export declare enum HttpStatusCode {
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.3
     *
     * The request has been received but not yet acted upon. It is non-committal, meaning that there is no way in HTTP
     * to later send an asynchronous response indicating the outcome of processing the request. It is intended for cases
     * where another process or server handles the request, or for batch processing.
     */
    ACCEPTED = 202,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.6.3
     *
     * This error response means that the server, while working as a gateway to get a response needed to handle the
     * request, got an invalid response.
     */
    BAD_GATEWAY = 502,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.1
     *
     * This response means that server could not understand the request due to invalid syntax.
     */
    BAD_REQUEST = 400,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.8
     *
     * This response is sent when a request conflicts with the current state of the server.
     */
    CONFLICT = 409,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.2.1
     *
     * This interim response indicates that everything so far is OK and that the client should continue with the request
     * or ignore it if it is already finished.
     */
    CONTINUE = 100,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.2
     *
     * The request has succeeded and a new resource has been created as a result of it. This is typically the response
     * sent after a PUT request.
     */
    CREATED = 201,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.14
     *
     * This response code means the expectation indicated by the Expect request header field can't be met by the server.
     */
    EXPECTATION_FAILED = 417,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.5
     *
     * The request failed due to failure of a previous request.
     */
    FAILED_DEPENDENCY = 424,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.3
     *
     * The client does not have access rights to the content, i.e. they are unauthorized, so server is rejecting to give
     * proper response. Unlike 401, the client's identity is known to the server.
     */
    FORBIDDEN = 403,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.6.5
     *
     * This error response is given when the server is acting as a gateway and cannot get a response in time.
     */
    GATEWAY_TIMEOUT = 504,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.9
     *
     * This response would be sent when the requested content has been permenantly deleted from server, with no
     * forwarding address. Clients are expected to remove their caches and links to the resource. The HTTP specification
     * intends this status code to be used for "limited-time, promotional services". APIs should not feel compelled to
     * indicate resources that have been deleted with this status code.
     */
    GONE = 410,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.6.6
     *
     * The HTTP version used in the request is not supported by the server.
     */
    HTTP_VERSION_NOT_SUPPORTED = 505,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc2324#section-2.3.2
     *
     * Any attempt to brew coffee with a teapot should result in the error code "418 I'm a teapot". The resulting entity
     * body MAY be short and stout.
     */
    IM_A_TEAPOT = 418,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.6
     *
     * The 507 (Insufficient Storage) status code means the method could not be performed on the resource because the
     * server is unable to store the representation needed to successfully complete the request. This condition is
     * considered to be temporary. If the request which received this status code was the result of a user action,
     * the request MUST NOT be repeated until it is requested by a separate user action.
     */
    INSUFFICIENT_SPACE_ON_RESOURCE = 419,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.6
     *
     * The server has an internal configuration error: the chosen variant resource is configured to engage in
     * transparent content negotiation itself, and is therefore not a proper end point in the negotiation process.
     */
    INSUFFICIENT_STORAGE = 507,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.6.1
     *
     * The server encountered an unexpected condition that prevented it from fulfilling the request.
     */
    INTERNAL_SERVER_ERROR = 500,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.10
     *
     * The server rejected the request because the Content-Length header field is
     * not defined and the server requires it.
     */
    LENGTH_REQUIRED = 411,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.4
     *
     * The resource that is being accessed is locked.
     */
    LOCKED = 423,
    /**
     * @deprecated
     * Official Documentation @ https://tools.ietf.org/rfcdiff?difftype=--hwdiff&url2=draft-ietf-webdav-protocol-06.txt
     *
     * A deprecated response used by the Spring Framework when a method has failed.
     */
    METHOD_FAILURE = 420,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.5
     *
     * The request method is known by the server but has been disabled and cannot be used. For example, an API may
     * forbid DELETE-ing a resource. The two mandatory methods, GET and HEAD, must never be disabled and should not
     * return this error code.
     */
    METHOD_NOT_ALLOWED = 405,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.4.2
     *
     * This response code means that URI of requested resource has been changed. Probably, new URI would be given
     * in the response.
     */
    MOVED_PERMANENTLY = 301,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.4.3
     *
     * This response code means that URI of requested resource has been changed temporarily. New changes in the URI
     * might be made in the future. Therefore, this same URI should be used by the client in future requests.
     */
    MOVED_TEMPORARILY = 302,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.2
     *
     * A Multi-Status response conveys information about multiple resources in situations where multiple status codes
     * might be appropriate.
     */
    MULTI_STATUS = 207,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.4.1
     *
     * The request has more than one possible responses. User-agent or user should choose one of them. There is no
     * standardized way to choose one of the responses.
     */
    MULTIPLE_CHOICES = 300,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc6585#section-6
     *
     * The 511 status code indicates that the client needs to authenticate to gain network access.
     */
    NETWORK_AUTHENTICATION_REQUIRED = 511,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.5
     *
     * There is no content to send for this request, but the headers may be useful. The user-agent may update its cached
     * headers for this resource with the new ones.
     */
    NO_CONTENT = 204,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.4
     *
     * This response code means returned meta-information set is not exact set as available from the origin server, but
     * collected from a local or a third party copy. Except this condition, 200 OK response should be preferred instead
     * of this response.
     */
    NON_AUTHORITATIVE_INFORMATION = 203,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.6
     *
     * This response is sent when the web server, after performing server-driven content negotiation, doesn't find any
     * content following the criteria given by the user agent.
     */
    NOT_ACCEPTABLE = 406,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.4
     *
     * The server can not find requested resource. In the browser, this means the URL is not recognized. In an API, this
     * can also mean that the endpoint is valid but the resource itself does not exist. Servers may also send this
     * response instead of 403 to hide the existence of a resource from an unauthorized client. This response code is
     * probably the most famous one due to its frequent occurence on the web.
     */
    NOT_FOUND = 404,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.6.2
     *
     * The request method is not supported by the server and cannot be handled. The only methods that servers are
     * required to support (and therefore that must not return this code) are GET and HEAD.
     */
    NOT_IMPLEMENTED = 501,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7232#section-4.1
     *
     * This is used for caching purposes. It is telling to client that response has not been modified. So, client
     * can continue to use same cached version of response.
     */
    NOT_MODIFIED = 304,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.1
     *
     * The request has succeeded. The meaning of a success varies depending on the HTTP method:
     * GET: The resource has been fetched and is transmitted in the message body.
     * HEAD: The entity headers are in the message body.
     * POST: The resource describing the result of the action is transmitted in the message body.
     * TRACE: The message body contains the request message as received by the server
     */
    OK = 200,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7233#section-4.1
     *
     * This response code is used because of range header sent by the client to separate download into multiple streams.
     */
    PARTIAL_CONTENT = 206,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.2
     *
     * This response code is reserved for future use. Initial aim for creating this code was using it for digital
     * payment systems however this is not used currently.
     */
    PAYMENT_REQUIRED = 402,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7538#section-3
     *
     * This means that the resource is now permanently located at another URI, specified by the Location:
     * HTTP Response header. This has the same semantics as the 301 Moved Permanently HTTP response code,
     * with the exception that the user agent must not change the HTTP method used: if a POST was used in the first
     * request, a POST must be used in the second request.
     */
    PERMANENT_REDIRECT = 308,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7232#section-4.2
     *
     * The client has indicated preconditions in its headers which the server does not meet.
     */
    PRECONDITION_FAILED = 412,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc6585#section-3
     *
     * The origin server requires the request to be conditional. Intended to prevent the 'lost update' problem, where
     * a client GETs a resource's state, modifies it, and PUTs it back to the server, when meanwhile a third party has
     * modified the state on the server, leading to a conflict.
     */
    PRECONDITION_REQUIRED = 428,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.1
     *
     * This code indicates that the server has received and is processing the request, but no response is available yet.
     */
    PROCESSING = 102,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7235#section-3.2
     *
     * This is similar to 401 but authentication is needed to be done by a proxy.
     */
    PROXY_AUTHENTICATION_REQUIRED = 407,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc6585#section-5
     *
     * The server is unwilling to process the request because its header fields are too large. The request MAY be
     * resubmitted after reducing the size of the request header fields.
     */
    REQUEST_HEADER_FIELDS_TOO_LARGE = 431,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.7
     *
     * This response is sent on an idle connection by some servers, even without any previous request by the client.
     * It means that the server would like to shut down this unused connection. This response is used much more since
     * some browsers, like Chrome, Firefox 27+, or IE9, use HTTP pre-connection mechanisms to speed up surfing. Also
     * note that some servers merely shut down the connection without sending this message.
     */
    REQUEST_TIMEOUT = 408,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.11
     *
     * Request entity is larger than limits defined by server; the server might close the connection or return an
     * Retry-After header field.
     */
    REQUEST_TOO_LONG = 413,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.12
     *
     * The URI requested by the client is longer than the server is willing to interpret.
     */
    REQUEST_URI_TOO_LONG = 414,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7233#section-4.4
     *
     * The range specified by the Range header field in the request can't be fulfilled; it's possible that the range
     * is outside the size of the target URI's data.
     */
    REQUESTED_RANGE_NOT_SATISFIABLE = 416,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.6
     *
     * This response code is sent after accomplishing request to tell user agent reset document view which
     * sent this request.
     */
    RESET_CONTENT = 205,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.4.4
     *
     * Server sent this response to directing client to get requested resource to another URI with an GET request.
     */
    SEE_OTHER = 303,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.6.4
     *
     * The server is not ready to handle the request. Common causes are a server that is down for maintenance or
     * that is overloaded. Note that together with this response, a user-friendly page explaining the problem should
     * be sent. This responses should be used for temporary conditions and the Retry-After: HTTP header should,
     * if possible, contain the estimated time before the recovery of the service. The webmaster must also take
     * care about the caching-related headers that are sent along with this response, as these temporary condition
     * responses should usually not be cached.
     */
    SERVICE_UNAVAILABLE = 503,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.2.2
     *
     * This code is sent in response to an Upgrade request header by the client, and indicates the protocol the server
     * is switching too.
     */
    SWITCHING_PROTOCOLS = 101,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.4.7
     *
     * Server sent this response to directing client to get requested resource to another URI with same method that
     * used prior request. This has the same semantic than the 302 Found HTTP response code, with the exception that
     * the user agent must not change the HTTP method used: if a POST was used in the first request, a POST must be
     * used in the second request.
     */
    TEMPORARY_REDIRECT = 307,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc6585#section-4
     *
     * The user has sent too many requests in a given amount of time ("rate limiting").
     */
    TOO_MANY_REQUESTS = 429,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7235#section-3.1
     *
     * Although the HTTP standard specifies "unauthorized", semantically this response means "unauthenticated".
     * That is, the client must authenticate itself to get the requested response.
     */
    UNAUTHORIZED = 401,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7725
     *
     * The user-agent requested a resource that cannot legally be provided, such as a web page censored by a government.
     */
    UNAVAILABLE_FOR_LEGAL_REASONS = 451,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.3
     *
     * The request was well-formed but was unable to be followed due to semantic errors.
     */
    UNPROCESSABLE_ENTITY = 422,
    /**
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.13
     *
     * The media format of the requested data is not supported by the server, so the server is rejecting the request.
     */
    UNSUPPORTED_MEDIA_TYPE = 415,
    /**
     * @deprecated
     * Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.4.6
     *
     * Was defined in a previous version of the HTTP specification to indicate that a requested response must be
     * accessed by a proxy. It has been deprecated due to security concerns regarding in-band configuration of a proxy.
     */
    USE_PROXY = 305
}