CToD (FB)¶

FUNCTION_BLOCK CToD

Short Description¶

Convertion of the Time-components minutes/hours to Time of Day (ToD)

Portrayal¶

Interfaces¶

Inputs¶

Outputs¶

Name
Datatype

Range

Init-Value

Function

todHHMM TOD 0 ... 23:59:59:999
Time format (Time of Day)

Setpoints / Parameters¶

Name
Datatype

Range

Init-Value

Function

iMM INT 0
Minutes (used format: MM Range: 0..59)

iHH INT 0 Festlegung der Stunden im Format HH (0..23)

Functional Description¶

General¶

These Functionblock is used for creating the time of day format Tod#HHMM from the two Time-components iMM and iHH.
The logical input limit of each component are monitored.
If a input is outside the configured bound, then the Output todHHMM is setted to TOD#0:0:0.
For example, this function can be used for the Input method within a visualisation object.
The logical Input Limits of each component are monitored and corrected if necessary.
The logical input limit of each component are monitored.
If a input is outside the configured bound, then the Output todHHMM is setted to TOD#0:0:0.
For example, this function can be used for the Input method within a visualisation object.

Visualization¶

Information¶

Element
Authors

Date
Version
Note

Function
Lukas Pfänder 04.2016 1.0
Initialversion

Programmierung Adam Bartod 04.2016 1.0
Initialversion

Test Jochen Reu / 06.2016 1.0
Initialversion

Documentation
Jochen Reu 10.2017 1.0
Initialversion

Revision Lukas Pfänder 10.2017 0.1.3.0
Documentation

Codesys¶

InOut:

Scope	Name	Type	Initial	Comment
Input	iMM	INT	0	Minutes (used format: MM Range: 0..59)
Input	iHH	INT	0	Festlegung der Stunden im Format HH (0..23)
Output	todHHMM	TOD		Time format (Time of Day)