OCC.TopTools module¶

class Handle_TopTools_DataMapNodeOfDataMapOfIntegerListOfShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfIntegerShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfOrientedShapeInteger(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfOrientedShapeShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfShapeInteger(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfShapeListOfInteger(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfShapeListOfShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfShapeReal(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfShapeSequenceOfShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_DataMapNodeOfDataMapOfShapeShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_HArray1OfListOfShape(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_HArray1OfShape(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_HArray2OfShape(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_HSequenceOfShape(*args)¶

Bases: OCC.MMgt.Handle_MMgt_TShared

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeAddress(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeListOfShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_IndexedMapNodeOfIndexedMapOfOrientedShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_IndexedMapNodeOfIndexedMapOfShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_ListNodeOfListOfShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_SequenceNodeOfSequenceOfShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_SeqNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_StdMapNodeOfMapOfOrientedShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class Handle_TopTools_StdMapNodeOfMapOfShape(*args)¶

Bases: OCC.TCollection.Handle_TCollection_MapNode

static DownCast()¶

GetObject()¶

IsNull()¶

Nullify()¶

thisown¶: The membership flag

class SwigPyIterator(*args, **kwargs)¶

Bases: object

advance()¶

copy()¶

decr()¶

distance()¶

equal()¶

incr()¶

next()¶

previous()¶

thisown¶: The membership flag

value()¶

class TopTools_Array1OfListOfShape(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (TopTools_ListOfShape &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (TopTools_Array1OfListOfShape &) –
Return type:	TopTools_Array1OfListOfShape

ChangeValue()¶

Parameters:	Index (int) –
Return type:	TopTools_ListOfShape

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (TopTools_ListOfShape &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (TopTools_Array1OfListOfShape &) –
Return type:	TopTools_Array1OfListOfShape

SetValue()¶

Parameters:	Index (int) – Value (TopTools_ListOfShape &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	TopTools_ListOfShape

thisown¶: The membership flag

class TopTools_Array1OfShape(*args)¶

Bases: object

Parameters:	Low (int) – Up (int) – Item (TopoDS_Shape &) – Low – Up –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (TopTools_Array1OfShape &) –
Return type:	TopTools_Array1OfShape

ChangeValue()¶

Parameters:	Index (int) –
Return type:	TopoDS_Shape

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (TopoDS_Shape &) –
Return type:	None

IsAllocated()¶

Return type:	bool

Length()¶

Return type:	int

Lower()¶

Return type:	int

Set()¶

Parameters:	Other (TopTools_Array1OfShape &) –
Return type:	TopTools_Array1OfShape

SetValue()¶

Parameters:	Index (int) – Value (TopoDS_Shape &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_Array2OfShape(*args)¶

Bases: object

Parameters:	R1 (int) – R2 (int) – C1 (int) – C2 (int) – Item (TopoDS_Shape &) – R1 – R2 – C1 – C2 –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (TopTools_Array2OfShape &) –
Return type:	TopTools_Array2OfShape

ChangeValue()¶

Parameters:	Row (int) – Col (int) –
Return type:	TopoDS_Shape

ColLength()¶

Return type:	int

Destroy()¶

Return type:	None

Init()¶

Parameters:	V (TopoDS_Shape &) –
Return type:	None

LowerCol()¶

Return type:	int

LowerRow()¶

Return type:	int

RowLength()¶

Return type:	int

Set()¶

Parameters:	Other (TopTools_Array2OfShape &) –
Return type:	TopTools_Array2OfShape

SetValue()¶

Parameters:	Row (int) – Col (int) – Value (TopoDS_Shape &) –
Return type:	None

UpperCol()¶

Return type:	int

UpperRow()¶

Return type:	int

Value()¶

Parameters:	Row (int) – Col (int) –
Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfIntegerListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfIntegerListOfShape &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfIntegerListOfShape &) –
Return type:	None

Key()¶

Return type:	int

Value()¶

Return type:	TopTools_ListOfShape

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfIntegerShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfIntegerShape &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfIntegerShape &) –
Return type:	None

Key()¶

Return type:	int

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfOrientedShapeInteger(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfOrientedShapeInteger &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfOrientedShapeInteger &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	int

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfOrientedShapeShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfOrientedShapeShape &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfOrientedShapeShape &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfShapeInteger(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfShapeInteger &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfShapeInteger &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	int

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfShapeListOfInteger(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfShapeListOfInteger &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfShapeListOfInteger &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TColStd_ListOfInteger

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfShapeListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfShapeListOfShape &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfShapeListOfShape &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TopTools_ListOfShape

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfShapeReal(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfShapeReal &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfShapeReal &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	float

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfShapeSequenceOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfShapeSequenceOfShape &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfShapeSequenceOfShape &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TopTools_SequenceOfShape

thisown¶: The membership flag

class TopTools_DataMapIteratorOfDataMapOfShapeShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_DataMapOfShapeShape &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_DataMapOfShapeShape &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfIntegerListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (int &) – I (TopTools_ListOfShape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetKey()¶: TopTools_DataMapNodeOfDataMapOfIntegerListOfShape_GetKey(TopTools_DataMapNodeOfDataMapOfIntegerListOfShape self) -> Standard_Integer

SetKey()¶: TopTools_DataMapNodeOfDataMapOfIntegerListOfShape_SetKey(TopTools_DataMapNodeOfDataMapOfIntegerListOfShape self, Standard_Integer value)

Value()¶

Return type:	TopTools_ListOfShape

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfIntegerShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (int &) – I (TopoDS_Shape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetKey()¶: TopTools_DataMapNodeOfDataMapOfIntegerShape_GetKey(TopTools_DataMapNodeOfDataMapOfIntegerShape self) -> Standard_Integer

SetKey()¶: TopTools_DataMapNodeOfDataMapOfIntegerShape_SetKey(TopTools_DataMapNodeOfDataMapOfIntegerShape self, Standard_Integer value)

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfOrientedShapeInteger(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – I (int &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetValue()¶: TopTools_DataMapNodeOfDataMapOfOrientedShapeInteger_GetValue(TopTools_DataMapNodeOfDataMapOfOrientedShapeInteger self) -> Standard_Integer

Key()¶

Return type:	TopoDS_Shape

SetValue()¶: TopTools_DataMapNodeOfDataMapOfOrientedShapeInteger_SetValue(TopTools_DataMapNodeOfDataMapOfOrientedShapeInteger self, Standard_Integer value)

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfOrientedShapeShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – I (TopoDS_Shape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfShapeInteger(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – I (int &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetValue()¶: TopTools_DataMapNodeOfDataMapOfShapeInteger_GetValue(TopTools_DataMapNodeOfDataMapOfShapeInteger self) -> Standard_Integer

Key()¶

Return type:	TopoDS_Shape

SetValue()¶: TopTools_DataMapNodeOfDataMapOfShapeInteger_SetValue(TopTools_DataMapNodeOfDataMapOfShapeInteger self, Standard_Integer value)

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfShapeListOfInteger(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – I (TColStd_ListOfInteger &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TColStd_ListOfInteger

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfShapeListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – I (TopTools_ListOfShape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TopTools_ListOfShape

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfShapeReal(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – I (float &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetValue()¶: TopTools_DataMapNodeOfDataMapOfShapeReal_GetValue(TopTools_DataMapNodeOfDataMapOfShapeReal self) -> Standard_Real

Key()¶

Return type:	TopoDS_Shape

SetValue()¶: TopTools_DataMapNodeOfDataMapOfShapeReal_SetValue(TopTools_DataMapNodeOfDataMapOfShapeReal self, Standard_Real value)

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfShapeSequenceOfShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – I (TopTools_SequenceOfShape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TopTools_SequenceOfShape

thisown¶: The membership flag

class TopTools_DataMapNodeOfDataMapOfShapeShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – I (TopoDS_Shape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

Key()¶

Return type:	TopoDS_Shape

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_DataMapOfIntegerListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfIntegerListOfShape &) –
Return type:	TopTools_DataMapOfIntegerListOfShape

Bind()¶

Parameters:	K (int &) – I (TopTools_ListOfShape &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (int &) –
Return type:	TopTools_ListOfShape

ChangeFind1()¶

Parameters:	K (int &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (int &) –
Return type:	TopTools_ListOfShape

Find1()¶

Parameters:	K (int &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (int &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfIntegerListOfShape &) –
Return type:	TopTools_DataMapOfIntegerListOfShape

UnBind()¶

Parameters:	K (int &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfIntegerShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfIntegerShape &) –
Return type:	TopTools_DataMapOfIntegerShape

Bind()¶

Parameters:	K (int &) – I (TopoDS_Shape &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (int &) –
Return type:	TopoDS_Shape

ChangeFind1()¶

Parameters:	K (int &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (int &) –
Return type:	TopoDS_Shape

Find1()¶

Parameters:	K (int &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (int &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfIntegerShape &) –
Return type:	TopTools_DataMapOfIntegerShape

UnBind()¶

Parameters:	K (int &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfOrientedShapeInteger(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfOrientedShapeInteger &) –
Return type:	TopTools_DataMapOfOrientedShapeInteger

Bind()¶

Parameters:	K (TopoDS_Shape &) – I (int &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

ChangeFind1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

Find1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfOrientedShapeInteger &) –
Return type:	TopTools_DataMapOfOrientedShapeInteger

UnBind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfOrientedShapeShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfOrientedShapeShape &) –
Return type:	TopTools_DataMapOfOrientedShapeShape

Bind()¶

Parameters:	K (TopoDS_Shape &) – I (TopoDS_Shape &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopoDS_Shape

ChangeFind1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopoDS_Shape

Find1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfOrientedShapeShape &) –
Return type:	TopTools_DataMapOfOrientedShapeShape

UnBind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfShapeInteger(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfShapeInteger &) –
Return type:	TopTools_DataMapOfShapeInteger

Bind()¶

Parameters:	K (TopoDS_Shape &) – I (int &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

ChangeFind1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

Find1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfShapeInteger &) –
Return type:	TopTools_DataMapOfShapeInteger

UnBind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfShapeListOfInteger(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfShapeListOfInteger &) –
Return type:	TopTools_DataMapOfShapeListOfInteger

Bind()¶

Parameters:	K (TopoDS_Shape &) – I (TColStd_ListOfInteger &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TColStd_ListOfInteger

ChangeFind1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TColStd_ListOfInteger

Find1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfShapeListOfInteger &) –
Return type:	TopTools_DataMapOfShapeListOfInteger

UnBind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfShapeListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfShapeListOfShape &) –
Return type:	TopTools_DataMapOfShapeListOfShape

Bind()¶

Parameters:	K (TopoDS_Shape &) – I (TopTools_ListOfShape &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopTools_ListOfShape

ChangeFind1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopTools_ListOfShape

Find1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfShapeListOfShape &) –
Return type:	TopTools_DataMapOfShapeListOfShape

UnBind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfShapeReal(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfShapeReal &) –
Return type:	TopTools_DataMapOfShapeReal

Bind()¶

Parameters:	K (TopoDS_Shape &) – I (float &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	float

ChangeFind1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	float

Find1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfShapeReal &) –
Return type:	TopTools_DataMapOfShapeReal

UnBind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfShapeSequenceOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfShapeSequenceOfShape &) –
Return type:	TopTools_DataMapOfShapeSequenceOfShape

Bind()¶

Parameters:	K (TopoDS_Shape &) – I (TopTools_SequenceOfShape &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopTools_SequenceOfShape

ChangeFind1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopTools_SequenceOfShape

Find1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfShapeSequenceOfShape &) –
Return type:	TopTools_DataMapOfShapeSequenceOfShape

UnBind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_DataMapOfShapeShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Assign()¶

Parameters:	Other (TopTools_DataMapOfShapeShape &) –
Return type:	TopTools_DataMapOfShapeShape

Bind()¶

Parameters:	K (TopoDS_Shape &) – I (TopoDS_Shape &) –
Return type:	bool

ChangeFind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopoDS_Shape

ChangeFind1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Find()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopoDS_Shape

Find1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

IsBound()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Set()¶

Parameters:	Other (TopTools_DataMapOfShapeShape &) –
Return type:	TopTools_DataMapOfShapeShape

UnBind()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

class TopTools_HArray1OfListOfShape(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (TopTools_ListOfShape &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	TopTools_Array1OfListOfShape

ChangeArray1()¶

Return type:	TopTools_Array1OfListOfShape

ChangeValue()¶

Parameters:	Index (int) –
Return type:	TopTools_ListOfShape

GetHandle()¶

Init()¶

Parameters:	V (TopTools_ListOfShape &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (TopTools_ListOfShape &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	TopTools_ListOfShape

thisown¶: The membership flag

class TopTools_HArray1OfShape(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	Low (int) – Up (int) – Low – Up – V (TopoDS_Shape &) –
Return type:	None
Return type:	None

Array1()¶

Return type:	TopTools_Array1OfShape

ChangeArray1()¶

Return type:	TopTools_Array1OfShape

ChangeValue()¶

Parameters:	Index (int) –
Return type:	TopoDS_Shape

GetHandle()¶

Init()¶

Parameters:	V (TopoDS_Shape &) –
Return type:	None

Length()¶

Return type:	int

Lower()¶

Return type:	int

SetValue()¶

Parameters:	Index (int) – Value (TopoDS_Shape &) –
Return type:	None

Upper()¶

Return type:	int

Value()¶

Parameters:	Index (int) –
Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_HArray2OfShape(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Parameters:	R1 (int) – R2 (int) – C1 (int) – C2 (int) – R1 – R2 – C1 – C2 – V (TopoDS_Shape &) –
Return type:	None
Return type:	None

Array2()¶

Return type:	TopTools_Array2OfShape

ChangeArray2()¶

Return type:	TopTools_Array2OfShape

ChangeValue()¶

Parameters:	Row (int) – Col (int) –
Return type:	TopoDS_Shape

ColLength()¶

Return type:	int

GetHandle()¶

Init()¶

Parameters:	V (TopoDS_Shape &) –
Return type:	None

LowerCol()¶

Return type:	int

LowerRow()¶

Return type:	int

RowLength()¶

Return type:	int

SetValue()¶

Parameters:	Row (int) – Col (int) – Value (TopoDS_Shape &) –
Return type:	None

UpperCol()¶

Return type:	int

UpperRow()¶

Return type:	int

Value()¶

Parameters:	Row (int) – Col (int) –
Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_HSequenceOfShape(*args)¶

Bases: OCC.MMgt.MMgt_TShared

Return type:	None

Append()¶

Parameters:	anItem (TopoDS_Shape &) – aSequence (Handle_TopTools_HSequenceOfShape &) –
Return type:	None
Return type:	None

ChangeSequence()¶

Return type:	TopTools_SequenceOfShape

ChangeValue()¶

Parameters:	anIndex (int) –
Return type:	TopoDS_Shape

Clear()¶

Return type:	None

Exchange()¶

Parameters:	anIndex (int) – anOtherIndex (int) –
Return type:	None

GetHandle()¶

InsertAfter()¶

Parameters:	anIndex (int) – anItem (TopoDS_Shape &) – anIndex – aSequence (Handle_TopTools_HSequenceOfShape &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	anIndex (int) – anItem (TopoDS_Shape &) – anIndex – aSequence (Handle_TopTools_HSequenceOfShape &) –
Return type:	None
Return type:	None

IsEmpty()¶

Return type:	bool

Length()¶

Return type:	int

Prepend()¶

Parameters:	anItem (TopoDS_Shape &) – aSequence (Handle_TopTools_HSequenceOfShape &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	anIndex (int) – fromIndex (int) – toIndex (int) –
Return type:	None
Return type:	None

Reverse()¶

Return type:	None

Sequence()¶

Return type:	TopTools_SequenceOfShape

SetValue()¶

Parameters:	anIndex (int) – anItem (TopoDS_Shape &) –
Return type:	None

Split()¶

Parameters:	anIndex (int) –
Return type:	Handle_TopTools_HSequenceOfShape

Value()¶

Parameters:	anIndex (int) –
Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeAddress(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K1 (TopoDS_Shape &) – K2 (int) – I (Standard_Address &) – n1 (TCollection_MapNodePtr &) – n2 (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetKey2()¶: TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeAddress_GetKey2(TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeAddress self) -> Standard_Integer

Key1()¶

Return type:	TopoDS_Shape

Next2()¶

Return type:	TCollection_MapNodePtr

SetKey2()¶: TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeAddress_SetKey2(TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeAddress self, Standard_Integer value)

Value()¶

Return type:	Standard_Address

thisown¶: The membership flag

class TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K1 (TopoDS_Shape &) – K2 (int) – I (TopTools_ListOfShape &) – n1 (TCollection_MapNodePtr &) – n2 (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetKey2()¶: TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeListOfShape_GetKey2(TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeListOfShape self) -> Standard_Integer

Key1()¶

Return type:	TopoDS_Shape

Next2()¶

Return type:	TCollection_MapNodePtr

SetKey2()¶: TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeListOfShape_SetKey2(TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeListOfShape self, Standard_Integer value)

Value()¶

Return type:	TopTools_ListOfShape

thisown¶: The membership flag

class TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K1 (TopoDS_Shape &) – K2 (int) – I (TopoDS_Shape &) – n1 (TCollection_MapNodePtr &) – n2 (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetKey2()¶: TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeShape_GetKey2(TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeShape self) -> Standard_Integer

Key1()¶

Return type:	TopoDS_Shape

Next2()¶

Return type:	TCollection_MapNodePtr

SetKey2()¶: TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeShape_SetKey2(TopTools_IndexedDataMapNodeOfIndexedDataMapOfShapeShape self, Standard_Integer value)

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_IndexedDataMapOfShapeAddress(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Add()¶

Parameters:	K (TopoDS_Shape &) – I (Standard_Address &) –
Return type:	int

Assign()¶

Parameters:	Other (TopTools_IndexedDataMapOfShapeAddress &) –
Return type:	TopTools_IndexedDataMapOfShapeAddress

ChangeFromIndex()¶

Parameters:	I (int) –
Return type:	Standard_Address

ChangeFromKey()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

ChangeFromKey1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Contains()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

FindFromIndex()¶

Parameters:	I (int) –
Return type:	Standard_Address

FindFromKey()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

FindFromKey1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

FindIndex()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

FindKey()¶

Parameters:	I (int) –
Return type:	TopoDS_Shape

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

RemoveLast()¶

Return type:	None

Set()¶

Parameters:	Other (TopTools_IndexedDataMapOfShapeAddress &) –
Return type:	TopTools_IndexedDataMapOfShapeAddress

Substitute()¶

Parameters:	I (int) – K (TopoDS_Shape &) – T (Standard_Address &) –
Return type:	None

thisown¶: The membership flag

class TopTools_IndexedDataMapOfShapeListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Add()¶

Parameters:	K (TopoDS_Shape &) – I (TopTools_ListOfShape &) –
Return type:	int

Assign()¶

Parameters:	Other (TopTools_IndexedDataMapOfShapeListOfShape &) –
Return type:	TopTools_IndexedDataMapOfShapeListOfShape

ChangeFromIndex()¶

Parameters:	I (int) –
Return type:	TopTools_ListOfShape

ChangeFromKey()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopTools_ListOfShape

ChangeFromKey1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Contains()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

FindFromIndex()¶

Parameters:	I (int) –
Return type:	TopTools_ListOfShape

FindFromKey()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopTools_ListOfShape

FindFromKey1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

FindIndex()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

FindKey()¶

Parameters:	I (int) –
Return type:	TopoDS_Shape

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

RemoveLast()¶

Return type:	None

Set()¶

Parameters:	Other (TopTools_IndexedDataMapOfShapeListOfShape &) –
Return type:	TopTools_IndexedDataMapOfShapeListOfShape

Substitute()¶

Parameters:	I (int) – K (TopoDS_Shape &) – T (TopTools_ListOfShape &) –
Return type:	None

thisown¶: The membership flag

class TopTools_IndexedDataMapOfShapeShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1
Return type:	None

Add()¶

Parameters:	K (TopoDS_Shape &) – I (TopoDS_Shape &) –
Return type:	int

Assign()¶

Parameters:	Other (TopTools_IndexedDataMapOfShapeShape &) –
Return type:	TopTools_IndexedDataMapOfShapeShape

ChangeFromIndex()¶

Parameters:	I (int) –
Return type:	TopoDS_Shape

ChangeFromKey()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopoDS_Shape

ChangeFromKey1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

Clear()¶

Return type:	None

Contains()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

FindFromIndex()¶

Parameters:	I (int) –
Return type:	TopoDS_Shape

FindFromKey()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	TopoDS_Shape

FindFromKey1()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	Standard_Address

FindIndex()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

FindKey()¶

Parameters:	I (int) –
Return type:	TopoDS_Shape

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

RemoveLast()¶

Return type:	None

Set()¶

Parameters:	Other (TopTools_IndexedDataMapOfShapeShape &) –
Return type:	TopTools_IndexedDataMapOfShapeShape

Substitute()¶

Parameters:	I (int) – K (TopoDS_Shape &) – T (TopoDS_Shape &) –
Return type:	None

thisown¶: The membership flag

class TopTools_IndexedMapNodeOfIndexedMapOfOrientedShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K1 (TopoDS_Shape &) – K2 (int) – n1 (TCollection_MapNodePtr &) – n2 (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetKey2()¶: TopTools_IndexedMapNodeOfIndexedMapOfOrientedShape_GetKey2(TopTools_IndexedMapNodeOfIndexedMapOfOrientedShape self) -> Standard_Integer

Key1()¶

Return type:	TopoDS_Shape

Next2()¶

Return type:	TCollection_MapNodePtr

SetKey2()¶: TopTools_IndexedMapNodeOfIndexedMapOfOrientedShape_SetKey2(TopTools_IndexedMapNodeOfIndexedMapOfOrientedShape self, Standard_Integer value)

thisown¶: The membership flag

class TopTools_IndexedMapNodeOfIndexedMapOfShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K1 (TopoDS_Shape &) – K2 (int) – n1 (TCollection_MapNodePtr &) – n2 (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

GetKey2()¶: TopTools_IndexedMapNodeOfIndexedMapOfShape_GetKey2(TopTools_IndexedMapNodeOfIndexedMapOfShape self) -> Standard_Integer

Key1()¶

Return type:	TopoDS_Shape

Next2()¶

Return type:	TCollection_MapNodePtr

SetKey2()¶: TopTools_IndexedMapNodeOfIndexedMapOfShape_SetKey2(TopTools_IndexedMapNodeOfIndexedMapOfShape self, Standard_Integer value)

thisown¶: The membership flag

class TopTools_IndexedMapOfOrientedShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1 Other (TopTools_IndexedMapOfOrientedShape &) –
Return type:	None
Return type:	None

Add()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

Assign()¶

Parameters:	Other (TopTools_IndexedMapOfOrientedShape &) –
Return type:	TopTools_IndexedMapOfOrientedShape

Clear()¶

Return type:	None

Contains()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

FindIndex()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

FindKey()¶

Parameters:	I (int) –
Return type:	TopoDS_Shape

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

RemoveLast()¶

Return type:	None

Set()¶

Parameters:	Other (TopTools_IndexedMapOfOrientedShape &) –
Return type:	TopTools_IndexedMapOfOrientedShape

Substitute()¶

Parameters:	I (int) – K (TopoDS_Shape &) –
Return type:	None

thisown¶: The membership flag

class TopTools_IndexedMapOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1 Other (TopTools_IndexedMapOfShape &) –
Return type:	None
Return type:	None

Add()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

Assign()¶

Parameters:	Other (TopTools_IndexedMapOfShape &) –
Return type:	TopTools_IndexedMapOfShape

Clear()¶

Return type:	None

Contains()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	bool

FindIndex()¶

Parameters:	K (TopoDS_Shape &) –
Return type:	int

FindKey()¶

Parameters:	I (int) –
Return type:	TopoDS_Shape

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

RemoveLast()¶

Return type:	None

Set()¶

Parameters:	Other (TopTools_IndexedMapOfShape &) –
Return type:	TopTools_IndexedMapOfShape

Substitute()¶

Parameters:	I (int) – K (TopoDS_Shape &) –
Return type:	None

thisown¶: The membership flag

class TopTools_ListIteratorOfListOfShape(*args)¶

Bases: object

Return type:	None
Parameters:	L (TopTools_ListOfShape &) –
Return type:	None

Initialize()¶

Parameters:	L (TopTools_ListOfShape &) –
Return type:	None

More()¶

Return type:	bool

Next()¶

Return type:	None

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_ListNodeOfListOfShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	I (TopoDS_Shape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_ListOfShape(*args)¶

Bases: object

Return type:	None
Parameters:	Other (TopTools_ListOfShape &) –
Return type:	None

Append()¶

Parameters:	I (TopoDS_Shape &) – I – theIt (TopTools_ListIteratorOfListOfShape &) – Other (TopTools_ListOfShape &) –
Return type:	None
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (TopTools_ListOfShape &) –
Return type:	None

Clear()¶

Return type:	None

Extent()¶

Return type:	int

First()¶

Return type:	TopoDS_Shape

InsertAfter()¶

Parameters:	I (TopoDS_Shape &) – It (TopTools_ListIteratorOfListOfShape &) – Other (TopTools_ListOfShape &) – It –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	I (TopoDS_Shape &) – It (TopTools_ListIteratorOfListOfShape &) – Other (TopTools_ListOfShape &) – It –
Return type:	None
Return type:	None

IsEmpty()¶

Return type:	bool

Last()¶

Return type:	TopoDS_Shape

Prepend()¶

Parameters:	I (TopoDS_Shape &) – I – theIt (TopTools_ListIteratorOfListOfShape &) – Other (TopTools_ListOfShape &) –
Return type:	None
Return type:	None
Return type:	None

Remove()¶

Parameters:	It (TopTools_ListIteratorOfListOfShape &) –
Return type:	None

RemoveFirst()¶

Return type:	None

Set()¶

Parameters:	Other (TopTools_ListOfShape &) –
Return type:	None

thisown¶: The membership flag

class TopTools_LocationSet(*args)¶

Bases: object

Returns an empty set of locations.

Return type:	None

Add()¶

Incorporate a new Location in the set and returns its index.

Parameters:	L (TopLoc_Location &) –
Return type:	int

Clear()¶

Clears the content of the set.

Return type:	None

DumpToString()¶: TopTools_LocationSet_DumpToString(TopTools_LocationSet self) -> std::string

GetProgress()¶

Return type:	Handle_Message_ProgressIndicator

Index()¶

Returns the index of <L>.

Parameters:	L (TopLoc_Location &) –
Return type:	int

Location()¶

Returns the location of index <I>.

Parameters:	I (int) –
Return type:	TopLoc_Location

ReadFromString()¶: TopTools_LocationSet_ReadFromString(TopTools_LocationSet self, std::string src)

SetProgress()¶

Parameters:	PR (Handle_Message_ProgressIndicator &) –
Return type:	None

WriteToString()¶: TopTools_LocationSet_WriteToString(TopTools_LocationSet self) -> std::string

thisown¶: The membership flag

class TopTools_MapIteratorOfMapOfOrientedShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_MapOfOrientedShape &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_MapOfOrientedShape &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_MapIteratorOfMapOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMapIterator

Return type:	None
Parameters:	aMap (TopTools_MapOfShape &) –
Return type:	None

Initialize()¶

Parameters:	aMap (TopTools_MapOfShape &) –
Return type:	None

Key()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_MapOfOrientedShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1 Other (TopTools_MapOfOrientedShape &) –
Return type:	None
Return type:	None

Add()¶

Parameters:	aKey (TopoDS_Shape &) –
Return type:	bool

Assign()¶

Parameters:	Other (TopTools_MapOfOrientedShape &) –
Return type:	TopTools_MapOfOrientedShape

Clear()¶

Return type:	None

Contains()¶

Parameters:	aKey (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Remove()¶

Parameters:	aKey (TopoDS_Shape &) –
Return type:	bool

Set()¶

Parameters:	Other (TopTools_MapOfOrientedShape &) –
Return type:	TopTools_MapOfOrientedShape

thisown¶: The membership flag

class TopTools_MapOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BasicMap

Parameters:	NbBuckets (int) – default value is 1 Other (TopTools_MapOfShape &) –
Return type:	None
Return type:	None

Add()¶

Parameters:	aKey (TopoDS_Shape &) –
Return type:	bool

Assign()¶

Parameters:	Other (TopTools_MapOfShape &) –
Return type:	TopTools_MapOfShape

Clear()¶

Return type:	None

Contains()¶

Parameters:	aKey (TopoDS_Shape &) –
Return type:	bool

ReSize()¶

Parameters:	NbBuckets (int) –
Return type:	None

Remove()¶

Parameters:	aKey (TopoDS_Shape &) –
Return type:	bool

Set()¶

Parameters:	Other (TopTools_MapOfShape &) –
Return type:	TopTools_MapOfShape

thisown¶: The membership flag

class TopTools_MutexForShapeProvider(*args)¶

Bases: object

Constructor

Return type:	None

CreateMutexForShape()¶

Creates and associates mutex with theShape

Parameters:	theShape (TopoDS_Shape &) –
Return type:	None

CreateMutexesForSubShapes()¶

Creates and associates mutexes with each sub-shape of type theType in theShape.

Parameters:	theShape (TopoDS_Shape &) – theType (TopAbs_ShapeEnum) –
Return type:	None

GetMutex()¶

Returns pointer to mutex associated with theShape. In case when mutex not found returns NULL.

Parameters:	theShape (TopoDS_Shape &) –
Return type:	Standard_Mutex *

RemoveAllMutexes()¶

Removes all mutexes

Return type:	None

thisown¶: The membership flag

class TopTools_OrientedShapeMapHasher¶

Bases: object

static HashCode(*args)¶

Returns a HasCode value for the Key <K> in the range 0..Upper.

Parameters:	S (TopoDS_Shape &) – Upper (int) –
Return type:	int

static IsEqual(*args)¶

Returns True when the two keys are equal. Two same keys must have the same hashcode, the contrary is not necessary.

Parameters:	S1 (TopoDS_Shape &) – S2 (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

TopTools_OrientedShapeMapHasher_HashCode(*args)¶

Returns a HasCode value for the Key <K> in the range 0..Upper.

Parameters:	S (TopoDS_Shape &) – Upper (int) –
Return type:	int

TopTools_OrientedShapeMapHasher_IsEqual(*args)¶

Returns True when the two keys are equal. Two same keys must have the same hashcode, the contrary is not necessary.

Parameters:	S1 (TopoDS_Shape &) – S2 (TopoDS_Shape &) –
Return type:	bool

class TopTools_SequenceNodeOfSequenceOfShape(*args)¶

Bases: OCC.TCollection.TCollection_SeqNode

Parameters:	I (TopoDS_Shape &) – n (TCollection_SeqNodePtr &) – p (TCollection_SeqNodePtr &) –
Return type:	None

GetHandle()¶

Value()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_SequenceOfShape(*args)¶

Bases: OCC.TCollection.TCollection_BaseSequence

Return type:	None
Parameters:	Other (TopTools_SequenceOfShape &) –
Return type:	None

Append()¶

Parameters:	T (TopoDS_Shape &) – S (TopTools_SequenceOfShape &) –
Return type:	None
Return type:	None

Assign()¶

Parameters:	Other (TopTools_SequenceOfShape &) –
Return type:	TopTools_SequenceOfShape

ChangeValue()¶

Parameters:	Index (int) –
Return type:	TopoDS_Shape

Clear()¶

Return type:	None

First()¶

Return type:	TopoDS_Shape

InsertAfter()¶

Parameters:	Index (int) – T (TopoDS_Shape &) – Index – S (TopTools_SequenceOfShape &) –
Return type:	None
Return type:	None

InsertBefore()¶

Parameters:	Index (int) – T (TopoDS_Shape &) – Index – S (TopTools_SequenceOfShape &) –
Return type:	None
Return type:	None

Last()¶

Return type:	TopoDS_Shape

Prepend()¶

Parameters:	T (TopoDS_Shape &) – S (TopTools_SequenceOfShape &) –
Return type:	None
Return type:	None

Remove()¶

Parameters:	Index (int) – FromIndex (int) – ToIndex (int) –
Return type:	None
Return type:	None

Set()¶

Parameters:	Other (TopTools_SequenceOfShape &) –
Return type:	TopTools_SequenceOfShape

SetValue()¶

Parameters:	Index (int) – I (TopoDS_Shape &) –
Return type:	None

Split()¶

Parameters:	Index (int) – Sub (TopTools_SequenceOfShape &) –
Return type:	None

Value()¶

Parameters:	Index (int) –
Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_ShapeMapHasher¶

Bases: object

static HashCode(*args)¶

Returns a HasCode value for the Key <K> in the range 0..Upper.

Parameters:	S (TopoDS_Shape &) – Upper (int) –
Return type:	int

static IsEqual(*args)¶

Returns True when the two keys are the same. Two same keys must have the same hashcode, the contrary is not necessary.

Parameters:	S1 (TopoDS_Shape &) – S2 (TopoDS_Shape &) –
Return type:	bool

thisown¶: The membership flag

TopTools_ShapeMapHasher_HashCode(*args)¶

Returns a HasCode value for the Key <K> in the range 0..Upper.

Parameters:	S (TopoDS_Shape &) – Upper (int) –
Return type:	int

TopTools_ShapeMapHasher_IsEqual(*args)¶

Returns True when the two keys are the same. Two same keys must have the same hashcode, the contrary is not necessary.

Parameters:	S1 (TopoDS_Shape &) – S2 (TopoDS_Shape &) –
Return type:	bool

class TopTools_ShapeSet(*args)¶

Bases: object

Builds an empty ShapeSet.

Return type:	None

Add()¶

Stores <S> and its sub-shape. Returns the index of <S>. The method AddGeometry is called on each sub-shape.

Parameters:	S (TopoDS_Shape &) –
Return type:	int

AddGeometry()¶

Stores the geometry of <S>.

Parameters:	S (TopoDS_Shape &) –
Return type:	void

AddShapes()¶

Inserts the shape <S2> in the shape <S1>. This method must be redefined to use the correct builder.

Parameters:	S1 (TopoDS_Shape &) – S2 (TopoDS_Shape &) –
Return type:	void

ChangeLocations()¶

Return type:	TopTools_LocationSet

Check()¶

This method is called after each new completed shape. <T> is the type. <S> is the shape. In this class it does nothing, but it gives the opportunity in derived classes to perform extra treatment on shapes.

Parameters:	T (TopAbs_ShapeEnum) – S (TopoDS_Shape &) –
Return type:	void

Clear()¶

Clears the content of the set. This method can be redefined.

Return type:	void

Delete()¶

Return type:	void

Dump()¶

Dumps on <OS> the shape <S>. Dumps the orientation, the index of the TShape and the index of the Location.

Parameters:	S (TopoDS_Shape &) – OS (Standard_OStream &) –
Return type:	None

DumpExtent()¶

Dumps the number of objects in me in the string S (Number of shapes of each type)

Parameters:	S (TCollection_AsciiString &) –
Return type:	None

DumpExtentToString()¶: TopTools_ShapeSet_DumpExtentToString(TopTools_ShapeSet self) -> std::string

DumpGeometry()¶

Dumps the geometry of <S> on the stream <OS>.

Parameters:	S (TopoDS_Shape &) – OS (Standard_OStream &) –
Return type:	void

DumpGeometryToString()¶: TopTools_ShapeSet_DumpGeometryToString(TopTools_ShapeSet self) -> std::string

DumpToString()¶: TopTools_ShapeSet_DumpToString(TopTools_ShapeSet self) -> std::string

FormatNb()¶

two formats available for the moment: First: does not write CurveOnSurface UV Points into the file on reading calls Check() method. Second: stores CurveOnSurface UV Points. On reading format is recognized from Version string.

Return type:	int

GetProgress()¶

Return type:	Handle_Message_ProgressIndicator

Index()¶

Returns the index of <S>.

Parameters:	S (TopoDS_Shape &) –
Return type:	int

Locations()¶

Return type:	TopTools_LocationSet

NbShapes()¶

Returns number of shapes read from file.

Return type:	int

Read()¶

Reads from <IS> a shape and returns it in S.

Parameters:	S (TopoDS_Shape &) – IS (Standard_IStream &) –
Return type:	None

ReadFromString()¶: TopTools_ShapeSet_ReadFromString(TopTools_ShapeSet self, std::string src)

ReadGeometry()¶

Reads the geometry of a shape of type <T> from the stream <IS> and returns it in <S>.

Parameters:	T (TopAbs_ShapeEnum) – IS (Standard_IStream &) – S (TopoDS_Shape &) –
Return type:	void

ReadGeometryFromString()¶: TopTools_ShapeSet_ReadGeometryFromString(TopTools_ShapeSet self, std::string src)

SetFormatNb()¶

Parameters:	theFormatNb (int) –
Return type:	None

SetProgress()¶

Parameters:	PR (Handle_Message_ProgressIndicator &) –
Return type:	None

Shape()¶

Returns the sub-shape of index <I>.

Parameters:	I (int) –
Return type:	TopoDS_Shape

Write()¶

Writes on <OS> the shape <S>. Writes the orientation, the index of the TShape and the index of the Location.

Parameters:	S (TopoDS_Shape &) – OS (Standard_OStream &) –
Return type:	None

WriteGeometry()¶

Writes the geometry of <S> on the stream <OS> in a format that can be read back by Read.

Parameters:	S (TopoDS_Shape &) – OS (Standard_OStream &) –
Return type:	void

WriteGeometryToString()¶: TopTools_ShapeSet_WriteGeometryToString(TopTools_ShapeSet self) -> std::string

WriteToString()¶: TopTools_ShapeSet_WriteToString(TopTools_ShapeSet self) -> std::string

thisown¶: The membership flag

class TopTools_StdMapNodeOfMapOfOrientedShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

Key()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

class TopTools_StdMapNodeOfMapOfShape(*args)¶

Bases: OCC.TCollection.TCollection_MapNode

Parameters:	K (TopoDS_Shape &) – n (TCollection_MapNodePtr &) –
Return type:	None

GetHandle()¶

Key()¶

Return type:	TopoDS_Shape

thisown¶: The membership flag

register_handle(handle, base_object)¶: Inserts the handle into the base object to prevent memory corruption in certain cases

class toptools¶

Bases: object

static Dummy(*args)¶

This is to bypass an extraction bug. It will force the inclusion of Standard_Integer.hxx itself including Standard_OStream.hxx at the correct position.

Parameters:	I (int) –
Return type:	void

static Dump(*args)¶

A set of Shapes. Can be dump, wrote or read. Dumps the topological structure of <Sh> on the stream <S>.

Parameters:	Sh (TopoDS_Shape &) – S (Standard_OStream &) –
Return type:	void

thisown¶: The membership flag

toptools_Dummy(*args)¶

This is to bypass an extraction bug. It will force the inclusion of Standard_Integer.hxx itself including Standard_OStream.hxx at the correct position.

Parameters:	I (int) –
Return type:	void

toptools_Dump(*args)¶

A set of Shapes. Can be dump, wrote or read. Dumps the topological structure of <Sh> on the stream <S>.

Parameters:	Sh (TopoDS_Shape &) – S (Standard_OStream &) –
Return type:	void