/**
 * \file
 *
 * \brief AVR XMEGA Analog to Digital Converter driver
 *
 * Copyright (C) 2010-2012 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */

#include <compiler.h>
#include <adc.h>

/**
 * \ingroup adc_module_group
 * @{
 */

/** \name ADC interrupt callback function */
/** @{ */
#ifdef ADCA

/**
 * \internal
 * \brief ADC A enable counter
 *
 * This is used to ensure that ADC A is not inadvertently disabled when its
 * module or channel configurations are updated.
 */
static uint8_t adca_enable_count;

#  ifdef CONFIG_ADC_CALLBACK_ENABLE

/**
 * \internal
 * \brief ADC A interrupt callback function pointer
 */
adc_callback_t adca_callback;

#  endif
#endif

#ifdef ADCB

/**
 * \internal
 * \brief ADC B enable counter
 *
 * This is used to ensure that ADC B is not inadvertently disabled when its
 * module or channel configurations are updated.
 */
static uint8_t adcb_enable_count;

#  ifdef CONFIG_ADC_CALLBACK_ENABLE

/**
 * \internal
 * \brief ADC B interrupt callback function pointer
 */
adc_callback_t adcb_callback;

#  endif
#endif

#if defined(CONFIG_ADC_CALLBACK_ENABLE) || defined(__DOXYGEN__)

/**
 * \brief Set ADC interrupt callback function
 *
 * Sets a new callback function for interrupts on the specified ADC.
 *
 * \param adc Pointer to ADC module.
 * \param callback Pointer to the callback function to set.
 */
void adc_set_callback(ADC_t * adc,
    adc_callback_t callback)
{
    irqflags_t flags;

    Assert(callback);

    flags = cpu_irq_save();

#ifdef ADCA
    if ((uintptr_t) adc == (uintptr_t) & ADCA) {
        adca_callback = callback;
    } else
#endif

#ifdef ADCB
    if ((uintptr_t) adc == (uintptr_t) & ADCB) {
        adcb_callback = callback;
    } else
#endif

    {
        Assert(0);
    }

    cpu_irq_restore(flags);
}

#endif /* CONFIG_ADC_CALLBACK_ENABLE */

/** @} */

/** \name Internal functions for driver */
/** @{ */

/**
 * \internal
 * \brief Enable peripheral clock for ADC
 *
 * Checks if the enable count for the ADC is zero, then increments it. If the
 * count was zero, the peripheral clock is enabled. Otherwise, it is already
 * enabled.
 *
 * \param adc Pointer to ADC module.
 */
void adc_enable_clock(ADC_t * adc);

void adc_enable_clock(ADC_t * adc)
{
#ifdef ADCA
    if ((uintptr_t) adc == (uintptr_t) (&ADCA)) {
        Assert(adca_enable_count < 0xff);
        if (!adca_enable_count++) {
            sysclk_enable_module(SYSCLK_PORT_A, SYSCLK_ADC);
        }
    } else
#endif

#ifdef ADCB
    if ((uintptr_t) adc == (uintptr_t) (&ADCB)) {
        Assert(adcb_enable_count < 0xff);
        if (!adcb_enable_count++) {
            sysclk_enable_module(SYSCLK_PORT_B, SYSCLK_ADC);
        }
    } else
#endif

    {
        Assert(0);
    }
}

/**
 * \internal
 * \brief Disable peripheral clock for ADC
 *
 * Decrements the enable count for the ADC, then disables its peripheral clock
 * if the count hit zero. If the count did not hit zero, it indicates the ADC is
 * enabled.
 *
 * \param adc Pointer to ADC module
 */
void adc_disable_clock(ADC_t * adc);

void adc_disable_clock(ADC_t * adc)
{
#ifdef ADCA
    if ((uintptr_t) adc == (uintptr_t) (&ADCA)) {
        Assert(adca_enable_count);
        if (!--adca_enable_count) {
            sysclk_disable_module(SYSCLK_PORT_A, SYSCLK_ADC);
        }
    } else
#endif

#ifdef ADCB
    if ((uintptr_t) adc == (uintptr_t) (&ADCB)) {
        Assert(adcb_enable_count);
        if (!--adcb_enable_count) {
            sysclk_disable_module(SYSCLK_PORT_B, SYSCLK_ADC);
        }
    } else
#endif

    {
        Assert(0);
    }
}

/** @} */

/** \name ADC module management */
/** @{ */

/**
 * \brief Enable ADC
 *
 * Enables the ADC and locks IDLE mode for the sleep manager.
 *
 * \param adc Pointer to ADC module
 *
 * \note To ensure accurate conversions, please wait for at least
 * the specified start-up time between enabling the ADC module, and starting
 * a conversion. For most XMEGA devices the start-up time is specified
 * to be a maximum of 24 ADC clock cycles. Please verify the start-up time for
 * the device in use.
 */
void adc_enable(ADC_t * adc)
{
    irqflags_t flags = cpu_irq_save();
    adc_enable_clock(adc);
    adc->CTRLA |= ADC_ENABLE_bm;
    cpu_irq_restore(flags);

    sleepmgr_lock_mode(SLEEPMGR_IDLE);
}

/**
 * \brief Disable ADC
 *
 * Disables the ADC and unlocks IDLE mode for the sleep manager.
 *
 * \param adc Pointer to ADC module
 */
void adc_disable(ADC_t * adc)
{
    irqflags_t flags = cpu_irq_save();
    adc->CTRLA &= ~ADC_ENABLE_bm;
    adc_disable_clock(adc);
    cpu_irq_restore(flags);

    sleepmgr_unlock_mode(SLEEPMGR_IDLE);
}

/**
 * \brief Check if the ADC is enabled
 *
 * \param adc Pointer to ADC module.
 *
 * \retval true if ADC is enabled.
 * \retval false if ADC is disabled.
 */
bool adc_is_enabled(ADC_t * adc)
{
    /* It is sufficient to return the state of the ADC enable counters
     * since all driver functions that change the counts are protected
     * against interrupts and only the enable/disable functions leave the
     * counts incremented/decremented upon return.
     */
#ifdef ADCA
    if ((uintptr_t) adc == (uintptr_t) & ADCA) {
        return adca_enable_count;
    } else
#endif

#ifdef ADCB
    if ((uintptr_t) adc == (uintptr_t) & ADCB) {
        return adcb_enable_count;
    } else
#endif

    {
        Assert(0);
        return false;
    }
}

/** @} */

/** @} */