/** * @license * Copyright 2022-2026 Matter.js Authors * SPDX-License-Identifier: Apache-2.0 */ import { BitFlag } from "@matter/types"; export declare const PairingHintBitmap: { /** * The Device will automatically enter Commissioning Mode upon power cycle (unplug/re- plug, remove/re-insert * batteries). This bit SHALL be set to 1 for devices using Standard Commissioning Flow, and set to 0 otherwise. */ powerCycle: BitFlag; /** * This SHALL be set to 1 for devices requiring Custom Commissioning Flow before they can be available for * Commissioning by any Commissioner. For such a flow, the user SHOULD be sent to the URL specified in the * CommissioningCustomFlowUrl of the DeviceModel schema entry indexed by the Vendor ID and Product ID (e.g., as * found in the announcement) in the Distributed Compliance Ledger. */ deviceManufacturerUrl: BitFlag; /** * The Device has been commissioned. Any Administrator that commissioned the device provides a user interface that * may be used to put the device into Commissioning Mode. */ administrator: BitFlag; /** * The settings menu on the Device provides instructions to put it into Commissioning Mode. */ settingsMenuOnNode: BitFlag; /** * The PI key/value pair describes a custom way to put the Device into Commissioning Mode. This Custom Instruction * option is NOT recommended for use by a Device that does not have knowledge of the user’s language preference. */ customInstruction: BitFlag; /** * The Device Manual provides special instructions to put the Device into Commissioning Mode (see Section 11.22.5.8, * “UserManualUrl”). This is a catch-all option to capture user interactions that are not codified by other options * in this table. */ deviceManual: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed. */ pressResetButton: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed when applying power to it. */ pressResetButtonWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed for N seconds. The exact value of N SHALL * be made available via PI key. */ pressResetButtonForNumberOfSeconds: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed until associated light blinks. * Information on color of light MAY be made available via PI key (see Note 1). */ pressResetButtonUntilLightBlinks: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed for N seconds when applying power to it. * The exact value of N SHALL be made available via PI key. */ pressResetButtonForNumberOfSecondsWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed until associated light blinks when * applying power to the Device. Information on color of light MAY be made available via PI key (see Note 1). */ pressResetButtonUntilLightBlinksWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed N times with maximum 1 second between each * press. The exact value of N SHALL be made available via PI key. */ pressResetButtonNumberOfTimes: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed. */ pressSetupButton: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed when applying power to it. */ pressSetupButtonWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed for N seconds. The exact value of N SHALL * be made available via PI key. */ pressSetupButtonForNumberOfSeconds: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed until associated light blinks. * Information on color of light MAY be made available via PI key (see Note 1). */ pressSetupButtonUntilLightBlinks: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed for N seconds when applying power to it. * The exact value of N SHALL be made available via PI key. */ pressSetupButtonForNumberOfSecondsWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed until associated light blinks when * applying power to the Device. Information on color of light MAY be made available via PI key (see Note 1). */ pressSetupButtonUntilLightBlinksWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed N times with maximum 1 second between each * press. The exact value of N SHALL be made available via PI key. */ pressSetupButtonNumberOfTimes: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed and released N times with maximum 1 second * between each press. The exact value of N SHALL be made available via PI key. */ pressAndReleaseSetupButtonNumberOfTimes: BitFlag; /** * The Device will enter Commissioning Mode when a button is pressed for N seconds with an indication (e.g. light * blink). The exact value of N, indication details, and optionally which button(s) SHALL be made available via PI * key. */ pressButtonForNumberOfSecondsWithIndication: BitFlag; /** * The Device will enter Commissioning Mode when power cycled a variable number of times with configurable ON/OFF * durations and an indication. Details SHALL be made available via PI key. */ powerCycleUntilIndication: BitFlag; }; export declare const PairingHintBitmapSchema: import("@matter/types").BitmapSchemaInternal<{ /** * The Device will automatically enter Commissioning Mode upon power cycle (unplug/re- plug, remove/re-insert * batteries). This bit SHALL be set to 1 for devices using Standard Commissioning Flow, and set to 0 otherwise. */ powerCycle: BitFlag; /** * This SHALL be set to 1 for devices requiring Custom Commissioning Flow before they can be available for * Commissioning by any Commissioner. For such a flow, the user SHOULD be sent to the URL specified in the * CommissioningCustomFlowUrl of the DeviceModel schema entry indexed by the Vendor ID and Product ID (e.g., as * found in the announcement) in the Distributed Compliance Ledger. */ deviceManufacturerUrl: BitFlag; /** * The Device has been commissioned. Any Administrator that commissioned the device provides a user interface that * may be used to put the device into Commissioning Mode. */ administrator: BitFlag; /** * The settings menu on the Device provides instructions to put it into Commissioning Mode. */ settingsMenuOnNode: BitFlag; /** * The PI key/value pair describes a custom way to put the Device into Commissioning Mode. This Custom Instruction * option is NOT recommended for use by a Device that does not have knowledge of the user’s language preference. */ customInstruction: BitFlag; /** * The Device Manual provides special instructions to put the Device into Commissioning Mode (see Section 11.22.5.8, * “UserManualUrl”). This is a catch-all option to capture user interactions that are not codified by other options * in this table. */ deviceManual: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed. */ pressResetButton: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed when applying power to it. */ pressResetButtonWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed for N seconds. The exact value of N SHALL * be made available via PI key. */ pressResetButtonForNumberOfSeconds: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed until associated light blinks. * Information on color of light MAY be made available via PI key (see Note 1). */ pressResetButtonUntilLightBlinks: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed for N seconds when applying power to it. * The exact value of N SHALL be made available via PI key. */ pressResetButtonForNumberOfSecondsWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed until associated light blinks when * applying power to the Device. Information on color of light MAY be made available via PI key (see Note 1). */ pressResetButtonUntilLightBlinksWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when reset button is pressed N times with maximum 1 second between each * press. The exact value of N SHALL be made available via PI key. */ pressResetButtonNumberOfTimes: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed. */ pressSetupButton: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed when applying power to it. */ pressSetupButtonWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed for N seconds. The exact value of N SHALL * be made available via PI key. */ pressSetupButtonForNumberOfSeconds: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed until associated light blinks. * Information on color of light MAY be made available via PI key (see Note 1). */ pressSetupButtonUntilLightBlinks: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed for N seconds when applying power to it. * The exact value of N SHALL be made available via PI key. */ pressSetupButtonForNumberOfSecondsWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed until associated light blinks when * applying power to the Device. Information on color of light MAY be made available via PI key (see Note 1). */ pressSetupButtonUntilLightBlinksWithApplicationOfPower: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed N times with maximum 1 second between each * press. The exact value of N SHALL be made available via PI key. */ pressSetupButtonNumberOfTimes: BitFlag; /** * The Device will enter Commissioning Mode when setup button is pressed and released N times with maximum 1 second * between each press. The exact value of N SHALL be made available via PI key. */ pressAndReleaseSetupButtonNumberOfTimes: BitFlag; /** * The Device will enter Commissioning Mode when a button is pressed for N seconds with an indication (e.g. light * blink). The exact value of N, indication details, and optionally which button(s) SHALL be made available via PI * key. */ pressButtonForNumberOfSecondsWithIndication: BitFlag; /** * The Device will enter Commissioning Mode when power cycled a variable number of times with configurable ON/OFF * durations and an indication. Details SHALL be made available via PI key. */ powerCycleUntilIndication: BitFlag; }>; //# sourceMappingURL=PairingHintBitmap.d.ts.map