{
  "t": "Wahid waistcoat",
  "d": "Wahid is a classic fitted waistcoat.",
  "p": {
    "back": "Back",
    "front": "Front",
    "frontFacing": "Front facing",
    "frontLining": "Front lining",
    "pocketBag": "Pocket bag",
    "pocketFacing": "Pocket facing",
    "pocketInterfacing": "Pocket interfacing",
    "pocketWelt": "Pocket welt"
  },
  "s": {
    "cutFrontFacing.t": "The front facing is not shown",
    "cutFrontFacing.d": "The **Front facing** (1a) is not shown, but you can trace it from the Front part (1). Trace the outline on the left of the facing/lining boundary that extends from the tip of the dart to the shoulder seam. \n\nIt is not shown because the **expand** core setting is currently disabled. Enable it to show this pattern part.",
    "cutFrontLining.t": "The front lining is not shown",
    "cutFrontLining.d": "The **Front lining** (1b) is not shown, but you can trace it from the Front part (1). Trace the outline on the right of the facing/lining boundary that extends from the tip of the dart to the shoulder seam. \n\nIt is not shown because the **expand** core setting is currently disabled. Enable it to show this pattern part.",
    "cutPocketWelt.t": "The pocket welt is not shown",
    "cutPocketWelt.d": "The **Pocket welt** (3) is a rectangular piece of fabric {{{ w }}} wide and {{{ l }}} long (this part does not use seam allowance). \n\nIt is not shown because the **expand** core setting is currently disabled. Enable it to show this pattern part.",
    "noBackDart.t": "The back dart is not necessary",
    "noBackDart.d": "Your measurements indicate that a back dart is not necessary, so you can skip this part of the instructions. \n\nSome manual adjustments might be necessary if the chest size measurement is much smaller than the waist and hip size.",
    "cutPocketInterfacing.t": "The pocket interfacing is not shown",
    "cutPocketInterfacing.d": "The **Pocket interfacing** (6) is a rectangular piece of fabric {{{ w }}} wide and {{{ l }}} long (this part does not use seam allowance). \n\nIt is not shown because the **expand** core setting is currently disabled. Enable it to show this pattern part.",
    "flbFacingSide": "Facing/Lining boundary : Facing side",
    "flbLiningSide": "Facing/Lining boundary : Lining side"
  },
  "o": {
    "backScyeDart": {
      "t": "Back scye dart",
      "d": "The amount to take out in a dart at the back of the armhole."
    },
    "frontScyeDart": {
      "t": "Front scye dart",
      "d": "The amount to take out in a dart at the front of the armhole."
    },
    "pocketLocation": {
      "t": "Pocket location",
      "d": "Determines the placement of the pocket"
    },
    "pocketWidth": {
      "t": "Pocket width",
      "d": "Determines the width of the pocket"
    },
    "weltHeight": {
      "t": "Welt height",
      "d": "Determines the height of the welt"
    },
    "necklineDrop": {
      "t": "Neckline drop",
      "d": "Determines how low the neckline drops at the front"
    },
    "frontStyle": {
      "t": "Neck opening style",
      "d": "Style of the neck opening"
    },
    "frontStyle.classic": {
      "t": "Classic",
      "d": "Draft a waistcoat with a classic V-shaped neck opening"
    },
    "frontStyle.rounded": {
      "t": "Rounded",
      "d": "Draft a waistcoat with a rounded V-shaped neck opening"
    },
    "hemStyle": {
      "t": "Hem style",
      "d": "Style of the front hem"
    },
    "hemStyle.classic": {
      "t": "classic",
      "d": "Draft a waistcoat with a classic cut-away hem style"
    },
    "hemStyle.rounded": {
      "t": "Rounded",
      "d": "Draft a waistcoat with a rounded hem style"
    },
    "hemStyle.square": {
      "t": "Straight",
      "d": "Draft a waistcoat with with straight hem"
    },
    "hemRadius": {
      "t": "Hem radius",
      "d": "Radius by which the hem is rounded"
    },
    "backInset": {
      "t": "Back inset",
      "d": "How much the back of the armhole is cut inwards"
    },
    "frontInset": {
      "t": "Front inset",
      "d": "How much the front of the armhole is cut inwards"
    },
    "shoulderInset": {
      "t": "Shoulder inset",
      "d": "How much the shoulder seam is cut inwards at the shoulder"
    },
    "neckInset": {
      "t": "Neck inset",
      "d": "How much the shoulder seam is cut inwards at the neck"
    },
    "pocketAngle": {
      "t": "Pocket angle",
      "d": "Angle of the pocket slant"
    },
    "buttons": {
      "t": "Buttons",
      "d": "The amount of buttons to use."
    },
    "waistEase": {
      "t": "Waist ease",
      "d": "Controls the amount of ease at the waist."
    },
    "hipsEase": {
      "t": "Hips ease",
      "d": "Controls the amount of ease at the hips."
    },
    "centerBackDart": {
      "t": "Center back dart",
      "d": "Whether or not to include a center back dart to fit a rounded back."
    },
    "legacyWaistHips": {
      "t": "Legacy waist and hips widths",
      "d": "Enable this option to use the legacy (v3) way to calculate the waist and hips widths (using chest circumference) rather than the new way (using the waist and hips measurements)."
    },
    "legacyWaistHipsNo": {
      "t": "Calculate waist and hips widths the new way",
      "d": "Uses the waist and hips measurements to calculate the waist and hips widths"
    },
    "legacyWaistHipsYes": {
      "t": "Calculate waist and hips widths the legacy (v3) way",
      "d": "Uses the chest measurement to approximate the waist and hips widths"
    }
  }
}