# Encoding formats

Encoders are used to define formats into which raw sources should be encoded by
an output. Syntax for encoder is: `%encoder(parameters...)` or, if you use
default parameters, `%encoder`.

Please note that not all encoding formats are available at all time. Most of
them require optional dependencies. If a format is not available, you should see
an error like this:

```shell
Error 12: Unsupported encoder: %sine().
You must be missing an optional dependency.
```

In particular, due to limitations with static linking on windows, only the
`%ffmpeg` encoder is available with our windows build. However, this encoder provides
a lot of codecs and formats, and it is quite likely that it can provide what you need.

## Formats determine the stream content

In most liquidsoap scripts, the encoding format determines what
kind of data is streamed.

The type of an encoding format depends on its parameter.
For example, `%mp3` has type `format(audio=pcm(stereo))`.

The type of an output like `output.icecast`
or `output.file` is something like
`(...,format('a),...,source('a))->source('a)`.
This means that your source will have to have the same type as your format.

For example if you write

```liquidsoap
output.file(%mp3,"/tmp/foo.mp3",playlist("~/audio"))
```

then the playlist source will have to stream stereo audio.

In the case of audio format, liquidsoap tries its best to convert the format whenever
possible. For instance, in the above, liquidsoap will convert mono files
from the playlist to stereo files by duplicating the single audio channel
in a mono file. Likewise, if the encoder requires mono audio, it will compute
the mean of a stereo files.

# List of formats and their syntax

All parameters are optional, and the parenthesis are not needed
when no parameter is passed. In the following default values
are shown.
As a special case, the keywords `mono` and `stereo` can be used to indicate
the number of channels (whether is is passed as an integer or a boolean).

## MP3

Mp3 encoder comes in 3 flavors:

- `%mp3` or `%mp3.cbr`: Constant bitrate encoding
- `%mp3.vbr`: Variable bitrate, quality-based encoding.
- `%mp3.abr`: Average bitrate based encoding.

Parameters common to each flavor are:

- `stereo=true/false`, `mono=true/false`: Encode stereo or mono data (default: `stereo`).
- `stereo_mode`: One of: `"stereo"`, `"joint_stereo"` or `"default"` (default: `"default"`). Default means that the underlying library (`libmp3lame`) will pick the stereo mode based on compression ration and input channels.
- `samplerate=44100`: Encoded data samplerate (default: `44100`)
- `internal_quality=2`: Lame algorithms internal quality. A value between `0` and `9`, `0` being highest quality and `9` the worst (default: `2`).
- `id3v2=true`: Add an `id3v2` tag to encoded data (default: `false`).

Parameters for `%mp3` are:

- `bitrate`: Encoded data fixed bitrate

Parameters for `%mp3.vbr` are:

- `quality`: Quality of encoded data; ranges from `0` (highest quality) to `9` (worst quality).

Parameters for `%mp3.abr` are:

- `bitrate`: Average bitrate
- `min_bitrate`: Minimum bitrate
- `max_bitrate`: Maximum bitrate
- `hard_min`: Enforce minimal bitrate

Examples:

- Constant `128` kbps bitrate encoding: `%mp3(bitrate=128)`
- Variable bitrate with quality `6` and samplerate of `22050` Hz: `%mp3.vbr(quality=7,samplerate=22050)`
- Average bitrate with mean of `128` kbps, maximum bitrate `192` kbps and `id3v2` tags: `%mp3.abr(bitrate=128,max_bitrate=192,id3v2=true)`

Optionally, liquidsoap can insert a message within mp3 data. You can set its value using the `msg` parameter.
Setting it to `""` disables this feature. This is its default value.

## Shine

Shine is the fixed-point mp3 encoder. It is useful on architectures without a FPU, such as ARM.
It is named `%shine` or `%mp3.fxp` and its parameters are:

```liquidsoap
%shine(channels=2,samplerate=44100,bitrate=128)
```

## WAV

```liquidsoap
%wav(stereo=true, channels=2, samplesize=16, header=true, duration=10.)
```

If `header` is `false`, the encoder outputs raw PCM. `duration` is optional
and is used to set the WAV length header.

Because Liquidsoap encodes a possibly infinite stream, there
is no way to know in advance the duration of encoded data. Since WAV header
has to be written first, by default its length is set to the maximum possible
value. If you know the expected duration of the encoded data and you actually
care about the WAV length header then you should use this parameter.

## FFmpeg

See detailed [ffmpeg encoders](ffmpeg_encoder.html) article.

## Ogg

The following formats can be put together in an Ogg container.
The syntax for doing so is `%ogg(x,y,z)` but it is also
possible to just write `%vorbis(...)`, for example, instead
of `%ogg(%vorbis(...))`.

All ogg encoders have a `bytes_per_page` parameter, which can be used to
try to limit ogg logical pages size. For instance:

```liquidsoap
# Try to limit vorbis pages size to 1024 bytes
%vorbis(bytes_per_page=1024)
```

### Vorbis

```liquidsoap
# Variable bitrate
%vorbis(samplerate=44100, channels=2, quality=0.3)
% Average bitrate
%vorbis.abr(samplerate=44100, channels=2, bitrate=128, max_bitrate=192, min_bitrate=64)
# Constant bitrate
%vorbis.cbr(samplerate=44100, channels=2, bitrate=128)
```

Quality ranges from -0.2 to 1,
but quality -0.2 is only available with the aotuv implementation of libvorbis.

### Opus

Opus is a lossy audio compression made especially suitable for interactive real-time applications
over the Internet. Liquidsoap supports Opus data encapsulated into Ogg streams.

The encoder is named `%opus` and its parameters are as follows. Please refer
to the [Opus documentation](http://www.opus-codec.org/docs/) for information about
their meanings and values.

- `vbr`: one of `"none"`, `"constrained"` or `"unconstrained"`
- `application`: One of `"audio"`, `"voip"` or `"restricted_lowdelay"`
- `complexity`: Integer value between `0` and `10`.
- `max_bandwidth`: One of `"narrow_band"`, `"medium_band"`, `"wide_band"`, `"super_wide_band"` or `"full_band"`
- `samplerate`: input samplerate. Must be one of: `8000`, `12000`, `16000`, `24000` or `48000`
- `frame_size`: encoding frame size, in milliseconds. Must be one of: `2.5`, `5.`, `10.`, `20.`, `40.` or `60.`.
- `bitrate`: encoding bitrate, in `kbps`. Must be a value between `5` and `512`. You can also set it to `"auto"`.
- `channels`: currently, only `1` or `2` channels are allowed.
- `mono`, `stereo`: equivalent to `channels=1` and `channels=2`.
- `signal`: one of `"voice"` or `"music"`

### Theora

```liquidsoap
%theora(quality=40,width=640,height=480,
        picture_width=255,picture_height=255,
        picture_x=0, picture_y=0,
        aspect_numerator=1, aspect_denominator=1,
        keyframe_frequency=64, vp3_compatible=false,
        soft_target=false, buffer_delay=5,
        speed=0)
```

You can also pass `bitrate=x` explicitly instead of a quality.
The default dimensions are liquidsoap's default,
from the settings `frame.video.height/width`.

### Speex

```liquidsoap
%speex(stereo=false, samplerate=44100, quality=7,
       mode=wideband, # One of: wideband|narrowband|ultra-wideband
       frames_per_packet=1,
       complexity=5)
```

You can also control quality using `abr=x` or `vbr=y`.

### Flac

The flac encoding format comes in two flavors:

- `%flac` is the native flac format, useful for file output but not for streaming purpose
- `%ogg(%flac,...)` is the ogg/flac format, which can be used to broadcast data with icecast

The parameters are:

```liquidsoap
%flac(samplerate=44100,
      channels=2,
      compression=5,
      bits_per_sample=16)
```

`compression` ranges from 0 to 8 and `bits_per_sample` should be one of: `8`, `16`, `24` or `32`.
Please note that `32` bits per sample is currently not supported by the underlying `libflac`.

## FDK-AAC

This encoder can do both AAC and AAC+.

Its syntax is:

```liquidsoap
%fdkaac(channels=2, samplerate=44100, bandwidth="auto", bitrate=64, afterburner=false, aot="mpeg2_he_aac_v2", transmux="adts", sbr_mode=false)
```

Where `aot` is one of: `"mpeg4_aac_lc"`, `"mpeg4_he_aac"`, `"mpeg4_he_aac_v2"`,
`"mpeg4_aac_ld"`, `"mpeg4_aac_eld"`, `"mpeg2_aac_lc"`, `"mpeg2_he_aac"` or
`"mpeg2_he_aac_v2"`

`bandwidth` is one of: `"auto"`, any supported integer value.

`transmux` is one of: `"raw"`, `"adif"`, `"adts"`, `"latm"`, `"latm_out_of_band"` or `"loas"`.

Bitrate can be either constant by passing: `bitrate=64` or variable: `vbr=<1-5>`

You can consult the [Hydrogenaudio knowledge base](http://wiki.hydrogenaud.io/index.php?title=Fraunhofer_FDK_AAC) for more details
on configuration values and meanings.

## External encoders

For a detailed presentation of external encoders, see [this page](external_encoders.html).

```liquidsoap
%external(channels=2,samplerate=44100,header=true,
          restart_on_crash=false,
          restart_on_metadata,
          restart_after_delay=30,
          process="progname")
```

Only one of `restart_on_metadata` and `restart_after_delay` should
be passed. The delay is specified in seconds.
The encoding process is mandatory, and can also be passed directly
as a string, without `process=`.