Dimension Configuration

• Folder with FreeCAD's "FreeCAD.so" or "FreeCAD.dll" File
  Folder to Store Generated 3D Files

Download

• X Rod

  • Top X Rod Diameter
    Bottom X Rod Diameter
    Length of the Shorter Rod

    
    
• Y Rod

  Left Y Rod Diameter
  Right Y Rod Diameter
  Length of the Shorter Rod

  
  
• Z Rod

  • Right Z Rod Diameter
    Left Z Rod Diameter
    Length of the Shorter Rod

    
    
• Lead Screw

  • Lead Screw Diameter

    
    
• Frame

  • Frame Width
    Frame Height
    Frame Wall Thickness

    
    
• Mounting Hardware

  • Printed Parts Mounting Hole Diameter
    Frame Mounting Bolt Diameter
    Frame Mounting Bolt Head Diameter
    Frame Mounting Bolt Head Thickness

    
    
• Print Bed

  • Diameter of Mounting Bolts
    Thickness of the Heated Build Plate

    
    
• Print Bed Busing Holder

  • The Width of the Print Bed Bushing Support
    Print Bed Busing Holder Max Face to Face

    
    
• Print Bed Support

  • Thickness of the Print Bed Support

    
    
• X Rod Clamp

  • Diameter of the X Rod Clamp Idler Hole

    
    
• X End Motor Plate

  • Diameter of the Idler Hole (As Apposed to the Printed Idler Hole which is Larger)
    X Motor Mount Thickness
    X Motor Mount Width
    Number of Mount Holes on the X End Motor Plate
    Distance from shaft to Mount Holes
    Diameter for Motor Mount Hole
    Distance between Motor Mount Holes and the Edge of the plate
    The Diameter of the X Motor Pully

    
    
• X End Z Rod Holder

  • X End Z Rod Holder Thickness
    Horizontal Distance From Edge of X End Z Rod Holder to the Edges of Mounting Holes
    The Vertical Distance from the Edge of the Largest X Rod to the Edges of the Mounting Holes
    Thickness of the Z Offset Nut
    Distance from shaft to Mount Holes
    The Face to Face Distance of the Z Offset Nut
    The Hole diemter of the Z Offset Bolt

    
    
• Z Motor Mount

  • Number of Motor Mounting Holes
    Distance Between the Motor Shaft and the Mounting Holes
    Diameter of the Mounting Holes
    Minimum Space Between the Edge of the Motor Mounting Holes and the Edge of the Plate
    Thickness of the Z Motor Mount Plate
    Width of the Z Motor Mount Plate
    Motor Mount Hole diameter

    
    
• Y End Motor Plate

  • Thickness of the Y Motor Mount Plate
    Y Motor Mount Width
    Number of Mount Holes on the Y Motor Mount
    Distance from shaft to Mount Holes
    Diameter for Motor Mount Mounting Holes
    Diameter for Motor Mount Shaft Hole
    Distance between Motor Mount Holes and the Edge of the plate
    The Diameter of the Y Motor Pully

    
    
• Extruder Mount Plate

  • Thickness of Extruder Mount Plate
    Diameter of Hot End Mounting Holes

    
    
• Extruder Mount Angle Bracket

  • Width of Angle Iron Used (Also known as L-Stock, Angle and Right Angle Stock)
    Thickness of Angle Used

    
    
• Extruder

  • Width of Extruder Body
    Required Depth for Mounting the Front Edge of the Extruder Body to Back Most Part of the Extruder
    Distance Between the Extruder's Mounting Holes
    Diameter of the Extruder Mounting Holes
    Diameter of the Extruder Filament Hole
    Distance from the Outer Edge of the Extruder to it's Center Line (See Second Picture)

    
    
• Extruder Barrel

  • Width of Extruder Body
    Diameter of the Extruder Body
    Diameter of the Teflon Barrel Liner
    Number of Cooling Fins (Not Including the Top and Bottom Faces)
    Thickness of the Top and Bottom Faces
    Thickness of Metal Around the Barrel Liner
    Space Between Fins
    Diameter of Mounting Holes for Extruder Barrel (A 2.5mm Hole Would Be Tapped To 3mm)
    Depth of Mounting Holes
    Center to Center Distance Between the Hot End Mounting Holes

    
    
• Nozzle

  • Height of Nozzle Body
    Width of Nozzle Body
    Depth of Nozzle Body
    Diameter of Heater Resistor
    Distance Between the Axis of the Resistor and the Outer Edge of the Heater Block
    Diameter of Thermistor Bead
    Depth of Thermistor Mount Hole
    Diameter of Thermistor Retainer Screw
    Depth of Thermistor Retainer Hole
    Diameter of Nozzle
    Diameter of Nozzle Base
    Diameter of the Step Down from the Barrel Liner (A Bit Larger than the Filament Diameter)
    Distance from Tip of the Setp Hole to the Tip of Nozzle
    Drill Point Angle of Drill Bits Used
    Diameter of the Flat Surrounding the Nozzle Hole
    Distance from the Lower Edge of Heater Block to the Center of Thermistor Hole
    Distance from the Outer Edge of the Heater Block to the Center of the Retainer Hole.

    
    
• Cross Bar

  • Diameter of Hole for Y Belt Idler

    
    
• Frame Space

  • Length of Frame Spacers
    Distance Between the Edge of the Side Bar to the Edge of the Frame Spacer

    
    
• X End Stop

  • Height of End Stop Body
    Distance Between the Contact Strips (Surface to Surface not Center to Center)
    Width of the Channels for the Metal Contact Strips
    Depth of the Channels for the Metal Contact Strips
    Minimum Distance Between the Edge of a Feature (Hole or Channel) and the Edge of the Endstop
    Thickness of Endstop Cap

    
    
• Z End Stop

  • Width of the Jog Used to Trap Contacts

    
    
• Lead Screw Coupler

  • Length of the Lead Screw Couplers (Vertical Axis)
    Diameter of lead screw cuttout (Just a bit larger than the lead screw Diameter)
    Diameter of motor shaft cuttout (Just a bit larger than the shaft Diameter)

    
    
• Plater Options

  • Enable
    Width of Printer Build Plate
    Height of Printer Build Plate
    Precision
    Parts Spacing
    Spacing of the Brute Forcing
    Angle of the Brute Forcing

    
    
• Slic3r Options

  • Enable
    Slic3r Configuration

    
    
• Zip Options

  • Zip File Name

    
    

View Errors

View Warnings

View Info Messages

View Debug Messages