# ESP32-S3-Box Printer Demo with ESP-IDF This project demonstrates how to use a printer with ESP32-S3-Box. It has been tested and proven to work with this specific model. ## Prerequisites Before you can run this example, make sure you have the following: - An ESP32-S3-Box - The Rust xtensa toolchain, which can be obtained from [esp-rs](https://github.com/esp-rs/). Use the installation instructions provided by [espup](https://github.com/esp-rs/espup#installation) to install it. - The esp-idf SDK. The installation guide can be found at [esp-idf documentation](https://docs.espressif.com/projects/esp-idf/en/stable/esp32s3/get-started/index.html#installation). ## Running the Example Once you have the prerequisites, navigate to this directory and execute the following commands: . ${IDF_PATH}/export.sh idf.py build idf.py flash monitor This will build the project, flash it to your ESP32-S3-Box, and open a monitor to view the output of the device.