import inflate from './tiny-inflate'

// Shift size for getting the index-1 table offset.
const SHIFT_1 = 6 + 5;

// Shift size for getting the index-2 table offset.
const SHIFT_2 = 5;

// Difference between the two shift sizes,
// for getting an index-1 offset from an index-2 offset. 6=11-5
const SHIFT_1_2 = SHIFT_1 - SHIFT_2;

// Number of index-1 entries for the BMP. 32=0x20
// This part of the index-1 table is omitted from the serialized form.
const OMITTED_BMP_INDEX_1_LENGTH = 0x10000 >> SHIFT_1;

// Number of entries in an index-2 block. 64=0x40
const INDEX_2_BLOCK_LENGTH = 1 << SHIFT_1_2;

// Mask for getting the lower bits for the in-index-2-block offset. */
const INDEX_2_MASK = INDEX_2_BLOCK_LENGTH - 1;

// Shift size for shifting left the index array values.
// Increases possible data size with 16-bit index values at the cost
// of compactability.
// This requires data blocks to be aligned by DATA_GRANULARITY.
const INDEX_SHIFT = 2;

// Number of entries in a data block. 32=0x20
const DATA_BLOCK_LENGTH = 1 << SHIFT_2;

// Mask for getting the lower bits for the in-data-block offset.
const DATA_MASK = DATA_BLOCK_LENGTH - 1;

// The part of the index-2 table for U+D800..U+DBFF stores values for
// lead surrogate code _units_ not code _points_.
// Values for lead surrogate code _points_ are indexed with this portion of the table.
// Length=32=0x20=0x400>>SHIFT_2. (There are 1024=0x400 lead surrogates.)
const LSCP_INDEX_2_OFFSET = 0x10000 >> SHIFT_2;
const LSCP_INDEX_2_LENGTH = 0x400 >> SHIFT_2;

// Count the lengths of both BMP pieces. 2080=0x820
const INDEX_2_BMP_LENGTH = LSCP_INDEX_2_OFFSET + LSCP_INDEX_2_LENGTH;

// The 2-byte UTF-8 version of the index-2 table follows at offset 2080=0x820.
// Length 32=0x20 for lead bytes C0..DF, regardless of SHIFT_2.
const UTF8_2B_INDEX_2_OFFSET = INDEX_2_BMP_LENGTH;
const UTF8_2B_INDEX_2_LENGTH = 0x800 >> 6;  // U+0800 is the first code point after 2-byte UTF-8

// The index-1 table, only used for supplementary code points, at offset 2112=0x840.
// Variable length, for code points up to highStart, where the last single-value range starts.
// Maximum length 512=0x200=0x100000>>SHIFT_1.
// (For 0x100000 supplementary code points U+10000..U+10ffff.)
//
// The part of the index-2 table for supplementary code points starts
// after this index-1 table.
//
// Both the index-1 table and the following part of the index-2 table
// are omitted completely if there is only BMP data.
const INDEX_1_OFFSET = UTF8_2B_INDEX_2_OFFSET + UTF8_2B_INDEX_2_LENGTH;

// The alignment size of a data block. Also the granularity for compaction.
const DATA_GRANULARITY = 1 << INDEX_SHIFT;

const isBigEndian = (new Uint8Array(new Uint32Array([0x12345678]).buffer)[0] === 0x12);

class UnicodeTrie {
    private data: Uint32Array;
    private highStart: number;
    private errorValue: number;
  constructor(data: Uint8Array) {
      // read binary format
      
        const view = new DataView(data.buffer);
        this.highStart = view.getUint32(0, true);
        this.errorValue = view.getUint32(4, true);
        let uncompressedLength = view.getUint32(8, true);
        data = data.subarray(12);

      // double inflate the actual trie data
      data = inflate(data, new Uint8Array(uncompressedLength));
      data = inflate(data, new Uint8Array(uncompressedLength));

      if (isBigEndian) {
          // swap bytes from little-endian
          const len = data.length;
          for (let i = 0; i < len; i += 4) {
              // Exchange data[i] and data[i + 3]:
              let x = data[i]; data[i] = data[i+3]; data[i+3] = x;
              // Exchange data[i + 1] and data[i + 2]:
              let y = data[i+1]; data[i+1] = data[i+2]; data[i+2] = y;
          }
      }

      this.data = new Uint32Array(data.buffer);

  }

    get(codePoint: number): number {
    let index;
    if ((codePoint < 0) || (codePoint > 0x10ffff)) {
      return this.errorValue;
    }

    if ((codePoint < 0xd800) || ((codePoint > 0xdbff) && (codePoint <= 0xffff))) {
      // Ordinary BMP code point, excluding leading surrogates.
      // BMP uses a single level lookup.  BMP index starts at offset 0 in the index.
      // data is stored in the index array itself.
      index = (this.data[codePoint >> SHIFT_2] << INDEX_SHIFT) + (codePoint & DATA_MASK);
      return this.data[index];
    }

    if (codePoint <= 0xffff) {
      // Lead Surrogate Code Point.  A Separate index section is stored for
      // lead surrogate code units and code points.
      //   The main index has the code unit data.
      //   For this function, we need the code point data.
      index = (this.data[LSCP_INDEX_2_OFFSET + ((codePoint - 0xd800) >> SHIFT_2)] << INDEX_SHIFT) + (codePoint & DATA_MASK);
      return this.data[index];
    }

    if (codePoint < this.highStart) {
      // Supplemental code point, use two-level lookup.
      index = this.data[(INDEX_1_OFFSET - OMITTED_BMP_INDEX_1_LENGTH) + (codePoint >> SHIFT_1)];
      index = this.data[index + ((codePoint >> SHIFT_2) & INDEX_2_MASK)];
      index = (index << INDEX_SHIFT) + (codePoint & DATA_MASK);
      return this.data[index];
    }

    return this.data[this.data.length - DATA_GRANULARITY];
  }
}

export default UnicodeTrie