# VaultsApi

All URIs are relative to https://developers.fireblocks.com/reference/

Method | HTTP request | Description
------------- | ------------- | -------------
[**activateAssetForVaultAccount**](#activateAssetForVaultAccount) | **POST** /vault/accounts/{vaultAccountId}/{assetId}/activate | Activate a wallet in a vault account
[**activateUsdcGatewayWalletBeta**](#activateUsdcGatewayWalletBeta) | **POST** /vault/accounts/{vaultAccountId}/usdc_gateway/activate | Activate a USDC Gateway wallet
[**attachOrDetachTagsFromVaultAccounts**](#attachOrDetachTagsFromVaultAccounts) | **POST** /vault/accounts/attached_tags | Attach or detach tags from vault accounts
[**createLegacyAddress**](#createLegacyAddress) | **POST** /vault/accounts/{vaultAccountId}/{assetId}/addresses/{addressId}/create_legacy | Convert a segwit address to legacy format
[**createMultipleAccounts**](#createMultipleAccounts) | **POST** /vault/accounts/bulk | Bulk creation of new vault accounts
[**createMultipleDepositAddresses**](#createMultipleDepositAddresses) | **POST** /vault/accounts/addresses/bulk | Bulk creation of new deposit addresses
[**createVaultAccount**](#createVaultAccount) | **POST** /vault/accounts | Create a new vault account
[**createVaultAccountAsset**](#createVaultAccountAsset) | **POST** /vault/accounts/{vaultAccountId}/{assetId} | Create a new vault wallet
[**createVaultAccountAssetAddress**](#createVaultAccountAssetAddress) | **POST** /vault/accounts/{vaultAccountId}/{assetId}/addresses | Create new asset deposit address
[**deactivateUsdcGatewayWalletBeta**](#deactivateUsdcGatewayWalletBeta) | **POST** /vault/accounts/{vaultAccountId}/usdc_gateway/deactivate | Deactivate a USDC Gateway wallet
[**disableUsdcGatewayDepositAutomationScheduleBeta**](#disableUsdcGatewayDepositAutomationScheduleBeta) | **DELETE** /vault/accounts/{vaultAccountId}/virtual_asset_wallet/usdc_gateway/deposit_automation/{automationId} | Stop a USDC Gateway deposit automation\&#39;s schedule
[**getAssetWallets**](#getAssetWallets) | **GET** /vault/asset_wallets | Get vault wallets (Paginated)
[**getCreateMultipleDepositAddressesJobStatus**](#getCreateMultipleDepositAddressesJobStatus) | **GET** /vault/accounts/addresses/bulk/{jobId} | Get the job status of the bulk deposit address creation
[**getCreateMultipleVaultAccountsJobStatus**](#getCreateMultipleVaultAccountsJobStatus) | **GET** /vault/accounts/bulk/{jobId} | Get job status of bulk creation of new vault accounts
[**getMaxBipIndexUsed**](#getMaxBipIndexUsed) | **GET** /vault/accounts/{vaultAccountId}/{assetId}/max_bip44_index_used | Get maximum BIP44 index used
[**getMaxSpendableAmount**](#getMaxSpendableAmount) | **GET** /vault/accounts/{vaultAccountId}/{assetId}/max_spendable_amount | Get max spendable amount in a transaction
[**getPagedVaultAccounts**](#getPagedVaultAccounts) | **GET** /vault/accounts_paged | Get vault accounts (Paginated)
[**getPublicKeyInfo**](#getPublicKeyInfo) | **GET** /vault/public_key_info | Get the public key for a derivation path
[**getPublicKeyInfoForAddress**](#getPublicKeyInfoForAddress) | **GET** /vault/accounts/{vaultAccountId}/{assetId}/{change}/{addressIndex}/public_key_info | Get an asset\&#39;s public key
[**getUnspentInputs**](#getUnspentInputs) | **GET** /vault/accounts/{vaultAccountId}/{assetId}/unspent_inputs | Get UTXO unspent inputs information
[**getUsdcGatewayDepositAutomationBeta**](#getUsdcGatewayDepositAutomationBeta) | **GET** /vault/accounts/{vaultAccountId}/virtual_asset_wallet/usdc_gateway/deposit_automation | Read the USDC Gateway deposit automations for a vault account
[**getUsdcGatewayWalletInfoBeta**](#getUsdcGatewayWalletInfoBeta) | **GET** /vault/accounts/{vaultAccountId}/usdc_gateway | Get USDC Gateway wallet info
[**getVaultAccount**](#getVaultAccount) | **GET** /vault/accounts/{vaultAccountId} | Get a vault account by ID
[**getVaultAccountAsset**](#getVaultAccountAsset) | **GET** /vault/accounts/{vaultAccountId}/{assetId} | Get the asset balance for a vault account
[**getVaultAccountAssetAddressesPaginated**](#getVaultAccountAssetAddressesPaginated) | **GET** /vault/accounts/{vaultAccountId}/{assetId}/addresses_paginated | Get addresses (Paginated)
[**getVaultAssets**](#getVaultAssets) | **GET** /vault/assets | Get asset balance for chosen assets
[**getVaultBalanceByAsset**](#getVaultBalanceByAsset) | **GET** /vault/assets/{assetId} | Get vault balance by an asset
[**hideVaultAccount**](#hideVaultAccount) | **POST** /vault/accounts/{vaultAccountId}/hide | Hide a vault account in the console
[**lookupVaultByAddress**](#lookupVaultByAddress) | **GET** /vault/lookup_by_address | Look up a vault account by blockchain address
[**setCustomerRefIdForAddress**](#setCustomerRefIdForAddress) | **POST** /vault/accounts/{vaultAccountId}/{assetId}/addresses/{addressId}/set_customer_ref_id | Assign AML customer reference ID
[**setUsdcGatewayDepositAutomationBeta**](#setUsdcGatewayDepositAutomationBeta) | **POST** /vault/accounts/{vaultAccountId}/virtual_asset_wallet/usdc_gateway/deposit_automation | Set up a USDC Gateway deposit automation for a vault account
[**setVaultAccountAutoFuel**](#setVaultAccountAutoFuel) | **POST** /vault/accounts/{vaultAccountId}/set_auto_fuel | Set auto fueling to on or off
[**setVaultAccountCustomerRefId**](#setVaultAccountCustomerRefId) | **POST** /vault/accounts/{vaultAccountId}/set_customer_ref_id | Set an AML/KYT ID for a vault account
[**unhideVaultAccount**](#unhideVaultAccount) | **POST** /vault/accounts/{vaultAccountId}/unhide | Unhide a vault account in the console
[**updateUsdcGatewayDepositAutomationBeta**](#updateUsdcGatewayDepositAutomationBeta) | **PATCH** /vault/accounts/{vaultAccountId}/virtual_asset_wallet/usdc_gateway/deposit_automation/{automationId} | Change a USDC Gateway deposit automation
[**updateVaultAccount**](#updateVaultAccount) | **PUT** /vault/accounts/{vaultAccountId} | Rename a vault account
[**updateVaultAccountAssetAddress**](#updateVaultAccountAssetAddress) | **PUT** /vault/accounts/{vaultAccountId}/{assetId}/addresses/{addressId} | Update address description
[**updateVaultAccountAssetBalance**](#updateVaultAccountAssetBalance) | **POST** /vault/accounts/{vaultAccountId}/{assetId}/balance | Refresh asset balance data


# **activateAssetForVaultAccount**
> CreateVaultAssetResponse activateAssetForVaultAccount()

Initiates activation for a wallet in a vault account.  Activation is required for tokens that need an on-chain transaction for creation. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiActivateAssetForVaultAccountRequest, CreateVaultAssetResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiActivateAssetForVaultAccountRequest = {
  // string | The ID of the vault account to return, or \'default\' for the default vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
  // string | Optional immutable blockchain wallet type to store per tenant+vault (optional)
  blockchainWalletType: blockchainWalletType_example,
};

fireblocks.vaults.activateAssetForVaultAccount(body).then((res: FireblocksResponse<CreateVaultAssetResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account to return, or \&#39;default\&#39; for the default vault account | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined
 **blockchainWalletType** | [**string**] | Optional immutable blockchain wallet type to store per tenant+vault | (optional) defaults to undefined


### Return type

**[CreateVaultAssetResponse](../models/CreateVaultAssetResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **activateUsdcGatewayWalletBeta**
> UsdcGatewayWalletStatusResponse activateUsdcGatewayWalletBeta()

Activates the USDC Gateway wallet associated with the given vault account. If the wallet does not yet exist it is created in an activated state. **Note:** This endpoint is currently in beta and might be subject to changes. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiActivateUsdcGatewayWalletBetaRequest, UsdcGatewayWalletStatusResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiActivateUsdcGatewayWalletBetaRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.activateUsdcGatewayWalletBeta(body).then((res: FireblocksResponse<UsdcGatewayWalletStatusResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[UsdcGatewayWalletStatusResponse](../models/UsdcGatewayWalletStatusResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | USDC Gateway wallet activated successfully |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **attachOrDetachTagsFromVaultAccounts**
> VaultAccountsTagAttachmentOperationsResponse attachOrDetachTagsFromVaultAccounts(vaultAccountsTagAttachmentOperationsRequest)

Attach or detach one or more tags from the requested vault accounts. Endpoint Permission: For protected tags: Owner, Admin, Non-Signing Admin. For non protected tags: Owner, Admin, Non-Signing Admin, Signer, Editor, Approver.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiAttachOrDetachTagsFromVaultAccountsRequest, VaultAccountsTagAttachmentOperationsResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiAttachOrDetachTagsFromVaultAccountsRequest = {
  // VaultAccountsTagAttachmentOperationsRequest
  vaultAccountsTagAttachmentOperationsRequest: param_value,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.attachOrDetachTagsFromVaultAccounts(body).then((res: FireblocksResponse<VaultAccountsTagAttachmentOperationsResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountsTagAttachmentOperationsRequest** | **[VaultAccountsTagAttachmentOperationsRequest](../models/VaultAccountsTagAttachmentOperationsRequest.md)**|  |
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultAccountsTagAttachmentOperationsResponse](../models/VaultAccountsTagAttachmentOperationsResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | Tags were attached/detached successfully |  * X-Request-ID -  <br>  |
**400** | - Invalid request parameters. - Same tag ID is provided in both tagIdsToAttach and tagIdsToDetach. - Vault accounts are archived.  |  * X-Request-ID -  <br>  |
**404** | - Tags with the requested ID not found. - Vault accounts with the requested ID not found.  |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **createLegacyAddress**
> CreateAddressResponse createLegacyAddress()

Converts an existing segwit address to the legacy format. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiCreateLegacyAddressRequest, CreateAddressResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiCreateLegacyAddressRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // string | The segwit address to translate
  addressId: addressId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.createLegacyAddress(body).then((res: FireblocksResponse<CreateAddressResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **addressId** | [**string**] | The segwit address to translate | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[CreateAddressResponse](../models/CreateAddressResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | The created address |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **createMultipleAccounts**
> JobCreated createMultipleAccounts(createMultipleAccountsRequest)

Create multiple vault accounts by running an async job.       - The HBAR, TON, SUI, TERRA, ALGO, and DOT blockchains are not supported. - These endpoints are currently in beta and might be subject to changes. - Limited to a maximum of 10,000 accounts per operation. - With `vaultType: KEY_LINK`, creates Key Link vault accounts; set `autoAssign: true` to bind them to the workspace\'s signing keys (see `vaultType` and `autoAssign`).  **Endpoint Permissions:** Admin, Non-Signing Admin, Signer, Approver, Editor. 

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiCreateMultipleAccountsRequest, JobCreated } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiCreateMultipleAccountsRequest = {
  // CreateMultipleAccountsRequest
  createMultipleAccountsRequest: param_value,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.createMultipleAccounts(body).then((res: FireblocksResponse<JobCreated>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **createMultipleAccountsRequest** | **[CreateMultipleAccountsRequest](../models/CreateMultipleAccountsRequest.md)**|  |
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[JobCreated](../models/JobCreated.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A JobCreated object |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **createMultipleDepositAddresses**
> JobCreated createMultipleDepositAddresses(createMultipleDepositAddressesRequest)

**For UTXO blockchains only.**  Create multiple deposit addresses by running an async job. - The target Vault account should already have a UTXO asset wallet with a permanent address. - Limited to a maximum of 10,000 addresses per operation. Use multiple operations for the same Vault account/permanent address if needed.  **Endpoint Permissions:** Admin, Non-Signing Admin. 

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiCreateMultipleDepositAddressesRequest, JobCreated } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiCreateMultipleDepositAddressesRequest = {
  // CreateMultipleDepositAddressesRequest
  createMultipleDepositAddressesRequest: param_value,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.createMultipleDepositAddresses(body).then((res: FireblocksResponse<JobCreated>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **createMultipleDepositAddressesRequest** | **[CreateMultipleDepositAddressesRequest](../models/CreateMultipleDepositAddressesRequest.md)**|  |
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[JobCreated](../models/JobCreated.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A JobCreated object |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **createVaultAccount**
> VaultAccount createVaultAccount(createVaultAccountRequest)

Creates a new vault account with the requested name. **Note: ** Vault account names should consist of ASCII characters only. Learn more about Fireblocks Vault Accounts in the following [guide](https://developers.fireblocks.com/reference/create-vault-account). Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiCreateVaultAccountRequest, VaultAccount } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiCreateVaultAccountRequest = {
  // CreateVaultAccountRequest
  createVaultAccountRequest: param_value,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.createVaultAccount(body).then((res: FireblocksResponse<VaultAccount>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **createVaultAccountRequest** | **[CreateVaultAccountRequest](../models/CreateVaultAccountRequest.md)**|  |
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultAccount](../models/VaultAccount.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A Vault Account object |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **createVaultAccountAsset**
> CreateVaultAssetResponse createVaultAccountAsset()

Creates a wallet for a specific asset in a vault account. Learn more about Fireblocks Vault Wallets in the following [guide](https://developers.fireblocks.com/reference/create-vault-wallet). Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiCreateVaultAccountAssetRequest, CreateVaultAssetResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiCreateVaultAccountAssetRequest = {
  // string | The ID of the vault account to return, or \'default\' for the default vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // CreateAssetsRequest (optional)
  createAssetsRequest: param_value,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
  // string | Optional immutable blockchain wallet type to store per tenant+vault (optional)
  blockchainWalletType: blockchainWalletType_example,
};

fireblocks.vaults.createVaultAccountAsset(body).then((res: FireblocksResponse<CreateVaultAssetResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **createAssetsRequest** | **[CreateAssetsRequest](../models/CreateAssetsRequest.md)**|  |
 **vaultAccountId** | [**string**] | The ID of the vault account to return, or \&#39;default\&#39; for the default vault account | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined
 **blockchainWalletType** | [**string**] | Optional immutable blockchain wallet type to store per tenant+vault | (optional) defaults to undefined


### Return type

**[CreateVaultAssetResponse](../models/CreateVaultAssetResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **createVaultAccountAssetAddress**
> CreateAddressResponse createVaultAccountAssetAddress()

Creates a new deposit address for an asset of a vault account. Should be used for UTXO or Tag/Memo based assets ONLY.  Requests with account based assets will fail.  Endpoint Permission: Admin, Non-Signing Admin.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiCreateVaultAccountAssetAddressRequest, CreateAddressResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiCreateVaultAccountAssetAddressRequest = {
  // string | The ID of the vault account to return
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // CreateAddressRequest (optional)
  createAddressRequest: param_value,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.createVaultAccountAssetAddress(body).then((res: FireblocksResponse<CreateAddressResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **createAddressRequest** | **[CreateAddressRequest](../models/CreateAddressRequest.md)**|  |
 **vaultAccountId** | [**string**] | The ID of the vault account to return | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[CreateAddressResponse](../models/CreateAddressResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | The created address |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **deactivateUsdcGatewayWalletBeta**
> UsdcGatewayWalletStatusResponse deactivateUsdcGatewayWalletBeta()

Deactivates the USDC Gateway wallet associated with the given vault account. **Note:** This endpoint is currently in beta and might be subject to changes. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiDeactivateUsdcGatewayWalletBetaRequest, UsdcGatewayWalletStatusResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiDeactivateUsdcGatewayWalletBetaRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.deactivateUsdcGatewayWalletBeta(body).then((res: FireblocksResponse<UsdcGatewayWalletStatusResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[UsdcGatewayWalletStatusResponse](../models/UsdcGatewayWalletStatusResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | USDC Gateway wallet deactivated successfully |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **disableUsdcGatewayDepositAutomationScheduleBeta**
> disableUsdcGatewayDepositAutomationScheduleBeta()

Stops the schedule for an existing deposit automation. The automation itself stays configured, only its schedule stops. Turn it back on later with PATCH, without setting up the automation again from scratch. **Note:** This endpoint is currently in beta and might be subject to changes. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiDisableUsdcGatewayDepositAutomationScheduleBetaRequest } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiDisableUsdcGatewayDepositAutomationScheduleBetaRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the deposit automation, returned when it was created or read
  automationId: 38400000-8cf0-11bd-b23e-10b96e4ef00d,
};

fireblocks.vaults.disableUsdcGatewayDepositAutomationScheduleBeta(body).then((res: FireblocksResponse<any>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **automationId** | [**string**] | The ID of the deposit automation, returned when it was created or read | defaults to undefined


### Return type

void (empty response body)

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**204** | Deposit automation schedule disabled |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getAssetWallets**
> PaginatedAssetWalletResponse getAssetWallets()

Get all vault wallets of the vault accounts in your workspace.  A vault wallet is an asset in a vault account.   This method allows fast traversal of all account balances. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetAssetWalletsRequest, PaginatedAssetWalletResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetAssetWalletsRequest = {
  // number | When specified, only vault wallets with total balance greater than this amount are returned. (optional)
  totalAmountLargerThan: 8.14,
  // string | When specified, only vault wallets with the specified ID are returned. (optional)
  assetId: assetId_example,
  // 'ASC' | 'DESC' (optional)
  orderBy: orderBy_example,
  // string | Fetches the next paginated response before this element.  This element is a cursor and is returned at the response of the previous page.  (optional)
  before: before_example,
  // string | Fetches the next paginated response after this element. This element is a cursor and is returned at the response of the previous page. (optional)
  after: after_example,
  // number | The maximum number of vault wallets in a single response.   The default is 200 and the maximum is 1000.  (optional)
  limit: 8.14,
};

fireblocks.vaults.getAssetWallets(body).then((res: FireblocksResponse<PaginatedAssetWalletResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **totalAmountLargerThan** | [**number**] | When specified, only vault wallets with total balance greater than this amount are returned. | (optional) defaults to undefined
 **assetId** | [**string**] | When specified, only vault wallets with the specified ID are returned. | (optional) defaults to undefined
 **orderBy** | [**&#39;ASC&#39; | &#39;DESC&#39;**]**Array<&#39;ASC&#39; &#124; &#39;DESC&#39;>** |  | (optional) defaults to 'DESC'
 **before** | [**string**] | Fetches the next paginated response before this element.  This element is a cursor and is returned at the response of the previous page.  | (optional) defaults to undefined
 **after** | [**string**] | Fetches the next paginated response after this element. This element is a cursor and is returned at the response of the previous page. | (optional) defaults to undefined
 **limit** | [**number**] | The maximum number of vault wallets in a single response.   The default is 200 and the maximum is 1000.  | (optional) defaults to 200


### Return type

**[PaginatedAssetWalletResponse](../models/PaginatedAssetWalletResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A PaginatedAssetWalletResponse object |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getCreateMultipleDepositAddressesJobStatus**
> CreateMultipleDepositAddressesJobStatus getCreateMultipleDepositAddressesJobStatus()

Returns the current status of (or an error for) the specified deposit addresss bulk creation job.  **Endpoint Permissions:** Admin, Non-Signing Admin, Signer, Approver, Editor, and Viewer. 

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetCreateMultipleDepositAddressesJobStatusRequest, CreateMultipleDepositAddressesJobStatus } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetCreateMultipleDepositAddressesJobStatusRequest = {
  // string | The ID of the job to create addresses
  jobId: 019681b4-107d-7243-942d-4c3c30e36fae,
};

fireblocks.vaults.getCreateMultipleDepositAddressesJobStatus(body).then((res: FireblocksResponse<CreateMultipleDepositAddressesJobStatus>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **jobId** | [**string**] | The ID of the job to create addresses | defaults to undefined


### Return type

**[CreateMultipleDepositAddressesJobStatus](../models/CreateMultipleDepositAddressesJobStatus.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A Job with status |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getCreateMultipleVaultAccountsJobStatus**
> CreateMultipleVaultAccountsJobStatus getCreateMultipleVaultAccountsJobStatus()

Returns the current status of (or error for) the specified vault account bulk creation job.  **Endpoint Permissions:** Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer. 

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetCreateMultipleVaultAccountsJobStatusRequest, CreateMultipleVaultAccountsJobStatus } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetCreateMultipleVaultAccountsJobStatusRequest = {
  // string | The ID of the job to create addresses
  jobId: 019681b4-107d-7243-942d-4c3c30e36fae,
};

fireblocks.vaults.getCreateMultipleVaultAccountsJobStatus(body).then((res: FireblocksResponse<CreateMultipleVaultAccountsJobStatus>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **jobId** | [**string**] | The ID of the job to create addresses | defaults to undefined


### Return type

**[CreateMultipleVaultAccountsJobStatus](../models/CreateMultipleVaultAccountsJobStatus.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A Job with status |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getMaxBipIndexUsed**
> GetMaxBipIndexUsedResponse getMaxBipIndexUsed()

Retrieves the maximum BIP44 address index and change address index used for a specific asset in a vault account (BIP44 standard).

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetMaxBipIndexUsedRequest, GetMaxBipIndexUsedResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetMaxBipIndexUsedRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
};

fireblocks.vaults.getMaxBipIndexUsed(body).then((res: FireblocksResponse<GetMaxBipIndexUsedResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined


### Return type

**[GetMaxBipIndexUsedResponse](../models/GetMaxBipIndexUsedResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getMaxSpendableAmount**
> GetMaxSpendableAmountResponse getMaxSpendableAmount()

**UTXO assets only.**  Retrieve the maximum amount of the specified asset that can be spent in a single transaction from the specified vault account.  **Endpoint Permissions:** Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer. 

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetMaxSpendableAmountRequest, GetMaxSpendableAmountResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetMaxSpendableAmountRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // boolean | False by default. The maximum number of inputs depends if the transaction will be signed by an automated co-signer server or on a mobile device. (optional)
  manualSignging: true,
  // Array<string> | Only include UTXOs that have ALL of these labels (AND logic). Requires the UTXO Manager. (optional)
  includeAllLabels: param_value,
  // Array<string> | Only include UTXOs that have ANY of these labels (OR logic). Requires the UTXO Manager. (optional)
  includeAnyLabels: param_value,
  // Array<string> | Exclude UTXOs that have ANY of these labels. Requires the UTXO Manager. (optional)
  excludeAnyLabels: param_value,
  // string | Only include UTXOs from this specific address. Requires the UTXO Manager. (optional)
  address: address_example,
  // string | Minimum UTXO amount in the asset\'s base unit. Requires the UTXO Manager. (optional)
  minAmount: minAmount_example,
  // string | Maximum UTXO amount in the asset\'s base unit. Requires the UTXO Manager. (optional)
  maxAmount: maxAmount_example,
};

fireblocks.vaults.getMaxSpendableAmount(body).then((res: FireblocksResponse<GetMaxSpendableAmountResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **manualSignging** | [**boolean**] | False by default. The maximum number of inputs depends if the transaction will be signed by an automated co-signer server or on a mobile device. | (optional) defaults to undefined
 **includeAllLabels** | **Array&lt;string&gt;** | Only include UTXOs that have ALL of these labels (AND logic). Requires the UTXO Manager. | (optional) defaults to undefined
 **includeAnyLabels** | **Array&lt;string&gt;** | Only include UTXOs that have ANY of these labels (OR logic). Requires the UTXO Manager. | (optional) defaults to undefined
 **excludeAnyLabels** | **Array&lt;string&gt;** | Exclude UTXOs that have ANY of these labels. Requires the UTXO Manager. | (optional) defaults to undefined
 **address** | [**string**] | Only include UTXOs from this specific address. Requires the UTXO Manager. | (optional) defaults to undefined
 **minAmount** | [**string**] | Minimum UTXO amount in the asset\&#39;s base unit. Requires the UTXO Manager. | (optional) defaults to undefined
 **maxAmount** | [**string**] | Maximum UTXO amount in the asset\&#39;s base unit. Requires the UTXO Manager. | (optional) defaults to undefined


### Return type

**[GetMaxSpendableAmountResponse](../models/GetMaxSpendableAmountResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getPagedVaultAccounts**
> VaultAccountsPagedResponse getPagedVaultAccounts()

Gets all vault accounts in your workspace. This endpoint returns a limited amount of results with a quick response time. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetPagedVaultAccountsRequest, VaultAccountsPagedResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetPagedVaultAccountsRequest = {
  // string (optional)
  namePrefix: namePrefix_example,
  // string (optional)
  nameSuffix: nameSuffix_example,
  // number | Specifying minAmountThreshold will filter accounts whose total balance is greater than this value; otherwise, it returns all accounts. The amount set in this parameter represents the native asset amount, not its USD value. (optional)
  minAmountThreshold: 10,
  // string (optional)
  assetId: assetId_example,
  // 'ASC' | 'DESC' (optional)
  orderBy: orderBy_example,
  // string (optional)
  before: before_example,
  // string (optional)
  after: after_example,
  // number (optional)
  limit: 8.14,
  // Array<string> | DEPRECATED - use includeTagIds instead (optional)
  tagIds: param_value,
  // Array<string> | List of tag IDs to include. Vault accounts with any of these tags will be included (optional)
  includeTagIds: param_value,
  // Array<string> | List of tag IDs to exclude. Vault accounts with any of these tags will be filtered out (optional)
  excludeTagIds: param_value,
};

fireblocks.vaults.getPagedVaultAccounts(body).then((res: FireblocksResponse<VaultAccountsPagedResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **namePrefix** | [**string**] |  | (optional) defaults to undefined
 **nameSuffix** | [**string**] |  | (optional) defaults to undefined
 **minAmountThreshold** | [**number**] | Specifying minAmountThreshold will filter accounts whose total balance is greater than this value; otherwise, it returns all accounts. The amount set in this parameter represents the native asset amount, not its USD value. | (optional) defaults to undefined
 **assetId** | [**string**] |  | (optional) defaults to undefined
 **orderBy** | [**&#39;ASC&#39; | &#39;DESC&#39;**]**Array<&#39;ASC&#39; &#124; &#39;DESC&#39;>** |  | (optional) defaults to 'DESC'
 **before** | [**string**] |  | (optional) defaults to undefined
 **after** | [**string**] |  | (optional) defaults to undefined
 **limit** | [**number**] |  | (optional) defaults to 200
 **tagIds** | **Array&lt;string&gt;** | DEPRECATED - use includeTagIds instead | (optional) defaults to undefined
 **includeTagIds** | **Array&lt;string&gt;** | List of tag IDs to include. Vault accounts with any of these tags will be included | (optional) defaults to undefined
 **excludeTagIds** | **Array&lt;string&gt;** | List of tag IDs to exclude. Vault accounts with any of these tags will be filtered out | (optional) defaults to undefined


### Return type

**[VaultAccountsPagedResponse](../models/VaultAccountsPagedResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A VaultAccountsPagedResponse object |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getPublicKeyInfo**
> PublicKeyInformation getPublicKeyInfo()

Gets the public key information based on derivation path and signing algorithm. Endpoint Permission: Admin, Non-Signing Admin.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetPublicKeyInfoRequest, PublicKeyInformation } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetPublicKeyInfoRequest = {
  // string
  derivationPath: derivationPath_example,
  // string
  algorithm: algorithm_example,
  // boolean (optional)
  compressed: true,
};

fireblocks.vaults.getPublicKeyInfo(body).then((res: FireblocksResponse<PublicKeyInformation>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **derivationPath** | [**string**] |  | defaults to undefined
 **algorithm** | [**string**] |  | defaults to undefined
 **compressed** | [**boolean**] |  | (optional) defaults to undefined


### Return type

**[PublicKeyInformation](../models/PublicKeyInformation.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | Public key information |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getPublicKeyInfoForAddress**
> PublicKeyInformation getPublicKeyInfoForAddress()

Get the public key information for a specific asset in a vault account. Endpoint Permission: Admin, Non-Signing Admin.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetPublicKeyInfoForAddressRequest, PublicKeyInformation } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetPublicKeyInfoForAddressRequest = {
  // string
  vaultAccountId: vaultAccountId_example,
  // string
  assetId: assetId_example,
  // number
  change: 8.14,
  // number
  addressIndex: 8.14,
  // boolean (optional)
  compressed: true,
};

fireblocks.vaults.getPublicKeyInfoForAddress(body).then((res: FireblocksResponse<PublicKeyInformation>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] |  | defaults to undefined
 **assetId** | [**string**] |  | defaults to undefined
 **change** | [**number**] |  | defaults to undefined
 **addressIndex** | [**number**] |  | defaults to undefined
 **compressed** | [**boolean**] |  | (optional) defaults to undefined


### Return type

**[PublicKeyInformation](../models/PublicKeyInformation.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | Public Key Information |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getUnspentInputs**
> GetUnspentInputsResponse getUnspentInputs()

Returns unspent inputs information of an UTXO asset in a vault account.  Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetUnspentInputsRequest, GetUnspentInputsResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetUnspentInputsRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
};

fireblocks.vaults.getUnspentInputs(body).then((res: FireblocksResponse<GetUnspentInputsResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined


### Return type

**[GetUnspentInputsResponse](../models/GetUnspentInputsResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | List of Unspent information per input |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getUsdcGatewayDepositAutomationBeta**
> GetAutomationSettingsResponse getUsdcGatewayDepositAutomationBeta()

Returns the USDC Gateway deposit automations configured for the given vault account. **Note:** This endpoint is currently in beta and might be subject to changes. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetUsdcGatewayDepositAutomationBetaRequest, GetAutomationSettingsResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetUsdcGatewayDepositAutomationBetaRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
};

fireblocks.vaults.getUsdcGatewayDepositAutomationBeta(body).then((res: FireblocksResponse<GetAutomationSettingsResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined


### Return type

**[GetAutomationSettingsResponse](../models/GetAutomationSettingsResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | USDC Gateway deposit automations |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getUsdcGatewayWalletInfoBeta**
> UsdcGatewayWalletInfoResponse getUsdcGatewayWalletInfoBeta()

Returns the USDC Gateway wallet information associated with the given vault account. **Note:** This endpoint is currently in beta and might be subject to changes. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetUsdcGatewayWalletInfoBetaRequest, UsdcGatewayWalletInfoResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetUsdcGatewayWalletInfoBetaRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
};

fireblocks.vaults.getUsdcGatewayWalletInfoBeta(body).then((res: FireblocksResponse<UsdcGatewayWalletInfoResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined


### Return type

**[UsdcGatewayWalletInfoResponse](../models/UsdcGatewayWalletInfoResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | USDC Gateway wallet information |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getVaultAccount**
> VaultAccount getVaultAccount()

Get a vault account by its unique ID. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetVaultAccountRequest, VaultAccount } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetVaultAccountRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
};

fireblocks.vaults.getVaultAccount(body).then((res: FireblocksResponse<VaultAccount>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined


### Return type

**[VaultAccount](../models/VaultAccount.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A Vault Account object |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getVaultAccountAsset**
> VaultAsset getVaultAccountAsset()

Returns a specific vault wallet balance information for a specific asset.  Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor,   Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetVaultAccountAssetRequest, VaultAsset } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetVaultAccountAssetRequest = {
  // string | The ID of the vault account to return
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
};

fireblocks.vaults.getVaultAccountAsset(body).then((res: FireblocksResponse<VaultAsset>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account to return | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined


### Return type

**[VaultAsset](../models/VaultAsset.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A VaultAsset object |  -  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getVaultAccountAssetAddressesPaginated**
> PaginatedAddressResponse getVaultAccountAssetAddressesPaginated()

Returns a paginated response of the addresses for a given vault account and asset. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetVaultAccountAssetAddressesPaginatedRequest, PaginatedAddressResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetVaultAccountAssetAddressesPaginatedRequest = {
  // string | The ID of the vault account to return
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // number (optional)
  limit: 8.14,
  // string (optional)
  before: before_example,
  // string (optional)
  after: after_example,
};

fireblocks.vaults.getVaultAccountAssetAddressesPaginated(body).then((res: FireblocksResponse<PaginatedAddressResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account to return | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **limit** | [**number**] |  | (optional) defaults to undefined
 **before** | [**string**] |  | (optional) defaults to undefined
 **after** | [**string**] |  | (optional) defaults to undefined


### Return type

**[PaginatedAddressResponse](../models/PaginatedAddressResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A paginated list of addresses, and pagination info. |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getVaultAssets**
> GetVaultAssetsResponse getVaultAssets()

Gets the assets amount summary for all accounts or filtered accounts.  Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetVaultAssetsRequest, GetVaultAssetsResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetVaultAssetsRequest = {
  // string (optional)
  accountNamePrefix: accountNamePrefix_example,
  // string (optional)
  accountNameSuffix: accountNameSuffix_example,
};

fireblocks.vaults.getVaultAssets(body).then((res: FireblocksResponse<GetVaultAssetsResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **accountNamePrefix** | [**string**] |  | (optional) defaults to undefined
 **accountNameSuffix** | [**string**] |  | (optional) defaults to undefined


### Return type

**[GetVaultAssetsResponse](../models/GetVaultAssetsResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | Amount by asset |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **getVaultBalanceByAsset**
> VaultAsset getVaultBalanceByAsset()

Get the total balance of an asset across all the vault accounts.  Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor, Viewer.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiGetVaultBalanceByAssetRequest, VaultAsset } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiGetVaultBalanceByAssetRequest = {
  // string
  assetId: assetId_example,
};

fireblocks.vaults.getVaultBalanceByAsset(body).then((res: FireblocksResponse<VaultAsset>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **assetId** | [**string**] |  | defaults to undefined


### Return type

**[VaultAsset](../models/VaultAsset.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | Vault amount by asset |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **hideVaultAccount**
> VaultActionStatus hideVaultAccount()

Hides the requested vault account from the web console view. This operation is required when creating thousands of vault accounts to serve your end-users. Used for preventing the web console to be swamped with too much vault accounts. Learn more in the following [guide](https://developers.fireblocks.com/docs/create-direct-custody-wallets#hiding-vault-accounts). NOTE: Hiding the vault account from the web console will also hide all the related transactions to/from this vault. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiHideVaultAccountRequest, VaultActionStatus } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiHideVaultAccountRequest = {
  // string | The vault account to hide
  vaultAccountId: vaultAccountId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.hideVaultAccount(body).then((res: FireblocksResponse<VaultActionStatus>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The vault account to hide | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultActionStatus](../models/VaultActionStatus.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**201** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **lookupVaultByAddress**
> AddressReverseLookupResponse lookupVaultByAddress()

Resolves a blockchain address to the vault account that owns it. Returns the vault account ID and the blockchains associated with the address. **Note:** This endpoint is currently in beta and might be subject to changes. 

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiLookupVaultByAddressRequest, AddressReverseLookupResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiLookupVaultByAddressRequest = {
  // string | The blockchain address to resolve.
  address: address_example,
};

fireblocks.vaults.lookupVaultByAddress(body).then((res: FireblocksResponse<AddressReverseLookupResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **address** | [**string**] | The blockchain address to resolve. | defaults to undefined


### Return type

**[AddressReverseLookupResponse](../models/AddressReverseLookupResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | Vault account that owns the address, with associated blockchains. |  * X-Request-ID -  <br>  |
**401** | Unauthorized. Missing / invalid JWT token in Authorization header. |  * X-Request-ID -  <br>  |
**403** | Feature is not enabled for the workspace. |  * X-Request-ID -  <br>  |
**404** | Vault account not found for the supplied address |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **setCustomerRefIdForAddress**
> VaultActionStatus setCustomerRefIdForAddress(setCustomerRefIdForAddressRequest, )

Sets an AML/KYT customer reference ID for a specific address. Endpoint Permission: Admin, Non-Signing Admin.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiSetCustomerRefIdForAddressRequest, VaultActionStatus } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiSetCustomerRefIdForAddressRequest = {
  // SetCustomerRefIdForAddressRequest
  setCustomerRefIdForAddressRequest: param_value,
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // string | The address for which to add a description. For XRP, use <address>:<tag>, for all other assets, use only the address
  addressId: addressId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.setCustomerRefIdForAddress(body).then((res: FireblocksResponse<VaultActionStatus>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **setCustomerRefIdForAddressRequest** | **[SetCustomerRefIdForAddressRequest](../models/SetCustomerRefIdForAddressRequest.md)**|  |
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **addressId** | [**string**] | The address for which to add a description. For XRP, use &lt;address&gt;:&lt;tag&gt;, for all other assets, use only the address | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultActionStatus](../models/VaultActionStatus.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**201** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **setUsdcGatewayDepositAutomationBeta**
> SaveAutomationSettingsResponse setUsdcGatewayDepositAutomationBeta(automationSettingsRequest, )

Turns on automatic deposits into the USDC Gateway wallet for the given vault account, on the schedule you choose. Returns an error if an automation already exists for this vault account and asset. Use PATCH to change it instead. **Note:** This endpoint is currently in beta and might be subject to changes. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiSetUsdcGatewayDepositAutomationBetaRequest, SaveAutomationSettingsResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiSetUsdcGatewayDepositAutomationBetaRequest = {
  // AutomationSettingsRequest
  automationSettingsRequest: param_value,
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.setUsdcGatewayDepositAutomationBeta(body).then((res: FireblocksResponse<SaveAutomationSettingsResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **automationSettingsRequest** | **[AutomationSettingsRequest](../models/AutomationSettingsRequest.md)**|  |
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[SaveAutomationSettingsResponse](../models/SaveAutomationSettingsResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**201** | Deposit automation created |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **setVaultAccountAutoFuel**
> VaultActionStatus setVaultAccountAutoFuel(setAutoFuelRequest, )

Toggles the auto fueling property of the vault account to enabled or disabled. Vault Accounts with \'autoFuel=true\' are monitored and auto fueled by the Fireblocks Gas Station. Learn more about the Fireblocks Gas Station in the following [guide](https://developers.fireblocks.com/docs/work-with-gas-station). Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiSetVaultAccountAutoFuelRequest, VaultActionStatus } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiSetVaultAccountAutoFuelRequest = {
  // SetAutoFuelRequest
  setAutoFuelRequest: param_value,
  // string | The vault account ID
  vaultAccountId: vaultAccountId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.setVaultAccountAutoFuel(body).then((res: FireblocksResponse<VaultActionStatus>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **setAutoFuelRequest** | **[SetAutoFuelRequest](../models/SetAutoFuelRequest.md)**|  |
 **vaultAccountId** | [**string**] | The vault account ID | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultActionStatus](../models/VaultActionStatus.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**201** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **setVaultAccountCustomerRefId**
> VaultActionStatus setVaultAccountCustomerRefId(setCustomerRefIdRequest, )

Assigns an AML/KYT customer reference ID for the vault account. Learn more about Fireblocks AML management in the following [guide](https://developers.fireblocks.com/docs/define-aml-policies). Endpoint Permission: Admin, Non-Signing Admin.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiSetVaultAccountCustomerRefIdRequest, VaultActionStatus } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiSetVaultAccountCustomerRefIdRequest = {
  // SetCustomerRefIdRequest
  setCustomerRefIdRequest: param_value,
  // string | The vault account ID
  vaultAccountId: vaultAccountId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.setVaultAccountCustomerRefId(body).then((res: FireblocksResponse<VaultActionStatus>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **setCustomerRefIdRequest** | **[SetCustomerRefIdRequest](../models/SetCustomerRefIdRequest.md)**|  |
 **vaultAccountId** | [**string**] | The vault account ID | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultActionStatus](../models/VaultActionStatus.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**201** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **unhideVaultAccount**
> VaultActionStatus unhideVaultAccount()

Makes a hidden vault account visible in web console view. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiUnhideVaultAccountRequest, VaultActionStatus } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiUnhideVaultAccountRequest = {
  // string | The vault account to unhide
  vaultAccountId: vaultAccountId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.unhideVaultAccount(body).then((res: FireblocksResponse<VaultActionStatus>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The vault account to unhide | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultActionStatus](../models/VaultActionStatus.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**201** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **updateUsdcGatewayDepositAutomationBeta**
> AutomationSettingsResponse updateUsdcGatewayDepositAutomationBeta(updateAutomationSettingsRequest, )

Changes an existing USDC Gateway deposit automation for a vault account. **Note:** This endpoint is currently in beta and might be subject to changes. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiUpdateUsdcGatewayDepositAutomationBetaRequest, AutomationSettingsResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiUpdateUsdcGatewayDepositAutomationBetaRequest = {
  // UpdateAutomationSettingsRequest
  updateAutomationSettingsRequest: param_value,
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the deposit automation, returned when it was created or read
  automationId: 38400000-8cf0-11bd-b23e-10b96e4ef00d,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.updateUsdcGatewayDepositAutomationBeta(body).then((res: FireblocksResponse<AutomationSettingsResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **updateAutomationSettingsRequest** | **[UpdateAutomationSettingsRequest](../models/UpdateAutomationSettingsRequest.md)**|  |
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **automationId** | [**string**] | The ID of the deposit automation, returned when it was created or read | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[AutomationSettingsResponse](../models/AutomationSettingsResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | Deposit automation updated |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **updateVaultAccount**
> RenameVaultAccountResponse updateVaultAccount(updateVaultAccountRequest, )

Renames the requested vault account. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiUpdateVaultAccountRequest, RenameVaultAccountResponse } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiUpdateVaultAccountRequest = {
  // UpdateVaultAccountRequest
  updateVaultAccountRequest: param_value,
  // string | The ID of the vault account to edit
  vaultAccountId: vaultAccountId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.updateVaultAccount(body).then((res: FireblocksResponse<RenameVaultAccountResponse>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **updateVaultAccountRequest** | **[UpdateVaultAccountRequest](../models/UpdateVaultAccountRequest.md)**|  |
 **vaultAccountId** | [**string**] | The ID of the vault account to edit | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[RenameVaultAccountResponse](../models/RenameVaultAccountResponse.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**201** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **updateVaultAccountAssetAddress**
> VaultActionStatus updateVaultAccountAssetAddress()

Updates the description of an existing address of an asset in a vault account. Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiUpdateVaultAccountAssetAddressRequest, VaultActionStatus } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiUpdateVaultAccountAssetAddressRequest = {
  // string | The ID of the vault account
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // string | The address for which to add a description. For XRP, use <address>:<tag>, for all other assets, use only the address
  addressId: addressId_example,
  // UpdateVaultAccountAssetAddressRequest (optional)
  updateVaultAccountAssetAddressRequest: param_value,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.updateVaultAccountAssetAddress(body).then((res: FireblocksResponse<VaultActionStatus>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **updateVaultAccountAssetAddressRequest** | **[UpdateVaultAccountAssetAddressRequest](../models/UpdateVaultAccountAssetAddressRequest.md)**|  |
 **vaultAccountId** | [**string**] | The ID of the vault account | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **addressId** | [**string**] | The address for which to add a description. For XRP, use &lt;address&gt;:&lt;tag&gt;, for all other assets, use only the address | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultActionStatus](../models/VaultActionStatus.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: application/json
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**201** | OK |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)

# **updateVaultAccountAssetBalance**
> VaultAsset updateVaultAccountAssetBalance()

Updates the balance of a specific asset in a vault account.  This API endpoint is subject to a strict rate limit. Should be used by clients in very specific scenarios.  Endpoint Permission: Admin, Non-Signing Admin, Signer, Approver, Editor.

### Example


```typescript
import { readFileSync } from 'fs';
import { Fireblocks, BasePath } from '@fireblocks/ts-sdk';
import type { FireblocksResponse, VaultsApiUpdateVaultAccountAssetBalanceRequest, VaultAsset } from '@fireblocks/ts-sdk';

// Set the environment variables for authentication
process.env.FIREBLOCKS_BASE_PATH = BasePath.Sandbox; // or assign directly to "https://sandbox-api.fireblocks.io/v1"
process.env.FIREBLOCKS_API_KEY = "my-api-key";
process.env.FIREBLOCKS_SECRET_KEY = readFileSync("./fireblocks_secret.key", "utf8");

const fireblocks = new Fireblocks();

let body: VaultsApiUpdateVaultAccountAssetBalanceRequest = {
  // string | The ID of the vault account to return
  vaultAccountId: vaultAccountId_example,
  // string | The ID of the asset
  assetId: assetId_example,
  // string | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. (optional)
  idempotencyKey: idempotencyKey_example,
};

fireblocks.vaults.updateVaultAccountAssetBalance(body).then((res: FireblocksResponse<VaultAsset>) => {
  console.log('API called successfully. Returned data: ' + JSON.stringify(res, null, 2));
}).catch((error:any) => console.error(error));
```


### Parameters

Name | Type | Description  | Notes
------------- | ------------- | ------------- | -------------
 **vaultAccountId** | [**string**] | The ID of the vault account to return | defaults to undefined
 **assetId** | [**string**] | The ID of the asset | defaults to undefined
 **idempotencyKey** | [**string**] | A unique identifier for the request. If the request is sent multiple times with the same idempotency key, the server will return the same response as the first request. The idempotency key is valid for 24 hours. | (optional) defaults to undefined


### Return type

**[VaultAsset](../models/VaultAsset.md)**

### Authorization

No authorization required

### HTTP request headers

 - **Content-Type**: Not defined
 - **Accept**: application/json


### HTTP response details
| Status code | Description | Response headers |
|-------------|-------------|------------------|
**200** | A VaultAsset object |  * X-Request-ID -  <br>  |
**0** | Error Response |  * X-Request-ID -  <br>  |

[[Back to top]](#) [[Back to API list]](../../README.md#documentation-for-api-endpoints) [[Back to Model list]](../../README.md#documentation-for-models) [[Back to README]](../../README.md)


