// Type definitions for validator.js v4.5.1
// Project: https://github.com/chriso/validator.js
// Definitions by: tgfjt <https://github.com/tgfjt>, Ilya Mochalov <https://github.com/chrootsu>
// Definitions: https://github.com/DefinitelyTyped/DefinitelyTyped

declare namespace ValidatorJS {
  interface ValidatorStatic {

    /* ************
     * Validators *
     **************/

    // check if the string contains the seed.
    contains(str: string, elem: any): boolean;

    // check if the string matches the comparison.
    equals(str: string, comparison: any): boolean;

    // check if the string is a date that's after the specified date (defaults to now).
    isAfter(str: string, date?: Date): boolean;

    // check if the string contains only letters (a-zA-Z).
    isAlpha(str: string): boolean;

    // check if the string contains only letters and numbers.
    isAlphanumeric(str: string): boolean;

    // check if the string contains ASCII chars only.
    isAscii(str: string): boolean;

    // check if a string is base64 encoded.
    isBase64(str: string): boolean;

    // check if the string is a date that's before the specified date.
    isBefore(str: string, date?: Date): boolean;

    // check if a string is a boolean.
    isBoolean(str: string): boolean;

    // check if the string's length (in bytes) falls in a range.
    isByteLength(str: string, options: IsByteLengthOptions): boolean;
    isByteLength(str: string, min: number, max?: number): boolean;

    // check if the string is a credit card.
    isCreditCard(str: string): boolean;

    // check if the string is a valid currency amount.
    isCurrency(str: string, options?: IsCurrencyOptions): boolean;

    // check if the string is a date.
    isDate(str: string): boolean;

    // check if the string represents a decimal number, such as 0.1, .3, 1.1, 1.00003, 4.0, etc.
    isDecimal(str: string): boolean;

    // check if the string is a number that's divisible by another.
    isDivisibleBy(str: string, number: number): boolean;

    // check if the string is an email.
    isEmail(str: string, options?: IsEmailOptions): boolean;

    // check if the string is a fully qualified domain name (e.g. domain.com).
    isFQDN(str: string, options?: IsFQDNOptions): boolean;

    // check if the string is a float.
    isFloat(str: string, options?: IsFloatOptions): boolean;

    // check if the string contains any full-width chars.
    isFullWidth(str: string): boolean;

    // check if the string contains any half-width chars.
    isHalfWidth(str: string): boolean;

    // check if the string is a hexadecimal color.
    isHexColor(str: string): boolean;

    // check if the string is a hexadecimal number.
    isHexadecimal(str: string): boolean;

    // check if the string is an IP (version 4 or 6).
    isIP(str: string, version?: number): boolean;

    // check if the string is an ISBN (version 10 or 13).
    isISBN(str: string, version?: number): boolean;

    // check if the string is an ISIN (https://en.wikipedia.org/wiki/International_Securities_Identification_Number)
    // (stock/security identifier).
    isISIN(str: string): boolean;

    // check if the string is a valid ISO 8601 (https://en.wikipedia.org/wiki/ISO_8601) date.
    isISO8601(str: string): boolean;

    // check if the string is in a array of allowed values.
    isIn(str: string, values: any[]): boolean;

    // check if the string is an integer.
    isInt(str: string, options?: IsIntOptions): boolean;

    // check if the string is valid JSON (note: uses JSON.parse).
    isJSON(str: string): boolean;

    // check if the string's length falls in a range.
    // Note: this function takes into account surrogate pairs.
    isLength(str: string, options: IsLengthOptions): boolean;
    isLength(str: string, min: number, max?: number): boolean;

    // check if the string is lowercase.
    isLowercase(str: string): boolean;

    // check if the string is a MAC address.
    isMACAddress(str: string): boolean;

    // check if the string is a mobile phone number, (locale is one of ['zh-CN', 'zh-TW', 'en-ZA', 'en-AU', 'en-HK',
    // 'pt-PT', 'fr-FR', 'el-GR', 'en-GB', 'en-US', 'en-ZM', 'ru-RU', 'nb-NO', 'nn-NO', 'vi-VN', 'en-NZ', 'en-IN']).
    isMobilePhone(str: string, locale: string): boolean;

    // check if the string is a valid hex-encoded representation of a MongoDB ObjectId
    // (http://docs.mongodb.org/manual/reference/object-id/).
    isMongoId(str: string): boolean;

    // check if the string contains one or more multibyte chars.
    isMultibyte(str: string): boolean;

    // check if the string is null.
    isNull(str: string): boolean;

    // check if the string contains only numbers.
    isNumeric(str: string): boolean;

    // check if the string contains any surrogate pairs chars.
    isSurrogatePair(str: string): boolean;

    // check if the string is an URL.
    isURL(str: string, options?: IsURLOptions): boolean;

    // check if the string is a UUID (version 3, 4 or 5).
    isUUID(str: string, version?: number): boolean;

    // check if the string is uppercase.
    isUppercase(str: string): boolean;

    // check if the string contains a mixture of full and half-width chars.
    isVariableWidth(str: string): boolean;

    // checks characters if they appear in the whitelist.
    isWhitelisted(str: string, chars: string|string[]): boolean;

    // check if string matches the pattern.
    matches(str: string, pattern: any, modifiers?: string): boolean;

    /**************
     * Sanitizers *
     **************/

    // remove characters that appear in the blacklist. The characters are used in a RegExp and so you will need
    // to escape some chars, e.g. blacklist(input, '\\[\\]').
    blacklist(input: string, chars: string): string;

    // replace <, >, &, ', " and / with HTML entities.
    escape(input: string): string;

    // trim characters from the left-side of the input.
    ltrim(input: any, chars?: string): string;

    // canonicalize an email address.
    normalizeEmail(email: string, options?: NormalizeEmailOptions): string;

    // trim characters from the right-side of the input.
    rtrim(input: any, chars?: string): string;

    // remove characters with a numerical value < 32 and 127, mostly control characters. If keep_new_lines is true,
    // newline characters are preserved (\n and \r, hex 0xA and 0xD). Unicode-safe in JavaScript.
    stripLow(input: string, keep_new_lines?: boolean): string;

    // convert the input to a boolean. Everything except for '0', 'false' and '' returns true. In strict mode only '1'
    // and 'true' return true.
    toBoolean(input: any, strict?: boolean): boolean;

    // convert the input to a date, or null if the input is not a date.
    toDate(input: any): Date; // Date or null

    // convert the input to a float, or NaN if the input is not a float.
    toFloat(input: any): number; // number or NaN

    // convert the input to an integer, or NaN if the input is not an integer.
    toInt(input: any, radix?: number): number; // number or NaN

    // convert the input to a string.
    toString(input: any): string;

    // trim characters (whitespace by default) from both sides of the input.
    trim(input: any, chars?: string): string;

    // remove characters that do not appear in the whitelist. The characters are used in a RegExp and so you will
    // need to escape some chars, e.g. whitelist(input, '\\[\\]').
    whitelist(input: string, chars: string): string;

    /**************
     * Extensions *
     **************/

    // add your own validators.
    // Note: that the first argument will be automatically coerced to a string.
    extend<T extends Function>(name: string, fn: T): void;
  }

  // options for IsByteLength
  interface IsByteLengthOptions {
    min?: number;
    max?: number;
  }

  // options for IsCurrency
  interface IsCurrencyOptions {
    symbol?: string;
    require_symbol?: boolean;
    allow_space_after_symbol?: boolean;
    symbol_after_digits?: boolean;
    allow_negatives?: boolean;
    parens_for_negatives?: boolean;
    negative_sign_before_digits?: boolean;
    negative_sign_after_digits?: boolean;
    allow_negative_sign_placeholder?: boolean;
    thousands_separator?: string;
    decimal_separator?: string;
    allow_space_after_digits?: boolean;
  }

  // options for isEmail
  interface IsEmailOptions {
    allow_display_name?: boolean;
    allow_utf8_local_part?: boolean;
    require_tld?: boolean;
  }

  // options for isFQDN
  interface IsFQDNOptions {
    require_tld?: boolean;
    allow_underscores?: boolean;
    allow_trailing_dot?: boolean;
  }

  // options for IsFloat
  interface IsFloatOptions {
    min?: number;
    max?: number;
  }

  // options for IsInt
  interface IsIntOptions {
    min?: number;
    max?: number;
  }

  // options for IsLength
  interface IsLengthOptions {
    min?: number;
    max?: number;
  }

  // options for isURL
  interface IsURLOptions {
    protocols?: string[];
    require_tld?: boolean;
    require_protocol?: boolean;
    require_valid_protocol?: boolean;
    allow_underscores?: boolean;
    host_whitelist?: boolean;
    host_blacklist?: boolean;
    allow_trailing_dot?: boolean;
    allow_protocol_relative_urls?: boolean;
  }

  // options for normalizeEmail
  interface NormalizeEmailOptions {
    lowercase?: boolean;
    remove_dots?: boolean;
    remove_extension?: boolean;
  }
}

declare module "validator" {
  let validator: ValidatorJS.ValidatorStatic;
  namespace validator {}
  export = validator;
}

// deprecated interfaces for backward compatibility, please use ValidatorJS.* instead the ones
interface IValidatorStatic extends ValidatorJS.ValidatorStatic {}
interface IURLoptions extends ValidatorJS.IsURLOptions {}
interface IFQDNoptions extends ValidatorJS.IsFQDNOptions {}
interface IEmailoptions extends ValidatorJS.NormalizeEmailOptions {}