OCC.StepElement module¶

class Handle_StepElement_AnalysisItemWithinRepresentation(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_Curve3dElementDescriptor(*args)¶

Bases: OCC.StepElement.Handle_StepElement_ElementDescriptor

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_CurveElementEndReleasePacket(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_CurveElementFreedomMember(*args)¶

Bases: object

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_CurveElementPurposeMember(*args)¶

Bases: object

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_CurveElementSectionDefinition(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_CurveElementSectionDerivedDefinitions(*args)¶

Bases: OCC.StepElement.Handle_StepElement_CurveElementSectionDefinition

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_ElementAspectMember(*args)¶

Bases: object

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_ElementDescriptor(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_ElementMaterial(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray1OfCurveElementEndReleasePacket(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray1OfCurveElementSectionDefinition(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray1OfHSequenceOfCurveElementPurposeMember(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray1OfHSequenceOfSurfaceElementPurposeMember(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray1OfSurfaceSection(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray1OfVolumeElementPurpose(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray1OfVolumeElementPurposeMember(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray2OfCurveElementPurposeMember(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray2OfSurfaceElementPurpose(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HArray2OfSurfaceElementPurposeMember(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HSequenceOfCurveElementPurposeMember(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HSequenceOfCurveElementSectionDefinition(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HSequenceOfElementMaterial(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_HSequenceOfSurfaceElementPurposeMember(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_MeasureOrUnspecifiedValueMember(*args)¶

Bases: object

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SequenceNodeOfSequenceOfCurveElementPurposeMember(*args)¶

Bases: OCC.TCollection.Handle_TCollection_SeqNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SequenceNodeOfSequenceOfCurveElementSectionDefinition(*args)¶

Bases: OCC.TCollection.Handle_TCollection_SeqNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SequenceNodeOfSequenceOfElementMaterial(*args)¶

Bases: OCC.TCollection.Handle_TCollection_SeqNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SequenceNodeOfSequenceOfSurfaceElementPurposeMember(*args)¶

Bases: OCC.TCollection.Handle_TCollection_SeqNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_Surface3dElementDescriptor(*args)¶

Bases: OCC.StepElement.Handle_StepElement_ElementDescriptor

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SurfaceElementProperty(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SurfaceElementPurposeMember(*args)¶

Bases: object

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SurfaceSection(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SurfaceSectionField(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SurfaceSectionFieldConstant(*args)¶

Bases: OCC.StepElement.Handle_StepElement_SurfaceSectionField

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_SurfaceSectionFieldVarying(*args)¶

Bases: OCC.StepElement.Handle_StepElement_SurfaceSectionField

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_UniformSurfaceSection(*args)¶

Bases: OCC.StepElement.Handle_StepElement_SurfaceSection

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_Volume3dElementDescriptor(*args)¶

Bases: OCC.StepElement.Handle_StepElement_ElementDescriptor

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_StepElement_VolumeElementPurposeMember(*args)¶

Bases: object

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class StepElement_AnalysisItemWithinRepresentation(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Empty constructor

Return type:	None

Description()¶

Returns field Description

Return type:	Handle_TCollection_HAsciiString

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aName (Handle_TCollection_HAsciiString &) – aDescription (Handle_TCollection_HAsciiString &) – aItem (Handle_StepRepr_RepresentationItem &) – aRep (Handle_StepRepr_Representation &) –
Return type:	None

Item()¶

Returns field Item

Return type:	Handle_StepRepr_RepresentationItem

Name()¶

Returns field Name

Return type:	Handle_TCollection_HAsciiString

Rep()¶

Returns field Rep

Return type:	Handle_StepRepr_Representation

SetDescription()¶

Set field Description

Parameters:	Description (Handle_TCollection_HAsciiString &) –
Return type:	None

SetItem()¶

Set field Item

Parameters:	Item (Handle_StepRepr_RepresentationItem &) –
Return type:	None

SetName()¶

Set field Name

Parameters:	Name (Handle_TCollection_HAsciiString &) –
Return type:	None

SetRep()¶

Set field Rep

Parameters:	Rep (Handle_StepRepr_Representation &) –
Return type:	None

thisown¶: The membership flag

class StepElement_Array1OfCurveElementEndReleasePacket(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (Handle_StepElement_CurveElementEndReleasePacket &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array1OfCurveElementEndReleasePacket &) –
Return type:	StepElement_Array1OfCurveElementEndReleasePacket

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementEndReleasePacket

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (Handle_StepElement_CurveElementEndReleasePacket &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array1OfCurveElementEndReleasePacket &) –
Return type:	StepElement_Array1OfCurveElementEndReleasePacket

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_CurveElementEndReleasePacket &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementEndReleasePacket

thisown¶: The membership flag

class StepElement_Array1OfCurveElementSectionDefinition(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (Handle_StepElement_CurveElementSectionDefinition &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array1OfCurveElementSectionDefinition &) –
Return type:	StepElement_Array1OfCurveElementSectionDefinition

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementSectionDefinition

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (Handle_StepElement_CurveElementSectionDefinition &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array1OfCurveElementSectionDefinition &) –
Return type:	StepElement_Array1OfCurveElementSectionDefinition

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_CurveElementSectionDefinition &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementSectionDefinition

thisown¶: The membership flag

class StepElement_Array1OfHSequenceOfCurveElementPurposeMember(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array1OfHSequenceOfCurveElementPurposeMember &) –
Return type:	StepElement_Array1OfHSequenceOfCurveElementPurposeMember

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_HSequenceOfCurveElementPurposeMember

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array1OfHSequenceOfCurveElementPurposeMember &) –
Return type:	StepElement_Array1OfHSequenceOfCurveElementPurposeMember

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_HSequenceOfCurveElementPurposeMember

thisown¶: The membership flag

class StepElement_Array1OfHSequenceOfSurfaceElementPurposeMember(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array1OfHSequenceOfSurfaceElementPurposeMember &) –
Return type:	StepElement_Array1OfHSequenceOfSurfaceElementPurposeMember

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_HSequenceOfSurfaceElementPurposeMember

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array1OfHSequenceOfSurfaceElementPurposeMember &) –
Return type:	StepElement_Array1OfHSequenceOfSurfaceElementPurposeMember

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_HSequenceOfSurfaceElementPurposeMember

thisown¶: The membership flag

class StepElement_Array1OfMeasureOrUnspecifiedValue(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (StepElement_MeasureOrUnspecifiedValue &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array1OfMeasureOrUnspecifiedValue &) –
Return type:	StepElement_Array1OfMeasureOrUnspecifiedValue

ChangeValue()¶

Parameters:	Index (int) –
Return type:	StepElement_MeasureOrUnspecifiedValue

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array1OfMeasureOrUnspecifiedValue &) –
Return type:	StepElement_Array1OfMeasureOrUnspecifiedValue

SetValue()¶

Parameters:	Index (int) – Value (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	StepElement_MeasureOrUnspecifiedValue

thisown¶: The membership flag

class StepElement_Array1OfSurfaceSection(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (Handle_StepElement_SurfaceSection &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array1OfSurfaceSection &) –
Return type:	StepElement_Array1OfSurfaceSection

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_SurfaceSection

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (Handle_StepElement_SurfaceSection &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array1OfSurfaceSection &) –
Return type:	StepElement_Array1OfSurfaceSection

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_SurfaceSection &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_SurfaceSection

thisown¶: The membership flag

class StepElement_Array1OfVolumeElementPurpose(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (StepElement_VolumeElementPurpose &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array1OfVolumeElementPurpose &) –
Return type:	StepElement_Array1OfVolumeElementPurpose

ChangeValue()¶

Parameters:	Index (int) –
Return type:	StepElement_VolumeElementPurpose

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (StepElement_VolumeElementPurpose &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array1OfVolumeElementPurpose &) –
Return type:	StepElement_Array1OfVolumeElementPurpose

SetValue()¶

Parameters:	Index (int) – Value (StepElement_VolumeElementPurpose &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	StepElement_VolumeElementPurpose

thisown¶: The membership flag

class StepElement_Array1OfVolumeElementPurposeMember(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (Handle_StepElement_VolumeElementPurposeMember &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array1OfVolumeElementPurposeMember &) –
Return type:	StepElement_Array1OfVolumeElementPurposeMember

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_VolumeElementPurposeMember

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (Handle_StepElement_VolumeElementPurposeMember &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array1OfVolumeElementPurposeMember &) –
Return type:	StepElement_Array1OfVolumeElementPurposeMember

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_VolumeElementPurposeMember &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_VolumeElementPurposeMember

thisown¶: The membership flag

class StepElement_Array2OfCurveElementPurposeMember(*args)¶

Bases: object

Parameters:	R1 (int) – R2 (int) – C1 (int) – C2 (int) – Item (Handle_StepElement_CurveElementPurposeMember &) – R1 – R2 – C1 – C2 –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array2OfCurveElementPurposeMember &) –
Return type:	StepElement_Array2OfCurveElementPurposeMember

ChangeValue()¶

Parameters:	Row (int) – Col (int) –
Return type:	Handle_StepElement_CurveElementPurposeMember

ColLength()¶

Return type:	int

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (Handle_StepElement_CurveElementPurposeMember &) –
Return type:	None

LowerCol()¶

Return type:	int

LowerRow()¶

Return type:	int

RowLength()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array2OfCurveElementPurposeMember &) –
Return type:	StepElement_Array2OfCurveElementPurposeMember

SetValue()¶

Parameters:	Row (int) – Col (int) – Value (Handle_StepElement_CurveElementPurposeMember &) –
Return type:	None

UpperCol()¶

Return type:	int

UpperRow()¶

Return type:	int

Value()¶

Parameters:	Row (int) – Col (int) –
Return type:	Handle_StepElement_CurveElementPurposeMember

thisown¶: The membership flag

class StepElement_Array2OfSurfaceElementPurpose(*args)¶

Bases: object

Parameters:	R1 (int) – R2 (int) – C1 (int) – C2 (int) – Item (StepElement_SurfaceElementPurpose &) – R1 – R2 – C1 – C2 –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array2OfSurfaceElementPurpose &) –
Return type:	StepElement_Array2OfSurfaceElementPurpose

ChangeValue()¶

Parameters:	Row (int) – Col (int) –
Return type:	StepElement_SurfaceElementPurpose

ColLength()¶

Return type:	int

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (StepElement_SurfaceElementPurpose &) –
Return type:	None

LowerCol()¶

Return type:	int

LowerRow()¶

Return type:	int

RowLength()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array2OfSurfaceElementPurpose &) –
Return type:	StepElement_Array2OfSurfaceElementPurpose

SetValue()¶

Parameters:	Row (int) – Col (int) – Value (StepElement_SurfaceElementPurpose &) –
Return type:	None

UpperCol()¶

Return type:	int

UpperRow()¶

Return type:	int

Value()¶

Parameters:	Row (int) – Col (int) –
Return type:	StepElement_SurfaceElementPurpose

thisown¶: The membership flag

class StepElement_Array2OfSurfaceElementPurposeMember(*args)¶

Bases: object

Parameters:	R1 (int) – R2 (int) – C1 (int) – C2 (int) – Item (Handle_StepElement_SurfaceElementPurposeMember &) – R1 – R2 – C1 – C2 –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_Array2OfSurfaceElementPurposeMember &) –
Return type:	StepElement_Array2OfSurfaceElementPurposeMember

ChangeValue()¶

Parameters:	Row (int) – Col (int) –
Return type:	Handle_StepElement_SurfaceElementPurposeMember

ColLength()¶

Return type:	int

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (Handle_StepElement_SurfaceElementPurposeMember &) –
Return type:	None

LowerCol()¶

Return type:	int

LowerRow()¶

Return type:	int

RowLength()¶

Return type:	int

Set()¶

Parameters:	Other (StepElement_Array2OfSurfaceElementPurposeMember &) –
Return type:	StepElement_Array2OfSurfaceElementPurposeMember

SetValue()¶

Parameters:	Row (int) – Col (int) – Value (Handle_StepElement_SurfaceElementPurposeMember &) –
Return type:	None

UpperCol()¶

Return type:	int

UpperRow()¶

Return type:	int

Value()¶

Parameters:	Row (int) – Col (int) –
Return type:	Handle_StepElement_SurfaceElementPurposeMember

thisown¶: The membership flag

class StepElement_Curve3dElementDescriptor(*args)¶

Bases: OCC.StepElement.StepElement_ElementDescriptor

Empty constructor

Return type:	None

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aElementDescriptor_TopologyOrder (StepElement_ElementOrder) – aElementDescriptor_Description (Handle_TCollection_HAsciiString &) – aPurpose (Handle_StepElement_HArray1OfHSequenceOfCurveElementPurposeMember &) –
Return type:	None

Purpose()¶

Returns field Purpose

Return type:	Handle_StepElement_HArray1OfHSequenceOfCurveElementPurposeMember

SetPurpose()¶

Set field Purpose

Parameters:	Purpose (Handle_StepElement_HArray1OfHSequenceOfCurveElementPurposeMember &) –
Return type:	None

thisown¶: The membership flag

class StepElement_CurveElementEndReleasePacket(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Empty constructor

Return type:	None

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aReleaseFreedom (StepElement_CurveElementFreedom &) – aReleaseStiffness (float) –
Return type:	None

ReleaseFreedom()¶

Returns field ReleaseFreedom

Return type:	StepElement_CurveElementFreedom

ReleaseStiffness()¶

Returns field ReleaseStiffness

Return type:	float

SetReleaseFreedom()¶

Set field ReleaseFreedom

Parameters:	ReleaseFreedom (StepElement_CurveElementFreedom &) –
Return type:	None

SetReleaseStiffness()¶

Set field ReleaseStiffness

Parameters:	ReleaseStiffness (float) –
Return type:	None

thisown¶: The membership flag

class StepElement_CurveElementFreedom(*args)¶

Bases: object

Empty constructor

Return type:	None

ApplicationDefinedDegreeOfFreedom()¶

Returns Value as ApplicationDefinedDegreeOfFreedom (or Null if another type)

Return type:	Handle_TCollection_HAsciiString

CaseMem()¶

Recognizes a items of select member CurveElementFreedomMember 1 -> EnumeratedCurveElementFreedom 2 -> ApplicationDefinedDegreeOfFreedom 0 else

Parameters:	ent (Handle_StepData_SelectMember &) –
Return type:	int

CaseNum()¶

Recognizes a kind of CurveElementFreedom select type return 0

Parameters:	ent (Handle_Standard_Transient &) –
Return type:	int

EnumeratedCurveElementFreedom()¶

Returns Value as EnumeratedCurveElementFreedom (or Null if another type)

Return type:	StepElement_EnumeratedCurveElementFreedom

NewMember()¶

Returns a new select member the type CurveElementFreedomMember

Return type:	Handle_StepData_SelectMember

SetApplicationDefinedDegreeOfFreedom()¶

Set Value for ApplicationDefinedDegreeOfFreedom

Parameters:	aVal (Handle_TCollection_HAsciiString &) –
Return type:	None

SetEnumeratedCurveElementFreedom()¶

Set Value for EnumeratedCurveElementFreedom

Parameters:	aVal (StepElement_EnumeratedCurveElementFreedom) –
Return type:	None

thisown¶: The membership flag

class StepElement_CurveElementFreedomMember(*args)¶

Bases: object

Empty constructor

Return type:	None

GetHandle()¶

HasName()¶

Returns True if has name

Return type:	bool

Matches()¶

Tells if the name of a SelectMember matches a given one;

Parameters:	name (char *) –
Return type:	bool

Name()¶

Returns set name

Return type:	char *

SetName()¶

Set name

Parameters:	name (char *) –
Return type:	bool

thisown¶: The membership flag

class StepElement_CurveElementPurpose(*args)¶

Bases: object

Empty constructor

Return type:	None

ApplicationDefinedElementPurpose()¶

Returns Value as ApplicationDefinedElementPurpose (or Null if another type)

Return type:	Handle_TCollection_HAsciiString

CaseMem()¶

Recognizes a items of select member CurveElementPurposeMember 1 -> EnumeratedCurveElementPurpose 2 -> ApplicationDefinedElementPurpose 0 else

Parameters:	ent (Handle_StepData_SelectMember &) –
Return type:	int

CaseNum()¶

Recognizes a kind of CurveElementPurpose select type return 0

Parameters:	ent (Handle_Standard_Transient &) –
Return type:	int

EnumeratedCurveElementPurpose()¶

Returns Value as EnumeratedCurveElementPurpose (or Null if another type)

Return type:	StepElement_EnumeratedCurveElementPurpose

NewMember()¶

Returns a new select member the type CurveElementPurposeMember

Return type:	Handle_StepData_SelectMember

SetApplicationDefinedElementPurpose()¶

Set Value for ApplicationDefinedElementPurpose

Parameters:	aVal (Handle_TCollection_HAsciiString &) –
Return type:	None

SetEnumeratedCurveElementPurpose()¶

Set Value for EnumeratedCurveElementPurpose

Parameters:	aVal (StepElement_EnumeratedCurveElementPurpose) –
Return type:	None

thisown¶: The membership flag

class StepElement_CurveElementPurposeMember(*args)¶

Bases: object

Empty constructor

Return type:	None

GetHandle()¶

HasName()¶

Returns True if has name

Return type:	bool

Matches()¶

Tells if the name of a SelectMember matches a given one;

Parameters:	name (char *) –
Return type:	bool

Name()¶

Returns set name

Return type:	char *

SetName()¶

Set name

Parameters:	name (char *) –
Return type:	bool

thisown¶: The membership flag

class StepElement_CurveElementSectionDefinition(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Empty constructor

Return type:	None

Description()¶

Returns field Description

Return type:	Handle_TCollection_HAsciiString

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aDescription (Handle_TCollection_HAsciiString &) – aSectionAngle (float) –
Return type:	None

SectionAngle()¶

Returns field SectionAngle

Return type:	float

SetDescription()¶

Set field Description

Parameters:	Description (Handle_TCollection_HAsciiString &) –
Return type:	None

SetSectionAngle()¶

Set field SectionAngle

Parameters:	SectionAngle (float) –
Return type:	None

thisown¶: The membership flag

class StepElement_CurveElementSectionDerivedDefinitions(*args)¶

Bases: OCC.StepElement.StepElement_CurveElementSectionDefinition

Empty constructor

Return type:	None

CrossSectionalArea()¶

Returns field CrossSectionalArea

Return type:	float

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:

aCurveElementSectionDefinition_Description (Handle_TCollection_HAsciiString &) –
aCurveElementSectionDefinition_SectionAngle (float) –
aCrossSectionalArea (float) –
aShearArea (Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue &) –
aSecondMomentOfArea (Handle_TColStd_HArray1OfReal &) –
aTorsionalConstant (float) –
aWarpingConstant (StepElement_MeasureOrUnspecifiedValue &) –
aLocationOfCentroid (Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue &) –
aLocationOfShearCentre (Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue &) –
aLocationOfNonStructuralMass (Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue &) –
aNonStructuralMass (StepElement_MeasureOrUnspecifiedValue &) –
aPolarMoment (StepElement_MeasureOrUnspecifiedValue &) –

Return type:

None

LocationOfCentroid()¶

Returns field LocationOfCentroid

Return type:	Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue

LocationOfNonStructuralMass()¶

Returns field LocationOfNonStructuralMass

Return type:	Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue

LocationOfShearCentre()¶

Returns field LocationOfShearCentre

Return type:	Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue

NonStructuralMass()¶

Returns field NonStructuralMass

Return type:	StepElement_MeasureOrUnspecifiedValue

PolarMoment()¶

Returns field PolarMoment

Return type:	StepElement_MeasureOrUnspecifiedValue

SecondMomentOfArea()¶

Returns field SecondMomentOfArea

Return type:	Handle_TColStd_HArray1OfReal

SetCrossSectionalArea()¶

Set field CrossSectionalArea

Parameters:	CrossSectionalArea (float) –
Return type:	None

SetLocationOfCentroid()¶

Set field LocationOfCentroid

Parameters:	LocationOfCentroid (Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue &) –
Return type:	None

SetLocationOfNonStructuralMass()¶

Set field LocationOfNonStructuralMass

Parameters:	LocationOfNonStructuralMass (Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue &) –
Return type:	None

SetLocationOfShearCentre()¶

Set field LocationOfShearCentre

Parameters:	LocationOfShearCentre (Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue &) –
Return type:	None

SetNonStructuralMass()¶

Set field NonStructuralMass

Parameters:	NonStructuralMass (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

SetPolarMoment()¶

Set field PolarMoment

Parameters:	PolarMoment (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

SetSecondMomentOfArea()¶

Set field SecondMomentOfArea

Parameters:	SecondMomentOfArea (Handle_TColStd_HArray1OfReal &) –
Return type:	None

SetShearArea()¶

Set field ShearArea

Parameters:	ShearArea (Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue &) –
Return type:	None

SetTorsionalConstant()¶

Set field TorsionalConstant

Parameters:	TorsionalConstant (float) –
Return type:	None

SetWarpingConstant()¶

Set field WarpingConstant

Parameters:	WarpingConstant (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

ShearArea()¶

Returns field ShearArea

Return type:	Handle_StepElement_HArray1OfMeasureOrUnspecifiedValue

TorsionalConstant()¶

Returns field TorsionalConstant

Return type:	float

WarpingConstant()¶

Returns field WarpingConstant

Return type:	StepElement_MeasureOrUnspecifiedValue

thisown¶: The membership flag

class StepElement_ElementAspect(*args)¶

Bases: object

Empty constructor

Return type:	None

CaseMem()¶

Recognizes a items of select member ElementAspectMember 1 -> ElementVolume 2 -> Volume3dFace 3 -> Volume2dFace 4 -> Volume3dEdge 5 -> Volume2dEdge 6 -> Surface3dFace 7 -> Surface2dFace 8 -> Surface3dEdge 9 -> Surface2dEdge 10 -> CurveEdge 0 else

Parameters:	ent (Handle_StepData_SelectMember &) –
Return type:	int

CaseNum()¶

Recognizes a kind of ElementAspect select type return 0

Parameters:	ent (Handle_Standard_Transient &) –
Return type:	int

CurveEdge()¶

Returns Value as CurveEdge (or Null if another type)

Return type:	StepElement_CurveEdge

ElementVolume()¶

Returns Value as ElementVolume (or Null if another type)

Return type:	StepElement_ElementVolume

NewMember()¶

Returns a new select member the type ElementAspectMember

Return type:	Handle_StepData_SelectMember

SetCurveEdge()¶

Set Value for CurveEdge

Parameters:	aVal (StepElement_CurveEdge) –
Return type:	None

SetElementVolume()¶

Set Value for ElementVolume

Parameters:	aVal (StepElement_ElementVolume) –
Return type:	None

SetSurface2dEdge()¶

Set Value for Surface2dEdge

Parameters:	aVal (int) –
Return type:	None

SetSurface2dFace()¶

Set Value for Surface2dFace

Parameters:	aVal (int) –
Return type:	None

SetSurface3dEdge()¶

Set Value for Surface3dEdge

Parameters:	aVal (int) –
Return type:	None

SetSurface3dFace()¶

Set Value for Surface3dFace

Parameters:	aVal (int) –
Return type:	None

SetVolume2dEdge()¶

Set Value for Volume2dEdge

Parameters:	aVal (int) –
Return type:	None

SetVolume2dFace()¶

Set Value for Volume2dFace

Parameters:	aVal (int) –
Return type:	None

SetVolume3dEdge()¶

Set Value for Volume3dEdge

Parameters:	aVal (int) –
Return type:	None

SetVolume3dFace()¶

Set Value for Volume3dFace

Parameters:	aVal (int) –
Return type:	None

Surface2dEdge()¶

Returns Value as Surface2dEdge (or Null if another type)

Return type:	int

Surface2dFace()¶

Returns Value as Surface2dFace (or Null if another type)

Return type:	int

Surface3dEdge()¶

Returns Value as Surface3dEdge (or Null if another type)

Return type:	int

Surface3dFace()¶

Returns Value as Surface3dFace (or Null if another type)

Return type:	int

Volume2dEdge()¶

Returns Value as Volume2dEdge (or Null if another type)

Return type:	int

Volume2dFace()¶

Returns Value as Volume2dFace (or Null if another type)

Return type:	int

Volume3dEdge()¶

Returns Value as Volume3dEdge (or Null if another type)

Return type:	int

Volume3dFace()¶

Returns Value as Volume3dFace (or Null if another type)

Return type:	int

thisown¶: The membership flag

class StepElement_ElementAspectMember(*args)¶

Bases: object

Empty constructor

Return type:	None

GetHandle()¶

HasName()¶

Returns True if has name

Return type:	bool

Matches()¶

Tells if the name of a SelectMember matches a given one;

Parameters:	name (char *) –
Return type:	bool

Name()¶

Returns set name

Return type:	char *

SetName()¶

Set name

Parameters:	name (char *) –
Return type:	bool

thisown¶: The membership flag

class StepElement_ElementDescriptor(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Empty constructor

Return type:	None

Description()¶

Returns field Description

Return type:	Handle_TCollection_HAsciiString

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aTopologyOrder (StepElement_ElementOrder) – aDescription (Handle_TCollection_HAsciiString &) –
Return type:	None

SetDescription()¶

Set field Description

Parameters:	Description (Handle_TCollection_HAsciiString &) –
Return type:	None

SetTopologyOrder()¶

Set field TopologyOrder

Parameters:	TopologyOrder (StepElement_ElementOrder) –
Return type:	None

TopologyOrder()¶

Returns field TopologyOrder

Return type:	StepElement_ElementOrder

thisown¶: The membership flag

class StepElement_ElementMaterial(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Empty constructor

Return type:	None

Description()¶

Returns field Description

Return type:	Handle_TCollection_HAsciiString

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aMaterialId (Handle_TCollection_HAsciiString &) – aDescription (Handle_TCollection_HAsciiString &) – aProperties (Handle_StepRepr_HArray1OfMaterialPropertyRepresentation &) –
Return type:	None

MaterialId()¶

Returns field MaterialId

Return type:	Handle_TCollection_HAsciiString

Properties()¶

Returns field Properties

Return type:	Handle_StepRepr_HArray1OfMaterialPropertyRepresentation

SetDescription()¶

Set field Description

Parameters:	Description (Handle_TCollection_HAsciiString &) –
Return type:	None

SetMaterialId()¶

Set field MaterialId

Parameters:	MaterialId (Handle_TCollection_HAsciiString &) –
Return type:	None

SetProperties()¶

Set field Properties

Parameters:	Properties (Handle_StepRepr_HArray1OfMaterialPropertyRepresentation &) –
Return type:	None

thisown¶: The membership flag

class StepElement_HArray1OfCurveElementEndReleasePacket(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (Handle_StepElement_CurveElementEndReleasePacket &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	StepElement_Array1OfCurveElementEndReleasePacket

ChangeArray1()¶

Return type:	StepElement_Array1OfCurveElementEndReleasePacket

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementEndReleasePacket

GetHandle()¶

Init()¶

Parameters:	V (Handle_StepElement_CurveElementEndReleasePacket &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_CurveElementEndReleasePacket &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementEndReleasePacket

thisown¶: The membership flag

class StepElement_HArray1OfCurveElementSectionDefinition(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (Handle_StepElement_CurveElementSectionDefinition &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	StepElement_Array1OfCurveElementSectionDefinition

ChangeArray1()¶

Return type:	StepElement_Array1OfCurveElementSectionDefinition

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementSectionDefinition

GetHandle()¶

Init()¶

Parameters:	V (Handle_StepElement_CurveElementSectionDefinition &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_CurveElementSectionDefinition &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementSectionDefinition

thisown¶: The membership flag

class StepElement_HArray1OfHSequenceOfCurveElementPurposeMember(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	StepElement_Array1OfHSequenceOfCurveElementPurposeMember

ChangeArray1()¶

Return type:	StepElement_Array1OfHSequenceOfCurveElementPurposeMember

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_HSequenceOfCurveElementPurposeMember

GetHandle()¶

Init()¶

Parameters:	V (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_HSequenceOfCurveElementPurposeMember

thisown¶: The membership flag

class StepElement_HArray1OfHSequenceOfSurfaceElementPurposeMember(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	StepElement_Array1OfHSequenceOfSurfaceElementPurposeMember

ChangeArray1()¶

Return type:	StepElement_Array1OfHSequenceOfSurfaceElementPurposeMember

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_HSequenceOfSurfaceElementPurposeMember

GetHandle()¶

Init()¶

Parameters:	V (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_HSequenceOfSurfaceElementPurposeMember

thisown¶: The membership flag

class StepElement_HArray1OfMeasureOrUnspecifiedValue(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	StepElement_Array1OfMeasureOrUnspecifiedValue

ChangeArray1()¶

Return type:	StepElement_Array1OfMeasureOrUnspecifiedValue

ChangeValue()¶

Parameters:	Index (int) –
Return type:	StepElement_MeasureOrUnspecifiedValue

GetHandle()¶

Init()¶

Parameters:	V (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	StepElement_MeasureOrUnspecifiedValue

thisown¶: The membership flag

class StepElement_HArray1OfSurfaceSection(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (Handle_StepElement_SurfaceSection &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	StepElement_Array1OfSurfaceSection

ChangeArray1()¶

Return type:	StepElement_Array1OfSurfaceSection

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_SurfaceSection

GetHandle()¶

Init()¶

Parameters:	V (Handle_StepElement_SurfaceSection &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_SurfaceSection &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_SurfaceSection

thisown¶: The membership flag

class StepElement_HArray1OfVolumeElementPurpose(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (StepElement_VolumeElementPurpose &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	StepElement_Array1OfVolumeElementPurpose

ChangeArray1()¶

Return type:	StepElement_Array1OfVolumeElementPurpose

ChangeValue()¶

Parameters:	Index (int) –
Return type:	StepElement_VolumeElementPurpose

GetHandle()¶

Init()¶

Parameters:	V (StepElement_VolumeElementPurpose &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (StepElement_VolumeElementPurpose &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	StepElement_VolumeElementPurpose

thisown¶: The membership flag

class StepElement_HArray1OfVolumeElementPurposeMember(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (Handle_StepElement_VolumeElementPurposeMember &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	StepElement_Array1OfVolumeElementPurposeMember

ChangeArray1()¶

Return type:	StepElement_Array1OfVolumeElementPurposeMember

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_VolumeElementPurposeMember

GetHandle()¶

Init()¶

Parameters:	V (Handle_StepElement_VolumeElementPurposeMember &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (Handle_StepElement_VolumeElementPurposeMember &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_VolumeElementPurposeMember

thisown¶: The membership flag

class StepElement_HArray2OfCurveElementPurposeMember(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	R1 (int) – R2 (int) – C1 (int) – C2 (int) – R1 – R2 – C1 – C2 – V (Handle_StepElement_CurveElementPurposeMember &) –
Return type:	None
Return type:	None

Array2()¶

Return type:	StepElement_Array2OfCurveElementPurposeMember

ChangeArray2()¶

Return type:	StepElement_Array2OfCurveElementPurposeMember

ChangeValue()¶

Parameters:	Row (int) – Col (int) –
Return type:	Handle_StepElement_CurveElementPurposeMember

ColLength()¶

Return type:	int

GetHandle()¶

Init()¶

Parameters:	V (Handle_StepElement_CurveElementPurposeMember &) –
Return type:	None

LowerCol()¶

Return type:	int

LowerRow()¶

Return type:	int

RowLength()¶

Return type:	int

SetValue()¶

Parameters:	Row (int) – Col (int) – Value (Handle_StepElement_CurveElementPurposeMember &) –
Return type:	None

UpperCol()¶

Return type:	int

UpperRow()¶

Return type:	int

Value()¶

Parameters:	Row (int) – Col (int) –
Return type:	Handle_StepElement_CurveElementPurposeMember

thisown¶: The membership flag

class StepElement_HArray2OfSurfaceElementPurpose(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	R1 (int) – R2 (int) – C1 (int) – C2 (int) – R1 – R2 – C1 – C2 – V (StepElement_SurfaceElementPurpose &) –
Return type:	None
Return type:	None

Array2()¶

Return type:	StepElement_Array2OfSurfaceElementPurpose

ChangeArray2()¶

Return type:	StepElement_Array2OfSurfaceElementPurpose

ChangeValue()¶

Parameters:	Row (int) – Col (int) –
Return type:	StepElement_SurfaceElementPurpose

ColLength()¶

Return type:	int

GetHandle()¶

Init()¶

Parameters:	V (StepElement_SurfaceElementPurpose &) –
Return type:	None

LowerCol()¶

Return type:	int

LowerRow()¶

Return type:	int

RowLength()¶

Return type:	int

SetValue()¶

Parameters:	Row (int) – Col (int) – Value (StepElement_SurfaceElementPurpose &) –
Return type:	None

UpperCol()¶

Return type:	int

UpperRow()¶

Return type:	int

Value()¶

Parameters:	Row (int) – Col (int) –
Return type:	StepElement_SurfaceElementPurpose

thisown¶: The membership flag

class StepElement_HArray2OfSurfaceElementPurposeMember(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	R1 (int) – R2 (int) – C1 (int) – C2 (int) – R1 – R2 – C1 – C2 – V (Handle_StepElement_SurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

Array2()¶

Return type:	StepElement_Array2OfSurfaceElementPurposeMember

ChangeArray2()¶

Return type:	StepElement_Array2OfSurfaceElementPurposeMember

ChangeValue()¶

Parameters:	Row (int) – Col (int) –
Return type:	Handle_StepElement_SurfaceElementPurposeMember

ColLength()¶

Return type:	int

GetHandle()¶

Init()¶

Parameters:	V (Handle_StepElement_SurfaceElementPurposeMember &) –
Return type:	None

LowerCol()¶

Return type:	int

LowerRow()¶

Return type:	int

RowLength()¶

Return type:	int

SetValue()¶

Parameters:	Row (int) – Col (int) – Value (Handle_StepElement_SurfaceElementPurposeMember &) –
Return type:	None

UpperCol()¶

Return type:	int

UpperRow()¶

Return type:	int

Value()¶

Parameters:	Row (int) – Col (int) –
Return type:	Handle_StepElement_SurfaceElementPurposeMember

thisown¶: The membership flag

class StepElement_HSequenceOfCurveElementPurposeMember(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Return type:	None

Append()¶

Parameters:	anItem (Handle_StepElement_CurveElementPurposeMember &) – aSequence (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

ChangeSequence()¶

Return type:	StepElement_SequenceOfCurveElementPurposeMember

ChangeValue()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_CurveElementPurposeMember

Clear()¶

Return type:	None

Exchange()¶

Parameters:	anIndex (int) – anOtherIndex (int) –
Return type:	None

GetHandle()¶

InsertAfter()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_CurveElementPurposeMember &) – anIndex – aSequence (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_CurveElementPurposeMember &) – anIndex – aSequence (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

IsEmpty()¶

Return type:	bool

Length()¶

Return type:	int

Prepend()¶

Parameters:	anItem (Handle_StepElement_CurveElementPurposeMember &) – aSequence (Handle_StepElement_HSequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	anIndex (int) – fromIndex (int) – toIndex (int) –
Return type:	None
Return type:	None

Reverse()¶

Return type:	None

Sequence()¶

Return type:	StepElement_SequenceOfCurveElementPurposeMember

SetValue()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_CurveElementPurposeMember &) –
Return type:	None

Split()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_HSequenceOfCurveElementPurposeMember

Value()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_CurveElementPurposeMember

thisown¶: The membership flag

class StepElement_HSequenceOfCurveElementSectionDefinition(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Return type:	None

Append()¶

Parameters:	anItem (Handle_StepElement_CurveElementSectionDefinition &) – aSequence (Handle_StepElement_HSequenceOfCurveElementSectionDefinition &) –
Return type:	None
Return type:	None

ChangeSequence()¶

Return type:	StepElement_SequenceOfCurveElementSectionDefinition

ChangeValue()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_CurveElementSectionDefinition

Clear()¶

Return type:	None

Exchange()¶

Parameters:	anIndex (int) – anOtherIndex (int) –
Return type:	None

GetHandle()¶

InsertAfter()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_CurveElementSectionDefinition &) – anIndex – aSequence (Handle_StepElement_HSequenceOfCurveElementSectionDefinition &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_CurveElementSectionDefinition &) – anIndex – aSequence (Handle_StepElement_HSequenceOfCurveElementSectionDefinition &) –
Return type:	None
Return type:	None

IsEmpty()¶

Return type:	bool

Length()¶

Return type:	int

Prepend()¶

Parameters:	anItem (Handle_StepElement_CurveElementSectionDefinition &) – aSequence (Handle_StepElement_HSequenceOfCurveElementSectionDefinition &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	anIndex (int) – fromIndex (int) – toIndex (int) –
Return type:	None
Return type:	None

Reverse()¶

Return type:	None

Sequence()¶

Return type:	StepElement_SequenceOfCurveElementSectionDefinition

SetValue()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_CurveElementSectionDefinition &) –
Return type:	None

Split()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_HSequenceOfCurveElementSectionDefinition

Value()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_CurveElementSectionDefinition

thisown¶: The membership flag

class StepElement_HSequenceOfElementMaterial(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Return type:	None

Append()¶

Parameters:	anItem (Handle_StepElement_ElementMaterial &) – aSequence (Handle_StepElement_HSequenceOfElementMaterial &) –
Return type:	None
Return type:	None

ChangeSequence()¶

Return type:	StepElement_SequenceOfElementMaterial

ChangeValue()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_ElementMaterial

Clear()¶

Return type:	None

Exchange()¶

Parameters:	anIndex (int) – anOtherIndex (int) –
Return type:	None

GetHandle()¶

InsertAfter()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_ElementMaterial &) – anIndex – aSequence (Handle_StepElement_HSequenceOfElementMaterial &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_ElementMaterial &) – anIndex – aSequence (Handle_StepElement_HSequenceOfElementMaterial &) –
Return type:	None
Return type:	None

IsEmpty()¶

Return type:	bool

Length()¶

Return type:	int

Prepend()¶

Parameters:	anItem (Handle_StepElement_ElementMaterial &) – aSequence (Handle_StepElement_HSequenceOfElementMaterial &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	anIndex (int) – fromIndex (int) – toIndex (int) –
Return type:	None
Return type:	None

Reverse()¶

Return type:	None

Sequence()¶

Return type:	StepElement_SequenceOfElementMaterial

SetValue()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_ElementMaterial &) –
Return type:	None

Split()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_HSequenceOfElementMaterial

Value()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_ElementMaterial

thisown¶: The membership flag

class StepElement_HSequenceOfSurfaceElementPurposeMember(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Return type:	None

Append()¶

Parameters:	anItem (Handle_StepElement_SurfaceElementPurposeMember &) – aSequence (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

ChangeSequence()¶

Return type:	StepElement_SequenceOfSurfaceElementPurposeMember

ChangeValue()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_SurfaceElementPurposeMember

Clear()¶

Return type:	None

Exchange()¶

Parameters:	anIndex (int) – anOtherIndex (int) –
Return type:	None

GetHandle()¶

InsertAfter()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_SurfaceElementPurposeMember &) – anIndex – aSequence (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_SurfaceElementPurposeMember &) – anIndex – aSequence (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

IsEmpty()¶

Return type:	bool

Length()¶

Return type:	int

Prepend()¶

Parameters:	anItem (Handle_StepElement_SurfaceElementPurposeMember &) – aSequence (Handle_StepElement_HSequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	anIndex (int) – fromIndex (int) – toIndex (int) –
Return type:	None
Return type:	None

Reverse()¶

Return type:	None

Sequence()¶

Return type:	StepElement_SequenceOfSurfaceElementPurposeMember

SetValue()¶

Parameters:	anIndex (int) – anItem (Handle_StepElement_SurfaceElementPurposeMember &) –
Return type:	None

Split()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_HSequenceOfSurfaceElementPurposeMember

Value()¶

Parameters:	anIndex (int) –
Return type:	Handle_StepElement_SurfaceElementPurposeMember

thisown¶: The membership flag

class StepElement_MeasureOrUnspecifiedValue(*args)¶

Bases: object

Empty constructor

Return type:	None

CaseMem()¶

Recognizes a items of select member MeasureOrUnspecifiedValueMember 1 -> ContextDependentMeasure 2 -> UnspecifiedValue 0 else

Parameters:	ent (Handle_StepData_SelectMember &) –
Return type:	int

CaseNum()¶

Recognizes a kind of MeasureOrUnspecifiedValue select type return 0

Parameters:	ent (Handle_Standard_Transient &) –
Return type:	int

ContextDependentMeasure()¶

Returns Value as ContextDependentMeasure (or Null if another type)

Return type:	float

NewMember()¶

Returns a new select member the type MeasureOrUnspecifiedValueMember

Return type:	Handle_StepData_SelectMember

SetContextDependentMeasure()¶

Set Value for ContextDependentMeasure

Parameters:	aVal (float) –
Return type:	None

SetUnspecifiedValue()¶

Set Value for UnspecifiedValue

Parameters:	aVal (StepElement_UnspecifiedValue) –
Return type:	None

UnspecifiedValue()¶

Returns Value as UnspecifiedValue (or Null if another type)

Return type:	StepElement_UnspecifiedValue

thisown¶: The membership flag

class StepElement_MeasureOrUnspecifiedValueMember(*args)¶

Bases: object

Empty constructor

Return type:	None

GetHandle()¶

HasName()¶

Returns True if has name

Return type:	bool

Matches()¶

Tells if the name of a SelectMember matches a given one;

Parameters:	name (char *) –
Return type:	bool

Name()¶

Returns set name

Return type:	char *

SetName()¶

Set name

Parameters:	name (char *) –
Return type:	bool

thisown¶: The membership flag

class StepElement_SequenceNodeOfSequenceOfCurveElementPurposeMember(*args)¶

Bases: OCC.TCollection.TCollection_SeqNode

Parameters:	I (Handle_StepElement_CurveElementPurposeMember &) – n (TCollection_SeqNodePtr &) – p (TCollection_SeqNodePtr &) –
Return type:	None

GetHandle()¶

Value()¶

Return type:	Handle_StepElement_CurveElementPurposeMember

thisown¶: The membership flag

class StepElement_SequenceNodeOfSequenceOfCurveElementSectionDefinition(*args)¶

Bases: OCC.TCollection.TCollection_SeqNode

Parameters:	I (Handle_StepElement_CurveElementSectionDefinition &) – n (TCollection_SeqNodePtr &) – p (TCollection_SeqNodePtr &) –
Return type:	None

GetHandle()¶

Value()¶

Return type:	Handle_StepElement_CurveElementSectionDefinition

thisown¶: The membership flag

class StepElement_SequenceNodeOfSequenceOfElementMaterial(*args)¶

Bases: OCC.TCollection.TCollection_SeqNode

Parameters:	I (Handle_StepElement_ElementMaterial &) – n (TCollection_SeqNodePtr &) – p (TCollection_SeqNodePtr &) –
Return type:	None

GetHandle()¶

Value()¶

Return type:	Handle_StepElement_ElementMaterial

thisown¶: The membership flag

class StepElement_SequenceNodeOfSequenceOfSurfaceElementPurposeMember(*args)¶

Bases: OCC.TCollection.TCollection_SeqNode

Parameters:	I (Handle_StepElement_SurfaceElementPurposeMember &) – n (TCollection_SeqNodePtr &) – p (TCollection_SeqNodePtr &) –
Return type:	None

GetHandle()¶

Value()¶

Return type:	Handle_StepElement_SurfaceElementPurposeMember

thisown¶: The membership flag

class StepElement_SequenceOfCurveElementPurposeMember(*args)¶

Bases: OCC.TCollection.TCollection_BaseSequence

Return type:	None
Parameters:	Other (StepElement_SequenceOfCurveElementPurposeMember &) –
Return type:	None

Append()¶

Parameters:	T (Handle_StepElement_CurveElementPurposeMember &) – S (StepElement_SequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_SequenceOfCurveElementPurposeMember &) –
Return type:	StepElement_SequenceOfCurveElementPurposeMember

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementPurposeMember

Clear()¶

Return type:	None

First()¶

Return type:	Handle_StepElement_CurveElementPurposeMember

InsertAfter()¶

Parameters:	Index (int) – T (Handle_StepElement_CurveElementPurposeMember &) – Index – S (StepElement_SequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	Index (int) – T (Handle_StepElement_CurveElementPurposeMember &) – Index – S (StepElement_SequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

Last()¶

Return type:	Handle_StepElement_CurveElementPurposeMember

Prepend()¶

Parameters:	T (Handle_StepElement_CurveElementPurposeMember &) – S (StepElement_SequenceOfCurveElementPurposeMember &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	Index (int) – FromIndex (int) – ToIndex (int) –
Return type:	None
Return type:	None

Set()¶

Parameters:	Other (StepElement_SequenceOfCurveElementPurposeMember &) –
Return type:	StepElement_SequenceOfCurveElementPurposeMember

SetValue()¶

Parameters:	Index (int) – I (Handle_StepElement_CurveElementPurposeMember &) –
Return type:	None

Split()¶

Parameters:	Index (int) – Sub (StepElement_SequenceOfCurveElementPurposeMember &) –
Return type:	None

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementPurposeMember

thisown¶: The membership flag

class StepElement_SequenceOfCurveElementSectionDefinition(*args)¶

Bases: OCC.TCollection.TCollection_BaseSequence

Return type:	None
Parameters:	Other (StepElement_SequenceOfCurveElementSectionDefinition &) –
Return type:	None

Append()¶

Parameters:	T (Handle_StepElement_CurveElementSectionDefinition &) – S (StepElement_SequenceOfCurveElementSectionDefinition &) –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_SequenceOfCurveElementSectionDefinition &) –
Return type:	StepElement_SequenceOfCurveElementSectionDefinition

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementSectionDefinition

Clear()¶

Return type:	None

First()¶

Return type:	Handle_StepElement_CurveElementSectionDefinition

InsertAfter()¶

Parameters:	Index (int) – T (Handle_StepElement_CurveElementSectionDefinition &) – Index – S (StepElement_SequenceOfCurveElementSectionDefinition &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	Index (int) – T (Handle_StepElement_CurveElementSectionDefinition &) – Index – S (StepElement_SequenceOfCurveElementSectionDefinition &) –
Return type:	None
Return type:	None

Last()¶

Return type:	Handle_StepElement_CurveElementSectionDefinition

Prepend()¶

Parameters:	T (Handle_StepElement_CurveElementSectionDefinition &) – S (StepElement_SequenceOfCurveElementSectionDefinition &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	Index (int) – FromIndex (int) – ToIndex (int) –
Return type:	None
Return type:	None

Set()¶

Parameters:	Other (StepElement_SequenceOfCurveElementSectionDefinition &) –
Return type:	StepElement_SequenceOfCurveElementSectionDefinition

SetValue()¶

Parameters:	Index (int) – I (Handle_StepElement_CurveElementSectionDefinition &) –
Return type:	None

Split()¶

Parameters:	Index (int) – Sub (StepElement_SequenceOfCurveElementSectionDefinition &) –
Return type:	None

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_CurveElementSectionDefinition

thisown¶: The membership flag

class StepElement_SequenceOfElementMaterial(*args)¶

Bases: OCC.TCollection.TCollection_BaseSequence

Return type:	None
Parameters:	Other (StepElement_SequenceOfElementMaterial &) –
Return type:	None

Append()¶

Parameters:	T (Handle_StepElement_ElementMaterial &) – S (StepElement_SequenceOfElementMaterial &) –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_SequenceOfElementMaterial &) –
Return type:	StepElement_SequenceOfElementMaterial

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_ElementMaterial

Clear()¶

Return type:	None

First()¶

Return type:	Handle_StepElement_ElementMaterial

InsertAfter()¶

Parameters:	Index (int) – T (Handle_StepElement_ElementMaterial &) – Index – S (StepElement_SequenceOfElementMaterial &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	Index (int) – T (Handle_StepElement_ElementMaterial &) – Index – S (StepElement_SequenceOfElementMaterial &) –
Return type:	None
Return type:	None

Last()¶

Return type:	Handle_StepElement_ElementMaterial

Prepend()¶

Parameters:	T (Handle_StepElement_ElementMaterial &) – S (StepElement_SequenceOfElementMaterial &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	Index (int) – FromIndex (int) – ToIndex (int) –
Return type:	None
Return type:	None

Set()¶

Parameters:	Other (StepElement_SequenceOfElementMaterial &) –
Return type:	StepElement_SequenceOfElementMaterial

SetValue()¶

Parameters:	Index (int) – I (Handle_StepElement_ElementMaterial &) –
Return type:	None

Split()¶

Parameters:	Index (int) – Sub (StepElement_SequenceOfElementMaterial &) –
Return type:	None

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_ElementMaterial

thisown¶: The membership flag

class StepElement_SequenceOfSurfaceElementPurposeMember(*args)¶

Bases: OCC.TCollection.TCollection_BaseSequence

Return type:	None
Parameters:	Other (StepElement_SequenceOfSurfaceElementPurposeMember &) –
Return type:	None

Append()¶

Parameters:	T (Handle_StepElement_SurfaceElementPurposeMember &) – S (StepElement_SequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (StepElement_SequenceOfSurfaceElementPurposeMember &) –
Return type:	StepElement_SequenceOfSurfaceElementPurposeMember

ChangeValue()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_SurfaceElementPurposeMember

Clear()¶

Return type:	None

First()¶

Return type:	Handle_StepElement_SurfaceElementPurposeMember

InsertAfter()¶

Parameters:	Index (int) – T (Handle_StepElement_SurfaceElementPurposeMember &) – Index – S (StepElement_SequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	Index (int) – T (Handle_StepElement_SurfaceElementPurposeMember &) – Index – S (StepElement_SequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

Last()¶

Return type:	Handle_StepElement_SurfaceElementPurposeMember

Prepend()¶

Parameters:	T (Handle_StepElement_SurfaceElementPurposeMember &) – S (StepElement_SequenceOfSurfaceElementPurposeMember &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	Index (int) – FromIndex (int) – ToIndex (int) –
Return type:	None
Return type:	None

Set()¶

Parameters:	Other (StepElement_SequenceOfSurfaceElementPurposeMember &) –
Return type:	StepElement_SequenceOfSurfaceElementPurposeMember

SetValue()¶

Parameters:	Index (int) – I (Handle_StepElement_SurfaceElementPurposeMember &) –
Return type:	None

Split()¶

Parameters:	Index (int) – Sub (StepElement_SequenceOfSurfaceElementPurposeMember &) –
Return type:	None

Value()¶

Parameters:	Index (int) –
Return type:	Handle_StepElement_SurfaceElementPurposeMember

thisown¶: The membership flag

class StepElement_Surface3dElementDescriptor(*args)¶

Bases: OCC.StepElement.StepElement_ElementDescriptor

Empty constructor

Return type:	None

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aElementDescriptor_TopologyOrder (StepElement_ElementOrder) – aElementDescriptor_Description (Handle_TCollection_HAsciiString &) – aPurpose (Handle_StepElement_HArray1OfHSequenceOfSurfaceElementPurposeMember &) – aShape (StepElement_Element2dShape) –
Return type:	None

Purpose()¶

Returns field Purpose

Return type:	Handle_StepElement_HArray1OfHSequenceOfSurfaceElementPurposeMember

SetPurpose()¶

Set field Purpose

Parameters:	Purpose (Handle_StepElement_HArray1OfHSequenceOfSurfaceElementPurposeMember &) –
Return type:	None

SetShape()¶

Set field Shape

Parameters:	Shape (StepElement_Element2dShape) –
Return type:	None

Shape()¶

Returns field Shape

Return type:	StepElement_Element2dShape

thisown¶: The membership flag

class StepElement_SurfaceElementProperty(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Empty constructor

Return type:	None

Description()¶

Returns field Description

Return type:	Handle_TCollection_HAsciiString

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aPropertyId (Handle_TCollection_HAsciiString &) – aDescription (Handle_TCollection_HAsciiString &) – aSection (Handle_StepElement_SurfaceSectionField &) –
Return type:	None

PropertyId()¶

Returns field PropertyId

Return type:	Handle_TCollection_HAsciiString

Section()¶

Returns field Section

Return type:	Handle_StepElement_SurfaceSectionField

SetDescription()¶

Set field Description

Parameters:	Description (Handle_TCollection_HAsciiString &) –
Return type:	None

SetPropertyId()¶

Set field PropertyId

Parameters:	PropertyId (Handle_TCollection_HAsciiString &) –
Return type:	None

SetSection()¶

Set field Section

Parameters:	Section (Handle_StepElement_SurfaceSectionField &) –
Return type:	None

thisown¶: The membership flag

class StepElement_SurfaceElementPurpose(*args)¶

Bases: object

Empty constructor

Return type:	None

ApplicationDefinedElementPurpose()¶

Returns Value as ApplicationDefinedElementPurpose (or Null if another type)

Return type:	Handle_TCollection_HAsciiString

CaseMem()¶

Recognizes a items of select member SurfaceElementPurposeMember 1 -> EnumeratedSurfaceElementPurpose 2 -> ApplicationDefinedElementPurpose 0 else

Parameters:	ent (Handle_StepData_SelectMember &) –
Return type:	int

CaseNum()¶

Recognizes a kind of SurfaceElementPurpose select type return 0

Parameters:	ent (Handle_Standard_Transient &) –
Return type:	int

EnumeratedSurfaceElementPurpose()¶

Returns Value as EnumeratedSurfaceElementPurpose (or Null if another type)

Return type:	StepElement_EnumeratedSurfaceElementPurpose

NewMember()¶

Returns a new select member the type SurfaceElementPurposeMember

Return type:	Handle_StepData_SelectMember

SetApplicationDefinedElementPurpose()¶

Set Value for ApplicationDefinedElementPurpose

Parameters:	aVal (Handle_TCollection_HAsciiString &) –
Return type:	None

SetEnumeratedSurfaceElementPurpose()¶

Set Value for EnumeratedSurfaceElementPurpose

Parameters:	aVal (StepElement_EnumeratedSurfaceElementPurpose) –
Return type:	None

thisown¶: The membership flag

class StepElement_SurfaceElementPurposeMember(*args)¶

Bases: object

Empty constructor

Return type:	None

GetHandle()¶

HasName()¶

Returns True if has name

Return type:	bool

Matches()¶

Tells if the name of a SelectMember matches a given one;

Parameters:	name (char *) –
Return type:	bool

Name()¶

Returns set name

Return type:	char *

SetName()¶

Set name

Parameters:	name (char *) –
Return type:	bool

thisown¶: The membership flag

class StepElement_SurfaceSection(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Empty constructor

Return type:	None

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aOffset (StepElement_MeasureOrUnspecifiedValue &) – aNonStructuralMass (StepElement_MeasureOrUnspecifiedValue &) – aNonStructuralMassOffset (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

NonStructuralMass()¶

Returns field NonStructuralMass

Return type:	StepElement_MeasureOrUnspecifiedValue

NonStructuralMassOffset()¶

Returns field NonStructuralMassOffset

Return type:	StepElement_MeasureOrUnspecifiedValue

Offset()¶

Returns field Offset

Return type:	StepElement_MeasureOrUnspecifiedValue

SetNonStructuralMass()¶

Set field NonStructuralMass

Parameters:	NonStructuralMass (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

SetNonStructuralMassOffset()¶

Set field NonStructuralMassOffset

Parameters:	NonStructuralMassOffset (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

SetOffset()¶

Set field Offset

Parameters:	Offset (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

thisown¶: The membership flag

class StepElement_SurfaceSectionField(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Empty constructor

Return type:	None

GetHandle()¶

thisown¶: The membership flag

class StepElement_SurfaceSectionFieldConstant(*args)¶

Bases: OCC.StepElement.StepElement_SurfaceSectionField

Empty constructor

Return type:	None

Definition()¶

Returns field Definition

Return type:	Handle_StepElement_SurfaceSection

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aDefinition (Handle_StepElement_SurfaceSection &) –
Return type:	None

SetDefinition()¶

Set field Definition

Parameters:	Definition (Handle_StepElement_SurfaceSection &) –
Return type:	None

thisown¶: The membership flag

class StepElement_SurfaceSectionFieldVarying(*args)¶

Bases: OCC.StepElement.StepElement_SurfaceSectionField

Empty constructor

Return type:	None

AdditionalNodeValues()¶

Returns field AdditionalNodeValues

Return type:	bool

Definitions()¶

Returns field Definitions

Return type:	Handle_StepElement_HArray1OfSurfaceSection

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aDefinitions (Handle_StepElement_HArray1OfSurfaceSection &) – aAdditionalNodeValues (bool) –
Return type:	None

SetAdditionalNodeValues()¶

Set field AdditionalNodeValues

Parameters:	AdditionalNodeValues (bool) –
Return type:	None

SetDefinitions()¶

Set field Definitions

Parameters:	Definitions (Handle_StepElement_HArray1OfSurfaceSection &) –
Return type:	None

thisown¶: The membership flag

class StepElement_UniformSurfaceSection(*args)¶

Bases: OCC.StepElement.StepElement_SurfaceSection

Empty constructor

Return type:	None

BendingThickness()¶

Returns field BendingThickness

Return type:	StepElement_MeasureOrUnspecifiedValue

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:

aSurfaceSection_Offset (StepElement_MeasureOrUnspecifiedValue &) –
aSurfaceSection_NonStructuralMass (StepElement_MeasureOrUnspecifiedValue &) –
aSurfaceSection_NonStructuralMassOffset (StepElement_MeasureOrUnspecifiedValue &) –
aThickness (float) –
aBendingThickness (StepElement_MeasureOrUnspecifiedValue &) –
aShearThickness (StepElement_MeasureOrUnspecifiedValue &) –

Return type:

None

SetBendingThickness()¶

Set field BendingThickness

Parameters:	BendingThickness (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

SetShearThickness()¶

Set field ShearThickness

Parameters:	ShearThickness (StepElement_MeasureOrUnspecifiedValue &) –
Return type:	None

SetThickness()¶

Set field Thickness

Parameters:	Thickness (float) –
Return type:	None

ShearThickness()¶

Returns field ShearThickness

Return type:	StepElement_MeasureOrUnspecifiedValue

Thickness()¶

Returns field Thickness

Return type:	float

thisown¶: The membership flag

class StepElement_Volume3dElementDescriptor(*args)¶

Bases: OCC.StepElement.StepElement_ElementDescriptor

Empty constructor

Return type:	None

GetHandle()¶

Init()¶

Initialize all fields (own and inherited)

Parameters:	aElementDescriptor_TopologyOrder (StepElement_ElementOrder) – aElementDescriptor_Description (Handle_TCollection_HAsciiString &) – aPurpose (Handle_StepElement_HArray1OfVolumeElementPurposeMember &) – aShape (StepElement_Volume3dElementShape) –
Return type:	None

Purpose()¶

Returns field Purpose

Return type:	Handle_StepElement_HArray1OfVolumeElementPurposeMember

SetPurpose()¶

Set field Purpose

Parameters:	Purpose (Handle_StepElement_HArray1OfVolumeElementPurposeMember &) –
Return type:	None

SetShape()¶

Set field Shape

Parameters:	Shape (StepElement_Volume3dElementShape) –
Return type:	None

Shape()¶

Returns field Shape

Return type:	StepElement_Volume3dElementShape

thisown¶: The membership flag

class StepElement_VolumeElementPurpose(*args)¶

Bases: object

Empty constructor

Return type:	None

ApplicationDefinedElementPurpose()¶

Returns Value as ApplicationDefinedElementPurpose (or Null if another type)

Return type:	Handle_TCollection_HAsciiString

CaseMem()¶

Recognizes a items of select member VolumeElementPurposeMember 1 -> EnumeratedVolumeElementPurpose 2 -> ApplicationDefinedElementPurpose 0 else

Parameters:	ent (Handle_StepData_SelectMember &) –
Return type:	int

CaseNum()¶

Recognizes a kind of VolumeElementPurpose select type return 0

Parameters:	ent (Handle_Standard_Transient &) –
Return type:	int

EnumeratedVolumeElementPurpose()¶

Returns Value as EnumeratedVolumeElementPurpose (or Null if another type)

Return type:	StepElement_EnumeratedVolumeElementPurpose

NewMember()¶

Returns a new select member the type VolumeElementPurposeMember

Return type:	Handle_StepData_SelectMember

SetApplicationDefinedElementPurpose()¶

Set Value for ApplicationDefinedElementPurpose

Parameters:	aVal (Handle_TCollection_HAsciiString &) –
Return type:	None

SetEnumeratedVolumeElementPurpose()¶

Set Value for EnumeratedVolumeElementPurpose

Parameters:	aVal (StepElement_EnumeratedVolumeElementPurpose) –
Return type:	None

thisown¶: The membership flag

class StepElement_VolumeElementPurposeMember(*args)¶

Bases: object

Empty constructor

Return type:	None

GetHandle()¶

HasName()¶

Returns True if has name

Return type:	bool

Matches()¶

Tells if the name of a SelectMember matches a given one;

Parameters:	name (char *) –
Return type:	bool

Name()¶

Returns set name

Return type:	char *

SetName()¶

Set name

Parameters:	name (char *) –
Return type:	bool

thisown¶: The membership flag

class SwigPyIterator(*args, **kwargs)¶

Bases: object

advance()¶

copy()¶

decr()¶

distance()¶

equal()¶

incr()¶

next()¶

previous()¶

thisown¶: The membership flag

value()¶

new_instancemethod(func, inst, cls)¶

register_handle(handle, base_object)¶: Inserts the handle into the base object to prevent memory corruption in certain cases