// // Cmd.h // RTPrinterSDK // // Created by King 22/11/2017. // Copyright © 2017 Rongta. All rights reserved. // #import #import "TextSetting.h" #import "CommonSetting.h" #import #import "BitmapSetting.h" #import "BarcodeSetting.h" #import "EnumTypeDef.h" #define BUFFER_MAX_LEN (1024*5) #define BARCODECMD_MAX_LEN (200) /*! 所有命令类(Esc,TSC,cpcl,针打)的基类 The base class for all command classes (Esc, TSC, cpcl, and pin) */ @interface Cmd :NSObject /*!编码格式 Encoding Type*/ @property (nonatomic) EncodingType encodingType; /*!条形码结束后，要在打印几个结束符0x00, 默认为1 After the end of the bar code, to print a few end characters 0x00, the default is 1 */ @property (nonatomic) NSInteger barcodeBufferSize; @property (nonatomic, copy,readonly) NSString * _Nullable companyid; /*! *获取所有通过调用Append方法生成的指令 *Get all the instructions generated by calling the Append method @return NSData */ -(NSData *_Nullable) GetCmd; /*! *@brief 添加指令，到缓存中，以便最后调用GetCmd时，使用 * Add instructions to the cache for use in the last call to GetCmd @param bytes 要添加的指令 Instructions to be added @param len 指令长度 Instruction length */ -(void)Append:(Byte*)bytes len:(NSInteger)len; /*! * 添加指令，到缓存中，以便最后调用GetCmd时，使用 Add instructions to the cache for use in the last call to GetCmd @param data 指令数据 */ -(void)Append:(NSData *)data; /*! 把source的值赋值给dest，dest从index开始赋值，每赋一个字节index会加1 The value of the source assigned to dest, dest from the index assignment, each assigned a byte index will increase by one @param source 源数据 source data @param dest 目的数据 dest data @param index 当前索引 Current index */ -(void)MoveData:(NSData *)source dest:(Byte *)dest index:(NSInteger *)index; /*! 把source的值(从ibegin开始到,长度为len)赋值到dest，dest从index开始赋值，每赋一个字节index会加1 The source value (starting from ibegin to length len) assigned to dest, dest from the index assignment, each assigned a byte index will increase by 1 @param source 源数据 source data @param ibegin 开始索引 start index @param dest 目的数据 dest data @param dindex 当前索引 Current index */ -(void)MoveData:(Byte *)source ibegin:(NSInteger)ibegin len:(NSInteger) len dest:(Byte *)dest dindex:(NSInteger *)dindex; /*! 生成指定encodingType编码的数据 @discussion Generate data of the specified encodingType encoding @param data 要生成的数据 Data to be generated @return 返回指定encodingType编码的数据 Returns data of the specified encodingType encoding */ -(NSData *) ImportData:(nonnull NSString*) data; /*! 清除缓存数据 Clear the cache data */ -(void)Clear; /*!获取初始化命令头 Get initialization command header */ -(NSData *) GetHeaderCmd; /*!获取初始化命令头,并根据ComSetting设置相关参数 Get initialization command header, and set parameters according to ComSetting */ -(NSData *) GetHeaderCmd:(CommonSetting *_Nonnull)ComSetting; /*! 根据textSetting 得到对应的文本指令 By textSetting get the corresponding text instruction @param textSetting 文本设置 Text setting @param text 输入的文本 Enter the text @return 返回命令数据 Return command data */ -(NSData *) GetTextCmd:(TextSetting *)textSetting text:(NSString *)text; /*! 获取图片打印命令 Get the picture print order @param bitmapSetting 图片设置 image setting @param image image @return NSData */ -(NSData *) GetBitMapCmd:(BitmapSetting *) bitmapSetting image:(UIImage *) image; /*! 获取压缩图片打印命令（只有部分ESC指令的打印机机型支持）使用前请联系技术支持 Get the compressed picture print order (for esc command, only few printer support), if you want to use it please contact technical support first @param bitmapSetting 图片设置 image setting @param image image @return NSData */ -(NSData *) GetCompressedBitMapCmd:(BitmapSetting *) bitmapSetting image:(UIImage *) image; /*! 获取图片打印命令 (用于Esc命令，打印长图片时，并且用wifi,usb连接) 命令不分段 Get the picture print order(Used for the Esc command, when printing long images, and connected with wifi, usb) @param bitmapSetting 图片设置 image setting @param image image @return NSData */ -(NSData *) GetBitMapCmdExt:(BitmapSetting *) bitmapSetting image:(UIImage *) image; //图片如果小于limitWidth，会进行放大，limitmaxzooms:允许放大的最大倍数 0:不限制 -(NSData *) GetBitMapCmdZoom:(BitmapSetting *) bitmapSetting image:(UIImage *) image limitmaxzooms:(NSInteger)limitmaxzooms; /*! 获取条码指令 Get barcode instructions @param barcodeset 条码设置 Barcode settings @param codeType 条码类型 Barcode type @param scode 条码内容 Barcode content @param codeError 错误代码 error code @return NSData */ -(NSData *_Nullable) GetBarCodeCmd:(BarcodeSetting *_Nonnull)barcodeset codeType:(BarcodeType)codeType scode:(nonnull NSString * )scode codeError:(PrinterCodeError *_Nonnull)codeError; /*! 获取打印自测页的指令 Get instructions to print a self-test page @return NSData */ -(NSData *) GetSelftestCmd; /*! 获取打印回车的指令 Get print carriage return instruction @return NSData */ -(NSData *) GetCRCmd; /*! 获取换行的指令 Get line feed instruction @return NSData */ -(NSData *) GetLFCmd; /*! 获取回车换行的指令 Get the carriage return line feed instruction @return NSData */ -(NSData *_Nonnull) GetLFCRCmd; /*! 获取打印结束的指令（针打是退纸用，TSC,CPCL是发送打印命令，ESC:回车换行指令） Get the end of the print order (Pincmd is used for rewinding, TSC, CPCL is to send print commands, ESC: carriage return line feed command) @return NSData */ -(NSData *_Nullable) GetPrintEndCmd; /*! 获取打印结束的指令（针打是退纸用，TSC,CPCL是发送打印命令，ESC:回车换行指令） Get the end of the print order (Pincmd is used for rewinding, TSC, CPCL is to send print commands, ESC: carriage return line feed command) @param copies 打印份数(适用于TSC，其他调用等同于GetPrintEndCmd) Print copies (for TSC, other calls equal to GetPrintEndCmd) @return NSData */ -(NSData *_Nullable) GetPrintEndCmd:(NSInteger)copies; /*! 获取空的NSData Get empty NSData @return NSData */ -(NSData *_Nullable) GetNullData; ///*! // Expand memory // @param buff Memory to expand // @param Addsize 要扩展的尺寸 The size to be expanded // */ //-(BOOL)AddMemory:(Byte *)buff Addsize:(NSInteger)Addsize; /*!打开钱箱 Open the cashbox @param DrawerNumber 0:钱箱引脚2 (Drawer pin 2) 1:钱箱引脚5 (Drawer pin 5) default:0 @param pulseStartTime default:5 @param PulseEndTime default:0 */ - (NSData *) GetOpenDrawerCmd:(Byte)DrawerNumber startTime:(Byte)pulseStartTime endTime:(Byte)PulseEndTime; /*! 发出beep声 Beep sound @param level 次数 frequency @param interval 单次时间(single time) interval*100 ms */ - (NSData *) GetBeepCmd:(Byte)level interval:(Byte)interval; /*! 切纸控制命令 Paper cutting control command @param cutterMode 切刀模式 Cutter mode */ - (NSData *) GetCutPaperCmd:(CutterMode) cutterMode; /*! 选择切纸模式并切纸 (for ESC) Select the cut mode and cut the paper @param isFeed YES:部分切纸 Part cut paper NO:进纸, 并且进行部分切纸(保留一点不切) Feed, and cut some paper (keep a bit not cut) @param FeedDistance 进纸距离[n+0.125 毫米] Feed distance [n + 0.125 mm] */ - (NSData *) GetFeedAndCutPaperCmd:(BOOL)isFeed FeedDistance:(Byte)FeedDistance; /*!for RP410 ZPL Custom customer U.S.A CMC RP806 TSC Custom U.S.A MINI PACK */ - (NSData *) GetPrintStautsCmd:(PrintStautsCmd) printStautsCmd; /*!设置codepage set the codepage for ESC */ -(NSData *)GetCodePageCmd:(NSString *)codepage; /*!询问是否打印成功，成功能返回$80,失败不返回，适用于定制客户 Rpp80Use Ask if the print is successful, the function returns $80, failure does not return For custom customers Rpp80Use */ -(NSData *)GetAskPrintOkCmd; /*!设置起始X和Y轴 set the start X and Y axis */ - (NSData *)GetSetPointCmdByX:(int)x andY:(int)y; /*!设置黑标多走纸plus毫米 set the black label step more plus millimeter */ - (NSData *)GetBlackLabelPlusCmd:(int)plus; /*!设置黑标少走纸sub毫米 set the black label step less sub millimeter */ - (NSData *)GetBlackLabelSubCmd:(int)sub; // 容大打印机通用配置（不一定都适配） // Rongta Printer general configuration // 22-03-25 新增 // 自测页 + (NSData *)getSelfTestCmd; // 设置字符集 + (NSData *)getCharsetCmd:(int)charserCode; // 设置蓝牙 + (NSData *)getSetBleCmdWithDevType:(int)devType devName:(NSString *)devName pin:(NSString *)pin; // 自学习 + (NSData *)getSetLocationCmd; // 缺纸学习 + (NSData *)getLackPaperLearnCmd; // ip设置 + (NSData *)getSetIPCmdWithIP:(NSString *)ipStr mask:(NSString *)maskStr gate:(NSString *)gateStr port:(NSInteger )port; // DHCP + (NSData *)getDHCPCmdWithEnable:(BOOL)enable; // Wi-Fi + (NSData *)getWiFiCmdWithSSID:(NSString*)ssid key:(NSString*)key wifiType:(int)wifiType keyType:(int)keyType methodType:(int)methodType; // 蜂鸣器 + (NSData *)getBeepCmdWithEnable:(BOOL)enable; // 用户设置 —— 设置指令类型 0x00为标签指令，0x01为ESC/POS指令 + (NSData *)getPrinterCmdWithCmdType:(int)cmdType; // 用户设置 —— 设置纸张宽度 24 - 104 + (NSData *)getPaperWidthCmdWithWidth:(int)widht; // 用户设置 —— 恢复出厂设置 + (NSData *)getRestoreFactoryCmd; // 用户设置 —— 设置打印机参数 /* int printMode;//0x00 为热敏，0x01 为碳带 int powerOnLocation; //0x00 否 0x01 是 int labelHeight; //支持标签最大高度 int paperType; //0x00连续纸、0x01标签纸、0x02黑标纸 int reprintWhenErro; //0x00 否，0x01 是 int preventGluePaper; //预防粘纸,0x00 否，0x01 是 int specialPaper; //特殊标签,0x00 否，0x01 是 int speed; //速度设置 0-9 int quality; //打印质量设置 0-4 int darkness; //浓度设置 0-4 int hOrigin; //水平起始坐标 0-89 int vOrigin; //垂直起始坐标 0-89 int printToStop; //打印停止定位 负89-89 int preventGluePaperTime; //停止打印后，0-255分钟后启用防粘纸功能 */ + (NSData *)getSetPrinterParameterCmdWithPrintMode:(int)printMode powerOnLocation:(int)powerOnLocation labelHeight:(int)labelHeight paperType:(int)paperType reprintWhenErro:(int)reprintWhenErro preventGluePaper:(int)preventGluePaper specialPaper:(int)specialPaper speed:(int)speed // quality:(int)quality darkness:(int)darkness hOrigin:(int)hOrigin vOrigin:(int)vOrigin printToStop:(int)printToStop preventGluePaperTime:(int)preventGluePaperTime; // 固件升级 + (NSData *)getUpdateFirmwareCmdWithData:(NSData*)data; @end