import { z } from 'zod';
/**
 * 中继差频方向
 */
export declare const RepeaterShiftSchema: z.ZodEnum<["none", "minus", "plus"]>;
/**
 * 哑音类型
 */
export declare const ToneSquelchModeSchema: z.ZodEnum<["none", "ctcss", "dcs"]>;
/**
 * 预设频率Schema
 */
export declare const PresetFrequencySchema: z.ZodEffects<z.ZodObject<{
    band: z.ZodString;
    mode: z.ZodString;
    radioMode: z.ZodOptional<z.ZodString>;
    frequency: z.ZodNumber;
    description: z.ZodOptional<z.ZodString>;
    repeaterShift: z.ZodOptional<z.ZodEnum<["none", "minus", "plus"]>>;
    repeaterOffsetHz: z.ZodOptional<z.ZodNumber>;
    toneMode: z.ZodOptional<z.ZodEnum<["none", "ctcss", "dcs"]>>;
    ctcssToneTenthsHz: z.ZodOptional<z.ZodNumber>;
    dcsCode: z.ZodOptional<z.ZodNumber>;
}, "strip", z.ZodTypeAny, {
    mode: string;
    frequency: number;
    band: string;
    radioMode?: string | undefined;
    description?: string | undefined;
    repeaterShift?: "none" | "minus" | "plus" | undefined;
    repeaterOffsetHz?: number | undefined;
    toneMode?: "none" | "ctcss" | "dcs" | undefined;
    ctcssToneTenthsHz?: number | undefined;
    dcsCode?: number | undefined;
}, {
    mode: string;
    frequency: number;
    band: string;
    radioMode?: string | undefined;
    description?: string | undefined;
    repeaterShift?: "none" | "minus" | "plus" | undefined;
    repeaterOffsetHz?: number | undefined;
    toneMode?: "none" | "ctcss" | "dcs" | undefined;
    ctcssToneTenthsHz?: number | undefined;
    dcsCode?: number | undefined;
}>, {
    mode: string;
    frequency: number;
    band: string;
    radioMode?: string | undefined;
    description?: string | undefined;
    repeaterShift?: "none" | "minus" | "plus" | undefined;
    repeaterOffsetHz?: number | undefined;
    toneMode?: "none" | "ctcss" | "dcs" | undefined;
    ctcssToneTenthsHz?: number | undefined;
    dcsCode?: number | undefined;
}, {
    mode: string;
    frequency: number;
    band: string;
    radioMode?: string | undefined;
    description?: string | undefined;
    repeaterShift?: "none" | "minus" | "plus" | undefined;
    repeaterOffsetHz?: number | undefined;
    toneMode?: "none" | "ctcss" | "dcs" | undefined;
    ctcssToneTenthsHz?: number | undefined;
    dcsCode?: number | undefined;
}>;
/**
 * 频率列表响应Schema
 */
export declare const FrequencyListResponseSchema: z.ZodObject<{
    success: z.ZodBoolean;
    presets: z.ZodArray<z.ZodEffects<z.ZodObject<{
        band: z.ZodString;
        mode: z.ZodString;
        radioMode: z.ZodOptional<z.ZodString>;
        frequency: z.ZodNumber;
        description: z.ZodOptional<z.ZodString>;
        repeaterShift: z.ZodOptional<z.ZodEnum<["none", "minus", "plus"]>>;
        repeaterOffsetHz: z.ZodOptional<z.ZodNumber>;
        toneMode: z.ZodOptional<z.ZodEnum<["none", "ctcss", "dcs"]>>;
        ctcssToneTenthsHz: z.ZodOptional<z.ZodNumber>;
        dcsCode: z.ZodOptional<z.ZodNumber>;
    }, "strip", z.ZodTypeAny, {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }, {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }>, {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }, {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }>, "many">;
}, "strip", z.ZodTypeAny, {
    success: boolean;
    presets: {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }[];
}, {
    success: boolean;
    presets: {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }[];
}>;
/**
 * 串口配置参数Schema
 */
export declare const SerialConfigSchema: z.ZodObject<{
    data_bits: z.ZodOptional<z.ZodEnum<["5", "6", "7", "8"]>>;
    stop_bits: z.ZodOptional<z.ZodEnum<["1", "2"]>>;
    serial_parity: z.ZodOptional<z.ZodEnum<["None", "Even", "Odd", "Mark", "Space"]>>;
    serial_handshake: z.ZodOptional<z.ZodEnum<["None", "Hardware", "Software"]>>;
    rts_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
    dtr_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
    rate: z.ZodOptional<z.ZodNumber>;
    timeout: z.ZodOptional<z.ZodNumber>;
    retry: z.ZodOptional<z.ZodNumber>;
    write_delay: z.ZodOptional<z.ZodNumber>;
    post_write_delay: z.ZodOptional<z.ZodNumber>;
}, "strip", z.ZodTypeAny, {
    data_bits?: "5" | "6" | "7" | "8" | undefined;
    stop_bits?: "1" | "2" | undefined;
    serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
    serial_handshake?: "None" | "Hardware" | "Software" | undefined;
    rts_state?: "ON" | "OFF" | "UNSET" | undefined;
    dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
    rate?: number | undefined;
    timeout?: number | undefined;
    retry?: number | undefined;
    write_delay?: number | undefined;
    post_write_delay?: number | undefined;
}, {
    data_bits?: "5" | "6" | "7" | "8" | undefined;
    stop_bits?: "1" | "2" | undefined;
    serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
    serial_handshake?: "None" | "Hardware" | "Software" | undefined;
    rts_state?: "ON" | "OFF" | "UNSET" | undefined;
    dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
    rate?: number | undefined;
    timeout?: number | undefined;
    retry?: number | undefined;
    write_delay?: number | undefined;
    post_write_delay?: number | undefined;
}>;
export declare const HamlibBackendConfigSchema: z.ZodRecord<z.ZodString, z.ZodString>;
export declare const HamlibConfigFieldTypeSchema: z.ZodEnum<["string", "combo", "numeric", "checkbutton", "button", "binary", "int", "unknown"]>;
export declare const HamlibConfigFieldSchema: z.ZodObject<{
    token: z.ZodNumber;
    name: z.ZodString;
    label: z.ZodString;
    tooltip: z.ZodString;
    defaultValue: z.ZodString;
    effectiveDefaultValue: z.ZodOptional<z.ZodString>;
    effectiveDefaultSource: z.ZodOptional<z.ZodEnum<["hamlib-schema", "rig-caps"]>>;
    type: z.ZodEnum<["string", "combo", "numeric", "checkbutton", "button", "binary", "int", "unknown"]>;
    numeric: z.ZodOptional<z.ZodObject<{
        min: z.ZodNumber;
        max: z.ZodNumber;
        step: z.ZodNumber;
    }, "strip", z.ZodTypeAny, {
        min: number;
        max: number;
        step: number;
    }, {
        min: number;
        max: number;
        step: number;
    }>>;
    options: z.ZodOptional<z.ZodArray<z.ZodString, "many">>;
}, "strip", z.ZodTypeAny, {
    type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
    name: string;
    label: string;
    token: number;
    tooltip: string;
    defaultValue: string;
    options?: string[] | undefined;
    numeric?: {
        min: number;
        max: number;
        step: number;
    } | undefined;
    effectiveDefaultValue?: string | undefined;
    effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
}, {
    type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
    name: string;
    label: string;
    token: number;
    tooltip: string;
    defaultValue: string;
    options?: string[] | undefined;
    numeric?: {
        min: number;
        max: number;
        step: number;
    } | undefined;
    effectiveDefaultValue?: string | undefined;
    effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
}>;
export declare const RigEndpointKindSchema: z.ZodEnum<["serial-port", "network-address", "device-path"]>;
/**
 * 网络 RigCtld 连接配置Schema
 */
export declare const NetworkConfigSchema: z.ZodObject<{
    host: z.ZodString;
    port: z.ZodNumber;
}, "strip", z.ZodTypeAny, {
    host: string;
    port: number;
}, {
    host: string;
    port: number;
}>;
/**
 * ICOM WLAN 连接配置Schema
 */
export declare const IcomWlanConfigSchema: z.ZodObject<{
    ip: z.ZodString;
    port: z.ZodNumber;
    userName: z.ZodOptional<z.ZodString>;
    password: z.ZodOptional<z.ZodString>;
    /**
     * 数据模式（Data Mode）
     * 启用时使用 USB-D 等数字模式，适用于 FT8/FT4 等数字通信
     * 默认值: true
     */
    dataMode: z.ZodDefault<z.ZodOptional<z.ZodBoolean>>;
}, "strip", z.ZodTypeAny, {
    ip: string;
    port: number;
    dataMode: boolean;
    userName?: string | undefined;
    password?: string | undefined;
}, {
    ip: string;
    port: number;
    userName?: string | undefined;
    password?: string | undefined;
    dataMode?: boolean | undefined;
}>;
/**
 * 串口连接配置Schema
 */
export declare const SerialConnectionConfigSchema: z.ZodObject<{
    path: z.ZodString;
    rigModel: z.ZodNumber;
    serialConfig: z.ZodOptional<z.ZodObject<{
        data_bits: z.ZodOptional<z.ZodEnum<["5", "6", "7", "8"]>>;
        stop_bits: z.ZodOptional<z.ZodEnum<["1", "2"]>>;
        serial_parity: z.ZodOptional<z.ZodEnum<["None", "Even", "Odd", "Mark", "Space"]>>;
        serial_handshake: z.ZodOptional<z.ZodEnum<["None", "Hardware", "Software"]>>;
        rts_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
        dtr_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
        rate: z.ZodOptional<z.ZodNumber>;
        timeout: z.ZodOptional<z.ZodNumber>;
        retry: z.ZodOptional<z.ZodNumber>;
        write_delay: z.ZodOptional<z.ZodNumber>;
        post_write_delay: z.ZodOptional<z.ZodNumber>;
    }, "strip", z.ZodTypeAny, {
        data_bits?: "5" | "6" | "7" | "8" | undefined;
        stop_bits?: "1" | "2" | undefined;
        serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
        serial_handshake?: "None" | "Hardware" | "Software" | undefined;
        rts_state?: "ON" | "OFF" | "UNSET" | undefined;
        dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
        rate?: number | undefined;
        timeout?: number | undefined;
        retry?: number | undefined;
        write_delay?: number | undefined;
        post_write_delay?: number | undefined;
    }, {
        data_bits?: "5" | "6" | "7" | "8" | undefined;
        stop_bits?: "1" | "2" | undefined;
        serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
        serial_handshake?: "None" | "Hardware" | "Software" | undefined;
        rts_state?: "ON" | "OFF" | "UNSET" | undefined;
        dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
        rate?: number | undefined;
        timeout?: number | undefined;
        retry?: number | undefined;
        write_delay?: number | undefined;
        post_write_delay?: number | undefined;
    }>>;
    backendConfig: z.ZodOptional<z.ZodRecord<z.ZodString, z.ZodString>>;
}, "strip", z.ZodTypeAny, {
    path: string;
    rigModel: number;
    serialConfig?: {
        data_bits?: "5" | "6" | "7" | "8" | undefined;
        stop_bits?: "1" | "2" | undefined;
        serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
        serial_handshake?: "None" | "Hardware" | "Software" | undefined;
        rts_state?: "ON" | "OFF" | "UNSET" | undefined;
        dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
        rate?: number | undefined;
        timeout?: number | undefined;
        retry?: number | undefined;
        write_delay?: number | undefined;
        post_write_delay?: number | undefined;
    } | undefined;
    backendConfig?: Record<string, string> | undefined;
}, {
    path: string;
    rigModel: number;
    serialConfig?: {
        data_bits?: "5" | "6" | "7" | "8" | undefined;
        stop_bits?: "1" | "2" | undefined;
        serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
        serial_handshake?: "None" | "Hardware" | "Software" | undefined;
        rts_state?: "ON" | "OFF" | "UNSET" | undefined;
        dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
        rate?: number | undefined;
        timeout?: number | undefined;
        retry?: number | undefined;
        write_delay?: number | undefined;
        post_write_delay?: number | undefined;
    } | undefined;
    backendConfig?: Record<string, string> | undefined;
}>;
export declare const HamlibSpectrumConfigSchema: z.ZodObject<{
    speed: z.ZodOptional<z.ZodNumber>;
}, "strip", z.ZodTypeAny, {
    speed?: number | undefined;
}, {
    speed?: number | undefined;
}>;
/**
 * PTT (Push-to-Talk) 方法Schema
 *
 * - cat: 通过 CAT 命令控制 PTT（Hamlib RIG 类型，推荐）
 * - vox: 不主动控制 PTT，电台通过检测音频信号自动发射（适用于 SignaLink USB 等）
 * - dtr: 通过 RS-232 DTR 引脚控制 PTT（适用于古老电台或外部功放）
 * - rts: 通过 RS-232 RTS 引脚控制 PTT（适用于古老电台或外部功放）
 */
export declare const PttMethodSchema: z.ZodEnum<["cat", "vox", "dtr", "rts"]>;
/**
 * Hamlib配置Schema - 嵌套对象结构
 *
 * 设计理念：
 * - type: 当前使用的连接类型
 * - network/icomWlan/serial: 各连接类型的独立配置对象
 * - 所有配置对象共存，切换连接类型时保留历史配置
 * - 根据 type 字段读取对应的配置对象
 */
export declare const HamlibConfigSchema: z.ZodObject<{
    type: z.ZodEnum<["none", "network", "serial", "icom-wlan"]>;
    network: z.ZodOptional<z.ZodObject<{
        host: z.ZodString;
        port: z.ZodNumber;
    }, "strip", z.ZodTypeAny, {
        host: string;
        port: number;
    }, {
        host: string;
        port: number;
    }>>;
    icomWlan: z.ZodOptional<z.ZodObject<{
        ip: z.ZodString;
        port: z.ZodNumber;
        userName: z.ZodOptional<z.ZodString>;
        password: z.ZodOptional<z.ZodString>;
        /**
         * 数据模式（Data Mode）
         * 启用时使用 USB-D 等数字模式，适用于 FT8/FT4 等数字通信
         * 默认值: true
         */
        dataMode: z.ZodDefault<z.ZodOptional<z.ZodBoolean>>;
    }, "strip", z.ZodTypeAny, {
        ip: string;
        port: number;
        dataMode: boolean;
        userName?: string | undefined;
        password?: string | undefined;
    }, {
        ip: string;
        port: number;
        userName?: string | undefined;
        password?: string | undefined;
        dataMode?: boolean | undefined;
    }>>;
    serial: z.ZodOptional<z.ZodObject<{
        path: z.ZodString;
        rigModel: z.ZodNumber;
        serialConfig: z.ZodOptional<z.ZodObject<{
            data_bits: z.ZodOptional<z.ZodEnum<["5", "6", "7", "8"]>>;
            stop_bits: z.ZodOptional<z.ZodEnum<["1", "2"]>>;
            serial_parity: z.ZodOptional<z.ZodEnum<["None", "Even", "Odd", "Mark", "Space"]>>;
            serial_handshake: z.ZodOptional<z.ZodEnum<["None", "Hardware", "Software"]>>;
            rts_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
            dtr_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
            rate: z.ZodOptional<z.ZodNumber>;
            timeout: z.ZodOptional<z.ZodNumber>;
            retry: z.ZodOptional<z.ZodNumber>;
            write_delay: z.ZodOptional<z.ZodNumber>;
            post_write_delay: z.ZodOptional<z.ZodNumber>;
        }, "strip", z.ZodTypeAny, {
            data_bits?: "5" | "6" | "7" | "8" | undefined;
            stop_bits?: "1" | "2" | undefined;
            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
            rate?: number | undefined;
            timeout?: number | undefined;
            retry?: number | undefined;
            write_delay?: number | undefined;
            post_write_delay?: number | undefined;
        }, {
            data_bits?: "5" | "6" | "7" | "8" | undefined;
            stop_bits?: "1" | "2" | undefined;
            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
            rate?: number | undefined;
            timeout?: number | undefined;
            retry?: number | undefined;
            write_delay?: number | undefined;
            post_write_delay?: number | undefined;
        }>>;
        backendConfig: z.ZodOptional<z.ZodRecord<z.ZodString, z.ZodString>>;
    }, "strip", z.ZodTypeAny, {
        path: string;
        rigModel: number;
        serialConfig?: {
            data_bits?: "5" | "6" | "7" | "8" | undefined;
            stop_bits?: "1" | "2" | undefined;
            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
            rate?: number | undefined;
            timeout?: number | undefined;
            retry?: number | undefined;
            write_delay?: number | undefined;
            post_write_delay?: number | undefined;
        } | undefined;
        backendConfig?: Record<string, string> | undefined;
    }, {
        path: string;
        rigModel: number;
        serialConfig?: {
            data_bits?: "5" | "6" | "7" | "8" | undefined;
            stop_bits?: "1" | "2" | undefined;
            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
            rate?: number | undefined;
            timeout?: number | undefined;
            retry?: number | undefined;
            write_delay?: number | undefined;
            post_write_delay?: number | undefined;
        } | undefined;
        backendConfig?: Record<string, string> | undefined;
    }>>;
    spectrum: z.ZodOptional<z.ZodObject<{
        speed: z.ZodOptional<z.ZodNumber>;
    }, "strip", z.ZodTypeAny, {
        speed?: number | undefined;
    }, {
        speed?: number | undefined;
    }>>;
    transmitCompensationMs: z.ZodOptional<z.ZodNumber>;
    pttMethod: z.ZodOptional<z.ZodEnum<["cat", "vox", "dtr", "rts"]>>;
    pttPort: z.ZodOptional<z.ZodString>;
    cwKeyPort: z.ZodOptional<z.ZodString>;
    cwKeyMethod: z.ZodOptional<z.ZodEnum<["dtr", "rts"]>>;
}, "strip", z.ZodTypeAny, {
    type: "none" | "network" | "serial" | "icom-wlan";
    network?: {
        host: string;
        port: number;
    } | undefined;
    serial?: {
        path: string;
        rigModel: number;
        serialConfig?: {
            data_bits?: "5" | "6" | "7" | "8" | undefined;
            stop_bits?: "1" | "2" | undefined;
            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
            rate?: number | undefined;
            timeout?: number | undefined;
            retry?: number | undefined;
            write_delay?: number | undefined;
            post_write_delay?: number | undefined;
        } | undefined;
        backendConfig?: Record<string, string> | undefined;
    } | undefined;
    spectrum?: {
        speed?: number | undefined;
    } | undefined;
    icomWlan?: {
        ip: string;
        port: number;
        dataMode: boolean;
        userName?: string | undefined;
        password?: string | undefined;
    } | undefined;
    transmitCompensationMs?: number | undefined;
    pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
    pttPort?: string | undefined;
    cwKeyPort?: string | undefined;
    cwKeyMethod?: "dtr" | "rts" | undefined;
}, {
    type: "none" | "network" | "serial" | "icom-wlan";
    network?: {
        host: string;
        port: number;
    } | undefined;
    serial?: {
        path: string;
        rigModel: number;
        serialConfig?: {
            data_bits?: "5" | "6" | "7" | "8" | undefined;
            stop_bits?: "1" | "2" | undefined;
            serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
            serial_handshake?: "None" | "Hardware" | "Software" | undefined;
            rts_state?: "ON" | "OFF" | "UNSET" | undefined;
            dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
            rate?: number | undefined;
            timeout?: number | undefined;
            retry?: number | undefined;
            write_delay?: number | undefined;
            post_write_delay?: number | undefined;
        } | undefined;
        backendConfig?: Record<string, string> | undefined;
    } | undefined;
    spectrum?: {
        speed?: number | undefined;
    } | undefined;
    icomWlan?: {
        ip: string;
        port: number;
        userName?: string | undefined;
        password?: string | undefined;
        dataMode?: boolean | undefined;
    } | undefined;
    transmitCompensationMs?: number | undefined;
    pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
    pttPort?: string | undefined;
    cwKeyPort?: string | undefined;
    cwKeyMethod?: "dtr" | "rts" | undefined;
}>;
/**
 * 电台配置响应Schema
 */
export declare const RadioConfigResponseSchema: z.ZodObject<{
    success: z.ZodBoolean;
    config: z.ZodObject<{
        type: z.ZodEnum<["none", "network", "serial", "icom-wlan"]>;
        network: z.ZodOptional<z.ZodObject<{
            host: z.ZodString;
            port: z.ZodNumber;
        }, "strip", z.ZodTypeAny, {
            host: string;
            port: number;
        }, {
            host: string;
            port: number;
        }>>;
        icomWlan: z.ZodOptional<z.ZodObject<{
            ip: z.ZodString;
            port: z.ZodNumber;
            userName: z.ZodOptional<z.ZodString>;
            password: z.ZodOptional<z.ZodString>;
            /**
             * 数据模式（Data Mode）
             * 启用时使用 USB-D 等数字模式，适用于 FT8/FT4 等数字通信
             * 默认值: true
             */
            dataMode: z.ZodDefault<z.ZodOptional<z.ZodBoolean>>;
        }, "strip", z.ZodTypeAny, {
            ip: string;
            port: number;
            dataMode: boolean;
            userName?: string | undefined;
            password?: string | undefined;
        }, {
            ip: string;
            port: number;
            userName?: string | undefined;
            password?: string | undefined;
            dataMode?: boolean | undefined;
        }>>;
        serial: z.ZodOptional<z.ZodObject<{
            path: z.ZodString;
            rigModel: z.ZodNumber;
            serialConfig: z.ZodOptional<z.ZodObject<{
                data_bits: z.ZodOptional<z.ZodEnum<["5", "6", "7", "8"]>>;
                stop_bits: z.ZodOptional<z.ZodEnum<["1", "2"]>>;
                serial_parity: z.ZodOptional<z.ZodEnum<["None", "Even", "Odd", "Mark", "Space"]>>;
                serial_handshake: z.ZodOptional<z.ZodEnum<["None", "Hardware", "Software"]>>;
                rts_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
                dtr_state: z.ZodOptional<z.ZodEnum<["ON", "OFF", "UNSET"]>>;
                rate: z.ZodOptional<z.ZodNumber>;
                timeout: z.ZodOptional<z.ZodNumber>;
                retry: z.ZodOptional<z.ZodNumber>;
                write_delay: z.ZodOptional<z.ZodNumber>;
                post_write_delay: z.ZodOptional<z.ZodNumber>;
            }, "strip", z.ZodTypeAny, {
                data_bits?: "5" | "6" | "7" | "8" | undefined;
                stop_bits?: "1" | "2" | undefined;
                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
                rate?: number | undefined;
                timeout?: number | undefined;
                retry?: number | undefined;
                write_delay?: number | undefined;
                post_write_delay?: number | undefined;
            }, {
                data_bits?: "5" | "6" | "7" | "8" | undefined;
                stop_bits?: "1" | "2" | undefined;
                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
                rate?: number | undefined;
                timeout?: number | undefined;
                retry?: number | undefined;
                write_delay?: number | undefined;
                post_write_delay?: number | undefined;
            }>>;
            backendConfig: z.ZodOptional<z.ZodRecord<z.ZodString, z.ZodString>>;
        }, "strip", z.ZodTypeAny, {
            path: string;
            rigModel: number;
            serialConfig?: {
                data_bits?: "5" | "6" | "7" | "8" | undefined;
                stop_bits?: "1" | "2" | undefined;
                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
                rate?: number | undefined;
                timeout?: number | undefined;
                retry?: number | undefined;
                write_delay?: number | undefined;
                post_write_delay?: number | undefined;
            } | undefined;
            backendConfig?: Record<string, string> | undefined;
        }, {
            path: string;
            rigModel: number;
            serialConfig?: {
                data_bits?: "5" | "6" | "7" | "8" | undefined;
                stop_bits?: "1" | "2" | undefined;
                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
                rate?: number | undefined;
                timeout?: number | undefined;
                retry?: number | undefined;
                write_delay?: number | undefined;
                post_write_delay?: number | undefined;
            } | undefined;
            backendConfig?: Record<string, string> | undefined;
        }>>;
        spectrum: z.ZodOptional<z.ZodObject<{
            speed: z.ZodOptional<z.ZodNumber>;
        }, "strip", z.ZodTypeAny, {
            speed?: number | undefined;
        }, {
            speed?: number | undefined;
        }>>;
        transmitCompensationMs: z.ZodOptional<z.ZodNumber>;
        pttMethod: z.ZodOptional<z.ZodEnum<["cat", "vox", "dtr", "rts"]>>;
        pttPort: z.ZodOptional<z.ZodString>;
        cwKeyPort: z.ZodOptional<z.ZodString>;
        cwKeyMethod: z.ZodOptional<z.ZodEnum<["dtr", "rts"]>>;
    }, "strip", z.ZodTypeAny, {
        type: "none" | "network" | "serial" | "icom-wlan";
        network?: {
            host: string;
            port: number;
        } | undefined;
        serial?: {
            path: string;
            rigModel: number;
            serialConfig?: {
                data_bits?: "5" | "6" | "7" | "8" | undefined;
                stop_bits?: "1" | "2" | undefined;
                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
                rate?: number | undefined;
                timeout?: number | undefined;
                retry?: number | undefined;
                write_delay?: number | undefined;
                post_write_delay?: number | undefined;
            } | undefined;
            backendConfig?: Record<string, string> | undefined;
        } | undefined;
        spectrum?: {
            speed?: number | undefined;
        } | undefined;
        icomWlan?: {
            ip: string;
            port: number;
            dataMode: boolean;
            userName?: string | undefined;
            password?: string | undefined;
        } | undefined;
        transmitCompensationMs?: number | undefined;
        pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
        pttPort?: string | undefined;
        cwKeyPort?: string | undefined;
        cwKeyMethod?: "dtr" | "rts" | undefined;
    }, {
        type: "none" | "network" | "serial" | "icom-wlan";
        network?: {
            host: string;
            port: number;
        } | undefined;
        serial?: {
            path: string;
            rigModel: number;
            serialConfig?: {
                data_bits?: "5" | "6" | "7" | "8" | undefined;
                stop_bits?: "1" | "2" | undefined;
                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
                rate?: number | undefined;
                timeout?: number | undefined;
                retry?: number | undefined;
                write_delay?: number | undefined;
                post_write_delay?: number | undefined;
            } | undefined;
            backendConfig?: Record<string, string> | undefined;
        } | undefined;
        spectrum?: {
            speed?: number | undefined;
        } | undefined;
        icomWlan?: {
            ip: string;
            port: number;
            userName?: string | undefined;
            password?: string | undefined;
            dataMode?: boolean | undefined;
        } | undefined;
        transmitCompensationMs?: number | undefined;
        pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
        pttPort?: string | undefined;
        cwKeyPort?: string | undefined;
        cwKeyMethod?: "dtr" | "rts" | undefined;
    }>;
}, "strip", z.ZodTypeAny, {
    success: boolean;
    config: {
        type: "none" | "network" | "serial" | "icom-wlan";
        network?: {
            host: string;
            port: number;
        } | undefined;
        serial?: {
            path: string;
            rigModel: number;
            serialConfig?: {
                data_bits?: "5" | "6" | "7" | "8" | undefined;
                stop_bits?: "1" | "2" | undefined;
                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
                rate?: number | undefined;
                timeout?: number | undefined;
                retry?: number | undefined;
                write_delay?: number | undefined;
                post_write_delay?: number | undefined;
            } | undefined;
            backendConfig?: Record<string, string> | undefined;
        } | undefined;
        spectrum?: {
            speed?: number | undefined;
        } | undefined;
        icomWlan?: {
            ip: string;
            port: number;
            dataMode: boolean;
            userName?: string | undefined;
            password?: string | undefined;
        } | undefined;
        transmitCompensationMs?: number | undefined;
        pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
        pttPort?: string | undefined;
        cwKeyPort?: string | undefined;
        cwKeyMethod?: "dtr" | "rts" | undefined;
    };
}, {
    success: boolean;
    config: {
        type: "none" | "network" | "serial" | "icom-wlan";
        network?: {
            host: string;
            port: number;
        } | undefined;
        serial?: {
            path: string;
            rigModel: number;
            serialConfig?: {
                data_bits?: "5" | "6" | "7" | "8" | undefined;
                stop_bits?: "1" | "2" | undefined;
                serial_parity?: "None" | "Even" | "Odd" | "Mark" | "Space" | undefined;
                serial_handshake?: "None" | "Hardware" | "Software" | undefined;
                rts_state?: "ON" | "OFF" | "UNSET" | undefined;
                dtr_state?: "ON" | "OFF" | "UNSET" | undefined;
                rate?: number | undefined;
                timeout?: number | undefined;
                retry?: number | undefined;
                write_delay?: number | undefined;
                post_write_delay?: number | undefined;
            } | undefined;
            backendConfig?: Record<string, string> | undefined;
        } | undefined;
        spectrum?: {
            speed?: number | undefined;
        } | undefined;
        icomWlan?: {
            ip: string;
            port: number;
            userName?: string | undefined;
            password?: string | undefined;
            dataMode?: boolean | undefined;
        } | undefined;
        transmitCompensationMs?: number | undefined;
        pttMethod?: "cat" | "vox" | "dtr" | "rts" | undefined;
        pttPort?: string | undefined;
        cwKeyPort?: string | undefined;
        cwKeyMethod?: "dtr" | "rts" | undefined;
    };
}>;
/**
 * 支持的电台型号Schema
 */
export declare const SupportedRigSchema: z.ZodObject<{
    rigModel: z.ZodNumber;
    mfgName: z.ZodString;
    modelName: z.ZodString;
}, "strip", z.ZodTypeAny, {
    rigModel: number;
    mfgName: string;
    modelName: string;
}, {
    rigModel: number;
    mfgName: string;
    modelName: string;
}>;
/**
 * 支持的电台列表响应Schema
 */
export declare const SupportedRigsResponseSchema: z.ZodObject<{
    rigs: z.ZodArray<z.ZodObject<{
        rigModel: z.ZodNumber;
        mfgName: z.ZodString;
        modelName: z.ZodString;
    }, "strip", z.ZodTypeAny, {
        rigModel: number;
        mfgName: string;
        modelName: string;
    }, {
        rigModel: number;
        mfgName: string;
        modelName: string;
    }>, "many">;
}, "strip", z.ZodTypeAny, {
    rigs: {
        rigModel: number;
        mfgName: string;
        modelName: string;
    }[];
}, {
    rigs: {
        rigModel: number;
        mfgName: string;
        modelName: string;
    }[];
}>;
export declare const RigConfigSchemaResponseSchema: z.ZodObject<{
    rigModel: z.ZodNumber;
    portType: z.ZodString;
    endpointKind: z.ZodEnum<["serial-port", "network-address", "device-path"]>;
    fields: z.ZodArray<z.ZodObject<{
        token: z.ZodNumber;
        name: z.ZodString;
        label: z.ZodString;
        tooltip: z.ZodString;
        defaultValue: z.ZodString;
        effectiveDefaultValue: z.ZodOptional<z.ZodString>;
        effectiveDefaultSource: z.ZodOptional<z.ZodEnum<["hamlib-schema", "rig-caps"]>>;
        type: z.ZodEnum<["string", "combo", "numeric", "checkbutton", "button", "binary", "int", "unknown"]>;
        numeric: z.ZodOptional<z.ZodObject<{
            min: z.ZodNumber;
            max: z.ZodNumber;
            step: z.ZodNumber;
        }, "strip", z.ZodTypeAny, {
            min: number;
            max: number;
            step: number;
        }, {
            min: number;
            max: number;
            step: number;
        }>>;
        options: z.ZodOptional<z.ZodArray<z.ZodString, "many">>;
    }, "strip", z.ZodTypeAny, {
        type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
        name: string;
        label: string;
        token: number;
        tooltip: string;
        defaultValue: string;
        options?: string[] | undefined;
        numeric?: {
            min: number;
            max: number;
            step: number;
        } | undefined;
        effectiveDefaultValue?: string | undefined;
        effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
    }, {
        type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
        name: string;
        label: string;
        token: number;
        tooltip: string;
        defaultValue: string;
        options?: string[] | undefined;
        numeric?: {
            min: number;
            max: number;
            step: number;
        } | undefined;
        effectiveDefaultValue?: string | undefined;
        effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
    }>, "many">;
}, "strip", z.ZodTypeAny, {
    rigModel: number;
    portType: string;
    endpointKind: "serial-port" | "network-address" | "device-path";
    fields: {
        type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
        name: string;
        label: string;
        token: number;
        tooltip: string;
        defaultValue: string;
        options?: string[] | undefined;
        numeric?: {
            min: number;
            max: number;
            step: number;
        } | undefined;
        effectiveDefaultValue?: string | undefined;
        effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
    }[];
}, {
    rigModel: number;
    portType: string;
    endpointKind: "serial-port" | "network-address" | "device-path";
    fields: {
        type: "string" | "unknown" | "combo" | "numeric" | "checkbutton" | "button" | "binary" | "int";
        name: string;
        label: string;
        token: number;
        tooltip: string;
        defaultValue: string;
        options?: string[] | undefined;
        numeric?: {
            min: number;
            max: number;
            step: number;
        } | undefined;
        effectiveDefaultValue?: string | undefined;
        effectiveDefaultSource?: "hamlib-schema" | "rig-caps" | undefined;
    }[];
}>;
/**
 * 电台信息Schema
 * 用于描述当前连接的电台的详细信息
 */
export declare const RadioInfoSchema: z.ZodObject<{
    /** 制造商名称，如 "Yaesu", "ICOM", "Network" */
    manufacturer: z.ZodString;
    /** 型号名称，如 "FT-991A", "IC-705", "RigCtrl" */
    model: z.ZodString;
    /** Hamlib 电台型号 ID (serial/network 模式使用，icom-wlan 模式可选) */
    rigModel: z.ZodOptional<z.ZodNumber>;
    /** 连接类型 */
    connectionType: z.ZodEnum<["serial", "network", "icom-wlan"]>;
    /** 固件版本 (如果可获取) */
    firmwareVersion: z.ZodOptional<z.ZodString>;
    /** 序列号 (如果可获取) */
    serialNumber: z.ZodOptional<z.ZodString>;
}, "strip", z.ZodTypeAny, {
    manufacturer: string;
    model: string;
    connectionType: "network" | "serial" | "icom-wlan";
    rigModel?: number | undefined;
    firmwareVersion?: string | undefined;
    serialNumber?: string | undefined;
}, {
    manufacturer: string;
    model: string;
    connectionType: "network" | "serial" | "icom-wlan";
    rigModel?: number | undefined;
    firmwareVersion?: string | undefined;
    serialNumber?: string | undefined;
}>;
/**
 * 串口信息Schema
 */
export declare const SerialPortSchema: z.ZodObject<{
    path: z.ZodString;
    manufacturer: z.ZodOptional<z.ZodString>;
    serialNumber: z.ZodOptional<z.ZodString>;
    pnpId: z.ZodOptional<z.ZodString>;
    locationId: z.ZodOptional<z.ZodString>;
    productId: z.ZodOptional<z.ZodString>;
    vendorId: z.ZodOptional<z.ZodString>;
}, "strip", z.ZodTypeAny, {
    path: string;
    manufacturer?: string | undefined;
    serialNumber?: string | undefined;
    pnpId?: string | undefined;
    locationId?: string | undefined;
    productId?: string | undefined;
    vendorId?: string | undefined;
}, {
    path: string;
    manufacturer?: string | undefined;
    serialNumber?: string | undefined;
    pnpId?: string | undefined;
    locationId?: string | undefined;
    productId?: string | undefined;
    vendorId?: string | undefined;
}>;
/**
 * 串口列表响应Schema
 */
export declare const SerialPortsResponseSchema: z.ZodObject<{
    ports: z.ZodArray<z.ZodObject<{
        path: z.ZodString;
        manufacturer: z.ZodOptional<z.ZodString>;
        serialNumber: z.ZodOptional<z.ZodString>;
        pnpId: z.ZodOptional<z.ZodString>;
        locationId: z.ZodOptional<z.ZodString>;
        productId: z.ZodOptional<z.ZodString>;
        vendorId: z.ZodOptional<z.ZodString>;
    }, "strip", z.ZodTypeAny, {
        path: string;
        manufacturer?: string | undefined;
        serialNumber?: string | undefined;
        pnpId?: string | undefined;
        locationId?: string | undefined;
        productId?: string | undefined;
        vendorId?: string | undefined;
    }, {
        path: string;
        manufacturer?: string | undefined;
        serialNumber?: string | undefined;
        pnpId?: string | undefined;
        locationId?: string | undefined;
        productId?: string | undefined;
        vendorId?: string | undefined;
    }>, "many">;
}, "strip", z.ZodTypeAny, {
    ports: {
        path: string;
        manufacturer?: string | undefined;
        serialNumber?: string | undefined;
        pnpId?: string | undefined;
        locationId?: string | undefined;
        productId?: string | undefined;
        vendorId?: string | undefined;
    }[];
}, {
    ports: {
        path: string;
        manufacturer?: string | undefined;
        serialNumber?: string | undefined;
        pnpId?: string | undefined;
        locationId?: string | undefined;
        productId?: string | undefined;
        vendorId?: string | undefined;
    }[];
}>;
/**
 * 测试响应Schema
 */
export declare const TestResponseSchema: z.ZodObject<{
    success: z.ZodBoolean;
    message: z.ZodOptional<z.ZodString>;
}, "strip", z.ZodTypeAny, {
    success: boolean;
    message?: string | undefined;
}, {
    success: boolean;
    message?: string | undefined;
}>;
/**
 * 天调能力Schema
 * 描述电台的天线调谐器功能支持情况
 */
export declare const TunerCapabilitiesSchema: z.ZodObject<{
    /** 是否支持天调功能 */
    supported: z.ZodBoolean;
    /** 是否支持开关控制 */
    hasSwitch: z.ZodBoolean;
    /** 是否支持手动调谐 */
    hasManualTune: z.ZodBoolean;
}, "strip", z.ZodTypeAny, {
    supported: boolean;
    hasSwitch: boolean;
    hasManualTune: boolean;
}, {
    supported: boolean;
    hasSwitch: boolean;
    hasManualTune: boolean;
}>;
/**
 * 天调状态Schema
 * 描述天线调谐器的当前状态
 */
export declare const TunerStatusSchema: z.ZodObject<{
    /** 天调是否已启用 */
    enabled: z.ZodBoolean;
    /** 是否正在调谐中 */
    active: z.ZodBoolean;
    /** 驻波比 (SWR) 值 */
    swr: z.ZodOptional<z.ZodNumber>;
    /** 调谐状态 */
    status: z.ZodOptional<z.ZodEnum<["idle", "tuning", "success", "failed"]>>;
}, "strip", z.ZodTypeAny, {
    active: boolean;
    enabled: boolean;
    status?: "success" | "idle" | "tuning" | "failed" | undefined;
    swr?: number | undefined;
}, {
    active: boolean;
    enabled: boolean;
    status?: "success" | "idle" | "tuning" | "failed" | undefined;
    swr?: number | undefined;
}>;
/**
 * 天调能力响应Schema
 */
export declare const TunerCapabilitiesResponseSchema: z.ZodObject<{
    success: z.ZodBoolean;
    capabilities: z.ZodObject<{
        /** 是否支持天调功能 */
        supported: z.ZodBoolean;
        /** 是否支持开关控制 */
        hasSwitch: z.ZodBoolean;
        /** 是否支持手动调谐 */
        hasManualTune: z.ZodBoolean;
    }, "strip", z.ZodTypeAny, {
        supported: boolean;
        hasSwitch: boolean;
        hasManualTune: boolean;
    }, {
        supported: boolean;
        hasSwitch: boolean;
        hasManualTune: boolean;
    }>;
}, "strip", z.ZodTypeAny, {
    success: boolean;
    capabilities: {
        supported: boolean;
        hasSwitch: boolean;
        hasManualTune: boolean;
    };
}, {
    success: boolean;
    capabilities: {
        supported: boolean;
        hasSwitch: boolean;
        hasManualTune: boolean;
    };
}>;
/**
 * 天调状态响应Schema
 */
export declare const TunerStatusResponseSchema: z.ZodObject<{
    success: z.ZodBoolean;
    status: z.ZodObject<{
        /** 天调是否已启用 */
        enabled: z.ZodBoolean;
        /** 是否正在调谐中 */
        active: z.ZodBoolean;
        /** 驻波比 (SWR) 值 */
        swr: z.ZodOptional<z.ZodNumber>;
        /** 调谐状态 */
        status: z.ZodOptional<z.ZodEnum<["idle", "tuning", "success", "failed"]>>;
    }, "strip", z.ZodTypeAny, {
        active: boolean;
        enabled: boolean;
        status?: "success" | "idle" | "tuning" | "failed" | undefined;
        swr?: number | undefined;
    }, {
        active: boolean;
        enabled: boolean;
        status?: "success" | "idle" | "tuning" | "failed" | undefined;
        swr?: number | undefined;
    }>;
}, "strip", z.ZodTypeAny, {
    status: {
        active: boolean;
        enabled: boolean;
        status?: "success" | "idle" | "tuning" | "failed" | undefined;
        swr?: number | undefined;
    };
    success: boolean;
}, {
    status: {
        active: boolean;
        enabled: boolean;
        status?: "success" | "idle" | "tuning" | "failed" | undefined;
        swr?: number | undefined;
    };
    success: boolean;
}>;
/**
 * 电台连接状态枚举
 * 精细化的连接状态，贯穿 server → contracts → web
 */
export declare enum RadioConnectionStatus {
    /** 未配置电台 (type=none) */
    NOT_CONFIGURED = "not_configured",
    /** 已断开 (type!=none, 但未连接/初始状态) */
    DISCONNECTED = "disconnected",
    /** 连接中 */
    CONNECTING = "connecting",
    /** 已连接 */
    CONNECTED = "connected",
    /** 自动重连中（运行中断线后自动重连） */
    RECONNECTING = "reconnecting",
    /** 连接丢失（重连耗尽或运行中断连后停止重连） */
    CONNECTION_LOST = "connection_lost"
}
/**
 * 重连进度信息
 */
export declare const ReconnectProgressSchema: z.ZodObject<{
    attempt: z.ZodNumber;
    maxAttempts: z.ZodNumber;
    nextRetryMs: z.ZodOptional<z.ZodNumber>;
}, "strip", z.ZodTypeAny, {
    attempt: number;
    maxAttempts: number;
    nextRetryMs?: number | undefined;
}, {
    attempt: number;
    maxAttempts: number;
    nextRetryMs?: number | undefined;
}>;
export type ReconnectProgress = z.infer<typeof ReconnectProgressSchema>;
export declare const RadioConnectionStatusSchema: z.ZodNativeEnum<typeof RadioConnectionStatus>;
/**
 * 核心电台能力
 * 用于描述主流程是否仍可继续使用某项核心读写能力。
 *
 * 语义：
 * - true: 当前连接仍可继续尝试该能力（已确认支持，或尚未确认不支持）
 * - false: 已明确确认当前电台/连接不支持该能力，后续不再重复访问底层
 */
export declare const CoreRadioCapabilitiesSchema: z.ZodObject<{
    readFrequency: z.ZodBoolean;
    writeFrequency: z.ZodBoolean;
    readRadioMode: z.ZodBoolean;
    writeRadioMode: z.ZodBoolean;
}, "strip", z.ZodTypeAny, {
    readFrequency: boolean;
    writeFrequency: boolean;
    readRadioMode: boolean;
    writeRadioMode: boolean;
}, {
    readFrequency: boolean;
    writeFrequency: boolean;
    readRadioMode: boolean;
    writeRadioMode: boolean;
}>;
export declare const CoreCapabilityDiagnosticSchema: z.ZodObject<{
    capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
    message: z.ZodString;
    stack: z.ZodString;
    recordedAt: z.ZodNumber;
}, "strip", z.ZodTypeAny, {
    message: string;
    capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
    stack: string;
    recordedAt: number;
}, {
    message: string;
    capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
    stack: string;
    recordedAt: number;
}>;
export declare const CoreCapabilityDiagnosticsSchema: z.ZodObject<{
    readFrequency: z.ZodOptional<z.ZodObject<{
        capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
        message: z.ZodString;
        stack: z.ZodString;
        recordedAt: z.ZodNumber;
    }, "strip", z.ZodTypeAny, {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    }, {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    }>>;
    writeFrequency: z.ZodOptional<z.ZodObject<{
        capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
        message: z.ZodString;
        stack: z.ZodString;
        recordedAt: z.ZodNumber;
    }, "strip", z.ZodTypeAny, {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    }, {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    }>>;
    readRadioMode: z.ZodOptional<z.ZodObject<{
        capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
        message: z.ZodString;
        stack: z.ZodString;
        recordedAt: z.ZodNumber;
    }, "strip", z.ZodTypeAny, {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    }, {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    }>>;
    writeRadioMode: z.ZodOptional<z.ZodObject<{
        capability: z.ZodEnum<["readFrequency", "writeFrequency", "readRadioMode", "writeRadioMode"]>;
        message: z.ZodString;
        stack: z.ZodString;
        recordedAt: z.ZodNumber;
    }, "strip", z.ZodTypeAny, {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    }, {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    }>>;
}, "strip", z.ZodTypeAny, {
    readFrequency?: {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    } | undefined;
    writeFrequency?: {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    } | undefined;
    readRadioMode?: {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    } | undefined;
    writeRadioMode?: {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    } | undefined;
}, {
    readFrequency?: {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    } | undefined;
    writeFrequency?: {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    } | undefined;
    readRadioMode?: {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    } | undefined;
    writeRadioMode?: {
        message: string;
        capability: "readFrequency" | "writeFrequency" | "readRadioMode" | "writeRadioMode";
        stack: string;
        recordedAt: number;
    } | undefined;
}>;
/**
 * 自定义频率预设设置Schema
 */
export declare const CustomFrequencyPresetsSchema: z.ZodObject<{
    presets: z.ZodArray<z.ZodEffects<z.ZodObject<{
        band: z.ZodString;
        mode: z.ZodString;
        radioMode: z.ZodOptional<z.ZodString>;
        frequency: z.ZodNumber;
        description: z.ZodOptional<z.ZodString>;
        repeaterShift: z.ZodOptional<z.ZodEnum<["none", "minus", "plus"]>>;
        repeaterOffsetHz: z.ZodOptional<z.ZodNumber>;
        toneMode: z.ZodOptional<z.ZodEnum<["none", "ctcss", "dcs"]>>;
        ctcssToneTenthsHz: z.ZodOptional<z.ZodNumber>;
        dcsCode: z.ZodOptional<z.ZodNumber>;
    }, "strip", z.ZodTypeAny, {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }, {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }>, {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }, {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }>, "many">;
}, "strip", z.ZodTypeAny, {
    presets: {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }[];
}, {
    presets: {
        mode: string;
        frequency: number;
        band: string;
        radioMode?: string | undefined;
        description?: string | undefined;
        repeaterShift?: "none" | "minus" | "plus" | undefined;
        repeaterOffsetHz?: number | undefined;
        toneMode?: "none" | "ctcss" | "dcs" | undefined;
        ctcssToneTenthsHz?: number | undefined;
        dcsCode?: number | undefined;
    }[];
}>;
export type CustomFrequencyPresets = z.infer<typeof CustomFrequencyPresetsSchema>;
export type PresetFrequency = z.infer<typeof PresetFrequencySchema>;
export type RepeaterShift = z.infer<typeof RepeaterShiftSchema>;
export type ToneSquelchMode = z.infer<typeof ToneSquelchModeSchema>;
export type FrequencyListResponse = z.infer<typeof FrequencyListResponseSchema>;
export type SerialConfig = z.infer<typeof SerialConfigSchema>;
export type HamlibBackendConfig = z.infer<typeof HamlibBackendConfigSchema>;
export type HamlibConfigFieldType = z.infer<typeof HamlibConfigFieldTypeSchema>;
export type HamlibConfigField = z.infer<typeof HamlibConfigFieldSchema>;
export type NetworkConfig = z.infer<typeof NetworkConfigSchema>;
export type IcomWlanConfig = z.infer<typeof IcomWlanConfigSchema>;
export type SerialConnectionConfig = z.infer<typeof SerialConnectionConfigSchema>;
export type HamlibSpectrumConfig = z.infer<typeof HamlibSpectrumConfigSchema>;
export type PttMethod = z.infer<typeof PttMethodSchema>;
export type HamlibConfig = z.infer<typeof HamlibConfigSchema>;
export type RadioConfigResponse = z.infer<typeof RadioConfigResponseSchema>;
export type SupportedRig = z.infer<typeof SupportedRigSchema>;
export type SupportedRigsResponse = z.infer<typeof SupportedRigsResponseSchema>;
export type RigConfigSchemaResponse = z.infer<typeof RigConfigSchemaResponseSchema>;
export type RadioInfo = z.infer<typeof RadioInfoSchema>;
export type SerialPort = z.infer<typeof SerialPortSchema>;
export type SerialPortsResponse = z.infer<typeof SerialPortsResponseSchema>;
export type TestResponse = z.infer<typeof TestResponseSchema>;
export type TunerCapabilities = z.infer<typeof TunerCapabilitiesSchema>;
export type TunerStatus = z.infer<typeof TunerStatusSchema>;
export type TunerCapabilitiesResponse = z.infer<typeof TunerCapabilitiesResponseSchema>;
export type TunerStatusResponse = z.infer<typeof TunerStatusResponseSchema>;
export type CoreRadioCapabilities = z.infer<typeof CoreRadioCapabilitiesSchema>;
export type CoreCapabilityDiagnostic = z.infer<typeof CoreCapabilityDiagnosticSchema>;
export type CoreCapabilityDiagnostics = z.infer<typeof CoreCapabilityDiagnosticsSchema>;
//# sourceMappingURL=radio.schema.d.ts.map