team-profile` | — | [`packages/experimental/agent-team-profile/src/index.ts`](../packages/experimental/agent-team-profile/src/index.ts) | | `@deepseek-ai/dsh-experimental-badge-skill-bundle` | — | [`packages/experimental/badge-skill-bundle/src/index.ts`](../packages/experimental/badge-skill-bundle/src/index.ts) | | `@deepseek-ai/dsh-experimental-browser-use-runtime` | — | [`packages/experimental/browser-use-runtime/src/index.ts`](../packages/experimental/browser-use-runtime/src/index.ts) | | `@deepseek-ai/dsh-experimental-cot-translation-bundle` | — | [`packages/experimental/cot-translation-bundle/src/index.ts`](../packages/experimental/cot-translation-bundle/src/index.ts) | | `@deepseek-ai/dsh-experimental-inspector-profile` | — | [`packages/experimental/inspector-profile/src/index.ts`](../packages/experimental/inspector-profile/src/index.ts) | | `@deepseek-ai/dsh-experimental-ralph-bundle` | — | [`packages/experimental/ralph-bundle/src/index.ts`](../packages/experimental/ralph-bundle/src/index.ts) | | `@deepseek-ai/dsh-experimental-session-search` | — | [`packages/experimental/session-search/src/index.ts`](../packages/experimental/session-search/src/index.ts) | | `@deepseek-ai/dsh-experimental-session-titles-bundle` | — | [`packages/experimental/session-titles-bundle/src/index.ts`](../packages/experimental/session-titles-bundle/src/index.ts) | | `@deepseek-ai/dsh-experimental-terminal-bundle` | — | [`packages/experimental/terminal-bundle/src/index.ts`](../packages/experimental/terminal-bundle/src/index.ts) | | `@deepseek-ai/dsh-experimental-voice-input-bundle` | — | [`packages/experimental/voice-input-bundle/src/index.ts`](../packages/experimental/voice-input-bundle/src/index.ts) | | `@deepseek-ai/dsh-experimental-webworker-packer` | — | [`packages/experimental/webworker-packer/src/index.ts`](../packages/experimental/webworker-packer/src/index.ts) | | `@deepseek-ai/dsh-experimental-webworker-runtime` | — | [`packages/experimental/webworker-runtime/src/index.ts`](../packages/experimental/webworker-runtime/src/index.ts) | | `@deepseek-ai/dsh-home-paths` | — | [`packages/util/home-paths/src/index.ts`](../packages/util/home-paths/src/index.ts) | | `@deepseek-ai/dsh-hook-protocol` | — | [`packages/experimental/hook-protocol/src/index.ts`](../packages/experimental/hook-protocol/src/index.ts) | | `@deepseek-ai/dsh-http-proxy` | — | [`packages/util/http-proxy/src/index.ts`](../packages/util/http-proxy/src/index.ts) | | `@deepseek-ai/dsh-launch-environment` | — | [`packages/util/launch-environment/src/index.ts`](../packages/util/launch-environment/src/index.ts) | | `@deepseek-ai/dsh-lazy-require` | — | [`packages/util/lazy-require/src/index.ts`](../packages/util/lazy-require/src/index.ts) | | `@deepseek-ai/dsh-llm-deepseek` | — | [`packages/llm/llm-deepseek/src/index.ts`](../packages/llm/llm-deepseek/src/index.ts) | | `@deepseek-ai/dsh-llm-mock-server` | — | [`packages/test-support/llm-mock-server/src/index.ts`](../packages/test-support/llm-mock-server/src/index.ts) | | `@deepseek-ai/dsh-loader-smoke` | — | [`packages/test-support/loader-smoke/src/index.ts`](../packages/test-support/loader-smoke/src/index.ts) | | `@deepseek-ai/dsh-native-command` | — | [`packages/util/native-command/src/index.ts`](../packages/util/native-command/src/index.ts) | | `@deepseek-ai/dsh-output-retention` | — | [`packages/util/output-retention/src/index.ts`](../packages/util/output-retention/src/index.ts) | | `@deepseek-ai/dsh-package-manifest` | — | [`packages/util/package-manifest/src/index.ts`](../packages/util/package-manifest/src/index.ts) | | `@deepseek-ai/dsh-remote-mock` | — | [`packages/test-support/remote-mock/src/index.ts`](../packages/test-support/remote-mock/src/index.ts) | | `@deepseek-ai/dsh-sandbox-windows-acl` | — | [`packages/sandbox/sandbox-windows-acl/src/index.ts`](../packages/sandbox/sandbox-windows-acl/src/index.ts) | | `@deepseek-ai/dsh-scope` | — | [`packages/core/scope/src/index.ts`](../packages/core/scope/src/index.ts) | | `@deepseek-ai/dsh-sdk-client` | — | [`packages/sdk/client/src/index.ts`](../packages/sdk/client/src/index.ts) | | `@deepseek-ai/dsh-sdk-minimal` | — | [`packages/bundle/sdk-minimal/src/index.ts`](../packages/bundle/sdk-minimal/src/index.ts) | | `@deepseek-ai/dsh-sdk-protocol` | — | [`packages/sdk/protocol/src/index.ts`](../packages/sdk/protocol/src/index.ts) | | `@deepseek-ai/dsh-session-format` | — | [`packages/session/session-format/src/index.ts`](../packages/session/session-format/src/index.ts) | | `@deepseek-ai/dsh-session-format-catalog` | — | [`packages/session/session-format-catalog/src/index.ts`](../packages/session/session-format-catalog/src/index.ts) | | `@deepseek-ai/dsh-session-format-v0-to-v1` | — | [`packages/session/session-format-v0-to-v1/src/index.ts`](../packages/session/session-format-v0-to-v1/src/index.ts) | | `@deepseek-ai/dsh-session-format-v1-to-v2` | — | [`packages/session/session-format-v1-to-v2/src/index.ts`](../packages/session/session-format-v1-to-v2/src/index.ts) | | `@deepseek-ai/dsh-session-format-v2-to-v3` | — | [`packages/session/session-format-v2-to-v3/src/index.ts`](../packages/session/session-format-v2-to-v3/src/index.ts) | | `@deepseek-ai/dsh-session-format-v3-to-v4` | — | [`packages/session/session-format-v3-to-v4/src/index.ts`](../packages/session/session-format-v3-to-v4/src/index.ts) | | `@deepseek-ai/dsh-session-snapshot` | — | [`packages/test-support/session-snapshot/src/index.ts`](../packages/test-support/session-snapshot/src/index.ts) | | `@deepseek-ai/dsh-session-telemetry` | — | [`packages/session/session-telemetry/src/index.ts`](../packages/session/session-telemetry/src/index.ts) | | `@deepseek-ai/dsh-session-title-llm` | — | [`packages/session/session-title-llm/src/index.ts`](../packages/session/session-title-llm/src/index.ts) | | `@deepseek-ai/dsh-ssh-helper-runtime` | — | [`packages/ssh/ssh-helper-runtime/src/index.ts`](../packages/ssh/ssh-helper-runtime/src/index.ts) | | `@deepseek-ai/dsh-timeout` | — | [`packages/util/timeout/src/index.ts`](../packages/util/timeout/src/index.ts) | | `@deepseek-ai/dsh-typert-generator` | — | [`packages/typert/generator/src/index.ts`](../packages/typert/generator/src/index.ts) | | `@deepseek-ai/dsh-typert-protocol` | — | [`packages/typert/protocol/src/index.ts`](../packages/typert/protocol/src/index.ts) | | `@deepseek-ai/dsh-typert-registry` | — | [`packages/typert/registry/src/index.ts`](../packages/typert/registry/src/index.ts) | | `@deepseek-ai/dsh-util-code-language` | — | [`packages/util/code-language/src/index.ts`](../packages/util/code-language/src/index.ts) | | `@deepseek-ai/dsh-util-crypto` | — | [`packages/util/crypto/src/index.ts`](../packages/util/crypto/src/index.ts) | | `@deepseek-ai/dsh-util-time` | — | [`packages/util/time/src/index.ts`](../packages/util/time/src/index.ts) | | `@deepseek-ai/dsh-util-values` | — | [`packages/util/values/src/index.ts`](../packages/util/values/src/index.ts) | | `@deepseek-ai/dsh-util-workspace-path` | — | [`packages/util/workspace-path/src/index.ts`](../packages/util/workspace-path/src/index.ts) | | `@deepseek-ai/dsh-win32-process` | — | [`packages/subprocess/win32-process/src/index.ts`](../packages/subprocess/win32-process/src/index.ts) |