import * as pulumi from "@pulumi/pulumi";
import * as inputs from "./types/input";
import * as outputs from "./types/output";
/**
 * Use this resource to manage cardinality limit overrides for a New Relic account.
 *
 * Dimensional metrics in New Relic are subject to a per-metric cardinality limit — the maximum number of unique attribute-value combinations a single metric name may produce per day. This resource lets you raise or lower that limit, either account-wide (for all metrics at once) or for individual named metrics.
 *
 * Two modes are available, selected via the required `mode` argument.
 *
 * > **Note:** Cardinality limit overrides are managed via reset rather than removal. Running `terraform destroy` resets the affected limit(s) back to the platform default of **100,000**. The behaviour for each mode is described in the sections below.
 *
 * ***
 *
 * ## DEFAULT Mode
 *
 * Sets a single account-wide limit that applies to every dimensional metric in the account that does not have its own per-metric override.
 *
 * ### Example
 *
 * ```typescript
 * import * as pulumi from "@pulumi/pulumi";
 * import * as newrelic from "@pulumi/newrelic";
 *
 * const accountDefault = new newrelic.CardinalityManagement("account_default", {
 *     mode: "DEFAULT",
 *     cardinalityLimit: 150000,
 * });
 * ```
 *
 * ### Behaviour
 *
 * - **`pulumi up`** — submits the new default value. The change takes effect in the enforcement layer straight away.
 * - **`pulumi preview` / `terraform refresh` on an existing resource** — reads the current account-wide default and reconciles state. Any drift is surfaced before the next apply.
 * - **`terraform destroy`** — resets the account-wide default to the platform default of **100,000** and displays a confirmation warning.
 *
 * > **Note:** Changes may take a few minutes to be visible in the New Relic UI, particularly if affected metrics have not sent data recently.
 *
 * ***
 *
 * ## PER_METRIC Mode
 *
 * Sets individual cardinality limits for one or more named metrics. Each metric is configured in its own `metric` block and can have a different limit.
 *
 * ### Example — single metric
 *
 * ```typescript
 * import * as pulumi from "@pulumi/pulumi";
 * import * as newrelic from "@pulumi/newrelic";
 *
 * const perMetric = new newrelic.CardinalityManagement("per_metric", {
 *     mode: "PER_METRIC",
 *     metrics: [{
 *         name: "http.server.duration",
 *         cardinalityLimit: 200000,
 *     }],
 * });
 * ```
 *
 * ### Example — multiple metrics in one resource
 *
 * ```typescript
 * import * as pulumi from "@pulumi/pulumi";
 * import * as newrelic from "@pulumi/newrelic";
 *
 * const highCardinalityMetrics = new newrelic.CardinalityManagement("high_cardinality_metrics", {
 *     mode: "PER_METRIC",
 *     metrics: [
 *         {
 *             name: "http.server.duration",
 *             cardinalityLimit: 200000,
 *         },
 *         {
 *             name: "otelcol_nrreceiver_incoming_request_proxy",
 *             cardinalityLimit: 300000,
 *         },
 *         {
 *             name: "k8s.pod.cpu.usage",
 *             cardinalityLimit: 150000,
 *         },
 *     ],
 * });
 * ```
 *
 * ### Example — managing many metrics in bulk
 *
 * If you have a long list of metrics to manage, you can keep a single source of truth in `locals` and use a `dynamic` block to expand them into `metric` blocks at apply time. Adding or removing a metric is then a one-line edit.
 *
 * ```typescript
 * import * as pulumi from "@pulumi/pulumi";
 * import * as newrelic from "@pulumi/newrelic";
 *
 * const highCardinalityMetrics = [
 *     {
 *         name: "http.server.duration",
 *         limit: 200000,
 *     },
 *     {
 *         name: "otelcol_nrreceiver_incoming_request_proxy",
 *         limit: 300000,
 *     },
 *     {
 *         name: "k8s.pod.cpu.usage",
 *         limit: 150000,
 *     },
 *     {
 *         name: "k8s.pod.memory.usage",
 *         limit: 150000,
 *     },
 * ];
 * const bulk = new newrelic.CardinalityManagement("bulk", {
 *     metrics: highCardinalityMetrics.map((v, k) => ({key: k, value: v})).map(entry => ({
 *         name: entry.value.name,
 *         cardinalityLimit: entry.value.limit,
 *     })),
 *     mode: "PER_METRIC",
 * });
 * ```
 *
 * ### Behaviour
 *
 * - **`pulumi up`** — submits one override per `metric` block. A warning is displayed as a reminder that updates may take a few minutes to be reflected in the UI.
 * - **`pulumi preview` / `terraform refresh` on an existing resource** — in `PER_METRIC` mode, `cardinalityLimit` values in state reflect the last configuration applied via terraform — this is the expected behaviour for this mode. A note is displayed as a reminder.
 * - **`terraform destroy`** — resets each managed metric's limit to the platform default of **100,000** and displays a confirmation warning.
 *
 * > **Note:** In `PER_METRIC` mode, the `cardinalityLimit` values within `metric` blocks reflect the last configuration applied via terraform. If any of these limits have been adjusted outside of terraform, run `pulumi up` to re-apply the desired values.
 *
 * ***
 *
 * ## Using Both Modes Together
 *
 * You can manage both the account-wide default and individual metric overrides at the same time:
 *
 * ```typescript
 * import * as pulumi from "@pulumi/pulumi";
 * import * as newrelic from "@pulumi/newrelic";
 *
 * const accountDefault = new newrelic.CardinalityManagement("account_default", {
 *     mode: "DEFAULT",
 *     cardinalityLimit: 150000,
 * });
 * const perMetric = new newrelic.CardinalityManagement("per_metric", {
 *     mode: "PER_METRIC",
 *     metrics: [
 *         {
 *             name: "http.server.duration",
 *             cardinalityLimit: 250000,
 *         },
 *         {
 *             name: "otelcol_nrreceiver_incoming_request_proxy",
 *             cardinalityLimit: 300000,
 *         },
 *     ],
 * });
 * ```
 *
 * ***
 *
 * ## Import
 *
 * Cardinality management resources can be imported using the composite ID format `<account_id>:<mode>`.
 *
 * For a `DEFAULT` override:
 *
 * ```sh
 * $ pulumi import newrelic:index/cardinalityManagement:CardinalityManagement account_default 12345678:DEFAULT
 * ```
 *
 * For a `PER_METRIC` override:
 *
 * ```sh
 * $ pulumi import newrelic:index/cardinalityManagement:CardinalityManagement per_metric 12345678:PER_METRIC
 * ```
 *
 * > **Note:** When importing a `PER_METRIC` resource, `metric` blocks cannot be auto-populated on import and must be defined manually in your configuration. Run `pulumi up` after import to re-apply the desired limits.
 */
export declare class CardinalityManagement extends pulumi.CustomResource {
    /**
     * Get an existing CardinalityManagement resource's state with the given name, ID, and optional extra
     * properties used to qualify the lookup.
     *
     * @param name The _unique_ name of the resulting resource.
     * @param id The _unique_ provider ID of the resource to lookup.
     * @param state Any extra arguments used during the lookup.
     * @param opts Optional settings to control the behavior of the CustomResource.
     */
    static get(name: string, id: pulumi.Input<pulumi.ID>, state?: CardinalityManagementState, opts?: pulumi.CustomResourceOptions): CardinalityManagement;
    /**
     * Returns true if the given object is an instance of CardinalityManagement.  This is designed to work even
     * when multiple copies of the Pulumi SDK have been loaded into the same process.
     */
    static isInstance(obj: any): obj is CardinalityManagement;
    /**
     * The account-wide cardinality limit — the maximum number of unique dimension-value combinations allowed per metric per day. Required when `mode` is `"DEFAULT"`; must not be set when `mode` is `"PER_METRIC"`.
     */
    readonly cardinalityLimit: pulumi.Output<number | undefined>;
    /**
     * One or more metric override blocks. Required when `mode` is `"PER_METRIC"`; must not be set when `mode` is `"DEFAULT"`. Each block supports:
     */
    readonly metrics: pulumi.Output<outputs.CardinalityManagementMetric[] | undefined>;
    /**
     * The override mode. Accepted values: `"DEFAULT"` or `"PER_METRIC"`. Forces re-creation when changed.
     * * `DEFAULT` — sets an account-wide limit for all metrics. `cardinalityLimit` is required; `metric` blocks must not be set.
     * * `PER_METRIC` — sets individual limits for named metrics. At least one `metric` block is required; `cardinalityLimit` must not be set at the top level.
     */
    readonly mode: pulumi.Output<string>;
    /**
     * Create a CardinalityManagement resource with the given unique name, arguments, and options.
     *
     * @param name The _unique_ name of the resource.
     * @param args The arguments to use to populate this resource's properties.
     * @param opts A bag of options that control this resource's behavior.
     */
    constructor(name: string, args: CardinalityManagementArgs, opts?: pulumi.CustomResourceOptions);
}
/**
 * Input properties used for looking up and filtering CardinalityManagement resources.
 */
export interface CardinalityManagementState {
    /**
     * The account-wide cardinality limit — the maximum number of unique dimension-value combinations allowed per metric per day. Required when `mode` is `"DEFAULT"`; must not be set when `mode` is `"PER_METRIC"`.
     */
    cardinalityLimit?: pulumi.Input<number | undefined>;
    /**
     * One or more metric override blocks. Required when `mode` is `"PER_METRIC"`; must not be set when `mode` is `"DEFAULT"`. Each block supports:
     */
    metrics?: pulumi.Input<pulumi.Input<inputs.CardinalityManagementMetric>[] | undefined>;
    /**
     * The override mode. Accepted values: `"DEFAULT"` or `"PER_METRIC"`. Forces re-creation when changed.
     * * `DEFAULT` — sets an account-wide limit for all metrics. `cardinalityLimit` is required; `metric` blocks must not be set.
     * * `PER_METRIC` — sets individual limits for named metrics. At least one `metric` block is required; `cardinalityLimit` must not be set at the top level.
     */
    mode?: pulumi.Input<string | undefined>;
}
/**
 * The set of arguments for constructing a CardinalityManagement resource.
 */
export interface CardinalityManagementArgs {
    /**
     * The account-wide cardinality limit — the maximum number of unique dimension-value combinations allowed per metric per day. Required when `mode` is `"DEFAULT"`; must not be set when `mode` is `"PER_METRIC"`.
     */
    cardinalityLimit?: pulumi.Input<number | undefined>;
    /**
     * One or more metric override blocks. Required when `mode` is `"PER_METRIC"`; must not be set when `mode` is `"DEFAULT"`. Each block supports:
     */
    metrics?: pulumi.Input<pulumi.Input<inputs.CardinalityManagementMetric>[] | undefined>;
    /**
     * The override mode. Accepted values: `"DEFAULT"` or `"PER_METRIC"`. Forces re-creation when changed.
     * * `DEFAULT` — sets an account-wide limit for all metrics. `cardinalityLimit` is required; `metric` blocks must not be set.
     * * `PER_METRIC` — sets individual limits for named metrics. At least one `metric` block is required; `cardinalityLimit` must not be set at the top level.
     */
    mode: pulumi.Input<string>;
}
//# sourceMappingURL=cardinalityManagement.d.ts.map