import { type CallOptions, type ChannelCredentials, Client, type ClientDuplexStream, type ClientOptions, type ClientReadableStream, type ClientUnaryCall, type handleBidiStreamingCall, type handleServerStreamingCall, type handleUnaryCall, type Metadata, type ServiceError, type UntypedServiceImplementation } from "@grpc/grpc-js";
import { FrameDefinitions, Frames } from "./frame_params";
import { Empty } from "./google/protobuf/empty";
import { AddAllConnectedCanChannelsRequest, AddAllConnectedLinChannelsRequest, AddOrUpdateDataProcessorRequest, AddOrUpdateSourceRequest, AddOrUpdateTargetRequest, ClearLinMessageRequest, ConnectNodesRequest, DisconnectNodesRequest, GetAvailableFramePropertyNamesResponse, GetChannelsFromLogFileRequest, GetChannelsFromLogFileResponse, GetDataFramesBeforeTimestampRequest, GetDataFramesBetweenTimestampsRequest, GetDataProcessorResponse, GetFrameEnvelopesRequest, GetFrameEnvelopesResponse, GetLogFileFormatsRequest, GetLogFileFormatsResponse, GetProtocolsInDatabaseFilesRequest, GetProtocolsInDatabaseFilesResponse, GetQueuedTransmissionsResponse, GetScheduleTablesFromDatabaseFilesRequest, GetScheduleTablesFromDatabaseFilesResponse, GetSignalDataFromMessageDataRequest, GetSignalDataFromMessageDataResponse, GetSourceResponse, GetTargetResponse, IdentifierRequest, MeasurementEventArgs, OnlineStatus, QueueMessagesRequest, QueueMessagesResponse, RequestLinMessageRequest, RunExtensionCommandRequest, RunExtensionCommandResponse, SendLinWakeupFrameRequest, SendMessageRequest, SendMessagesRequest, SetMeasurementSetupRequest, SetSignalDataToMessageDataRequest, SetSignalDataToMessageDataResponse, StartPeriodicTransmissionRequest, StartPeriodicTransmissionResponse, SubscribeForDataRequest, UpdateLinMessageRequest, UpdatePeriodicTransmissionRequest } from "./measurement_params";
import { MeasurementSetup } from "./measurement_settings";
import { NodeStatuses } from "./status_params";
/** The measurement service. This service is responsible for the measurement setup. */
export type MeasurementServiceService = typeof MeasurementServiceService;
export declare const MeasurementServiceService: {
    /**
     * Starts a subscription for measurement events.
     * @returns A stream of MeasurementEventArgs messages.
     */
    readonly subscribeForEvents: {
        readonly path: "/measurementservice.MeasurementService/SubscribeForEvents";
        readonly requestStream: false;
        readonly responseStream: true;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: MeasurementEventArgs) => Buffer;
        readonly responseDeserialize: (value: Buffer) => MeasurementEventArgs;
    };
    /**
     * Stops the subscription for measurement events.
     * @returns An empty response message.
     */
    readonly unsubscribeFromEvents: {
        readonly path: "/measurementservice.MeasurementService/UnsubscribeFromEvents";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Starts a subscription for measurement data.
     * @param request A request message with API preferences.
     * @returns A stream of Frames messages.
     */
    readonly subscribeForData: {
        readonly path: "/measurementservice.MeasurementService/SubscribeForData";
        readonly requestStream: true;
        readonly responseStream: true;
        readonly requestSerialize: (value: SubscribeForDataRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => SubscribeForDataRequest;
        readonly responseSerialize: (value: Frames) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Frames;
    };
    /**
     * Stops the subscription for measurement data.
     * @returns An empty response message.
     */
    readonly unsubscribeFromData: {
        readonly path: "/measurementservice.MeasurementService/UnsubscribeFromData";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Starts a subscription for measurement status.
     * @returns A stream of NodeStatuses messages.
     */
    readonly subscribeForStatus: {
        readonly path: "/measurementservice.MeasurementService/SubscribeForStatus";
        readonly requestStream: false;
        readonly responseStream: true;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: NodeStatuses) => Buffer;
        readonly responseDeserialize: (value: Buffer) => NodeStatuses;
    };
    /**
     * Stops the subscription for measurement status.
     * @returns An empty response message.
     */
    readonly unsubscribeFromStatus: {
        readonly path: "/measurementservice.MeasurementService/UnsubscribeFromStatus";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to clear status for the specified node.
     * @param request A request message with a node identifier.
     * @returns An empty response message.
     */
    readonly clearStatus: {
        readonly path: "/measurementservice.MeasurementService/ClearStatus";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Gets the current measurement setup.
     * @returns A response message with the current setup.
     */
    readonly getSetup: {
        readonly path: "/measurementservice.MeasurementService/GetSetup";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: MeasurementSetup) => Buffer;
        readonly responseDeserialize: (value: Buffer) => MeasurementSetup;
    };
    /**
     * Sets a new measurement setup.
     * @param request A request message with the new setup.
     * @returns An empty response message.
     */
    readonly setSetup: {
        readonly path: "/measurementservice.MeasurementService/SetSetup";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: SetMeasurementSetupRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => SetMeasurementSetupRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Gets the current online status.
     * @returns A response message with the current online status.
     */
    readonly getOnlineStatus: {
        readonly path: "/measurementservice.MeasurementService/GetOnlineStatus";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: OnlineStatus) => Buffer;
        readonly responseDeserialize: (value: Buffer) => OnlineStatus;
    };
    /**
     * Asks the service to add all connected CAN channels with the specified settings.
     * @param request A request message with CAN channel settings.
     * @returns An empty response message.
     */
    readonly addAllConnectedCanChannels: {
        readonly path: "/measurementservice.MeasurementService/AddAllConnectedCanChannels";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: AddAllConnectedCanChannelsRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => AddAllConnectedCanChannelsRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to add all connected LIN channels with the specified settings.
     * @param request A request message with LIN channel settings.
     * @returns An empty response message.
     */
    readonly addAllConnectedLinChannels: {
        readonly path: "/measurementservice.MeasurementService/AddAllConnectedLinChannels";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: AddAllConnectedLinChannelsRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => AddAllConnectedLinChannelsRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to add a new source node with the specified settings.
     * @param request A request message with source node settings.
     * @returns An empty response message.
     */
    readonly addSource: {
        readonly path: "/measurementservice.MeasurementService/AddSource";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: AddOrUpdateSourceRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => AddOrUpdateSourceRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Gets the source node with the specified identifier.
     * @param request A request message with source node identifier.
     * @returns A response message with the source node settings.
     */
    readonly getSource: {
        readonly path: "/measurementservice.MeasurementService/GetSource";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: GetSourceResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetSourceResponse;
    };
    /**
     * Asks the service to update a source node with the specified settings.
     * @param request A request message with source node settings.
     * @returns An empty response message.
     */
    readonly updateSource: {
        readonly path: "/measurementservice.MeasurementService/UpdateSource";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: AddOrUpdateSourceRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => AddOrUpdateSourceRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to delete a source node with the specified identifier.
     * @param request A request message with source node identifier.
     * @returns An empty response message.
     */
    readonly deleteSource: {
        readonly path: "/measurementservice.MeasurementService/DeleteSource";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to add a new data processor node with the specified settings.
     * @param request A request message with data processor node settings.
     * @returns An empty response message.
     */
    readonly addDataProcessor: {
        readonly path: "/measurementservice.MeasurementService/AddDataProcessor";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: AddOrUpdateDataProcessorRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => AddOrUpdateDataProcessorRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Gets the data processor node with the specified identifier.
     * @param request A request message with data processor node identifier.
     * @returns A response message with the data processor node settings.
     */
    readonly getDataProcessor: {
        readonly path: "/measurementservice.MeasurementService/GetDataProcessor";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: GetDataProcessorResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetDataProcessorResponse;
    };
    /**
     * Asks the service to update a data processor node with the specified settings.
     * @param request A request message with data processor node settings.
     * @returns An empty response message.
     */
    readonly updateDataProcessor: {
        readonly path: "/measurementservice.MeasurementService/UpdateDataProcessor";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: AddOrUpdateDataProcessorRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => AddOrUpdateDataProcessorRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to delete a data processor node with the specified identifier.
     * @param request A request message with data processor node identifier.
     * @returns An empty response message.
     */
    readonly deleteDataProcessor: {
        readonly path: "/measurementservice.MeasurementService/DeleteDataProcessor";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to add a new target node with the specified settings.
     * @param request A request message with target node settings.
     * @returns An empty response message.
     */
    readonly addTarget: {
        readonly path: "/measurementservice.MeasurementService/AddTarget";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: AddOrUpdateTargetRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => AddOrUpdateTargetRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Gets the target node with the specified identifier.
     * @param request A request message with target node identifier.
     * @returns A response message with the target node settings.
     */
    readonly getTarget: {
        readonly path: "/measurementservice.MeasurementService/GetTarget";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: GetTargetResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetTargetResponse;
    };
    /**
     * Asks the service to update a target node with the specified settings.
     * @param request A request message with target node settings.
     * @returns An empty response message.
     */
    readonly updateTarget: {
        readonly path: "/measurementservice.MeasurementService/UpdateTarget";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: AddOrUpdateTargetRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => AddOrUpdateTargetRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to delete a target node with the specified identifier.
     * @param request A request message with target node identifier.
     * @returns An empty response message.
     */
    readonly deleteTarget: {
        readonly path: "/measurementservice.MeasurementService/DeleteTarget";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to connect two nodes.
     * @param request A request message with node identifiers.
     * @returns An empty response message.
     */
    readonly connectNodes: {
        readonly path: "/measurementservice.MeasurementService/ConnectNodes";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: ConnectNodesRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => ConnectNodesRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to disconnect two nodes.
     * @param request A request message with node identifiers.
     * @returns An empty response message.
     */
    readonly disconnectNodes: {
        readonly path: "/measurementservice.MeasurementService/DisconnectNodes";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: DisconnectNodesRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => DisconnectNodesRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to enable a node.
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    readonly enableNode: {
        readonly path: "/measurementservice.MeasurementService/EnableNode";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to disable a node.
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    readonly disableNode: {
        readonly path: "/measurementservice.MeasurementService/DisableNode";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to start a channel node (go bus on).
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    readonly startChannel: {
        readonly path: "/measurementservice.MeasurementService/StartChannel";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to stop a channel node (go bus off).
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    readonly stopChannel: {
        readonly path: "/measurementservice.MeasurementService/StopChannel";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to start a measurement (go online).
     * @returns An empty response message.
     */
    readonly startMeasurement: {
        readonly path: "/measurementservice.MeasurementService/StartMeasurement";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to stop a measurement (go offline).
     * @returns An empty response message.
     */
    readonly stopMeasurement: {
        readonly path: "/measurementservice.MeasurementService/StopMeasurement";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to send a message.
     * @param request A request message with information about the message to be sent out.
     * @returns An empty response message.
     */
    readonly sendMessage: {
        readonly path: "/measurementservice.MeasurementService/SendMessage";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: SendMessageRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => SendMessageRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to send a message.
     * @param request A request message with information about the message to be sent out.
     * @returns An empty response message.
     */
    readonly sendMessages: {
        readonly path: "/measurementservice.MeasurementService/SendMessages";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: SendMessagesRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => SendMessagesRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to send a LIN wakeup frame.
     * @param request A request message with information about the frame to be sent out.
     * @returns An empty response message.
     */
    readonly sendLinWakeupFrame: {
        readonly path: "/measurementservice.MeasurementService/SendLinWakeupFrame";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: SendLinWakeupFrameRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => SendLinWakeupFrameRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to write a LIN message header to the LIN bus.
     * @param request A request message with information about the frame to be updated.
     * @returns An empty response message.
     */
    readonly requestLinMessage: {
        readonly path: "/measurementservice.MeasurementService/RequestLinMessage";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: RequestLinMessageRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => RequestLinMessageRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to update a LIN slave's message buffer.
     * @param request A request message with information about the frame to be updated.
     * @returns An empty response message.
     */
    readonly updateLinMessage: {
        readonly path: "/measurementservice.MeasurementService/UpdateLinMessage";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: UpdateLinMessageRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => UpdateLinMessageRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to clear a LIN slave's message buffer.
     * @param request A request message with information about the frame to be cleared.
     * @returns An empty response message.
     */
    readonly clearLinMessage: {
        readonly path: "/measurementservice.MeasurementService/ClearLinMessage";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: ClearLinMessageRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => ClearLinMessageRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to start a periodic transmission.
     * @param request A request message with information about the periodic transmission.
     * @returns A response message with an identifier connected to the started periodic transmission.
     */
    readonly startPeriodicTransmission: {
        readonly path: "/measurementservice.MeasurementService/StartPeriodicTransmission";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: StartPeriodicTransmissionRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => StartPeriodicTransmissionRequest;
        readonly responseSerialize: (value: StartPeriodicTransmissionResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => StartPeriodicTransmissionResponse;
    };
    /**
     * Asks the service to update a periodic transmission with new settings.
     * @param request A request message with the newsettings and the identifier of the periodic transmission.
     * @returns An empty response message.
     */
    readonly updatePeriodicTransmission: {
        readonly path: "/measurementservice.MeasurementService/UpdatePeriodicTransmission";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: UpdatePeriodicTransmissionRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => UpdatePeriodicTransmissionRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to stop a periodic transmission.
     * @param request A request message with identifier of the periodic transmission to be stopped.
     * @returns An empty response message.
     */
    readonly stopPeriodicTransmission: {
        readonly path: "/measurementservice.MeasurementService/StopPeriodicTransmission";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to send out several message frames, spaced apart in time.
     * @param request A request message with the frames to be sent out and their timing.
     * @returns A response message with an identifier connected to the queued transmission.
     */
    readonly queueMessages: {
        readonly path: "/measurementservice.MeasurementService/QueueMessages";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: QueueMessagesRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => QueueMessagesRequest;
        readonly responseSerialize: (value: QueueMessagesResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => QueueMessagesResponse;
    };
    /**
     * Asks the service to stop a queued transmission.
     * @param request A request message with identifier of the queued transmission to be stopped.
     * @returns An empty response message.
     */
    readonly stopQueuedTransmission: {
        readonly path: "/measurementservice.MeasurementService/StopQueuedTransmission";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service for the currently known queued transmissions.
     * @returns A response message with the queued transmissions.
     */
    readonly getQueuedTransmissions: {
        readonly path: "/measurementservice.MeasurementService/GetQueuedTransmissions";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: GetQueuedTransmissionsResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetQueuedTransmissionsResponse;
    };
    /**
     * Asks the service to start a log replay.
     * @param request A request message with identifier of the log replay to be started.
     * @returns An empty response message.
     */
    readonly startLogReplay: {
        readonly path: "/measurementservice.MeasurementService/StartLogReplay";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to stop a log replay.
     * @param request A request message with identifier of the log replay to be stopped.
     * @returns An empty response message.
     */
    readonly stopLogReplay: {
        readonly path: "/measurementservice.MeasurementService/StopLogReplay";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to start a traffic generator.
     * @param request A request message with identifier of the traffic generator to be started.
     * @returns An empty response message.
     */
    readonly startTrafficGenerator: {
        readonly path: "/measurementservice.MeasurementService/StartTrafficGenerator";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Asks the service to stop a traffic generator.
     * @param request A request message with identifier of the traffic generator to be stopped.
     * @returns An empty response message.
     */
    readonly stopTrafficGenerator: {
        readonly path: "/measurementservice.MeasurementService/StopTrafficGenerator";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: Empty) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Empty;
    };
    /**
     * Gets all supported log file formats.
     * @param request A request message with filter information.
     * @returns A response message with the supported log file formats.
     */
    readonly getLogFileFormats: {
        readonly path: "/measurementservice.MeasurementService/GetLogFileFormats";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: GetLogFileFormatsRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => GetLogFileFormatsRequest;
        readonly responseSerialize: (value: GetLogFileFormatsResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetLogFileFormatsResponse;
    };
    /**
     * Gets all available frame definitions in the current measurement setup.
     * @param request A request message with an optional node identifier.
     * @returns A response message with the available frame definitions.
     */
    readonly getFrameDefinitions: {
        readonly path: "/measurementservice.MeasurementService/GetFrameDefinitions";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: IdentifierRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => IdentifierRequest;
        readonly responseSerialize: (value: FrameDefinitions) => Buffer;
        readonly responseDeserialize: (value: Buffer) => FrameDefinitions;
    };
    /**
     * Gets all schedule tables in the provided database files.
     * @param request A request message with the database files to be parsed.
     * @returns A response message with the schedule tables parsed from the database files.
     */
    readonly getScheduleTablesFromDatabaseFiles: {
        readonly path: "/measurementservice.MeasurementService/GetScheduleTablesFromDatabaseFiles";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: GetScheduleTablesFromDatabaseFilesRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => GetScheduleTablesFromDatabaseFilesRequest;
        readonly responseSerialize: (value: GetScheduleTablesFromDatabaseFilesResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetScheduleTablesFromDatabaseFilesResponse;
    };
    /**
     * Gets all channels in the provided log file.
     * @param request A request message with the log file to be parsed and a flag saying that if needed for converting (and thereby parsing), any KME50 file at the same path with the same name as the log file may be overwritten or not.
     * @returns A response message with the channels parsed from the log file.
     */
    readonly getChannelsFromLogFile: {
        readonly path: "/measurementservice.MeasurementService/GetChannelsFromLogFile";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: GetChannelsFromLogFileRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => GetChannelsFromLogFileRequest;
        readonly responseSerialize: (value: GetChannelsFromLogFileResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetChannelsFromLogFileResponse;
    };
    /**
     * Gets all signal values for a message.
     * @param request A request message with message name and message data.
     * @returns A response message with all signal values.
     */
    readonly getSignalDataFromMessageData: {
        readonly path: "/measurementservice.MeasurementService/GetSignalDataFromMessageData";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: GetSignalDataFromMessageDataRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => GetSignalDataFromMessageDataRequest;
        readonly responseSerialize: (value: GetSignalDataFromMessageDataResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetSignalDataFromMessageDataResponse;
    };
    /**
     * Sets all signal values for a message.
     * @param request A request message with message name and signal values.
     * @returns A response message with message data and all updated signal values.
     */
    readonly setSignalDataToMessageData: {
        readonly path: "/measurementservice.MeasurementService/SetSignalDataToMessageData";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: SetSignalDataToMessageDataRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => SetSignalDataToMessageDataRequest;
        readonly responseSerialize: (value: SetSignalDataToMessageDataResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => SetSignalDataToMessageDataResponse;
    };
    /**
     * Gets data frames before a specific timestamp from the data buffer.
     * @param request A request message with the timestamp and a max count.
     * @returns A response message with data frames before the specified timestamp.
     */
    readonly getDataFramesBeforeTimestamp: {
        readonly path: "/measurementservice.MeasurementService/GetDataFramesBeforeTimestamp";
        readonly requestStream: false;
        readonly responseStream: true;
        readonly requestSerialize: (value: GetDataFramesBeforeTimestampRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => GetDataFramesBeforeTimestampRequest;
        readonly responseSerialize: (value: Frames) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Frames;
    };
    /**
     * Gets data frames between specific timestamps from the data buffer.
     * @param request A request message with the from and to timestamps.
     * @returns A response message with data frames between the specified timestamps.
     */
    readonly getDataFramesBetweenTimestamps: {
        readonly path: "/measurementservice.MeasurementService/GetDataFramesBetweenTimestamps";
        readonly requestStream: false;
        readonly responseStream: true;
        readonly requestSerialize: (value: GetDataFramesBetweenTimestampsRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => GetDataFramesBetweenTimestampsRequest;
        readonly responseSerialize: (value: Frames) => Buffer;
        readonly responseDeserialize: (value: Buffer) => Frames;
    };
    /**
     * Gets data envelopes between specific timestamps for specific frames from the data buffer.
     * @param request A request message with the from and to timestamps and the frame identifiers.
     * @returns A response message with data envelopes between the specified timestamps.
     */
    readonly getFrameEnvelopes: {
        readonly path: "/measurementservice.MeasurementService/GetFrameEnvelopes";
        readonly requestStream: false;
        readonly responseStream: true;
        readonly requestSerialize: (value: GetFrameEnvelopesRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => GetFrameEnvelopesRequest;
        readonly responseSerialize: (value: GetFrameEnvelopesResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetFrameEnvelopesResponse;
    };
    /**
     * Gets all available frame property names that can be used in filters and as metadata in the current measurement setup.
     * @returns A response message with the available frame property names.
     */
    readonly getAvailableFramePropertyNames: {
        readonly path: "/measurementservice.MeasurementService/GetAvailableFramePropertyNames";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: Empty) => Buffer;
        readonly requestDeserialize: (value: Buffer) => Empty;
        readonly responseSerialize: (value: GetAvailableFramePropertyNamesResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetAvailableFramePropertyNamesResponse;
    };
    /**
     * Gets what protocols that are present in a set of database files.
     * @param request A request message with one or more database file.
     * @returns A response with present protocols.
     */
    readonly getProtocolsInDatabaseFiles: {
        readonly path: "/measurementservice.MeasurementService/GetProtocolsInDatabaseFiles";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: GetProtocolsInDatabaseFilesRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => GetProtocolsInDatabaseFilesRequest;
        readonly responseSerialize: (value: GetProtocolsInDatabaseFilesResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => GetProtocolsInDatabaseFilesResponse;
    };
    /**
     * Triggers a command to be run on an extension node.
     * @param request A request message with the command id and arguments.
     * @returns A response message with the command result.
     */
    readonly runExtensionCommand: {
        readonly path: "/measurementservice.MeasurementService/RunExtensionCommand";
        readonly requestStream: false;
        readonly responseStream: false;
        readonly requestSerialize: (value: RunExtensionCommandRequest) => Buffer;
        readonly requestDeserialize: (value: Buffer) => RunExtensionCommandRequest;
        readonly responseSerialize: (value: RunExtensionCommandResponse) => Buffer;
        readonly responseDeserialize: (value: Buffer) => RunExtensionCommandResponse;
    };
};
export interface MeasurementServiceServer extends UntypedServiceImplementation {
    /**
     * Starts a subscription for measurement events.
     * @returns A stream of MeasurementEventArgs messages.
     */
    subscribeForEvents: handleServerStreamingCall<Empty, MeasurementEventArgs>;
    /**
     * Stops the subscription for measurement events.
     * @returns An empty response message.
     */
    unsubscribeFromEvents: handleUnaryCall<Empty, Empty>;
    /**
     * Starts a subscription for measurement data.
     * @param request A request message with API preferences.
     * @returns A stream of Frames messages.
     */
    subscribeForData: handleBidiStreamingCall<SubscribeForDataRequest, Frames>;
    /**
     * Stops the subscription for measurement data.
     * @returns An empty response message.
     */
    unsubscribeFromData: handleUnaryCall<Empty, Empty>;
    /**
     * Starts a subscription for measurement status.
     * @returns A stream of NodeStatuses messages.
     */
    subscribeForStatus: handleServerStreamingCall<Empty, NodeStatuses>;
    /**
     * Stops the subscription for measurement status.
     * @returns An empty response message.
     */
    unsubscribeFromStatus: handleUnaryCall<Empty, Empty>;
    /**
     * Asks the service to clear status for the specified node.
     * @param request A request message with a node identifier.
     * @returns An empty response message.
     */
    clearStatus: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Gets the current measurement setup.
     * @returns A response message with the current setup.
     */
    getSetup: handleUnaryCall<Empty, MeasurementSetup>;
    /**
     * Sets a new measurement setup.
     * @param request A request message with the new setup.
     * @returns An empty response message.
     */
    setSetup: handleUnaryCall<SetMeasurementSetupRequest, Empty>;
    /**
     * Gets the current online status.
     * @returns A response message with the current online status.
     */
    getOnlineStatus: handleUnaryCall<Empty, OnlineStatus>;
    /**
     * Asks the service to add all connected CAN channels with the specified settings.
     * @param request A request message with CAN channel settings.
     * @returns An empty response message.
     */
    addAllConnectedCanChannels: handleUnaryCall<AddAllConnectedCanChannelsRequest, Empty>;
    /**
     * Asks the service to add all connected LIN channels with the specified settings.
     * @param request A request message with LIN channel settings.
     * @returns An empty response message.
     */
    addAllConnectedLinChannels: handleUnaryCall<AddAllConnectedLinChannelsRequest, Empty>;
    /**
     * Asks the service to add a new source node with the specified settings.
     * @param request A request message with source node settings.
     * @returns An empty response message.
     */
    addSource: handleUnaryCall<AddOrUpdateSourceRequest, Empty>;
    /**
     * Gets the source node with the specified identifier.
     * @param request A request message with source node identifier.
     * @returns A response message with the source node settings.
     */
    getSource: handleUnaryCall<IdentifierRequest, GetSourceResponse>;
    /**
     * Asks the service to update a source node with the specified settings.
     * @param request A request message with source node settings.
     * @returns An empty response message.
     */
    updateSource: handleUnaryCall<AddOrUpdateSourceRequest, Empty>;
    /**
     * Asks the service to delete a source node with the specified identifier.
     * @param request A request message with source node identifier.
     * @returns An empty response message.
     */
    deleteSource: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to add a new data processor node with the specified settings.
     * @param request A request message with data processor node settings.
     * @returns An empty response message.
     */
    addDataProcessor: handleUnaryCall<AddOrUpdateDataProcessorRequest, Empty>;
    /**
     * Gets the data processor node with the specified identifier.
     * @param request A request message with data processor node identifier.
     * @returns A response message with the data processor node settings.
     */
    getDataProcessor: handleUnaryCall<IdentifierRequest, GetDataProcessorResponse>;
    /**
     * Asks the service to update a data processor node with the specified settings.
     * @param request A request message with data processor node settings.
     * @returns An empty response message.
     */
    updateDataProcessor: handleUnaryCall<AddOrUpdateDataProcessorRequest, Empty>;
    /**
     * Asks the service to delete a data processor node with the specified identifier.
     * @param request A request message with data processor node identifier.
     * @returns An empty response message.
     */
    deleteDataProcessor: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to add a new target node with the specified settings.
     * @param request A request message with target node settings.
     * @returns An empty response message.
     */
    addTarget: handleUnaryCall<AddOrUpdateTargetRequest, Empty>;
    /**
     * Gets the target node with the specified identifier.
     * @param request A request message with target node identifier.
     * @returns A response message with the target node settings.
     */
    getTarget: handleUnaryCall<IdentifierRequest, GetTargetResponse>;
    /**
     * Asks the service to update a target node with the specified settings.
     * @param request A request message with target node settings.
     * @returns An empty response message.
     */
    updateTarget: handleUnaryCall<AddOrUpdateTargetRequest, Empty>;
    /**
     * Asks the service to delete a target node with the specified identifier.
     * @param request A request message with target node identifier.
     * @returns An empty response message.
     */
    deleteTarget: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to connect two nodes.
     * @param request A request message with node identifiers.
     * @returns An empty response message.
     */
    connectNodes: handleUnaryCall<ConnectNodesRequest, Empty>;
    /**
     * Asks the service to disconnect two nodes.
     * @param request A request message with node identifiers.
     * @returns An empty response message.
     */
    disconnectNodes: handleUnaryCall<DisconnectNodesRequest, Empty>;
    /**
     * Asks the service to enable a node.
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    enableNode: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to disable a node.
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    disableNode: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to start a channel node (go bus on).
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    startChannel: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to stop a channel node (go bus off).
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    stopChannel: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to start a measurement (go online).
     * @returns An empty response message.
     */
    startMeasurement: handleUnaryCall<Empty, Empty>;
    /**
     * Asks the service to stop a measurement (go offline).
     * @returns An empty response message.
     */
    stopMeasurement: handleUnaryCall<Empty, Empty>;
    /**
     * Asks the service to send a message.
     * @param request A request message with information about the message to be sent out.
     * @returns An empty response message.
     */
    sendMessage: handleUnaryCall<SendMessageRequest, Empty>;
    /**
     * Asks the service to send a message.
     * @param request A request message with information about the message to be sent out.
     * @returns An empty response message.
     */
    sendMessages: handleUnaryCall<SendMessagesRequest, Empty>;
    /**
     * Asks the service to send a LIN wakeup frame.
     * @param request A request message with information about the frame to be sent out.
     * @returns An empty response message.
     */
    sendLinWakeupFrame: handleUnaryCall<SendLinWakeupFrameRequest, Empty>;
    /**
     * Asks the service to write a LIN message header to the LIN bus.
     * @param request A request message with information about the frame to be updated.
     * @returns An empty response message.
     */
    requestLinMessage: handleUnaryCall<RequestLinMessageRequest, Empty>;
    /**
     * Asks the service to update a LIN slave's message buffer.
     * @param request A request message with information about the frame to be updated.
     * @returns An empty response message.
     */
    updateLinMessage: handleUnaryCall<UpdateLinMessageRequest, Empty>;
    /**
     * Asks the service to clear a LIN slave's message buffer.
     * @param request A request message with information about the frame to be cleared.
     * @returns An empty response message.
     */
    clearLinMessage: handleUnaryCall<ClearLinMessageRequest, Empty>;
    /**
     * Asks the service to start a periodic transmission.
     * @param request A request message with information about the periodic transmission.
     * @returns A response message with an identifier connected to the started periodic transmission.
     */
    startPeriodicTransmission: handleUnaryCall<StartPeriodicTransmissionRequest, StartPeriodicTransmissionResponse>;
    /**
     * Asks the service to update a periodic transmission with new settings.
     * @param request A request message with the newsettings and the identifier of the periodic transmission.
     * @returns An empty response message.
     */
    updatePeriodicTransmission: handleUnaryCall<UpdatePeriodicTransmissionRequest, Empty>;
    /**
     * Asks the service to stop a periodic transmission.
     * @param request A request message with identifier of the periodic transmission to be stopped.
     * @returns An empty response message.
     */
    stopPeriodicTransmission: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to send out several message frames, spaced apart in time.
     * @param request A request message with the frames to be sent out and their timing.
     * @returns A response message with an identifier connected to the queued transmission.
     */
    queueMessages: handleUnaryCall<QueueMessagesRequest, QueueMessagesResponse>;
    /**
     * Asks the service to stop a queued transmission.
     * @param request A request message with identifier of the queued transmission to be stopped.
     * @returns An empty response message.
     */
    stopQueuedTransmission: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service for the currently known queued transmissions.
     * @returns A response message with the queued transmissions.
     */
    getQueuedTransmissions: handleUnaryCall<Empty, GetQueuedTransmissionsResponse>;
    /**
     * Asks the service to start a log replay.
     * @param request A request message with identifier of the log replay to be started.
     * @returns An empty response message.
     */
    startLogReplay: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to stop a log replay.
     * @param request A request message with identifier of the log replay to be stopped.
     * @returns An empty response message.
     */
    stopLogReplay: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to start a traffic generator.
     * @param request A request message with identifier of the traffic generator to be started.
     * @returns An empty response message.
     */
    startTrafficGenerator: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Asks the service to stop a traffic generator.
     * @param request A request message with identifier of the traffic generator to be stopped.
     * @returns An empty response message.
     */
    stopTrafficGenerator: handleUnaryCall<IdentifierRequest, Empty>;
    /**
     * Gets all supported log file formats.
     * @param request A request message with filter information.
     * @returns A response message with the supported log file formats.
     */
    getLogFileFormats: handleUnaryCall<GetLogFileFormatsRequest, GetLogFileFormatsResponse>;
    /**
     * Gets all available frame definitions in the current measurement setup.
     * @param request A request message with an optional node identifier.
     * @returns A response message with the available frame definitions.
     */
    getFrameDefinitions: handleUnaryCall<IdentifierRequest, FrameDefinitions>;
    /**
     * Gets all schedule tables in the provided database files.
     * @param request A request message with the database files to be parsed.
     * @returns A response message with the schedule tables parsed from the database files.
     */
    getScheduleTablesFromDatabaseFiles: handleUnaryCall<GetScheduleTablesFromDatabaseFilesRequest, GetScheduleTablesFromDatabaseFilesResponse>;
    /**
     * Gets all channels in the provided log file.
     * @param request A request message with the log file to be parsed and a flag saying that if needed for converting (and thereby parsing), any KME50 file at the same path with the same name as the log file may be overwritten or not.
     * @returns A response message with the channels parsed from the log file.
     */
    getChannelsFromLogFile: handleUnaryCall<GetChannelsFromLogFileRequest, GetChannelsFromLogFileResponse>;
    /**
     * Gets all signal values for a message.
     * @param request A request message with message name and message data.
     * @returns A response message with all signal values.
     */
    getSignalDataFromMessageData: handleUnaryCall<GetSignalDataFromMessageDataRequest, GetSignalDataFromMessageDataResponse>;
    /**
     * Sets all signal values for a message.
     * @param request A request message with message name and signal values.
     * @returns A response message with message data and all updated signal values.
     */
    setSignalDataToMessageData: handleUnaryCall<SetSignalDataToMessageDataRequest, SetSignalDataToMessageDataResponse>;
    /**
     * Gets data frames before a specific timestamp from the data buffer.
     * @param request A request message with the timestamp and a max count.
     * @returns A response message with data frames before the specified timestamp.
     */
    getDataFramesBeforeTimestamp: handleServerStreamingCall<GetDataFramesBeforeTimestampRequest, Frames>;
    /**
     * Gets data frames between specific timestamps from the data buffer.
     * @param request A request message with the from and to timestamps.
     * @returns A response message with data frames between the specified timestamps.
     */
    getDataFramesBetweenTimestamps: handleServerStreamingCall<GetDataFramesBetweenTimestampsRequest, Frames>;
    /**
     * Gets data envelopes between specific timestamps for specific frames from the data buffer.
     * @param request A request message with the from and to timestamps and the frame identifiers.
     * @returns A response message with data envelopes between the specified timestamps.
     */
    getFrameEnvelopes: handleServerStreamingCall<GetFrameEnvelopesRequest, GetFrameEnvelopesResponse>;
    /**
     * Gets all available frame property names that can be used in filters and as metadata in the current measurement setup.
     * @returns A response message with the available frame property names.
     */
    getAvailableFramePropertyNames: handleUnaryCall<Empty, GetAvailableFramePropertyNamesResponse>;
    /**
     * Gets what protocols that are present in a set of database files.
     * @param request A request message with one or more database file.
     * @returns A response with present protocols.
     */
    getProtocolsInDatabaseFiles: handleUnaryCall<GetProtocolsInDatabaseFilesRequest, GetProtocolsInDatabaseFilesResponse>;
    /**
     * Triggers a command to be run on an extension node.
     * @param request A request message with the command id and arguments.
     * @returns A response message with the command result.
     */
    runExtensionCommand: handleUnaryCall<RunExtensionCommandRequest, RunExtensionCommandResponse>;
}
export interface MeasurementServiceClient extends Client {
    /**
     * Starts a subscription for measurement events.
     * @returns A stream of MeasurementEventArgs messages.
     */
    subscribeForEvents(request: Empty, options?: Partial<CallOptions>): ClientReadableStream<MeasurementEventArgs>;
    subscribeForEvents(request: Empty, metadata?: Metadata, options?: Partial<CallOptions>): ClientReadableStream<MeasurementEventArgs>;
    /**
     * Stops the subscription for measurement events.
     * @returns An empty response message.
     */
    unsubscribeFromEvents(request: Empty, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    unsubscribeFromEvents(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    unsubscribeFromEvents(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Starts a subscription for measurement data.
     * @param request A request message with API preferences.
     * @returns A stream of Frames messages.
     */
    subscribeForData(): ClientDuplexStream<SubscribeForDataRequest, Frames>;
    subscribeForData(options: Partial<CallOptions>): ClientDuplexStream<SubscribeForDataRequest, Frames>;
    subscribeForData(metadata: Metadata, options?: Partial<CallOptions>): ClientDuplexStream<SubscribeForDataRequest, Frames>;
    /**
     * Stops the subscription for measurement data.
     * @returns An empty response message.
     */
    unsubscribeFromData(request: Empty, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    unsubscribeFromData(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    unsubscribeFromData(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Starts a subscription for measurement status.
     * @returns A stream of NodeStatuses messages.
     */
    subscribeForStatus(request: Empty, options?: Partial<CallOptions>): ClientReadableStream<NodeStatuses>;
    subscribeForStatus(request: Empty, metadata?: Metadata, options?: Partial<CallOptions>): ClientReadableStream<NodeStatuses>;
    /**
     * Stops the subscription for measurement status.
     * @returns An empty response message.
     */
    unsubscribeFromStatus(request: Empty, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    unsubscribeFromStatus(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    unsubscribeFromStatus(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to clear status for the specified node.
     * @param request A request message with a node identifier.
     * @returns An empty response message.
     */
    clearStatus(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    clearStatus(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    clearStatus(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Gets the current measurement setup.
     * @returns A response message with the current setup.
     */
    getSetup(request: Empty, callback: (error: ServiceError | null, response: MeasurementSetup) => void): ClientUnaryCall;
    getSetup(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: MeasurementSetup) => void): ClientUnaryCall;
    getSetup(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: MeasurementSetup) => void): ClientUnaryCall;
    /**
     * Sets a new measurement setup.
     * @param request A request message with the new setup.
     * @returns An empty response message.
     */
    setSetup(request: SetMeasurementSetupRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    setSetup(request: SetMeasurementSetupRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    setSetup(request: SetMeasurementSetupRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Gets the current online status.
     * @returns A response message with the current online status.
     */
    getOnlineStatus(request: Empty, callback: (error: ServiceError | null, response: OnlineStatus) => void): ClientUnaryCall;
    getOnlineStatus(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: OnlineStatus) => void): ClientUnaryCall;
    getOnlineStatus(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: OnlineStatus) => void): ClientUnaryCall;
    /**
     * Asks the service to add all connected CAN channels with the specified settings.
     * @param request A request message with CAN channel settings.
     * @returns An empty response message.
     */
    addAllConnectedCanChannels(request: AddAllConnectedCanChannelsRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addAllConnectedCanChannels(request: AddAllConnectedCanChannelsRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addAllConnectedCanChannels(request: AddAllConnectedCanChannelsRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to add all connected LIN channels with the specified settings.
     * @param request A request message with LIN channel settings.
     * @returns An empty response message.
     */
    addAllConnectedLinChannels(request: AddAllConnectedLinChannelsRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addAllConnectedLinChannels(request: AddAllConnectedLinChannelsRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addAllConnectedLinChannels(request: AddAllConnectedLinChannelsRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to add a new source node with the specified settings.
     * @param request A request message with source node settings.
     * @returns An empty response message.
     */
    addSource(request: AddOrUpdateSourceRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addSource(request: AddOrUpdateSourceRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addSource(request: AddOrUpdateSourceRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Gets the source node with the specified identifier.
     * @param request A request message with source node identifier.
     * @returns A response message with the source node settings.
     */
    getSource(request: IdentifierRequest, callback: (error: ServiceError | null, response: GetSourceResponse) => void): ClientUnaryCall;
    getSource(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: GetSourceResponse) => void): ClientUnaryCall;
    getSource(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetSourceResponse) => void): ClientUnaryCall;
    /**
     * Asks the service to update a source node with the specified settings.
     * @param request A request message with source node settings.
     * @returns An empty response message.
     */
    updateSource(request: AddOrUpdateSourceRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updateSource(request: AddOrUpdateSourceRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updateSource(request: AddOrUpdateSourceRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to delete a source node with the specified identifier.
     * @param request A request message with source node identifier.
     * @returns An empty response message.
     */
    deleteSource(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    deleteSource(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    deleteSource(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to add a new data processor node with the specified settings.
     * @param request A request message with data processor node settings.
     * @returns An empty response message.
     */
    addDataProcessor(request: AddOrUpdateDataProcessorRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addDataProcessor(request: AddOrUpdateDataProcessorRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addDataProcessor(request: AddOrUpdateDataProcessorRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Gets the data processor node with the specified identifier.
     * @param request A request message with data processor node identifier.
     * @returns A response message with the data processor node settings.
     */
    getDataProcessor(request: IdentifierRequest, callback: (error: ServiceError | null, response: GetDataProcessorResponse) => void): ClientUnaryCall;
    getDataProcessor(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: GetDataProcessorResponse) => void): ClientUnaryCall;
    getDataProcessor(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetDataProcessorResponse) => void): ClientUnaryCall;
    /**
     * Asks the service to update a data processor node with the specified settings.
     * @param request A request message with data processor node settings.
     * @returns An empty response message.
     */
    updateDataProcessor(request: AddOrUpdateDataProcessorRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updateDataProcessor(request: AddOrUpdateDataProcessorRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updateDataProcessor(request: AddOrUpdateDataProcessorRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to delete a data processor node with the specified identifier.
     * @param request A request message with data processor node identifier.
     * @returns An empty response message.
     */
    deleteDataProcessor(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    deleteDataProcessor(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    deleteDataProcessor(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to add a new target node with the specified settings.
     * @param request A request message with target node settings.
     * @returns An empty response message.
     */
    addTarget(request: AddOrUpdateTargetRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addTarget(request: AddOrUpdateTargetRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    addTarget(request: AddOrUpdateTargetRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Gets the target node with the specified identifier.
     * @param request A request message with target node identifier.
     * @returns A response message with the target node settings.
     */
    getTarget(request: IdentifierRequest, callback: (error: ServiceError | null, response: GetTargetResponse) => void): ClientUnaryCall;
    getTarget(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: GetTargetResponse) => void): ClientUnaryCall;
    getTarget(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetTargetResponse) => void): ClientUnaryCall;
    /**
     * Asks the service to update a target node with the specified settings.
     * @param request A request message with target node settings.
     * @returns An empty response message.
     */
    updateTarget(request: AddOrUpdateTargetRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updateTarget(request: AddOrUpdateTargetRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updateTarget(request: AddOrUpdateTargetRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to delete a target node with the specified identifier.
     * @param request A request message with target node identifier.
     * @returns An empty response message.
     */
    deleteTarget(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    deleteTarget(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    deleteTarget(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to connect two nodes.
     * @param request A request message with node identifiers.
     * @returns An empty response message.
     */
    connectNodes(request: ConnectNodesRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    connectNodes(request: ConnectNodesRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    connectNodes(request: ConnectNodesRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to disconnect two nodes.
     * @param request A request message with node identifiers.
     * @returns An empty response message.
     */
    disconnectNodes(request: DisconnectNodesRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    disconnectNodes(request: DisconnectNodesRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    disconnectNodes(request: DisconnectNodesRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to enable a node.
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    enableNode(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    enableNode(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    enableNode(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to disable a node.
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    disableNode(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    disableNode(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    disableNode(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to start a channel node (go bus on).
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    startChannel(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    startChannel(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    startChannel(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to stop a channel node (go bus off).
     * @param request A request message with node identifier.
     * @returns An empty response message.
     */
    stopChannel(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopChannel(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopChannel(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to start a measurement (go online).
     * @returns An empty response message.
     */
    startMeasurement(request: Empty, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    startMeasurement(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    startMeasurement(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to stop a measurement (go offline).
     * @returns An empty response message.
     */
    stopMeasurement(request: Empty, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopMeasurement(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopMeasurement(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to send a message.
     * @param request A request message with information about the message to be sent out.
     * @returns An empty response message.
     */
    sendMessage(request: SendMessageRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    sendMessage(request: SendMessageRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    sendMessage(request: SendMessageRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to send a message.
     * @param request A request message with information about the message to be sent out.
     * @returns An empty response message.
     */
    sendMessages(request: SendMessagesRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    sendMessages(request: SendMessagesRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    sendMessages(request: SendMessagesRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to send a LIN wakeup frame.
     * @param request A request message with information about the frame to be sent out.
     * @returns An empty response message.
     */
    sendLinWakeupFrame(request: SendLinWakeupFrameRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    sendLinWakeupFrame(request: SendLinWakeupFrameRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    sendLinWakeupFrame(request: SendLinWakeupFrameRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to write a LIN message header to the LIN bus.
     * @param request A request message with information about the frame to be updated.
     * @returns An empty response message.
     */
    requestLinMessage(request: RequestLinMessageRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    requestLinMessage(request: RequestLinMessageRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    requestLinMessage(request: RequestLinMessageRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to update a LIN slave's message buffer.
     * @param request A request message with information about the frame to be updated.
     * @returns An empty response message.
     */
    updateLinMessage(request: UpdateLinMessageRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updateLinMessage(request: UpdateLinMessageRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updateLinMessage(request: UpdateLinMessageRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to clear a LIN slave's message buffer.
     * @param request A request message with information about the frame to be cleared.
     * @returns An empty response message.
     */
    clearLinMessage(request: ClearLinMessageRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    clearLinMessage(request: ClearLinMessageRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    clearLinMessage(request: ClearLinMessageRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to start a periodic transmission.
     * @param request A request message with information about the periodic transmission.
     * @returns A response message with an identifier connected to the started periodic transmission.
     */
    startPeriodicTransmission(request: StartPeriodicTransmissionRequest, callback: (error: ServiceError | null, response: StartPeriodicTransmissionResponse) => void): ClientUnaryCall;
    startPeriodicTransmission(request: StartPeriodicTransmissionRequest, metadata: Metadata, callback: (error: ServiceError | null, response: StartPeriodicTransmissionResponse) => void): ClientUnaryCall;
    startPeriodicTransmission(request: StartPeriodicTransmissionRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: StartPeriodicTransmissionResponse) => void): ClientUnaryCall;
    /**
     * Asks the service to update a periodic transmission with new settings.
     * @param request A request message with the newsettings and the identifier of the periodic transmission.
     * @returns An empty response message.
     */
    updatePeriodicTransmission(request: UpdatePeriodicTransmissionRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updatePeriodicTransmission(request: UpdatePeriodicTransmissionRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    updatePeriodicTransmission(request: UpdatePeriodicTransmissionRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to stop a periodic transmission.
     * @param request A request message with identifier of the periodic transmission to be stopped.
     * @returns An empty response message.
     */
    stopPeriodicTransmission(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopPeriodicTransmission(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopPeriodicTransmission(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to send out several message frames, spaced apart in time.
     * @param request A request message with the frames to be sent out and their timing.
     * @returns A response message with an identifier connected to the queued transmission.
     */
    queueMessages(request: QueueMessagesRequest, callback: (error: ServiceError | null, response: QueueMessagesResponse) => void): ClientUnaryCall;
    queueMessages(request: QueueMessagesRequest, metadata: Metadata, callback: (error: ServiceError | null, response: QueueMessagesResponse) => void): ClientUnaryCall;
    queueMessages(request: QueueMessagesRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: QueueMessagesResponse) => void): ClientUnaryCall;
    /**
     * Asks the service to stop a queued transmission.
     * @param request A request message with identifier of the queued transmission to be stopped.
     * @returns An empty response message.
     */
    stopQueuedTransmission(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopQueuedTransmission(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopQueuedTransmission(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service for the currently known queued transmissions.
     * @returns A response message with the queued transmissions.
     */
    getQueuedTransmissions(request: Empty, callback: (error: ServiceError | null, response: GetQueuedTransmissionsResponse) => void): ClientUnaryCall;
    getQueuedTransmissions(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: GetQueuedTransmissionsResponse) => void): ClientUnaryCall;
    getQueuedTransmissions(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetQueuedTransmissionsResponse) => void): ClientUnaryCall;
    /**
     * Asks the service to start a log replay.
     * @param request A request message with identifier of the log replay to be started.
     * @returns An empty response message.
     */
    startLogReplay(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    startLogReplay(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    startLogReplay(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to stop a log replay.
     * @param request A request message with identifier of the log replay to be stopped.
     * @returns An empty response message.
     */
    stopLogReplay(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopLogReplay(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopLogReplay(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to start a traffic generator.
     * @param request A request message with identifier of the traffic generator to be started.
     * @returns An empty response message.
     */
    startTrafficGenerator(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    startTrafficGenerator(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    startTrafficGenerator(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Asks the service to stop a traffic generator.
     * @param request A request message with identifier of the traffic generator to be stopped.
     * @returns An empty response message.
     */
    stopTrafficGenerator(request: IdentifierRequest, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopTrafficGenerator(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    stopTrafficGenerator(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: Empty) => void): ClientUnaryCall;
    /**
     * Gets all supported log file formats.
     * @param request A request message with filter information.
     * @returns A response message with the supported log file formats.
     */
    getLogFileFormats(request: GetLogFileFormatsRequest, callback: (error: ServiceError | null, response: GetLogFileFormatsResponse) => void): ClientUnaryCall;
    getLogFileFormats(request: GetLogFileFormatsRequest, metadata: Metadata, callback: (error: ServiceError | null, response: GetLogFileFormatsResponse) => void): ClientUnaryCall;
    getLogFileFormats(request: GetLogFileFormatsRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetLogFileFormatsResponse) => void): ClientUnaryCall;
    /**
     * Gets all available frame definitions in the current measurement setup.
     * @param request A request message with an optional node identifier.
     * @returns A response message with the available frame definitions.
     */
    getFrameDefinitions(request: IdentifierRequest, callback: (error: ServiceError | null, response: FrameDefinitions) => void): ClientUnaryCall;
    getFrameDefinitions(request: IdentifierRequest, metadata: Metadata, callback: (error: ServiceError | null, response: FrameDefinitions) => void): ClientUnaryCall;
    getFrameDefinitions(request: IdentifierRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: FrameDefinitions) => void): ClientUnaryCall;
    /**
     * Gets all schedule tables in the provided database files.
     * @param request A request message with the database files to be parsed.
     * @returns A response message with the schedule tables parsed from the database files.
     */
    getScheduleTablesFromDatabaseFiles(request: GetScheduleTablesFromDatabaseFilesRequest, callback: (error: ServiceError | null, response: GetScheduleTablesFromDatabaseFilesResponse) => void): ClientUnaryCall;
    getScheduleTablesFromDatabaseFiles(request: GetScheduleTablesFromDatabaseFilesRequest, metadata: Metadata, callback: (error: ServiceError | null, response: GetScheduleTablesFromDatabaseFilesResponse) => void): ClientUnaryCall;
    getScheduleTablesFromDatabaseFiles(request: GetScheduleTablesFromDatabaseFilesRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetScheduleTablesFromDatabaseFilesResponse) => void): ClientUnaryCall;
    /**
     * Gets all channels in the provided log file.
     * @param request A request message with the log file to be parsed and a flag saying that if needed for converting (and thereby parsing), any KME50 file at the same path with the same name as the log file may be overwritten or not.
     * @returns A response message with the channels parsed from the log file.
     */
    getChannelsFromLogFile(request: GetChannelsFromLogFileRequest, callback: (error: ServiceError | null, response: GetChannelsFromLogFileResponse) => void): ClientUnaryCall;
    getChannelsFromLogFile(request: GetChannelsFromLogFileRequest, metadata: Metadata, callback: (error: ServiceError | null, response: GetChannelsFromLogFileResponse) => void): ClientUnaryCall;
    getChannelsFromLogFile(request: GetChannelsFromLogFileRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetChannelsFromLogFileResponse) => void): ClientUnaryCall;
    /**
     * Gets all signal values for a message.
     * @param request A request message with message name and message data.
     * @returns A response message with all signal values.
     */
    getSignalDataFromMessageData(request: GetSignalDataFromMessageDataRequest, callback: (error: ServiceError | null, response: GetSignalDataFromMessageDataResponse) => void): ClientUnaryCall;
    getSignalDataFromMessageData(request: GetSignalDataFromMessageDataRequest, metadata: Metadata, callback: (error: ServiceError | null, response: GetSignalDataFromMessageDataResponse) => void): ClientUnaryCall;
    getSignalDataFromMessageData(request: GetSignalDataFromMessageDataRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetSignalDataFromMessageDataResponse) => void): ClientUnaryCall;
    /**
     * Sets all signal values for a message.
     * @param request A request message with message name and signal values.
     * @returns A response message with message data and all updated signal values.
     */
    setSignalDataToMessageData(request: SetSignalDataToMessageDataRequest, callback: (error: ServiceError | null, response: SetSignalDataToMessageDataResponse) => void): ClientUnaryCall;
    setSignalDataToMessageData(request: SetSignalDataToMessageDataRequest, metadata: Metadata, callback: (error: ServiceError | null, response: SetSignalDataToMessageDataResponse) => void): ClientUnaryCall;
    setSignalDataToMessageData(request: SetSignalDataToMessageDataRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: SetSignalDataToMessageDataResponse) => void): ClientUnaryCall;
    /**
     * Gets data frames before a specific timestamp from the data buffer.
     * @param request A request message with the timestamp and a max count.
     * @returns A response message with data frames before the specified timestamp.
     */
    getDataFramesBeforeTimestamp(request: GetDataFramesBeforeTimestampRequest, options?: Partial<CallOptions>): ClientReadableStream<Frames>;
    getDataFramesBeforeTimestamp(request: GetDataFramesBeforeTimestampRequest, metadata?: Metadata, options?: Partial<CallOptions>): ClientReadableStream<Frames>;
    /**
     * Gets data frames between specific timestamps from the data buffer.
     * @param request A request message with the from and to timestamps.
     * @returns A response message with data frames between the specified timestamps.
     */
    getDataFramesBetweenTimestamps(request: GetDataFramesBetweenTimestampsRequest, options?: Partial<CallOptions>): ClientReadableStream<Frames>;
    getDataFramesBetweenTimestamps(request: GetDataFramesBetweenTimestampsRequest, metadata?: Metadata, options?: Partial<CallOptions>): ClientReadableStream<Frames>;
    /**
     * Gets data envelopes between specific timestamps for specific frames from the data buffer.
     * @param request A request message with the from and to timestamps and the frame identifiers.
     * @returns A response message with data envelopes between the specified timestamps.
     */
    getFrameEnvelopes(request: GetFrameEnvelopesRequest, options?: Partial<CallOptions>): ClientReadableStream<GetFrameEnvelopesResponse>;
    getFrameEnvelopes(request: GetFrameEnvelopesRequest, metadata?: Metadata, options?: Partial<CallOptions>): ClientReadableStream<GetFrameEnvelopesResponse>;
    /**
     * Gets all available frame property names that can be used in filters and as metadata in the current measurement setup.
     * @returns A response message with the available frame property names.
     */
    getAvailableFramePropertyNames(request: Empty, callback: (error: ServiceError | null, response: GetAvailableFramePropertyNamesResponse) => void): ClientUnaryCall;
    getAvailableFramePropertyNames(request: Empty, metadata: Metadata, callback: (error: ServiceError | null, response: GetAvailableFramePropertyNamesResponse) => void): ClientUnaryCall;
    getAvailableFramePropertyNames(request: Empty, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetAvailableFramePropertyNamesResponse) => void): ClientUnaryCall;
    /**
     * Gets what protocols that are present in a set of database files.
     * @param request A request message with one or more database file.
     * @returns A response with present protocols.
     */
    getProtocolsInDatabaseFiles(request: GetProtocolsInDatabaseFilesRequest, callback: (error: ServiceError | null, response: GetProtocolsInDatabaseFilesResponse) => void): ClientUnaryCall;
    getProtocolsInDatabaseFiles(request: GetProtocolsInDatabaseFilesRequest, metadata: Metadata, callback: (error: ServiceError | null, response: GetProtocolsInDatabaseFilesResponse) => void): ClientUnaryCall;
    getProtocolsInDatabaseFiles(request: GetProtocolsInDatabaseFilesRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: GetProtocolsInDatabaseFilesResponse) => void): ClientUnaryCall;
    /**
     * Triggers a command to be run on an extension node.
     * @param request A request message with the command id and arguments.
     * @returns A response message with the command result.
     */
    runExtensionCommand(request: RunExtensionCommandRequest, callback: (error: ServiceError | null, response: RunExtensionCommandResponse) => void): ClientUnaryCall;
    runExtensionCommand(request: RunExtensionCommandRequest, metadata: Metadata, callback: (error: ServiceError | null, response: RunExtensionCommandResponse) => void): ClientUnaryCall;
    runExtensionCommand(request: RunExtensionCommandRequest, metadata: Metadata, options: Partial<CallOptions>, callback: (error: ServiceError | null, response: RunExtensionCommandResponse) => void): ClientUnaryCall;
}
export declare const MeasurementServiceClient: {
    new (address: string, credentials: ChannelCredentials, options?: Partial<ClientOptions>): MeasurementServiceClient;
    service: typeof MeasurementServiceService;
    serviceName: string;
};