# @ledgerhq/coin-bitcoin

## 1.3.0

### Minor Changes

- [#24542](https://github.com/LedgerHQ/ledger-live/pull/24542) [`332d615`](https://github.com/LedgerHQ/ledger-live/commit/332d6152b6c11aa923d5fc7f5e16606b5d61a252) Thanks [@may01](https://github.com/may01)! - Give a PSBT output its BIP32 derivation when it pays any account address within the gap limit, not only the next two fresh ones

### Patch Changes

- Updated dependencies [[`4aa3244`](https://github.com/LedgerHQ/ledger-live/commit/4aa32442c63cd17bd2894d63ad0721d51e0ca41a), [`49de732`](https://github.com/LedgerHQ/ledger-live/commit/49de7327915d876c4a98826d561705171c41d2d2), [`5a9de42`](https://github.com/LedgerHQ/ledger-live/commit/5a9de42cd3a598f1f8954d58b9536280f5fd2927), [`120891d`](https://github.com/LedgerHQ/ledger-live/commit/120891d4dbd9e9bba22dbf552f1bbe0ab34685cc), [`51ce5a0`](https://github.com/LedgerHQ/ledger-live/commit/51ce5a05e95dc02ce0eccc5f9d043d556ba43bbf), [`0cf44d5`](https://github.com/LedgerHQ/ledger-live/commit/0cf44d56a449fb0f4448cd6f8e02c880fc47adb2)]:
  - @ledgerhq/types-live@6.132.0
  - @ledgerhq/ledger-wallet-framework@3.12.0
  - @ledgerhq/wallet-btc@1.2.0

## 1.3.0-next.0

### Minor Changes

- [#24542](https://github.com/LedgerHQ/ledger-live/pull/24542) [`332d615`](https://github.com/LedgerHQ/ledger-live/commit/332d6152b6c11aa923d5fc7f5e16606b5d61a252) Thanks [@may01](https://github.com/may01)! - Give a PSBT output its BIP32 derivation when it pays any account address within the gap limit, not only the next two fresh ones

### Patch Changes

- Updated dependencies [[`4aa3244`](https://github.com/LedgerHQ/ledger-live/commit/4aa32442c63cd17bd2894d63ad0721d51e0ca41a), [`49de732`](https://github.com/LedgerHQ/ledger-live/commit/49de7327915d876c4a98826d561705171c41d2d2), [`5a9de42`](https://github.com/LedgerHQ/ledger-live/commit/5a9de42cd3a598f1f8954d58b9536280f5fd2927), [`120891d`](https://github.com/LedgerHQ/ledger-live/commit/120891d4dbd9e9bba22dbf552f1bbe0ab34685cc), [`51ce5a0`](https://github.com/LedgerHQ/ledger-live/commit/51ce5a05e95dc02ce0eccc5f9d043d556ba43bbf), [`0cf44d5`](https://github.com/LedgerHQ/ledger-live/commit/0cf44d56a449fb0f4448cd6f8e02c880fc47adb2)]:
  - @ledgerhq/types-live@6.132.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.12.0-next.0
  - @ledgerhq/wallet-btc@1.2.0

## 1.2.0

### Minor Changes

- [#24226](https://github.com/LedgerHQ/ledger-live/pull/24226) [`d701bc7`](https://github.com/LedgerHQ/ledger-live/commit/d701bc7564f9f479e0cc867ef76ec40b73f5c49c) Thanks [@qperrot](https://github.com/qperrot)! - fix(coin-bitcoin): do not spend the inputs of pending operations

  `prepareTransaction` and `estimateMaxSpendable` exclude the UTXOs spent by the account's own
  pending operations. When the explorer does not report mempool spends, a sync listed them as
  spendable again and the next send was rejected with `txn-mempool-conflict`. An RBF edit keeps
  the inputs of the operation it replaces.

  `addPendingOperation` keeps every pending UTXO operation (those with `extra.inputs`) instead of
  only the latest one, and removes one only when the new operation spends one of its inputs (an RBF
  replacement). Operations of other coins are unchanged.

  `isOldestBitcoinPendingOperation` takes the operation instead of its date: a pending operation
  can be sped up unless it spends an output of another unconfirmed operation of the account. Pending
  sends of unrelated UTXOs no longer block each other's speed-up.

- [#24227](https://github.com/LedgerHQ/ledger-live/pull/24227) [`93aef61`](https://github.com/LedgerHQ/ledger-live/commit/93aef61f00e4e65de92695a983bfbca21e156ccb) Thanks [@qperrot](https://github.com/qperrot)! - fix(coin-bitcoin): keep pending operations until their transaction is mined

  The post-sync reconciliation dropped an optimistic operation as soon as the explorer returned
  its transaction, even unconfirmed. The edit flow then no longer found it in `pendingOperations`
  and only offered to cancel it: speeding up a transaction worked only until the first sync after
  the explorer indexed it. Only mined operations now resolve a pending one.

- [#24488](https://github.com/LedgerHQ/ledger-live/pull/24488) [`3835bab`](https://github.com/LedgerHQ/ledger-live/commit/3835babeb6da9775f5750a2219f480a5422269ab) Thanks [@gre-ledger](https://github.com/gre-ledger)! - chore: upgrade bs58 to 6.0.0 and bs58check to 4.0.0, drop @types/bs58 and @types/bs58check

- [#24500](https://github.com/LedgerHQ/ledger-live/pull/24500) [`6da9b38`](https://github.com/LedgerHQ/ledger-live/commit/6da9b38e20ae18b9aa3e31d41a155420ace9987b) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Bump ts-libs packages (`@ledgerhq/auth` 0.2.0, `@ledgerhq/devices` 8.19.0, `@ledgerhq/domain-service` 1.10.0, `@ledgerhq/evm-tools` 2.1.0, `@ledgerhq/hw-ledger-key-ring-protocol` 1.1.0, `@ledgerhq/hw-transport` 6.37.0, `@ledgerhq/hw-transport-mocker` 6.36.0, `@ledgerhq/ledger-key-ring-protocol` 1.2.0, `@ledgerhq/live-config` 3.10.0, `@ledgerhq/live-currency-format` 0.17.0, `@ledgerhq/live-env` 4.2.0, `@ledgerhq/live-network` 3.3.0, `@ledgerhq/live-promise` 0.5.0, `@ledgerhq/logs` 6.20.0, `@ledgerhq/psbtv2` 0.7.0).

- [#24373](https://github.com/LedgerHQ/ledger-live/pull/24373) [`6ab5a87`](https://github.com/LedgerHQ/ledger-live/commit/6ab5a87d796726b2fc38b34862209abf82521f72) Thanks [@francois-guerin-ledger](https://github.com/francois-guerin-ledger)! - Export the default coin configs from each coin package and wrap them in `ledger-live-common` (ADR-063). `coin-celo` and `coin-cosmos` replace their `celoConfig` and `cosmosConfig` exports, which wrapped the defaults in `ConfigInfo`, with plain typed `celoDefaults` and `cosmosDefaults`; their `features` now use the `status` key instead of `type`, Desmos gets the active status it was missing, and Gonka defaults to a minimum gas price of 1 ngonka

- [#24522](https://github.com/LedgerHQ/ledger-live/pull/24522) [`e67063f`](https://github.com/LedgerHQ/ledger-live/commit/e67063fc1fdb96c419c42a452433870b588f201e) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Import bignumber.js through its default export, the form bignumber.js 11 types support

### Patch Changes

- Updated dependencies [[`b77803f`](https://github.com/LedgerHQ/ledger-live/commit/b77803ffbca90848d55bca56b9d8cd3547464620), [`d701bc7`](https://github.com/LedgerHQ/ledger-live/commit/d701bc7564f9f479e0cc867ef76ec40b73f5c49c), [`d36ed0a`](https://github.com/LedgerHQ/ledger-live/commit/d36ed0a5b624f1842e2ad3a857d502621dfb5fb9), [`3835bab`](https://github.com/LedgerHQ/ledger-live/commit/3835babeb6da9775f5750a2219f480a5422269ab), [`6da9b38`](https://github.com/LedgerHQ/ledger-live/commit/6da9b38e20ae18b9aa3e31d41a155420ace9987b), [`e051c84`](https://github.com/LedgerHQ/ledger-live/commit/e051c84a8486b78327ea49500c38b6e2138bbc21), [`3a0d8aa`](https://github.com/LedgerHQ/ledger-live/commit/3a0d8aa1d4904fa0ccc53528ec092bc32a63dcd4), [`96fac1e`](https://github.com/LedgerHQ/ledger-live/commit/96fac1eb64856beb33cc68594e98c25e8b308898), [`0d83181`](https://github.com/LedgerHQ/ledger-live/commit/0d83181e9a96f55811f2ce5532527739bdb7e62a), [`e186896`](https://github.com/LedgerHQ/ledger-live/commit/e186896213df32feb1e6a80e38f45cf189655866), [`e7b21f8`](https://github.com/LedgerHQ/ledger-live/commit/e7b21f816021dbbe7314ff51bf32cc4d87291b98), [`e67063f`](https://github.com/LedgerHQ/ledger-live/commit/e67063fc1fdb96c419c42a452433870b588f201e), [`d3f59ae`](https://github.com/LedgerHQ/ledger-live/commit/d3f59ae3fc6b9d9240bd81df9f93c1223cb64ddb)]:
  - @ledgerhq/types-live@6.131.0
  - @ledgerhq/ledger-wallet-framework@3.11.0
  - @ledgerhq/wallet-btc@1.2.0

## 1.2.0-next.0

### Minor Changes

- [#24226](https://github.com/LedgerHQ/ledger-live/pull/24226) [`d701bc7`](https://github.com/LedgerHQ/ledger-live/commit/d701bc7564f9f479e0cc867ef76ec40b73f5c49c) Thanks [@qperrot](https://github.com/qperrot)! - fix(coin-bitcoin): do not spend the inputs of pending operations

  `prepareTransaction` and `estimateMaxSpendable` exclude the UTXOs spent by the account's own
  pending operations. When the explorer does not report mempool spends, a sync listed them as
  spendable again and the next send was rejected with `txn-mempool-conflict`. An RBF edit keeps
  the inputs of the operation it replaces.

  `addPendingOperation` keeps every pending UTXO operation (those with `extra.inputs`) instead of
  only the latest one, and removes one only when the new operation spends one of its inputs (an RBF
  replacement). Operations of other coins are unchanged.

  `isOldestBitcoinPendingOperation` takes the operation instead of its date: a pending operation
  can be sped up unless it spends an output of another unconfirmed operation of the account. Pending
  sends of unrelated UTXOs no longer block each other's speed-up.

- [#24227](https://github.com/LedgerHQ/ledger-live/pull/24227) [`93aef61`](https://github.com/LedgerHQ/ledger-live/commit/93aef61f00e4e65de92695a983bfbca21e156ccb) Thanks [@qperrot](https://github.com/qperrot)! - fix(coin-bitcoin): keep pending operations until their transaction is mined

  The post-sync reconciliation dropped an optimistic operation as soon as the explorer returned
  its transaction, even unconfirmed. The edit flow then no longer found it in `pendingOperations`
  and only offered to cancel it: speeding up a transaction worked only until the first sync after
  the explorer indexed it. Only mined operations now resolve a pending one.

- [#24488](https://github.com/LedgerHQ/ledger-live/pull/24488) [`3835bab`](https://github.com/LedgerHQ/ledger-live/commit/3835babeb6da9775f5750a2219f480a5422269ab) Thanks [@gre-ledger](https://github.com/gre-ledger)! - chore: upgrade bs58 to 6.0.0 and bs58check to 4.0.0, drop @types/bs58 and @types/bs58check

- [#24500](https://github.com/LedgerHQ/ledger-live/pull/24500) [`6da9b38`](https://github.com/LedgerHQ/ledger-live/commit/6da9b38e20ae18b9aa3e31d41a155420ace9987b) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Bump ts-libs packages (`@ledgerhq/auth` 0.2.0, `@ledgerhq/devices` 8.19.0, `@ledgerhq/domain-service` 1.10.0, `@ledgerhq/evm-tools` 2.1.0, `@ledgerhq/hw-ledger-key-ring-protocol` 1.1.0, `@ledgerhq/hw-transport` 6.37.0, `@ledgerhq/hw-transport-mocker` 6.36.0, `@ledgerhq/ledger-key-ring-protocol` 1.2.0, `@ledgerhq/live-config` 3.10.0, `@ledgerhq/live-currency-format` 0.17.0, `@ledgerhq/live-env` 4.2.0, `@ledgerhq/live-network` 3.3.0, `@ledgerhq/live-promise` 0.5.0, `@ledgerhq/logs` 6.20.0, `@ledgerhq/psbtv2` 0.7.0).

- [#24373](https://github.com/LedgerHQ/ledger-live/pull/24373) [`6ab5a87`](https://github.com/LedgerHQ/ledger-live/commit/6ab5a87d796726b2fc38b34862209abf82521f72) Thanks [@francois-guerin-ledger](https://github.com/francois-guerin-ledger)! - Export the default coin configs from each coin package and wrap them in `ledger-live-common` (ADR-063). `coin-celo` and `coin-cosmos` replace their `celoConfig` and `cosmosConfig` exports, which wrapped the defaults in `ConfigInfo`, with plain typed `celoDefaults` and `cosmosDefaults`; their `features` now use the `status` key instead of `type`, Desmos gets the active status it was missing, and Gonka defaults to a minimum gas price of 1 ngonka

- [#24522](https://github.com/LedgerHQ/ledger-live/pull/24522) [`e67063f`](https://github.com/LedgerHQ/ledger-live/commit/e67063fc1fdb96c419c42a452433870b588f201e) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Import bignumber.js through its default export, the form bignumber.js 11 types support

### Patch Changes

- Updated dependencies [[`b77803f`](https://github.com/LedgerHQ/ledger-live/commit/b77803ffbca90848d55bca56b9d8cd3547464620), [`d701bc7`](https://github.com/LedgerHQ/ledger-live/commit/d701bc7564f9f479e0cc867ef76ec40b73f5c49c), [`d36ed0a`](https://github.com/LedgerHQ/ledger-live/commit/d36ed0a5b624f1842e2ad3a857d502621dfb5fb9), [`3835bab`](https://github.com/LedgerHQ/ledger-live/commit/3835babeb6da9775f5750a2219f480a5422269ab), [`6da9b38`](https://github.com/LedgerHQ/ledger-live/commit/6da9b38e20ae18b9aa3e31d41a155420ace9987b), [`e051c84`](https://github.com/LedgerHQ/ledger-live/commit/e051c84a8486b78327ea49500c38b6e2138bbc21), [`3a0d8aa`](https://github.com/LedgerHQ/ledger-live/commit/3a0d8aa1d4904fa0ccc53528ec092bc32a63dcd4), [`96fac1e`](https://github.com/LedgerHQ/ledger-live/commit/96fac1eb64856beb33cc68594e98c25e8b308898), [`0d83181`](https://github.com/LedgerHQ/ledger-live/commit/0d83181e9a96f55811f2ce5532527739bdb7e62a), [`e186896`](https://github.com/LedgerHQ/ledger-live/commit/e186896213df32feb1e6a80e38f45cf189655866), [`e7b21f8`](https://github.com/LedgerHQ/ledger-live/commit/e7b21f816021dbbe7314ff51bf32cc4d87291b98), [`e67063f`](https://github.com/LedgerHQ/ledger-live/commit/e67063fc1fdb96c419c42a452433870b588f201e), [`d3f59ae`](https://github.com/LedgerHQ/ledger-live/commit/d3f59ae3fc6b9d9240bd81df9f93c1223cb64ddb)]:
  - @ledgerhq/types-live@6.131.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.11.0-next.0
  - @ledgerhq/wallet-btc@1.2.0-next.0

## 1.1.1

### Patch Changes

- Updated dependencies [[`9907890`](https://github.com/LedgerHQ/ledger-live/commit/9907890790bf8b804d7cc454a067508df0969137), [`8854aff`](https://github.com/LedgerHQ/ledger-live/commit/8854aff9cace72ad17c6d9fd7ee98a4dcd65ecb1), [`77a85a3`](https://github.com/LedgerHQ/ledger-live/commit/77a85a30abe7b42e5f5b4e0478bec14fa39033cf), [`c50f3fa`](https://github.com/LedgerHQ/ledger-live/commit/c50f3fac1c822d61332dbb512b21cdda6bb57210)]:
  - @ledgerhq/types-live@6.130.0
  - @ledgerhq/ledger-wallet-framework@3.10.0
  - @ledgerhq/wallet-btc@1.1.0

## 1.1.1-next.0

### Patch Changes

- Updated dependencies [[`9907890`](https://github.com/LedgerHQ/ledger-live/commit/9907890790bf8b804d7cc454a067508df0969137), [`8854aff`](https://github.com/LedgerHQ/ledger-live/commit/8854aff9cace72ad17c6d9fd7ee98a4dcd65ecb1), [`77a85a3`](https://github.com/LedgerHQ/ledger-live/commit/77a85a30abe7b42e5f5b4e0478bec14fa39033cf), [`c50f3fa`](https://github.com/LedgerHQ/ledger-live/commit/c50f3fac1c822d61332dbb512b21cdda6bb57210)]:
  - @ledgerhq/types-live@6.130.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.10.0-next.0
  - @ledgerhq/wallet-btc@1.1.0

## 1.1.0

### Minor Changes

- [#23988](https://github.com/LedgerHQ/ledger-live/pull/23988) [`d37d80e`](https://github.com/LedgerHQ/ledger-live/commit/d37d80e128d89fcd80630fd4ef13c66587e3bebe) Thanks [@francois-guerin-ledger](https://github.com/francois-guerin-ledger)! - Bump `bitcoinjs-lib` to 7.0.5 and `bip39` to 3.1.2

- [#23708](https://github.com/LedgerHQ/ledger-live/pull/23708) [`dd056b8`](https://github.com/LedgerHQ/ledger-live/commit/dd056b8a4c6c7c28879cfb1c44139b2479281987) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Bump ts-libs packages (`@ledgerhq/auth` 0.1.1, `@ledgerhq/devices` 8.18.1, `@ledgerhq/hw-transport` 6.36.1, `@ledgerhq/hw-transport-mocker` 6.35.1, `@ledgerhq/hw-ledger-key-ring-protocol` 1.0.1, `@ledgerhq/ledger-key-ring-protocol` 1.1.0, `@ledgerhq/live-config` 3.9.1, `@ledgerhq/psbtv2` 0.6.2), `zod` 4.6.7, `semver` 7.8.5, `lodash` 4.18.1, and catalog `bitcoinjs-lib` 7.0.4.

- [#23465](https://github.com/LedgerHQ/ledger-live/pull/23465) [`c4b7982`](https://github.com/LedgerHQ/ledger-live/commit/c4b79825af9468fbb8f5325e77e47536d6b392e9) Thanks [@ysitbon](https://github.com/ysitbon)! - chore(coin): prefix unused parameters with an underscore

  The packages now build with `noUnusedLocals` and `noUnusedParameters`. The parameters they never read are renamed with a leading underscore; signatures and behaviour are unchanged.

- [#23846](https://github.com/LedgerHQ/ledger-live/pull/23846) [`29ae68a`](https://github.com/LedgerHQ/ledger-live/commit/29ae68a1ad2429a224106f355f35d1190c0f7359) Thanks [@gre-ledger](https://github.com/gre-ledger)! - fix: ship lib and lib-es in the npm tarballs again, which pnpm 11 dropped

### Patch Changes

- Updated dependencies [[`d37d80e`](https://github.com/LedgerHQ/ledger-live/commit/d37d80e128d89fcd80630fd4ef13c66587e3bebe), [`dd056b8`](https://github.com/LedgerHQ/ledger-live/commit/dd056b8a4c6c7c28879cfb1c44139b2479281987), [`c4b7982`](https://github.com/LedgerHQ/ledger-live/commit/c4b79825af9468fbb8f5325e77e47536d6b392e9), [`8c888c4`](https://github.com/LedgerHQ/ledger-live/commit/8c888c4cfd699dc24b8e0522818feaac98698eb1), [`29ae68a`](https://github.com/LedgerHQ/ledger-live/commit/29ae68a1ad2429a224106f355f35d1190c0f7359), [`9c7d59d`](https://github.com/LedgerHQ/ledger-live/commit/9c7d59d0ffcc72ba746bc20e9ff744db9730503b)]:
  - @ledgerhq/wallet-btc@1.1.0
  - @ledgerhq/ledger-wallet-framework@3.9.0
  - @ledgerhq/types-live@6.129.0

## 1.1.0-next.0

### Minor Changes

- [#23988](https://github.com/LedgerHQ/ledger-live/pull/23988) [`d37d80e`](https://github.com/LedgerHQ/ledger-live/commit/d37d80e128d89fcd80630fd4ef13c66587e3bebe) Thanks [@francois-guerin-ledger](https://github.com/francois-guerin-ledger)! - Bump `bitcoinjs-lib` to 7.0.5 and `bip39` to 3.1.2

- [#23708](https://github.com/LedgerHQ/ledger-live/pull/23708) [`dd056b8`](https://github.com/LedgerHQ/ledger-live/commit/dd056b8a4c6c7c28879cfb1c44139b2479281987) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Bump ts-libs packages (`@ledgerhq/auth` 0.1.1, `@ledgerhq/devices` 8.18.1, `@ledgerhq/hw-transport` 6.36.1, `@ledgerhq/hw-transport-mocker` 6.35.1, `@ledgerhq/hw-ledger-key-ring-protocol` 1.0.1, `@ledgerhq/ledger-key-ring-protocol` 1.1.0, `@ledgerhq/live-config` 3.9.1, `@ledgerhq/psbtv2` 0.6.2), `zod` 4.6.7, `semver` 7.8.5, `lodash` 4.18.1, and catalog `bitcoinjs-lib` 7.0.4.

- [#23465](https://github.com/LedgerHQ/ledger-live/pull/23465) [`c4b7982`](https://github.com/LedgerHQ/ledger-live/commit/c4b79825af9468fbb8f5325e77e47536d6b392e9) Thanks [@ysitbon](https://github.com/ysitbon)! - chore(coin): prefix unused parameters with an underscore

  The packages now build with `noUnusedLocals` and `noUnusedParameters`. The parameters they never read are renamed with a leading underscore; signatures and behaviour are unchanged.

- [#23846](https://github.com/LedgerHQ/ledger-live/pull/23846) [`29ae68a`](https://github.com/LedgerHQ/ledger-live/commit/29ae68a1ad2429a224106f355f35d1190c0f7359) Thanks [@gre-ledger](https://github.com/gre-ledger)! - fix: ship lib and lib-es in the npm tarballs again, which pnpm 11 dropped

### Patch Changes

- Updated dependencies [[`d37d80e`](https://github.com/LedgerHQ/ledger-live/commit/d37d80e128d89fcd80630fd4ef13c66587e3bebe), [`dd056b8`](https://github.com/LedgerHQ/ledger-live/commit/dd056b8a4c6c7c28879cfb1c44139b2479281987), [`c4b7982`](https://github.com/LedgerHQ/ledger-live/commit/c4b79825af9468fbb8f5325e77e47536d6b392e9), [`8c888c4`](https://github.com/LedgerHQ/ledger-live/commit/8c888c4cfd699dc24b8e0522818feaac98698eb1), [`29ae68a`](https://github.com/LedgerHQ/ledger-live/commit/29ae68a1ad2429a224106f355f35d1190c0f7359), [`9c7d59d`](https://github.com/LedgerHQ/ledger-live/commit/9c7d59d0ffcc72ba746bc20e9ff744db9730503b)]:
  - @ledgerhq/wallet-btc@1.1.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.9.0-next.0
  - @ledgerhq/types-live@6.129.0-next.0

## 1.0.0

### Major Changes

- [#22964](https://github.com/LedgerHQ/ledger-live/pull/22964) [`ca063c4`](https://github.com/LedgerHQ/ledger-live/commit/ca063c4cfad79f12118c5af5bc0ef323857f90bd) Thanks [@francois-guerin-ledger](https://github.com/francois-guerin-ledger)! - refactor(wallet-btc): inject `logger` instead of using `@ledgerhq/logs`

### Minor Changes

- [#23283](https://github.com/LedgerHQ/ledger-live/pull/23283) [`d2b8471`](https://github.com/LedgerHQ/ledger-live/commit/d2b84711b137f42930f006f7a079fc104c92633d) Thanks [@cted-ledger](https://github.com/cted-ledger)! - remove the zcash code, now served by coin-zcash: the zcash chain adapter, the chain adapter mechanism it was the only user of, `hw-getFullViewingKey` and the zcash network, fee and signing branches

- [#23046](https://github.com/LedgerHQ/ledger-live/pull/23046) [`7b3040a`](https://github.com/LedgerHQ/ledger-live/commit/7b3040ad872c183fd2beb81a965037b5310ab87a) Thanks [@qperrot](https://github.com/qperrot)! - feat(coin-bitcoin): add a stateless single-address alpaca api (balance, history, blocks, fees, crafting, combine, intent validation, broadcast) for every bitcoin-family currency, with the hw-app-btc createPaymentTransaction parameters of what it crafts; each currency's transaction and address format comes from its coin config; dash and qtum get an explicit explorerId. `validateAddress` moves to `@ledgerhq/coin-bitcoin/logic/validateAddress` (the root `@ledgerhq/coin-bitcoin/validateAddress` subpath is removed)

- [#23214](https://github.com/LedgerHQ/ledger-live/pull/23214) [`b599cb2`](https://github.com/LedgerHQ/ledger-live/commit/b599cb25afbc5ce2dbdcd0cc1b6126a49bba8068) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Migrate bitcoinjs-lib to v7 (Uint8Array, bigint amounts) and varuint-bitcoin to v2

- [#23108](https://github.com/LedgerHQ/ledger-live/pull/23108) [`bcea51b`](https://github.com/LedgerHQ/ledger-live/commit/bcea51b0b2c9ef09b9e068f97ed3c67a0e45e188) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Bump `@noble/curves` to 2.4.0 (ESM-only), use the `.js` subpaths and pass `prehash: false` where a digest is signed or verified. CommonJS consumers of `@ledgerhq/hw-app-btc` and `@ledgerhq/wallet-btc` now need Node >= 20.19 (synchronous `require(esm)`) or an ESM-capable bundler.

### Patch Changes

- Updated dependencies [[`b599cb2`](https://github.com/LedgerHQ/ledger-live/commit/b599cb25afbc5ce2dbdcd0cc1b6126a49bba8068), [`80f99a8`](https://github.com/LedgerHQ/ledger-live/commit/80f99a819b13d3ec2bd39d896de46e0a433b9954), [`f40b1c2`](https://github.com/LedgerHQ/ledger-live/commit/f40b1c20948a5c7921796926f620201f1bb8d574), [`75498cf`](https://github.com/LedgerHQ/ledger-live/commit/75498cf55065bccf17d09b780866ae031c01701a), [`e66d21e`](https://github.com/LedgerHQ/ledger-live/commit/e66d21ea7ccb706d718703b69d2133ede3294c1a), [`bcea51b`](https://github.com/LedgerHQ/ledger-live/commit/bcea51b0b2c9ef09b9e068f97ed3c67a0e45e188), [`98c994b`](https://github.com/LedgerHQ/ledger-live/commit/98c994bc1f46a03366096531afac2471f07f397b), [`ca063c4`](https://github.com/LedgerHQ/ledger-live/commit/ca063c4cfad79f12118c5af5bc0ef323857f90bd), [`696357f`](https://github.com/LedgerHQ/ledger-live/commit/696357f754751853758d67c88bf34df9302b9b97)]:
  - @ledgerhq/wallet-btc@1.0.0
  - @ledgerhq/ledger-wallet-framework@3.8.0
  - @ledgerhq/types-live@6.128.0

## 1.0.0-next.0

### Major Changes

- [#22964](https://github.com/LedgerHQ/ledger-live/pull/22964) [`ca063c4`](https://github.com/LedgerHQ/ledger-live/commit/ca063c4cfad79f12118c5af5bc0ef323857f90bd) Thanks [@francois-guerin-ledger](https://github.com/francois-guerin-ledger)! - refactor(wallet-btc): inject `logger` instead of using `@ledgerhq/logs`

### Minor Changes

- [#23283](https://github.com/LedgerHQ/ledger-live/pull/23283) [`d2b8471`](https://github.com/LedgerHQ/ledger-live/commit/d2b84711b137f42930f006f7a079fc104c92633d) Thanks [@cted-ledger](https://github.com/cted-ledger)! - remove the zcash code, now served by coin-zcash: the zcash chain adapter, the chain adapter mechanism it was the only user of, `hw-getFullViewingKey` and the zcash network, fee and signing branches

- [#23046](https://github.com/LedgerHQ/ledger-live/pull/23046) [`7b3040a`](https://github.com/LedgerHQ/ledger-live/commit/7b3040ad872c183fd2beb81a965037b5310ab87a) Thanks [@qperrot](https://github.com/qperrot)! - feat(coin-bitcoin): add a stateless single-address alpaca api (balance, history, blocks, fees, crafting, combine, intent validation, broadcast) for every bitcoin-family currency, with the hw-app-btc createPaymentTransaction parameters of what it crafts; each currency's transaction and address format comes from its coin config; dash and qtum get an explicit explorerId. `validateAddress` moves to `@ledgerhq/coin-bitcoin/logic/validateAddress` (the root `@ledgerhq/coin-bitcoin/validateAddress` subpath is removed)

- [#23214](https://github.com/LedgerHQ/ledger-live/pull/23214) [`b599cb2`](https://github.com/LedgerHQ/ledger-live/commit/b599cb25afbc5ce2dbdcd0cc1b6126a49bba8068) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Migrate bitcoinjs-lib to v7 (Uint8Array, bigint amounts) and varuint-bitcoin to v2

- [#23108](https://github.com/LedgerHQ/ledger-live/pull/23108) [`bcea51b`](https://github.com/LedgerHQ/ledger-live/commit/bcea51b0b2c9ef09b9e068f97ed3c67a0e45e188) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Bump `@noble/curves` to 2.4.0 (ESM-only), use the `.js` subpaths and pass `prehash: false` where a digest is signed or verified. CommonJS consumers of `@ledgerhq/hw-app-btc` and `@ledgerhq/wallet-btc` now need Node >= 20.19 (synchronous `require(esm)`) or an ESM-capable bundler.

### Patch Changes

- Updated dependencies [[`b599cb2`](https://github.com/LedgerHQ/ledger-live/commit/b599cb25afbc5ce2dbdcd0cc1b6126a49bba8068), [`80f99a8`](https://github.com/LedgerHQ/ledger-live/commit/80f99a819b13d3ec2bd39d896de46e0a433b9954), [`f40b1c2`](https://github.com/LedgerHQ/ledger-live/commit/f40b1c20948a5c7921796926f620201f1bb8d574), [`75498cf`](https://github.com/LedgerHQ/ledger-live/commit/75498cf55065bccf17d09b780866ae031c01701a), [`e66d21e`](https://github.com/LedgerHQ/ledger-live/commit/e66d21ea7ccb706d718703b69d2133ede3294c1a), [`bcea51b`](https://github.com/LedgerHQ/ledger-live/commit/bcea51b0b2c9ef09b9e068f97ed3c67a0e45e188), [`98c994b`](https://github.com/LedgerHQ/ledger-live/commit/98c994bc1f46a03366096531afac2471f07f397b), [`ca063c4`](https://github.com/LedgerHQ/ledger-live/commit/ca063c4cfad79f12118c5af5bc0ef323857f90bd), [`696357f`](https://github.com/LedgerHQ/ledger-live/commit/696357f754751853758d67c88bf34df9302b9b97)]:
  - @ledgerhq/wallet-btc@1.0.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.8.0-next.0
  - @ledgerhq/types-live@6.128.0-next.0

## 0.55.0

### Minor Changes

- [#23189](https://github.com/LedgerHQ/ledger-live/pull/23189) [`d6e7695`](https://github.com/LedgerHQ/ledger-live/commit/d6e7695bf15852c7b0cd2a97aa0a3a0c4d047d74) Thanks [@cted-ledger](https://github.com/cted-ledger)! - serve the zcash testnet currency through the zcash chain adapter and network parameters

- [#22759](https://github.com/LedgerHQ/ledger-live/pull/22759) [`bf29f88`](https://github.com/LedgerHQ/ledger-live/commit/bf29f888316e5d8d9049b763a8c77ce9850f07df) Thanks [@qperrot](https://github.com/qperrot)! - fix(coin-bitcoin): read the explorer and tuning values from the injected coin config

  The module no longer keeps configuration in module state. `createBridges` takes a `Context`
  (ADR-019) and every bridge method resolves `config_currency_<id>` from `context.config()` at call
  time. The endpoint `explorer.url` is required and defaults to today's production host in each
  served `config_currency_<id>` (`http://localhost:9876` for `bitcoin_regtest`, whose `btc_regtest`
  explorer id also moves to its config). The optional fields fall back to named module defaults:
  `explorer.batchSize` (`DEFAULT_EXPLORER_BATCH_SIZE`, 1000), `fees.stuckTransactionTimeoutMs`
  (`DEFAULT_STUCK_TRANSACTION_TIMEOUT_MS`, 20 min), `fees.rbfMinBumpRatio`
  (`DEFAULT_RBF_MIN_BUMP_RATIO`, 0.1), `fees.calculationCacheTtlMs` and `fees.feeRatesCacheTtlMs`
  (5 min each) and `sync.replacedOperationExpiryMs` (`DEFAULT_REPLACED_OPERATION_EXPIRY_MS`, 2 h).
  The explorer is bound to a wallet-btc account from the config at use, so deserialization stays
  config-free and a remote change applies on the next call. wallet-btc still reads no configuration:
  the batch size is injected through `WalletBtcCurrency.explorerBatchSize`, and the RBF ratio and
  the unconfirmed-operation expiry are parameters.

  Breaking: `createBridges(signerContext, context)` takes a `Context` instead of a config getter;
  `setCoinConfig`, `getCoinConfig`, `CoinConfig`, `BitcoinConfigInfo`, `makeAssignFromAccountRaw`
  and `getMinRelayFee` are removed in favour of `BitcoinCoinConfig` / `BitcoinContext` and
  `assignFromAccountRaw`, and `postSync` becomes `makePostSync(context)`. The module logs only
  through `context.logger`: `buildTransaction`, `getTransactionStatus`, `prepareTransaction`,
  `calculateFees`, `signAccountTx`, `ChainAdapter.resolveFeePerByte`, `buildSignRawOperation` and the
  `hw-getAddress` / `hw-getFullViewingKey` resolvers take a `Logger`. `prepareTransaction`, `getTransactionStatus`, `buildTransaction`,
  `buildAccountTx`, `getOriginalTxFeeContext`, `getMinReplacementFeeSat`,
  `getMinReplacementFeeRateSatVb` and `getRbfContext` take the coin config as first parameter. The
  `getEditTransactionStatus` and `isStrategyDisabled` bridge extensions require the `mainAccount`. The `EXPLORER_REGTEST` and `BITCOIN_STUCK_TRANSACTION_TIMEOUT` envs are
  removed, as are the `config_currency_<id>` defaults of the bitcoin-family currencies no loader
  serves (`bitcoin_private`, `game_credits`, `gochain`, `lbry`, `nix`, `ravencoin`, `resistance`,
  `zclassic`, `zcoin`).

### Patch Changes

- Updated dependencies [[`6e3211f`](https://github.com/LedgerHQ/ledger-live/commit/6e3211f6c887211d4ecfbf58d909f49c31df6179), [`20484ff`](https://github.com/LedgerHQ/ledger-live/commit/20484ff8d7cc0aab2e4b8448c7e8ce9ebf6840fe), [`f047501`](https://github.com/LedgerHQ/ledger-live/commit/f047501381efde857b48c1314d2de637fdce8ade), [`bf29f88`](https://github.com/LedgerHQ/ledger-live/commit/bf29f888316e5d8d9049b763a8c77ce9850f07df), [`3347eb8`](https://github.com/LedgerHQ/ledger-live/commit/3347eb88f282e2286b43493dadb0a9dd3d1f81d5), [`90e805d`](https://github.com/LedgerHQ/ledger-live/commit/90e805d9c1b0ef536d1e53489c73b88056731993), [`9c9cae5`](https://github.com/LedgerHQ/ledger-live/commit/9c9cae5ab492b74d52b13e0a5b0673bd681f8d9d), [`2989e37`](https://github.com/LedgerHQ/ledger-live/commit/2989e37b80b8bfcaae549cc02aa6de189a69dfef), [`6f2ecf8`](https://github.com/LedgerHQ/ledger-live/commit/6f2ecf89dd1d978038f573738d6e85fe1805b5d9), [`18166fb`](https://github.com/LedgerHQ/ledger-live/commit/18166fbe8719d50c911aa0ab349e68c414f8fc62), [`dce4fb6`](https://github.com/LedgerHQ/ledger-live/commit/dce4fb6a4ec291153cc5b4d5a0d5000f777007e1), [`2b2eee6`](https://github.com/LedgerHQ/ledger-live/commit/2b2eee6a4abfb86615f3e5a628f518b5a9c58dad), [`6d744e0`](https://github.com/LedgerHQ/ledger-live/commit/6d744e0d30b4480282d35c359d096f3f6d6602af), [`bcd25fd`](https://github.com/LedgerHQ/ledger-live/commit/bcd25fd87bda9e7e8b7c3ee2a243d3e241adc0b0), [`91ac227`](https://github.com/LedgerHQ/ledger-live/commit/91ac22740fbf677ca481382eb55d2e4e12336d2a), [`f482212`](https://github.com/LedgerHQ/ledger-live/commit/f48221278738b5b3accf7199c23e6dd84c48c27e), [`8312d68`](https://github.com/LedgerHQ/ledger-live/commit/8312d6818aa5fa37f523352f81f51a61dd502bf2), [`c5c2815`](https://github.com/LedgerHQ/ledger-live/commit/c5c2815ec53dbf88804e558952f1451f13c37bb4)]:
  - @ledgerhq/wallet-btc@0.7.0
  - @ledgerhq/ledger-wallet-framework@3.7.0
  - @ledgerhq/types-live@6.127.0
  - @ledgerhq/live-signer-zcash@0.10.0

## 0.55.0-next.1

### Patch Changes

- Updated dependencies [[`2989e37`](https://github.com/LedgerHQ/ledger-live/commit/2989e37b80b8bfcaae549cc02aa6de189a69dfef)]:
  - @ledgerhq/ledger-wallet-framework@3.7.0-next.1
  - @ledgerhq/wallet-btc@0.7.0-next.0

## 0.55.0-next.0

### Minor Changes

- [#23189](https://github.com/LedgerHQ/ledger-live/pull/23189) [`d6e7695`](https://github.com/LedgerHQ/ledger-live/commit/d6e7695bf15852c7b0cd2a97aa0a3a0c4d047d74) Thanks [@cted-ledger](https://github.com/cted-ledger)! - serve the zcash testnet currency through the zcash chain adapter and network parameters

- [#22759](https://github.com/LedgerHQ/ledger-live/pull/22759) [`bf29f88`](https://github.com/LedgerHQ/ledger-live/commit/bf29f888316e5d8d9049b763a8c77ce9850f07df) Thanks [@qperrot](https://github.com/qperrot)! - fix(coin-bitcoin): read the explorer and tuning values from the injected coin config

  The module no longer keeps configuration in module state. `createBridges` takes a `Context`
  (ADR-019) and every bridge method resolves `config_currency_<id>` from `context.config()` at call
  time. The endpoint `explorer.url` is required and defaults to today's production host in each
  served `config_currency_<id>` (`http://localhost:9876` for `bitcoin_regtest`, whose `btc_regtest`
  explorer id also moves to its config). The optional fields fall back to named module defaults:
  `explorer.batchSize` (`DEFAULT_EXPLORER_BATCH_SIZE`, 1000), `fees.stuckTransactionTimeoutMs`
  (`DEFAULT_STUCK_TRANSACTION_TIMEOUT_MS`, 20 min), `fees.rbfMinBumpRatio`
  (`DEFAULT_RBF_MIN_BUMP_RATIO`, 0.1), `fees.calculationCacheTtlMs` and `fees.feeRatesCacheTtlMs`
  (5 min each) and `sync.replacedOperationExpiryMs` (`DEFAULT_REPLACED_OPERATION_EXPIRY_MS`, 2 h).
  The explorer is bound to a wallet-btc account from the config at use, so deserialization stays
  config-free and a remote change applies on the next call. wallet-btc still reads no configuration:
  the batch size is injected through `WalletBtcCurrency.explorerBatchSize`, and the RBF ratio and
  the unconfirmed-operation expiry are parameters.

  Breaking: `createBridges(signerContext, context)` takes a `Context` instead of a config getter;
  `setCoinConfig`, `getCoinConfig`, `CoinConfig`, `BitcoinConfigInfo`, `makeAssignFromAccountRaw`
  and `getMinRelayFee` are removed in favour of `BitcoinCoinConfig` / `BitcoinContext` and
  `assignFromAccountRaw`, and `postSync` becomes `makePostSync(context)`. The module logs only
  through `context.logger`: `buildTransaction`, `getTransactionStatus`, `prepareTransaction`,
  `calculateFees`, `signAccountTx`, `ChainAdapter.resolveFeePerByte`, `buildSignRawOperation` and the
  `hw-getAddress` / `hw-getFullViewingKey` resolvers take a `Logger`. `prepareTransaction`, `getTransactionStatus`, `buildTransaction`,
  `buildAccountTx`, `getOriginalTxFeeContext`, `getMinReplacementFeeSat`,
  `getMinReplacementFeeRateSatVb` and `getRbfContext` take the coin config as first parameter. The
  `getEditTransactionStatus` and `isStrategyDisabled` bridge extensions require the `mainAccount`. The `EXPLORER_REGTEST` and `BITCOIN_STUCK_TRANSACTION_TIMEOUT` envs are
  removed, as are the `config_currency_<id>` defaults of the bitcoin-family currencies no loader
  serves (`bitcoin_private`, `game_credits`, `gochain`, `lbry`, `nix`, `ravencoin`, `resistance`,
  `zclassic`, `zcoin`).

### Patch Changes

- Updated dependencies [[`6e3211f`](https://github.com/LedgerHQ/ledger-live/commit/6e3211f6c887211d4ecfbf58d909f49c31df6179), [`20484ff`](https://github.com/LedgerHQ/ledger-live/commit/20484ff8d7cc0aab2e4b8448c7e8ce9ebf6840fe), [`f047501`](https://github.com/LedgerHQ/ledger-live/commit/f047501381efde857b48c1314d2de637fdce8ade), [`bf29f88`](https://github.com/LedgerHQ/ledger-live/commit/bf29f888316e5d8d9049b763a8c77ce9850f07df), [`3347eb8`](https://github.com/LedgerHQ/ledger-live/commit/3347eb88f282e2286b43493dadb0a9dd3d1f81d5), [`90e805d`](https://github.com/LedgerHQ/ledger-live/commit/90e805d9c1b0ef536d1e53489c73b88056731993), [`9c9cae5`](https://github.com/LedgerHQ/ledger-live/commit/9c9cae5ab492b74d52b13e0a5b0673bd681f8d9d), [`6f2ecf8`](https://github.com/LedgerHQ/ledger-live/commit/6f2ecf89dd1d978038f573738d6e85fe1805b5d9), [`18166fb`](https://github.com/LedgerHQ/ledger-live/commit/18166fbe8719d50c911aa0ab349e68c414f8fc62), [`dce4fb6`](https://github.com/LedgerHQ/ledger-live/commit/dce4fb6a4ec291153cc5b4d5a0d5000f777007e1), [`2b2eee6`](https://github.com/LedgerHQ/ledger-live/commit/2b2eee6a4abfb86615f3e5a628f518b5a9c58dad), [`6d744e0`](https://github.com/LedgerHQ/ledger-live/commit/6d744e0d30b4480282d35c359d096f3f6d6602af), [`bcd25fd`](https://github.com/LedgerHQ/ledger-live/commit/bcd25fd87bda9e7e8b7c3ee2a243d3e241adc0b0), [`91ac227`](https://github.com/LedgerHQ/ledger-live/commit/91ac22740fbf677ca481382eb55d2e4e12336d2a), [`f482212`](https://github.com/LedgerHQ/ledger-live/commit/f48221278738b5b3accf7199c23e6dd84c48c27e), [`8312d68`](https://github.com/LedgerHQ/ledger-live/commit/8312d6818aa5fa37f523352f81f51a61dd502bf2), [`c5c2815`](https://github.com/LedgerHQ/ledger-live/commit/c5c2815ec53dbf88804e558952f1451f13c37bb4)]:
  - @ledgerhq/wallet-btc@0.7.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.7.0-next.0
  - @ledgerhq/types-live@6.127.0-next.0
  - @ledgerhq/live-signer-zcash@0.10.0

## 0.54.0

### Minor Changes

- [#22561](https://github.com/LedgerHQ/ledger-live/pull/22561) [`f1d8aac`](https://github.com/LedgerHQ/ledger-live/commit/f1d8aac1c7c0bc0be9beb1508c1a9ef3cf7affae) Thanks [@YazhuEth](https://github.com/YazhuEth)! - chore(currency): drop `CryptoCurrency#bitcoinLikeInfo`

  coin-bitcoin now reads the xpub version from its own `getNetworkParameters`, and coin-zcash from a local `ZCASH_XPUB_VERSION` constant. The unused `bitcoinLikeInfo` field (and `BitcoinLikeInfoSchema`) is removed from the currency types and registry.

- [#21953](https://github.com/LedgerHQ/ledger-live/pull/21953) [`381bd0b`](https://github.com/LedgerHQ/ledger-live/commit/381bd0befb6a09f20f13f65c233f0e1479e7051d) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Consume `@ledgerhq/live-config`, `@ledgerhq/live-env`, `@ledgerhq/live-currency-format`,
  `@ledgerhq/domain-service` and `@ledgerhq/evm-tools` from npm instead of the workspace — they
  now live in the `ts-libs` repository. No API change.

- [#22589](https://github.com/LedgerHQ/ledger-live/pull/22589) [`a896fca`](https://github.com/LedgerHQ/ledger-live/commit/a896fca1974a46f10e915d1212e0947e2d808ad5) Thanks [@qperrot](https://github.com/qperrot)! - Remove the deprecated `CryptoCurrency.explorerId` field and the `LedgerExplorerId` type.

  Bitcoin-like explorer ids now come from the coin config (`config_currency_<id>.explorerId`), as EVM already does, and fall back to the currency id. The config is passed in rather than read from a module global: `toWalletBtcCurrency`, `walletBtcCurrencyById` and coin-bitcoin's `blockchainBaseURL` take it as an argument, the sync functions take the `coinConfig` resolver given to `createBridges`, and `assignFromAccountRaw` is now built with `makeAssignFromAccountRaw(coinConfig)`.

  Adds `config_currency_bitcoin_testnet`, `config_currency_bitcoin_regtest` and `config_currency_zcash_regtest` so every bitcoin-like currency resolves a config entry.

- [#22279](https://github.com/LedgerHQ/ledger-live/pull/22279) [`62cc42f`](https://github.com/LedgerHQ/ledger-live/commit/62cc42f32d041e0e1081e7fdaca04169581429ec) Thanks [@semeano](https://github.com/semeano)! - Fix Zcash mock-bridge and serialization so shielded send still works

  Persisting a _mock_ Zcash account (under `MOCK=true`) routed `toAccountRaw` through coin-bitcoin's mock bridge, which declares no assign hooks at all and so dropped both the viewing key/`privateInfo` and the transparent `bitcoinResources` the load path had just restored. A real account was never affected: coin-bitcoin's real bridge already round-trips `privateInfo` unconditionally via its Zcash chain-adapter. Mock account ids now resolve through the standalone Zcash serialization family instead — unless the host never registered that coin module (wallet-cli registers bitcoin, evm and solana only), in which case they keep coin-bitcoin's adapter instead of failing to resolve a bridge. A real account id keeps resolving through `currency.family` as before, so it never eager-loads the standalone module merely by being deserialized.

  The mock bridge also omitted `getFullViewingKey`, `deriveShieldedAddress`, and `getShieldedAddress`, so activating the private balance under `MOCK=true` threw a TypeError. Those methods now return device-free stand-ins, including a well-formed unified address so the send flow still classifies a self-transfer as a private recipient.

  `@ledgerhq/coin-bitcoin`'s Zcash chain-adapter (`chain-adapters/zcash/serialization.ts`, the bridge a real account id always resolves to) also dropped `lastSyncError` on every round-trip: the field exists on `ZcashPrivateInfoRaw` but neither `toZcashPrivateInfoRaw` nor `fromZcashPrivateInfoRaw` mapped it, so a failed shielded sync lost its retry marker on save/load. Both directions now carry it, matching `@ledgerhq/coin-zcash`'s own serializer.

### Patch Changes

- Updated dependencies [[`2d869a5`](https://github.com/LedgerHQ/ledger-live/commit/2d869a596a4562a00003de01cc657d7277dc6b7c), [`f1d8aac`](https://github.com/LedgerHQ/ledger-live/commit/f1d8aac1c7c0bc0be9beb1508c1a9ef3cf7affae), [`381bd0b`](https://github.com/LedgerHQ/ledger-live/commit/381bd0befb6a09f20f13f65c233f0e1479e7051d), [`a025d7a`](https://github.com/LedgerHQ/ledger-live/commit/a025d7a872b7b1e4681d16b2bfb54f8949bf6626), [`a896fca`](https://github.com/LedgerHQ/ledger-live/commit/a896fca1974a46f10e915d1212e0947e2d808ad5), [`8c486aa`](https://github.com/LedgerHQ/ledger-live/commit/8c486aabe3dbd100b21e43d3f344fda5142858ed), [`88bae04`](https://github.com/LedgerHQ/ledger-live/commit/88bae04e2f7e7a3de8d55c340fe32b48e37bd78d)]:
  - @ledgerhq/types-live@6.126.0
  - @ledgerhq/ledger-wallet-framework@3.6.0
  - @ledgerhq/live-signer-zcash@0.10.0
  - @ledgerhq/wallet-btc@0.6.0

## 0.54.0-next.0

### Minor Changes

- [#22561](https://github.com/LedgerHQ/ledger-live/pull/22561) [`f1d8aac`](https://github.com/LedgerHQ/ledger-live/commit/f1d8aac1c7c0bc0be9beb1508c1a9ef3cf7affae) Thanks [@YazhuEth](https://github.com/YazhuEth)! - chore(currency): drop `CryptoCurrency#bitcoinLikeInfo`

  coin-bitcoin now reads the xpub version from its own `getNetworkParameters`, and coin-zcash from a local `ZCASH_XPUB_VERSION` constant. The unused `bitcoinLikeInfo` field (and `BitcoinLikeInfoSchema`) is removed from the currency types and registry.

- [#21953](https://github.com/LedgerHQ/ledger-live/pull/21953) [`381bd0b`](https://github.com/LedgerHQ/ledger-live/commit/381bd0befb6a09f20f13f65c233f0e1479e7051d) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Consume `@ledgerhq/live-config`, `@ledgerhq/live-env`, `@ledgerhq/live-currency-format`,
  `@ledgerhq/domain-service` and `@ledgerhq/evm-tools` from npm instead of the workspace — they
  now live in the `ts-libs` repository. No API change.

- [#22589](https://github.com/LedgerHQ/ledger-live/pull/22589) [`a896fca`](https://github.com/LedgerHQ/ledger-live/commit/a896fca1974a46f10e915d1212e0947e2d808ad5) Thanks [@qperrot](https://github.com/qperrot)! - Remove the deprecated `CryptoCurrency.explorerId` field and the `LedgerExplorerId` type.

  Bitcoin-like explorer ids now come from the coin config (`config_currency_<id>.explorerId`), as EVM already does, and fall back to the currency id. The config is passed in rather than read from a module global: `toWalletBtcCurrency`, `walletBtcCurrencyById` and coin-bitcoin's `blockchainBaseURL` take it as an argument, the sync functions take the `coinConfig` resolver given to `createBridges`, and `assignFromAccountRaw` is now built with `makeAssignFromAccountRaw(coinConfig)`.

  Adds `config_currency_bitcoin_testnet`, `config_currency_bitcoin_regtest` and `config_currency_zcash_regtest` so every bitcoin-like currency resolves a config entry.

- [#22279](https://github.com/LedgerHQ/ledger-live/pull/22279) [`62cc42f`](https://github.com/LedgerHQ/ledger-live/commit/62cc42f32d041e0e1081e7fdaca04169581429ec) Thanks [@semeano](https://github.com/semeano)! - Fix Zcash mock-bridge and serialization so shielded send still works

  Persisting a _mock_ Zcash account (under `MOCK=true`) routed `toAccountRaw` through coin-bitcoin's mock bridge, which declares no assign hooks at all and so dropped both the viewing key/`privateInfo` and the transparent `bitcoinResources` the load path had just restored. A real account was never affected: coin-bitcoin's real bridge already round-trips `privateInfo` unconditionally via its Zcash chain-adapter. Mock account ids now resolve through the standalone Zcash serialization family instead — unless the host never registered that coin module (wallet-cli registers bitcoin, evm and solana only), in which case they keep coin-bitcoin's adapter instead of failing to resolve a bridge. A real account id keeps resolving through `currency.family` as before, so it never eager-loads the standalone module merely by being deserialized.

  The mock bridge also omitted `getFullViewingKey`, `deriveShieldedAddress`, and `getShieldedAddress`, so activating the private balance under `MOCK=true` threw a TypeError. Those methods now return device-free stand-ins, including a well-formed unified address so the send flow still classifies a self-transfer as a private recipient.

  `@ledgerhq/coin-bitcoin`'s Zcash chain-adapter (`chain-adapters/zcash/serialization.ts`, the bridge a real account id always resolves to) also dropped `lastSyncError` on every round-trip: the field exists on `ZcashPrivateInfoRaw` but neither `toZcashPrivateInfoRaw` nor `fromZcashPrivateInfoRaw` mapped it, so a failed shielded sync lost its retry marker on save/load. Both directions now carry it, matching `@ledgerhq/coin-zcash`'s own serializer.

### Patch Changes

- Updated dependencies [[`2d869a5`](https://github.com/LedgerHQ/ledger-live/commit/2d869a596a4562a00003de01cc657d7277dc6b7c), [`f1d8aac`](https://github.com/LedgerHQ/ledger-live/commit/f1d8aac1c7c0bc0be9beb1508c1a9ef3cf7affae), [`381bd0b`](https://github.com/LedgerHQ/ledger-live/commit/381bd0befb6a09f20f13f65c233f0e1479e7051d), [`a025d7a`](https://github.com/LedgerHQ/ledger-live/commit/a025d7a872b7b1e4681d16b2bfb54f8949bf6626), [`a896fca`](https://github.com/LedgerHQ/ledger-live/commit/a896fca1974a46f10e915d1212e0947e2d808ad5), [`8c486aa`](https://github.com/LedgerHQ/ledger-live/commit/8c486aabe3dbd100b21e43d3f344fda5142858ed), [`88bae04`](https://github.com/LedgerHQ/ledger-live/commit/88bae04e2f7e7a3de8d55c340fe32b48e37bd78d)]:
  - @ledgerhq/types-live@6.126.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.6.0-next.0
  - @ledgerhq/live-signer-zcash@0.10.0
  - @ledgerhq/wallet-btc@0.6.0

## 0.53.0

### Minor Changes

- [#22343](https://github.com/LedgerHQ/ledger-live/pull/22343) [`387619d`](https://github.com/LedgerHQ/ledger-live/commit/387619d7be17b3d7cd86031430769c6bb6638a68) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Drop the `documentation` doc-gen CLI: remove the `doc` script and `documentation` devDependency, and the related `micromark` patch in `.pnpmfile.cjs`

### Patch Changes

- Updated dependencies [[`387619d`](https://github.com/LedgerHQ/ledger-live/commit/387619d7be17b3d7cd86031430769c6bb6638a68), [`a62ad28`](https://github.com/LedgerHQ/ledger-live/commit/a62ad28e4900a887567fb61fb8f197af4fa5a23b), [`5d2f40f`](https://github.com/LedgerHQ/ledger-live/commit/5d2f40f470f859960e43a2a08755a962796f6beb), [`29ce771`](https://github.com/LedgerHQ/ledger-live/commit/29ce7712ce93cd27afa97eda2d14a0ff066551fb), [`d59d123`](https://github.com/LedgerHQ/ledger-live/commit/d59d123a2ba037b44507b1f5424e31f05309ec26), [`40251b4`](https://github.com/LedgerHQ/ledger-live/commit/40251b41a62b2381c5c79410073a5f0b3c1fe629), [`e2134f5`](https://github.com/LedgerHQ/ledger-live/commit/e2134f5cffe4669ff5896e2b52904fe22218461b)]:
  - @ledgerhq/ledger-wallet-framework@3.5.0
  - @ledgerhq/types-live@6.125.0
  - @ledgerhq/live-env@4.1.0
  - @ledgerhq/wallet-btc@0.6.0
  - @ledgerhq/live-signer-zcash@0.10.0

## 0.53.0-next.0

### Minor Changes

- [#22343](https://github.com/LedgerHQ/ledger-live/pull/22343) [`387619d`](https://github.com/LedgerHQ/ledger-live/commit/387619d7be17b3d7cd86031430769c6bb6638a68) Thanks [@gre-ledger](https://github.com/gre-ledger)! - Drop the `documentation` doc-gen CLI: remove the `doc` script and `documentation` devDependency, and the related `micromark` patch in `.pnpmfile.cjs`

### Patch Changes

- Updated dependencies [[`387619d`](https://github.com/LedgerHQ/ledger-live/commit/387619d7be17b3d7cd86031430769c6bb6638a68), [`a62ad28`](https://github.com/LedgerHQ/ledger-live/commit/a62ad28e4900a887567fb61fb8f197af4fa5a23b), [`5d2f40f`](https://github.com/LedgerHQ/ledger-live/commit/5d2f40f470f859960e43a2a08755a962796f6beb), [`29ce771`](https://github.com/LedgerHQ/ledger-live/commit/29ce7712ce93cd27afa97eda2d14a0ff066551fb), [`d59d123`](https://github.com/LedgerHQ/ledger-live/commit/d59d123a2ba037b44507b1f5424e31f05309ec26), [`40251b4`](https://github.com/LedgerHQ/ledger-live/commit/40251b41a62b2381c5c79410073a5f0b3c1fe629), [`e2134f5`](https://github.com/LedgerHQ/ledger-live/commit/e2134f5cffe4669ff5896e2b52904fe22218461b)]:
  - @ledgerhq/ledger-wallet-framework@3.5.0-next.0
  - @ledgerhq/types-live@6.125.0-next.0
  - @ledgerhq/live-env@4.1.0-next.0
  - @ledgerhq/wallet-btc@0.6.0-next.0
  - @ledgerhq/live-signer-zcash@0.10.0

## 0.52.1

### Patch Changes

- Updated dependencies [[`85e01c4`](https://github.com/LedgerHQ/ledger-live/commit/85e01c449dab75d75851631a56d292f2cb0c5b36), [`dc204a7`](https://github.com/LedgerHQ/ledger-live/commit/dc204a7633e6f7c9acb66fbb18a6aeaa2e75c4bb), [`30828c2`](https://github.com/LedgerHQ/ledger-live/commit/30828c22cc44c9929d7eda782e9d559a9e0145c3), [`5ddb9ab`](https://github.com/LedgerHQ/ledger-live/commit/5ddb9ab2874a6715d706042701e8b2242b1c14b9)]:
  - @ledgerhq/types-live@6.124.0
  - @ledgerhq/wallet-btc@0.5.0
  - @ledgerhq/ledger-wallet-framework@3.4.0
  - @ledgerhq/live-signer-zcash@0.10.0

## 0.52.1-next.0

### Patch Changes

- Updated dependencies [[`85e01c4`](https://github.com/LedgerHQ/ledger-live/commit/85e01c449dab75d75851631a56d292f2cb0c5b36), [`dc204a7`](https://github.com/LedgerHQ/ledger-live/commit/dc204a7633e6f7c9acb66fbb18a6aeaa2e75c4bb), [`30828c2`](https://github.com/LedgerHQ/ledger-live/commit/30828c22cc44c9929d7eda782e9d559a9e0145c3), [`5ddb9ab`](https://github.com/LedgerHQ/ledger-live/commit/5ddb9ab2874a6715d706042701e8b2242b1c14b9)]:
  - @ledgerhq/types-live@6.124.0-next.0
  - @ledgerhq/wallet-btc@0.5.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.4.0-next.0
  - @ledgerhq/live-signer-zcash@0.10.0

## 0.52.0

### Minor Changes

- [#21420](https://github.com/LedgerHQ/ledger-live/pull/21420) [`0152cad`](https://github.com/LedgerHQ/ledger-live/commit/0152cade87e061bb2b56fd71f8a404c3dfed21e0) Thanks [@francois-guerin-ledger](https://github.com/francois-guerin-ledger)! - Fix an undecodable/corrupted xpub crashing the whole Bitcoin address-scan block. `getPubkeyAt` now throws a typed `InvalidXpub` error; `checkAddressesBlock` uses `Promise.allSettled` so a bad xpub no longer aborts the block scan.

### Patch Changes

- Updated dependencies [[`52f573c`](https://github.com/LedgerHQ/ledger-live/commit/52f573c045c52805d250079dd300870c4468493d), [`2d42e64`](https://github.com/LedgerHQ/ledger-live/commit/2d42e647d55f79cf2eb821ec30a232cc07891219), [`b7d0367`](https://github.com/LedgerHQ/ledger-live/commit/b7d03671db1aa022d3ff375465c7d8470bf2b215), [`5b7d11d`](https://github.com/LedgerHQ/ledger-live/commit/5b7d11dd9a988f0034b4b5b6168f02429ba5a406), [`5e971b5`](https://github.com/LedgerHQ/ledger-live/commit/5e971b55429cdcab0f69825ce2056fef24d30215), [`b7a8906`](https://github.com/LedgerHQ/ledger-live/commit/b7a89064587bbcd1f758f7b6205a616225ac2317), [`b9e15ac`](https://github.com/LedgerHQ/ledger-live/commit/b9e15ac78e2b89919c605511f333282610e57225), [`0152cad`](https://github.com/LedgerHQ/ledger-live/commit/0152cade87e061bb2b56fd71f8a404c3dfed21e0), [`9fb98ab`](https://github.com/LedgerHQ/ledger-live/commit/9fb98ab74e3ca680e686a302b9beaa460a087783), [`6656f90`](https://github.com/LedgerHQ/ledger-live/commit/6656f90769c3419e1f121c0c2368eab4566e48ba)]:
  - @ledgerhq/types-live@6.123.0
  - @ledgerhq/ledger-wallet-framework@3.3.0
  - @ledgerhq/live-env@4.0.0
  - @ledgerhq/wallet-btc@0.4.0
  - @ledgerhq/live-signer-zcash@0.10.0

## 0.52.0-next.0

### Minor Changes

- [#21420](https://github.com/LedgerHQ/ledger-live/pull/21420) [`0152cad`](https://github.com/LedgerHQ/ledger-live/commit/0152cade87e061bb2b56fd71f8a404c3dfed21e0) Thanks [@francois-guerin-ledger](https://github.com/francois-guerin-ledger)! - Fix an undecodable/corrupted xpub crashing the whole Bitcoin address-scan block. `getPubkeyAt` now throws a typed `InvalidXpub` error; `checkAddressesBlock` uses `Promise.allSettled` so a bad xpub no longer aborts the block scan.

### Patch Changes

- Updated dependencies [[`52f573c`](https://github.com/LedgerHQ/ledger-live/commit/52f573c045c52805d250079dd300870c4468493d), [`2d42e64`](https://github.com/LedgerHQ/ledger-live/commit/2d42e647d55f79cf2eb821ec30a232cc07891219), [`b7d0367`](https://github.com/LedgerHQ/ledger-live/commit/b7d03671db1aa022d3ff375465c7d8470bf2b215), [`5b7d11d`](https://github.com/LedgerHQ/ledger-live/commit/5b7d11dd9a988f0034b4b5b6168f02429ba5a406), [`5e971b5`](https://github.com/LedgerHQ/ledger-live/commit/5e971b55429cdcab0f69825ce2056fef24d30215), [`b7a8906`](https://github.com/LedgerHQ/ledger-live/commit/b7a89064587bbcd1f758f7b6205a616225ac2317), [`b9e15ac`](https://github.com/LedgerHQ/ledger-live/commit/b9e15ac78e2b89919c605511f333282610e57225), [`0152cad`](https://github.com/LedgerHQ/ledger-live/commit/0152cade87e061bb2b56fd71f8a404c3dfed21e0), [`9fb98ab`](https://github.com/LedgerHQ/ledger-live/commit/9fb98ab74e3ca680e686a302b9beaa460a087783), [`6656f90`](https://github.com/LedgerHQ/ledger-live/commit/6656f90769c3419e1f121c0c2368eab4566e48ba)]:
  - @ledgerhq/types-live@6.123.0-next.0
  - @ledgerhq/ledger-wallet-framework@3.3.0-next.0
  - @ledgerhq/live-env@4.0.0-next.0
  - @ledgerhq/wallet-btc@0.4.0-next.0
  - @ledgerhq/live-signer-zcash@0.10.0

## 0.51.3

### Patch Changes

- Updated dependencies [[`27388a8`](https://github.com/LedgerHQ/ledger-live/commit/27388a894eaac67b8e162a60f6d3368aad0a8682), [`e21305a`](https://github.com/LedgerHQ/ledger-live/commit/e21305abce18f0a9408bf6c0e2bb47d5c992e06a)]:
  - @ledgerhq/types-live@6.122.0
  - @ledgerhq/ledger-wallet-framework@3.2.0
  - @ledgerhq/live-env@3.2.0
  - @ledgerhq/wallet-btc@0.3.0
  - @ledgerhq/live-signer-zcash@0.10.0

<!-- changelog-pruned: older entries were removed to keep this file small. Full history is in `git log -p CHANGELOG.md` and in the GitHub release for each version. -->
